{"title":"CMP Parts","description":"\u003cp\u003eCMP parts at Active Pool Supply, genuine OEM and quality aftermarket.\u003c\/p\u003e","products":[{"product_id":"pool-light-adapter-repair-ring","title":"CMP Pool Light Adapter Repair Ring","description":"\u003cp\u003eThe CMP Pool Light Adapter Repair Ring is a stainless steel frame that retrofits into an existing pool light niche to replace a stripped or broken light mount. Instead of chipping out and replacing the niche, you anchor this ring to its inside wall and screw the light to the ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it mounts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree allen screws clamp the ring against the inside of the niche. A new bonding lug is part of the ring, so the bonding connection to the light is restored with the same install. The ring is built to detach, which lets you fit it around the light cord and complete the job with the light still in the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring measures 10.5 in. in diameter and is intended for standard inground pool light niches. For spa niches, CMP offers a smaller spa light repair ring.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624875274452,"sku":"CTM-301-1006","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8e08ff9b-0b15-42d7-9318-cb0f261b60d7.jpg?v=1788648404"},{"product_id":"pump-union-cpvc-1-1-2-slip-by-male-thread-with-o-ring","title":"CMP Pump Union CPVC 1-1\/2\" Slip by Male Thread with O-Ring","description":"\u003cp\u003eThe CMP 21063-154-000 is a 1-1\/2 in. CPVC pump union with a slip socket on one side and a male threaded end with o-ring on the other. It is the fitting that lets a pool pump be unbolted from the plumbing for service instead of being cut out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it connects\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe slip end solvent welds onto 1-1\/2 in. pipe. The male threaded end screws into the pump housing. The union nut in the middle draws the two halves together on an o-ring, which means the joint can be opened and closed as often as needed without a new gasket each time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CPVC\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCPVC handles warmer water than standard PVC, so this union is a sensible choice on the pump side of a heater loop or anywhere the plumbing sees heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 1-1\/2 in. slip version. If your suction or return side is plumbed in 2 in. pipe, CMP also makes a 1-1\/2 in. thread by 2 in. slip hi-temp union, part 21063-160-000.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624877502676,"sku":"SPG-56-0012","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_763d0994-baac-4337-be26-abdd0544e397.jpg?v=1788648550"},{"product_id":"pump-union-threaded-2-mpt-x-2-slip-cpvc","title":"CMP Pump Union, Threaded 2\" MPT x 2\" Slip, CPVC","description":"\u003cp\u003eThis CMP union puts a detachable joint between your pool pump and the plumbing. One end is 2 in. male pipe thread that screws into the pump port, the other is a 2 in. slip socket that glues onto the pipe. When the pump needs to come off, back off the union nut and lift it out. Nothing gets cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CPVC matters here\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump unions live next to the hottest part of the system. If a pump runs dry or overheats, an ordinary PVC union can shrink and open a suction leak that is hard to find. This union is molded from heat tolerant CPVC, which holds its shape through that kind of abuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCMP sizes it for Pentair WhisperFlo, IntelliFlo and Challenger pumps, and it works on any pump with a 2 in. female threaded port. It is sold individually, so order two to union both the suction and discharge sides.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624879435988,"sku":"CTM-56-2001","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a6e9a8aa-f71b-41d9-90a4-f7c916beeec1.jpg?v=1788648718"},{"product_id":"heavy-duty-flowskim-skimmer-basket-sp1082-12-handle","title":"CMP FlowSkim HD Skimmer Basket with 12\" Handle for Hayward SP-1082 Skimmers","description":"\u003cp\u003eThe CMP 27182-352-000 is a heavy duty FlowSkim skimmer basket built to replace the SP1082CA basket in Hayward SP-1082 skimmers. It measures 7 in. across the top, 6-1\/2 in. across the bottom and 5 in. tall, and it carries a 12 inch FlowSkim handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe handle is the point\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard skimmer basket has to be fished out of the throat by hand, which means reaching into the water and into whatever the basket has caught. The FlowSkim handle stands up above the basket so you take hold of it from the deck, lift, dump and drop it back. Emptying the skimmer turns into a few seconds' work you do not have to think about.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy duty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket itself is CMP's thicker heavy duty version, made to survive years of lifting, knocking out against a bin and sitting in the sun. It does the same job as the original, catching leaves and grit before they reach the pump, and it does it for longer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for the Hayward SP-1082 skimmer. Measure your old basket if you are unsure: about 7 in. across the top and 5 in. tall means this is the one.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624922296532,"sku":"CTM-251-3011","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_48551c97-5eab-4122-b798-69eec83e0db4.jpg?v=1788653614"},{"product_id":"generic-bottom-collector-manifold-cx3000c","title":"CMP Generic Bottom Collector Manifold for Hayward CX3000C","description":"\u003cp\u003eThe CMP 25357-750-000 is an aftermarket bottom collector manifold made to replace the Hayward CX3000C in SwimClear and SuperStar Clear cartridge filters. The manifold sits in the base of the tank, locates the four filter cartridges and collects the filtered water on its way to the outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach of the four cartridges seats on the manifold, which is why a cracked or warped manifold shows up as dirt bypassing the filter or cartridges that will not sit square. The internal air bleed is molded in, so air that collects under the lid can escape as the original design intended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm CX3000C is the bottom manifold listed for your filter model before ordering. With the tank open it is worth checking the bulkhead and tank o-rings and replacing any that have flattened, since they are the usual source of leaks after a reassembly.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624922591444,"sku":"CTM-051-8256","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a7169ab0-d43e-4203-8bf7-b294a5a314fc.png?v=1788653650"},{"product_id":"sweep-hose-tail-scrubber-5-pack","title":"CMP Sweep Hose Tail Scrubber (5 Pack)","description":"\u003cp\u003eThe CMP 25563-300-500 is a five pack of foam tail scrubbers for the sweep hose on Polaris pressure side cleaners. It is the CMP replacement for the Polaris 9-100-3105 scrubber, sold in quantity so you have spares on hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the scrubber does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sweep hose tail whips across the wall and floor behind the cleaner, and the foam scrubber on its tip is what actually scrubs the surface. It also cushions the hose end so it does not slap bare plastic against the liner or plaster. When the foam wears thin or falls off, the tail stops cleaning and starts scuffing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the sweep hoses on the Polaris 180, 280, 360, 380, 480 Pro and 3900. Replacement is a slip on job: pull the old scrubber off the tail and push the new one on.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624924393684,"sku":"25563-300-500","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_32be0ce3-df89-4d75-8292-625c3b993537.jpg?v=1788653709"},{"product_id":"clear-glass-powerclean-chlorinator-cover","title":"CMP Clear Glass PowerClean Chlorinator Cover","description":"\u003cp\u003eThe CMP 25280-109-200 is the clear glass replacement lid for the PowerClean Ultra chlorinator, supplied with a new lid o-ring. CMP offers it as the upgraded lid for the feeder, with better durability and better visibility than the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy glass\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA clear lid lets you check on the feeder without opening it, and glass keeps its clarity over the long run in chlorine service. It is a direct replacement, so it fits the PowerClean Ultra without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid and a new lid o-ring. Fit the fresh o-ring when you install the lid so the feeder seals properly from the start.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624939008212,"sku":"CTM-451-1007","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9b1c6b1e-990b-408d-aee0-8401383128c6.jpg?v=1788655900"},{"product_id":"cmp-25503-460-000-bw-4-bubbler-body-assembly-gunite","title":"CMP Brilliant Wonders 4\" Bubbler Body Assembly Gunite","description":"\u003cp\u003eThe CMP 25503-460-000 is the Brilliant Wonders 4 in. LED bubbler body assembly for gunite pools, in white. It is the in floor housing and water flume hardware that the bubbler system is built on, made for sun shelves, beach entries and shallow lounging areas where a low, flush water feature suits the space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation and adjustment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body installs flush with the pool floor, so the hardware stays out of sight and only the bubbling column shows. An adjustable directional nozzle is included for aiming the flume, useful on sloped beach entries, and nozzle reducers let you dial the flow in for the height and effect you want.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdding light\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body accepts the Brilliant Wonders 1.5 in. LED light module, which is sold separately and provides RGBW color with beam focusing lenses and Smart Sync. With the light installed, its IP68 quick disconnect cord system lets you service the light without pulling long lengths of cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the gunite version and does not include the light. Fiberglass and vinyl versions of the 4 in. body, in several trim ring colors, are separate parts.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624965910740,"sku":"CTM-271-1008","price":123.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_91262a29-5734-47e5-b4ea-a495e138b1a6.jpg?v=1788656800"},{"product_id":"b-9-skimmer-basket","title":"CMP Pool Skimmer Basket, Replaces Hayward SP1070-E","description":"\u003cp\u003eThe CMP 27180-009-000 is a B-9 size skimmer basket, the common size shared by several skimmers from different manufacturers. It replaces the Hayward SPX1070E basket in the SP1070 Skim Master series, the Pentair Bermuda basket 516112 and the Sta-Rite U3 basket 08650-000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBaskets look alike and fit differently, so measure before ordering. This one is 8-5\/16 in. across the top rim, 5-3\/4 in. across the bottom and 5-3\/16 in. tall. If your old basket matches those numbers, this one drops onto the same ledge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cracked or missing basket lets leaves and debris straight into the pump strainer, and a basket with a split rim can jam in the throat. A spare on the shelf is cheap insurance.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624967680212,"sku":"SPG-601-0009","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d00788ea-76fd-4e8b-8f82-647112977bc6.jpg?v=1788656855"},{"product_id":"eyeball-jet-cap","title":"CMP Pool Eyeball Jet Cap Cover","description":"\u003cp\u003eThe CMP 25552-020-300 is a white threaded cap that takes the place of the eyeball on a pool return fitting. It threads onto most common 1-1\/2 in. MIP directional flow outlets, which covers the standard eyeball returns from Hayward, Pentair, CMP and Polaris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnthread the locking ring from the existing eyeball, remove the eyeball, and thread the cap onto the fitting. No tools are called for beyond what it takes to loosen the ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost pools use it at closing time, sealing each return line as part of winterizing. It also works as a service cap for shutting off one return while the rest of the system runs.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625020076244,"sku":"CTM-25-2082","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1b604032-3b74-460e-ae3f-e47abb5ffc7d.jpg?v=1788662247"},{"product_id":"cmp-powerclean-salt-cell-540-40k-gallons-52000-240-110","title":"CMP PowerClean Salt Cell 540, 40K Gallons","description":"\u003cp\u003eThis is the CMP PowerClean Salt Cell 540, part number 52000-240-110, rated for pools up to 40,000 gallons. It is the replacement cell for an installed PowerClean 540 system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy cells get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA salt cell is a wear part. The coated plates inside it convert salt into chlorine, and that coating is used up over years of running. When output drops and cleaning the plates no longer helps, the cell has reached the end of its life and a new one restores the sanitizer the pool needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the gallon rating on the cell you are removing. This listing is the 40K version, and the rating should match what the system was sized for.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625710563540,"sku":"CTM-45-4022","price":897.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CMP52000240110.jpg?v=1788688899"},{"product_id":"pool-defender-2-compact-sacrificial-zinc-anode","title":"CMP Pool Defender 2 in. Compact Sacrificial Zinc Anode","description":"\u003cp\u003eThe CMP 25810-400-050 is the compact version of the Pool Defender, an inline sacrificial zinc anode that plumbs into 2 in. pipe. It ships with 4 ft of solid copper ground wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe problem it solves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pool carries electrical current from several sources, and that current keeps flowing even when the pump is off. In salt water it is stronger still. Left alone it eats away at heaters, rails, fittings and anything else metal in the system. Building codes now expect that current to be controlled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eZinc gives the current an easier path than your expensive metal components, so the anode corrodes and they do not. Bonded correctly, the inline Pool Defender helps protect the whole pool from galvanic corrosion, and the compact body fits in tighter equipment pads than a full size anode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the zinc as part of normal maintenance and replace it once about half of it has eroded, which typically works out to every three years or so. The replacement is inexpensive compared with the parts it protects.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625712627924,"sku":"CTM-301-1008","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_53d6eae3-66d8-4cf0-965d-066e94757be7.jpg?v=1788689147"},{"product_id":"pool-skimmer-basket-handle-attachment-12-flowskim","title":"CMP FlowSkim Pool Skimmer Basket Handle Attachment, 12 in.","description":"\u003cp\u003eThe CMP FlowSkim basket handle attachment, part 25573-300-000, adds a 12 in. handle to a skimmer basket that did not come with one. It makes emptying the basket cleaner, faster and easier, because you lift and dump instead of reaching down into the skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe flow through design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle is more than a grab point. Water travels down the center of it, so when the basket packs solid with leaves the pump still gets water. That is the difference between a skimmer that chokes off and a pump that keeps its prime, and running dry is what wrecks pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe FlowSkim handle works with most skimmer baskets that stand at least about 5 in. tall. Measure your basket before ordering. The handle is sold on its own, to fit into a basket you already have.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625722163412,"sku":"CTM-251-0505","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_355ee840-8444-4b49-87e5-76d77dc659e5.jpg?v=1788689982"},{"product_id":"generic-top-manifold-assembly-built-in-air-relief-dex2400c","title":"CMP Generic Top Manifold Assembly with Built-in Air Relief, DEX2400C","description":"\u003cp\u003eThis is a CMP generic top manifold assembly for the Hayward Pro-Grid and Micro-Clear DE filters, replacing the Hayward DEX2400C. The air relief is built into the top of the manifold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the manifold does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe top manifold is the header the DE grids plug into. Water passes through the grids, into the manifold ports and out to the pool. If the manifold cracks, or a grid port loses its seal, unfiltered water and loose DE take the short route back to the returns. That is what people are seeing when DE keeps coming out of the returns despite new grids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric, not Hayward\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an aftermarket part made by CMP. It may vary in appearance from the Hayward original while matching it for fit and function. It is listed for the Pro-Grid DE2420, DE3620, DE4820 and DE7220 filters.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625743266004,"sku":"CTM-051-1709","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b0992c87-3509-4384-b215-681963ea9eb7.jpg?v=1788690577"},{"product_id":"flowskim-basket-and-handle-sp1070e-u3","title":"CMP FlowSkim Basket and Handle SP1070E, U3","description":"\u003cp\u003eThe CMP 27182-300-000 is the FlowSkim skimmer basket with an integrated handle, a replacement for the Hayward SPX1070E basket used in SP1070E and U3 skimmers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe handle does two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt gives you something to grab, so the basket lifts straight out and tips over cleanly instead of being fished at with fingertips. It is also hollow and set at an angle, which gives water a path through the middle of the basket once leaves have packed the sides. That keeps flow up to the pump when the basket is full rather than choking it off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e8 in. across the top, 6-1\/2 in. across the bottom and 5-3\/8 in. high. Measure the basket you are taking out if you are unsure which skimmer body you have.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625747362004,"sku":"CTM-251-0504","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a9f1a4e0-dbfe-4be4-9030-2bf032ee1c57.jpg?v=1788691376"},{"product_id":"powerclean-cover-o-ring","title":"CMP PowerClean Ultra\/Mini Lid O-Ring","description":"\u003cp\u003eThis is the genuine CMP lid o-ring for the PowerClean Ultra and PowerClean Mini in-line chlorinators, part number 26101-060-530.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring sits between the chlorinator lid and the body. It has to hold against system pressure with chlorine gas on the inside, which is a harder job than most pool seals face. When it hardens or flattens, water weeps from under the lid and chlorine odor collects around the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eShut down the pump and relieve pressure before opening the feeder. Clean the groove, fit the new ring, and coat it with a silicone based pool lubricant. Getting into the habit of checking the ring each time you add tabs is the simplest way to avoid a leak that starts mid season.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625772134612,"sku":"CTM-451-1008","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c70db515-59ab-4403-a79b-a62e432c4644.jpg?v=1788692052"},{"product_id":"fns-plus-top-manifold-assembly","title":"CMP FNS Plus Top Manifold Assembly","description":"\u003cp\u003eThe CMP 25357-600-000 is a heavy duty top manifold assembly for Pentair FNS Plus DE swimming pool filters. It is a CMP built replacement for the OEM manifold, part number 59023700, and is also cross referenced as 192173.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the top manifold does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn an FNS Plus, the DE grids hang from the top manifold and all the filtered water leaves the tank through it. When the manifold cracks or the grid ports wear, DE gets past the grids and back into the pool, and the filter never quite clears the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the manifold assembly on its own. Grids, the standpipe and the clamp hardware are separate parts, so open the tank and check the grids while the manifold is out. If they are torn or thin, replacing them at the same time saves a second teardown.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625791008980,"sku":"CTM-051-1253","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4f451cea-38ce-44c7-b119-caac49439c88.jpg?v=1788700168"},{"product_id":"cmp-25357-850-000-heavy-duty-j-style-top-manifold-for-cv340-cv460-cv580-cl340-cl460-cl580-cartridge-filters-4-box","title":"CMP Heavy Duty J-Style Top Manifold for CV340, CV460, CV580, CL340, CL460, CL580 Cartridge Filters","description":"\u003cp\u003eThe CMP 25357-850-000 is a heavy duty J-style top manifold for the CV340, CV460, CV580, CL340, CL460 and CL580 cartridge filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the top manifold does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt caps the cartridge assembly and holds every element in its correct position against the flow. All the water that leaves the filter passes through it, and it takes the mechanical load of the cartridges pressing up under pressure every time the pump starts. That combination is why manifolds crack and distort with age.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe heavy duty version\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the heavier specification part in the J-style pattern, which is the sensible choice when the one you are pulling out has already failed once. It goes back in the same place as the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a bad manifold\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCartridges that sit crooked or will not seat, water that turns cloudy again days after a filter clean, and visible cracks around the ports when the lid comes off. Any of those means the manifold is letting dirty water past the elements rather than through them.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626224726228,"sku":"CTM-051-5030","price":98.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_85da511a-e222-4df2-809c-b5ac90d4d00f.jpg?v=1788706538"},{"product_id":"skimmer-basket","title":"CMP Kafko\/Equator Skimmer Basket","description":"\u003cp\u003eThe CMP 27180-163-000 is a replacement skimmer basket for Kafko and Equator skimmers, made to fit in place of the Kafko 19-0163-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIdentifying your basket\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe quickest check is the top rim. The basket this part replaces normally carries the number 1006 molded into the rim, so lift yours out and look before ordering. The body measures 6-1\/2 inches tall with 6-3\/4 inches across one end and 7-1\/2 inches across the other. Our sources disagree on which of those measurements is the top and which is the bottom, so measure both ends of the old basket and match the pair rather than a single figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy not run without one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket is the last barrier before the pump. When it cracks or the rim breaks away, leaves pass straight through, and what would have been a basket change turns into a clogged impeller, a lost prime or a burnt out seal. Baskets are the cheapest part in the entire circulation loop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLife expectancy\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSun and cold both work on a skimmer basket. Most crack at the rim or at the handle first, and by then the plastic is brittle everywhere. If yours has gone that way, replace it rather than nursing it through another season.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626224857300,"sku":"CTM-251-3018","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_76c91bea-7a5b-476f-b001-510d697dc950.jpg?v=1788706543"},{"product_id":"cmp-powerclean-salt-ultra-winterizing-cell-cap-kit-52000-120-12","title":"CMP PowerClean Salt Ultra Winterizing Cell Cap Kit","description":"\u003cp\u003eThis is the CMP winterizing cell cap kit for the PowerClean Salt Ultra. It caps the cell housing when the salt cell is pulled and the system is closed for the season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAt closing, the cell comes out and the housing has to be sealed rather than left open through the winter. This kit is the factory way to do that on a PowerClean Salt Ultra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source lists this kit both as 52000-120-120 and as 52000-120-12. Both point to the same CMP winterizing cell cap kit for the PowerClean Salt Ultra.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626277646548,"sku":"CTM-27-0021","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cd0ab6f9-b3ce-4284-8dbc-b0a4ca52f464.jpg?v=1788707570"},{"product_id":"skimmer-basket-sp1082ca-generic","title":"CMP Hayward SP1082CA Replacement Skimmer Basket","description":"\u003cp\u003eThis is the CMP 27180-152-000 skimmer basket, a generic replacement for the Hayward SP1082CA. It fits the Hayward 1082, 1083, 1084 and 1085 model skimmers, and is also referenced under the number B-152.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShape and size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket is cylindrical from top to bottom, with a lip at the rim that makes it slightly wider at the top than at the base. The source data carries two sets of measurements for it. One gives a 7 inch top, 5 inch height and 6-1\/2 inch bottom. The other gives 7-3\/8 inch top, 5-1\/8 inch height and 6-5\/8 inch bottom. Both are listed in the specifications so you can measure your old basket against them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric, and what that means\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a CMP made basket rather than the Hayward original. It substitutes for the OEM part in the same skimmers, but the color and the handle style may vary from what came out. If matching the original exactly matters to you, the genuine Hayward basket is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy baskets get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer baskets live in sun and chlorinated water and go brittle over a few seasons. Once one cracks, leaves and grit pass straight through to the pump basket and then the impeller, so a split basket is worth changing as soon as it shows.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626381193428,"sku":"SPG-601-0152","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_686691a3-59c8-4f61-bbf4-3bf7cc451669.jpg?v=1788709517"},{"product_id":"cmp-spa-master-25580-090-000-2-1-2-white-gunite-jet-body-with-niche","title":"CMP Spa Master 2-1\/2\" White Gunite Jet Body with Niche","description":"\u003cp\u003eThe CMP Spa Master 25580-090-000 is a 2-1\/2 inch white gunite jet body with niche. It is the rough in half of a spa jet, the part that gets plumbed and set into the shell during construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody and niche\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body carries the water and air connections and locates the jet in the wall. The niche is the recess that the finished jet internal seats into after the shell is plastered. Having both as one molded part means the geometry is right without any field fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGunite specific\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is made to be poured into gunite. Fiberglass and vinyl liner pools use different bodies, so match the body to the shell type before ordering. The internals that complete the jet are ordered separately, which is normal: bodies go in during construction and internals go in at the end.\u003c\/p\u003e\u003cp\u003eIt is supplied in white, in the 2-1\/2 inch size.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626488312020,"sku":"CTM-25-1011","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_81e68bb6-f150-4a52-9523-78567397029e.jpg?v=1788710877"},{"product_id":"spa-light-adapter-repair-ring","title":"CMP Spa Light Adapter Repair Ring","description":"\u003cp\u003eThe CMP 25549-540-000 is a stainless steel adapter repair ring for a light niche whose mounting points have stripped or broken. It measures 5.5 in. across.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring retrofits into the existing niche. Three allen screws anchor it against the inside wall, giving the light a fresh set of mounting points without replacing the niche itself. A new bonding lug comes as part of the ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalled with the light in place\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring is built to detach for the light cord. That is the detail that matters on the job, because it means the repair can be made without pulling the light and its cord back out of the conduit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed as the spa version and CMP offers a pool version separately, while the product description supplied with this part uses the pool wording. Measure your niche against the 5.5 in. ring before ordering so you get the right one of the two.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626507972820,"sku":"CTM-301-1007","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d0861c2e-6013-4a74-95a5-7749c9c624a5.jpg?v=1788711089"},{"product_id":"ig-v-l-light-sealing-ring-kit-chrome","title":"CMP Inground Vinyl Light Sealing Ring Kit, Chrome","description":"\u003cp\u003eThe CMP 25549-100-000 is a light sealing ring kit in chrome, made for inground vinyl liner pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the seal exists\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA vinyl liner is a continuous waterproof membrane, and every fitting that passes through it is a deliberate hole. The light niche is one of them. The sealing ring clamps the cut edge of the liner tight against the face of the niche, sandwiching it so water stays in the pool instead of finding its way behind the liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSeals harden with age, sun and chemistry. Once the ring cracks or the gasket flattens out, the joint starts to weep. That shows up as steady water loss that carries on with the pump off, and sometimes as the liner pulling or wrinkling near the light. Because a leak behind the liner can wash out the base material, it is worth chasing early rather than topping the pool up all season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis version is chrome, which gives a bright metallic trim at the light rather than the plain white of a standard kit.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626576785620,"sku":"CTM-301-1018","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5ac37d39-167d-421f-bcda-a0e0da01122f.jpg?v=1788712634"},{"product_id":"jet-array-inline","title":"CMP In-Line Jet Array","description":"\u003cp\u003eThe CMP 23308-930-000 is an in-line jet array from Custom Molded Products. It is ordered by part number, and matching that number is the surest way to get an array that drops into the same place as the one coming out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn-line versus mounted\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe in-line configuration sits within the plumbing run itself. That matters when you are replacing an existing array, because the fitting has to line up with pipework that is already in the ground or already built into the shell.\u003c\/p\u003e\u003cp\u003eCustom Molded Products has supplied fittings to the pool and spa trade for decades, and CMP part numbers are carried across their catalog, so the 23308-930-000 designation is the reliable identifier here.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626580324564,"sku":"CTM-85-301","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_42aacfa0-0c5a-49ae-9ae6-02afd6313803.jpg?v=1788712664"},{"product_id":"3-4-male-x-3-4-slip-union","title":"CMP 3\/4\" Male x 3\/4\" Slip Union","description":"\u003cp\u003eThe CMP 21063-750-000 is a 3\/4 in. union with a male thread on one end and a slip socket on the other. It is the fitting most often used when plumbing a booster pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA booster pump comes off the pad more often than most equipment: for service, for storage and for winterizing. Plumbed with unions, that is a two minute job with a wrench. Plumbed solid, it means cutting the pipe and gluing it back every single time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe male thread goes into the pump port and the slip socket glues to 3\/4 in. pipe. Check the port sizes on your own pump before ordering, and look at whether the install needs a union on both the suction and the discharge side.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626825625812,"sku":"CTM-56-2006","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b0be2bc5-8ad2-4f13-a49a-f581f98640d7.jpg?v=1788715522"},{"product_id":"cmp-21063-350-000-superflo-pump-union-kit","title":"CMP Replacement SuperFlo Pump Union Kit","description":"\u003cp\u003eThe CMP 21063-350-000 is the replacement union kit for Pentair SuperFlo pumps. The unions are the threaded connections that join the pump to the suction and return plumbing so it can be disconnected without cutting pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThey take the load every time the pump is taken out for service, and they are the joint most likely to start weeping as a pump ages. Once the sealing face is scored or the nut has been over tightened, tightening it further makes the leak worse rather than better. New union hardware is the repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit goes on easily while the pump is already broken loose for a shaft seal, a lid o-ring or a basket change, so it is worth adding to that job rather than pulling the plumbing apart twice.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626994381012,"sku":"CTM-56-2009","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ec33e0dc-d57e-4115-a5db-649593500a1b.jpg?v=1788718866"},{"product_id":"spamaster-2in-insider-jetintdir-ss-wht","title":"CMP SpaMaster 2\" Insider Jet Internal, Directional, Stainless Steel, White","description":"\u003cp\u003eThe CMP 25591-110-000 is a SpaMaster 2 inch Insider jet internal, supplied in the directional stainless steel and white configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat an internal is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wall fitting body is glued into the shell and stays there. The internal is the visible part that drops into it and does the work of shaping the stream. Replacing an internal is a job you do by hand at the wall, with no plumbing to touch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJet internals are matched to their bodies and to the size of the jet, so ordering to the part number is the only reliable way to buy. This listing is the 2 inch directional SpaMaster Insider, part 25591-110-000.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627004440788,"sku":"CTM-85-0118","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_61667802-1a50-48de-847d-16dc7a89830e.jpg?v=1788718962"},{"product_id":"pvc-2-union-slip-by-slip","title":"SuperPro PVC 2\" Union, Slip by Slip","description":"\u003cp\u003eThe SuperPro 21049-200-000 is a 2 inch PVC union with slip connections on both sides and a self aligning design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions matter on a pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery piece of equipment that will eventually need pulling should sit between unions. When that day comes, the nuts break loose and the gear lifts out. Without them, the same job means cutting pipe, then gluing in couplings to put it back, and the pad slowly gets shorter every time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSelf aligning\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJoining two runs that are already glued in place rarely leaves them perfectly square to each other. The self aligning design lets the halves seat anyway, which is the difference between a union that pulls up tight and one that weeps no matter how hard you crank the nut.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627005620436,"sku":"SPG-56-0003","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5776e7c5-4823-4951-a0f5-fede6d7b0ede.png?v=1788718979"},{"product_id":"insider-1-1-2x-2-wht","title":"CMP Wall Return Fitting, 1.5\" FIP x 2\" Insider Fitting, White","description":"\u003cp\u003eThe CMP 25524-200-000 is a white wall return fitting with a 1-1\/2 inch FIP port facing the pool and a 2 inch connection behind it, listed for gunite construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it sits in the wall\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe return fitting is the piece cast into the pool wall that the return line lands on. The threaded pool side is what an eyeball, a directional fitting or a plug threads into, and the back is what the plumbing joins to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the 2 inch end\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 2 inch side is described two different ways in the manufacturer data: as an insider fitting, which goes inside the pipe, and as a socket, which takes the pipe inside it. Those are opposite joints, so measure and look at the pipe stub at your wall before ordering or gluing rather than assuming either one.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627007422676,"sku":"SPG-25-0010","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/25524-200-000.jpg?v=1788719002"},{"product_id":"cmp-25207-801-000-equalizer-suction-1-1-2-inch-mip-gray","title":"CMP Equalizer Suction, VGB, 1-1\/2 Inch MIP, Gray","description":"\u003cp\u003eThe CMP 25207-801-000 is an equalizer suction fitting in gray, with a 1-1\/2 inch MIP connection, carrying the VGB suction outlet rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the equalizer does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn equalizer is a second suction port set into the pool wall below the skimmer. If the water level drops below the skimmer mouth, the skimmer would otherwise pull air and the pump would lose prime. The equalizer keeps a supply of water reaching the pump instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 1-1\/2 inch MIP thread lets the fitting screw straight into a matching female connection at the wall. This is the gray version; the same fitting is sold in white under its own part number, so pick the one that matches the rest of your wall fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOn the rating\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuction outlet fittings are a safety item, not a cosmetic one. This fitting carries the VGB rating, which is what a replacement suction fitting needs to have.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627569590484,"sku":"CTM-251-8206","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8b57c481-22e3-4380-b722-c3f3ce0d0f2c.jpg?v=1788723746"},{"product_id":"bw-1-5-led-light-dn-fg-fit","title":"CMP Fiberglass Pool Dry Conduit Nicheless LED Light Wall Fitting 1.5\"","description":"\u003cp\u003eThe CMP 25503-510-500 is the dry conduit wall fitting for a 1.5 inch nicheless LED light in a fiberglass pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNicheless lighting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA nicheless light mounts straight into a wall fitting rather than sitting inside a large niche cast into the pool wall. That makes the fitting itself the mounting point and the pass through for the light cord, which is why it has to match both the light size and the pool shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePick the right version\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCMP makes the same fitting in separate versions for fiberglass, gunite and vinyl pools. This one is the fiberglass version. It is also the dry conduit variant, so it suits an installation where the conduit behind the wall is kept dry.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627586793684,"sku":"CTM-301-1023","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/bw-1.5-led-light-dn-fg-fit-CMP25503-510-500.jpg?v=1788723956"},{"product_id":"powerclean-ultra-mini","title":"CMP PowerClean Ultra\/Mini Chlorinator Cover Assembly, White","description":"\u003cp\u003eThe CMP 25280-100-200 is the white cover assembly for the PowerClean Ultra and PowerClean Mini chlorine feeders. It is the genuine CMP part, supplied as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the cover matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a plumbed in feeder, the cover is a pressure boundary. It has to seal against the feeder body every time the pump runs, with chlorine gas on the inside and direct sun on the outside. That combination is hard on plastic, and the lid is normally the first part of the feeder to go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSigns it needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater seeping from the rim when the pump is running, a lid that will not seat down evenly, hairline cracks around the threads, or chalky brittle plastic all point to a cover that is finished. Replacing it is far quicker than replacing the whole feeder.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627632373972,"sku":"CTM-451-1003","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b11860ef-f556-4e6f-a003-24f543b26da5.jpg?v=1788725627"},{"product_id":"generic-valve-for-hayward-vari-flo-sp0714t","title":"CMP Generic Multiport Valve Replacement for Hayward Vari-Flo SP0714T","description":"\u003cp\u003eThis is the CMP 27515-154-000, a seven position top mount multiport valve built as a generic replacement for the Hayward SP0714T Vari-Flo XL. It also replaces Hayward SP-711-13.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve is listed for the Hayward S164T, S166T, S180T, S190T, S210T, S220T, S244T and S245T sand filters. The flange measures 8 inches across and the ports are 1.5 in FPT. Maximum working pressure is 50 psi and maximum flow is 75 GPM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe seven positions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFilter is where the handle spends almost all of its life. Backwash reverses water through the sand bed and out the waste port to clear trapped debris. Rinse follows a backwash so the dirty water left in the tank goes to waste instead of back to the pool. Waste bypasses the filter entirely, which is how you drop the pool level or vacuum heavy debris straight out. Recirculate sends water back to the pool without going through the tank, Closed shuts the valve off, and Winter is the position used to winterize.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve comes with a pressure gauge and an o-ring. Turn the pump off before moving the handle, on this or on any multiport valve.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627702825172,"sku":"27515-154-000","price":131.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8c0f535a-0cf4-47e7-bd30-ac6c1dacde03.jpg?v=1788726768"},{"product_id":"front-housing-challenger","title":"CMP Challenger Replacement Front Housing","description":"\u003cp\u003eThe CMP 25357-004-000 is a front housing for the Pentair Challenger pump family. It is a generic replacement for the OEM threaded housing, part 355302.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need a housing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe front housing is the wet end body that the suction and discharge plumbing threads into and that the basket sits inside. Nothing about it is serviceable. Once it has cracked from a freeze, stripped a port thread, or split at a mounting boss, the only fix is a new housing. Trying to seal a cracked volute with epoxy buys weeks at best, and it usually fails under pressure with the pump running unattended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOEM versus replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a CMP part, not a Pentair one. It is built to take the place of the 355302 threaded housing at a lower cost, which makes sense when the motor, impeller and seal plate are all still good and only the housing has failed. If your service history calls for factory parts throughout, order the Pentair housing instead.\u003c\/p\u003e\u003cp\u003eSince the pump comes fully apart for this job, it is worth renewing the shaft seal, the housing gasket or o-ring, and the strainer basket at the same time.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627718619348,"sku":"CTM-101-1003","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a1aaebbf-961e-4dd1-8451-598f2ae2f873.jpg?v=1788727077"},{"product_id":"aquamoto-white-3-4-eyeball-pack-of-6-with-installation-tool","title":"Aquamoto White 3\/4\" Eyeball Pack of 6 with Installation Tool","description":"\u003cp\u003eThis Aquamoto pack contains six white directional flow eyeball inlet jets with a 3\/4 inch opening on a 1-1\/2 inch MIP thread, plus one installation tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCirculation you can aim\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn eyeball fitting swivels inside the return, so each jet can be pointed deliberately. Angled correctly, the returns sweep the surface toward the skimmer and keep the deep end from going stagnant. Pointing them straight out into open water wastes most of that effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the tool matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEyeballs seat tightly and get stiff with age. The included tool grips the fitting properly so you can set it or free it without cracking the ring or chewing up the face. The set cross references to 400-1410D, 540021 and SP1419D.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627734806740,"sku":"AQM-25552-300-000-MF","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_92ab259a-3a09-4cf9-aa58-fac1d4a83289.jpg?v=1788727488"},{"product_id":"filter-saver-large-skimmer-sock-5-pack","title":"CMP Filter Saver Large Skimmer Sock, 5 Pack","description":"\u003cp\u003eThe CMP Filter Saver is a fine mesh sleeve that fits inside the skimmer basket. This is the large size, five to a package, and the socks are reusable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat they catch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket is built to hold leaves and larger debris. Pollen, seed pods, fine dirt and hair go straight through it and end up in the filter. The Filter Saver goes over the basket and catches that fine material at the skimmer, where it takes half a minute to remove.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it saves the filter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything the sock traps is material the filter never has to hold. Cleanings stretch further apart, filter elements last longer and pressure climbs more slowly through the season. During pollen season or after a storm, a sock can be the difference between a quick basket check and a full filter cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing them\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePull the basket, slide the sock over it, and put the basket back. When the sock loads up, flow through the skimmer drops off. That is the signal to rinse it and refit it.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627744669908,"sku":"CTM-251-7001","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0e8e8460-d56b-4383-bcc8-26afb0c780f9.jpg?v=1788727637"},{"product_id":"leaf-trap-basket-hay-pentair","title":"Pentair Rainbow #186 Leaf Trap Basket Heavy Duty","description":"\u003cp\u003eThis is the heavy duty replacement basket for the Rainbow #186 leaf trap, Pentair part number 27182-020-000. It is the plastic basket that sits inside the trap and holds debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the heavy duty version\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA leaf trap basket takes a beating: it is loaded with wet leaves, lifted out and knocked clean over and over. The heavy duty basket is the reinforced version, which is what to reach for when a standard basket has been cracking or splitting around the rim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket alone. The canister, lid and o-ring are separate items, so if the trap body itself is damaged you need more than this part.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627757318356,"sku":"CTM-401-1001","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_66b53b80-1820-4612-bf36-fef3f37e783b.png?v=1788727754"},{"product_id":"union-1-5-thread-x-2-slip-hi-temp","title":"CMP Union, 1.5\" Thread x 2\" Slip, Hi-Temp","description":"\u003cp\u003eThe CMP 21063-160-000 is a hi-temp union assembly that threads into a 1-1\/2 inch port and glues to 2 inch PVC. It is the fitting you use when the pump or filter is 1.5 inch and the plumbing around it is 2 inch, which is a very common combination on a modern system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the O-ring matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe threaded side seals on an O-ring, not on thread tape. That removes the whole ritual of wrapping, testing, unwrapping and rewrapping, and more importantly it removes the reason people overtighten. A tapered thread pulled up hard into a plastic housing is how pump and filter ports get cracked, and it is an expensive way to fix a small leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHi-temp construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is CPVC and PVC rather than plain PVC, so it handles the warmer water on the discharge side of a heater without going soft. The union face itself seals on a T ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eServiceability\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe point of a union is that it comes apart. Loosen the nut and the equipment separates from the plumbing, so a pump can be pulled for a seal change or a filter opened without a saw and a bag of couplings.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627842318548,"sku":"CMP-21063-160-000","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_43740c99-c54f-48c2-84d2-56b1711dbb7b.jpg?v=1788728141"},{"product_id":"heavy-duty-whisperflo-pump-basket","title":"CMP Pro Series Heavy Duty Whisperflo Pump Basket","description":"\u003cp\u003eThis CMP Pro Series basket is a heavy duty replacement strainer basket built in the Pentair Whisperflo pattern. It goes into the pump pot in place of the original and is compared by CMP to 070387, V20-200 and B-199.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt heavier on purpose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStrainer baskets get pulled, knocked and dropped every time the pot is cleaned, and the original part is often the first plastic on a pump to crack. CMP builds the Pro Series for service work: the basket is a heavier version of the original and carries extra feet on the bottom, which supports it against the pot floor instead of letting the base flex under load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket measures 5-3\/4 inches across the top, 8-1\/2 inches tall and 3-3\/8 inches across the bottom. A cracked basket is worth changing quickly rather than living with, because anything that gets past a split basket goes straight into the impeller.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627845660884,"sku":"CTM-101-1371","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_da27638a-877e-4221-a578-f07a06289f15.jpg?v=1788728191"},{"product_id":"generic-replacement-basket-whisperflo","title":"SuperPro Generic Pentair Whisperflo, IntelliFlo Pump Basket","description":"\u003cp\u003eThe SuperPro B-199 is a generic replacement strainer basket for Pentair Whisperflo and IntelliFlo pumps. It is not an OEM part, it is an aftermarket basket cut to the same dimensions so it drops into the same pot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the basket does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything the skimmers miss ends up in the pump pot. The basket holds leaves, twigs and grit so they never reach the impeller or the shaft seal, which are the expensive parts behind it. A basket with a split side or a broken lug lets debris straight through, and the first sign is usually a drop in flow or a noise from the wet end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the fit before ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis basket stands 7 3\/4\" tall, 5 3\/4\" across the top and 3 1\/4\" across the bottom. It is listed for Pentair Purex, Aquatron #P-01325 Whisperflo, IntelliFlo and Waterway Hi-Flow pumps, and it also answers to the numbers 070387, 27180-199, 70387 and 319-3230. Color may vary from the photograph.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627851165908,"sku":"SPG-601-0199","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_637f6ef6-8012-4cad-9902-c60ea11236ec.jpg?v=1788728294"},{"product_id":"cmp-20k-gallon-powerclean-scg-cell-52000-220-110","title":"CMP PowerClean Salt Ultra 320 SCG Cell, 20K Gallon","description":"\u003cp\u003eThe CMP 52000-220-110 is the replacement cell for the PowerClean Salt Ultra 320 chlorine generator, rated for pools up to 20,000 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cell serves the CMP PowerClean Ultra 320 and PowerClean Econ 320, and it also fits the SGS Breeze 320, SGS Wave 320 and SGS 1FIN-CEBRZ320. All of these use the same 320 series cell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy cells are replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA salt cell is a wearing part. The plates inside generate chlorine from the salt in the water and lose capacity over years of service, so output falls even though the control unit is fine. When the salt reading and the settings both check out and chlorine still will not hold, the cell is the part to change, and the existing electronics stay in place.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627877576916,"sku":"CTM-45-4021","price":705.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6a64c5a3-82c6-4857-a6cc-96999e44f7fb.jpg?v=1788729517"},{"product_id":"cmp-25207-700-000-equalizer-suctionvgb2-sa-insider-wh","title":"CMP Equalizer Suction (VGB) 2\" SA Insider, White","description":"\u003cp\u003eThis is the CMP 25207-700-000 equalizer suction fitting, the 2 inch SA insider version in white. It carries a VGB listing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe equalizer line runs from the skimmer down through the wall, and it needs a suction fitting on the pool side. VGB is the standard those suction outlets are built and certified to, and a cracked, missing or non compliant fitting is one of the first things flagged on an inspection. Replacing it with the same rated part keeps the equalizer working as designed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the size and the style before you order. This is the 2 inch insider, which seats inside the wall fitting. CMP also lists the same equalizer suction in gray, and a 1.5 inch MIP version in white, so match what is already in the wall.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627946324180,"sku":"CTM-251-8200","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_048591ed-5df3-4849-8aca-4dbd3fb484e5.jpg?v=1788730549"},{"product_id":"stainless-steel-pentair-piston-rod-assebmly","title":"CMP Stainless Steel Piston Rod Assembly for Pentair Push Pull Valve","description":"\u003cp\u003eThis is the CMP stainless steel piston rod assembly for the Pentair 2 in. PVC push pull valve. It replaces the Pentair OEM 273241 assembly, with a stainless shaft in place of the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChecking the fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly measures 7-1\/2 in. centerline, and the shaft carries Piston Assembly 27-3241 molded into it. Measure the rod you are pulling out against that before you order, because push pull valves come in more than one size and the rod length is the thing that tells them apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart numbers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same assembly is listed under 273241SS, 273241HD, 25831-122-100 and 273241. If your paperwork or the valve label shows any of those, you are in the right place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe piston rod takes the full push and pull of every backwash cycle, and the seals ride on it. Once the shaft is scored or bent, the piston will not seat cleanly and the valve leaks between ports no matter how good the seals are.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627948912852,"sku":"CTM-051-3001","price":136.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_265ab8e3-3887-402b-bd39-b385c54294b0.jpg?v=1788730626"},{"product_id":"powerclean-ultra-chlorinator-flow-meter-assembly","title":"CMP PowerClean Ultra Chlorinator Flow Meter Assembly","description":"\u003cp\u003eThe CMP 25280-100-950 is the flow meter assembly for the PowerClean Ultra chlorinator. It is the genuine CMP part, supplied as the complete meter rather than a gauge face alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the meter matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe flow meter is the only reading you get from a tablet chlorinator. It tells you how much water is being routed through the tablet chamber, which sets the feed rate. When the meter sticks, fogs or stops moving, the chlorinator keeps feeding but you are dosing blind, and that usually shows up as chlorine that swings between too low and too high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same part is listed both as 25280-100-950 and as 25280100950, so either number is the right one. It fits the CMP PowerClean Ultra chlorinators.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627976732884,"sku":"CTM-451-1005","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fae306fb-4308-4b07-82d8-93140a691fd7.jpg?v=1788732113"},{"product_id":"gunite-spa-jet-puls-1-5in-mpt-gy-ss","title":"CMP Spa Master 1.5\" Gunite Jet Internal Pulsator, Stainless Steel\/Gray","description":"\u003cp\u003eThe CMP 23315-031-200 is a Spa Master gunite jet internal with pulsator action, finished in gray with a stainless steel face. It threads into a standard 1.5 inch wall fitting, which is what makes it a straightforward way to add therapy jets without opening up the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost pool and spa returns are a plain directional eyeball. That moves water but it does nothing for you if you are sitting in front of it. Swapping the internal for a Spa Master pulsator gives that same return a massage style output, using the plumbing that is already there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe internal carries 1.5 inch MPT threads and screws into any standard 1.5 inch FPT wall fitting. This is the gunite version, sized for a concrete shell. If you want more from the jet, CMP pairs these with venturi tees or a JetArray 2x2 cluster.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627978240212,"sku":"CTM-85-0130","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6566e831-1950-4125-831a-0d827632c701.png?v=1788732164"},{"product_id":"cmp-21093-900-000-90-degree-hose-adaptor","title":"CMP 90-Degree Hose Adaptor","description":"\u003cp\u003eThe CMP 21093-900-000 is a 90 degree hose adaptor for pool and spa plumbing. It carries a hose connection around a right angle, which is what you need where a sweeping bend will not fit or the hose would otherwise kink.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe available information on this fitting is limited to the manufacturer part number, so order it by that number and check it against the hose and the port at your end before installing.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48628784169172,"sku":"21093-900-000","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1dfe2d91-6b70-47e7-b427-446bc88f4265.jpg?v=1788750620"},{"product_id":"insider-1-1-2x-2-gry","title":"CMP Insider Wall Return Fitting, Gray","description":"\u003cp\u003eThe CMP 25524-201-000 is an Insider wall return fitting in gray, made by Custom Molded Products. It seats into the return outlet in the pool wall and provides a threaded port for an eyeball or a directional return nozzle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the size first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source data for this item is not consistent about the inlet thread. The listing title describes it as a 1.5 inch FIP by 2 inch Insider fitting, while the product description gives it as a 2 inch FIP by 2 inch socket. Both readings are carried here rather than picking one. Measure the fitting in the wall, or ask us to confirm the exact size, before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does not include\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe fitting is supplied on its own. The eyeball or directional nozzle that threads into it is a separate part, so order that alongside if you are replacing the whole return.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48628786462932,"sku":"CTM-25-2025","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CTM-25-2025_1a.png?v=1788750682"},{"product_id":"heavy-duty-swimquip-u-3-skimmer-basket","title":"CMP Heavy Duty Swimquip U-3 Skimmer Basket","description":"\u003cp\u003eCMP 27182-009-000 is a heavy duty replacement skimmer basket for the U-3 skimmer, the model sold under the Swimquip name. It is built to roughly twice the wall thickness of the basket that came in the skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy thickness matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket is one of the few pool parts that gets handled every week. It gets lifted full and wet, tapped on the deck, and occasionally pried at when leaves pack in. Thin baskets crack at the rim and split down the side, and once cracked they let debris through to the pump. A thicker basket simply lasts longer under the same treatment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWeighted so it stays put\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA plastic encased metal weight sits in the base. As the skimmer fills, an unweighted basket wants to float up off its seat and let water bypass it. The weight holds this one down where it belongs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross references\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed as a substitute for Hayward SP1070, Aladdin B-9 and Val-Pak V22-110, so it covers the common part numbers for this basket size. Check the fit against your throat first: the basket measures 8-1\/4 inch across the top and 5-3\/8 inch tall.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48628806254804,"sku":"CTM-251-0503","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_10f9172e-08c5-4db5-a600-dbf6c2cb1b68.jpg?v=1788751861"},{"product_id":"insider-1-1-2x-2-blk","title":"CMP Wall Return Fitting, 1.5\" FIP x 2\" Insider Fitting, Black","description":"\u003cp\u003eThe CMP 25524-204-000 is a black wall return fitting with a 1-1\/2\" FIP connection and a 2\" pool side, listed for gunite pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe return fitting is the piece at the pool wall that filtered water comes back through. It threads onto the return line and finishes the penetration on the inside of the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur source describes the 2\" end in two ways, as an insider fitting and as a socket. Measure what is in the wall now, or pull the old fitting and take it with you, rather than ordering from the pipe size alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBlack hardware disappears into dark plaster, pebble and tile finishes in a way white fittings never do. On a pool that has been resurfaced dark, changing the returns over is a small detail that makes the finish look finished.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48628811006164,"sku":"SPG-25-0011","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/25524-204-000.jpg?v=1788752225"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/cmp-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}