{"title":"Compool Parts","description":"\u003cp\u003eCompool parts at Active Pool Supply, genuine OEM and quality aftermarket.\u003c\/p\u003e","products":[{"product_id":"circuit-board-f-lx80-10688","title":"Pentair Circuit Board for ComPool LX80 Commercial Control Power Centers and RF","description":"\u003cp\u003eThe Pentair PCLX80 is the replacement circuit board for ComPool LX80 commercial control power centers and RF receivers. It carries the ComPool number 10688 and is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoard level repair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSwapping the board keeps the existing LX80 enclosure, transformer and field wiring in place, which is a much smaller job than replacing the control center. Before ordering, confirm the unit has incoming power and that the transformer is producing output; a failed transformer presents the same way as a failed board, and the transformer assembly is a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eListed for the ComPool LX80 power center and RF receiver. Check the model label on your unit before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624993468628,"sku":"COM-301-2690","price":558.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/circuit-board-for-compool-lx80-commercial-control-power-centers-and-rf--PentairPCLX80.jpg?v=1788661526"},{"product_id":"valve-actuator-24vac-for-3-way-valves","title":"Pentair OEM Replacement Valve Actuator, 24 VAC for 3-Way Valves","description":"\u003cp\u003eThe Pentair CVA-24, part 263045, is a 24 VAC valve actuator for 2-way and 3-way diverter valves from Compool, Jandy and Ortega. It rotates 180 degrees in either direction to move the valve to the position an IntelliTouch, EasyTouch or Compool automation system calls for, and it comes with a 25 ft. 3-wire cable already attached.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRuns on automation, or by hand\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe actuator is fully bi-directional and offers multiple valve positions. If the control system goes down, it can be adjusted manually, so a failed panel does not strand the valve in the wrong place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for the pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe enclosure is corrosion-proof for poolside and weather exposed installs, and the unit is UL listed and ETL recognized. Rated 24 VAC, 50\/60 Hz, 0.65 amp.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625023254740,"sku":"COM-30-699","price":242.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ad6c0f7e-2e71-4483-8dae-03afe3c32274.jpg?v=1788662626"},{"product_id":"shut-off-switch-with-alarm","title":"Pentair Double Gang Plate Shut-Off Switch with Alarm for ComPool Pool and Spa","description":"\u003cp\u003eThe Pentair ESO2 is a double gang plate shut off switch with an audible alarm, made for ComPool pool and spa control systems. It is the genuine Pentair replacement for the original switch assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA shut off switch is the manual point where power to the controlled equipment stops. This one adds an alarm, so when the switch is thrown the change is heard as well as acted on. That matters on a pool and spa system where the equipment is out of sight of the switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe switch comes on a double gang plate, matching the opening the original occupied, so it goes back in the same place with no rework of the panel. Wiring on pool and spa control systems should be done with the power off, and by an electrician where local rules require it.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625767416020,"sku":"COM-30-6383","price":332.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/double-gang-plate-shut-off-switch-with-alarm-for-compool-pool-and-spa--PentairESO2.jpg?v=1788692035"},{"product_id":"xfmr-assembly-w-3-circut-brkr","title":"Pentair Transformer Assembly with 3 Circuit Breaker for CP3800 Family ComPool","description":"\u003cp\u003eThe Pentair XFM3BK is the transformer assembly with 3 circuit breaker for CP3800 family ComPool pool and spa automation control systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt sits in the power section of the ComPool enclosure, supplying the control system and carrying the breakers that protect the circuits it feeds. Replacing the assembly is the repair path when the transformer section of an installed CP3800 family panel has failed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is line voltage equipment inside an automation panel. Have a qualified pool electrician or service technician fit it, with the power off at the breaker.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625791041748,"sku":"COM-30-725","price":261.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/transformer-assembly-with-3-circuit-breaker-for-cp3800-family-compool-PentairXFM3BK.jpg?v=1788700172"},{"product_id":"temperature-sensor-linear","title":"Pentair Genuine OEM Linear Temperature Sensor","description":"\u003cp\u003eThe Pentair TS5L is the linear temperature sensor used by Compool and LX80 commercial pool and spa automation control systems. It is the genuine Pentair replacement and comes with red and green wires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery automation decision that depends on temperature starts with this sensor. The controller reads the sensor, compares it to a setpoint and calls for heat or stands down. When the sensor drifts or fails, the controller acts on a number that is not real, which can leave a heater running when it should not or refusing to fire when it should.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm you need the linear sensor. Sensor curves are not interchangeable, and this part is specified for the Compool and LX80 platforms.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625811161300,"sku":"COM-301-4838","price":93.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/red-and-green-wires-linear-temperature-sensor-for-compool-solar-and-water-PentairTS5L.jpg?v=1788700410"},{"product_id":"diverter-2-2-3-way-compool-diverter-valves","title":"Pentair Diverter, 2\" 2\/3 Way Compool Diverter Valves","description":"\u003cp\u003eThe Pentair 270056 is the replacement diverter assembly for Compool diverter valves. It is the genuine Pentair part and serves both 2 way and 3 way valve bodies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the diverter is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside a diverter valve, the diverter is the piece that swings on the stem and covers a port. Everything else in the valve body is static. That makes the diverter the part that wears, and on a valve turned daily, it is the reason a valve starts letting water past a port it is supposed to close.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part is listed as the 2 in. diverter, and the product description covers 2 in. and 2.5 in. diverter valves. Both readings are carried here rather than picking one. If your valve is the larger size, measure the body and compare it against the old diverter before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve cover comes off, the old diverter lifts out and the new one drops in. There is no cutting and the plumbing is not disturbed.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626100666580,"sku":"COM-561-1778","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_afcbd08f-0dcb-4502-986e-b64fe0061d46.png?v=1788704731"},{"product_id":"dpst-20-amp-relay-kit","title":"Pentair Genuine OEM DPST 20 Amp Relay Kit","description":"\u003cp\u003eThe Pentair RLYLX is a DPST 20 amp power relay kit for Compool pool and spa automation control systems. It is the genuine Pentair part, supplied as a kit rather than as a loose relay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the relay does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn automation panel is a set of low voltage decisions driving high voltage loads. The relay is what bridges the two: the controller calls for the pump, the heater or the lights, and the relay physically closes the contacts that power them. Because it is mechanical, it is the part of the panel that wears. Contacts pit, coils fail, and one circuit stops responding while everything else in the system keeps working.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDPST and the 20 amp rating\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDouble pole, single throw means both legs of the circuit are switched together. Pentair rates it at 20 amperes and lists it as the additional power relay replacement kit, so the same part covers replacing a relay that has failed and adding a switched circuit to an existing Compool panel.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627721699540,"sku":"COM-301-5413","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c92ae74c-3a70-4753-a660-0ef3df7c058f.png?v=1788727268"},{"product_id":"o-ring-2-151-diverter-valve","title":"Pentair O-Ring #2-151 Diverter Valve","description":"\u003cp\u003ePentair 51016200 is the replacement o-ring for the Pac-Fab and ComPool diverter valves in both the 1-1\/2 inch and 2 inch sizes, and it serves the 2 way and 3 way versions alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring sits between the valve cover and the valve body. It is the only thing holding pressure at that joint, so when it hardens, flattens or takes a set from years of chlorine and heat, water starts to weep out around the lid. Owners often blame a cracked body when a two dollar seal is the real cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacturer information for this part is not consistent about the size designation. The product name calls it #2-151 and the description calls it #2-152, though both refer to Pentair part number 51016200. Compare the new ring against the old one before assembly, and lubricate it lightly with a silicone pool lubricant so it seats without pinching.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628746518740,"sku":"AMP-061-1122","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/pentair_51016200.jpg?v=1788749647"},{"product_id":"actuator-cord-only-3-prong","title":"Pentair Actuator Cord Only, 3-Prong","description":"\u003cp\u003eThe Pentair 8691030 is a three prong actuator cord, sold as the cable on its own. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCord only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the lead, not the actuator. Valve actuators sit out on the pad in weather, and the cable is what usually goes first: sun cracks the jacket, a trimmer nicks it, or an animal chews through it. When the actuator itself is still good, replacing the cord costs a fraction of replacing the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur source material has very little on this part beyond the part number and the connector. The product image is described as a cable assembly for Compool CVA-24 pool and spa automation. Automation cords are not interchangeable between families, so match the three prong plug and the lead you are removing against this one before you buy. If the actuator hums but the valve will not turn, or nothing happens at all with a sound cable, the fault is in the actuator rather than the cord.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628953972948,"sku":"COM-301-2683","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/replacement-cable-assembly-for-compool-s-cva24-pool-and-spa-automatic-systems-Pentair8691030.jpg?v=1788758476"},{"product_id":"transformer-ass-lx20-30-36-80","title":"Pentair Transformer Assembly for ComPool LX20, LX30, LX36 and LX80 Control Systems","description":"\u003cp\u003eThe Pentair XFM1BK is the replacement transformer assembly for the ComPool LX20, LX30, LX36 and LX80 pool and spa control systems. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA dead ComPool panel with a live breaker points straight at the power supply side. No display, no relay clicks, nothing at all from a system that was working. The transformer is the piece that turns incoming power into what the board and the relays run on, and when it goes, everything downstream of it goes quiet at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe transformer sits inside the control enclosure, which is fed with line voltage. Shut the supply breaker off before the cover comes off, photograph the wiring before anything is disconnected, and hand the job to a qualified electrician or service technician if working inside a live panel is not familiar ground. ComPool systems are long out of production, so a transformer is one of the repairs that keeps a working panel in service instead of forcing a full automation replacement.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629167816916,"sku":"COM-30-702","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/transformer-assembly-for-compool-lx203036-and-80-control-systems-PentairXFM1BK.jpg?v=1788760042"},{"product_id":"adpt-cva24t-to-ortega-2-vlv","title":"Pentair Genuine OEM Adapter Kit, 2\" CVA-24T to Ortega Valve","description":"\u003cp\u003eThe Pentair OVA2 is the genuine OEM adapter kit for mounting a CVA-24T valve actuator to a 2 inch Ortega valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it solves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eActuators and valves do not share a universal mounting pattern. When the valve on the pad is an Ortega and the actuator is a CVA-24T, the adapter is what lets the two work together instead of replacing the valve body to suit the actuator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the listing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe adapter kit only. The actuator is bought separately. Quote part number OVA2 when checking against your equipment, because adapter plates from different manufacturers look very similar.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633449775316,"sku":"COM-301-4836","price":98.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_56234fc5-28a2-405f-88b7-974984f82501.jpg?v=1788804801"},{"product_id":"timer-mechanical-24-hour","title":"Pentair 24-Hour Mechanical Timer for Comtrol, SwimMaster and ComPool, 24VAC","description":"\u003cp\u003eThe Pentair TMRLX is the 24-hour mechanical timer used in Comtrol, SwimMaster and ComPool pool and spa automation control systems. It runs on 24VAC and it is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA mechanical clock with a 24 hour dial, driven by the panel low voltage supply. It has no display and no programming; you read the dial and set the on and off points on it. That simplicity is why these timers stay in service for decades and why a replacement is worth fitting rather than replacing the whole panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy panels come back to life\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eComtrol and ComPool systems are long out of production, and when one stops running the pump on schedule the timer is a common cause. Fitting the correct 24VAC timer is far cheaper than an automation upgrade, and it keeps a working panel working.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633703825620,"sku":"COM-30-715","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/24-hour-mechanical-timer-for-comtrol-and-swimmaster-and-compool-24vac-PentairTMRLX.jpg?v=1788812122"},{"product_id":"diverter-valve-cover-oring-o-440-9","title":"SuperPro Diverter Valve Cover O-Ring","description":"\u003cp\u003eThe SuperPro O-440-9 is a replacement cover o-ring for diverter valves. It is listed as the cover seal for American 2 and 3 directional port valves, and also for Compool and Pac Fab port valve covers, the Polaris back up valve, Jandy valve covers and backwash valve covers and lids, and Waterway serviceable check valve and TruSeal covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCover seal, not diverter seal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the o-ring that sits between the valve body and the cover you unscrew to get at the diverter. It is a different part from the seals on the diverter itself, so if the valve is passing water between ports rather than leaking to the outside, this is not the part you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater weeping out from under the valve cover. Once an o-ring hardens or takes a permanent set in its groove, no amount of tightening will stop the leak. Clean the groove and the mating face, fit the new o-ring with a thin film of silicone based lubricant, and tighten the cover down evenly.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634260881620,"sku":"SPG-601-1273","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_18f7e3ac-5f13-4a31-9c9b-071b10154333.jpg?v=1788827860"},{"product_id":"handle-for-compool-valve","title":"Pentair Handle for Compool Valve, Black","description":"\u003cp\u003eThe Pentair 270028 is the replacement handle for Compool valves, in black. It is the genuine Pentair part and it is the handle alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the handle is what fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA diverter valve handle sits in direct sun for years while taking the twisting force needed to move a diverter that has stiffened up. The plastic goes brittle, and eventually it cracks at the stem or rounds out so it spins without moving the valve. The valve body and the diverter underneath are usually in perfectly good condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are buying\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the handle, not the valve. It is catalogued with the 1-1\/2 inch and 2 inch Compool diverter valve replacement parts, so check that your valve is a Compool before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48634373112020,"sku":"COM-561-1777","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0964af29-cd22-4a79-818f-b7b8ea4bf225.jpg?v=1788828688"},{"product_id":"cover-for-compool-valve","title":"Pentair Cover for Compool Valve","description":"\u003cp\u003eThe Pentair 270030 is the replacement cover for a Compool valve, the top that closes the valve body and carries the handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the top goes first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body of a diverter valve is buried in the plumbing and stays put for decades. The cover is the part that sits in the sun, gets stood on, and takes the twist every time somebody moves the handle. It cracks at a screw boss or splits across the top, and from then on the valve weeps at the lid or will not hold the setting you leave it at.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat to order with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplacing the cover means the valve body and its plumbing stay untouched, which is the reason to service a valve rather than cut it out. The diverter o-ring is a separate part, and since the valve has to come apart anyway, it is the sensible thing to change at the same time.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48634473021652,"sku":"COM-561-1785","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9522fd72-6fd8-4708-95b5-68c6f81e580f.jpg?v=1788831819"},{"product_id":"4-pos-plug-in-screw-terminal","title":"Pentair 4 Position Plug-In Screw Terminal for ComPool IntelliTouch","description":"\u003cp\u003eThe Pentair 8023304 is a four position plug-in screw terminal for ComPool and IntelliTouch pool and spa automatic control systems. The product photograph carries the part number 8023304Z, and both numbers are in the source data for this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA small terminal block that plugs onto a header inside the control panel. Field wiring lands under four screws on the block. Because the block unplugs, wiring can be made up off the board and pushed back into place, which is a good deal easier than working screws down inside an enclosure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomation panels sit outdoors for years. Moisture gets into the enclosure, terminals corrode, and a connection that is not tight will arc and burn the plastic around it. The usual symptom is an output or an accessory that has quietly stopped working while everything else in the panel is fine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCount the positions on the block you are removing. This is the four position version, and the panels use blocks in more than one size.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48634841366740,"sku":"COM-301-9001","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/4-position-plug-in-screw-terminal-for-compool-intellitouch--Pentair8023304.jpg?v=1788837906"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/compool-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}