{"title":"Century Equipment","description":"\u003cp\u003eCentury equipment at Active Pool Supply, genuine OEM and quality aftermarket.\u003c\/p\u003e","products":[{"product_id":"b2854-1-5hp-115-230v-ur-56y","title":"Century 1-1\/2 HP 3450 RPM 56Y Frame Square Flange Pool Pump Motor, 115\/230V","description":"\u003cp\u003eThe Century B2854V1 is a single speed 1-1\/2 HP, 3450 RPM pool pump motor in the 56Y square flange frame, wired for 115 or 230 volts. It is the motor used on the Pentair WhisperFlo, Challenger and Pinnacle pumps and on the Sta-Rite Max-E-Pro, and it replaces the older Century stock numbers B854 and B2854V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1.5 HP output (1.1 kW), 1.1 service factor, 16.0\/8.0 A at 115\/230 V, 60 Hz, single phase, continuous duty. The enclosure is drip proof, the motor is thermally protected with Class F insulation, and it is UL Recognized and CSA certified. Electrically it is a permanent split capacitor design with across the line starting, two poles, counterclockwise rotation at the pump end and ball bearings at both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOverall length 12.95 in., frame length 8.50 in. The shaft is 1\/2 threaded, 0.625 in. in diameter with a 0.91 in. extension, on a rolled steel frame. A new shaft seal is normal practice when changing a motor; the seal and gasket kits for WhisperFlo and Challenger are listed with the related parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot be shipped to California. Century builds six CEC compliant replacements in the V-Green EVO line, EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225, which also cut running cost through variable speed operation.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624546939092,"sku":"MGT-60-2989","price":350.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6bef0f35-281b-4ff9-8db1-069457b250e0.jpg?v=1788643204"},{"product_id":"century-b2855-replacement-motor","title":"Century 56Y Frame ODP Square Flange Pool \u0026 Spa Pump Motor 2HP 230V","description":"\u003cp\u003eThe Century B2855 is a 2 HP, 230 V single speed replacement motor on the 56Y square flange, the fit for Pentair Challenger, WhisperFlo, SuperFlo and Pinnacle pumps and for the Jandy Stealth SHPF and SHPM series. It is an open drip proof motor rated for continuous duty at a 50 C ambient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSingle phase, 60 Hz, 3450 rpm, service factor 1.1 with 10.0 A at service factor, 1.5 kW output, insulation class B, thermally protected. The design is permanent split capacitor and switchless, so there is no centrifugal start switch to stick or burn. Bearings are sealed ball at both ends, the shaft is stainless steel with a 1\/2 in. thread, and rotation is counterclockwise from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e13.46 in. overall length with a 9.00 in. frame, 0.625 in. shaft diameter and 0.91 in. shaft extension. Mounting is horizontal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot ship to a California address. For a California install, Century offers V-Green EVO variable speed models EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225 that meet the CEC standard.\u003c\/p\u003e\u003cp\u003ePlan on a new shaft seal with any motor swap. Seal kits for the Challenger, WhisperFlo, SuperFlo, Pinnacle and Jandy SHPF and SHPM pumps are sold separately.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624872947924,"sku":"MGT-60-2985","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b9fc6cb4-d273-4baa-ac09-483b9496d38b.png?v=1788647869"},{"product_id":"pump-motor-56j-up-rated-1-hp-115-230v","title":"Century 1 HP Pump Motor, 230\/115 Volt, 3450 RPM, Round Flange, 56J Frame, ODP","description":"\u003cp\u003eThe Century UST1102, also sold under the A.O. Smith name, is a 1 HP up rated replacement motor for the Hayward Super Pump, Super II and Max-Flo II. It is a 56J round flange motor with a 7\/16 in. threaded shaft, wired for 230 or 115 volts at 3450 rpm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1 HP output with a 1.10 service factor, 7.5 A at 230 V or 15.0 A at 115 V, single phase, 60 Hz, single speed. The enclosure is open drip proof with automatic thermal protection, a 50 C ambient rating and class B insulation. Starting is capacitor start, capacitor run, across the line, with a sealed switch design. Rotation is counterclockwise from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft is 303 stainless steel, 0.625 in. in diameter with a 2.56 in. extension and a 304 bearing at the shaft end. Ball bearings at both ends, a rolled steel frame, 13.53 in. overall and 7.75 in. frame length. A new shaft seal is standard practice when swapping the motor; the Super Pump seal kit and Super II rebuild kit are listed separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe UST1102 is not California Title 20 compliant and cannot be shipped to California. Century's CEC compliant pool motors are the V-Green EVO variable speed models EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624884285652,"sku":"AOS-60-5240","price":296.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cbaa5746-d9bf-4bb6-be8a-b2aa433093e9.jpg?v=1788649602"},{"product_id":"1-65thp-vgreen-evo-sq-flange-var-speed-motor","title":"Century VGreen Evo Variable Speed 1.65 THP Square Flange Pool Pump Motor, 230\/115 V, 48Y Frame","description":"\u003cp\u003eThe Century VGreen Evo EVQ165 is a 1.65 total horsepower variable speed motor in a 48Y square flange frame, made to bolt onto an existing pump in place of its single or two speed motor. Nothing else changes: the wet end stays, the plumbing stays, and the motor carries its own controller and user interface, so there is no drive box to mount or wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy variable speed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed motor runs flat out whenever it runs, moving more water than the pool needs and paying for it in electricity. A variable speed motor turns over the same water at a lower rpm for longer, which uses a fraction of the power, runs noticeably quieter and keeps the motor cooler, which in turn extends its life. Federal DOE rules and California Title 20 now require this class of motor on most replacements, and the EVQ165 is compliant with both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgramming\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single button on the motor steps through pre programmed schedules across the 600 to 3450 rpm range. Voltage is detected automatically on 230 or 115 V, and freeze protection is built in. If the pad has automation, the motor works with Pentair EasyTouch, IntelliTouch and IntelliConnect, Hayward OmniLogic, ProLogic, OmniPL and EcoStar, and Jandy iQPump 1.0, AquaLink TCX, iAquaLink 3.1 and AquaLink RS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSquare flange, 48Y frame, threaded 0.625 in. shaft with a 1\/2-20 thread, TEFC enclosure. It replaces the motor on Pentair WhisperFlo, Max-E-Pro, SuperFlo and SuperMax, Hayward Super Pump and MaxFlo, and Jandy FloPro and PlusHP pumps. A C face version and 1.30 and 2.25 THP ratings are available in the same family. Replace the shaft seal at the same time.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624917840084,"sku":"MGT-60-4051","price":638.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/MGT-60-4051.jpg?v=1788653263"},{"product_id":"motor-full-rated-two-speed-2-0-hp-1-3-sf-230v-b2984","title":"Century Full-Rated Two-Speed Pool Pump Motor, 2.0 HP 1.3 SF 230V (B2984)","description":"\u003cp\u003eThe Century B2984 is a full rated, two speed square flange motor for pool pumps: 2.0 HP with a 1.3 service factor at 230V, switching between 3450 rpm and 1725 rpm. It is the replacement motor for Pentair Challenger and WhisperFlo, Hayward TriStar and Jandy PlusHP PHPF and PHPM pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh speed handles vacuuming, heating and heavy circulation at 11.0 amps. Low speed turns the pool over at 1725 rpm on 1.8 amps, quietly and for a fraction of the energy. Both windings are energy efficient designs: permanent split capacitor on low speed, capacitor start and capacitor run on high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eY56Y frame, open drip proof enclosure rated for 50 °C ambient, class F insulation and built in thermal protection. The 303 stainless steel shaft is 0.625 in. in diameter with 1\/2 in. threads and rides on sealed ball bearings at both ends. Rotation is counterclockwise from the pump end. Overall length is 14.40 in. with a 10.00 in. frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant. Century makes six compliant VGreen Evo variable speed motors, EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225, for installations in California.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624918069460,"sku":"MGT-60-2984","price":692.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9ba61956-3881-4828-845c-a065c9cafc49.jpg?v=1788653308"},{"product_id":"century-pro-hsq165-square-flange-pool-and-spa-pump-motor-1-65-thp-3450-rpm-115-230-v-48y-threaded-shaft","title":"Century 1.65 HP Square Flange Pool and Spa Pump Motor, 3450 RPM 48Y, Threaded Shaft","description":"\u003cp\u003eThe Century Centurion Pro HSQ165 is a single speed replacement motor for square flange pool and spa pumps. It is rated 1.65 total horsepower at 3450 RPM with a 1.0 service factor, on a 48Y frame with a threaded 303 stainless steel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor is single phase, 60 Hz, and runs on either 115 V or 230 V through an on board voltage change device, drawing 18.8 A or 9.4 A. It is a capacitor start, induction run design with automatic thermal protection, class F insulation and an open drip proof enclosure rated for 50 degree C ambient. UL 1081 design, UL recognized and CSA listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for the pump end\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSealed 203 bearings at both ends, with triple seal protection on the pump end bearing where water is most likely to reach. The terminal board and wiring compartment are open and accessible, and the shaft has a 7\/16 in. wrench flat so you can hold it while threading the impeller on or off. Overall length is 14.12 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia buyers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe HSQ165 is not California Title 20 compliant and cannot be shipped to California. Century makes CEC compliant V-Green EVO variable speed motors, including the square flange EVQ130, EVQ165 and EVQ225, for that market.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624919904468,"sku":"AOS-60-2723","price":350.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_176bbc02-ad68-4056-a432-27736021de8a.png?v=1788653450"},{"product_id":"motor-full-rated-two-speed-1-5-hp-1-47-sf-230v-b2983","title":"Century Full-Rated Two-Speed Motor, 1.5 HP 1.47 SF 230V (B2983)","description":"\u003cp\u003eThe Century B2983 is a full rated two speed pool pump motor: 1.5 HP with a 1.47 service factor on high, running 3450 rpm on high and 1725 rpm on low from a 230V single phase 60 Hz supply. It is listed as a replacement motor for the Hayward TriStar SP3200 and SP3200EE and for Pentair SuperFlo pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, one motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed runs everyday filtration at 1.6 A while high speed delivers 10.0 A worth of flow for vacuuming, spa jets or backwashing. Both windings are energy efficient. Electrically it is PSC on low speed and capacitor start, capacitor run on high, with two and four pole operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOpen drip proof rolled steel frame in the Y56Y size, sealed ball bearings at both ends, class F insulation with thermal protection and a 50 C ambient rating for continuous duty. The 1\/2 in. threaded shaft is 303 stainless steel, 0.625 in. in diameter with a 0.91 in. extension. Overall length is 13.90 in. with a 9.50 in. frame. Rotation is counterclockwise viewed from the pump end. UL recognized and CSA listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor does not meet California Title 20 and cannot be sold, shipped or installed in California. Century offers six CEC compliant V-Green EVO models, EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225, for pools in that state.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624922853588,"sku":"MGT-60-2983","price":588.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_15dbcba8-1825-45eb-9bf3-bdabe6e0271f.jpg?v=1788653693"},{"product_id":"1hp-pool-motor-2-speed-energy-effiecient-full-rate-230v","title":"Century 1 HP Pool Motor, 2 Speed, Energy Efficient Full Rate, 230V","description":"\u003cp\u003eThe Century B2982 is a two speed, full rated 1 HP pool and spa pump motor for 230 V service, built on the Y56Y frame with a threaded shaft. It is the replacement motor for Pentair Challenger, SuperFlo and WhisperFlo pumps that run two speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, one motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh speed is 3450 rpm for vacuuming, running a heater or clearing the pool after a storm. Low speed is 1725 rpm for everyday turnover, where the motor draws a fraction of the current (1.4 A against 7.4 A at service factor). Nameplate output is 1.0 HP on high with a 1.65 service factor, 0.75 kW, 60 Hz single phase. The electrical design is PSC on low speed and cap start, cap run on high, started across the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSealed ball bearings at both ends, a 303 stainless steel shaft with a 1\/2 in. thread and 0.625 in. diameter, and a rolled steel open drip proof frame. It is thermally protected, Class F insulated, rated for continuous duty at 50 C ambient, UL recognized and CSA certified. Overall length is 13.40 in. with a 9.00 in. frame; rotation is counterclockwise from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot be sold or installed in California. Century's V-Green EVO variable speed motors (EVC130, EVC165, EVC225, EVQ130, EVQ165, EVQ225) meet the CEC standard and are the route for California pools.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624928620756,"sku":"MGT-60-2982","price":474.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_45905ebe-934b-46db-b99e-d209a9f02fad.jpg?v=1788654893"},{"product_id":"centry-b2853v1-1hp-115-230v-ur-p56y-odp-sqfl-motor","title":"Century 1 HP Square Flange Pool Pump Motor, 1 Phase, 60 Hz, 230\/115 V, 3450 RPM, 56Y Frame","description":"\u003cp\u003eThe Century B2853V1 is a single speed 1 HP square flange pool pump motor, dual voltage at 230 or 115 V, turning 3450 rpm on the P56Y frame with a threaded shaft. It is the current replacement for the A.O. Smith B283 and B2853, and it fits the pumps those motors came on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJandy PlusHP PHPM and PHPF pumps from 2006 onward, Jandy Stealth SHPF and SHPM from 2008 onward, Pentair Challenger, WhisperFlo and SuperFlo, and the Sta-Rite Super Max. Match the square flange, the 56Y frame and the threaded shaft to the motor coming off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate and construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1.0 HP, 0.75 kW, 1.25 service factor, 6.5 A at 230 V and 13.0 A at 115 V under service factor load. It is a switchless permanent split capacitor motor started across the line, with sealed ball bearings at both ends, a stainless steel shaft (0.625 in. diameter, 1\/2 in. thread, 0.910 in. extension) and a rolled steel drip proof frame. Thermally protected, Class F insulation, continuous duty at 50 C ambient, UL recognized and CSA certified. Overall length is 12.44 in. with an 8.00 in. frame, counterclockwise rotation from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot be sold or installed in California. Century's V-Green EVO variable speed motors (EVC130, EVC165, EVC225, EVQ130, EVQ165, EVQ225) are the CEC compliant alternatives.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624928948436,"sku":"MGT-60-2987","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d99346e6-233a-4e9f-b1a3-c751893cd225.jpg?v=1788654930"},{"product_id":"threaded-fr-2hp-2sp-230v","title":"Century Threaded Shaft 2 HP 2 Speed 230V Full Rate Motor B2979","description":"\u003cp\u003eThe Century B2979 is a two speed, 2 HP full rate replacement motor with a 56J round flange and a threaded shaft. It runs on 230V single phase and drops in on the two speed versions of the Hayward Super Pump, Super II SP3000 series, Northstar and Max Flow, the Jacuzzi Magnum, and Jandy HHP and HHPU pumps. It crosses to Hayward motor SP-1620-Z2-MC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh speed is 3450 rpm and low speed is 1725 rpm. High speed is switchless, and low speed is selected through a microswitch on the motor. Nameplate current is 10.0 A on high and 2.1 A on low at a 1.2 service factor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSealed ball bearings at both ends, a rolled steel frame, drip proof enclosure, class F insulation and thermal protection. The shaft is 7\/16 in. threaded 303 stainless steel, 0.625 in. in diameter with a 2.604 in. extension. Overall length is 13.55 in. and the frame is 8.25 in. long. The motor is UL recognized and CSA listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia buyers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot be sold into California. Century offers V-Green EVO variable speed motors, models EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225, that meet the CEC standard.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624937664724,"sku":"MGT-60-2979","price":624.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4332bb05-7180-462b-aa88-eb9826bb1b06.png?v=1788655702"},{"product_id":"motor-1-5hp-115-230v-48y-frame-ss","title":"Century BN35V1 Motor, 1.5 HP, 115\/230V, 48Y Frame (SS)","description":"\u003cp\u003eThe Century BN35V1, previously sold as BN35SS, is the 1.5 HP thru bolt motor found on a large share of above ground pool and spa pumps: Hayward Power-Flo LX and Power-Flo II, Pentair Dynamo, and Waterway Hi-Flo and Hi-Flo II side discharge pumps among them. Four thru bolts on a 5.146 in. circle hold it to the wet end, and the stainless steel 3\/8 in. threaded shaft takes the impeller directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCapacitor start, induction run, two pole, 3450 rpm, with a service factor of 1. It runs on 115 or 230 volts at 60 Hz, drawing 16.0 or 8.0 amps. Conduit entries are at 12 and 3 o'clock. The motor is thermally protected, class B insulated, UL recognized and CSA listed, and built to the UL 1081 design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMechanical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e48Y frame with a 48\/56 rigid base, rolled steel drip proof enclosure, sealed ball bearings at both the drive and opposite drive ends, counterclockwise rotation from the pump end. The shaft is 0.500 in. in diameter with a 2.375 in. extension and 3-1\/2 in. shaft height; overall length is 12.08 in. and the frame is 7.50 in. long. Rated for continuous duty at 40 degrees C ambient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot ship to California. Match the frame (48Y), horsepower and thru bolt mounting to your old motor's nameplate, and replace the shaft seal when you fit it.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624939303124,"sku":"MGT-60-0035","price":295.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c7810293-dc55-4752-a7c7-0d4aef015990.png?v=1788655927"},{"product_id":"2-25thp-vgreen-evo-sq-flange-var-speed-motor","title":"Century VGreen Evo Variable Speed 2.25 THP Square Flange Pool Pump Motor, 230\/115 V, 48Y Frame","description":"\u003cp\u003eThe Century EVQ225 VGreen Evo is a 2.25 total horsepower variable speed replacement motor in a 48Y square flange, made to turn an existing single speed pump into a variable speed one without changing the wet end, the plumbing or the wiring. It runs on 230 or 115 V single phase and detects the supply voltage on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy variable speed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed motor runs flat out whenever it runs, moving far more water than filtration needs. The VGreen Evo can turn anywhere from 600 to 3450 rpm, so it can circulate at a low, quiet speed for most of the day and step up only for a heater, a cleaner or a spa. Lower speeds draw far less power, run cooler and put less wear on the seal and bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgramming and automation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor carries its own single button interface with a set of pre-programmed variable speed schedules, so it can be set up on the pad with no controller. It also works with Pentair EasyTouch, IntelliTouch and IntelliConnect, Hayward OmniLogic, ProLogic, OmniPL and EcoStar, and Jandy iQPump 1.0, AquaLink TCX, iAquaLink 3.1 and AquaLink RS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury lists it as a replacement for the Pentair WhisperFlo, Max-E-Pro, SuperFlo and SuperMax, the Hayward Super Pump and MaxFlo, and the Jandy FloPro and PlusHP. It is a totally enclosed fan cooled motor with Class F insulation, a 50 °C ambient rating, automatic thermal protection and freeze protection. The shaft is 0.625 in. with a 1\/2-20 thread and the frame is 8.68 in. long in rolled steel. Maximum current is 13.5 A at 230 V and 17.4 A at 115 V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe EVQ225 conforms to the California Energy Commission Title 20 rules for replacement pool pump motors and can be shipped to and installed in California. A C-face version is available for pumps that use a 56J frame.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624957358292,"sku":"MGT-60-4052","price":672.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/MGT-60-4052_1a.png?v=1788656093"},{"product_id":"energy-efficient-pump-motor-full-rated-2-hp-230v","title":"Century Energy Efficient Pump Motor, Full Rated, 2 HP, 230V","description":"\u003cp\u003eThe Century ST1202 is a 2 HP, full rated, energy efficient pool pump motor for 230V service, with a 1.20 service factor. It is the replacement motor for Hayward Super Pump and Super II pumps, the SP1600, SP1600X, SP2600 and SP2600X series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFull rated, 2600 series\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFull rated means the 2 HP on the nameplate is the continuous rating, with the 1.20 service factor on top of it. Match the motor to a full rated 2 HP impeller and diffuser so the pump runs where it was designed to. The 2 HP full rate impeller and diffuser kit for the Super II is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCentury and A.O. Smith\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury is the A.O. Smith pool and spa motor brand, so you will see the ST1202 under either name. They are the same motor.\u003c\/p\u003e\u003cp\u003eThis motor is not for sale in California and cannot be shipped there.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624996352212,"sku":"AOS-60-5066","price":519.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8de1eaed-8d71-40ca-895c-59ec71cb880b.jpg?v=1788661589"},{"product_id":"energy-efficient-motor-full-rated-1-hp-115-208-qc1102","title":"Century Energy Efficient Motor Full Rated 1 HP, 115\/208 (QC1102)","description":"\u003cp\u003eThe Century QC1102 is a full rated 1 HP, two-compartment pool and filter motor: 3450 RPM, 115\/208-230 V, 48Y frame, square flange, threaded shaft. It is the replacement motor for Sta-Rite Dura-Glas II and Max-E-Glas II pumps, models P4R, P4RA, P4E and P4EA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the old motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFull rated means the nameplate 1 HP is real, with the service factor on top. If the motor coming off is a full rated 1 HP with a square flange and threaded shaft, this is the like for like swap. The dual voltage windings run on 115 V or 208-230 V single phase, set by the connection on the motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe QC1102 is not compliant with California Title 20, Section 1605.3(g)6, the energy efficiency rule for pool pumps and replacement motors. It cannot be sold or installed in California and we do not ship it there. Century's compliant V-Green EVO variable speed motors, EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225, are the alternative for California pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Century\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury, a Regal brand, builds NEMA 48 and 56 frame motors for in-ground and above ground pools, spas, pool cleaners and jetted tubs.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625001431252,"sku":"AOS-60-5216","price":391.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_36eb1ba0-5d17-4195-8796-38d9e870ce7f.jpg?v=1788661899"},{"product_id":"threaded-fr-2hp-230v","title":"Century Threaded Full Rate 2HP 230V Pool Pump Motor","description":"\u003cp\u003eThe Century B130 is a full rate 2 HP pool pump replacement motor in a 56J frame with a threaded shaft, wired for 230V and carrying a 1.2 service factor. It is the direct replacement for a worn out motor of the same frame, horsepower and voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCentury, formerly A.O. Smith\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury is a Regal brand and is the same motor line pool techs knew under the A.O. Smith name. It covers NEMA 48 and 56 frame motors for in-ground pools, above ground pools, spas, cleaners and jetted tubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot for California\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe B130 is not for sale or installation in the state of California. For California pools, Century's CEC compliant V-Green EVO variable speed models (EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225) are the replacement.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625023287508,"sku":"MGT-60-5101","price":482.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0296ef1d-a2df-4319-b743-2a9576b3558c.jpg?v=1788662636"},{"product_id":"2-25thp-vgreen-evo-c-face-var-speed-motor","title":"Century VGreen Evo Variable Speed 2.25 THP C Flange Pool Pump Motor, 230\/115 V, 56J Frame","description":"\u003cp\u003eThe Century EVC225 is a VGreen Evo variable speed pool pump motor rated 2.25\/1.50 total horsepower, on a 56J frame with a round C flange. It runs on 230 or 115 volts with automatic voltage detection and is totally enclosed fan cooled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy variable speed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed motor runs at high rpm around the clock, over-circulating the water and spending energy to do it. Variable speed lets you turn the water over at the lowest rpm that keeps it clear. Running slower uses far less power, makes noticeably less noise, and keeps the motor cooler, which is why these motors tend to last longer than the ones they replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and controls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProgramming is done through an interface built into the motor, using a single button to select pre-programmed schedules. There is no external controller to wire and no plumbing change, so on most pumps the swap is the same job as fitting a standard single speed or two speed motor. Century lists this motor for use with the Hayward Super and Super II pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSingle phase, 1.7 kW output, 600 to 3450 rpm, service factor 1, 13.5\/17.4 max amps, automatic thermal protection, Class F insulation, 50 C ambient, 50\/60 Hz, continuous duty. Frame length 8.68 in., shaft 0.625 in. diameter with a 7\/16-20 threaded extension, ball bearings both ends, clockwise rotation at the lead end. The motor is California Title 20 compliant and meets the California Energy Commission rules for replacement pool pump motors.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625580671188,"sku":"MGT-60-4055","price":681.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_97932f16-344c-4e44-8179-2312282d85ed.png?v=1788688786"},{"product_id":"energy-efficient-pump-motor-full-rated-1-5-hp-115-230v","title":"Century Energy Efficient Pump Motor, Full Rated, 1.5 HP, 115\/230V","description":"\u003cp\u003eThe Century ST1152 is a full rated, energy efficient 1.5 HP pool pump motor for 115 or 230 volt supplies. It uses the 56J frame with a round flange and turns at 3450 rpm, the standard threaded shaft pattern for pool pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate and build\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOutput is 1.5 HP, 1.1 kW, on 208 to 230 or 115 volts, drawing 10.4 to 9.8 amps at the higher voltage or 19.6 amps at 115. It is a capacitor start capacitor run motor with across the line starting, sealed ball bearings at both ends, a sealed switch design and a 303 stainless shaft threaded 7\/16 in. The enclosure is open drip proof with automatic thermal protection, rated for a 50 C ambient, class B insulation, UL 1081 design. Overall length is 15.19 in. with a 9.25 in. frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury lists it for the Hayward Super II Energy Efficient, the Hayward NorthStar Full Rate and the Jacuzzi Magnum Full Rate. Full rated means the stated horsepower is the real output, not a figure reached by counting the service factor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and is not sold in California. For that market Century builds six variable speed models that conform to the CEC standards: the V-Green EVO EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625583849684,"sku":"AOS-60-5065","price":422.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d45774c6-16fa-420a-81b6-91535d9d9d74.jpg?v=1788688948"},{"product_id":"1-65thp-vgreen-evo-c-face-var-speed-motor","title":"Century VGreen Evo Variable Speed 1.65 THP C Flange Pool Pump Motor, 230\/115 V, 56J Frame","description":"\u003cp\u003eThe Century EVC165 is a VGreen Evo variable speed pool pump motor rated 1.65\/1.50 hp, wired for 230 or 115 V, on a 56J frame with a round C flange. It replaces a single speed or two speed motor on the pump you already have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat variable speed changes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed motor runs flat out whenever it runs, which over circulates the water and burns energy doing it. This motor is adjustable from 600 to 3450 rpm, so the pool can be turned over at the slowest speed that still keeps the water clean. Lower speeds are quieter, run the motor cooler, and cut the running cost of the pool without touching the pump itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe VGreen Evo carries its own user interface, so there is no separate drive to mount and no extra wiring or plumbing to add. Programming is done through a single button with a set of pre programmed schedules. Voltage detection is automatic between 230 and 115 V, and freeze protection is built in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTotally enclosed fan cooled, Class F insulation, rolled steel frame, 8.68 in. frame length, 0.625 in. threaded shaft with a 7\/16-20 extension, 10.5\/17.7 max amps. The motor conforms to California Energy Commission pool pump replacement motor regulations, so it is Title 20 compliant and can ship to California.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625711939796,"sku":"MGT-60-4054","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_43c36cf5-5fe7-4e84-a620-4f322cc52b82.jpg?v=1788689006"},{"product_id":"square-flange-full-rated-pool-and-spa-pump-motor-2-hp","title":"Century Square Flange Full-Rated Pool and Spa Pump Motor, 2 HP","description":"\u003cp\u003eThe Century B2748 is a full rated 2 HP square flange motor for pool and spa pumps. It runs at 3450 RPM on 230 V, in a Y56Y frame with a threaded shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the replacement motor for a number of common wet ends: Hayward TriStar, Pentair Challenger and WhisperFlo, and the Jandy Stealth SHPF and SHPM series. Always read the old motor nameplate and confirm the horsepower, frame and shaft before ordering, since one pump body is often built with several motor options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSealed ball bearings at both ends, a stainless steel threaded shaft, an open dripproof enclosure and a 50 C ambient rating. The motor is a permanent split capacitor design, switchless, thermally protected, built to UL 1081 and rated for continuous duty with a 1.3 service factor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia buyers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor does not meet California Title 20 and cannot be sold, shipped or installed in California. Century makes six compliant replacement models for that market, the V-Green EVO EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625721934036,"sku":"MGT-60-2748","price":540.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2aca61b6-a66b-4c4e-ad1b-e8f1aee867fa.png?v=1788689959"},{"product_id":"energy-efficient-pump-motor-two-speed-full-rated-1-5-x-1-4-hp-230v","title":"Century Energy Efficient Two Speed Pump Motor, Full Rated, 1.5 x 1\/4 HP, 230V","description":"\u003cp\u003eThe Century STS1152R is a full rated, energy efficient two speed motor for pool pumps. It is rated 1-1\/2 HP on high and 1\/4 HP on low at 230 V, on a 56J frame, and it is the motor used with the Hayward Super Pump, Super II and Max-Flo II.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speeds matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh speed, 3450 rpm, is there for the jobs that need flow: vacuuming, backwashing and moving water through a heater. Low speed, 1725 rpm, turns the pool over quietly at a fraction of the current draw, and that is where the bulk of a filtration schedule belongs. Service factor is 1.3 and the motor draws 9.0 A on high and 3.3 A on low.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll copper windings, a sealed switch design, ball bearings at both the drive and opposite drive ends, and a rolled steel frame in an open drip proof enclosure. Thermal protection is automatic. The shaft is 303 stainless steel with a 7\/16 in. thread, 0.625 in. in diameter, and the motor measures 15.63 in. overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor meets the 2008 California Energy Commission appliance regulations, but it is not California Title 20 compliant. Confirm your local requirements before ordering, and match the frame, voltage and shaft to the wet end you already have.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625724096724,"sku":"AOS-60-5227","price":601.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dd0a124f-6aae-47f0-be10-f5b0347d3ccc.gif?v=1788690100"},{"product_id":"2-hp-56y-frame-up-rate-motor-230-115v","title":"Century 2 HP, 56Y Frame, Up-Rate Motor 230\/115V","description":"\u003cp\u003eThe Century B859 is a 2 HP up-rate replacement motor on the 56Y frame, wired for 230 or 115 volts. It replaces the motor on a wide run of threaded shaft Sta-Rite and Pentair pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical and mechanical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSingle speed and switchless, running at 3450 RPM, with a maximum draw of 11.2 amps at 230 volts or 22.4 amps at 115 volts and a service factor of 1.10. The shaft is threaded. Overall dimensions are 14 in. long by 8 in. wide by 6.5 in. deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps it serves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn the Sta-Rite side: Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas and Dyna-Max. On the Pentair side: WhisperFlo, Challenger, Pinnacle and the Anthony AR2 Series. Century also lists a long set of substitute part numbers for this motor, so an old motor stamped 177476, 177217, 18254, B2859, C1247, EB859, EUSQ1202, P719 or V18254 among others is covered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne restriction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not for sale in California. Confirm your delivery address before ordering.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625727766740,"sku":"MGT-60-5288","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ed4c8445-4cc2-49ca-b17a-9f5970ca788e.jpg?v=1788690185"},{"product_id":"square-flange-full-rated-2hp-2-speed-230v","title":"Century Square Flange 2 HP Two Speed Pool Pump Motor, 230V","description":"\u003cp\u003eThe Century B985 is a two speed square flange pool and spa pump motor for 230 volt service, running 3450 RPM on high and 1725 RPM on low.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHalf speed cuts noise and energy draw sharply while still turning the water over, so most of the filtering day can run low and the high speed is kept for vacuuming, heating and backwash. The motor uses a capacitor start and run design on the low speed and a PSC arrangement on high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a 56Y frame motor in an open dripproof enclosure with automatic thermal protection, class B insulation and a 1.10 service factor. The square flange is aluminum, the shaft is 303 stainless in a threaded 5\/8 inch diameter and 1-7\/8 inch length, and it turns on ball bearings rated for a 50 degree C ambient. Overall length is 14.40 inches on a 6-1\/2 inch body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the rating\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe listing carries two different descriptions of the rating. The product title calls it full rated at 2 HP, while the manufacturer copy describes an up rated motor at 2\/0.33 HP with 2.2 total HP. The total horsepower figure is the one to compare against your pump. This motor is also flagged as not for sale in California.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625742807252,"sku":"MGT-60-5136","price":688.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7843df4a-f751-48bc-82bb-3272911f647d.jpg?v=1788690525"},{"product_id":"energy-efficient-3-hp-square-flange-motor-208-230v","title":"Century Energy Efficient 3 HP Square Flange Motor 208\/230V","description":"\u003cp\u003eThe Century B2844 is a 3 HP square flange pool pump motor built for 208-230 volt service. It runs at 3450 RPM on a 56Y frame with a 1.15 service factor, giving a total horsepower of 3.45.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReading the ratings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePool motors get quoted two ways. The nameplate horsepower here is 3 HP, and the total horsepower, the nameplate figure multiplied by the 1.15 service factor, is 3.45 THP. Both numbers describe the same motor, so match whichever one your old motor was sold under.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and wiring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a square flange 56Y frame motor with a 5\/8 inch shaft, 7\/16 inch shaft length and a 14.40 inch overall length. It is single voltage, 208-230 volt at 60 Hz, so confirm the supply at the pad before ordering. The motor ships on its own, without seals or a wet end.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625743954132,"sku":"MGT-60-5121","price":633.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_716fce8a-0058-4832-9822-2d70a59741ab.gif?v=1788690664"},{"product_id":"pump-motor-up-rated-75-hp-115-230v","title":"Century Pump Motor, Up Rated, .75 HP, 3450 RPM, 115\/230 V, 56J, Threaded Shaft","description":"\u003cp\u003eThe Century UST1072 is an up rated 3\/4 hp pool pump motor for the Hayward Super Pump, Super II and Max-Flo II, covering the 1600X and 2600X series. It is a single speed 3450 rpm motor on a 56J frame with a threaded shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSingle phase, 60 Hz, wired for 230 or 115 V and drawing 5.5 A or 11.0 A respectively. Output is 3\/4 hp, 0.56 kW, at a service factor of 1.00. It is a capacitor start, capacitor run design with a sealed switch, built to UL 1081, open drip proof, with automatic thermal protection and a 50 C ambient rating. Insulation is class B.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMechanical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e56J frame with round mounting and a rolled steel shell. The shaft is 303 stainless steel with a 7\/16 in. thread, 0.625 in. in diameter with a 2.56 in. extension, running on ball bearings at both ends with a 304 bearing at the shaft end. Overall length is 13.20 in. and the frame length is 7.38 in. Rotation is counterclockwise viewed from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia buyers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and is not sold into California. Century lists the V-Green EVO models, EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225, as the pool pump motors in its range that conform to the CEC standards.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625747132628,"sku":"AOS-60-5239","price":262.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7a824b68-a38c-426c-becc-b429297f1b2b.jpg?v=1788691336"},{"product_id":"century-e-plus-b2841v1-square-flange-full-rated-pool-pump-motor-1-hp-3450-rpm-115-208-230-v-56y-threaded-shaft","title":"Century E-Plus B2841V1 Square Flange Full-Rated Pool Pump Motor, 1 HP","description":"\u003cp\u003eThe Century B2841V1 is a 1 HP square flange pool and spa pump motor from the E-Plus line. It runs 3450 RPM on 115 or 208-230 V, in a 56Y frame with a threaded shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFull-rated, and why that matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFull-rated means the motor makes its 1 HP as its working rating rather than reaching it through the service factor. Two motors can both say 1 HP on the nameplate and not be the same motor. If the pump you are repairing came with a full-rated motor, replacing it with an up-rated one loses you flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe three things to check\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFrame, flange and shaft decide whether a replacement motor works. This one is 56Y frame, square flange, threaded shaft. Compare all three against the motor coming off the pump, along with the horsepower and the voltage available at your pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe threaded shaft takes a threaded impeller, which is the standard arrangement on the pumps this motor is built to replace. Replace the shaft seal whenever the motor comes off, since disturbing the old one is what turns a motor swap into a leak.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625748246740,"sku":"MGT-60-5186","price":391.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/MGT-60-5186_1a.png?v=1788691512"},{"product_id":"energy-efficient-motor-full-rated-2-hp-230v","title":"Century Energy Efficient Motor, Full Rated, 2 HP, 230V","description":"\u003cp\u003eThe Century SQ1202 is a full rated 2 HP energy efficient pool pump motor for 230V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFull rated versus up rated\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFull rated is the honest number. A full rated 2 HP motor produces 2 HP before the service factor is counted, while an up rated motor of the same nameplate figure gets there only once the service factor is applied. If your pump was specified with a full rated motor, matching it keeps the flow the system was designed around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia restriction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant. It cannot be sold or installed in the state of California. If the pool is in California, this is not the motor to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTake the details off the label of the motor that is on the pump now: horsepower, voltage, frame and shaft. A pool pump wet end is built around one motor pattern, and the old nameplate is the only reference that will not steer you wrong.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625748508884,"sku":"AOS-60-5061","price":511.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cee04996-954a-4b88-8a1d-e4a07610881e.jpg?v=1788691544"},{"product_id":"energy-efficient-motor-full-rated-1-5-hp-230v","title":"Century Energy Efficient Motor, Full Rated, 1.5 HP, 230v","description":"\u003cp\u003eThe Century SQ1152 is a full rated 1.5 horsepower square flange pool pump motor, single speed, 48Y frame, running at 3450 rpm on 208\/230 volts. It draws 10.4 amps and carries a 1.47 service factor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFull rated, not up rated\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFull rated means the 1.5 horsepower is the actual output before the service factor is applied. An up rated motor of the same nominal size delivers less. If the pump you are repairing came with a full rated motor, replacing it with an up rated one changes how the pump performs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSealed ball bearings at both ends, a 303 stainless steel shaft with a 1\/2 inch thread, an open drip proof enclosure and capacitor start capacitor run electricals. It is rated for a 50 C ambient, class B insulation, continuous duty, and is UL recognized under the 1081 design at 74.4 percent efficiency.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eListed for the Sta-Rite Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas and Dyna-Max, and for the Pentair WhisperFlo. Rotation is counterclockwise viewed from the pump end and the overall length is 13.94 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia buyers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and is listed as not for sale in California. If the pool is in California, look at a variable speed motor that meets the state standard instead.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625784193236,"sku":"AOS-60-5060","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_54489f80-d6d6-492a-a45b-889196b83967.jpg?v=1788692184"},{"product_id":"motor-1-hp-115v-48y-frame","title":"Century Motor, 1 HP, 115v, 48Y Frame","description":"\u003cp\u003eThe Century BN25V1 is a 1 horsepower up rated pool pump motor, 115 volt, 48Y frame, single speed at 3450 RPM with a 1.0 service factor and a 12 amp draw. It carries the number that replaced the older BN25SS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe workhorse of above ground pumps\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA great many above ground pool and spa pumps are built around this motor. It appears in the parts lists for Hayward Power-Flo LX, Power-Flo II and III and SP-1500 series pumps, the Pentair Dynamo, the Sta-Rite JWPA, and the Waterway Executive, Workman, Hi-Flo and Supreme 48 frame pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll copper windings, an automatic thermal protector, an open drip proof enclosure and a stainless steel threaded shaft with a thrubolt pump mount, built to the 1081 design at 60 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck three things on the old motor: the frame is 48Y, the voltage is 115, and the rating is up rated at 1.0 service factor. If any of those differ, the replacement is a different part number.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625784226004,"sku":"MGT-60-7025","price":236.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_98be7e2b-4e74-4aa2-ab5a-4ebe2def2b7e.jpg?v=1788692188"},{"product_id":"square-flange-ur-75hp-115-230v","title":"Century Square Flange Up-Rate Motor .75HP 115\/230V USQ1072","description":"\u003cp\u003eThe Century USQ1072 is a square flange replacement pool pump motor rated 3\/4 horsepower up-rate, wired for either 115 or 230 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the motor to the pump\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree things have to line up: the flange, the horsepower rating and the voltage. This is the square flange version, so it will not bolt to a pump built for a round flange. The 3\/4 HP up-rate label is what to compare against the plate on your existing motor, since an up-rate and a full rate motor of the same nominal horsepower are not the same machine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUSQ1072 appears in the parts breakdowns for the Sta-Rite Max-E-Glas II and Dura-Glas II, the Max-E-Glas and Dura-Glas, the Dyna-Glas and Dyna-Max, the Max-E-Pro, and the Hayward Max-Flo II.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia buyers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot be used for a pool pump installation in that state. The specified alternative is the EVQ130. Check your local requirements before ordering, since other jurisdictions have adopted similar efficiency rules.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625785340116,"sku":"AOS-60-5206","price":273.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_08004db3-c63d-4a57-ba0b-f04f212f40ef.jpg?v=1788692351"},{"product_id":"threaded-ur-1-5hp-115-230v","title":"Century B229SE Threaded Up Rated 1.5 HP Pool Pump Motor, 115\/230V","description":"\u003cp\u003eThe Century B229SE is a 1-1\/2 HP up rated pool pump motor with a threaded shaft. It runs at 3450 RPM on 115 or 230 volts, single phase, with a 1.00 service factor and a 56J round flange frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThreaded shaft, C face\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft is 303 stainless steel and threaded, so a threaded shaft impeller screws directly onto it. It is the Century 1081 C face design with ball bearing construction, and the C dimension, meaning motor plus shaft, is 13.06 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUp rated versus full rated\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUp rated and full rated motors of the same size carry different nameplate horsepower. An up rated 1-1\/2 HP motor like this one has a 1.00 service factor. Replacing a full rated motor with an up rated one, or the other way round, changes the flow your pump produces, so match what the pump was built with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the frame, the shaft type and the C dimension against your old motor. Wiring a dual voltage motor for the wrong supply voltage will destroy it, so have the voltage selection confirmed by a qualified electrician or service technician.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625791172820,"sku":"MGT-60-5214","price":354.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f3045dbd-bcf1-4405-9f23-97db3c9da74f.jpg?v=1788700189"},{"product_id":"motor-up-rated-1-5-hp-115-230v","title":"Century Up Rated Pool Pump Motor, 1.5 HP, 115\/230V, Square Flange","description":"\u003cp\u003eThe Century USQ1152 is an up rated, square flange pool pump motor rated at 1-1\/2 HP on 230 or 115 volts. It is the 48Y frame format used by Sta-Rite Max-E-Glas, Dura-Glas I and II, and Max-E-Pro pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching your old motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHorsepower on its own does not identify a pool motor. Read the nameplate on the one you are removing and match the frame, the flange, the horsepower and the service factor together. This one is 48Y, square flange, 1-1\/2 HP with a 1.1 service factor, 3450 rpm, single phase, 60 Hz. Current draw is 8.75 A at 230 V and 17.5 A at 115 V, so check the breaker and wiring for the voltage you intend to run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBall bearings at both ends, capacitor start with across the line starting, an open drip proof enclosure and continuous duty rating, class B insulation and automatic thermal protection. The shaft is 303 stainless steel with a 1\/2 inch thread and a 0.625 inch diameter, which matters on a pump that sits wet for years. Overall length is 13.82 inch and rotation is counterclockwise viewed from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the motor is off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA motor change is the natural time to replace the shaft seal and the pump gaskets. Fitting a new motor behind a tired seal usually means taking the pump apart again a few weeks later.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625792516308,"sku":"AOS-60-5075","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e16d596a-92d0-4f92-a3a0-577cded0b7fe.jpg?v=1788700247"},{"product_id":"motor-3-4hp-115-230v","title":"Century 3\/4 HP Pool Pump Motor, 115\/230V, C-Face Threaded Shaft","description":"\u003cp\u003eThe Century B127 is a 3\/4 HP replacement pool pump motor, dual voltage at 230\/115 V, running 3450 rpm on a 1.5 service factor. It is an S56J frame motor with C-face mounting and a threaded shaft, which is the combination used by a large run of older pool pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is built\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a permanent split capacitor motor, switchless, so there is no centrifugal start switch to fail. The enclosure is open dripproof on a rigid base, rated for continuous duty at a 50 C ambient, with ball bearings at both ends and a UL 1081 design. Rotation is counterclockwise viewed from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe shaft\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft is 303 stainless steel with 7\/16\" threads, 0.625\" in diameter and a 2.57\" extension, and the motor measures 12.01\" overall. Stainless matters here: a plated shaft in a wet pump seal chamber will pit and then chew up every seal you fit afterwards. Century lists ST1072 as a substitute part number for this motor.\u003c\/p\u003e\u003cp\u003eChange the pump shaft seal while the motor is out. It is a few dollars against a job you do not want to do twice.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625842520276,"sku":"MGT-60-5098","price":286.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f5617571-db07-488d-946a-621efee3ef89.jpg?v=1788701382"},{"product_id":"motor-full-rated-1-5-hp-115-230v","title":"Century 1.5 HP Full Rated Pool Pump Motor, 115\/230V, Single Speed","description":"\u003cp\u003eThe Century B2858 is a full rated 1.5 HP pool pump motor, dual voltage at 230\/115 V, single speed at 3450 rpm with a 1.5 service factor. It carried the part number B858 before it became B2858, so an old motor tag with the shorter number leads to this one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it goes on\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury lists it for use with the Pentair Challenger, the WhisperFlo WF-6 and the Pinnacle. Check the frame and shaft against the motor you are removing before ordering: it is a Y56Y frame with a 1\/2\" threaded shaft, 0.625\" in diameter with a 0.91\" extension, and 14.40\" overall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a permanent split capacitor design, switchless, with sealed ball bearings and a stainless steel shaft. The enclosure is open dripproof, insulation class F, rated for continuous duty at a 50 C ambient, to a UL 1081 design.\u003c\/p\u003e\u003cp\u003eAs with any motor swap, plan to change the pump shaft seal at the same time. The seal has to be disturbed to get the motor out, and reused seals tend to weep.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625842847956,"sku":"MGT-60-2858","price":485.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c9f12823-ee7d-4dbc-87fc-9e11f3a8408f.jpg?v=1788701387"},{"product_id":"terminal-board","title":"Century Terminal Board for UST\/USQ Series Motors","description":"\u003cp\u003eThis is the Century terminal board for UST and USQ series motors, part number 626531. It is the board inside the motor end cover where the supply leads and the motor leads land.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTerminal boards fail from heat. A connection that was never quite tight arcs under load, the arcing chars the board, and once the plastic is burned or a terminal is damaged there is no cleaning it up. Replacing the board is a fraction of the cost of the motor when it is the only thing that has failed.\u003c\/p\u003e\u003cp\u003eKill power at the breaker before opening the end cover, and verify the terminals are dead before working on them.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625843372244,"sku":"5271-22","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_76ccf488-9529-4626-ad35-46405b21ac0e.jpg?v=1788701408"},{"product_id":"square-flange-2hp-ee-208-230v","title":"Century Square Flange 2 HP EE 208\/230V Pool Pump Motor B2843","description":"\u003cp\u003eThe Century B2843 is a square flange 2.0 HP pool pump replacement motor for 208 to 230 volt service, with a 1.30 service factor. It is the motor A.O. Smith listed as the SQ1202.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical and mechanical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo horsepower at 208-230V, drawing 11.0 amps at the lower voltage and 10.0 at the higher. Rotation is counterclockwise viewed from the pump end. It runs on ball bearings rather than sleeve bearings and carries a stainless steel shaft, which matters more than it sounds: a plain shaft corrodes over the years and an impeller can seize onto it hard enough that the next rebuild becomes a motor replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the replacement right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch three things before ordering: the mounting, which is square flange here, the horsepower and service factor, and the supply voltage. Those are printed on the label of the motor you are removing. The same motor turns up under a long list of numbers, including B843, SQ1202, AOSB843, 38533, 5324-0, 663001726104 and 0-193995-07, so a part number that does not match exactly is worth checking against that list before you rule it out.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48625844748500,"sku":"MGT-60-5143","price":574.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d30c6cb6-fb53-4864-a6c1-bab7ea016a17.png?v=1788701460"},{"product_id":"energy-efficient-motor-up-rated-2-hp-208-230v","title":"Century Energy Efficient Motor, Up Rated, 2 HP, 208-230v","description":"\u003cp\u003eThe Century USQ1202 is a 2 horsepower up rated square flange pool pump motor for 208-230v service. It runs at 3450 rpm on a 48Y frame with an open drip proof enclosure, and it is Century energy efficient build rather than a base replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for the equipment pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor uses sealed ball bearings at both ends, a capacitor start capacitor run design and a 303 stainless steel shaft. It carries automatic thermal protection and is rated for a 50 C ambient, which is the kind of heat a pump shed reaches on a summer afternoon. The stainless shaft is the detail that matters most at replacement time, because a corroded shaft is what turns a seal change into a whole motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching it to your pump\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury lists it for Sta-Rite Max-E-Glas II, Dura-Glas II, Max-E-Pro, Dyna-Glas and Dyna-Max. Before ordering, check three things on the old motor: the frame, the flange, and whether it was up rated or full rated. Getting the rating wrong changes the flow the pump actually delivers even though the horsepower on the label looks the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the motor is off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFit a new mechanical seal with the motor. The seal wears in against the faces it started life with and rarely survives a reinstall, and it is far cheaper to change now than after the pump is back on line and dripping.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626106400980,"sku":"AOS-60-5076","price":433.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bc989770-077f-44e6-8429-ed6b43d27406.jpg?v=1788704870"},{"product_id":"motor-full-rated-75-hp-115-230v","title":"Century Motor, Full Rated, 48Y Frame, .75 HP, 3450 RPM, 115\/230V","description":"\u003cp\u003eThe Century QC1072 is a full rated 3\/4 HP pool pump motor on the 48Y frame, running at 3450 rpm on 115V or 230V single phase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReading the nameplate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFull rated matters. The output is 0.56 kW, a genuine 3\/4 HP, with a 1.65 service factor on top rather than horsepower borrowed from the service factor to make a bigger number on the label. Current is 6.3 A at 230V and 12.6 A at 115V, the enclosure is open drip proof, thermal protection is automatic, insulation is class B and the duty rating is continuous to 50 C ambient. It is UL recognized and CSA listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed against the Sta-Rite Dura-Glas II and Max-E-Glas II parts groups covering the P4R, P4RA, P4E and P4EA pumps, and the Max-E-Pro series. As with any motor swap, the safe method is to read the old nameplate first and match frame, horsepower, service factor and voltage before the new one is ordered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the shaft and the mounting on the pump you are working on, and plan on a fresh shaft seal at the same time. A motor change is the one moment the seal is already apart, and putting the old one back is how a dry, weeping pump starts.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626224627924,"sku":"AOS-60-5215","price":376.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_76061b7f-a6a0-4020-ac64-4351c387c402.png?v=1788706534"},{"product_id":"b2977-century-c-face-motor-230-v-8-9-3-1-a-2-5-hp-56j-frame-1-phase-2-speed-60-hz","title":"Century C-Face Pool Pump Motor, 2.5 HP, 56J Frame, 2-Speed","description":"\u003cp\u003eThe Century B2977 is a two speed C-face pool pump motor, 2.5 HP on a 56J frame, running on 230 V single phase at 60 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps it serves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury lists it for the Hayward NorthStar built after 2008, the Jandy JHP and JHPU, the Jandy HHP and HHPU, and the Jacuzzi Magnum Plus. Match the frame, the shaft and the voltage to the motor you are removing before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the two speeds work\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh speed is 3450 rpm and is switchless. Low speed is 1725 rpm and runs through a microswitch. Running low for daily turnover and reserving high speed for vacuuming or backwashing is where a two speed motor earns its keep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction and dimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a permanent split capacitor motor with sealed ball bearings at both ends, a rolled steel frame and a drip proof enclosure, with a 1.3 service factor. The shaft is 7\/16 in threaded 303 stainless steel, 0.625 in in diameter with a 2.57 in extension. Overall length is 13.05 in over an 8.00 in frame, which is the measurement to check against the old motor.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626266407124,"sku":"MGT-60-2977","price":493.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6e275e2e-653d-49f0-9d89-674f049c5457.png?v=1788707498"},{"product_id":"threaded-75hp-polaris-p61-115-230v-b625","title":"Century Threaded .75 HP Polaris P61 Booster Pump Motor 115\/230V","description":"\u003cp\u003eThe Century B625 is the three quarter HP threaded shaft motor for the Polaris booster pump, listed by the manufacturer as identical to the P61 115\/230V motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThreaded shaft\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBooster pumps do not take an ordinary pool motor. The shaft on this one carries 1\/2 inch threads, which is how the booster wet end mounts, so a standard keyed shaft motor is not a substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical and mechanical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a single phase, dual voltage motor rated 230\/115 V at 60 Hz, running 3450 rpm on an N56CZ frame with a 1.5 service factor and a continuous duty rating. Full load current at service factor is 6.4\/12.8 A. Construction is drip proof with sealed ball bearings at both ends, a rolled steel frame and Class B insulation, rated to a 40 C ambient and thermally protected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRotation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacturer data states rotation two ways, as CW Non-Reversible and as Counterclockwise Pump End. It is a single rotation motor either way, so the wet end goes back together the way it came apart.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626280693972,"sku":"MGT-60-5109","price":317.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a855a4f4-9264-4696-badc-d03602de5c8a.jpg?v=1788707592"},{"product_id":"square-flange-full-rated-2hp-3-phase-208-230-460v","title":"Century Square Flange Full Rated 2HP 3 Phase 208\/230\/460V Pump Motor","description":"\u003cp\u003eThe Century H637 is a square flange, full rated 2HP three phase pool pump motor. It runs on 208, 230 or 460 volts at 60 Hz, turns 3450 RPM on a 56Y frame, and carries a 1.30 service factor for 2.6 total horsepower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThree phase, not household power\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a commercial motor. Three phase service is what you find at a hotel, a club, a municipal pool or a light industrial site, not at a typical residence. Before ordering, confirm what is actually feeding the pad. A three phase motor cannot be made to run on single phase power by rewiring it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFull rated versus up rated\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFull rated means the 2HP on the nameplate is the honest horsepower before the service factor is counted. Multiply by the 1.30 service factor and you get the 2.6 THP figure. That distinction matters when you are matching a replacement to an existing pump, because an up rated motor of the same total horsepower carries a lower nameplate rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe square flange 56Y frame is the standard pool pump mount, and it bolts to a large share of wet ends without adapters. Check the flange style and the shaft on the motor you are replacing. Round flange and C face motors share the 56Y frame designation but do not interchange with a square flange.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626304483540,"sku":"MGT-60-5196","price":620.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_29336f16-3c75-4515-b4f2-c3088ce9cc1d.jpg?v=1788707942"},{"product_id":"square-flange-fr-1hp-2sp-230v","title":"Century Square Flange Full Rated 1 HP 2 Speed 230V Pool Pump Motor SQS1102R","description":"\u003cp\u003eThe Century SQS1102R is a two speed, square flange replacement pool pump motor, full rated at 1 HP on high speed and 0.17 HP on low, turning 3450 and 1725 RPM. It runs on 230 volt and uses a 48Y frame with a threaded shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost of a pool day does not need full flow. Low speed turns the water over quietly at a fraction of the draw, and high speed is there for vacuuming, backwashing and heating. Swapping a single speed motor for a two speed one is the cheapest way to cut a filtration bill without replumbing anything.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck before you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree things decide whether this motor drops in: the square flange mounting face, the 48Y frame, and the threaded shaft that your impeller has to thread onto. Confirm all three against the motor you are pulling out, along with a 230 volt supply.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626358386900,"sku":"AOS-60-5221","price":558.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ac96e4f3-5b01-47a5-bf0f-1cef20fc027a.jpg?v=1788709210"},{"product_id":"century-1-30-thp-v-green-evo-c-face-variable-speed-motor","title":"Century VGreen Evo Variable Speed 1.30 THP C Flange Pool Pump Motor, 230\/115 V, 56J Frame","description":"\u003cp\u003eThe Century EVC130 is a 1.30 THP VGreen Evo variable speed motor with a 56J C face flange, wired for 230 or 115 volts. It is sold as a motor on its own, so an older single speed or two speed pump can be converted to variable speed without replacing the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy variable speed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed motor runs at full rpm every hour it is on, which moves far more water than a pool needs and burns the energy to do it. Dropping the speed lets the pump hit the same daily turnover over a longer, slower run, and the power draw falls sharply with it. The side effects are worth having on their own: a motor at low rpm is much quieter and runs cooler, which is easier on the bearings and the windings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSetting it up\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpeed schedules are programmed on the motor through a single button interface, using pre set operating schedules. Nothing else has to be wired in, and there is no separate controller to mount at the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the frame and flange on the motor you are replacing. This is the 56J round C face version. The same VGreen Evo motor is built in a square flange pattern and in 1.65 and 2.25 THP outputs, so the flange and the horsepower both need to match what the pump was built for.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626474909908,"sku":"MGT-60-4053","price":590.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6222319c-aa5d-4983-b039-98c03093ffab.jpg?v=1788710639"},{"product_id":"square-flange-fr-3hp-3ph-208-230-460v","title":"Century Square Flange Pool Pump Motor, 3 HP, 3 Phase, 208\/230\/460V","description":"\u003cp\u003eThe Century H755 is a 3 HP square flange replacement pool pump motor for three phase power, wired for 208, 230 or 460 volts. It is a motor, not a complete pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSquare flange and three phase\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo things decide whether this motor fits. The first is the mounting: a square flange face bolts to a pump built for it and will not swap onto a C-face or threaded shaft pump. The second is the supply. Three phase power is a commercial and light industrial arrangement, so these motors turn up on club, hotel and municipal pads rather than residential ones. If your pad only has single phase, this is not the motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching it to your pump\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTake the nameplate off the motor you are pulling and check horsepower, phase, voltage and flange type against the specs above. The wet end stays: seal plate, impeller and housing all carry over, and it is worth fitting a new shaft seal while the pump is apart.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626495750356,"sku":"MGT-60-5200","price":664.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_406213eb-e52d-4dc7-aa88-99dde29b1959.jpg?v=1788710935"},{"product_id":"1hp-square-flange-up-rated-motor-115-230v","title":"Century 1 HP Square Flange Up-Rated Motor, 115\/230V","description":"\u003cp\u003eThe Century USQ1102 is a single speed 1 HP up-rated pool pump motor with a square flange mounting, wired for either 115 or 230 volts. It runs at 3450 RPM on a 48Y frame with a 1.25 service factor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for wet, hot equipment pads\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft is 303 stainless steel with a 1\/2 inch thread, sized at 0.625 inch diameter with a 0.906 inch extension. Both ends run on sealed ball bearings, the enclosure is open dripproof, and thermal protection is automatic. The motor is rated for a 50 degree Celsius ambient and continuous duty, with class B insulation and capacitor start across the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury lists the USQ1102 for the Sta-Rite Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas and Dyna-Max pumps, for the Pentair Whisperflo and Pinnacle, and for the Anthony AR2 series. Before ordering, check the frame, flange type, horsepower, service factor and shaft against the motor coming off the pump, because a square flange 48Y is only interchangeable with another square flange 48Y.\u003c\/p\u003e\u003cp\u003eOverall length is 12.82 inches with a frame length of 8.94 inches. Rotation is counterclockwise viewed from the pump end, and the motor mounts horizontally.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626583765204,"sku":"AOS-60-5074","price":323.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_020b65e7-ca47-41d0-bd19-6a70b77601a6.jpg?v=1788712720"},{"product_id":"energy-efficient-pump-motor-full-rated-3hp-230v","title":"Century Energy Efficient Pump Motor, Full Rated, 3 HP, 230V","description":"\u003cp\u003eThe Century ST1302V1 is a full rated 3 HP replacement pool pump motor built to the energy efficient standard. It turns 3450 RPM on 208-230 V single phase power, carries a 1.15 service factor, and uses a Y56J frame with C face mounting and a threaded 0.625 inch shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat full rated means here\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome motors reach their advertised horsepower only by counting the service factor. This one does not. The nameplate output is 3.0 Hp, or 2.2 kW, and the 1.15 service factor sits above that as headroom. Current draw is listed at 15.0 to 13.3 A across the voltage range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSealed ball bearings run at both the drive and opposite drive ends, and the switch is a sealed design, which matters on an equipment pad where dust and insects find their way into anything open. The shaft is 303 stainless with a 304 bearing shaft end, the frame is rolled steel, and the enclosure is drip proof. It is rated for a 50 C ambient and is thermally protected, so a hot pad in midsummer is within its design envelope.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor is listed for Jandy HHP and HHPU series, Hayward RS Series and Hayward Super II SP3000 Series pumps. Overall length is 14.86 inches with a 9.25 inch frame length and a 2.53 inch shaft extension, so compare those numbers against the motor you are removing along with the frame, voltage and horsepower on its nameplate.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626819399892,"sku":"AOS-60-5068","price":680.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f05fb954-9009-4fe5-b71d-56b5850c94f5.jpg?v=1788715425"},{"product_id":"century-pro-hsq260-square-flange-motor-2-6-hp-3450-rpm-230-v-48y-threaded-shaft","title":"Century Pro HSQ260 Square Flange Pump Motor, 2.6 HP, 3450 RPM, 230V, 48Y","description":"\u003cp\u003eThe Century HSQ260 is a Centurion Pro square flange pool and spa pump motor rated 2.6 HP at 3450 RPM on 230 V. It uses a 48Y frame with a threaded shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSquare flange, not round\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe square flange is the mounting face that bolts to the pump seal plate. It is a different pattern from a C face or round flange motor, so this is a replacement for a pump that already carries a square flange 48Y motor. The threaded shaft accepts a standard threaded impeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSingle speed at full RPM\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a single speed motor running at 3450 RPM. It suits a pump controlled by a timer or a simple on and off relay, where the flow rate is set by the pump and plumbing rather than by a speed controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTake the nameplate off the motor you are removing and match five things: horsepower, frame, flange type, shaft type and voltage. Wet ends are often sold with more than one motor option over the years, so the model of the pump alone is not enough to go on.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626820186324,"sku":"AOS-60-2734","price":577.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/AOS-60-2734-_1a.png?v=1788715434"},{"product_id":"century-evq130-1-30-thp-v-green-evo-square-flange-variable-speed-motor","title":"Century VGreen Evo Variable Speed 1.30 THP Square Flange Pool Pump Motor, 230\/115 Volt","description":"\u003cp\u003eThe Century VGreen Evo EVQ130 is a 1.30 total horsepower variable speed motor on a 48Y square flange frame. It is built to bolt onto an existing pump in place of its single or two speed motor: the wet end stays, the plumbing stays, and the motor carries its own drive and user interface, so there is no separate controller to mount or wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy variable speed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed motor runs flat out whenever it runs, pushing more water than the pool needs and paying for it in electricity. A variable speed motor turns the same water over at a lower rpm for longer, which draws a fraction of the power, runs noticeably quieter and keeps the motor cooler, which in turn extends its life. Century lists the EVQ130 as compliant with California Title 20, and the variable speed class is what current Department of Energy rules expect on replacements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgramming and control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne button on the motor steps through pre-programmed schedules across 600 to 3450 rpm. Voltage is detected automatically on either 230 or 115 V, and freeze protection is built in. On a pad with automation, the motor is listed for the Pentair, Hayward and Jandy systems named in the specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and nameplate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSquare flange, 48Y frame, totally enclosed fan cooled, with a threaded 0.625 in. shaft on a 1\/2-20 thread and an 8.68 in. frame length. Output is 1.30\/1.30 Hp, 0.97 kW, drawing 8.6\/15.6 max amps. Note that the source data lists the frequency as 50\/60 Hz in one place and 50 Hz on the nameplate. Century lists the motor for Pentair Whisperflo, Max-E-Pro, SuperFlo and SuperMax, Hayward Super Pump and MaxFlo, and Jandy FloPro and PlusHP pumps. C face versions and 1.65 and 2.25 THP ratings exist in the same family.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626825756884,"sku":"MGT-60-4050","price":586.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0b7b575-e8a7-4704-9ee1-94da28c4d70d.jpg?v=1788715602"},{"product_id":"century-b2846-square-flange-full-rated-pool-and-spa-pump-motor-0-5-hp-3450-rpm-115-230-v-56y-threaded-shaft","title":"Century B2846 Square Flange Full Rated Pool and Spa Pump Motor, 0.5 HP","description":"\u003cp\u003eThe Century B2846 is a full rated square flange pool and spa pump motor. It produces 1\/2 HP, or 0.37 kW, at 3450 rpm on 230\/115 volts, single phase, in a 56Y frame with a threaded shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate detail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eService factor is 1.95, current is listed at SF 5.4\/10.8 A, and the motor is thermally protected with an open dripproof enclosure rated to a 50 C ambient. Insulation is class F, it runs on two poles, and rotation is counterclockwise viewed from the pump end. Overall length is 12.40 inches with a frame length of 8.00 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShaft and bearings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft is 1\/2 inch threaded stainless steel, 0.625 in diameter with a 0.91 inch extension. Ball bearings sit at both the drive end and the opposite drive end, and the frame is rolled steel. It is a permanent split capacitor design, switchless, built to UL 1081.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury lists this motor for use with the Pentair Challenger, the Pentair Pinnacle, and the Jandy Stealth SHPF\/SHPM series. Square flange motors look alike, so check the flange, the frame and the shaft against the motor you are pulling off before you order.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626844958932,"sku":"MGT-60-2846","price":284.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5751708e-793d-41df-bd4f-95025bb4c24f.png?v=1788715789"},{"product_id":"square-flange-fr-1-5hp-2sp-ee-230v","title":"Century Square Flange Full Rated 1.5 HP 2 Speed 230V Pool Pump Motor","description":"\u003cp\u003eThe Century SQS1152R is a full rated, two compartment pool pump motor built on the 48Y square flange C-face frame. It is rated 1.5\/0.19 HP with a 2.21 total horsepower and a 1.47 service factor, and it runs on 230 volts single phase at 60 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, one motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh speed is 3450 RPM and low speed is 1725 RPM. The motor uses a capacitor start on low speed and runs as a PSC motor on high. In practice that means the pool can filter at the slow speed for the bulk of the day, drawing 3.0 amps instead of 10.0, and step up to full speed when something needs the flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn open dripproof enclosure, ball bearings, automatic thermal protection and continuous duty rating. The shaft is 303 stainless steel, threaded, 5\/8 inch in diameter, and the motor measures 13.67 inches overall in a satin black finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the frame, the flange and the voltage to what is on your pump now. A 48Y square flange C-face motor at 230 volts is a common combination, but it is not the only one, so read the plate on the old motor before ordering.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48626972164308,"sku":"AOS-60-5222","price":603.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_050afdcc-744e-4506-aa19-c24d90357129.jpg?v=1788718596"},{"product_id":"centry-b2849-1-5hp-230v-56y-odp-sqfl-motor","title":"Century 1.5 HP 230V 56Y Square Flange Motor","description":"\u003cp\u003eThe Century B2849 is a 1.5 horsepower pool pump motor rated for 230 volts, built on a 56Y frame with a square flange and open drip proof construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pump motor swap comes down to four numbers: horsepower, voltage, frame and flange. This one is 1.5 HP, 230V, 56Y and square flange. Read the label on the motor being removed and check all four before ordering, since a motor that is close but not identical will not mount or wire the same way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOpen drip proof\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eODP is the open enclosure used on most residential pool pumps. It relies on airflow through the motor for cooling, so keep the vents clear and the motor out of standing water once it is installed.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48627187548372,"sku":"MGT-60-2986","price":460.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/MGT-60-2986_1a.png?v=1788719978"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/century-equipment.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}