{"title":"Chlorinator \u0026 Feeder Parts","description":"\u003cp\u003eShop chlorinator \u0026amp; feeder parts at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"autopilot-dig-electronic-control-board-new-833n","title":"AutoPilot DIG Electronic Control Board New, 833N","description":"\u003cp\u003eThe AutoPilot 833N is the electronic control board for the AutoPilot DIG salt chlorine generator control. This is a new board, sold to replace one that has failed in the field.\u003c\/p\u003e\u003cp\u003eA control board failure usually shows up as a unit that will not power on, will not respond to its buttons, or stops driving the cell. If the cell and the power supply check out, the board is the next thing to replace.\u003c\/p\u003e\u003cp\u003eBefore ordering, open the control box and compare the number printed on the existing board with 833N. AutoPilot has used more than one board across its product line, and the number on the board is the only sure way to match it.\u003c\/p\u003e","brand":"AutoPilot","offers":[{"title":"Default Title","offer_id":48624872325332,"sku":"LEC-451-1003","price":470.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c5b392a0-4644-4694-a87c-6ee1b610995a.jpg?v=1788647780"},{"product_id":"24hr-replacement-timer-120v-60-hz","title":"Hayward 24 Hour Replacement Timer, 120V 60 Hz","description":"\u003cp\u003eThe Hayward GLX-TROL-TIMER is the replacement 24 hour timer for the AquaTrol RJ salt water chlorinator. It is a Grasslin FM\/1 timer rated 120 V, 60 Hz, and it is sold one per carton.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe timer sets the chlorinator's daily run schedule, switching it on and off over a 24 hour cycle. If your AquaTrol RJ has stopped following its schedule, runs constantly or never starts, the timer is the part to check first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your unit is the 120 V AquaTrol RJ. This timer is rated for 120 V, 60 Hz only.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624877207764,"sku":"GLD-451-1044","price":122.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e7e3558f-4723-4211-b12c-c0156914d76f.jpg?v=1788648507"},{"product_id":"pentair-522386-intelliph-oem-pump-repair-kit","title":"Pentair IntellipH OEM Pump Repair Kit","description":"\u003cp\u003eThe Pentair 522386 is the genuine repair kit for the tank mounted OEM pump on IntellipH pH controllers. It services the pump that is already on your controller rather than replacing the whole pump assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn IntellipH pump that is leaking, dosing inconsistently or no longer moving chemical usually needs its wear parts renewed rather than a new pump. This kit is Pentair's answer for the tank mounted version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your IntellipH uses the tank mounted OEM pump, the one that sits on the controller tank. If your pump is a different style or mounted elsewhere, check its part number first.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624877371604,"sku":"PAC-451-2386","price":123.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PAC-451-2386_1a.png?v=1788648529"},{"product_id":"cap-with-o-ring-perform-max-in-ground-feeder","title":"King Technology Cap with O-ring for Perform-Max In Ground Feeder","description":"\u003cp\u003eThe King Technology 01-22-9411 is the replacement cap, with o-ring, for the Perform-Max in ground feeder. It is the same cap the feeder shipped with, so threads and seal match the tank exactly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePerform-Max 920, 940, 960 and 980 in ground feeders, the Pool Frog 5400, 5430 and 5450 mineral water pool systems, and the New Water 120, 400 and 430 cyclers all use this cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cracked cap, stripped threads or a lid that weeps around the seal after tightening are the usual reasons. Because the o-ring is included, a worn seal is fixed at the same time. Wipe the tank threads clean, lightly lubricate the new o-ring and thread the cap on hand tight.\u003c\/p\u003e","brand":"King Technology","offers":[{"title":"Default Title","offer_id":48624881074388,"sku":"KTC-451-7830","price":51.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_aa76001b-cb74-42eb-bf17-85bab5adce32.jpg?v=1788649271"},{"product_id":"lid-o-ring-3-3-4-id-viton","title":"Pentair Lid O-Ring, 3-3\/4 in. ID (Viton)","description":"\u003cp\u003eThe Pentair R172009 is the lid o-ring for Rainbow automatic chlorinators, models 300, 302, 320 and 322. It is made of Viton, a heavy duty fluoroelastomer that stands up to the concentrated chlorine or bromine inside the feeder body far better than a standard rubber ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e3-3\/4 in. inside diameter with a 3\/16 in. cross section. Compare against the old ring if you are unsure which feeder you have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA feeder that weeps water at the cap or lets out a hiss of gas when the pump runs has a lid o-ring that is swollen, flattened or cracked. Unscrew the cap, roll the old ring off, seat this one in the groove and tighten the cap by hand.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624934781140,"sku":"RAI-451-4013","price":10.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_385cab4a-4a55-41a9-a7a3-30a9b591c615.jpg?v=1788655216"},{"product_id":"clear-glass-powerclean-chlorinator-cover","title":"CMP Clear Glass PowerClean Chlorinator Cover","description":"\u003cp\u003eThe CMP 25280-109-200 is the clear glass replacement lid for the PowerClean Ultra chlorinator, supplied with a new lid o-ring. CMP offers it as the upgraded lid for the feeder, with better durability and better visibility than the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy glass\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA clear lid lets you check on the feeder without opening it, and glass keeps its clarity over the long run in chlorine service. It is a direct replacement, so it fits the PowerClean Ultra without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid and a new lid o-ring. Fit the fresh o-ring when you install the lid so the feeder seals properly from the start.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624939008212,"sku":"CTM-451-1007","price":33.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9b1c6b1e-990b-408d-aee0-8401383128c6.jpg?v=1788655900"},{"product_id":"1-2-chlorine-control-valve","title":"Pentair Rainbow 1\/2-Inch Control Valve for Automatic Chlorine\/Bromine Feeders","description":"\u003cp\u003eThe Pentair R172086Z is the genuine 1\/2 in. control valve for Rainbow automatic chlorine and bromine feeders. It fits models 320, 322 and 300-29X, and it is the same part that was previously numbered R172086.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe control valve regulates how much water flows through the feeder, which in turn sets how fast the tablets dissolve and how much chlorine or bromine goes to the pool. When the valve seizes, leaks at its threads or drifts off its setting, the feed rate becomes a guess. Swapping the valve puts the adjustment back under control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your feeder is a 320, 322 or 300-29X and that the connection is the 1\/2 in. thread. The related tubing, compression nut and elbow are separate parts if you are rebuilding the whole feed line.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624957980884,"sku":"RAI-451-4028","price":51.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_df3ad5fd-85ea-43c9-8bd2-7220e58ee2d0.jpg?v=1788656176"},{"product_id":"lock-ring","title":"Pentair Rainbow Lock Ring R172214","description":"\u003cp\u003eThe Pentair Rainbow R172214 is the locking ring that holds the lid on several pieces of Pentair equipment. It threads down over the lid to clamp it against the body and o-ring, and it is the part that gets cracked or stripped from years of opening and closing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair Rainbow HC-3315, HC-3330 and 3340 high capacity chemical feeders, Pentair Dynamic Series II cartridge filters, the Predator II inline cartridge filter and the Kreepy Krauly 179 leaf trap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA ring that will not seal is often a tired lid o-ring rather than the ring itself. The lid o-ring and lock spring are separate parts, and it is worth checking both before reassembling.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624971481300,"sku":"RAI-051-3475","price":26.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b89ceb55-6513-4716-acf9-a5f157fc2aff.jpg?v=1788657026"},{"product_id":"1-2-npt-x-tube-90-degree-elbow-w-nut","title":"Pentair 1\/2\" NPT x Tube 90 Degree Elbow with Nut","description":"\u003cp\u003eThe Pentair R172272 is the 90 degree elbow used on Rainbow 300-29X, 320 and 322 automatic chlorine and bromine feeders. One end is 1\/2 inch NPT; the other is a tube compression connection, and the nut is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe elbow turns the feeder tubing through a right angle where it meets the feeder body or the plumbing, so the tube can run cleanly without kinking. On an older feeder it is one of the fittings most likely to crack or weep, and a spare on the shelf saves a service call.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you are rebuilding the tubing run, the Rainbow compression nut and the short chlorinator tube are the pieces that go with it, along with the 1\/2 inch control valve.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625005789396,"sku":"RAI-451-4037","price":13.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ad212802-e287-4bbd-99b8-1cd548c16933.jpg?v=1788661937"},{"product_id":"short-chlorinator-tube-5-8-od","title":"Pentair Short Chlorinator Tube, 5\/8\" OD","description":"\u003cp\u003eThe Pentair R172091 is the short tube on the Rainbow 320 and 322 in-line automatic chemical feeders. It is 5\/8 in. outside diameter and is the genuine Pentair part, so it seats in the factory fittings without trimming or adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeeder tubing lives in concentrated chlorine or bromine and eventually hardens, discolors and cracks at the fittings. A weeping tube is the usual first sign. Swapping the tube is a few minutes of work and stops the leak before it reaches the pad or the feeder body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm you have a Rainbow 320 or 322 and that it is the short run you need. If the compression nut or support spring look tired, replace those alongside the tube so the new connection seals on the first try.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625021124820,"sku":"RAI-451-4029","price":14.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2b69dc21-5fb3-4e8e-81e0-9fdef9e950df.jpg?v=1788662397"},{"product_id":"pentair-521814-tubing-for-intellichem-chemical-controller-3-8-inch-x-20-ft-black","title":"Pentair Tubing for IntelliChem Chemical Controller, 3\/8 Inch x 20 Ft, Black","description":"\u003cp\u003ePentair 521814 is a 20 ft length of black 3\/8 in. tubing for the IntelliChem chemical controller. It is the genuine Pentair part and the standard replacement for the feed tubing on the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChemical feed tubing hardens and discolors over time and eventually cracks or weeps at the fittings. Replacing it with 521814 restores a sealed run so the controller doses as intended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGoes with\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair tube fittings and suction fittings for the IntelliChem and IntelliPH systems, sold separately.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625022828756,"sku":"PAC-451-1814","price":74.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PAC-451-1814_1a.png?v=1788662541"},{"product_id":"check-valve","title":"Pentair 1\/2\" Check Valve, Rainbow Automatic Feeder 320","description":"\u003cp\u003eThe Pentair R172248Z is the 1\/2 in. check valve for the Rainbow automatic chlorine feeder, Model 320. It is the genuine Pentair Rainbow part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a chlorinator needs a check valve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe water inside a tab feeder is far more aggressive than pool water. The check valve makes sure that water can only move one way, out toward the pool, and never back up the line toward the heater and the rest of the equipment. When the valve stops sealing, the damage tends to show up on the expensive parts upstream long before anyone suspects the feeder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTreat it as a wear part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConstant exposure to concentrated chlorine breaks down seats and weakens springs. Replacing the check valve during a routine feeder service is cheap next to what a backflow can cost.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625721606356,"sku":"RAI-451-4033","price":15.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0a1a13d-ae1e-4005-9c42-c308fed0ff8f.jpg?v=1788689922"},{"product_id":"bottom-o-ring-new-style","title":"Pentair Bottom O-Ring for Rainbow 320 and 322 Feeders, New Style","description":"\u003cp\u003eThe Pentair R172319 is the bottom o-ring, new style, for the Rainbow 320 and 322 automatic feeders. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bottom of a Rainbow feeder is under constant pressure and constant chemical exposure, and the o-ring at that joint is what keeps the water inside. Over a few seasons it hardens, takes a set, and eventually weeps. A slow drip at the base of the feeder almost always traces back to this ring rather than to the body or the fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the new style ring. On an older feeder, compare it against the seal you remove before you reassemble. A thin film of o-ring lubricant on the new ring helps it seat and slows the hardening, and it is worth replacing the ring any time the feeder is opened for other service.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625741889748,"sku":"RAI-451-4212","price":2.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3c7e526d-6144-47f3-92ae-3a6bbfb4f8d2.jpg?v=1788690459"},{"product_id":"cap-with-o-ring-for-5400-5430-5450-xl-pro-mineral-hybrid-in-ground-feeders","title":"King Technology Cap with O-Ring for 5400, 5430 and 5450 XL Pro and Mineral Hybrid In Ground Feeders","description":"\u003cp\u003eThis is the King Technology cap with o-ring, part 01-22-9417, for the 5400, 5430 and 5450 XL Pro and Mineral Hybrid in ground feeders. The cap and its o-ring are supplied together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they are sold as a pair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cap and the o-ring fail for the same reason and at roughly the same rate. Years of sun make the cap brittle at the threads while chemical exposure hardens the ring until it no longer seals. Replacing one and reusing the other tends to leave you back at the same leak, so the pair is the sensible repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt covers the in ground feeders in the 5400, 5430 and 5450 range, both XL Pro and Mineral Hybrid. Above ground feeders take a different cap, so check which system is at your equipment pad before ordering.\u003c\/p\u003e","brand":"King Technology","offers":[{"title":"Default Title","offer_id":48625742479572,"sku":"KTC-451-9417","price":38.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_854d3293-b45a-48f0-afaf-31cddac4baee.jpg?v=1788690493"},{"product_id":"lid-o-ring","title":"Hayward Cover O-Ring for CL200 Chlorinator","description":"\u003cp\u003eThe Hayward CLX200K is the cover o-ring for the CL200 chlorinator. The source also lists it against the CL220 and CL220BR chlorine feeders, and calls it both a cover o-ring and a lid o-ring for the same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn o-ring in a chlorine feeder sits in the harshest chemical environment on the equipment pad. Over time it flattens under the cover, hardens, and eventually splits. The first sign is usually water or gas weeping past the lid, or a cover that suddenly needs far more force to seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove out before the new o-ring goes in, and use a silicone based o-ring lubricant. That helps it seat evenly and keeps the cover from binding the next time the feeder needs refilling.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48625743331540,"sku":"HAY-451-4206","price":38.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cb541160-eb0a-4c60-8914-044be6326dcb.jpg?v=1788690584"},{"product_id":"pentair-521508-suction-fitting-for-intelliph-chemical-containers-black","title":"Pentair Suction Fitting for IntellipH Chemical Containers, Black","description":"\u003cp\u003ePentair 521508 is the genuine black suction fitting for IntellipH chemical containers. It sits on the tank and is the point where the system draws chemical out of the container.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it wears out\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inside of a chemical container is a hard place for plastic. Acid vapor works on the fitting continuously, and over time it hardens, crazes and eventually cracks. When that happens the system loses suction, dosing goes off, and chemical can weep out at the cap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntellipH uses more than one fitting on the container, and the easiest way to tell them apart is color. This is the black suction fitting. The vent fitting for the controller is gray and is a separate Pentair part, so check the color and the position on the tank before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625743790292,"sku":"PAC-451-1821","price":40.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5fce15d8-5a3b-4209-9d54-0133db740b4f.jpg?v=1788690645"},{"product_id":"r172255-screen","title":"Pentair Rainbow Screen for 320 and 322 Automatic Chlorinator","description":"\u003cp\u003eThe Pentair 210396Z is the inline chlorinator check valve screen for the Rainbow automatic feeder. It appears in the parts diagrams for the Rainbow 320 and the Rainbow 322, and is also listed under the number R172255.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the screen does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe screen sits in the check valve on the inline chlorinator. Its job is to keep debris out of the valve so the feeder can meter sanitizer at the rate the dial is set to. When it clogs or tears, feed rate goes unpredictable and the chlorinator gets blamed for a chemistry problem that is really a two dollar part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny time the feeder is open, look at the screen. Tablet dust and scale build on it, and once flow through the valve is restricted the whole feeder behaves differently. Replacing it alongside the lid o-ring is a sensible bit of routine chlorinator maintenance.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625746149588,"sku":"RAI-451-4034","price":7.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f1bff32e-74fc-4c6a-9bca-ee254547bb82.jpg?v=1788690888"},{"product_id":"cover-cap-assembly-includes-o-ring","title":"Hayward Cover and Cap Assembly, Includes O-Ring","description":"\u003cp\u003eThe Hayward CLX200CA is the cover and cap assembly for the CL200 chlorinator. It arrives complete: cover, cap, O-ring, and the cover screw with its washer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the whole assembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid on an inline chlorinator lives in the worst spot on the pad. It sits over concentrated chlorine, takes full sun, and gets opened and closed all season. The plastic crazes, the threads wear and the seal hardens, usually all at once. Replacing the assembly puts every one of those parts back to new rather than chasing one at a time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed for the CL200 and shown in the Hayward chlorine feeder parts covering the CL200, CL220 and CL220BR. Check the model on the feeder body before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep the O-ring seated in its groove and clean the sealing face on the feeder body before closing the lid. A pinched or gritty seal is the most common reason a fresh cover still weeps.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48625746837716,"sku":"HAY-451-7266","price":104.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_451a642a-2903-4bb1-8b2b-5cb5dbd02849.jpg?v=1788691303"},{"product_id":"lid-assembly","title":"Pentair Rainbow HC Series Chlorinator Lid Assembly","description":"\u003cp\u003eThe Pentair R172385D is the complete lid assembly for the Rainbow HC series high capacity automatic chemical feeders: the HC-3315, HC-3330 and HC-3340.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the lid is the part that fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA chemical feeder lid spends its life directly above concentrated chlorine tablets, under pressure, in full sun. Chlorine gas attacks the plastic from below and UV works on it from above. Threads seize, the plastic crazes, and eventually the lid will not seal no matter how hard it is tightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair supplies this as the complete lid assembly rather than as separate pieces, so the parts arrive matched to each other and to the feeder body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the feeder is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lock ring and the lid o-ring are separate Rainbow parts. If either looks tired, replace them during the same job. Shut the feeder down and relieve the pressure before opening it, and be ready for chlorine gas trapped under the lid.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625746968788,"sku":"RAI-051-4011","price":37.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1d7241e1-37ac-4daf-b91a-bda63c82232c.jpg?v=1788691316"},{"product_id":"1-4-chlorine-valve","title":"Pentair Chlorine Valve .25 in. Tube Control Valve with Compression Nut","description":"\u003cp\u003eThe Pentair Rainbow R172060Z is the control valve for Rainbow automatic chemical feeders, with a 1\/4 in. NPT connection on one side and a compression fitting on the tube side. The compression nut is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Rainbow feeder holds sanitizer solution and lets it bleed into the plumbing. The control valve is what sets the rate. Open it further and the pool gets more, close it down and it gets less, so this small valve is the whole adjustment on the feeder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich feeders\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eListed for the Rainbow 300, 302, 300-19 and 300-29 chemical feeders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart numbering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve appears as R172060Z in the catalog listing and as R172060 in the manufacturer description. Both point at this part, so do not be put off if your parts list shows the shorter number.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625767317716,"sku":"RAI-451-4208","price":32.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0e479330-21ce-4a35-8722-60ff1e331ae2.jpg?v=1788692007"},{"product_id":"powerclean-cover-o-ring","title":"CMP PowerClean Ultra\/Mini Lid O-Ring","description":"\u003cp\u003eThis is the genuine CMP lid o-ring for the PowerClean Ultra and PowerClean Mini in-line chlorinators, part number 26101-060-530.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring sits between the chlorinator lid and the body. It has to hold against system pressure with chlorine gas on the inside, which is a harder job than most pool seals face. When it hardens or flattens, water weeps from under the lid and chlorine odor collects around the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eShut down the pump and relieve pressure before opening the feeder. Clean the groove, fit the new ring, and coat it with a silicone based pool lubricant. Getting into the habit of checking the ring each time you add tabs is the simplest way to avoid a leak that starts mid season.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625772134612,"sku":"CTM-451-1008","price":18.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c70db515-59ab-4403-a79b-a62e432c4644.jpg?v=1788692052"},{"product_id":"5-8-o-d-18-tube","title":"Pentair 5\/8\" OD 18\" Chlorinator Feeder Tube","description":"\u003cp\u003eThe Pentair R172253Z is the 5\/8 in. outside diameter, 18 in. long feeder tube for the Rainbow Model 320 automatic chlorine and bromine feeder. It is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside the feeder, this tube carries water from the bottom of the chlorinator up to the top, where it is released down over the stack of tablets. That flow path is what dissolves the tablets at a controlled rate. If the tube is cracked or missing, water short circuits the tablet stack and the feeder stops dosing properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists both a short and a long 5\/8 in. tube for these feeders. This is the 18 in. version. Pull the old tube and measure it before ordering, since the two are otherwise identical in appearance.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625782227156,"sku":"RAI-451-4211","price":9.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_228d5129-9301-460c-9566-7825746577d2.jpg?v=1788692125"},{"product_id":"body-rainbow-automatic-feeder-320","title":"Pentair Rainbow Automatic Feeder 320, Body Only","description":"\u003cp\u003eThe Pentair R172321 is the replacement feeder body for the Rainbow model 320 in-line automatic chemical feeder. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe part that actually fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn in-line feeder holds tablets in a plastic vessel with sanitized water running through it. That is a hard life. The chlorine attacks from the inside, sunlight works on the outside, and after enough seasons the body crazes, goes brittle and starts to weep at the wall or around a fitting. There is no reliable repair for a cracked feeder body, so it is replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body alone. The threaded cap, the control valve and the internal components are each their own Pentair part number, so order those alongside if yours are past their best while the feeder is off the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGet the model right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis body is for the model 320. Rainbow made several feeder sizes and the bodies are not interchangeable, so check the model stamped on your feeder before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625789698260,"sku":"RAI-451-4043","price":58.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_89074332-8496-4858-bba9-5e6f8e83fa2a.jpg?v=1788700084"},{"product_id":"1-2slip-x-1-1-2npt-diverter-tee","title":"Pentair Rainbow Slip x Slip x 1-1\/2\" NPT Diverter Tee","description":"\u003cp\u003eThe Pentair R172317 is the diverter tee used in the plumbing around Rainbow chlorinator feeder models 320 and 322. The branch is 1-1\/2 inch NPT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA tab feeder does not sit in the main flow. The tee splits a share of the water off the line, pushes it through the feeder where it passes over the tablets, and the chlorinated water rejoins downstream. The tee is what makes that split possible, and a cracked or leaking one is a common reason a feeder starts weeping at the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size before you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe two catalog records we hold for this part do not agree on the slip run: one reads 2 inch slip by slip, the other reads 1\/2 inch slip. Both agree on the 1-1\/2 inch NPT branch. Measure the pipe on your own installation, or ask us to confirm against the parts diagram for your feeder model, before you buy.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626105614548,"sku":"RAI-451-4042","price":33.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_40771c04-c20f-4c29-a5d8-3af0242cca55.jpg?v=1788704858"},{"product_id":"3-8x-8-poly-chlorinator-tubing","title":"Pentair 3\/8\" x 8' Poly Chlorinator Tubing","description":"\u003cp\u003eThe Pentair R172023Z is the poly chlorinator tubing for Rainbow automatic chlorine and bromine pool and spa feeders, models 300 and 302. It measures 3\/8 in. on the outer diameter, 1\/4 in. on the inner diameter, and comes in an 8 ft. length.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe feed line spends its whole life in contact with concentrated feeder solution. That hardens the poly over a season or two until it cracks, usually right at a compression fitting where the tube is squeezed. A cracked line dribbles chemical onto the pad, which then goes to work on the concrete and on anything metal nearby.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCut the new tube square, and replace the compression nuts and any check valve in the line if they are as old as the tubing was. Getting the whole feed path fresh at once avoids a second leak a week later at the fitting you reused.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626114691284,"sku":"RAI-451-3007","price":14.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9c11d975-73a1-4bd9-8c40-327c2e961bd6.jpg?v=1788705019"},{"product_id":"tube-support-spring","title":"Pentair Rainbow Tube Support Spring","description":"\u003cp\u003eThe Pentair R171097 is the tube support spring for Rainbow automatic chlorinator feeders, models 320 and 322. It is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe spring lives inside the feed tube and keeps it round. Without it the tube softens with age and chemical exposure, then flattens under suction, and the feeder stops drawing at the rate the dial is set to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChlorine demand that will not come down, with a feeder that looks like it is working. Open the unit and check the tube. If it is kinked, flattened or has taken a permanent bend, replace the spring along with the tube.\u003c\/p\u003e\u003cp\u003eIt is a low cost part and easy to fit, so it is worth doing while the feeder is already apart for o-ring or tube service.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626117443796,"sku":"RAI-451-3004","price":14.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_852adb2b-4ef5-47a4-a81a-885ef61135aa.jpg?v=1788705045"},{"product_id":"compression-nut","title":"Pentair Rainbow Compression Nut","description":"\u003cp\u003eThe Pentair R172274 is the compression nut used on Rainbow automatic chemical feeders, sized for 1\/2 inch feed tubing. It is sold on its own, as the nut only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the nut does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe nut squeezes the ferrule down onto the tubing and holds the connection tight against feeder pressure. It takes the whole load of every time that joint is broken and remade, which is why it is usually the first piece of the connection to give up rather than the tube itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed for the Rainbow automatic feeder parts groups covering models 300-29X, 320 and 322. One source lists that same fit as 300-29X, 300 and 322, so if your feeder is a model 300 or a 320 and you want certainty, match the nut to the one you are removing before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth keeping spare\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese are inexpensive and small enough to disappear during a service call. Having one on the shelf saves a trip when a feeder connection starts to weep.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626222563540,"sku":"RAI-451-4038","price":6.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_79504d7e-1e4b-46ff-a01a-8eb01c0e5ef8.jpg?v=1788706493"},{"product_id":"cap-wrench","title":"Pentair Rainbow Chlorinator Cap Wrench","description":"\u003cp\u003eThe Pentair R172052 is the cap wrench for the Rainbow automatic chlorinator feeders. It is listed for models 300, 302, 300-19, 300-29, 300-29X, 320 and 322.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeeder lids are tightened by hand and then sit in the sun, in chlorine, for a season. When it is time to refill, the cap will not budge. The wrench fits the lid and lets you turn it evenly, which is the difference between opening the feeder and cracking it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth keeping on the shelf\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an inexpensive tool that is only ever needed at an inconvenient moment. If you run a Rainbow feeder, it belongs in the equipment cabinet next to the tablets. Clean the lid threads while the feeder is open and the next one will come off more easily.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626287345876,"sku":"RAI-451-4025","price":36.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_da6f3aa6-678a-4e6d-af15-10eafca948f8.jpg?v=1788707692"},{"product_id":"check-valve-pvc-inj-1-4-npt","title":"Rola-Chem Injection Check Valve, PVC, 1\/4\" NPT","description":"\u003cp\u003eThe Rola-Chem 521170 is a PVC injection check valve for peristaltic chemical metering pumps. It sits at the injection point where the feed line meets the plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA metering pump pushes small doses of chemical into a pressurised return line. When the pump stops, that pressure wants to go back the other way. The check valve is what stops it, keeping pool water and chemical out of the feed tube and out of the pump head. It is a small fitting doing a job that protects a much more expensive one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the connection before ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe supplied data describes this valve two different ways. The product title gives 1\/4 inch NPT; the detailed description gives 3\/8 inch barb by 1\/4 inch barb. We have listed both rather than choosing one for you. If the fitting size is critical, measure what is on the system now or get in touch and we will confirm.\u003c\/p\u003e","brand":"Rola-Chem","offers":[{"title":"Default Title","offer_id":48626288001236,"sku":"ROL-451-1170","price":40.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/521170.jpg?v=1788707710"},{"product_id":"parts-bag-for-chlorinator-300","title":"Pentair Parts Bag for Rainbow Chlorinator 300","description":"\u003cp\u003ePentair R172064 is the parts bag for the Rainbow offline chlorinator, covering models 300, 302, 300-19 and 300-29. It gathers the hookup and control hardware for the feeder into one package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bag holds the 172060 control valve with its compression nut, the 172061 combination check valve elbow, the 172034 saddle clamp, the 172032 tube fitting with compression nut, the 172033 gasket and 172036 silicone lubricant. Between them, those are the pieces that plumb the feeder into the return line and meter the flow through it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to reach for it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn offline feeder gets its hardest use at the fittings. Compression nuts get overtightened, gaskets take a set, the saddle clamp weeps, and a tired check valve elbow lets chlorinated water push back where it should not go. Rebuilding the connections one part at a time turns into several orders. This bag covers the set in one go, and the silicone lubricant is in there so the o-rings and compression fittings seat properly on reassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck your model first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis bag is for the 300, 302, 300-19 and 300-29. The commercial 300-29X takes a different feeder parts bag, so read the model number off the feeder body before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626391941332,"sku":"RAI-451-5791","price":54.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9b4c23de-39cb-45ad-b573-e6bf67785ae1.jpg?v=1788709735"},{"product_id":"elbow-check-valve","title":"Pentair Elbow Check Valve","description":"\u003cp\u003eThe Pentair R172061 is the elbow check valve for the Rainbow chemical feeders, models 300, 302, 300-19 and 300-29. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe check valve is built into an elbow, so it turns the line and controls the direction of flow in the same fitting. Flow goes one way and is blocked from coming back, which is what keeps feeder solution in the plumbing it belongs in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChemical feeders are a hard environment for small plastic parts. A check valve that is cracked, distorted or no longer seating should be changed, and since it is an inexpensive piece it is worth doing while the feeder is already open for other service.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626502729940,"sku":"RAI-451-4209","price":11.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1a9d4962-efa0-4f59-b164-7136985db751.jpg?v=1788711044"},{"product_id":"hc-series-control-valve","title":"Pentair Rainbow HC Series Control Valve","description":"\u003cp\u003eThe Pentair R172439 is the control valve for the Rainbow HC Series high capacity automatic chemical feeders, covering the HC-3315, HC-3330 and HC-3340. It is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe control valve meters the water routed through the feeder body. That flow is what erodes the tablets, so the valve setting is what actually decides how much sanitizer the feeder puts into the pool. When the valve seizes, cracks or leaks, you lose that control: the feeder either runs wide open regardless of the setting or stops feeding altogether.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a direct replacement for the original valve on an installed HC Series feeder. Shut the feeder down and relieve the pressure before you open it, and check the seals and the lid o-ring while the unit is apart, since they age at the same rate as the valve.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626569380052,"sku":"RAI-051-4016","price":84.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a0b62b4d-ac67-4f31-9d19-5b20906ffc97.png?v=1788712568"},{"product_id":"pentair-522513z-chemical-feeder-injection-check-valve","title":"Pentair Chemical Feeder Injection Check Valve","description":"\u003cp\u003ePentair 522513Z is the injection check valve for a Pentair chemical feeder. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe injection check valve is the fitting where the feeder puts chemical into the plumbing. The check function is the important half of that job: it lets the dose through into the line and stops pool water pushing back up the tubing toward the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck valves are consumables on a feeder. Acid and chlorine harden the internals over time, and a valve that sticks open backfeeds while one that sticks shut stops the dose entirely. If the feeder cycles but the chemistry never moves, this is one of the first parts to pull and look at.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626711593172,"sku":"PAC-451-0818","price":38.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a6ccca7e-1db0-46be-805c-2b79ca20d905.jpg?v=1788713955"},{"product_id":"check-valve-inlet-fitting-adapter-assembly","title":"Hayward CL Series Pool Chemical Feeder Check Valve and Inlet Fitting Adapter Assembly","description":"\u003cp\u003eThis is the Hayward CLX220EA, the check valve and inlet fitting adapter assembly for CL series chemical feeders. It is the genuine Hayward OEM part and it comes as one piece, valve and adapter together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt sits on the inlet side of the chlorinator, where water enters the feeder body. The check valve is what holds flow to a single direction, so treated water cannot travel back the way it came. When the valve stops sealing, or the inlet adapter is cracked or weeping, this assembly is the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward lists CLX220EA for the CL220 chlorinator, and the part belongs to the chlorine feeder parts group that spans the CL200, CL220 and CL220BR. If your feeder is a CL200 or CL220BR, check it against your parts diagram first.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48626718867668,"sku":"HAY-451-4049","price":26.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c1c0f59d-48bc-4ad6-9a2d-666c770728da.jpg?v=1788714025"},{"product_id":"1-2-x-short-mpt-nipple","title":"Pentair 1\/2 in. x Short MPT Nipple","description":"\u003cp\u003eThe Pentair R172256 is a 1\/2 in. short male pipe thread nipple, listed as a service part for the Rainbow automatic chlorine feeders in models 300-29X, 320 and 322.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA nipple is a short length of pipe threaded at both ends, used to join two female fittings. This one is the 1\/2 in. size in the short length used on those Rainbow feeders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChlorine feeder plumbing sits in about the harshest chemical environment on an equipment pad. Threads corrode, plastic goes brittle, and a fitting that sealed for years starts to weep. It is a low cost part to renew whenever the feeder is opened for service.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626730959060,"sku":"RAI-451-4035","price":9.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_20a59bfa-1d43-463d-8ae4-affa30b34528.jpg?v=1788714133"},{"product_id":"pentair-521514-shurflo-pump-head-for-intelliph-controller","title":"Pentair Shurflo Pump Head for IntellipH Controller","description":"\u003cp\u003eThe Pentair 521514 is the Shurflo pump head for the IntellipH controller. It is the genuine Pentair replacement part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntellipH manages pool pH by feeding acid on a controlled schedule. The Shurflo pump head is the wet end that actually moves the chemical. This listing covers the head alone, not a complete controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeed pump heads handle aggressive chemical continuously and wear from the inside out. If the controller is powering up and calling for a feed but the acid level in the tank is not dropping, the pump head is the natural place to look before suspecting the controller itself.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626853609684,"sku":"PAC-451-0811","price":238.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b71c4aff-5d27-46da-b3d5-7a904934c98e.png?v=1788715869"},{"product_id":"pentair-521512-clamp-saddle-2-inch-iph-replacement","title":"Pentair Clamp Saddle, 2 Inch, IntellipH Replacement","description":"\u003cp\u003eThe Pentair 521512 is the saddle clamp kit for the IntellipH control system, sized for 2 inch pipe. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a saddle does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA saddle clamps around the pipe and gives the system a fixed, sealed point to work from without cutting the line apart. On an IntellipH installation it is the hardware that ties the system to the plumbing at the equipment pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the pipe size. This kit is the 2 inch version, and a saddle sized for other pipe will not seal correctly. This listing covers the saddle clamp kit itself; the rest of the IntellipH components are ordered separately.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626858000596,"sku":"PAC-451-1826","price":56.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PAC-451-1826_1a.png?v=1788715896"},{"product_id":"drain-vent-valve","title":"Pentair Rainbow Drain Vent Valve, Black","description":"\u003cp\u003eThe Pentair Rainbow R172224X is the black drain and vent valve used on Rainbow equipment. It handles two jobs, bleeding trapped air out of the housing and draining it when the unit is opened for service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRainbow lists it for the Dynamic Series cartridge filters and for the High Capacity HC Series chemical feeders, which covers the HC-3315, HC-3330 and HC-3340 chlorinator models. Worth checking your parts diagram against the valve you are holding before ordering, since the two product families share it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVent valves are a routine wear item. Once the threads or the seal give up, the valve weeps whenever the system is under pressure. The o-ring for the Dynamic Series drain and vent valve is a separate part, so replace both if the old one has taken a set.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626993496276,"sku":"RAI-051-3480","price":10.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_37677717-68cd-4070-a2d4-3e50e6fe430b.jpg?v=1788718852"},{"product_id":"pentair-522384-black-tubing-with-labels","title":"Pentair Black Tubing with Labels for IntellipH","description":"\u003cp\u003ePentair 522384 is the black chemical injection tubing used with IntellipH controllers. It is supplied in a 1\/4 inch size, ten feet long, and comes with labels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it gets replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTubing that carries pool chemical does not last forever. It stiffens, discolors and eventually cracks, and a line that has split will not deliver a measured dose no matter how well the controller is set up. Running a fresh length is quick work and puts the feed back to where it started.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTen feet of 1\/4 inch black tubing with the labels, the genuine Pentair part rather than a generic tube cut to length.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627182436564,"sku":"PAC-451-1818","price":102.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/522384_pentairtubing.jpg?v=1788719936"},{"product_id":"hayward-3-x-7-31-68-gpd-santoprene-feed-tube-cax-3512","title":"Hayward 3\" x 7\" 31.68 GPD Santoprene Feed Tube","description":"\u003cp\u003eHayward CAX-3512 is the Santoprene feed tube for the Hayward liquid chlorine feeder system. It measures 3 inches by 7 inches and is rated at 31.68 gallons per day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the tube is the part that fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA peristaltic feeder works by squeezing a flexible tube. That is a good arrangement, because the chemical never touches the pump mechanism, but it means the tube absorbs all the wear. Over time the walls thin, the tube loses its spring and the output drops off even though the pump sounds exactly the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRate follows the tube\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe feed rate is a function of tube size and material, not the pump alone. CAX-3512 is the 31.68 GPD tube, so ordering by part number keeps the system dosing at the rate it was commissioned for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeep a spare\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA tube in the cabinet turns a failed feeder into a short swap instead of a day of hand dosing.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627218219220,"sku":"HAY-451-2047","price":33.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_90120b69-6065-4724-9c1e-e5119f4012f1.jpg?v=1788720154"},{"product_id":"pentair-chemical-container-lid-o-ring-521507-5-pack","title":"Pentair Chemical Container Lid O-Ring, 5 Pack","description":"\u003cp\u003eThe Pentair 521507 is the o-ring for the chemical container lid, supplied five to a pack. It is the genuine Pentair replacement seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is a consumable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn o-ring that lives in contact with pool chemicals does not age the way a plain water seal does. It hardens, loses its spring and eventually cracks, and once that happens the lid no longer pulls down tight. Treating it as a scheduled replacement is easier than chasing a weeping lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe five pack\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFive rings in one order suits a service tech carrying spares or a site running more than one container. Fitting a fresh ring at each service is quick and takes the seal out of the list of things that can go wrong.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627586662612,"sku":"PAC-451-0812","price":90.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_952a25f9-4f77-4906-8744-5c8195a8f8c1.jpg?v=1788723952"},{"product_id":"powerclean-ultra-mini","title":"CMP PowerClean Ultra\/Mini Chlorinator Cover Assembly, White","description":"\u003cp\u003eThe CMP 25280-100-200 is the white cover assembly for the PowerClean Ultra and PowerClean Mini chlorine feeders. It is the genuine CMP part, supplied as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the cover matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a plumbed in feeder, the cover is a pressure boundary. It has to seal against the feeder body every time the pump runs, with chlorine gas on the inside and direct sun on the outside. That combination is hard on plastic, and the lid is normally the first part of the feeder to go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSigns it needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater seeping from the rim when the pump is running, a lid that will not seat down evenly, hairline cracks around the threads, or chalky brittle plastic all point to a cover that is finished. Replacing it is far quicker than replacing the whole feeder.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627632373972,"sku":"CTM-451-1003","price":32.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b11860ef-f556-4e6f-a003-24f543b26da5.jpg?v=1788725627"},{"product_id":"compression-nut-cl-series","title":"Hayward Compression Nut, CL Series","description":"\u003cp\u003eThe Hayward CLX220H is the compression nut for the CL series chlorine feeders. It is the genuine Hayward part, the same one fitted at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich feeder\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward describe this nut as the replacement for the CL200 and CL220 series chlorinators, and the CL220BR is grouped with them. It is also carried in the Hayward parts listings for the CL100 and CL110 feeders, so if you are working on one of those, check it against your parts diagram before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA chlorinator lives in the most aggressive corner of the equipment pad. Plastic threaded parts on a feeder go brittle over the years, and a nut that has cracked or lost its thread will not pull the connection up tight no matter how hard you turn it. Replacing it is a few minutes of work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover o-ring and the cover and cap assembly are the other CL series parts that wear at about the same rate. Hayward sell them separately.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627639353556,"sku":"HAY-451-6074","price":4.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9f08dfb0-7f49-491f-a286-e29e70a9dce1.jpg?v=1788725731"},{"product_id":"8-chlorinator-tubing","title":"Hayward 8' Chlorinator Tubing","description":"\u003cp\u003eHayward CLX220J is the genuine 8 ft replacement tubing for Hayward chlorine feeders, listed for the CL100, CL110, CL200, CL220 and CL220BR.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn off line chlorinator sits beside the plumbing rather than in it. Water is taken from the return line, passes through the feeder where it picks up chlorine, and goes back to the plumbing. This tubing is that path. Everything the feeder does depends on the tubing carrying flow reliably in both directions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it wears out\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tubing carries the most concentrated chlorine anywhere in the system. It stiffens, discolors and eventually cracks, usually at the bends or right at a fitting. A split line leaks chlorinated water into the equipment pad and starves the feeder of flow at the same time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYou get eight feet, which is meant to be cut to the run your equipment pad needs. Trim it to length rather than leaving a coil of excess, and check the saddle fittings while you are there, since they are a separate part and age alongside the tubing.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627690930388,"sku":"HAY-451-5655","price":21.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_72874975-c182-43da-a8a8-a75bf8c237b6.jpg?v=1788726675"},{"product_id":"cover","title":"Hayward Chemical Feeder Cover for CL200 and CL220","description":"\u003cp\u003eHayward CLX200B is the replacement cover for the CL200, CL220 and CL220BR chlorine feeders. It is the genuine Hayward part, and Hayward also describes it as the feeder inner cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy covers fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA feeder cover sits directly over a stack of tablets and takes chemical exposure every hour the system runs. Plastic that is held in that environment goes brittle, crazes and eventually cracks. Once it has cracked the feeder will not seal, and you get leaks and gas escaping at the lid rather than sanitizer going into the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the cover on its own. The cover o-ring, the cap assembly and the cover screw with washer are all separate part numbers, so check which pieces of your feeder lid are actually worn before you order.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627703251156,"sku":"HAY-451-4044","price":31.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a534b485-ea56-44d0-a75a-3424d3f5691a.jpg?v=1788726807"},{"product_id":"hayward-cax-3511-injection-check-valve","title":"Hayward CAX-3511 Injection Check Valve","description":"\u003cp\u003eThe Hayward CAX-3511 is the Next Generation injection check valve, 1\/4 inch, with a polypropylene body. It is the genuine Hayward part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn injection check valve is the one way door where chemical enters the plumbing. It lets the feed line push product into the flowing water and it stops that water, at system pressure, from traveling back up the small tubing toward the feeder or the pump. If it stops sealing, pool water gets into places that were never meant to see it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService life\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis valve sits at the point of highest chemical concentration anywhere on the system, so it wears. Treat it as a scheduled replacement during routine service and it will not be the part that shuts a system down unexpectedly.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627759349972,"sku":"HAY-451-2048","price":55.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/cax3511_injection_checkvalve.jpg?v=1788727783"},{"product_id":"1-2-drain-valve","title":"Pentair 1\/2\" Drain Valve for Rainbow Chlorinators","description":"\u003cp\u003ePentair R175009 is the 1\/2 inch drain valve for the Rainbow chlorinator feeders, models HC-3315, HC-3330 and 3340. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat changed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese feeders originally shipped with a faucet style valve operated by a T handle. That older design has been discontinued and this valve is what took its place, so if you are looking at a T handle on your feeder and cannot find a match, this is the current part number to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe drain valve is the only clean way to get water out of the feeder before you open it up. When it seizes, weeps or snaps off, servicing the chlorinator turns into a mess, and replacing a small valve is far quicker than fighting a stuck one every season.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627760660692,"sku":"RAI-451-4224","price":23.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ae309f69-73c0-4e55-b0b7-499c37437cff.jpg?v=1788727809"},{"product_id":"flex-tube-w-clamp-8","title":"Rola-Chem 8\" Tygon Pinch Tube Assembly with Clamp for RC301 Peristaltic Pump","description":"\u003cp\u003eRola-Chem 523250 is the eight inch Tygon pinch tube assembly, complete with its clamp, for the RC301 peristaltic chemical feed pump. It is the genuine part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow a peristaltic pump works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere is no impeller and no seal touching the chemical. A rotor squeezes a flexible tube against the pump head and pushes the liquid along inside it. That is what makes these pumps tolerant of aggressive chemistry, and it is also why the tube is the part that wears out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is a scheduled item\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tube is compressed and released thousands of times an hour. Eventually it takes a set, loses its recovery, and then splits. When that happens the pump keeps running and sounds completely normal while no chemical reaches the pool, which is the failure that costs people a week of bad water before anyone checks the feeder. Change the tube on a schedule instead of waiting for it.\u003c\/p\u003e","brand":"Rola-Chem","offers":[{"title":"Default Title","offer_id":48627842253012,"sku":"ROL-451-6084","price":21.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_24ac94ae-0c47-4eed-bdb9-46826dca0738.jpg?v=1788728117"},{"product_id":"parts-bag-300-29x","title":"Pentair 300-29X Feeder Parts Bag","description":"\u003cp\u003eThe Pentair R172275 is the parts bag for the model 300-29X automatic chemical feeder, the commercial off-line chlorinator in the Rainbow range. It is the genuine Pentair service pack for that feeder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the parts come as a bag\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA chemical feeder is rebuilt rather than repaired one piece at a time. Pentair groups the service parts for the 300-29X under a single number so the whole job can be done in one visit instead of ordering pieces as each one turns up worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the model first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeeder parts do not cross between models. This bag is listed specifically for the 300-29X, so read the label on the feeder body before ordering. The 320 and 322 chlorinators use their own screens, check valves and seals.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627849396436,"sku":"RAI-451-7093","price":102.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_76dd50a2-db41-4c0a-b140-03908860e6cf.png?v=1788728273"},{"product_id":"pentair-522446-chem-kit-tube-100-ft-with-labels","title":"Pentair Chem Kit Tube 100 ft with Labels","description":"\u003cp\u003ePentair 522446 is the chemical injection tubing kit for IntellipH controllers: 1\/4 in. black tubing in a 100 ft length, supplied with labels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn IntellipH system doses acid into the return line to hold pH. The tubing is the path from the chemical tank through the pump to the injection fitting. It is the part of the system that sits in contact with chemical the whole time it is in service, and it is a consumable, not a permanent fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLength and labels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 100 ft roll covers a long run from the tank to the injection point and leaves plenty for future replacements. The labels that come with it identify the chemical line at each end, which matters on an equipment pad where several tubes and pipes run side by side.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627860668628,"sku":"PAC-451-1817","price":235.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c75ff163-8361-4a56-8326-cd37b541f1b0.jpg?v=1788728519"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/chlorinator-feeder-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}