{"title":"CaliGlow Pro Nicheless LED Pool Light","description":"\u003cp\u003e\u003cstrong\u003eP-Series\u003c\/strong\u003e speaks Pentair IntelliBrite. It is the light for a pool run by IntelliTouch, EasyTouch or IntelliCenter, and the one body that seats in Pentair's GloBrite twist-lock niche, a MicroBrite's threaded fitting or a ColorVision bubbler. Most replacement buyers are shopping P.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJ-Series\u003c\/strong\u003e speaks Jandy WaterColors, for AquaLink and iAquaLink pools. It drops into the Jandy TruFit bubbler or any threaded 1-1\/2 inch fitting, which is where a HydroCool in Jandy mode sits today.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eH-Series\u003c\/strong\u003e speaks Hayward ColorLogic in the same Jandy body, for OmniLogic, ProLogic and Aqua Plus pools built with HydroCool fixtures in Hayward mode, and for new construction on Hayward automation. It is not a fit for the Hayward ColorLogic 320 or 160, which seal into bare pipe with a gasket the H-Series does not have.\u003c\/p\u003e","products":[{"product_id":"calimar-caliglow-pro-p-series-nicheless-led-color-changing-pool-spa-light-12v-50-39-cord","title":"CaliMar CaliGlow Pro P-Series Nicheless LED Pool and Spa Light, 12V, 50 ft Cord, CMAR2L20W50P","description":"\u003cp\u003eThe CaliGlow Pro P-Series is a 2 inch nicheless LED light for inground pools and spas. It puts out 900 lumens on 19 watts, which is the brightness of a much larger fixture from something that measures 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why cheap pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and a machined groove system turns the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFourteen programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSeven color shows, five fixed colors, and a color lock that freezes a show on any shade you like plus a return that recalls it. Selecting one takes no controller: cycle the switch off and on the number of times that matches the program. If you already run Pentair IntelliBrite lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100W or 300W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 50 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48607832309972,"sku":"PSU-204603","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CMAR2L20W50P.jpg?v=1788538019"},{"product_id":"calimar-caliglow-pro-p-series-nicheless-led-pool-and-spa-light-12v-100-ft-cord","title":"CaliMar CaliGlow Pro P-Series Nicheless LED Pool and Spa Light, 12V, 100 ft Cord, CMAR2L20W100P","description":"\u003cp\u003eThe CaliGlow Pro P-Series is a 2 inch nicheless LED light for inground pools and spas, running in P-Mode so it speaks Pentair IntelliBrite. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: the SAM, Party, Romance, Caribbean, American, California Sunset and Royal shows, then blue, green, red, white and magenta as fixed colors, plus a color lock that freezes a show on any shade and a return that recalls it. Turn the switch off and back on the number of times that matches the program you want, one for the SAM show through twelve for magenta. The count is the same whichever program is playing. Thirteen cycles locks the current color of a show; fourteen returns to the last locked color. If you already run Pentair IntelliBrite lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 100 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318190804,"sku":"PSU-204604","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4d8ed217-e653-4524-91f5-24213e9600e8.jpg?v=1789613586"},{"product_id":"calimar-caliglow-pro-p-series-nicheless-led-pool-and-spa-light-12v-150-ft-cord","title":"CaliMar CaliGlow Pro P-Series Nicheless LED Pool and Spa Light, 12V, 150 ft Cord, CMAR2L20W150P","description":"\u003cp\u003eThe CaliGlow Pro P-Series is a 2 inch nicheless LED light for inground pools and spas, running in P-Mode so it speaks Pentair IntelliBrite. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: the SAM, Party, Romance, Caribbean, American, California Sunset and Royal shows, then blue, green, red, white and magenta as fixed colors, plus a color lock that freezes a show on any shade and a return that recalls it. Turn the switch off and back on the number of times that matches the program you want, one for the SAM show through twelve for magenta. The count is the same whichever program is playing. Thirteen cycles locks the current color of a show; fourteen returns to the last locked color. If you already run Pentair IntelliBrite lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 150 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318354644,"sku":"PSU-204605","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ad4669f6-405a-4e53-b141-6e6611a3746e.jpg?v=1789613590"},{"product_id":"calimar-caliglow-pro-j-series-nicheless-led-pool-and-spa-light-12v-50-ft-cord","title":"CaliMar CaliGlow Pro J-Series Nicheless LED Pool and Spa Light, 12V, 50 ft Cord, CMAR2L20W50J","description":"\u003cp\u003eThe CaliGlow Pro J-Series is a 2 inch nicheless LED light for inground pools and spas, running in J-Mode so it speaks Jandy WaterColors. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: Alpine White, Sky Blue, Cobalt Blue, Caribbean Blue, Spring Green, Emerald Green, Emerald Rose, Magenta and Violet as solid colors, then the Slow Color Splash, Fast Color Splash, America the Beautiful, Fat Tuesday and Disco Tec shows. Turn the switch off and back on within 3 seconds to advance to the next program, and repeat until you reach the one you want. Left off for 7 seconds or more, the light comes back on in the program it was last showing, so a favorite stays put from one evening to the next. If you already run Jandy lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 50 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318387412,"sku":"PSU-204609","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9937b654-ae68-47c0-9ecd-dbedc51be395.jpg?v=1789613592"},{"product_id":"calimar-caliglow-pro-j-series-nicheless-led-pool-and-spa-light-12v-100-ft-cord","title":"CaliMar CaliGlow Pro J-Series Nicheless LED Pool and Spa Light, 12V, 100 ft Cord, CMAR2L20W100J","description":"\u003cp\u003eThe CaliGlow Pro J-Series is a 2 inch nicheless LED light for inground pools and spas, running in J-Mode so it speaks Jandy WaterColors. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: Alpine White, Sky Blue, Cobalt Blue, Caribbean Blue, Spring Green, Emerald Green, Emerald Rose, Magenta and Violet as solid colors, then the Slow Color Splash, Fast Color Splash, America the Beautiful, Fat Tuesday and Disco Tec shows. Turn the switch off and back on within 3 seconds to advance to the next program, and repeat until you reach the one you want. Left off for 7 seconds or more, the light comes back on in the program it was last showing, so a favorite stays put from one evening to the next. If you already run Jandy lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 100 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318551252,"sku":"PSU-204611","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ed0df9e3-d7cc-4aaf-a3fa-1e9c0cacedd6.jpg?v=1789613595"},{"product_id":"calimar-caliglow-pro-j-series-nicheless-led-pool-and-spa-light-12v-150-ft-cord","title":"CaliMar CaliGlow Pro J-Series Nicheless LED Pool and Spa Light, 12V, 150 ft Cord, CMAR2L20W150J","description":"\u003cp\u003eThe CaliGlow Pro J-Series is a 2 inch nicheless LED light for inground pools and spas, running in J-Mode so it speaks Jandy WaterColors. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: Alpine White, Sky Blue, Cobalt Blue, Caribbean Blue, Spring Green, Emerald Green, Emerald Rose, Magenta and Violet as solid colors, then the Slow Color Splash, Fast Color Splash, America the Beautiful, Fat Tuesday and Disco Tec shows. Turn the switch off and back on within 3 seconds to advance to the next program, and repeat until you reach the one you want. Left off for 7 seconds or more, the light comes back on in the program it was last showing, so a favorite stays put from one evening to the next. If you already run Jandy lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 150 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318584020,"sku":"PSU-204612","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7a7c5834-69bf-495d-a628-9551d5b8a684.jpg?v=1789613598"},{"product_id":"calimar-caliglow-pro-h-series-nicheless-led-pool-and-spa-light-12v-50-ft-cord","title":"CaliMar CaliGlow Pro H-Series Nicheless LED Pool and Spa Light, 12V, 50 ft Cord, CMAR2L20W50H","description":"\u003cp\u003eThe CaliGlow Pro H-Series is a 2 inch nicheless LED light for inground pools and spas, running in H-Mode so it speaks Hayward ColorLogic. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e27 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwenty seven programs: the Voodoo Lounge, Twilight, Tranquility, Gemstone, USA, Mardi Gras and Cool Cabaret shows, and twenty fixed colors from Deep Blue Sea and Royal Blue through Flamingo, Sangria, Gold, Mint and Teal to Pure White, Crisp White and Warm White. Turn the switch off and back on within 10 seconds to advance to the next program, and repeat until you reach the one you want. After the light has been off for more than a minute it comes on white for 15 seconds before returning to the last program; do not cycle the switch during those 15 seconds or the lights lose their synchronization. If you already run Hayward ColorLogic lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 50 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318747860,"sku":"PSU-204606","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_603af998-8342-486a-94a0-6b0807e00ac4.jpg?v=1789613601"},{"product_id":"calimar-caliglow-pro-h-series-nicheless-led-pool-and-spa-light-12v-100-ft-cord","title":"CaliMar CaliGlow Pro H-Series Nicheless LED Pool and Spa Light, 12V, 100 ft Cord, CMAR2L20W100H","description":"\u003cp\u003eThe CaliGlow Pro H-Series is a 2 inch nicheless LED light for inground pools and spas, running in H-Mode so it speaks Hayward ColorLogic. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e27 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwenty seven programs: the Voodoo Lounge, Twilight, Tranquility, Gemstone, USA, Mardi Gras and Cool Cabaret shows, and twenty fixed colors from Deep Blue Sea and Royal Blue through Flamingo, Sangria, Gold, Mint and Teal to Pure White, Crisp White and Warm White. Turn the switch off and back on within 10 seconds to advance to the next program, and repeat until you reach the one you want. After the light has been off for more than a minute it comes on white for 15 seconds before returning to the last program; do not cycle the switch during those 15 seconds or the lights lose their synchronization. If you already run Hayward ColorLogic lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 100 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318780628,"sku":"PSU-204607","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2149eb05-b615-4d60-8f61-71d80dc4a871.jpg?v=1789613604"},{"product_id":"calimar-caliglow-pro-h-series-nicheless-led-pool-and-spa-light-12v-150-ft-cord","title":"CaliMar CaliGlow Pro H-Series Nicheless LED Pool and Spa Light, 12V, 150 ft Cord, CMAR2L20W150H","description":"\u003cp\u003eThe CaliGlow Pro H-Series is a 2 inch nicheless LED light for inground pools and spas, running in H-Mode so it speaks Hayward ColorLogic. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e27 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwenty seven programs: the Voodoo Lounge, Twilight, Tranquility, Gemstone, USA, Mardi Gras and Cool Cabaret shows, and twenty fixed colors from Deep Blue Sea and Royal Blue through Flamingo, Sangria, Gold, Mint and Teal to Pure White, Crisp White and Warm White. Turn the switch off and back on within 10 seconds to advance to the next program, and repeat until you reach the one you want. After the light has been off for more than a minute it comes on white for 15 seconds before returning to the last program; do not cycle the switch during those 15 seconds or the lights lose their synchronization. If you already run Hayward ColorLogic lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 150 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318977236,"sku":"PSU-204608","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6e24abb8-0dac-4e2b-a4da-6c5c0f5e31b8.jpg?v=1789613606"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/caliglow-pro-nicheless-led-pool-light.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}