{"title":"Diving Board Parts \u0026 Stands","description":"\u003cp\u003eShop diving board parts \u0026amp; stands at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"3-4-meter-steel-stand-for-12-board","title":"S.R. Smith 3\/4-Meter Steel Stand for 12' Board","description":"\u003cp\u003eThe S.R. Smith Steel Meter Stand is a commercial diving tower, and this is the 3\/4 meter height, part 70-209-512, sized for 10 ft and 12 ft boards. The line runs from 1\/2 meter to 1 meter, with the 3\/4 meter stand sitting in the middle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for commercial use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand is powder coated stainless steel, chosen for a long service life with little upkeep in a pool environment. It is intended for commercial pools that need a strong, durable stand, though S.R. Smith notes the 1\/2 meter size is also appropriate for residential pools where the board sees heavy use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you need alongside it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the stand only. Handrails are required on the 3\/4 and 1 meter stands and are sold separately, as are the board and the mounting kit. Board length is determined by the size and type of pool; the 12 ft Frontier III commercial board is a common pairing. Boards shown in the photos are for illustration.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48624880484564,"sku":"SRS-35-1091","price":3615.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3e0acb2c-52f7-4316-a3ca-3391265b54df.jpg?v=1788648892"},{"product_id":"s-r-smith-fc-200a-r-20-u-frame-fulcrum-cover","title":"S.R. Smith 20\" U-Frame Fulcrum Cover, FC-200A-R","description":"\u003cp\u003eThe S.R. Smith FC-200A-R is the genuine U-Frame fulcrum cover: a 20 in. length of heavy duty rubber that wraps the fulcrum tube where the diving board bears on the stand. It cushions the board, quiets the bounce and keeps the board from wearing against bare tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is sized for 1.90 in. OD tubing, the tube used on S.R. Smith U-Frame stands. Measure the outside diameter of your fulcrum tube before ordering to confirm the match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSun and repeated loading eventually crack or split the rubber, and a missing cover leaves the board sitting on metal. Replacing it is a small job that protects a much more expensive board and stand.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624959389908,"sku":"SRS-35-1737","price":63.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_acd0148f-1171-4252-b8f3-d1519c213eed.jpg?v=1788656523"},{"product_id":"cantilever-steel-jump-stand-w-jig-radiant-white","title":"S.R. Smith Cantilever Steel Jump Stand with Jig, Radiant White","description":"\u003cp\u003eThe S.R. Smith 69-209-001 is the cantilever steel jump stand, supplied with its mounting jig, in Radiant White. It is the base of an S.R. Smith jump system. The board and the spring assembly are separate purchases, so plan the complete system before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand is steel with a powder coat finish for corrosion resistance, and the hardware is stainless steel. The Radiant White color matches S.R. Smith boards and slides finished in the same color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoards\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand takes 6 ft. and 8 ft. boards. Choose the board and spring assembly that match the length you want and the pool depth envelope for your installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSalt pools\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith does not recommend this stand for salt water pools. Its Salt Pool Jump System is the salt option and can be retrofitted onto a cantilever jig like this one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShipping\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand ships by freight. Plan for curbside delivery.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48624968696020,"sku":"SRS-35-795","price":587.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_94474b89-757c-4786-bd10-041c4009e6f8.png?v=1788656892"},{"product_id":"6-white-606-656-spring-assy","title":"S.R. Smith 6' White Spring Assembly for 606 Cantilever Jump Stand","description":"\u003cp\u003eThe S.R. Smith 69-209-026 is the genuine white spring assembly for a 6 ft diving board mounted on the 606 cantilever jump stand. S.R. Smith also lists it for the 656 stand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe spring assembly is what gives a cantilever stand its bounce. When the board feels dead, sits low, or the spring shows corrosion or fatigue, the assembly should be replaced rather than repaired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm that your stand is a 606 or 656 and that your board is 6 ft. Spring assemblies are matched to board length, so an 8 ft board needs a different part.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48624997695700,"sku":"SRS-35-792","price":392.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_766a5cdb-12ac-4aac-be25-f42fa850f79a.jpg?v=1788661677"},{"product_id":"cantilever-steel-jump-stand-spring-assembly-complete-8-radiant-white","title":"S.R. Smith Cantilever Steel Jump Stand, Spring Assembly Complete 8', Radiant White","description":"\u003cp\u003eThe S.R. Smith 69-209-028 is the cantilever steel jump stand supplied as a complete spring assembly, sized for an 8 foot board and finished in Radiant White.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a jump stand does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand is the part bolted to the deck that carries the board and gives it its spring. A cantilever design reaches out over the water so the board has clean travel, and the spring assembly sets how the board loads and returns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the stand only. The diving board itself is a separate purchase and needs to match the 8 foot length. Because it is a steel deck structure, it moves as freight rather than parcel.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48625784520916,"sku":"SRS-35-793","price":641.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_262d7e3f-53a7-4ba2-8d7d-08f722d61b89.jpg?v=1788692245"},{"product_id":"1-meter-steel-stand-for-12-board","title":"S.R. Smith 1-Meter Steel Stand for 12' Board","description":"\u003cp\u003eThis is the S.R. Smith 1-meter steel diving stand, part 70-209-522, sized to accept 10' and 12' boards. It is the tallest of the three sizes in the steel meter stand range, which starts at 1\/2 meter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is built\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand is stainless steel with a powder coated finish. That combination is what lets it live outdoors at a pool edge for years with very little attention, which is why the range is specified for commercial installations that need a strong and durable diving tower. The same construction suits a residential pool where the board sees constant use and a lighter stand would not last.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing the board\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoard length is determined by the size and type of pool, not by the stand alone. The 1 meter stand will accept a 10' or a 12' board, and the pool dimensions and local requirements decide which of those is appropriate. Boards are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandrails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith requires handrails on both the 3\/4 meter and 1 meter stands. They are not included here and must be ordered separately, so budget for them as part of the installation rather than as an option. Any boards or handrails shown in the product images are there for illustration only.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48625785798868,"sku":"SRS-35-1001","price":4346.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_406b0bfd-fe74-4cdb-a80c-b70a03fff9a1.jpg?v=1788692436"},{"product_id":"3-4-meter-steel-stand-for-10-board","title":"S.R. Smith 3\/4-Meter Steel Stand for 10' Board","description":"\u003cp\u003eThe S.R. Smith 70-209-510 is a three quarter meter steel diving stand in powder coated stainless steel. It is sold as the stand alone, without a board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere the 3\/4 meter sits in the range\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith builds the steel meter stand in three heights, from 1\/2 meter through to 1 meter. The 3\/4 meter is the middle height. The whole range is aimed at commercial pools that need a strong, durable diving tower, and the shorter stands are also used on residential pools where the board sees a lot of activity.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoard length\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing pairs the stand with a 10 foot board. S.R. Smith also states that the 3\/4 meter stand accommodates 10 foot and 12 foot boards, so check the board you intend to mount before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStainless steel under a powder coat, built to last for years outdoors with minimal maintenance.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48626109350100,"sku":"SRS-35-1052","price":3327.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fb0f625d-7d39-4e7b-8d8c-194cc2d116d0.jpg?v=1788704923"},{"product_id":"18-commercial-mounting-kit","title":"S.R. Smith 18\" Commercial Mounting Kit","description":"\u003cp\u003eThe S.R. Smith 18\" commercial mounting kit, part 67-209-903-SS, is the hardware set for mounting a commercial diving board. It is supplied with .5 x 5\" carriage bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoard length matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith lists this kit for 10 ft and 12 ft boards only. Before ordering, confirm the length of the board it is going under, because a kit built for one board length is not interchangeable across the range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUse the factory hardware\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiving board mounting hardware carries repeated shock loading, so it is worth using the kit S.R. Smith specifies rather than assembling equivalents from a hardware store.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48626212077780,"sku":"SRS-351-4169","price":158.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0775817b-cdf3-4960-8173-b3a1431731fa.jpg?v=1788706201"},{"product_id":"6-flyte-deck-ii-jig-only-stainless-steel","title":"S.R. Smith 6' Flyte Deck II Jig Only, Stainless Steel","description":"\u003cp\u003eThe S.R. Smith 71-209-700-SS is the stainless steel jig for the 6 ft Flyte Deck II diving stand. It is supplied as the jig alone, without a base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the jig does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe jig is the piece the diving board bolts down to on top of the stand. It fixes where the board sits and transfers the load from every bounce into the base and the deck anchors, which is why it is stainless rather than plated steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm two things: that you need the jig on its own rather than a base with jig assembly, and that your stand is the 6 ft Flyte Deck II. Board length drives the hardware, and an 8 ft board takes different parts.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48626734072020,"sku":"SRS-351-949","price":138.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_684bcc4f-1a6e-4b23-aaec-9995c37199b5.jpg?v=1788714186"},{"product_id":"sr-smith-cantilever-606-608-spring-bolt-kit-stainless-steel","title":"S.R. Smith Cantilever 606\/608 Spring Bolt Kit, Stainless Steel","description":"\u003cp\u003eThis is the stainless steel spring bolt kit for S.R. Smith Cantilever 606 and 608 stands and Supreme 656 and 658 stands, part number 69-209-029-SS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit covers the whole spring bolt position rather than a single fastener. It holds a 5\/8 inch by 2-1\/4 inch stainless hex head bolt with its stainless hex nut, lock washer and flat washer, a 1\/2-13 by 3-1\/2 inch carriage bolt with a 1\/2 inch flat washer, three nylon washers in protector, square and round forms, a white rubber nut cap and a composite spring pad measuring 2-1\/4 inches square by 1\/8 inch thick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the whole set\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHardware at a diving stand lives in splash and sun, and the pieces wear at different rates. The nylon washers and the composite pad take the load and go first, but a corroded nut or a stretched bolt undoes the benefit of new pads. Changing the set puts the position back to factory condition in one visit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the model first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is specific to the Cantilever 606 and 608 and the Supreme 656 and 658. Confirm the stand model before ordering.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627217170644,"sku":"PSU-200896","price":79.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dffa0f7a-f066-4985-a72d-e66528511b62.png?v=1788720135"},{"product_id":"10-flyte-deck-ii-stand-w-jig-taupe","title":"S.R. Smith 10' Flyte-Deck II Stand with Jig, Taupe","description":"\u003cp\u003eThe Flyte-Deck II is S.R. Smith's best selling diving stand, and this is the 10 ft version in taupe, part number 70-209-74010, supplied with the jig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes and colors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith builds the Flyte-Deck II stand in three lengths, 6 ft, 8 ft and 10 ft, so the stand can be matched to the diving pool rather than the other way round. Seven designer colors are offered across the range, picked to sit quietly against backyard surroundings instead of standing out against them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe appeal of the Flyte-Deck II is that the sleek profile is not bought at the cost of strength. The published weight limit is 250 lbs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing covers the stand and its jig. The diving board itself is a separate purchase, so specify the board to match the 10 ft stand.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627245187284,"sku":"SRS-35-1135","price":791.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_082d0ae1-d98a-4e2e-b66f-a0cdcbc0d6a4.jpg?v=1788720293"},{"product_id":"606-608-nylon-base-tab-left","title":"S.R. Smith Cantilever 606-608 Dive Stand Nylon Tab Kit, Left and Right","description":"\u003cp\u003eThis is the S.R. Smith nylon tab kit for the Cantilever 606 and 608 dive stands, part number 05-620LR-R. The tab sits at the base of the stand, where the stand meets its deck mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLeft and right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe part number reads as the left and right set, and the product listing describes it that way. Our catalog name for the same number refers to the left base tab on its own, so the two records do not agree. If you need one specific side, contact us and we will confirm what is in the box before it ships.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it gets replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNylon tabs take load every time the board is used, and they sit in a spot that stays wet. A tab that has cracked, deformed or worn at the mounting holes should be changed rather than shimmed, because it is part of what keeps the stand seated on the deck.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627398443220,"sku":"SRS-351-1518","price":43.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3fd3bb59-977d-4578-a48d-0f817ca5fb90.png?v=1788723011"},{"product_id":"10-flyte-deck-ii-stand-w-jig-radiant-white","title":"S.R. Smith 10' Flyte-Deck II Stand with Jig, Radiant White","description":"\u003cp\u003eThe S.R. Smith 70-209-7402 is the 10 foot Flyte-Deck II diving board stand in Radiant White, supplied with its mounting jig. The Flyte-Deck II is S.R. Smith's best selling stand, built in three lengths so it can be matched to the diving pool it serves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing the stand\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlyte-Deck II stands come in 6, 8 and 10 foot lengths. The length determines where the board sits over the water, so it has to be chosen against the shape and depth of the diving end rather than by preference. This is the longest of the three.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe jig\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mounting jig ships with the stand. It sets the anchor positions in the deck so the stand goes down square and correctly spaced, which is the part of the installation that cannot be corrected afterward.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoard and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe board itself is a separate order, available with white or matching tread. S.R. Smith offers seven designer colors across the range, chosen so the equipment blends into the backyard rather than standing out. The Flyte-Deck II carries a 250 pound weight limit.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627405783252,"sku":"SRS-35-1053","price":775.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_30c4fea5-3f44-4900-b59e-01a188165c13.jpg?v=1788723090"},{"product_id":"8-flyte-deck-ii-stand-w-jig-radiant-white","title":"S.R. Smith 8' Flyte-Deck II Stand with Jig, Radiant White","description":"\u003cp\u003eThe S.R. Smith Flyte-Deck II is the stand that carries the diving board, and this is the 8 foot version in Radiant White, supplied with its jig. Part number 70-209-7382.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStand only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRead this part carefully before ordering: the board is not included. The Flyte-Deck II stand and the board are bought separately, which is what lets you match a board length and color to the stand and to the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith builds the Flyte-Deck II stand in 6, 8 and 10 foot lengths so it can be matched to the diving well. This listing is the 8 foot. The stand carries a 250 pound weight limit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShipping\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA diving stand is a large freight item. It ships by freight carrier rather than by parcel service.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627628212436,"sku":"SRS-35-1043","price":618.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_537200c3-b94f-479c-9003-5ed53e77aa07.jpg?v=1788725553"},{"product_id":"8-spring-assembly-salt-pool-pewter-gray","title":"S.R. Smith 8' Spring Assembly, Salt Pool, Pewter Gray","description":"\u003cp\u003eThe S.R. Smith 69-209-6820 is the 8 foot spring assembly for the Salt Pool Jump System, finished in pewter gray. It is the salt friendly version of the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for salt water decks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt pools are hard on diving stand hardware. Salt laden air around the deck attacks standard finishes and fasteners, and a stand that would last for years on a chlorine pool starts showing corrosion far sooner. The Salt Pool Jump System exists for that reason, and this spring assembly is the salt friendly part of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is and is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the spring assembly on its own. The diving board and the base are not part of it, so a complete installation needs those ordered separately. Confirm you are matching an 8 foot system and the pewter gray finish before ordering, since the assembly is built to board size and sold in more than one color.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627846807764,"sku":"SRS-35-0171","price":841.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b8e0e781-8e37-48b9-a461-a169878dcacf.jpg?v=1788728211"},{"product_id":"70-209-73621-flyte-deck-ii-stand-w-jig-6silver-gray","title":"S.R. Smith 6' Flyte-Deck II Stand with Jig, Silver Gray","description":"\u003cp\u003eThe S.R. Smith 70-209-73621 is the 6 foot Flyte-Deck II diving stand in silver gray, supplied with its jig. It is the stand and jig only. No diving board is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat ships\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo things: the stand itself and the mounting jig that goes with it. The jig is what sets the anchor positions in the deck, so having it in the same box matters on an installation where the concrete work and the stand go in together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering the board\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Flyte-Deck II board is bought on its own. If you are putting in a complete setup rather than replacing a damaged stand, plan on both purchases from the start so the board and the stand arrive together.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627902709972,"sku":"PSU-95138","price":597.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f8c94a46-d3e2-45f8-b3e2-5025bb705b07.jpg?v=1788729698"},{"product_id":"6-spring-assembly-salt-pool-radiant-white","title":"S.R. Smith 6' Spring Assembly, Salt Pool, Radiant White","description":"\u003cp\u003eThe S.R. Smith 69-209-662 is the 6 foot spring assembly in the salt pool build, finished in Radiant White. The diving board is not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe salt pool version\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith builds this assembly for pools sanitized with salt. If your pool runs a salt chlorine generator, this is the version to order rather than the standard assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are buying\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe spring assembly only, in the 6 foot size and the Radiant White finish. The diving board itself is a separate purchase, so match the board length to the assembly before you order either one.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627954090196,"sku":"SRS-35-0160","price":627.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cc4c6249-6d03-459b-ab73-2742e2d3b2a5.jpg?v=1788730886"},{"product_id":"8-flyte-deck-ii-jig-only-stainless-steel","title":"S.R. Smith 8' Flyte Deck II Jig Only, Stainless Steel","description":"\u003cp\u003eThis is the S.R. Smith 71-209-704-SS, the stainless steel jig for the 8' Flyte Deck II. It is sold on its own, so what arrives is the jig and nothing else.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are buying\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe listing covers the jig alone. If you are looking for a complete stand, or for the diving board that goes on it, those are separate items and this part will not stand in for either of them. Stainless steel is the material S.R. Smith specifies here, which is what you want on hardware that lives on a wet pool deck year round.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlyte Deck hardware is tied to the model and the length of the stand, so the safest check is the part number rather than the look of the piece. Confirm 71-209-704-SS against your existing hardware or your original paperwork, and confirm you have the 8 foot Flyte Deck II rather than another model in the range.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627968966868,"sku":"SRS-351-9815","price":137.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2f4118c5-180e-43c4-b866-eeab97bbb88c.jpg?v=1788731968"},{"product_id":"sr-smith-75-209-5868-ss-epoxy-kit-with-4-1-2-inch-mounting-bolts-for-cantilever-diving-board-stands","title":"S.R. Smith Epoxy Kit with (4) 1\/2 Inch Mounting Bolts for Cantilever Diving Board Stands","description":"\u003cp\u003eThis is the S.R. Smith 75-209-5868-SS epoxy kit, the anchoring hardware for a cantilever diving board stand. It contains epoxy resin, epoxy hardener and four 6\" x 1\/2\" stainless steel mounting bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cantilever stand carries every bit of load the board puts into the deck, so the bolts that hold it down are not general hardware. This kit supplies the four bolts and the two part epoxy together, matched to the stand by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich stands\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith lists the kit for its Cantilever stands and for the Salt Pool Jump System stands. Stainless steel is used for the bolts, which is the right choice around pool water and treated deck surfaces.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48628798193876,"sku":"SRS-351-4153","price":255.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/75-209-5868-SS.jpg?v=1788750857"},{"product_id":"18-u-style-diving-frame-049-marine-grade","title":"S.R. Smith 18\" U-Style Diving Frame, .049\" Marine Grade","description":"\u003cp\u003eThe S.R. Smith UF-18-101-MG is an 18 in. U-style diving frame in .049 in. marine grade. It is the stand only; the diving board is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a U-frame\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe U-frame is the simplest diving stand there is, which is exactly why it has stayed popular. There are no moving jump mechanisms to maintain and no adjustment to get wrong, and it costs less than the elaborate stands. For a first time diving board owner it is the sensible starting point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMarine grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis version is built to the .049 in. marine grade specification rather than the standard frame. Pool decks are a hard environment for metal, between the chlorine, the sun and the constant wet and dry cycling, so the heavier grade is worth having on a fixture that is bolted down for years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose a diving board rated for an 18 in. U-frame stand, and check your local pool code for the diving envelope required at the deep end. The frame anchors to the deck, so the mounting has to be laid out before the board goes on.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48628807499988,"sku":"SRS-35-2718","price":326.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c57de57a-53ff-422d-9163-c1b0fc6963bb.jpg?v=1788751965"},{"product_id":"sr-smith-75-209-5869-ss-epoxy-kit-with-3-5-8-inch-mounting-bolts-for-frontier-ii-diving-board-stands","title":"S.R. Smith Epoxy Kit With (3) 5\/8 Inch Mounting Bolts for Frontier II Diving Board Stands","description":"\u003cp\u003eThis is the S.R. Smith 75-209-5869-SS epoxy kit for Frontier II diving board stands. It supplies the epoxy and three 5\/8 inch mounting bolts used to anchor the stand to the pool deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA diving board stand only carries load safely if it is anchored properly. The bolts and the epoxy are what tie the stand into the deck, so this kit is part of the install rather than an optional extra.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck that your stand is a Frontier II and that you need the version with the SS part number suffix. The board and the stand itself are separate items.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48628809957588,"sku":"SRS-351-4154","price":401.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/75-209-5869-Ss.jpg?v=1788752139"},{"product_id":"s-r-smith-75-209-5876-epoxy-kit-with-3-bolt","title":"S.R. Smith Epoxy Kit With (3) 1\/2\" Bolts","description":"\u003cp\u003eThis is the S.R. Smith epoxy kit with three 1\/2 in. mounting bolts, used to anchor a Flyte Deck II diving board stand to the pool deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the kit does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand is only as solid as what holds it into the concrete. The kit supplies the anchoring epoxy along with the three 1\/2 in. bolts the mounting pattern uses, so the hardware and the bond come from the same source rather than being pieced together at the hardware store.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the anchor matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery bounce on the board goes through the stand and into those bolts, over and over, for years. That is the reason a diving stand is set in epoxy rather than hung on expansion anchors. The epoxy bonds along the whole length of the bolt in the drilled hole and does not rely on friction that can relax.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote on the part number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit appears under both 75-209-5876 and 75-209-5876-SS in the source data. Both refer to this epoxy kit with three bolts.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48628828405972,"sku":"SRS-351-4156","price":388.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/752095876-srsmith_epoxykit.jpg?v=1788753446"},{"product_id":"global-pool-products-gpp-db-3j8-3-bolt-jig-for-8-board-base","title":"Global Pool Products 3 Bolt Jig for 8' Board Base","description":"\u003cp\u003eThe Global Pool Products GPP-DB-3J8 is the 3 bolt jig for an 8' diving board base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA diving board base bolts to the deck on a fixed pattern. The jig is the template that puts those anchor points exactly where the base expects them, so the base drops on square and the board sits true. Concrete gives you one attempt at that, which is the whole reason the jig exists.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the jig by itself. Global Pool Products also sells 3 bolt bases for the 8 foot board with the jig supplied alongside, in white, sand and grey, so compare the two before ordering if you still need the base as well.\u003c\/p\u003e","brand":"Global Pool Products","offers":[{"title":"Default Title","offer_id":48629535867092,"sku":"GLO-35-GPP-DB-3J8","price":235.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1de56fd7-db75-4168-ac8d-2cfc28c17d0f.jpg?v=1788766279"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/diving-board-parts-stands.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}