{"title":"CaliMar","description":null,"products":[{"product_id":"calimar-caliglow-pro-p-series-nicheless-led-color-changing-pool-spa-light-12v-50-39-cord","title":"CaliMar CaliGlow Pro P-Series Nicheless LED Pool and Spa Light, 12V, 50 ft Cord, CMAR2L20W50P","description":"\u003cp\u003eThe CaliGlow Pro P-Series is a 2 inch nicheless LED light for inground pools and spas. It puts out 900 lumens on 19 watts, which is the brightness of a much larger fixture from something that measures 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why cheap pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and a machined groove system turns the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFourteen programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSeven color shows, five fixed colors, and a color lock that freezes a show on any shade you like plus a return that recalls it. Selecting one takes no controller: cycle the switch off and on the number of times that matches the program. If you already run Pentair IntelliBrite lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100W or 300W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 50 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48607832309972,"sku":"PSU-204603","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CMAR2L20W50P.jpg?v=1788538019"},{"product_id":"calimar-variable-speed-pool-pump-2-threaded-ports-1hp","title":"1 HP Variable Speed 2 in. Threaded Ports CaliMar Pool Pump, 230V, CMARVSP1.0","description":"\u003cp\u003eThe CaliMar CMARVSP1.0 is a 1 HP variable speed pump built for inground pools, spas, water features and fountains. Thick walled body castings, engineered hydraulics and a heavy duty totally enclosed fan cooled motor are what let it run a full season on a pad that sees sun, rain and chlorine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy variable speed matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed pump moves water at one rate whether you are filtering overnight or vacuuming. This one runs anywhere from 450 to 3450 RPM, so filtration happens slowly and quietly for most of the day and full speed is reserved for cleaning and backwashing. Moving the same water more slowly uses far less power, which is why the pump carries a WEF rating of 7.5 and is listed under ENERGY STAR 2.0. That listing is also what most utility rebate programs are written against.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to stay serviceable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe permanent magnet motor produces less noise and vibration than the induction motors it replaces. Wetted components are molded from corrosion proof reinforced thermoplastic, the shaft is stainless steel and the mechanical seal uses American designed carbon to ceramic sealing faces. A large strainer basket sits under a clear engineered polymer lid that stays transparent instead of clouding, and the lid locks with a quarter turn, so checking the basket is a ten second job rather than a tool job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis model is specified at 230V single phase, 10A, so confirm the circuit at the pump pad is 230V. Suction and discharge are 2 in. threaded ports, the standard size on inground systems. The pump is self priming and carries a NEMA Type 3 environmental rating for outdoor installation.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48613743853780,"sku":"PSU-199914","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CMARVSP1.0.webp?v=1788473816"},{"product_id":"calimar-replacement-salt-cell-for-hayward-t-cell-15","title":"CaliMar Replacement Salt Cell for Hayward T-Cell-15, 2-Year Warranty, 40K Gallons, CMARCHA40-2Y","description":"\u003cp\u003eThe CaliMar CMARCHA40-2Y is a generic replacement for the Hayward T-Cell-15, built for Hayward Goldline AquaRite, AquaLogic and ProLogic salt systems. It is a lower cost alternative to the OEM cell and has been tested under rigorous conditions to make sure it performs like one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pools it suits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the right cell if your pool is larger than 25,000 gallons, if you are replacing a T-Cell-15, or if your Hayward system was built before 2009. Smaller pools are better served by the 25,000 and 15,000 gallon CaliMar cells, which replace the T-Cell-9 and T-Cell-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlug and play\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cell fits the existing plumbing and existing Hayward equipment with no additional installation work. A 15 ft cord gives plenty of reach to the power center. It is covered by a two year CaliMar warranty.\u003c\/p\u003e\u003cp\u003eCaliMar and the CMARCHA40-2Y are not manufactured, produced or marketed by Hayward, and CaliMar is not affiliated with Hayward Industries, Inc. Hayward model and system names are used for compatibility reference only.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48624832577748,"sku":"PSU-153534","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_aaf57784-72bc-4992-ac96-bfc28b83f99e.png?v=1788643272"},{"product_id":"califun-soft-sided-frame-above-ground-swimming-pool-package-10-x-18-rectangle-52-tall-187331","title":"CaliFun Soft Sided Frame Above Ground Swimming Pool Package, 10 ft x 18 ft Rectangle, 52 in. Tall, CF-1018 Kit","description":"\u003cp\u003eThe CaliFun CF-1018 is a soft sided frame above ground pool, a 10 ft by 18 ft rectangle with a 52 in. wall. A rigid frame carries the structure and a soft pool wall hangs inside it, which keeps assembly simple and avoids the steel wall panel of a traditional above ground pool.\u003c\/p\u003e\u003cp\u003eCaliFun is one of the newer lines in the CaliMar family of pool products. The design goal is a rugged, durable structure with as little complexity as possible, so the pool goes up quickly and stays square through the season.\u003c\/p\u003e\u003cp\u003eThis listing is the complete CF-1018 package. Contact us before ordering if you need the component list confirmed for your installation.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48624873504980,"sku":"CAL-187331","price":1962.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b6eae155-dce7-432d-8081-4404467e43d4.jpg?v=1788647938"},{"product_id":"calimar-replacement-salt-cell-for-r0503000-electrode-cmarcfs40-1y","title":"CaliMar Replacement Salt Cell Compatible with Zodiac Nature 2 Fusion R0503000, 40,000 Gallons, CMARCFS40-1Y","description":"\u003cp\u003eThe CaliMar CMARCFS40-1Y is an aftermarket replacement salt cell for the Zodiac Nature 2 Fusion system. It stands in for the R0503000 electrode, the 40,000 gallon model, and carries the same pool size rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNature 2 Fusion systems use more than one electrode size. Look for the part number on your existing cell; this replacement is for the R0503000 only. It is a CaliMar part, not a Zodiac branded one.\u003c\/p\u003e\u003cp\u003eThe UPC is 922001900410. It ships by parcel.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48624873930964,"sku":"PSU-190041","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_304fa4f1-4599-44d5-9c29-5c7b74309dac.png?v=1788647993"},{"product_id":"calimar-variable-speed-pool-pump-2-threaded-ports-3hp","title":"CaliMar Variable Speed Pool Pump, 2\" Threaded Ports, 3HP, CMARVSP3.0","description":"\u003cp\u003eThe CaliMar CMARVSP3.0 is a 3HP variable speed pump for inground pools, spas, water features and fountains, with 2 in. threaded ports and a permanent magnet motor. It is listed under the ENERGY STAR 2.0 pool pump specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMotor and hydraulics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe permanent magnet motor runs cooler and quieter than an induction motor and is totally enclosed and fan cooled, so the windings are protected from dust and damp on the pad. The diffuser and impeller are matched to move water at low speed with as little power and noise as possible, which is where a variable speed pump spends most of its life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWet end\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBody parts are thick walled, corrosion-proof reinforced thermoplastic. The shaft is stainless steel and the mechanical seal uses carbon to ceramic faces. The strainer basket is oversized, and the see-through lid comes off and locks back on with a quarter turn, so a basket check takes seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth ports are 2 in. threaded. The pump is self-priming, so start-up after a basket clean or a winter shutdown is straightforward.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48624881139924,"sku":"PSU-168195","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ebc9c8b9-ecd3-4523-93a3-639eb1f9541a.png?v=1788649280"},{"product_id":"calimar-replacement-cell-for-pentair-intellichlor-ic40-40k","title":"CaliMar Replacement Salt Cell Compatible with IntelliChlor IC40, 40K Gallons, CMARCIC40-1Y","description":"\u003cp\u003eThe CaliMar CMARCIC40-1Y is a replacement salt cell built to work in place of the Pentair IntelliChlor IC40. It is rated for pools up to 40,000 gallons and carries a 1 year warranty. CaliMar is not affiliated with Pentair; the IntelliChlor and IC40 names are used only to identify which system the cell fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the cell does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlow detection, salinity and water temperature sensors are built into the cell, so it reads its own conditions and reports them on the digital display. Chlorine output is adjustable, there is a super chlorination mode for shocking, and a cell failed indicator tells you when the plates are done rather than leaving you to guess from a green pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSelf cleaning\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cell reverses polarity on a schedule, which sheds calcium scale from the plates. That keeps output steady between inspections and cuts down on acid cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSalt level\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRun the pool at 3000 to 4000 PPM. Below that range output drops and the cell works harder for the same chlorine; above it the system may flag high salt.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48624881238228,"sku":"PSU-189320","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fee40c25-ef1d-4d59-a53b-110b757d0ed1.jpg?v=1788649292"},{"product_id":"calimar-replacement-salt-cell-for-sgs-wave-breeze-540-systems-and-cmp-powerclean-540-systems","title":"CaliMar Replacement Salt Cell for SGS Wave \u0026 Breeze 540 Systems and CMP Powerclean 540 Systems, 40K Gallons, CMARCPC40-2Y","description":"\u003cp\u003eThe CaliMar CMARCPC40-2Y is a replacement salt cell electrode for 540 series chlorine generators: the CMP Powerclean Salt Ultra 540 and Powerclean Salt Econ 540, the SGS Wave 540 and SGS Breeze 540, and the CaliMar Platinum CMARSSG40. It is rated for pools up to 40,000 gallons, uses 5 blades, and carries a 2 year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a compatible replacement for the SGS electrodes 1FIN-CEBRZ540 and 1FIN-CEWAVE40, the CMP electrode 52000-240-110, and the CaliMar electrode CMARCSG40-1. If your system is on that list, this cell fits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrode only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cell is supplied as the electrode. It installs in your existing clear housing. If the housing is cloudy or cracked, or the o-ring has flattened, both are available separately.\u003c\/p\u003e\u003cp\u003eThe CaliMar CMARCPC40-2Y is not manufactured, produced or marketed by CMP, and neither CaliMar nor this cell is affiliated with CMP. Model and system names are given for compatibility reference only.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48624930324692,"sku":"PSU-190443","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_eb47c121-7179-42c3-be99-1bc62b9934c3.jpg?v=1788655054"},{"product_id":"calimar-replacement-salt-cell-for-hayward","title":"CaliMar Replacement Salt Cell Compatible with Hayward T-Cell-15, 40K Gallons, CMARCHA40-1Y","description":"\u003cp\u003eThe CaliMar CMARCHA40-1Y is a generic replacement for the Hayward T-CELL-15, made for Hayward Goldline AquaRite, AquaLogic and ProLogic salt systems built before 2009. It is rated for pools up to 40,000 gallons and is offered as a lower cost alternative to the factory cell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it the right cell?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose the CMARCHA40-1Y if your Hayward system was built before 2009, your pool is larger than 25,000 gallons, and the cell you are replacing is a T-CELL-15 or an equivalent generic. Systems from that era accept either the OEM T-CELL-15 or a compatible cell like this one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTested output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCaliMar replacement cells are tested under demanding conditions before release so they deliver reliable chlorine output in service.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48624956801236,"sku":"PSU-170083","price":629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_616db57d-ccec-4f7b-9bea-6771b196e962.png?v=1788656021"},{"product_id":"calimar-salt-chlorinator-for-inground-pools-up-to-60-000-gallons","title":"CaliMar Salt Chlorinator System Complete, for Up to 60,000 Gallon Pools, CMARSHA60-3Y","description":"\u003cp\u003eThe CaliMar CMARSHA60-3Y is a complete salt chlorinator system for inground pools up to 60,000 gallons. It is the largest size in the CaliMar line, for pools well beyond what a standard 40,000 gallon system will keep up with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAdd pool salt to the water once. As water passes through the cell, the system converts the dissolved salt into chlorine, which sanitizes the pool and then reverts back to salt. You stop buying, hauling and storing chlorine, and the pool holds a steady level instead of the swings that come with manual dosing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA salt system should be rated above your actual pool volume, so the 60,000 gallon rating suits large inground pools and pools that run hot or carry heavy bather loads.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48624964763860,"sku":"PSU-185795","price":1019.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f86d7bcf-e386-403e-942d-584063e58fdc.jpg?v=1788656726"},{"product_id":"calimar-variable-speed-pool-pump-1-5hp-cmar15vs1-5","title":"CaliMar Variable Speed Pool Pump, 1.5 in. Threaded Ports, 1.5 HP, CMAR15VS1.5","description":"\u003cp\u003eThe CaliMar CMAR15VS1.5 is a 1.5 HP variable speed pool pump with 1.5 in. threaded ports. It is sized for medium-head pools, which is most residential systems, so it reaches payback faster than the larger and more expensive variable speed pumps that are often oversold for the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMotor and hydraulics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor is a permanent magnet, totally enclosed fan-cooled design. It runs quieter with less vibration than an induction motor and delivers the efficiency that earns the pump its ENERGY STAR 2.0 listing. Inside, a diffuser and high-efficiency impeller are matched to move the most water for the least power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to last on the pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wet end components are molded from corrosion-proof reinforced thermoplastic. The shaft is stainless steel and the mechanical seal uses carbon to ceramic sealing faces. The pump is self-priming, so start-up after a basket clean or a winter shutdown is quick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDay to day\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe see-through lid is an engineered polymer that stays clear, so a glance tells you whether the large strainer basket needs emptying. When it does, the lid comes off and locks back on with a quarter turn.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48624998940884,"sku":"PSU-175834","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_87e9ebe5-14da-4656-8650-20847487caff.png?v=1788661821"},{"product_id":"calimar-variable-speed-pool-pump-2-threaded-ports-2hp","title":"CaliMar Variable Speed Pool Pump 2 in. Threaded Ports 2HP, CMARVSP2.0","description":"\u003cp\u003eThe CaliMar CMARVSP2.0 is a 2 HP variable speed pump with 2 in. threaded ports, built for inground pools and equally at home on a spa, water feature or fountain. It combines a permanent magnet motor with efficient hydraulics in a corrosion proof body, and it is listed under the ENERGY STAR 2.0 pool pump specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMotor and hydraulics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe permanent magnet motor is the reason a variable speed pump runs so quietly and so cheaply at low speed. It is totally enclosed and fan cooled, which keeps it efficient and long lived. Behind it, a redesigned diffuser and high efficiency impeller move more water per watt while keeping noise down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to last on the pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBody parts are thick walled, reinforced thermoplastic that will not corrode. The shaft is stainless steel and the mechanical seal uses carbon to ceramic faces. The pump is self priming, so start up after a basket clean or a winter layup is quick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEveryday maintenance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clear lid lets you see the strainer basket without opening anything, and when it does need emptying the lid comes off with a quarter turn and locks back the same way. The basket is large, so those checks are less frequent to begin with.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48625006117076,"sku":"PSU-199915","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3eb7e5db-1fc7-4182-991a-be82ca750069.png?v=1788661980"},{"product_id":"calimar-replacement-cell-for-pentair-intellichlor-ic20-20k","title":"CaliMar Replacement Salt Cell Compatible with IntelliChlor IC20, 20K Gallons, CMARCIC20-1Y","description":"\u003cp\u003eThe CaliMar CMARCIC20-1Y is a replacement salt cell built to work with Pentair IntelliChlor IC20 systems, rated for pools up to 20,000 gallons and covered by a one year warranty. When the original IC20 cell has reached the end of its life, this is a lower cost way to get the chlorinator producing again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the cell does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuilt in sensors read flow, salinity and water temperature. The digital display and LED indicators show an accurate salinity level, and a cell failed indicator tells you when the plates are done. Chlorine output is adjustable, there is a super chlorination mode for a boost after heavy use or a storm, and a smart chlorinator program manages everyday output. The cell reverses polarity to clean itself, so scale build up and manual acid cleaning are kept to a minimum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWater chemistry\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep salt between 3000 and 4000 ppm for the cell to run as intended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CaliMar CMARCIC20-1Y is not manufactured, produced or marketed by Pentair, and neither CaliMar nor this cell is affiliated with Pentair Aquatic Systems. The IC20 model and system designations are used for compatibility reference only.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48625006215380,"sku":"PSU-189302","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_532b861a-470e-4bf1-a72d-94946beb2e00.jpg?v=1788662003"},{"product_id":"calimar-replacement-salt-cell-for-sgs-wave-breeze-320-systems-and-cmp-powerclean-320-systems","title":"CaliMar Replacement Salt Cell for SGS Wave \u0026 Breeze 320 Systems and CMP Powerclean 320 Systems, CMARCPC20-2Y","description":"\u003cp\u003eThe CaliMar CMARCPC20-2Y is a replacement salt cell for three related salt chlorine generators: the SGS Wave 320, the SGS Breeze 320 and the CMP Powerclean 320. It takes the place of the factory cell on those systems once the original has worn out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt cells lose output gradually. If the system is set high and chlorine is still falling short, with salt level and stabilizer in range and the plates already cleaned, the cell is the usual cause. Swapping in a fresh cell restores the chlorine production the system was sized for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the model name on your power supply. This cell is listed for the 320 size Wave, Breeze and Powerclean systems only.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48625020141780,"sku":"PSU-190442","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9fb3a6c5-808b-4951-b77b-e45d29ba513e.jpg?v=1788662251"},{"product_id":"calimar-replacement-hayward-t-cell-3-salt-cell-3-year-warranty","title":"CaliMar Replacement Salt Cell Compatible with Hayward T-CELL-3, 15,000 Gallons, CMARCHA15-2Y","description":"\u003cp\u003eThe CaliMar CMARCHA15-2Y is a replacement salt cell for the Hayward T-CELL-3. It is a generic cell, not an OEM part, made for Hayward Goldline AquaRite, AquaLogic and ProLogic salt systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cell is plug and play. It goes into the same place as the T-CELL-3 on existing AquaRite equipment, with no extra plumbing and no changes to the power center. The 15 foot cord gives enough reach for the usual pad layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is designed to chlorinate pools up to 15,000 gallons. Undersizing a cell means running it longer and wearing it out faster, so check your pool volume against that figure before ordering. Larger pools take a bigger cell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a generic cell\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCaliMar cells are tested under demanding conditions and sold as an economical alternative to OEM cells and to other generics. For an owner facing the cost of a factory cell, it is the middle path.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48625712365780,"sku":"PSU-151841","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_afce5d72-250b-45e0-b98f-2b4f45c2d6c8.png?v=1788689084"},{"product_id":"calimar-clear-housing-compatible-with-cmarcsg-electrodes-cmarsgh","title":"CaliMar Clear Housing for SGS Wave and Breeze and CMP PowerClean Systems, CMARSGH","description":"\u003cp\u003eThe CaliMar CMARSGH is a clear replacement housing for SGS Wave and Breeze systems and for CMP PowerClean systems. It is compatible with CaliMar CMARCSG electrodes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHousing only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe electrode is not included. That is the point of buying the housing on its own: when the body cracks, leaks or clouds over but the plates are still good, you replace the housing and carry the electrode across.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy clear\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA transparent housing lets you look at the plates during a routine check. Scale, discoloration and trapped debris are all visible without breaking the plumbing, which makes it easy to tell whether the cell needs cleaning.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48625716265172,"sku":"PSU-105115","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a713a221-5a9e-4f36-a54b-12133719ce91.png?v=1788689212"},{"product_id":"calimar-salt-chlorinator-for-inground-pools-up-to-40-000-gallons","title":"CaliMar Complete Salt Chlorinator System for Inground Pools up to 40,000 Gallons, CMARSHA40-3Y","description":"\u003cp\u003eThe CaliMar CMARSHA40-3Y is a complete salt chlorinator system for inground pools holding up to 40,000 gallons. Cell and control unit come together as one package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow salt chlorination works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt is dissolved in the pool water, and the cell converts it to chlorine as water passes through. The chlorine does its work and reverts to salt, so the salt is not consumed the way tablets are. What you get is steady sanitizer without hauling and dosing chlorine by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the system to the actual volume of your pool. This model covers pools up to 40,000 gallons. A chlorinator asked to serve more water than it is rated for runs at full output constantly and still falls behind, so if your pool is larger, choose the larger system.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48625724293332,"sku":"PSU-151836","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a357eff7-5ad9-48eb-b8a3-6d1e20827e2c.jpg?v=1788690122"},{"product_id":"calimar-replacement-salt-cell-for-cmarsha40-3y-up-40k-gal","title":"CaliMar Replacement Salt Cell for CMARSHA40-3Y, Up to 40,000 Gallon Pools, CMARCCF40-3Y","description":"\u003cp\u003eThis is the CaliMar CMARCCF40-3Y replacement salt cell for the CMARSHA40-3Y salt chlorine generator system, the model rated for pools up to 40,000 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen a cell needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA salt cell is a consumable. The plates wear over years of chlorine production, output falls, and no amount of cleaning or salt adjustment brings it back. Replacing the cell restores the system without touching the control box, which normally outlives several cells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine CaliMar\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCaliMar supplies saltwater chlorination products and above ground pools, and states its chlorination systems and replacement cells are proven under rigorous testing. The cell carries a three year limited warranty. Match the part number CMARCCF40-3Y to your CMARSHA40-3Y system before ordering.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48625799594196,"sku":"PSU-154909","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1ce9d84b-aa17-47cf-8030-e8cd3ea873d8.jpg?v=1788700308"},{"product_id":"calimar-salt-cell-replacement-for-autopilot-model-rc-35-22-ppc1","title":"CaliMar Replacement Salt Cell for AutoPilot Model RC-35\/22, SC-36, PPC1, 35K Gallons, CMARCAP35-2Y","description":"\u003cp\u003eThe CaliMar CMARCAP35-2Y is a replacement salt cell for AutoPilot equipment, covering the RC-35\/22, SC-36 and PPC1 cells. It is designed to chlorinate pools up to 35,000 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA direct swap\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CMARCAP series is built as a generic replacement for AutoPilot and Pool Pilot systems, including Soft Touch, Digital, Total Control, AG and Nano. It is a plug and play unit, so it fits existing AutoPilot equipment without extra parts and without cutting new plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy owners choose it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA salt cell is a wear item. The plates lose output over the years and eventually the system cannot hold chlorine no matter how the settings are adjusted. CaliMar cells are tested under demanding conditions and give a cost effective way back to full output when the original cell is finished.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48625840193748,"sku":"PSU-151849","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e9ee4772-6753-4ed9-8c95-1893ae4f20d3.png?v=1788701267"},{"product_id":"calimar-replacement-hayward-t-cell-9-salt-cell-2-year-warranty","title":"CaliMar Replacement Hayward T-Cell-9 Salt Cell, 2-Year Warranty, 25K Gallons, CMARCHA25-2Y","description":"\u003cp\u003eThe CaliMar CMARCHA25-2Y is a replacement salt cell built to take the place of the Hayward T-Cell-9. It is rated for pools up to 25,000 gallons and carries a two year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy owners buy a replacement cell\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt cells are a consumable. The plates lose output over time and eventually a system that used to hold chlorine no longer can, whatever the settings say. CaliMar positions its cells as a more economical alternative to the original manufacturer parts and other generics, and states that they are tested under rigorous conditions before sale.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease read: this is not a Hayward product\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCaliMar and the CMARCHA25-2Y are not manufactured, produced or marketed by Hayward, and neither CaliMar nor this cell is affiliated with Hayward Industries. The Hayward model and system names appear here only to identify which cell this one is designed to replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the cell to the one you are taking out rather than to your pool alone. The T-Cell-9 class is the 25,000 gallon size, and fitting a cell rated for a different volume changes how the system calculates output.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48626218336468,"sku":"PSU-151842","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_715825f6-7bb0-415f-a78d-30a051e08510.png?v=1788706400"},{"product_id":"calimar-replacement-salt-cell-for-cmarsha25-3y-up","title":"CaliMar Replacement Salt Cell for CMARSHA25-3Y, Up to 25,000 Gallon Pools, CMARCCF25-3Y","description":"\u003cp\u003eThe CaliMar CMARCCF25-3Y is the replacement cell for the CMARSHA25-3Y salt chlorine generator system, rated for pools up to 25,000 gallons. It carries a three year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the cell is the part that goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn any salt system the cell is the consumable. Its plates convert dissolved salt into chlorine, and those plates wear with every hour of run time. The control unit that drives them normally sees out several cells, which is why a chlorine output that has fallen off, with a clean cell and correct salt level, points at the cell rather than the whole system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the cell to the pool. This one is rated to 25,000 gallons. Running an undersized cell on a larger pool means longer run hours, less chlorine than the pool needs and a shorter cell life, so it is not a saving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe replacement cell on its own, for an installed CMARSHA25-3Y system. CaliMar states its chlorination systems and replacement cells are tested under rigorous conditions and backed by a three year limited warranty.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48626363695316,"sku":"PSU-154908","price":519.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_746d1844-ed88-4d7b-a411-dfcc9231b455.png?v=1788709305"},{"product_id":"calimar-salt-chlorinator-inground-25k-gals-cmarsha25-3y","title":"CaliMar Salt Chlorinator System Complete, for Up to 25,000 Gallon Pools, CMARSHA25-3Y","description":"\u003cp\u003eThe CaliMar CMARSHA25-3Y is a complete salt chlorinator system for inground pools of up to 25,000 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow salt chlorination works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt is dissolved in the pool water and the system converts it to chlorine as water passes through the cell. The chlorine sanitizes the pool, then reverts to salt, and the cycle repeats. The result is chlorinated water without carrying tablets or jugs to the pool every week.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis system is rated to 25,000 gallons. Matching the rating to your actual pool volume matters: a system asked to cover more water than it is rated for runs flat out to keep up, which shortens the life of the cell and still leaves you chasing chlorine in hot weather.\u003c\/p\u003e\u003cp\u003eIt is supplied as a complete system for inground pools.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48626487099604,"sku":"PSU-151835","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c78ee7dc-3539-43d7-88ac-f5e0e97e5e2b.jpg?v=1788710863"},{"product_id":"calimar-replacement-salt-cell-for-cmarsha15-3y-up-15k-gal","title":"CaliMar Replacement Cell for Salt Chlorine Generator, Up to 15,000 Gallon Pools, CMARCCF15-3Y","description":"\u003cp\u003eThis is the CaliMar replacement salt cell, part CMARCCF15-3Y, for the CMARSHA15-3Y salt chlorine generator system. It is rated for pools up to 15,000 gallons and carries a three year limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen a cell needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cell is the consumable part of any salt system. Its plates wear with hours of operation, and when they do the system stops producing chlorine at the rate it used to, even with the salt level and the settings correct. Replacing the cell restores output without touching the control box or the plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt cells are sized to pool volume. This one is the 15,000 gallon cell for the CMARSHA15-3Y system, so check both your system model and your pool volume before ordering. CaliMar builds saltwater chlorination products and above ground pools, and states that its systems and replacement cells are tested under rigorous conditions.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48627398508756,"sku":"PSU-154907","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a1df6141-429f-4c24-9d9d-bef00b1d48c2.jpg?v=1788723019"},{"product_id":"calimar-replacement-salt-cell-compatible-with-sgs-wave-breeze-760-systems-and-cmp-powerclean-760-systems","title":"CaliMar Replacement Salt Cell for SGS Wave and Breeze 760 and CMP Powerclean 760 Systems, 60K Gallons, CMARCPC60-2Y","description":"\u003cp\u003eThe CaliMar CMARCPC60-2Y is a replacement salt cell electrode rated to 60,000 gallons, built with a 7 blade plate pack. It is offered with a two year warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the replacement for the SGS cell electrode 1FIN-CEBRZ760, the CMP cell electrode 52000-260-110 and the CaliMar cell electrode CMARCSG60-1. The system compatibility supplied with the cell reads CMP Powerclean Salt Ultra 750, SGS Breeze 750 and CaliMar Platinum CMARSSG60, while the listing itself names the SGS Wave and Breeze 760 and CMP Powerclean 760 systems. Read your system label and your existing cell part number and match on those before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen a cell is done\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt cell plates wear out. Chlorine output falls off, the system starts reporting low salt or low output even after the water has been tested and corrected, and no amount of acid cleaning brings it back. That is the point where the electrode has to be replaced rather than serviced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrand note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis cell is made by CaliMar. It is not manufactured, produced or marketed by CMP, and neither CaliMar nor this cell is affiliated with CMP. The system and model names above are included so you can confirm fitment.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48627744407764,"sku":"PSU-190444","price":659.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1f57cbcc-ceb2-4f1e-ae31-a2b60aad28c4.jpg?v=1788727633"},{"product_id":"calimar-califlow-variable-speed-pool-pump-1-hp-230v","title":"CaliMar CaliFlow Variable Speed Pool Pump, 1 HP, 230V, CMARCFVSP2010","description":"\u003cp\u003eThe CaliMar CaliFlow is a variable speed inground pool pump rated 1 HP at 230V, part number CMARCFVSP2010. Thick-walled body parts, a heavy duty TEFC motor and engineered hydraulics make it a fit for pools, spas, water features and fountains.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere the savings come from\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe permanent magnet motor turns anywhere between 450 and 3450 RPM. Filtration at low speed draws a fraction of the power full speed does, which is what earns the 7.5 WEF rating and the listing under the ENERGY STAR 2.0 specifications. The same design runs quieter and with less vibration than an induction motor, so the pad is easier to live next to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to last on the pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBody components are molded from corrosion-proof reinforced thermoplastic. The motor is totally enclosed and fan-cooled with a NEMA Type 3 environmental rating, the shaft is stainless steel, and the American designed mechanical seal runs carbon against ceramic. A large strainer basket sits under a see-through lid that stays clear and locks with a quarter turn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlumbing it in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe threaded port size is 2 inches, and reducer fittings are included so the pump adapts to 1.5 in or 2.0 in threaded plumbing. Removable feet let you take up a height difference between the new pump and the old mounting, so a retrofit does not have to mean recutting pipe.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48627849101524,"sku":"PSU-204617","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cc1ac83e-bc75-40e2-9a90-3fb2473f46a7.png?v=1788728257"},{"product_id":"calimar-replacement-salt-cell-for-cmarsha60-3y-up-60k-gal","title":"CaliMar Replacement Salt Cell for Salt Chlorine Generator, Up to 60,000 Gallon Pools, CMARCCF60-3Y","description":"\u003cp\u003eThis is the CaliMar CMARCCF60-3Y replacement salt cell, made for the CMARSHA60-3Y salt chlorine generator system. It is the 60,000 gallon size, the largest in the CaliMar range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy cells get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA salt cell is a consumable. The plates inside it produce chlorine from the salt in the water and they wear out with use, so output falls away even though the control unit is still working perfectly. When chlorine will not hold and the salt level and settings both check out, the cell is usually the reason.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout CaliMar\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCaliMar supplies saltwater chlorination products and above ground pools. Its chlorination systems and replacement cells are tested under rigorous conditions, and this cell carries a three year limited warranty.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48627874234580,"sku":"PSU-185796","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a3750d70-2331-48c5-a874-b414d87d730d.jpg?v=1788729475"},{"product_id":"calimar-variable-speed-pool-pump-2-threaded-ports-1-5hp","title":"CaliMar Variable Speed Pool Pump, 2 inch Threaded Ports, 1.5HP, CMARVSP1.5","description":"\u003cp\u003eThe CaliMar CMARVSP1.5 is a 1.5HP variable speed pool pump with 2 inch threaded ports. It is a complete pump, supplied ready to plumb in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVariable speed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA variable speed pump is not locked to one speed. It can turn slowly for routine filtering, where a long quiet run moves the water without a single fixed speed doing all the work, and step up when a job needs the flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the plumbing at the equipment pad. This pump has 2 inch threaded ports, and the connections at the pad need to match or be adapted to suit.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48627874496724,"sku":"PSU-168194","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8e0390f8-fa3d-4231-964b-4c129751de88.png?v=1788729484"},{"product_id":"calimar-salt-cell-replacement-for-autopilot-cmarcap42-2y","title":"CaliMar Replacement Salt Cell Compatible with AutoPilot Model RC-42, SC-48, PPC3, 50K Gallons, CMARCAP42-2Y","description":"\u003cp\u003eThe CaliMar CMARCAP42-2Y is a replacement salt cell built to fit AutoPilot chlorine generator systems, specifically the RC-42, SC-48 and PPC3. It carries a 50,000 gallon rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen a cell needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt cells wear out. The plates lose their coating over years of service, output falls, and the pool runs short on chlorine even with the controller turned up. Once cleaning the cell no longer brings output back, the cell itself is the part to change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you keep\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOnly the cell is replaced here. The AutoPilot power center, the plumbing and the wiring all stay in place, which makes this a straightforward swap rather than a system change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the model first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your system is an RC-42, SC-48 or PPC3 before ordering, and confirm your pool is within the 50,000 gallon rating. Matching the part number CMARCAP42-2Y is the surest way to get the right capacity.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48627957989588,"sku":"PSU-151850","price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ef609a68-6ff0-485d-b861-1c443c956b37.png?v=1788730962"},{"product_id":"calimar-replacement-electrode-for-esc-ecomatic-models-re-esc","title":"CaliMar Replacement Salt Cell Compatible with Ecomatic ESC24, ESC36, ESC48 Systems, CMARCEC54-1Y","description":"\u003cp\u003eThe CaliMar CMARCEC54-1Y is a replacement salt cell electrode for Ecomatic ESC systems. It is built to take the place of Ecomatic cell models ESC24, ESC36 and ESC48, listed by Ecomatic as model M0657USA, and the same electrode is used in the newer ESC7000, ESC8000 and ESC9000 systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutput and protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThirteen titanium blades generate chlorine for pools up to 54,000 gallons. A safety sensor shuts the unit down when salt flow is insufficient, and an auto delay holds production off at startup while the pump primes, so the electrode is not energized before water and salt are moving through it. Like the original Ecomatic electrodes, it cycles off half of the time when set to 50 percent output, which spreads the working life of the blades.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe electrode only. The cell housing and the cord are sold separately, and replacing all three together is the usual approach, since a tired cord or a cracked housing will undo the benefit of a new cell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCaliMar is not affiliated with Ecomatic or with Davey Water, and this cell is not made or sold by them. The Ecomatic model numbers above are given only to identify which systems the electrode fits.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48628778172628,"sku":"PSU-151848","price":759.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7c330c16-d577-4fa3-9655-350fd7432ac5.png?v=1788750500"},{"product_id":"calimar-replacement-salt-cell-for-cfcp15-electrode-cmarcce20-1y","title":"CaliMar Replacement Salt Cell Electrode for CompuPool CFCP15, 4-Blade, Up to 20K Gallons, CMARCCE20-1Y","description":"\u003cp\u003eThe CaliMar CMARCCE20-1Y is a replacement salt cell electrode for CompuPool CFCP15 chlorination systems. It is the 4-blade electrode, rated for pools up to 20,000 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA generic replacement, fully compatible\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a generic replacement for the electrode rather than a CompuPool branded one, and it is compatible with CompuPool parts and system components. The controller does not behave differently: it keeps its default salt level of 3500 parts per million, which can be adjusted, along with its high and low salt fault lights, no flow sensor, water temperature sensor and winter mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe electrode only. The unit housing, unions and O-rings are not included, so the existing ones are carried over. A new cord is recommended whenever the cell or electrode is replaced, and the waterproof connectors on these systems make that a simple job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the electrode to the system, not to the pool. This one is the CFCP15 electrode. Larger CompuPool systems take a different blade count, so check the model on the power supply before ordering.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48628832665812,"sku":"PSU-151844","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_20223121-2a09-421b-87f3-76180f7519a6.jpg?v=1788753643"},{"product_id":"calimar-replacement-salt-cell-for-r0502800-electrode-cmarcfs12-1y","title":"CaliMar Replacement Salt Cell for Zodiac Nature2 Fusion Soft 700 Model R0502800, 12K Gallons, CMARCFS12-1Y","description":"\u003cp\u003eThe CaliMar CMARCFS12-1Y is an aftermarket replacement salt cell for the Zodiac Nature2 Fusion Soft 700 system, model R0502800, rated for pools up to 12,000 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is built\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cell uses titanium plate with a 1.0mm platinum coating, made as a solid plate cathode and anode. That is the working surface where salt is converted to chlorine, and it is the part that wears out over years of service. When a salt system runs but the pool will not hold a residual, and the water chemistry and salt level check out, the electrode is usually the answer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an aftermarket cell. CaliMar is not manufactured, produced or marketed by Nature2, and neither CaliMar nor this cell is affiliated with Zodiac or Fluidra. The system and model numbers above are listed so you can confirm which cell you need.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48628850950356,"sku":"PSU-190040","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_37839fad-e757-4c9f-b9aa-0d324daa2dac.png?v=1788755316"},{"product_id":"calimar-straight-pipe-bypass-dummy-cell-for-hayward-salt-cells-cmar-cell-pipe","title":"CaliMar Straight Pipe Bypass Dummy Cell for Hayward Salt Cells, CMAR-CELL-PIPE","description":"\u003cp\u003eThe CaliMar CMAR-CELL-PIPE is a straight pipe bypass dummy cell made to take the place of a Hayward style salt cell in the plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA plain pass through with the same fittings as the cell it replaces. There are no plates inside and it does nothing to the water. Its only job is to keep the pipe run complete so the pump can circulate normally while the real cell is somewhere else.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it earns its keep\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt cells are commonly pulled for winter storage, for acid cleaning, or while a replacement is on order. Rather than leaving a gap in the line, the dummy cell goes in and the system runs. Remember that no chlorine is being produced while it is fitted, so sanitizer has to come from somewhere else during that time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrand note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a CaliMar product. CaliMar is not affiliated with Hayward Industries, Inc., and the Hayward references above describe what the part fits, nothing more.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48634533282004,"sku":"PSU-154802","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_59619ae4-44de-4d08-b22f-cc73a180d5fa.png?v=1788833984"},{"product_id":"calimar-basket-fb2010b","title":"CaliMar Basket for CMAR15VS1.5 and CMARVSP3.0 Variable Speed Pumps, FB2010-B","description":"\u003cp\u003eThe CaliMar FB2010-B is the replacement strainer basket for the CaliMar CMAR15VS1.5 and CMARVSP3.0 variable speed pumps. It is the genuine CaliMar part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the basket does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything the skimmer misses arrives at the pump. The strainer basket catches leaves, twigs and grit before they reach the impeller, which is the part that cannot easily be cleared once it is packed. A basket doing its job is the cheapest protection a pump has.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBaskets go brittle after a few seasons of sun and chlorine. Once the plastic cracks or a section of the mesh breaks out, debris passes straight through and you lose that protection. Fit matters as much as condition: the basket has to seat properly in the pump body, because a basket sitting proud leaves a gap at the rim for debris to slip past.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48635041972436,"sku":"PSU-184195","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_03274231-4774-47b7-ba1c-84212f0eb28f.png?v=1788840456"},{"product_id":"calimar-replacement-cell-for-pentair-intellichlor-ic60-60k","title":"CaliMar Replacement Salt Cell Compatible with IntelliChlor IC60P, 60K Gallons, CMARCIC60-1Y","description":"\u003cp\u003eThe CaliMar CMARCIC60-1Y is a replacement salt cell compatible with IntelliChlor IC60P systems, rated for pools up to 60,000 gallons. It is the direct swap for a cell that has stopped producing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is inside\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cell carries its own flow detector and salinity and temperature sensors, so the system reads real conditions rather than guessing. Output is adjustable, a super chlorination mode is there for heavy use, and a smart chlorinator program manages the routine. A digital display with LED indicators reports salinity and flags a failed cell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSelf cleaning\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReverse polarity operation flips the current on a cycle so scale releases from the plates instead of building into a crust. Ideal salt level for the cell is 3000 to 4000 PPM, and holding that range does more for cell life than anything else you can control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCaliMar manufactures this cell. It is not manufactured, produced or marketed by Pentair, and neither CaliMar nor this cell is affiliated with Pentair Aquatic Systems. The IntelliChlor model and system names are given for identification only, so you can see which cell it replaces.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48645963055316,"sku":"PSU-189321","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f703aa56-7e94-4b84-89e4-1eeb6ad15184.jpg?v=1788975261"},{"product_id":"calimar-salt-chlorinator-for-inground-pools-up-to-15-000-gallons","title":"CaliMar Salt Chlorinator System for Inground Pools up to 15,000 Gallons, CMARSHA15-3Y","description":"\u003cp\u003eThe CaliMar CMARSHA15-3Y is a salt chlorinator system for inground pools holding up to 15,000 gallons. It is sold as a complete system rather than as a replacement cell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow a salt pool works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA chlorinator does not replace chlorine, it makes it. Salt dissolved in the pool passes through the cell, the cell converts it to sanitizer, and the sanitizer reverts to salt after it does its job. The result is steadier chemistry than hand dosing and no weekly trip to carry jugs to the equipment pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing matters most\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis unit is rated to 15,000 gallons. Sizing to your actual pool volume is the single decision that determines how long the cell lasts, because a chlorinator pushed past its rating runs longer every day to keep up and wears out sooner. If your pool is close to the limit, the next size up is the better buy.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48646284443860,"sku":"PSU-151834","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bdbc8901-2797-46d3-972b-d65ff51884b5.jpg?v=1788987764"},{"product_id":"calimar-motor-drive-fb2030-md","title":"CaliMar Motor Drive FB2030-MD","description":"\u003cp\u003eThis is the CaliMar motor drive, part number FB2030-MD, supplied as the genuine replacement unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder by part number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDrives are matched to the equipment they were fitted to, and the part number is the only reliable way to confirm you have the right one. Find the label on the drive you are taking off and check that it reads FB2030-MD before you order. If the label is illegible or the number does not match, get in touch rather than guessing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the drive alone. Replacing it means working on wiring that carries line voltage, so isolate the circuit first and have a qualified tech handle the swap and the test run.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48646289359060,"sku":"PSU-184216","price":297.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/184216_0_20269463143.jpg?v=1788987781"},{"product_id":"calimar-replacement-motor-230v-3hp-fb2030-m","title":"CaliMar Replacement Motor, 230V 3HP, FB2030-M","description":"\u003cp\u003eThis is the CaliMar FB2030-M replacement pool pump motor, rated 3 HP on 230 volts. It is the genuine CaliMar part, supplied as the motor alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor only. Shaft seals, gaskets and wet end components are separate parts, and it is worth ordering a fresh shaft seal with the motor. A seal that has already run its life against the old motor is the most common reason a fresh motor install has to come apart again a month later.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the part number on the motor you are pulling out to FB2030-M. Horsepower and voltage on their own do not tell you the frame, flange and shaft are the same, and those are what determine whether the motor bolts up.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48646299812052,"sku":"PSU-184217","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/184217_0_2026658448.jpg?v=1788987877"},{"product_id":"calimar-replacement-salt-cell-electrode-for-compupool-cpsc36","title":"CaliMar Repl Cell for CompuPool CPSC36 Up 40K Gal. CMARCCE40-3Y | CMARCCE40-1Y","description":"The CaliMar® CMARCCE40-3Y salt cell electrode is for use with the CompuPool CPSC36 chlorination system. It's a generic replacement for the CPSC36 electrode, completely compatible with CompuPool parts and system components. The unit housing, unions and O-rings are not included with the electrode, and we always recommend adding a new cord (see Purchase Suggestions above for these accessories) when replacing the cell or electrode.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48647618625748,"sku":"PSU-151846","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CMARCCE40_1af.jpg?v=1789669187"},{"product_id":"calimar-replacement-cell-for-cmarssg20-5-20k-gal-cmarcsg20-1","title":"CaliMar CMARSSG20-5 Replacement Cell for 20,000 Gal. | CMARCSG20-1","description":"CaliMar Platinum Series Replacement Salt Cell Electrode for CMARSSG20-5 up to 20K Gallons\u003cbr\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48647655522516,"sku":"PSU-164179","price":348.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/53915_0_2017515182432.jpg?v=1789035202"},{"product_id":"calimar-salt-cell-replacement-for-autopilot-cmarcap52-2y","title":"CaliMar Salt Cell Replacement AutoPilot Model RC-52 SC-60 PPC4 | CMARCAP52-2Y","description":"CaliMar is an cost effective way to get a premium quality replacement cell for your AutoPilot system. The CMARCAP series is a direct generic replacement for AutoPilot and all Pool Pilot systems such as Soft Touch, Digital, Total control, AG and Nano. CaliMar replacement cells are proven to provide reliable performance after being tested under rigorous conditions. These are plug and play units and are meant to perfectly fit all existing AutoPilot equipment without any additional equipment or plumbing required.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48647670431956,"sku":"PSU-151851","price":619.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/52571_0_2017217112350.jpg?v=1789035248"},{"product_id":"calimar-calinav360-cordless-inground-robotic-pool-cleaner","title":"CaliMar CaliNav360 Cordless Inground Robotic Pool Cleaner | CMARNAV360-5Y","description":"\u003cp\u003eCaliMar® CaliNav360 Cordless Inground Robotic Pool Cleaner, CMARNAV360-5Y\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48647683113172,"sku":"PSU-190457","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/190457_0_202482010590.jpg?v=1789665671"},{"product_id":"calimar-replacement-salt-cell-electrode-for-compupool-cpsc24","title":"CaliMar Repl Cell for CompuPool CPSC24 Up 26K Gal. CMARCCE30-3Y | CMARCCE30-1Y","description":"The CaliMar® CMARCCE30-3Y salt cell electrode is for use with the CompuPool CPSC24 chlorination system. It's a generic replacement for the CPSC24 electrode, completely compatible with CompuPool parts and system components. The unit housing, unions and O-rings are not included with the electrode, and we always recommend adding a new cord (see Purchase Suggestions above for these accessories) when replacing the cell or electrode.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48647777485012,"sku":"PSU-151845","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CMARCCE30_1af.jpg?v=1789666172"},{"product_id":"calimar-strainer-cover-kit-fb2010-sck","title":"CaliMar Strainer Cover Kit FB2010SCK | FB2010-SCK","description":"\u003cp\u003eCaliMar Strainer Cover Kit For use with: CaliMar CMAR15VS1.5 and CMARVSP3.0 variable speed pump\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48649450488020,"sku":"PSU-184193","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/55171_0_2022721135515.jpg?v=1789053882"},{"product_id":"calimar-cover-o-ring-fb2010-co","title":"CaliMar Cover O Ring FB2010CO | FB2010-CO","description":"\u003cp\u003eCaliMar® Cover O Ring FB2010-CO For use with: CaliMar® CMAR15VS1.5 and CMARVSP3.0 variable speed pump\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48649714598100,"sku":"PSU-184194","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/55172_0_2024313112345.jpg?v=1789060133"},{"product_id":"calimar-caliglow-pro-p-series-nicheless-led-pool-and-spa-light-12v-100-ft-cord","title":"CaliMar CaliGlow Pro P-Series Nicheless LED Pool and Spa Light, 12V, 100 ft Cord, CMAR2L20W100P","description":"\u003cp\u003eThe CaliGlow Pro P-Series is a 2 inch nicheless LED light for inground pools and spas, running in P-Mode so it speaks Pentair IntelliBrite. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: the SAM, Party, Romance, Caribbean, American, California Sunset and Royal shows, then blue, green, red, white and magenta as fixed colors, plus a color lock that freezes a show on any shade and a return that recalls it. Turn the switch off and back on the number of times that matches the program you want, one for the SAM show through twelve for magenta. The count is the same whichever program is playing. Thirteen cycles locks the current color of a show; fourteen returns to the last locked color. If you already run Pentair IntelliBrite lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 100 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318190804,"sku":"PSU-204604","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4d8ed217-e653-4524-91f5-24213e9600e8.jpg?v=1789613586"},{"product_id":"calimar-caliglow-pro-p-series-nicheless-led-pool-and-spa-light-12v-150-ft-cord","title":"CaliMar CaliGlow Pro P-Series Nicheless LED Pool and Spa Light, 12V, 150 ft Cord, CMAR2L20W150P","description":"\u003cp\u003eThe CaliGlow Pro P-Series is a 2 inch nicheless LED light for inground pools and spas, running in P-Mode so it speaks Pentair IntelliBrite. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: the SAM, Party, Romance, Caribbean, American, California Sunset and Royal shows, then blue, green, red, white and magenta as fixed colors, plus a color lock that freezes a show on any shade and a return that recalls it. Turn the switch off and back on the number of times that matches the program you want, one for the SAM show through twelve for magenta. The count is the same whichever program is playing. Thirteen cycles locks the current color of a show; fourteen returns to the last locked color. If you already run Pentair IntelliBrite lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 150 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318354644,"sku":"PSU-204605","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ad4669f6-405a-4e53-b141-6e6611a3746e.jpg?v=1789613590"},{"product_id":"calimar-caliglow-pro-j-series-nicheless-led-pool-and-spa-light-12v-50-ft-cord","title":"CaliMar CaliGlow Pro J-Series Nicheless LED Pool and Spa Light, 12V, 50 ft Cord, CMAR2L20W50J","description":"\u003cp\u003eThe CaliGlow Pro J-Series is a 2 inch nicheless LED light for inground pools and spas, running in J-Mode so it speaks Jandy WaterColors. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: Alpine White, Sky Blue, Cobalt Blue, Caribbean Blue, Spring Green, Emerald Green, Emerald Rose, Magenta and Violet as solid colors, then the Slow Color Splash, Fast Color Splash, America the Beautiful, Fat Tuesday and Disco Tec shows. Turn the switch off and back on within 3 seconds to advance to the next program, and repeat until you reach the one you want. Left off for 7 seconds or more, the light comes back on in the program it was last showing, so a favorite stays put from one evening to the next. If you already run Jandy lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 50 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318387412,"sku":"PSU-204609","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9937b654-ae68-47c0-9ecd-dbedc51be395.jpg?v=1789613592"},{"product_id":"calimar-caliglow-pro-j-series-nicheless-led-pool-and-spa-light-12v-100-ft-cord","title":"CaliMar CaliGlow Pro J-Series Nicheless LED Pool and Spa Light, 12V, 100 ft Cord, CMAR2L20W100J","description":"\u003cp\u003eThe CaliGlow Pro J-Series is a 2 inch nicheless LED light for inground pools and spas, running in J-Mode so it speaks Jandy WaterColors. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: Alpine White, Sky Blue, Cobalt Blue, Caribbean Blue, Spring Green, Emerald Green, Emerald Rose, Magenta and Violet as solid colors, then the Slow Color Splash, Fast Color Splash, America the Beautiful, Fat Tuesday and Disco Tec shows. Turn the switch off and back on within 3 seconds to advance to the next program, and repeat until you reach the one you want. Left off for 7 seconds or more, the light comes back on in the program it was last showing, so a favorite stays put from one evening to the next. If you already run Jandy lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 100 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318551252,"sku":"PSU-204611","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ed0df9e3-d7cc-4aaf-a3fa-1e9c0cacedd6.jpg?v=1789613595"},{"product_id":"calimar-caliglow-pro-j-series-nicheless-led-pool-and-spa-light-12v-150-ft-cord","title":"CaliMar CaliGlow Pro J-Series Nicheless LED Pool and Spa Light, 12V, 150 ft Cord, CMAR2L20W150J","description":"\u003cp\u003eThe CaliGlow Pro J-Series is a 2 inch nicheless LED light for inground pools and spas, running in J-Mode so it speaks Jandy WaterColors. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e14 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFourteen programs: Alpine White, Sky Blue, Cobalt Blue, Caribbean Blue, Spring Green, Emerald Green, Emerald Rose, Magenta and Violet as solid colors, then the Slow Color Splash, Fast Color Splash, America the Beautiful, Fat Tuesday and Disco Tec shows. Turn the switch off and back on within 3 seconds to advance to the next program, and repeat until you reach the one you want. Left off for 7 seconds or more, the light comes back on in the program it was last showing, so a favorite stays put from one evening to the next. If you already run Jandy lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 150 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318584020,"sku":"PSU-204612","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7a7c5834-69bf-495d-a628-9551d5b8a684.jpg?v=1789613598"},{"product_id":"calimar-caliglow-pro-h-series-nicheless-led-pool-and-spa-light-12v-50-ft-cord","title":"CaliMar CaliGlow Pro H-Series Nicheless LED Pool and Spa Light, 12V, 50 ft Cord, CMAR2L20W50H","description":"\u003cp\u003eThe CaliGlow Pro H-Series is a 2 inch nicheless LED light for inground pools and spas, running in H-Mode so it speaks Hayward ColorLogic. It puts out 900 lumens on 19 watts, the brightness of a much larger fixture from a body 5.48 inches long and 2.2 inches across the face, and it installs into standard 1-1\/2 inch or 2 inch Schedule 40 PVC rather than needing a traditional niche.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cooling is the reason it lasts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLEDs dim as they get hot, which is why sealed pool lights fade years before they fail. The core of this one is solid marine grade stainless steel, and machined grooves turn the fixture into a chimney: as it runs, cooler water is drawn from the bottom of the housing up across the heatsink. That passive circulation holds LED junction temperatures up to 40 percent below a sealed polymer housing, and the light still delivers over 90 percent of its original output at 30,000 hours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e27 programs from the wall switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwenty seven programs: the Voodoo Lounge, Twilight, Tranquility, Gemstone, USA, Mardi Gras and Cool Cabaret shows, and twenty fixed colors from Deep Blue Sea and Royal Blue through Flamingo, Sangria, Gold, Mint and Teal to Pure White, Crisp White and Warm White. Turn the switch off and back on within 10 seconds to advance to the next program, and repeat until you reach the one you want. After the light has been off for more than a minute it comes on white for 15 seconds before returning to the last program; do not cycle the switch during those 15 seconds or the lights lose their synchronization. If you already run Hayward ColorLogic lights on the same switch, these synchronize with them, so a mixed pool comes up in one color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a low voltage fixture and it needs a listed Class 2 transformer, 100 W or 300 W, stepping 120 VAC down to 12 to 14 VAC, on a GFCI protected circuit. With that transformer and the CaliGlow Pro 2 inch wall fitting the system is non metallic, so it needs no bonding or grounding under the current NEC. Installation is electrician work. The lens has to sit at least 4 inches below the water surface, and the plumbing needs 7 inches of vertical clearance between the top thread of the wall fitting and the bottom reducer.\u003c\/p\u003e\u003cp\u003eIn the box: the light on a 50 foot cord, an installation tool, a plaster cover and O-ring lube. Backed by a 3 year limited warranty from CaliMar.\u003c\/p\u003e","brand":"CaliMar","offers":[{"title":"Default Title","offer_id":48686318747860,"sku":"PSU-204606","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_603af998-8342-486a-94a0-6b0807e00ac4.jpg?v=1789613601"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/collections\/FullColorDark.png?v=1788765744","url":"https:\/\/www.activepoolsupply.com\/collections\/calimar.oembed?page=2","provider":"Active Pool Supply","version":"1.0","type":"link"}