{"title":"AquaStar Parts","description":"\u003cp\u003eAquaStar parts at Active Pool Supply, genuine OEM and quality aftermarket.\u003c\/p\u003e","products":[{"product_id":"aquastar-pf35000-pipeline-cartridge-filter-replacement","title":"AquaStar Pipeline 250 sqft 31\" Cartridge Filter Replacement","description":"\u003cp\u003eThe AquaStar PF35CART is the 250 sq ft replacement cartridge for the Pipeline PF35000 cartridge filter. It measures 31 in. tall by 11-1\/2 in. in diameter and restores the filter to its original filtering area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the element for the larger Pipeline filter, the one sized for pools up to 35,000 gallons. The smaller Pipeline takes a 200 sq ft, 24 in. cartridge, so measure the height of the one you are replacing before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eShut off the pump, relieve pressure, open the tank, lift out the old cartridge and drop this one in. Check the tank o-ring while it is open and lubricate or replace it as needed.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48624966140116,"sku":"API-051-1001","price":183.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ce8e22ea-a91b-4c8f-ad21-18e28f542de6.png?v=1788656826"},{"product_id":"aquastar-pf27000-pipeline-filter-cartridge-replacement","title":"AquaStar Pipeline 200 Sq Ft 24 in. Filter Cartridge Replacement","description":"\u003cp\u003eThis is the AquaStar PF27CART, the replacement cartridge for the AquaStar PipeLine filter listed as PF27000. It carries 200 sq ft of filter media in one element, 24 in. tall and 11-1\/2 in. in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne cartridge, whole filter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe PipeLine runs a single large element rather than a rack of four, so a change is one part and one lid. Measure the cartridge you take out against the 24 in. height and 11-1\/2 in. diameter before ordering, since cartridge tanks of similar size are easy to confuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCartridges are cleaned, not replaced, until the day cleaning stops working. If a full soak and rinse no longer drops filter pressure back to the clean starting point, or the pleats are torn, matted or permanently grey, the element has reached the end and a new one restores the flow the pump was sized for.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48625748902100,"sku":"API-051-1000","price":166.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3aea9754-291a-4428-82be-3c28b37bb7ec.png?v=1788691627"},{"product_id":"aquastar-skz214-zarstar-skimmer-basket","title":"AquaStar ZarStar Skimmer Basket","description":"\u003cp\u003eThe AquaStar SKZ214 is the genuine replacement skimmer basket for ZarStar skimmers, in the large 19-1\/2 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the extra size buys you\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAquaStar lists this as a large basket that filters more debris than a standard size skimmer basket. Capacity is the practical difference. A basket that fills up stops passing water, and once flow is restricted the skimmer stops skimming and the pump starts working against a restriction. A bigger basket takes longer to get there, which matters most in the weeks when leaves are coming down faster than anyone wants to keep up with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits in the chain\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe skimmer basket is the first stage. It pre-filters debris before that debris reaches the pump basket and the filter, so everything downstream sees less. Keeping this basket in one piece and seated correctly is a small habit that keeps the pump wet end clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBaskets crack at the rim and the handle, and a cracked basket lets exactly the leaves and twigs it was supposed to hold slip past into the line. If yours is split or missing sections of mesh, replace it rather than working around it.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48626309759188,"sku":"API-251-0999","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_832819b8-3e9d-4037-9838-1b97f5a6afe4.jpg?v=1788708018"},{"product_id":"skimmer-wier-plate-w-2-clips","title":"AquaStar Flow Star Skimmer Weir, Dark Gray","description":"\u003cp\u003eThe AquaStar SKWD105 is the Flow Star weir plate assembly in dark gray, supplied with two weir clip locks. It measures 8-3\/8 inches high by 5-1\/8 inches wide and is listed for standard skimmers as well as vinyl and fiberglass skimmers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir is doing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir is the hinged flap at the mouth of the skimmer. It holds a shallow, fast moving layer of water across the throat, which is what pulls leaves, bugs and oils in and stops them washing back out when the pump shuts down. It is a small plastic part carrying a large share of how well the pool surface stays clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it needs changing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeirs go stiff, crack at the hinge, or simply disappear. The symptom is usually the same: debris sitting on the surface all day while the skimmer basket stays empty. Replacing the weir restores the skimming action without touching anything else in the system.\u003c\/p\u003e\u003cp\u003eMeasure the skimmer throat against the 8-3\/8 by 5-1\/8 inch dimensions before ordering, since skimmer openings vary between manufacturers.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48626582880468,"sku":"API-251-1227","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_16e63a06-c7f9-4f7f-aac4-85689400c27d.jpg?v=1788712712"},{"product_id":"2-x-1-5-white-return-diverter-plate","title":"AquaStar 2 in. x 1.5 in. White Return Diverter Plate","description":"\u003cp\u003eThe AquaStar DIV0101 is a white return diverter plate sized 2 in. by 1.5 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA return is the fitting that puts filtered water back into the pool, and where that water is aimed decides how well the pool circulates. Almost every pool has a spot the flow never reaches, usually a corner, the far end of a bench or the space under the steps, and that is exactly where fine debris settles and algae takes hold. A diverter plate turns the return flow so the current sweeps those areas instead of running straight down the middle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 2 in. by 1.5 in. plate in white. Check the size of the fitting you are working with before ordering, since diverter plates are made in more than one size.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48626594087124,"sku":"API-25-9913","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f2e77985-2757-4bcf-9759-ba04a3ee262b.jpg?v=1788712836"},{"product_id":"aquastar-high-temperature-2-threaded-union-unht20","title":"AquaStar High Temperature 2\" Threaded Union","description":"\u003cp\u003eThe AquaStar UNHT20 is a 2 inch high temperature threaded union, 2 in. MIP on one side and a 2 in. socket on the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSelf sealing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe union seals on its own, so there is no Teflon tape to wrap and no dope to apply at the joint. That removes the most common source of a slow drip on a union, which is a tape wrap that was not quite right.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a union belongs there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnions are what make equipment serviceable. When a piece of gear has to come out, the union breaks loose at the nut and both pipe stubs stay put. Without one, the same job means cutting pipe and gluing in couplings.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48627001327828,"sku":"PSU-167968","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_adc8ed4d-d3f9-4666-9f2a-362591e9f671.png?v=1788718929"},{"product_id":"skimmer-wier-plate-w-2-clips-1","title":"AquaStar Flow Star Skimmer Weir Plate","description":"\u003cp\u003eThe AquaStar SKWD101 is the Flow Star weir plate assembly in white, supplied with two weir clip locks. It fits standard skimmers as well as vinyl and fiberglass skimmers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir is the hinged flap sitting in the throat of the skimmer. While the pump runs it lifts, and the narrow gap it creates speeds up the surface water so leaves and film get pulled in rather than drifting past. When the pump shuts off, the weir falls closed and traps everything already in the basket instead of letting it wash straight back into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is worth replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeirs take sun and chemicals for years, and they end up cracked, warped, or simply gone after someone lifts the lid to clear the basket. A pool that used to keep a clean surface and now does not is very often just a missing or broken weir, which makes this one of the cheapest fixes on the equipment pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir plate assembly with two weir clip locks, in white.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48627603898580,"sku":"API-251-1224","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ac672f02-023a-4e42-8645-59b6a2dc7a5a.jpg?v=1788724259"},{"product_id":"skimmer-basket-w-ss-handle","title":"AquaStar Skimmer Basket with Stainless Steel Handle","description":"\u003cp\u003eThe AquaStar SK6 is a white replacement skimmer basket fitted with a stainless steel handle. It measures 7-15\/16 inches in diameter by 5-5\/16 inches deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe handle matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket gets pulled out wet and loaded with leaves, and the handle is usually the first thing to fail on a molded plastic basket. Putting stainless steel in that spot takes the weak point out of the routine part of pool care.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer throats vary, so measure the basket you are replacing against the 7-15\/16 inch diameter and 5-5\/16 inch depth listed here before you order.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48627953729748,"sku":"API-251-1231","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bdd080ab-065f-41a2-bfe1-e754aa973ab1.jpg?v=1788730869"},{"product_id":"skimmer-wier-plate-w-2-clips-2","title":"AquaStar Flow Star Skimmer Weir Plate with 2 Clips, Light Gray","description":"\u003cp\u003eThe AquaStar SKWD103 is a Flow Star weir plate assembly in light gray, supplied with two weir clip locks. It is listed for standard skimmers and for vinyl and fiberglass pool skimmers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir is the hinged plate at the skimmer mouth. It floats up against the incoming flow so water is pulled off in a thin, fast moving layer right at the surface. That is what carries leaves, pollen and oils into the basket rather than letting them drift back out and sink.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComplete with clips\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth weir clip locks come in the package, so a broken or missing weir goes back together in one order rather than two.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48628852752596,"sku":"API-251-1226","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d387e68b-9951-4657-aa70-d540481186e4.jpg?v=1788755352"},{"product_id":"6-bulkhead-w-1-1-2-mip","title":"AquaStar 6\" Bulkhead with 1-1\/2\" MIP","description":"\u003cp\u003eThe AquaStar 615T101 is a 6 inch sumpless bulkhead adapter with a 1-1\/2 inch male threaded connection, supplied in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the mounting point behind a suction outlet cover, listed for the AquaStar 6HPHA series cover and for use with the 1022 female adapter. The sumpless design means the cover fastens to the bulkhead itself rather than to a separate sump body, which suits installations plumbed for that arrangement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing it correctly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo numbers matter: the 6 inch body has to match the cover series, and the 1-1\/2 inch MIP thread has to match the plumbing behind it. Confirm both against what is in the wall or floor before you order.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48628910129364,"sku":"API-251-1074","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_82aa53dc-c59e-4bbd-a672-91b596c2adad.jpg?v=1788757198"},{"product_id":"aquastar-fill-lid-standard-square-10-skimmer-cover-and-frame-white","title":"AquaStar Fill-Lid Fillable Standard Square 10\" Skimmer and Autofill Cover, White","description":"\u003cp\u003eThe AquaStar SFL10101 Fill-Lid is a fillable skimmer and autofill cover supplied with its frame, in the standard square 10 inch size, white. Instead of sitting on the deck as a visible plastic square, it is filled with the deck finish so the skimmer reads as part of the surface around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it disappears\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid accepts natural stone pavers up to 35 mm thick, and internal tabs hold that material in place once it is set. The frame is adjustable, which matters more than it sounds: decks are rarely dead flat, and the adjustment is what lets the finished lid sit level with the surface rather than proud of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial and hardware\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover is a high strength engineered polymer tested to the latest GV154 UV standard, so it holds its color and structure in direct sun. Because it is entirely non-metallic, it does not require bonding and has nothing that can corrode, which is the practical advantage over a stainless lid. The 316 stainless steel screws supplied handle the hardware where fasteners are needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed as compatible with AquaStar skimmers and most standard skimmers. Measure the existing opening and confirm it matches the standard square 10 inch size, and decide on the deck material before installation so the fill depth works out.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48629105033428,"sku":"SPG-251-1054","price":72.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0a25dc58-d089-49f8-894e-a75a2205bb4a.png?v=1788759736"},{"product_id":"light-gray-flush-retrofit-eyeball","title":"AquaStar Light Gray Flush Retrofit Eyeball","description":"\u003cp\u003eThe AquaStar JO103 is a light gray flush retrofit eyeball for pool return fittings. It threads into 1-1\/2 inch FPT plumbing and seats flush inside an existing flush mount fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy retrofit instead of replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplacing a return fitting normally means chipping the old one out of the pool wall, which is slow, messy and easy to get wrong. This part goes inside the fitting that is already there, so a stained or discolored return can be brought back to a clean light gray finish without touching the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is complete: a wrench, a retrofit nut, a retrofit socket, a 1\/2 inch eyeball and a 1 inch eyeball. The two eyeball sizes give you a choice of return flow, a 1\/2 inch for a tighter, faster stream and a 1 inch for a wider, gentler one. The fitting is made in the USA.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48633369624788,"sku":"API-25-4118","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8f8a615a-aef6-4278-9e8c-f8c94bb2d297.jpg?v=1788798475"},{"product_id":"white-flush-retrofit-eyeball","title":"AquaStar White Flush Retrofit Eyeball","description":"\u003cp\u003eThe AquaStar JO101 is a white flush retrofit eyeball for pool returns. It threads into 1-1\/2 in FPT and seats flush inside an existing flush mount fitting, which is what makes it a retrofit rather than a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy retrofit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplacing a wall return the old way means chipping the original fitting out of the shell, patching, and hoping the repair blends. This fitting goes inside the fitting that is already there. You get a fresh white face and a new eyeball without touching the surrounding surface, which saves both time and the cost of a plaster or tile repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is complete: a wrench, a retrofit nut, a retrofit socket, a 1\/2 in eyeball and a 1 in eyeball. The two eyeball sizes let you choose how much the return is restricted, which is how you set the surface circulation pattern in the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish options\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the white version. AquaStar lists black, dark gray and light gray flush retrofit eyeballs under their own part numbers if you are matching darker fittings.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48633450594516,"sku":"API-25-4116","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2cf673a4-a9ec-4a44-a711-047f1008fb04.jpg?v=1788804838"},{"product_id":"aquastar-air-relief-valve-assembly-for-pipeline-filter-pf1025","title":"AquaStar Air Relief Valve Assembly for Pipeline Filter","description":"\u003cp\u003eThe AquaStar PF1025 is the air relief valve assembly for the Pipeline filter. It is the genuine AquaStar part, supplied complete rather than as a bare stem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the relief valve matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery time the pump is shut down, opened up or loses prime, air collects in the top of the filter tank. The relief valve is how that air gets out. Left in, the air pocket reduces the working area of the filter, makes the pressure gauge read oddly and puts the tank under stored pressure that has nowhere to go until someone loosens the lid clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRelief valves live outdoors, get turned by hand every service visit and take the full sun. They crack, seize or start weeping around the stem long before anything else on the filter wears out. If yours no longer seals when closed, or will not open without a fight, change the assembly rather than fighting it.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48633662537940,"sku":"API-051-1002","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_28348be1-c3d9-4968-82aa-d86a9a9e5aff.png?v=1788808393"},{"product_id":"4-floor-return-fitting","title":"AquaStar 4\" Floor Return Fitting, White","description":"\u003cp\u003eThe AquaStar 4DIV101 is a 4 inch adjustable floor return fitting in white, with a water stop built into the fitting itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diverter plate is molded as one piece rather than assembled from several, which is the difference that shows up under commercial duty cycles. The fitting includes a 2 in by 1-1\/2 in slip pipe adapter, adjusts through a full 360 degrees and is rated for flow up to 80 GPM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is a UV resistant engineered polymer ABS and the screws are 316 stainless steel. Both choices matter in a pool floor, where a fitting sits in chlorinated water permanently and gets stepped on by everyone who uses the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAiming the return\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the fitting adjusts through a full circle, you can point the return to suit the circulation pattern of the pool rather than accepting whatever direction the plumbing happened to land in.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48633666011348,"sku":"API-25-1106","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_80c7acaf-44a3-4ea7-b3f0-8e465d404ae6.jpg?v=1788808419"},{"product_id":"7-umbrella-sleeve","title":"AquaStar 7 1\/2\" Tan Umbrella Stand with Sleeve and Center Cap","description":"\u003cp\u003eAquaStar US108 is a 7 1\/2\" tan umbrella stand supplied with its decorative sleeve and center cap. It gives the deck a permanent socket that will take an umbrella, a volleyball pole or a tiki torch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is installed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand is set into a hole formed in the gunite while the shell is being built or resurfaced. Pool finish is then applied over the top of the stand, and once that finish is in place the decorative sleeve and the center cap drop in to complete it. Because the anchor is buried in the shell rather than bolted to the surface, there is nothing standing proud of the deck when the pocket is not in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLiving with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLeave the cap in when the socket is empty and the deck reads as one clean surface. Lift the cap out and the same pocket holds a shade umbrella through summer, a volleyball net post for a game, or a torch in the evening.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48633931301076,"sku":"API-25-1236","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_18c9d2f6-3acb-4cc1-a547-d0b3b8ea3a64.jpg?v=1788817465"},{"product_id":"aquastar-skz216-filter-bag-for-zarstar-skimmer-and-pre-filter","title":"AquaStar Filter Bag for ZarStar Skimmer and Pre-Filter","description":"\u003cp\u003eThe AquaStar SKZ216 is the 300 micron filter bag for the ZarStar skimmer and the ZarStar pre-filter. It turns the skimmer into a first stage of filtration rather than just a leaf trap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a bag and not just a basket\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket stops leaves and the larger material. Everything smaller carries on to the pump basket and then to the filter. The 300 micron bag catches that finer debris at the skimmer, which keeps the pump basket cleaner and takes load off the filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eServicing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bag comes out for emptying the same way a basket does. How often depends on the tree cover and the season, and a bag that is loading up quickly is a sign the pool is pulling in more fine debris than usual.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634285097172,"sku":"API-251-SKZ216","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9bc1ed45-4d00-40ef-99cc-cf51bc849512.jpg?v=1788828142"},{"product_id":"dark-gray-flush-retrofit-eyeball","title":"AquaStar Dark Gray Flush Retrofit Eyeball","description":"\u003cp\u003eThe AquaStar JO105 is the dark gray flush retrofit eyeball. It threads into 1-1\/2 inch FPT and sits flush inside an existing flush mount fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy retrofit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReturn fittings get chalky, stained and brittle long before anything else in the pool does, and replacing one the hard way means chipping it out of the wall and repairing the finish around it. This fitting drops into the flush mount fitting that is already there. The old fitting stays put, the new face covers it, and the return looks new again in dark gray without a patch to hide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit includes the wrench for installation, a retrofit nut, a retrofit socket, and both a 1\/2 inch and a 1 inch eyeball. The two eyeballs let you set the return flow: the smaller opening throws a faster, more directed stream for circulation, the larger one moves the same water more gently. AquaStar builds the fitting in the United States.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634426523860,"sku":"API-25-4120","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9e81393e-ab99-4346-ac18-b7efda6d9dd7.jpg?v=1788830478"},{"product_id":"aquastar-fill-lid-standard-square-10-skimmer-cover-and-frame-clear","title":"AquaStar Clear Standard Skimmer Cover and Frame with 10 in. Fill-Lid","description":"\u003cp\u003eThe AquaStar SFL10100 is a clear 10 in. square Fill-Lid skimmer cover and frame. Instead of covering the skimmer with a visible plastic lid, you fill this one with your own deck material so the skimmer blends into the surrounding surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it disappears\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid accepts natural stone pavers up to 35 mm thick, and internal tabs hold that material firmly in place. The frame is adjustable, which matters on a real deck: few surfaces are perfectly flat, and the adjustment is what lets the finished lid sit level with the paving around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy non-metallic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStainless steel skimmer covers have to be bonded and can corrode over the years. This lid is built from an engineered polymer and carries no metal, so bonding is not required and rust is not a concern. The polymer is tested to the latest GV154 UV standard for color and structural stability under sun, and the screws supplied are 316 stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the standard square 10 in. size, listed as compatible with AquaStar skimmers and most standard skimmers, and the range is offered in several colors. This listing is the clear version.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634471481556,"sku":"SPG-251-1053","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e904a33a-1761-408d-85a3-d8a9c79b6db9.png?v=1788831695"},{"product_id":"skimmer-lid-with-frame","title":"AquaStar Skimmer Lid with Frame","description":"\u003cp\u003eAquaStar SKRT101 is a round skimmer lid supplied together with its frame, in white. It is listed to fit AquaStar skimmers and most standard skimmer openings, including Sta-Rite and Pentair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLid and frame in one part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer lids fail from the top down. Sun and foot traffic make the plastic brittle, and by the time the lid itself has cracked the frame it sits in is usually just as tired. Buying the two together means the new lid seats on a fresh frame and sits flush with the deck instead of rocking or dropping through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the round pattern. It is the common shape on residential decks, but if your skimmer is an older or unusual one it is worth measuring the opening before you order. The white finish matches the standard deck hardware most pools already carry.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634478198996,"sku":"API-251-1217","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8278870f-c8c3-4f7d-a0c6-55c091ceb860.jpg?v=1788832126"},{"product_id":"skimmer-lid-frame-sta-rite","title":"AquaStar 9-7\/8\" Round Skimmer Lid and Collar, Light Gray","description":"\u003cp\u003eThe AquaStar SKRT103 is a 9-7\/8 inch round skimmer lid supplied with its collar, finished in light gray. It fits AquaStar skimmers and most standard skimmers, including Sta-Rite and Pentair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy lids fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer lids sit flush in the deck and get walked on, dragged over and left in the sun for years. Sooner or later they go brittle and crack, usually right around the edge. The collar underneath takes the same abuse from below. Buying the two together means the whole opening is renewed rather than a new lid dropping into a broken frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGet the size right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer lids come in several diameters that look almost identical until you set them side by side. Measure the opening before ordering. This one is the 9-7\/8 inch round size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth doing early\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cracked deck lid is a genuine hazard. It gives way under a foot, and the opening beneath it is a hole in the deck. Replacing one is cheap and quick compared to what a fall costs.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634491109588,"sku":"API-251-1219","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_03828d96-3f5a-4c25-acd1-22c5c408c7b9.jpg?v=1788832599"},{"product_id":"black-flush-retrofit-eyeball","title":"AquaStar Black Flush Retrofit Eyeball","description":"\u003cp\u003eThe AquaStar JO102 is the black flush retrofit eyeball, the piece that drops into an existing return fitting and directs water back into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy flush\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA traditional directional eyeball stands out from the wall, which makes it something swimmers catch a foot or a hand on and something a pole knocks loose during cleaning. The flush design keeps the eyeball down in the fitting, so the wall stays close to smooth while the return still aims where you point it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor matching\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the black one, which suits dark plaster, dark tile and black wall fittings. AquaStar lists the same eyeball in white, light gray and dark gray, each with its own part number, so a whole pool can be matched from one family.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634492158164,"sku":"API-25-4117","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9389f5fd-1dd4-481d-9ea8-2f31320822d8.jpg?v=1788832698"},{"product_id":"aquathunder®-jet-barrel-with-therapeutic-spinner","title":"AquaStar AquaThunder Jet Barrel with Therapeutic Spinner, Light Gray","description":"\u003cp\u003eThe AquaStar ATBTS103 is the AquaThunder jet barrel with therapeutic spinner, in light gray. It is the visible fitting that threads into the jet body and shapes the water that comes out of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the spinner adds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA plain jet barrel puts a fixed stream into the same spot. The therapeutic spinner is a rotating internal, so the flow moves as it leaves the fitting. That is what turns a jet from a pressure point into a massage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild and fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe barrel is molded in ABS resin with a scalloped face, and AquaStar builds the thread to interchange with most popular brands. Compare it against the barrel you are replacing before ordering, because jet bodies are not universal. If you need the body behind the barrel, the gunite jet body assembly is a separate item.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634516668628,"sku":"API-85-0014","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/cl-industries-atbts103-aquathunder-jet-barrel-with-therapeutic-spinner.jpg?v=1788833695"},{"product_id":"4-adjustable-floor-return-fitting-with-water-stop","title":"AquaStar 4 in. Adjustable Floor Return Fitting with Water Stop","description":"\u003cp\u003eThe AquaStar 4DIV103 is a 4 in. adjustable floor return fitting with a water stop built in. It handles flow up to 80 GPM, and its diverter plate fits Pentair and Sta-Rite.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable and stopped\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAdjustable means the outlet can be aimed, so the returned water is directed across the pool rather than straight up out of the floor. That is how you get circulation into the corners where debris settles. The water stop is part of the same fitting, and it keeps the return line from draining back through the outlet every time the pump shuts down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA return, not a drain\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the one thing to be clear about before it goes in the ground. AquaStar states that it is not to be used as a suction outlet. A return pushes water into the pool. A suction outlet pulls water out, and it has to meet an entirely different set of safety requirements. Do not substitute one for the other.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634522566868,"sku":"API-25-1108","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_48233be8-1157-40a4-9e8b-b9cd41efec78.jpg?v=1788833764"},{"product_id":"light-gray-combo-niche-slip-1-5-ins-2-out-1-5-fpt-face","title":"AquaStar Light Niche \/ Return Fitting, Fits Inside 2\" Pipe, Light Gray","description":"\u003cp\u003eThe AquaStar 3703 is a combination light niche and return fitting in light gray. It is the fitting that lets a light socket land in a wall without the standard metal niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it plumbs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe fitting works with either common pipe size. It slips over 1-1\/2 in. pipe, and it slips inside 2 in. pipe, so it can be used on the plumbing already in the wall. The face carries a 1-1\/2 in. FPT thread, which is what a 1-1\/2 in. light socket screws into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe water stop\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA water stop is molded into the fitting rather than added as a separate collar. Its job is to interrupt the path water would otherwise take along the outside of the fitting through the shell, which is the leak that shows up years after a wall is poured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterials and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made from an engineered polymer, a UV resistant ABS. The light gray face is the other reason people specify it, since it reads as part of the wall rather than as the bright silver ring a standard niche leaves behind.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634605273300,"sku":"API-25-0292","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e3af1b9b-53ea-4822-9c04-d492308de9dc.png?v=1788835316"},{"product_id":"aquastar-large-2in-return-fitting-with-gasket-nut-blue-1020f104","title":"AquaStar Large 2\" Return Fitting with Gasket Nut and Eyeball Nut for Fiberglass or Steel, Blue","description":"\u003cp\u003eThe AquaStar 1020F104 is the large 2 inch return fitting for fiberglass and steel wall pools, supplied in blue with both the gasket nut and the eyeball nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the pieces do\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe gasket nut is what pulls the fitting up tight against the wall and stops water tracking behind it. The eyeball nut holds the directional eyeball once you have aimed the return where you want the flow to go. Getting both in one box saves the usual hunt for a nut that has gone brittle or cracked while the fitting itself is still fine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the size first. This is the large 2 inch body, and it is listed for fiberglass or steel pools, so hold it against the fitting you are removing to confirm the match rather than going by the port opening alone.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634623951060,"sku":"PSU-140986","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fb640890-6300-452d-9191-77092319da41.png?v=1788835523"},{"product_id":"skimmer-wier-plate-w-2-clips-3","title":"AquaStar Weir Plate Assembly for Standard and Vinyl\/Fiberglass Skimmers, Black","description":"\u003cp\u003eThe AquaStar SKWD102 is the weir plate assembly for standard and vinyl or fiberglass skimmers, molded in black and supplied with two weir clip locks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir is the hinged flap sitting in the skimmer throat. Water has to pass over it to get into the skimmer, which speeds up the top layer of the pool surface and is what actually drags floating debris toward the skimmer. When the pump shuts off, the weir drops and holds what has been collected inside the basket instead of letting it float back out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeirs go brittle in the sun, and the clip locks that hold them in place snap long before the plate itself wears out. A weir that has gone missing or no longer swings freely turns the skimmer into a plain hole in the wall, and skimming gets noticeably worse. This assembly ships with both clip locks so the whole hinge is renewed at once.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634626670804,"sku":"API-251-1225","price":23.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f237c60c-1465-4c13-b2dc-adb36d98be6a.jpg?v=1788835558"},{"product_id":"7-umbrella-sleeve-1","title":"AquaStar 7 1\/2\" White Umbrella Stand with Sleeve and Center Cap","description":"\u003cp\u003eThe AquaStar US101 is a 7-1\/2 in. white umbrella stand supplied with a decorative sleeve and a center cap. It is molded in UV resistant ABS and is listed for on floor, step or deck installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMore than an umbrella holder\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand takes umbrellas, volleyball poles and tiki torches, so one sleeve set into the shelf or the deck covers shade in the afternoon and a net at the weekend.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand is set into a hole formed in the gunite. Pool finish is then applied to the top of the stand so the fitting sits flush with the surface. The decorative sleeve and the center cap go on last, once the finish is done, which keeps the visible parts clean.\u003c\/p\u003e\u003cp\u003eThis listing is the white version.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634766622932,"sku":"API-25-1230","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_eb94cd43-231b-4f93-920e-351f07b52bd9.jpg?v=1788836777"},{"product_id":"7-umbrella-sleeve-2","title":"AquaStar 7-1\/2\" Dark Gray Umbrella Stand with Sleeve and Center Cap","description":"\u003cp\u003eThe AquaStar US105 is the 7-1\/2 in. umbrella stand in dark gray, supplied with a decorative sleeve and a center cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it holds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn umbrella for shade, a volleyball pole for a net, or a tiki torch. The sleeve stays in the deck or the shelf and whatever you put in it changes with the day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand goes into a hole formed in the gunite. Pool finish is applied to the top of the stand so the fitting sits in with the surrounding surface. The decorative sleeve and the center cap are installed after the finish has been applied, which is what keeps the visible parts looking clean.\u003c\/p\u003e\u003cp\u003eThis is the dark gray version; the same stand is also offered in white.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634767179988,"sku":"API-25-1233","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_03e495e8-2761-4324-b1ad-67feefb6a51f.jpg?v=1788836781"},{"product_id":"3-waterstop","title":"AquaStar 3\" Waterstop","description":"\u003cp\u003eAquaStar WS1201 is the 3 inch waterstop, made by AquaStar Pool Products. The supplier description also calls it a pipe sleeve; both names describe the same part and it is listed here under the name AquaStar gives it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA waterstop is used where plumbing has to pass through the shell of a pool. It is rough plumbing, set during construction rather than fitted to a finished pool, and it is sized to the pipe it carries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 3 inch size. AquaStar lists other sizes under their own part numbers, so confirm your pipe size against WS1201. The sleeve is supplied on its own, with no fittings.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634803519700,"sku":"API-56-6002","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_74c30841-ca88-4a0b-a376-b33af3f9b029.jpg?v=1788837697"},{"product_id":"large-wall-fitting-fits-inside-2-pipe","title":"AquaStar Large Wall Fitting, Fits Inside 2\" Pipe, White","description":"\u003cp\u003eThe AquaStar ES1022SI2001 is the large wall fitting in white, sized to fit inside 2 inch pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it sizes up\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWall fittings come in versions that go over the pipe and versions that go inside it, and the two are not interchangeable. This is the insider type for 2 inch pipe, in the large body. Check what the existing fitting does at the pipe before you order, because the outside appearance is a poor guide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine AquaStar\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the AquaStar Pool Products part, so the dimensions and the finish match what came out.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634939080916,"sku":"API-25-5504","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_621e2ff4-7ecc-4b31-8507-d32eaaf493ca.jpg?v=1788838993"},{"product_id":"return-extender-1-1-2-x-1-2","title":"AquaStar Return Extender with Eyeball and Nut, 1-1\/2\" x 1\/2\"","description":"\u003cp\u003eThe AquaStar ASD101 is a white return extender that comes with its eyeball and nut. It threads into any 1-1\/2 inch FPT return and adds half an inch of extension.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for remodels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a pool gets a new finish, the returns end up sitting below the new surface. Cutting the original fittings out is expensive and it means opening up work you just paid for. An extender solves it from the front: screw it into the fitting that is already in the wall, and the finished face comes back out to where it should be. Where the new finish is thicker, extenders can be stacked to get more than a single half inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterials and fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is molded in UV resistant ABS and made in the USA, and it is designed to finish flush with the surface rather than standing proud of it. The eyeball and nut are supplied with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA note on the orifice\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe listing names a 1 inch orifice, while the description also credits the eyeball with four orifice sizes, 1 inch, 3\/4 inch, 1\/2 inch and slotted. Both readings come from the manufacturer information, so check with us if a specific orifice size is what you are after.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48634942128340,"sku":"API-25-1015","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6c0e01e9-4c84-40be-9f5a-8c737654eae0.jpg?v=1788839033"},{"product_id":"lt-gray-skimmer-lid-rd-sta-rite-rt103-1","title":"Sta-Rite Round Skimmer Lid, Light Gray","description":"\u003cp\u003eRT103 is the round skimmer lid in light gray, listed for Sta-Rite skimmers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy lids fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe skimmer lid is the one piece of pool equipment that lives in full sun and gets stepped on. Over a few seasons the plastic goes chalky and brittle, then a footfall cracks it. Nothing about the skimmer below has to be wrong for the lid to need changing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer lids look alike and do not interchange freely. Measure the opening in your deck and check that it is round, and compare it against the lid you are replacing. A cracked or missing lid is an open hole at deck level, so it is worth getting the replacement on quickly.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48641952415956,"sku":"API-251-1002","price":25.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_39a16c71-5c1a-4bce-861f-d36cb5712a42.jpg?v=1788899947"},{"product_id":"18-square-wave-anti-entrapment-suction-outlet-cover-white","title":"AquaStar 18in Square Mud Frame Square Wave | WAV18WR101","description":"\u003cp\u003eAquaStar 18\" Square Mud Frame with Four (4) 9\" Square Wave Suction Outlet Covers with Vented Riser Rings (VGB Series) White | WAV18WR101\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48647819559124,"sku":"API-25-1943","price":372.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/6088_1_2012102272212_6ced0d48-f50c-45e8-abc8-d545db559b11.jpg?v=1789036128"},{"product_id":"32-channel-drain-w-3port-sump-4","title":"AquaStar 32CDFL103VGB LT GRAY 32\" CHANNEL DRAIN W\/3PORT SUMP | 32CDFL103","description":"\u003cp\u003e32CDFL103VGB LT GRAY 32\" CHANNEL DRAIN W\/3PORT SUMP\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48647967375572,"sku":"API-25-1302","price":166.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5889_2_20121213105915.jpg?v=1789036670"},{"product_id":"32-channel-drain-with-3-port-sump-vgb-series-light-gray","title":"AquaStar 32\" Channel Drain Anti-Entrapment (Anti-Vortex) Suctio | 32CDAV103","description":"\u003cp\u003eAquaStar 32\" Channel Drain Anti-Entrapment (Anti-Vortex) Suction Outlet Covers and Three-Port Manufactured Sumps Light Gray | 32CDAV103\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48647973634260,"sku":"API-25-1291","price":242.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5883_1_201235175359.jpg?v=1789036679"},{"product_id":"32-channel-drain-w-3port-sump-5","title":"AquaStar 32\" Channel Drain Anti-Entrapment | 32CDAV101","description":"\u003cp\u003eAquaStar 32\" Channel Drain Anti-Entrapment Anti-Vortex Suction Outlet Covers and Three-Port Manufactured Sumps | 32CDAV101\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48647973732564,"sku":"API-25-1292","price":234.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/3543_0_201642715590.jpg?v=1789036680"},{"product_id":"32-channel-drain-w-3port-sump-6","title":"AquaStar 32\" Channel Drain Anti-Entrapment (Anti-Vortex) Suctio | 32CDAV105","description":"\u003cp\u003eAquaStar 32\" Channel Drain Anti-Entrapment (Anti-Vortex) Suction Outlet Covers and Three-Port Manufactured Sumps Dark Gray | 32CDAV105\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48647973830868,"sku":"API-25-1337","price":242.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5924_1_20123518615.jpg?v=1789036682"},{"product_id":"12-ae-suct-lt-gr-w-mud-frame","title":"AquaStar 16\" Square Anti-Entrapment Suction Outlet Cover, Mud F | 1216103","description":"\u003cp\u003eAquaStar 16\" Square Anti-Entrapment Suction Outlet Cover, Mud Frame and Retro-Adapter Sub-Frame for 12\" Square 3\/4\" Deep Retrofits (VGB Series) Light Gray | 1216103\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48647979630804,"sku":"API-25-1651","price":177.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/139180_2_2012101216747.jpg?v=1789036787"},{"product_id":"32-channel-drain-w-flat-grate","title":"AquaStar 32in Channel Drain Flat Anti-Entrapment and Frames | 32CDFLFR102","description":"AquaStar 32\" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Covers and Frames | 32CDFLFR102\u003cbr\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48648512962772,"sku":"API-25-1328","price":148.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5915_1_20107915430.jpg?v=1789058713"},{"product_id":"32-channel-drain-w-av-cover","title":"AquaStar 32\" Channel Drain Anti-Entrapment (Anti-Vortex) Suctio | 32CDAVFR101","description":"\u003cp\u003eAquaStar 32\" Channel Drain Anti-Entrapment (Anti-Vortex) Suction Outlet Covers and Frames | 32CDAVFR101\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48648681980116,"sku":"API-25-1341","price":163.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5928_1_201082122848.jpg?v=1789058984"},{"product_id":"16x16-retrofit-for-12x12-anti-entrapment-drain-cover","title":"AquaStar 16in Square Anti-Entrapment Suction Cover | R1216101","description":"\u003cp\u003eAquaStar 16\" Square Anti-Entrapment Suction Outlet Cover and Retro-Adapter Sub-Frame for 12\" Square 1\" Deep Retrofits (VGB Series) White | R1216101\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48648692400340,"sku":"API-25-1657","price":140.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/6229_1_2012101516583.jpg?v=1789059002"},{"product_id":"4-brass-inserts-w-4-ss-screws","title":"AquaStar Four Brass Inserts with Stainless Steel Screws | BIK4","description":"\u003cp\u003eAquaStar Four Brass Inserts with Stainless Steel Screws for Suction Outlet Retrofits | BIK4\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48648886616276,"sku":"API-251-1146","price":69.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/3366_0_201641813274.jpg?v=1789059490"},{"product_id":"transitional-t-w-rb-3-12-cs","title":"AquaStar 4\"S×4\"S × 2-1\/2\"S×2-1\/2\"S Horizontal T with 4\" | BFB101","description":"\u003cp\u003eAquaStar 4\"?S×4\"?S × 2-1\/2\"?S×2-1\/2\"?S Horizontal T with 4\"?×3\"? Reducer Bushings | BFB101\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48648888090836,"sku":"API-25-1832","price":72.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/6399_1_2010726125358.jpg?v=1789059500"},{"product_id":"prostar-replacement-parts-a-frame-kit-hwn118","title":"AquaStar ProStar Replacement Parts A-Frame Kit Replaces AXV621D | HWN118","description":"\u003cp\u003eAquaStar ProStar Replacement Parts A-Frame Kit Replaces AXV621D. OEM part number HWN118.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48648993931476,"sku":"SPG-201-1012","price":37.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/135801_1_201071613184.jpg?v=1789059915"},{"product_id":"8-rd-sumpless-outlet-w-mfr","title":"AquaStar 8\" Round Hockey Puck Sumpless Suction Outlet with Mud | 8HP102","description":"\u003cp\u003eAquaStar 8\" Round Hockey Puck Sumpless Suction Outlet with Mud Frame (VGB Series) Black | 8HP102\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48649046720724,"sku":"API-251-1180","price":28.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5718_2_201272414144.jpg?v=1789060020"},{"product_id":"4-floor-return-fitting-1","title":"AquaStar 4\" Adjustable Floor Return Fitting with Water Stop Bla | 4DIV102","description":"\u003cp\u003eAquaStar 4\" Adjustable Floor Return Fitting with Water Stop Black | 4DIV102\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48649046950100,"sku":"API-25-1107","price":28.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5597_1_201129175055.jpg?v=1789060022"},{"product_id":"4-floor-return-fitting-2","title":"AquaStar 4\" Adjustable Floor Return Fitting | 4DIV105","description":"\u003cp\u003eAquaStar 4\" Adjustable Floor Return Fitting with Water Stop Dark Gray | 4DIV105\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48649047867604,"sku":"API-25-1109","price":22.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5619_1_201129174618.jpg?v=1789060023"},{"product_id":"8-rd-sumpless-outlet-w-mfr-1","title":"AquaStar 8\" Round Hockey Puck Sumpless Suction Outlet with Mud | 8HP101","description":"\u003cp\u003eAquaStar 8\" Round Hockey Puck Sumpless Suction Outlet with Mud Frame (VGB Series) White | 8HP101\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48649060483284,"sku":"API-251-1179","price":28.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5716_2_201272413594.jpg?v=1789060046"},{"product_id":"8-rd-sumpless-outlet-w-mfr-2","title":"AquaStar 8\" Round Hockey Puck Sumpless Suction Outlet with Mud | 8HP103","description":"\u003cp\u003eAquaStar 8\" Round Hockey Puck Sumpless Suction Outlet with Mud Frame (VGB Series) Light Gray | 8HP103\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48649064874196,"sku":"API-251-1181","price":28.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/5719_2_2012724141340.jpg?v=1789060048"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/aquastar-parts.oembed?page=3","provider":"Active Pool Supply","version":"1.0","type":"link"}