{"title":"CMP","description":"\u003cp\u003eCMP pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"powerclean-ultra-in-line-chlorinator-clear-glass-lid","title":"CMP PowerClean Ultra In-Line Chlorinator with Clear Glass Lid","description":"\u003cp\u003eThe CMP PowerClean Ultra is an in-line tablet chlorinator for residential in-ground pools, and this version comes with the clear glass lid. It plumbs into the return line after the filter and heater and feeds chlorine at a rate you set on the dial. CMP rates it for pools from 5,000 to 50,000 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the glass lid matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlastic feeder lids cloud and fade after a season or two of sitting over concentrated chlorine. Glass does not, so the lid on this unit stays clear and you can see how many tablets are left without unscrewing it. The chamber holds twelve 3 in. tablets or about 5 lb of 1 in. tablets, which means fewer refills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to be serviced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll of the piping is inside the body, so there is no external tubing to crack or drip. A 100 percent shut-off dial and a built-in flow indicator make it easy to dial the feed rate in, and a bottom drain plug empties the chamber for winterizing. Unions for both 1.5 in. and 2 in. pipe are included, so the feeder disconnects in a minute when it needs cleaning.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624874389716,"sku":"CTM-45-4001","price":150.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ac35ed10-3c4b-4a62-bed4-579a02fc709f.jpg?v=1788648036"},{"product_id":"pool-light-adapter-repair-ring","title":"CMP Pool Light Adapter Repair Ring","description":"\u003cp\u003eThe CMP Pool Light Adapter Repair Ring is a stainless steel frame that retrofits into an existing pool light niche to replace a stripped or broken light mount. Instead of chipping out and replacing the niche, you anchor this ring to its inside wall and screw the light to the ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it mounts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree allen screws clamp the ring against the inside of the niche. A new bonding lug is part of the ring, so the bonding connection to the light is restored with the same install. The ring is built to detach, which lets you fit it around the light cord and complete the job with the light still in the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring measures 10.5 in. in diameter and is intended for standard inground pool light niches. For spa niches, CMP offers a smaller spa light repair ring.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624875274452,"sku":"CTM-301-1006","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8e08ff9b-0b15-42d7-9318-cb0f261b60d7.jpg?v=1788648404"},{"product_id":"floating-chemical-dispenser-large-for-3-tab","title":"Aquamoto Jumbo Chlorine Floater for 3\" Chlorine Tabs","description":"\u003cp\u003eThe Aquamoto jumbo chlorine floater holds about 4.5 lb of 3 in. or 1 in. chlorine tablets, so it goes longer between refills than a standard floater. It also lets you know when it is time to add tablets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeed control and lid\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA variable flow ring sets how much water reaches the tablets, which sets the chlorine feed rate. The top twist locks, so the tablets stay in while the floater drifts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStays off the steps\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe larger throat on this model helps keep the floater from settling on steps and benches, where a parked floater can bleach the finish.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624875634900,"sku":"CMP-58470-110-700","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_24013006-9197-4fc3-a3ed-63844a01b6a8.jpg?v=1788648447"},{"product_id":"pump-union-cpvc-1-1-2-slip-by-male-thread-with-o-ring","title":"CMP Pump Union CPVC 1-1\/2\" Slip by Male Thread with O-Ring","description":"\u003cp\u003eThe CMP 21063-154-000 is a 1-1\/2 in. CPVC pump union with a slip socket on one side and a male threaded end with o-ring on the other. It is the fitting that lets a pool pump be unbolted from the plumbing for service instead of being cut out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it connects\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe slip end solvent welds onto 1-1\/2 in. pipe. The male threaded end screws into the pump housing. The union nut in the middle draws the two halves together on an o-ring, which means the joint can be opened and closed as often as needed without a new gasket each time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CPVC\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCPVC handles warmer water than standard PVC, so this union is a sensible choice on the pump side of a heater loop or anywhere the plumbing sees heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 1-1\/2 in. slip version. If your suction or return side is plumbed in 2 in. pipe, CMP also makes a 1-1\/2 in. thread by 2 in. slip hi-temp union, part 21063-160-000.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624877502676,"sku":"SPG-56-0012","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_763d0994-baac-4337-be26-abdd0544e397.jpg?v=1788648550"},{"product_id":"pump-union-threaded-2-mpt-x-2-slip-cpvc","title":"CMP Pump Union, Threaded 2\" MPT x 2\" Slip, CPVC","description":"\u003cp\u003eThis CMP union puts a detachable joint between your pool pump and the plumbing. One end is 2 in. male pipe thread that screws into the pump port, the other is a 2 in. slip socket that glues onto the pipe. When the pump needs to come off, back off the union nut and lift it out. Nothing gets cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CPVC matters here\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump unions live next to the hottest part of the system. If a pump runs dry or overheats, an ordinary PVC union can shrink and open a suction leak that is hard to find. This union is molded from heat tolerant CPVC, which holds its shape through that kind of abuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCMP sizes it for Pentair WhisperFlo, IntelliFlo and Challenger pumps, and it works on any pump with a 2 in. female threaded port. It is sold individually, so order two to union both the suction and discharge sides.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624879435988,"sku":"CTM-56-2001","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a6e9a8aa-f71b-41d9-90a4-f7c916beeec1.jpg?v=1788648718"},{"product_id":"120-240v-25k-gal-del-aop-25-full-flow-sanitizer","title":"CMP Next Gen DEL AOP 25 Ozone + UV-C Sanitation for Residential Pools, 25,000 Gallons, 120V\/240V","description":"\u003cp\u003eThe CMP Next Gen DEL AOP 25 is a full flow advanced oxidation sanitizer for residential pools up to 25,000 gallons. It runs a corona discharge ozone cell and a high output UV-C lamp in a single cabinet, and the two together generate hydroxyls in the primary circulation line. That oxidation destroys viruses and bacteria including Giardia, E. coli and Cryptosporidium, and it breaks apart the chloramines that cause chlorine smell, itching and red eyes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLess chlorine, clearer water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the AOP process does so much of the oxidizing, the chlorine required to hold a safe residual drops. Contaminants are destroyed rather than left for the filter, so filtration works better and the water polishes up. It is certified to NSF\/ANSI Standard 50 as a supplemental sanitizer and is UL and cUL listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the cabinet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne APG2 ozone cell rated at 215 mg\/hr, a low pressure high output UV-C germicidal lamp at 254 nm rated for 16,000 hours, and a high flow UV-C chamber. Sensors monitor both the UV-C and ozone subsystems. The wiring path and terminal block are easy to reach, the cabinet is a CSA\/NEMA 3 enclosure suitable for indoor or outdoor installation, and there is a built-in drain for winterization.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInlet and outlet are 2 in. PVC unions and the optimal flow rate is 30 GPM. It mounts on the floor or a wall, measures 24 1\/4 in. high by 12 1\/2 in. wide by 13 3\/8 in. deep, weighs 40 lb dry, and runs on 110\/240 VAC at 50\/60 Hz drawing 0.7 amps. It is compatible with variable speed pumps.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624879796436,"sku":"CTM-45-4031","price":1512.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e9f51c71-7492-4a3f-a3e5-b52b9fae4960.png?v=1788648776"},{"product_id":"120-240v-40k-gal-del-aop-40-full-flow-sanitizer","title":"CMP Next Gen DEL AOP 40 Ozone + UV-C Full Flow Sanitation for Residential Pools, 40,000 Gallons, 120V\/240V","description":"\u003cp\u003eThe CMP 53000-040-000 is the Next Gen DEL AOP 40, an advanced oxidation sanitizer for residential pools up to 40,000 gallons. It combines ozone with UV-C light in a full flow chamber and runs on 120V or 240V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow AOP works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOzone is generated and injected into the water, then the water passes under UV-C light. The combination produces hydroxyl radicals, which oxidize organics, chloramines and other contaminants faster than chlorine or ozone on their own. Because the unit is full flow, the entire circulation stream is treated on every pass rather than a bypassed fraction of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does for the pool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn AOP unit does the heavy oxidizing that a pool would otherwise ask of its chlorine, so the residual sanitizer can be held lower and the water carries fewer of the byproducts that cause odor and irritation. The pool still needs a residual sanitizer; the AOP 40 is a supplement, not a replacement.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624886546644,"sku":"CTM-45-4030","price":2128.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b151f04f-9842-405d-8ef5-44027b1d3d59.png?v=1788649962"},{"product_id":"heavy-duty-flowskim-skimmer-basket-sp1082-12-handle","title":"CMP FlowSkim HD Skimmer Basket with 12\" Handle for Hayward SP-1082 Skimmers","description":"\u003cp\u003eThe CMP 27182-352-000 is a heavy duty FlowSkim skimmer basket built to replace the SP1082CA basket in Hayward SP-1082 skimmers. It measures 7 in. across the top, 6-1\/2 in. across the bottom and 5 in. tall, and it carries a 12 inch FlowSkim handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe handle is the point\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard skimmer basket has to be fished out of the throat by hand, which means reaching into the water and into whatever the basket has caught. The FlowSkim handle stands up above the basket so you take hold of it from the deck, lift, dump and drop it back. Emptying the skimmer turns into a few seconds' work you do not have to think about.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy duty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket itself is CMP's thicker heavy duty version, made to survive years of lifting, knocking out against a bin and sitting in the sun. It does the same job as the original, catching leaves and grit before they reach the pump, and it does it for longer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for the Hayward SP-1082 skimmer. Measure your old basket if you are unsure: about 7 in. across the top and 5 in. tall means this is the one.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624922296532,"sku":"CTM-251-3011","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_48551c97-5eab-4122-b798-69eec83e0db4.jpg?v=1788653614"},{"product_id":"generic-bottom-collector-manifold-cx3000c","title":"CMP Generic Bottom Collector Manifold for Hayward CX3000C","description":"\u003cp\u003eThe CMP 25357-750-000 is an aftermarket bottom collector manifold made to replace the Hayward CX3000C in SwimClear and SuperStar Clear cartridge filters. The manifold sits in the base of the tank, locates the four filter cartridges and collects the filtered water on its way to the outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach of the four cartridges seats on the manifold, which is why a cracked or warped manifold shows up as dirt bypassing the filter or cartridges that will not sit square. The internal air bleed is molded in, so air that collects under the lid can escape as the original design intended.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm CX3000C is the bottom manifold listed for your filter model before ordering. With the tank open it is worth checking the bulkhead and tank o-rings and replacing any that have flattened, since they are the usual source of leaks after a reassembly.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624922591444,"sku":"CTM-051-8256","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a7169ab0-d43e-4203-8bf7-b294a5a314fc.png?v=1788653650"},{"product_id":"sweep-hose-tail-scrubber-5-pack","title":"CMP Sweep Hose Tail Scrubber (5 Pack)","description":"\u003cp\u003eThe CMP 25563-300-500 is a five pack of foam tail scrubbers for the sweep hose on Polaris pressure side cleaners. It is the CMP replacement for the Polaris 9-100-3105 scrubber, sold in quantity so you have spares on hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the scrubber does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sweep hose tail whips across the wall and floor behind the cleaner, and the foam scrubber on its tip is what actually scrubs the surface. It also cushions the hose end so it does not slap bare plastic against the liner or plaster. When the foam wears thin or falls off, the tail stops cleaning and starts scuffing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the sweep hoses on the Polaris 180, 280, 360, 380, 480 Pro and 3900. Replacement is a slip on job: pull the old scrubber off the tail and push the new one on.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624924393684,"sku":"25563-300-500","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_32be0ce3-df89-4d75-8292-625c3b993537.jpg?v=1788653709"},{"product_id":"powerclean-ultra-in-line-chlorinator-white-lid","title":"CMP PowerClean Ultra In-Line Chlorinator, White Lid","description":"\u003cp\u003eThe CMP PowerClean Ultra is an in-line tablet chlorinator for residential pools from 5,000 to 50,000 gallons, above ground or in ground. This is the white lid version, part 25280-110-000, for a 2 in. plumbing run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to be serviced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll of the piping is inside the body, so there are no external lines to crack or weep. It ships with 1.5 in. and 2 in. unions for a quick disconnect, and a bottom drain plug lets you empty it for the season without pulling it off the pad. A clear glass lid is sold separately for anyone who wants to see the tablet level at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeed control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe dial is a true 100% shut-off, so you can stop the feed completely for a spa soak or when you are shocking the pool. A built in flow indicator shows how much water is passing through the feeder, which takes the guesswork out of setting it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe chamber holds twelve 3 in. tablets, or 5 lb of 1 in. tablets, which stretches the time between refills on a large pool.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624924655828,"sku":"CTM-45-4003","price":152.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bda22e2d-fa32-4cee-bf07-548c3225a65c.jpg?v=1788653735"},{"product_id":"del-aop-25-ozone-uv-generator-up-to-25k-gallon-pools","title":"CMP DEL AOP-S Ozone + UV Generator, up to 25k Gallon Pools","description":"\u003cp\u003eThe DEL AOP-S is an ozone plus ultraviolet sanitizer for in-ground pools up to 25,000 gallons, sold under CMP now that CMP has taken DEL Ozone into its line. Part number SEC-50-01. It was previously sold as the AOP 25 and, before that, as the Solar Eclipse; the unit is the same, the name and label have changed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow AOP works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe AOP-S generates ozone with DEL's Plasma Gap technology and passes it by an integrated Trident germicidal UV lamp. UV light reacting with ozone produces hydroxyl free radicals, which have more oxidation potential than ozone on its own and roughly three times the oxidizing power of chlorine. The two technologies working together are what DEL calls the Advanced Oxidation Process, and the result is more sanitizing power than either would deliver separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is rated as a primary sanitizer for in-ground pools up to 25,000 gallons and can be installed during construction or added to an existing pool. A standard size mixing de-gas vessel is available for the AOP-S and is listed separately. For pools up to 50,000 gallons, DEL offers the AOP 50.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624930783444,"sku":"DEL-45-1042","price":1138.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_93a2cb86-695f-4665-a0bc-bb1c3adb96ce.png?v=1788655127"},{"product_id":"powerclean-ultra-vs-in-line-chlorinator-clear-glass-lid","title":"CMP Powerclean Ultra VS In-line Chlorinator, Clear Glass Lid","description":"\u003cp\u003eThe CMP Powerclean Ultra VS is an in-line tablet chlorinator built around the way a variable speed pump actually runs: long hours at low flow. Part number 25280-150-000, with the clear glass lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChlorine at low flow\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStandard feeders lose output when the pump slows down. This one is designed to keep chlorine flowing at system rates as low as 20 GPM, and it is sized for the 20 to 50 GPM range. It does that without adding meaningful back pressure, so the pump keeps its efficiency.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to live with\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe variable speed option installs and removes without tools. The clear glass lid shows the tablet level at a glance, so you know when to reload without opening the feeder.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624937861332,"sku":"CTM-45-4007","price":171.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_71911287-d606-405f-bfc2-2bf12d61613d.jpg?v=1788655749"},{"product_id":"clear-glass-powerclean-chlorinator-cover","title":"CMP Clear Glass PowerClean Chlorinator Cover","description":"\u003cp\u003eThe CMP 25280-109-200 is the clear glass replacement lid for the PowerClean Ultra chlorinator, supplied with a new lid o-ring. CMP offers it as the upgraded lid for the feeder, with better durability and better visibility than the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy glass\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA clear lid lets you check on the feeder without opening it, and glass keeps its clarity over the long run in chlorine service. It is a direct replacement, so it fits the PowerClean Ultra without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid and a new lid o-ring. Fit the fresh o-ring when you install the lid so the feeder seals properly from the start.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624939008212,"sku":"CTM-451-1007","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9b1c6b1e-990b-408d-aee0-8401383128c6.jpg?v=1788655900"},{"product_id":"cmp-j-style-rgb-gunite-led-bubbler-25503-100-000","title":"CMP Brilliant Wonders 8\" LED Bubbler Gunite Unit J-Style with 100' Cord","description":"\u003cp\u003eThe CMP Brilliant Wonders 25503-100-000 is an 8 in. RGB LED bubbler for gunite pools. The light and the bubbler are one J-style unit, so the column of water it pushes up is lit from inside and changes color with the rest of a Brilliant Wonders installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for new construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the gunite unit, meant to be set in a shallow area during gunite or shotcrete work. It ships with a 100 ft cord, which on most layouts reaches the equipment pad without a splice.\u003c\/p\u003e\u003cp\u003eConfirm the cord run and the control system you plan to use before ordering, and pair it with the matching CMP lighting components for the rest of the pool.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624956440788,"sku":"CTM-27-5001","price":693.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cd527aaf-f140-47f6-8645-ccbf20c33269.jpg?v=1788655983"},{"product_id":"cmp-25506-320-100-channel-drain-cover-frame-32-inch-pvc-white","title":"CMP 32-Inch PVC Channel Drain Cover and Frame, White","description":"\u003cp\u003eThe CMP 25506-320-100 is the white PVC cover and frame set for a 32 in. channel main drain. It replaces the grate and frame on a CMP 32 in. channel drain body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChannel drain covers live in sun and chlorinated water and eventually chalk, crack or become brittle. A damaged cover should be replaced before it breaks, and this set provides both the cover and the frame so the new grate seats properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the cover and frame only. The 32 in. channel drain body, sump and adjustable collar adapter are separate CMP parts. Confirm your existing cover is the 32 in. size.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624957391060,"sku":"CTM-251-3019","price":141.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5629eb0b-b27b-4e81-8f49-c1aab76f5eae.jpg?v=1788656108"},{"product_id":"cmp-25503-460-000-bw-4-bubbler-body-assembly-gunite","title":"CMP Brilliant Wonders 4\" Bubbler Body Assembly Gunite","description":"\u003cp\u003eThe CMP 25503-460-000 is the Brilliant Wonders 4 in. LED bubbler body assembly for gunite pools, in white. It is the in floor housing and water flume hardware that the bubbler system is built on, made for sun shelves, beach entries and shallow lounging areas where a low, flush water feature suits the space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation and adjustment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body installs flush with the pool floor, so the hardware stays out of sight and only the bubbling column shows. An adjustable directional nozzle is included for aiming the flume, useful on sloped beach entries, and nozzle reducers let you dial the flow in for the height and effect you want.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdding light\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body accepts the Brilliant Wonders 1.5 in. LED light module, which is sold separately and provides RGBW color with beam focusing lenses and Smart Sync. With the light installed, its IP68 quick disconnect cord system lets you service the light without pulling long lengths of cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the gunite version and does not include the light. Fiberglass and vinyl versions of the 4 in. body, in several trim ring colors, are separate parts.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624965910740,"sku":"CTM-271-1008","price":123.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_91262a29-5734-47e5-b4ea-a495e138b1a6.jpg?v=1788656800"},{"product_id":"b-9-skimmer-basket","title":"CMP Pool Skimmer Basket, Replaces Hayward SP1070-E","description":"\u003cp\u003eThe CMP 27180-009-000 is a B-9 size skimmer basket, the common size shared by several skimmers from different manufacturers. It replaces the Hayward SPX1070E basket in the SP1070 Skim Master series, the Pentair Bermuda basket 516112 and the Sta-Rite U3 basket 08650-000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBaskets look alike and fit differently, so measure before ordering. This one is 8-5\/16 in. across the top rim, 5-3\/4 in. across the bottom and 5-3\/16 in. tall. If your old basket matches those numbers, this one drops onto the same ledge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cracked or missing basket lets leaves and debris straight into the pump strainer, and a basket with a split rim can jam in the throat. A spare on the shelf is cheap insurance.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624967680212,"sku":"SPG-601-0009","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d00788ea-76fd-4e8b-8f82-647112977bc6.jpg?v=1788656855"},{"product_id":"eyeball-jet-cap","title":"CMP Pool Eyeball Jet Cap Cover","description":"\u003cp\u003eThe CMP 25552-020-300 is a white threaded cap that takes the place of the eyeball on a pool return fitting. It threads onto most common 1-1\/2 in. MIP directional flow outlets, which covers the standard eyeball returns from Hayward, Pentair, CMP and Polaris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnthread the locking ring from the existing eyeball, remove the eyeball, and thread the cap onto the fitting. No tools are called for beyond what it takes to loosen the ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost pools use it at closing time, sealing each return line as part of winterizing. It also works as a service cap for shutting off one return while the rest of the system runs.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625020076244,"sku":"CTM-25-2082","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1b604032-3b74-460e-ae3f-e47abb5ffc7d.jpg?v=1788662247"},{"product_id":"hydro-seal-black-cpvc-check-valve-2-s-x-2-5-spgt-corrosion-resistant","title":"CMP Hydro Seal Black CPVC Check Valve 2 in. S x 2.5 in. SPGT 25830-400-000","description":"\u003cp\u003eThe CMP 25830-400-000 is a Hydro Seal check valve in black CPVC with a 2 in. socket on one end and a 2.5 in. spigot on the other. It carries a 2 lb spring, is rated to 50 psi, and is NSF certified. It is a serviceable valve, so the internals can be reached without cutting it out of the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA check valve keeps water from running backward when the pump shuts off. On a pool pad that means holding prime on a suction line, keeping a heater or chlorinator from draining back, or isolating a solar loop. The dual size body fits directly into 2 in. pipe or a 2.5 in. fitting, which covers most residential equipment pads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for pool water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is CPVC and corrosion resistant, in black. The 2 lb spring closes the valve as flow stops without adding much restriction while the pump is running. Because the valve is serviceable, a worn flapper or spring is a quick fix in place rather than a replumb.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625022075092,"sku":"CTM-56-1029","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_281eaa71-4dd8-4f67-8b57-6f9475a57044.jpg?v=1788662499"},{"product_id":"cmp-powerclean-salt-cell-540-40k-gallons-52000-240-110","title":"CMP PowerClean Salt Cell 540, 40K Gallons","description":"\u003cp\u003eThis is the CMP PowerClean Salt Cell 540, part number 52000-240-110, rated for pools up to 40,000 gallons. It is the replacement cell for an installed PowerClean 540 system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy cells get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA salt cell is a wear part. The coated plates inside it convert salt into chlorine, and that coating is used up over years of running. When output drops and cleaning the plates no longer helps, the cell has reached the end of its life and a new one restores the sanitizer the pool needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the gallon rating on the cell you are removing. This listing is the 40K version, and the rating should match what the system was sized for.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625710563540,"sku":"CTM-45-4022","price":897.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CMP52000240110.jpg?v=1788688899"},{"product_id":"cmp-25506-320-000-32-white-vgb-unblockable-channel-main-drain-and-sump","title":"CMP 32\" White VGB Unblockable Channel Main Drain and Sump","description":"\u003cp\u003eThe CMP 25506-320-000 is a 32 inch white VGB unblockable channel main drain, supplied with its sump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy channel drains\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe VGB standard is about suction entrapment. One way to meet it is to make the outlet long enough that a single body cannot cover the whole opening, and a 32 inch channel does exactly that. It is a different approach from pairing two round drains, and it suits floors where a long linear outlet fits the layout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box, and what is not\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part covers the channel main drain and the sump. The 32 in. PVC channel drain cover and frame and the adjustable collar adapter are separate CMP parts, so check what your installation still needs before ordering.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625711841492,"sku":"CTM-251-3000","price":163.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e938b093-51fb-4888-83c6-94a6a3146972.png?v=1788688975"},{"product_id":"pool-defender-2-compact-sacrificial-zinc-anode","title":"CMP Pool Defender 2 in. Compact Sacrificial Zinc Anode","description":"\u003cp\u003eThe CMP 25810-400-050 is the compact version of the Pool Defender, an inline sacrificial zinc anode that plumbs into 2 in. pipe. It ships with 4 ft of solid copper ground wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe problem it solves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pool carries electrical current from several sources, and that current keeps flowing even when the pump is off. In salt water it is stronger still. Left alone it eats away at heaters, rails, fittings and anything else metal in the system. Building codes now expect that current to be controlled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eZinc gives the current an easier path than your expensive metal components, so the anode corrodes and they do not. Bonded correctly, the inline Pool Defender helps protect the whole pool from galvanic corrosion, and the compact body fits in tighter equipment pads than a full size anode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the zinc as part of normal maintenance and replace it once about half of it has eroded, which typically works out to every three years or so. The replacement is inexpensive compared with the parts it protects.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625712627924,"sku":"CTM-301-1008","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_53d6eae3-66d8-4cf0-965d-066e94757be7.jpg?v=1788689147"},{"product_id":"pool-skimmer-basket-handle-attachment-12-flowskim","title":"CMP FlowSkim Pool Skimmer Basket Handle Attachment, 12 in.","description":"\u003cp\u003eThe CMP FlowSkim basket handle attachment, part 25573-300-000, adds a 12 in. handle to a skimmer basket that did not come with one. It makes emptying the basket cleaner, faster and easier, because you lift and dump instead of reaching down into the skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe flow through design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle is more than a grab point. Water travels down the center of it, so when the basket packs solid with leaves the pump still gets water. That is the difference between a skimmer that chokes off and a pump that keeps its prime, and running dry is what wrecks pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe FlowSkim handle works with most skimmer baskets that stand at least about 5 in. tall. Measure your basket before ordering. The handle is sold on its own, to fit into a basket you already have.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625722163412,"sku":"CTM-251-0505","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_355ee840-8444-4b49-87e5-76d77dc659e5.jpg?v=1788689982"},{"product_id":"generic-top-manifold-assembly-built-in-air-relief-dex2400c","title":"CMP Generic Top Manifold Assembly with Built-in Air Relief, DEX2400C","description":"\u003cp\u003eThis is a CMP generic top manifold assembly for the Hayward Pro-Grid and Micro-Clear DE filters, replacing the Hayward DEX2400C. The air relief is built into the top of the manifold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the manifold does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe top manifold is the header the DE grids plug into. Water passes through the grids, into the manifold ports and out to the pool. If the manifold cracks, or a grid port loses its seal, unfiltered water and loose DE take the short route back to the returns. That is what people are seeing when DE keeps coming out of the returns despite new grids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric, not Hayward\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an aftermarket part made by CMP. It may vary in appearance from the Hayward original while matching it for fit and function. It is listed for the Pro-Grid DE2420, DE3620, DE4820 and DE7220 filters.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625743266004,"sku":"CTM-051-1709","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b0992c87-3509-4384-b215-681963ea9eb7.jpg?v=1788690577"},{"product_id":"aqualevel-water-leveler-white","title":"CMP AquaLevel Portable Automatic Water Leveler for In Ground Pool, White Lid","description":"\u003cp\u003eThe CMP AquaLevel keeps an in ground pool at the water level you choose without any plumbing work. It runs from a standard garden hose, sits at the skimmer, and closes the water off by itself once the level is right.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNothing to install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost automatic fillers are plumbed into the deck and tied to a water line. The AquaLevel is not. Connect a hose, set it in place, turn the water on and it takes over. No tools, no trenching, no permanent change to the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the level matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen evaporation pulls the water below the skimmer mouth, the pump starts drawing air. Running dry is what wrecks pump seals and shortens motor life, and it happens quietly over a hot week. Holding the level steady removes that risk and saves the daily check.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it earns its keep\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is most useful on a pool nobody watches every day: a rental, a vacation house, or any pool during a stretch of heat. Because it is portable it can be moved or stored when it is not needed. This version has the white lid; a tan lid is also available.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625744609492,"sku":"CMP-56-1000","price":103.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7d845f47-4181-4620-90e8-78eb7602a00e.png?v=1788690758"},{"product_id":"flowskim-basket-and-handle-sp1070e-u3","title":"CMP FlowSkim Basket and Handle SP1070E, U3","description":"\u003cp\u003eThe CMP 27182-300-000 is the FlowSkim skimmer basket with an integrated handle, a replacement for the Hayward SPX1070E basket used in SP1070E and U3 skimmers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe handle does two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt gives you something to grab, so the basket lifts straight out and tips over cleanly instead of being fished at with fingertips. It is also hollow and set at an angle, which gives water a path through the middle of the basket once leaves have packed the sides. That keeps flow up to the pump when the basket is full rather than choking it off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e8 in. across the top, 6-1\/2 in. across the bottom and 5-3\/8 in. high. Measure the basket you are taking out if you are unsure which skimmer body you have.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625747362004,"sku":"CTM-251-0504","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a9f1a4e0-dbfe-4be4-9030-2bf032ee1c57.jpg?v=1788691376"},{"product_id":"powerclean-cover-o-ring","title":"CMP PowerClean Ultra\/Mini Lid O-Ring","description":"\u003cp\u003eThis is the genuine CMP lid o-ring for the PowerClean Ultra and PowerClean Mini in-line chlorinators, part number 26101-060-530.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring sits between the chlorinator lid and the body. It has to hold against system pressure with chlorine gas on the inside, which is a harder job than most pool seals face. When it hardens or flattens, water weeps from under the lid and chlorine odor collects around the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eShut down the pump and relieve pressure before opening the feeder. Clean the groove, fit the new ring, and coat it with a silicone based pool lubricant. Getting into the habit of checking the ring each time you add tabs is the simplest way to avoid a leak that starts mid season.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625772134612,"sku":"CTM-451-1008","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c70db515-59ab-4403-a79b-a62e432c4644.jpg?v=1788692052"},{"product_id":"deck-jet-adjustable","title":"CMP Natural Wonders Adjustable Deck Jet Assembly with Four Decorative Caps","description":"\u003cp\u003eThe CMP 25597-200-000 is the Natural Wonders adjustable deck jet assembly, supplied with four decorative caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA deck jet is a compact water feature set into the deck beside the pool. Fed from the return plumbing, it throws an arc of water out over the surface. It is one of the least involved ways to add movement and sound to a pool without changing the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable, and finished four ways\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the adjustable model, so the jet can be aimed after it is installed rather than being fixed at one angle. Four decorative caps come in the box, which lets the visible trim be matched to the deck. CMP also lists a non adjustable version of the same assembly, so check which one you are replacing before ordering.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625773641940,"sku":"CTM-27-0200","price":108.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/25597-200-000.jpg?v=1788692104"},{"product_id":"fns-plus-top-manifold-assembly","title":"CMP FNS Plus Top Manifold Assembly","description":"\u003cp\u003eThe CMP 25357-600-000 is a heavy duty top manifold assembly for Pentair FNS Plus DE swimming pool filters. It is a CMP built replacement for the OEM manifold, part number 59023700, and is also cross referenced as 192173.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the top manifold does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn an FNS Plus, the DE grids hang from the top manifold and all the filtered water leaves the tank through it. When the manifold cracks or the grid ports wear, DE gets past the grids and back into the pool, and the filter never quite clears the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the manifold assembly on its own. Grids, the standpipe and the clamp hardware are separate parts, so open the tank and check the grids while the manifold is out. If they are torn or thin, replacing them at the same time saves a second teardown.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625791008980,"sku":"CTM-051-1253","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4f451cea-38ce-44c7-b119-caac49439c88.jpg?v=1788700168"},{"product_id":"standard-size-mixing-de-gas-vessel-for-aop-25","title":"CMP Del Ozone Standard Size Mixing De-Gas Vessel for AOP-S 25","description":"\u003cp\u003eThe CMP Del Ozone MDV-10-08 is the standard size mixing de-gas vessel for the AOP 25 ozone system, sized for pools up to 25,000 gallons. It is the piece that finishes an AOP installation properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the vessel is there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn ozone generator always produces more gas than the water can absorb in one pass. Without somewhere for that surplus to go, it comes straight back out of the returns as visible, audible bubbles, and it collects under covers and inside plumbing where it slowly attacks the material. The vessel separates that off gas from the water and routes it into a granulated activated carbon cartridge, which destroys it. Because the surplus is handled safely, an oversized generator can be run deliberately for a wider disinfection margin and a bigger cut in chemical use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe vessel is wall mount only. It plumbs with 3\/4 inch PVC sockets, the outlet goes in after the heater, and the injector is supplied with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the standard size unit for the AOP 25. It is not for use with the Next Gen AOP25, and the larger AOP 50 takes the XL version of the vessel instead.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625792352468,"sku":"DEL-451-1008","price":297.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_adb98bd6-80f3-4e6f-ad6d-2a4f5d39a869.jpg?v=1788700224"},{"product_id":"brilliant-wonders-48-led-waterfall-back-port-6-lip-100-ft-cord-white-25677-430-000","title":"CMP Brilliant Wonders 48\" LED Waterfall, Back Port, 6\" Lip, 100 Ft. Cord, White","description":"\u003cp\u003eThe CMP Brilliant Wonders 48 inch LED waterfall gives a pool a wide, lit sheet of falling water. This version is white, has a back port for the water supply, a 6 inch lip and a 100 foot cord, and is CMP part number 25677-430-000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the light looks different\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost lit waterfalls push light in from outside using fiber optics. CMP builds the LED strip into the unit instead, which puts the light source as close to the water as it can physically be. The result is a brighter, more even glow through the sheet rather than a bright spot at one end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlumbing and wiring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe back port means the water line comes in from behind the unit, which suits a wall that is plumbed from the back side. The 6 inch lip determines how far the sheet is thrown clear of the wall. On the electrical side, the 100 foot cord gives real freedom in siting the unit relative to the equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBrilliant Wonders waterfalls now include Smart Sync control technology, the latest addition to a line already built around getting the best possible LED waterfall effect.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625849106644,"sku":"CTM-27-3228","price":1169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c1ab772f-f719-4b1f-bd13-ddd79b7e36f1.jpg?v=1788701572"},{"product_id":"powerclean-ultra-off-line-chlorinator-clear-glass-lid","title":"CMP PowerClean Ultra Off-Line Chlorinator, Clear Glass Lid","description":"\u003cp\u003eThe CMP PowerClean Ultra is an off-line tablet chlorinator for residential in ground pools, and this model is the version fitted with the clear glass lid. Part number 25280-300-000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the glass lid\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChlorinator lids live in constant contact with tablet vapor. A plastic lid clouds and fades until you cannot see the tablet level any more. The glass lid on this model does not, so the feeder stays easy to check and easy to service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCapacity and plumbing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt treats pools from 5,000 to 50,000 gallons and holds twelve 3 in tablets or 5 lb of 1 in tablets. The plumbing size is 2 in, and unions are supplied in both 1.5 in and 2 in for a quick disconnect. All of the piping runs inside the unit, which removes the outside joints that leak on other designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSetting the feed rate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA built in flow indicator shows what the feeder is doing while you turn the dial, and the dial closes to a full 100 percent shut off when you want to stop feeding entirely. A bottom drain plug lets you empty the body for service or winterizing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling off-line\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOff-line means it mounts alongside existing equipment rather than replacing a section of the return line. The base, two mounting brackets and the tubing come with it, along with 3\/4 in fittings if you would rather hard plumb the connections.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626212143316,"sku":"CTM-45-4004","price":212.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ec2a8c18-150a-460f-9032-ed2d52636298.jpg?v=1788706205"},{"product_id":"cmp-25357-850-000-heavy-duty-j-style-top-manifold-for-cv340-cv460-cv580-cl340-cl460-cl580-cartridge-filters-4-box","title":"CMP Heavy Duty J-Style Top Manifold for CV340, CV460, CV580, CL340, CL460, CL580 Cartridge Filters","description":"\u003cp\u003eThe CMP 25357-850-000 is a heavy duty J-style top manifold for the CV340, CV460, CV580, CL340, CL460 and CL580 cartridge filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the top manifold does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt caps the cartridge assembly and holds every element in its correct position against the flow. All the water that leaves the filter passes through it, and it takes the mechanical load of the cartridges pressing up under pressure every time the pump starts. That combination is why manifolds crack and distort with age.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe heavy duty version\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the heavier specification part in the J-style pattern, which is the sensible choice when the one you are pulling out has already failed once. It goes back in the same place as the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a bad manifold\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCartridges that sit crooked or will not seat, water that turns cloudy again days after a filter clean, and visible cracks around the ports when the lid comes off. Any of those means the manifold is letting dirty water past the elements rather than through them.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626224726228,"sku":"CTM-051-5030","price":98.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_85da511a-e222-4df2-809c-b5ac90d4d00f.jpg?v=1788706538"},{"product_id":"skimmer-basket","title":"CMP Kafko\/Equator Skimmer Basket","description":"\u003cp\u003eThe CMP 27180-163-000 is a replacement skimmer basket for Kafko and Equator skimmers, made to fit in place of the Kafko 19-0163-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIdentifying your basket\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe quickest check is the top rim. The basket this part replaces normally carries the number 1006 molded into the rim, so lift yours out and look before ordering. The body measures 6-1\/2 inches tall with 6-3\/4 inches across one end and 7-1\/2 inches across the other. Our sources disagree on which of those measurements is the top and which is the bottom, so measure both ends of the old basket and match the pair rather than a single figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy not run without one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket is the last barrier before the pump. When it cracks or the rim breaks away, leaves pass straight through, and what would have been a basket change turns into a clogged impeller, a lost prime or a burnt out seal. Baskets are the cheapest part in the entire circulation loop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLife expectancy\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSun and cold both work on a skimmer basket. Most crack at the rim or at the handle first, and by then the plastic is brittle everywhere. If yours has gone that way, replace it rather than nursing it through another season.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626224857300,"sku":"CTM-251-3018","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_76c91bea-7a5b-476f-b001-510d697dc950.jpg?v=1788706543"},{"product_id":"cmp-powerclean-salt-ultra-winterizing-cell-cap-kit-52000-120-12","title":"CMP PowerClean Salt Ultra Winterizing Cell Cap Kit","description":"\u003cp\u003eThis is the CMP winterizing cell cap kit for the PowerClean Salt Ultra. It caps the cell housing when the salt cell is pulled and the system is closed for the season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAt closing, the cell comes out and the housing has to be sealed rather than left open through the winter. This kit is the factory way to do that on a PowerClean Salt Ultra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source lists this kit both as 52000-120-120 and as 52000-120-12. Both point to the same CMP winterizing cell cap kit for the PowerClean Salt Ultra.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626277646548,"sku":"CTM-27-0021","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cd0ab6f9-b3ce-4284-8dbc-b0a4ca52f464.jpg?v=1788707570"},{"product_id":"del-ozone-50-ozone-generator-up-to-50k-gallon-pools","title":"CMP DEL Ozone 50 Ozone Generator, up to 50k Gallon Pools","description":"\u003cp\u003eThe DEL Ozone 50, CMP part EC-20, is an ozone generator for pools from 15,000 to 50,000 gallons. It uses DEL Advanced Plasma Gap technology, and it was previously sold as the Eclipse 20 before CMP brought the DEL Ozone range into its own line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ozone does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOzone is three oxygen atoms rather than the two we breathe, and the third is weakly bound. That loose atom breaks away and oxidizes what it meets, which is how ozone deals with pathogens, microorganisms and both organic and inorganic contaminants in the water. CMP rates the system to destroy 99.9 percent of viruses and bacteria, to reduce chemical requirements by 60 to 90 percent, and to remove eye and skin irritants from the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits into the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe generator is wall mounted at the equipment pad and connects to the pool timer. Ozone is injected into the return line after the filter and heater through an injector manifold, which is a separate item. An MDV mixing degas vessel kit is also available separately for installations where you want to be certain no ozone bubbles reach the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications worth checking\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe unit runs on 120 or 240 volts at 50 or 60Hz, drawing 0.2 amps and 24 watts. Ozone output is 0.5 grams per hour with an air flow of 15 scfh. The powdercoated galvannealed steel enclosure measures 14.1 inches high by 7.8 inches wide by 3.2 inches deep, and the operating temperature range is 30 to 120 degrees F.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626292555988,"sku":"DEL-45-1020","price":910.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ca43b66b-862c-4a02-9b55-e688ddd18518.png?v=1788707732"},{"product_id":"uv-c50-uv-sanitizer-up-to-50k-gallon-pools","title":"CMP DEL UV-C 50 UV Sanitizer, up to 50k Gallon Pools","description":"\u003cp\u003eThe DEL UV-C 50 is a germicidal ultraviolet sanitizer for pools up to 50,000 gallons. Pool water passes through a single self contained housing where a UV-C lamp tuned to 254 nanometers treats it at flow rates up to 100 GPM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat UV-C does to pool water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUV-C light breaks apart the DNA and RNA of bacteria, viruses, cysts and protozoa as they pass the lamp, which inactivates them. That includes Cryptosporidium and Giardia, the organisms that resist ordinary chlorine levels. The same energy destroys the organic matter swimmers bring into the water, so fewer chlorine by-products form, chloramines break down, and the chemical smell and eye irritation people blame on chlorine go away.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for a single unit install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 100 GPM housing is sized so one unit covers most residential pools, and because UV-C makes no ozone there is no de-gas vessel or injector manifold to plumb. The electronic ballast runs on either 120 or 240 volts, with integrated fault protection that prevents start-up if a lamp problem is detected, and a pre-heat design that extends lamp life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA green LED on the cover confirms the unit has power and is switched on, and a cover interlock cuts that power when the cover comes off. The ventilated glow ring gives visual confirmation that the lamps are lit while letting air in and keeping moisture away from the ballast, and a heat shield protects the cover, secures the lamp connections and keeps moisture off them. A built in valve with an internally shaped endcap drains the housing completely for winterizing. The unit can also be paired with a DEL ozone generator for advanced oxidation.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626371035348,"sku":"DEL-45-1024","price":955.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a1e10cab-d762-415a-83b3-cdf9ad5adc0d.jpg?v=1788709410"},{"product_id":"skimmer-basket-sp1082ca-generic","title":"CMP Hayward SP1082CA Replacement Skimmer Basket","description":"\u003cp\u003eThis is the CMP 27180-152-000 skimmer basket, a generic replacement for the Hayward SP1082CA. It fits the Hayward 1082, 1083, 1084 and 1085 model skimmers, and is also referenced under the number B-152.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShape and size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket is cylindrical from top to bottom, with a lip at the rim that makes it slightly wider at the top than at the base. The source data carries two sets of measurements for it. One gives a 7 inch top, 5 inch height and 6-1\/2 inch bottom. The other gives 7-3\/8 inch top, 5-1\/8 inch height and 6-5\/8 inch bottom. Both are listed in the specifications so you can measure your old basket against them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric, and what that means\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a CMP made basket rather than the Hayward original. It substitutes for the OEM part in the same skimmers, but the color and the handle style may vary from what came out. If matching the original exactly matters to you, the genuine Hayward basket is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy baskets get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer baskets live in sun and chlorinated water and go brittle over a few seasons. Once one cracks, leaves and grit pass straight through to the pump basket and then the impeller, so a split basket is worth changing as soon as it shows.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626381193428,"sku":"SPG-601-0152","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_686691a3-59c8-4f61-bbf4-3bf7cc451669.jpg?v=1788709517"},{"product_id":"cmp-25506-324-100-black-cover-and-frame-for-32-channel-main-drain","title":"CMP Black Cover and Frame for 32\" Channel Main Drain","description":"\u003cp\u003eThis is the CMP 25506-324-100, the black cover and frame for the 32 in channel main drain. It is supplied as the pair, the grate together with the frame it seats into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace both\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe frame is what holds the cover flat and secure in the floor. If the frame has been damaged when the old cover was removed, or has moved in the plaster, fitting a new cover into it will not sit right. Replacing both puts the assembly back to a known state.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor options\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the black version. The same 32 in channel drain cover and frame is made in white and in gray if a different floor color is a better match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA safety part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMain drain covers are not decorative. A cracked, loose or missing cover should be replaced before anyone swims.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626478842068,"sku":"CTM-251-3021","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2729db5d-7622-43a1-a133-338b2a50d5ed.png?v=1788710699"},{"product_id":"cmp-spa-master-25580-090-000-2-1-2-white-gunite-jet-body-with-niche","title":"CMP Spa Master 2-1\/2\" White Gunite Jet Body with Niche","description":"\u003cp\u003eThe CMP Spa Master 25580-090-000 is a 2-1\/2 inch white gunite jet body with niche. It is the rough in half of a spa jet, the part that gets plumbed and set into the shell during construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody and niche\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body carries the water and air connections and locates the jet in the wall. The niche is the recess that the finished jet internal seats into after the shell is plastered. Having both as one molded part means the geometry is right without any field fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGunite specific\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is made to be poured into gunite. Fiberglass and vinyl liner pools use different bodies, so match the body to the shell type before ordering. The internals that complete the jet are ordered separately, which is normal: bodies go in during construction and internals go in at the end.\u003c\/p\u003e\u003cp\u003eIt is supplied in white, in the 2-1\/2 inch size.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626488312020,"sku":"CTM-25-1011","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_81e68bb6-f150-4a52-9523-78567397029e.jpg?v=1788710877"},{"product_id":"spa-light-adapter-repair-ring","title":"CMP Spa Light Adapter Repair Ring","description":"\u003cp\u003eThe CMP 25549-540-000 is a stainless steel adapter repair ring for a light niche whose mounting points have stripped or broken. It measures 5.5 in. across.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring retrofits into the existing niche. Three allen screws anchor it against the inside wall, giving the light a fresh set of mounting points without replacing the niche itself. A new bonding lug comes as part of the ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalled with the light in place\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring is built to detach for the light cord. That is the detail that matters on the job, because it means the repair can be made without pulling the light and its cord back out of the conduit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed as the spa version and CMP offers a pool version separately, while the product description supplied with this part uses the pool wording. Measure your niche against the 5.5 in. ring before ordering so you get the right one of the two.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626507972820,"sku":"CTM-301-1007","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d0861c2e-6013-4a74-95a5-7749c9c624a5.jpg?v=1788711089"},{"product_id":"ig-v-l-light-sealing-ring-kit-chrome","title":"CMP Inground Vinyl Light Sealing Ring Kit, Chrome","description":"\u003cp\u003eThe CMP 25549-100-000 is a light sealing ring kit in chrome, made for inground vinyl liner pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the seal exists\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA vinyl liner is a continuous waterproof membrane, and every fitting that passes through it is a deliberate hole. The light niche is one of them. The sealing ring clamps the cut edge of the liner tight against the face of the niche, sandwiching it so water stays in the pool instead of finding its way behind the liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSeals harden with age, sun and chemistry. Once the ring cracks or the gasket flattens out, the joint starts to weep. That shows up as steady water loss that carries on with the pump off, and sometimes as the liner pulling or wrinkling near the light. Because a leak behind the liner can wash out the base material, it is worth chasing early rather than topping the pool up all season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis version is chrome, which gives a bright metallic trim at the light rather than the plain white of a standard kit.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626576785620,"sku":"CTM-301-1018","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5ac37d39-167d-421f-bcda-a0e0da01122f.jpg?v=1788712634"},{"product_id":"jet-array-inline","title":"CMP In-Line Jet Array","description":"\u003cp\u003eThe CMP 23308-930-000 is an in-line jet array from Custom Molded Products. It is ordered by part number, and matching that number is the surest way to get an array that drops into the same place as the one coming out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn-line versus mounted\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe in-line configuration sits within the plumbing run itself. That matters when you are replacing an existing array, because the fitting has to line up with pipework that is already in the ground or already built into the shell.\u003c\/p\u003e\u003cp\u003eCustom Molded Products has supplied fittings to the pool and spa trade for decades, and CMP part numbers are carried across their catalog, so the 23308-930-000 designation is the reliable identifier here.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626580324564,"sku":"CTM-85-301","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_42aacfa0-0c5a-49ae-9ae6-02afd6313803.jpg?v=1788712664"},{"product_id":"del-ozone-25-ozone-generator-up-to-25k-gallon-pools","title":"CMP DEL Ozone 25, Ozone Generator, up to 25k Gallon Pools","description":"\u003cp\u003eThe DEL Ozone 25 is an ozone generator for residential pools from 7,000 to 25,000 gallons, sold by CMP under part number EC-10. It uses the DEL Advanced Plasma Gap design and was previously offered as the Eclipse 10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ozone does in a pool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOzone is oxygen in a three atom form. That third atom is loosely held, and it breaks away to oxidize contaminants in the water as they pass through the system. Because ozone does its work inside the plumbing and does not persist in the pool, it is designed to run alongside a residual sanitizer rather than instead of one. DEL rates the arrangement at a 60 to 90 percent reduction in chemical requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe unit runs on 120 or 240 volts at 50 or 60 Hz, drawing 0.1 amps and 12 watts. Ozone output is 0.25 grams per hour at an air flow of 15 scfh, and the operating range is 30 to 120 degrees F. The powdercoated galvannealed steel enclosure measures 14.1 inches high by 7.8 wide by 3.2 deep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe generator wall mounts and ties into the pool timer so it runs with the circulation pump. Ozone is fed into the return line through an injector manifold placed after the filter and heater. The manifold is a separate item, as is the mixing degas vessel some installers add to keep ozone out of the returns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA note on branding\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCMP acquired DEL Ozone and brought the line into its own catalog, so packaging and labels on current stock carry CMP branding even where older references show DEL.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626700517588,"sku":"DEL-45-1010","price":638.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5849145d-1c0d-4bde-a414-7cc4c495328d.png?v=1788713816"},{"product_id":"3-4-male-x-3-4-slip-union","title":"CMP 3\/4\" Male x 3\/4\" Slip Union","description":"\u003cp\u003eThe CMP 21063-750-000 is a 3\/4 in. union with a male thread on one end and a slip socket on the other. It is the fitting most often used when plumbing a booster pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA booster pump comes off the pad more often than most equipment: for service, for storage and for winterizing. Plumbed with unions, that is a two minute job with a wrench. Plumbed solid, it means cutting the pipe and gluing it back every single time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe male thread goes into the pump port and the slip socket glues to 3\/4 in. pipe. Check the port sizes on your own pump before ordering, and look at whether the install needs a union on both the suction and the discharge side.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626825625812,"sku":"CTM-56-2006","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b0be2bc5-8ad2-4f13-a49a-f581f98640d7.jpg?v=1788715522"},{"product_id":"cmp-brilliant-wonders-25677-330-000-36-white-led-waterfall-with-back-port-and-100-cord","title":"CMP Brilliant Wonders 36 in. White LED Waterfall with Back Port and 100' Cord","description":"\u003cp\u003eThe CMP Brilliant Wonders 25677-330-000 is a 36 inch white LED waterfall with a back port connection and a 100 foot cord. It produces a wide sheet of water and lights that sheet from inside the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe light is part of the waterfall\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe LED strip is built into the housing rather than added as a separate fixture aimed at the water. That means one item to install and one thing to power, and the light lines up with the sheet by design instead of by aiming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService and plumbing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe LED strip can be reached from the front of the unit, so servicing it does not mean opening up the wall behind the waterfall. Water enters through the back port, which suits an installation where the pipe is run from behind the wall or raised bond beam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDay and night\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn daylight it works as a plain sheet waterfall. After dark the built in white LED turns the same sheet into the lit feature of that wall.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626866389204,"sku":"CTM-27-3223","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_97d50a2d-0f57-4f3a-b437-516b70c4a7c5.jpg?v=1788716039"},{"product_id":"cmp-21063-350-000-superflo-pump-union-kit","title":"CMP Replacement SuperFlo Pump Union Kit","description":"\u003cp\u003eThe CMP 21063-350-000 is the replacement union kit for Pentair SuperFlo pumps. The unions are the threaded connections that join the pump to the suction and return plumbing so it can be disconnected without cutting pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThey take the load every time the pump is taken out for service, and they are the joint most likely to start weeping as a pump ages. Once the sealing face is scored or the nut has been over tightened, tightening it further makes the leak worse rather than better. New union hardware is the repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit goes on easily while the pump is already broken loose for a shaft seal, a lid o-ring or a basket change, so it is worth adding to that job rather than pulling the plumbing apart twice.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626994381012,"sku":"CTM-56-2009","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ec33e0dc-d57e-4115-a5db-649593500a1b.jpg?v=1788718866"},{"product_id":"spamaster-2in-insider-jetintdir-ss-wht","title":"CMP SpaMaster 2\" Insider Jet Internal, Directional, Stainless Steel, White","description":"\u003cp\u003eThe CMP 25591-110-000 is a SpaMaster 2 inch Insider jet internal, supplied in the directional stainless steel and white configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat an internal is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wall fitting body is glued into the shell and stays there. The internal is the visible part that drops into it and does the work of shaping the stream. Replacing an internal is a job you do by hand at the wall, with no plumbing to touch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJet internals are matched to their bodies and to the size of the jet, so ordering to the part number is the only reliable way to buy. This listing is the 2 inch directional SpaMaster Insider, part 25591-110-000.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627004440788,"sku":"CTM-85-0118","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_61667802-1a50-48de-847d-16dc7a89830e.jpg?v=1788718962"},{"product_id":"pvc-2-union-slip-by-slip","title":"SuperPro PVC 2\" Union, Slip by Slip","description":"\u003cp\u003eThe SuperPro 21049-200-000 is a 2 inch PVC union with slip connections on both sides and a self aligning design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions matter on a pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery piece of equipment that will eventually need pulling should sit between unions. When that day comes, the nuts break loose and the gear lifts out. Without them, the same job means cutting pipe, then gluing in couplings to put it back, and the pad slowly gets shorter every time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSelf aligning\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJoining two runs that are already glued in place rarely leaves them perfectly square to each other. The self aligning design lets the halves seat anyway, which is the difference between a union that pulls up tight and one that weeps no matter how hard you crank the nut.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627005620436,"sku":"SPG-56-0003","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5776e7c5-4823-4951-a0f5-fede6d7b0ede.png?v=1788718979"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/cmp.oembed?page=2","provider":"Active Pool Supply","version":"1.0","type":"link"}