{"title":"Fiberstars","description":"\u003cp\u003eFiberstars pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"wpc-2-replacement-time-clock-for-pool-cleaner-booster","title":"S.R. Smith WPC-2 Replacement Time Clock for Pool Cleaner Booster","description":"\u003cp\u003eThe WPCTC is the replacement time clock for the WPC-2 wireless pool control. It is the clock alone, sold both as a spare for a control whose clock has failed and as an additional clock where another timed circuit is wanted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it runs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe listing points it at a pool cleaner booster pump, the circuit a WPC-2 is most commonly set up to switch. A booster pump only runs on a schedule, so when the clock stops the pressure side cleaner simply never starts, even though the filter pump and the rest of the pad look normal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt carries part number WPCTC and is listed as a direct replacement for part number TC-2, so an older clock comes out and this one goes in without hunting for a cross reference.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48626292654292,"sku":"WPCTC","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ad953922-002e-44c1-bcb3-742a0e461cff.jpg?v=1788707741"},{"product_id":"color-light-stream-12v-with-100-cord-large-laminar","title":"Fiberstars Color Light Stream Large Laminar, 12V with 100 ft Cord","description":"\u003cp\u003eThe Fiberstars CLSLL is the large Color Light Stream laminar, a lighted water feature with a color changing LED built into the unit. Each one comes with a deck box and an LED light driver carrying 100 ft of 12V cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirect drive LED, no fiber\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEarlier lighted laminars ran their color from a fiber optic illuminator sitting somewhere at the equipment pad, with fiber run out to each jet. The Light Stream carries its own LED instead, so features can be installed individually wherever they are wanted. All that is needed is a 12VAC power supply. Losing the fiber also lifts the light output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColors and control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSix colors, white, blue, green, red, amber and purple, plus a color change mode and a disco effect. The units are synchronizable, so a run of laminars along a wall or a bench holds the same color and changes together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWater supply matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA laminar makes its glass smooth arc by passing water through fine internal screens, and those screens are unforgiving about debris. Sand and DE filters shed small particles that will clog them, so the supply to the laminars should be filtered with a cartridge filter. A drain must also be installed. Get those two things right at rough in and the feature stays trouble free.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48626980585684,"sku":"FST-27-4000","price":1060.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6a941215-ef88-4656-9740-0f9eab9fabfb.jpg?v=1788718699"},{"product_id":"lamp-assembly-6000","title":"Fiberstars Lamp Assembly, 6000","description":"\u003cp\u003eFiberstars Y20-6000 is the lamp assembly for the 6000 series fiber optic pool illuminator. It is listed against the 6004, 6008 and 6004-AS illuminators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the system works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA fiber optic pool lighting system has one light source. The illuminator sits at the equipment pad and its lamp feeds every fiber run out to the pool, the spa and the deck. Nothing electrical goes near the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause one lamp lights everything, the whole installation fades together. If the fiber ends have gone dim or the color has lost its depth across the board, the lamp in the illuminator is the place to start.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48627689816276,"sku":"FST-301-3128","price":293.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_30c18844-1013-41c7-a199-a96491fe88c4.jpg?v=1788726643"},{"product_id":"broadcast-lens-only","title":"Fiberstars Broadcast Lens Only","description":"\u003cp\u003eThe Fiberstars B11458 is the broadcast lens, supplied on its own. It measures 2 inches in each direction and is the factory Fiberstars part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLens only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing covers the lens and nothing else. There is no housing, no fitting and no hardware in the box, so it suits a repair where the rest of the assembly is sound and only the lens has clouded, cracked or gone missing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder by number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFiberstars lenses are close enough in appearance that a visual match is not reliable. Check the number recorded on the lens or in the documentation for your fitting and order to B11458 rather than going by the look of the part.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48627846512852,"sku":"FST-30-6712","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f2ee564b-019e-4e1b-9d13-bce6f59bcf9e.jpg?v=1788728203"},{"product_id":"color-wheel-motor-assembly-1504-2004","title":"Fiberstars Color Wheel Motor Assembly 1504 \/ 2004","description":"\u003cp\u003eThe Fiberstars Y10-4005 is the color wheel motor assembly for the 1504 and 2004. It is supplied as a complete assembly and goes in place of the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe color wheel sits in front of the light source, and the motor turns it. That rotation is the whole reason the light changes color. When the motor stops, the wheel parks wherever it happens to be, and the light stays on but locks to a single shade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiagnosing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lamp that lights normally but no longer cycles color points at the wheel drive rather than the light source. If the lamp itself is dim or dark, look elsewhere first. Replacing the assembly restores the color change without touching the rest of the unit.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48628757659860,"sku":"FST-301-3134","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a3e625a5-5482-4617-9459-f9d24cb0f895.jpg?v=1788749799"},{"product_id":"250w-24v-halogen-bulb","title":"Fiberstars 250W 24V Halogen Bulb","description":"\u003cp\u003eThe Fiberstars HI-111 is a 250 watt, 24 volt halogen bulb, manufactured by Ushio. It is the replacement lamp for Fiberstars lighting that uses this bulb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRatings matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis lamp is 250 watts at 24 volts. Both numbers have to match your fixture. A lamp of the right physical shape but the wrong voltage either runs dim and useless or burns out fast, so check the rating on the old bulb or the illuminator before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy output falls off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHalogen lamps dim gradually across their life rather than simply failing, so lighting that has quietly become disappointing is often just a tired bulb rather than a fault in the system. Fitting a fresh one restores the original output.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48628873232596,"sku":"FST-301-3108","price":102.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_44b33978-41bd-4f77-a16d-f90fd2c4eac6.jpg?v=1788756840"},{"product_id":"evenglo-lens-only","title":"Fiberstars EvenGlo Lens Only","description":"\u003cp\u003eThe Fiberstars B9937 is the replacement lens for the EvenGlo, supplied on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLens only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNothing else is included. That suits an installed unit where the rest of the assembly is sound and only the lens has clouded, yellowed or cracked. A lens in that state dims and scatters whatever light reaches it, which reads as a failing light source when the light source is fine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch part number B9937 against the lens you are removing. Ordering by number is the reliable check here, since lenses of similar size are not interchangeable.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48629186003156,"sku":"FST-30-6641","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8473f200-37dd-4ffa-a999-6e89b7868297.jpg?v=1788760080"},{"product_id":"fiber-glo-lens-only","title":"Fiberstars Fiber Glo Lens Only","description":"\u003cp\u003eThe Fiberstars B10724 is the replacement lens for the Fiber Glo pool light, supplied as the lens on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to order one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lens that has clouded, chalked or cracked dims the light long before anything else in the fixture fails. Replacing just the lens is a fraction of the cost of replacing the fixture, so it is the first thing to try when the light looks dull but still works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLens only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNothing else is included. While you have the fixture open, look at the seal. If it has hardened or flattened, order a fresh one at the same time rather than closing the light back up on a tired gasket.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48633447907540,"sku":"FST-30-6644","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7f1ba0ca-5987-4981-ae6a-d8bdbe216e65.jpg?v=1788801867"},{"product_id":"color-wheel-motor-assembly-6008","title":"Fiberstars Color Wheel Motor Assembly 6008","description":"\u003cp\u003eThe Fiberstars Y10-8010 is the color wheel motor assembly for the 6008 fiber optic illuminator. It is the part that drives the color wheel around in front of the lamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the color change happens\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA fiber optic lighting system puts one lamp in a box on the equipment pad and sends the light down fiber to the pool. Color changing is mechanical: a wheel of colored segments rotates slowly through the beam, and whatever segment is in front of the lamp is the color that reaches the water. When the drive stops, the light stays on but the color freezes wherever the wheel stopped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck that the lamp is still lighting and that nothing is physically obstructing the wheel. A jammed wheel and a failed drive look identical from the pool side, and only one of them needs this part.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48633767100628,"sku":"FST-301-3130","price":152.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3746041d-1898-4a22-913e-314fff08df20.png?v=1788814876"},{"product_id":"color-wheel-4-color-fs4-series","title":"Fiberstars Color Wheel 4-Color FS4 Series","description":"\u003cp\u003eThe Fiberstars PT-03D is the four color wheel used in FS4 series fiber optic illuminators. It is the genuine Fiberstars replacement part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA fiber optic lighting system puts one light source in the equipment area and carries the light out to the pool through fiber. The color wheel turns in front of that source, and the colors on the wheel are what the fibers deliver. When the wheel is damaged or no longer turns cleanly, the system still lights but the color sequence stops behaving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your illuminator is an FS4. Fiberstars used different wheels across illuminator generations, and the wheel has to match the housing and drive it sits in.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48633771360468,"sku":"FST-301-3110","price":133.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f13a9a05-f50a-41d4-af7f-4ec8641310b5.jpg?v=1788815048"},{"product_id":"lens-gasket-large","title":"Fiberstars Lens Gasket, Large","description":"\u003cp\u003eThe Fiberstars 22-15006-00 is the large lens gasket, the rubber seal that sits between the lens and the fixture housing and keeps water out of the light.\u003c\/p\u003e\u003cp\u003eLens gaskets are a wear item. Heat and age harden the rubber and set a permanent flat in it, and once that happens the lens no longer clamps down on a live seal. Fitting a new gasket whenever the fixture is opened avoids a second teardown.\u003c\/p\u003e\u003cp\u003eFiberstars lists more than one gasket size, so confirm that the large gasket, part 22-15006-00, is the one called out for your fixture before ordering.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48633933136084,"sku":"FST-30-6643","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9992caba-c207-42de-a386-42d5baafebfc.jpg?v=1788817608"},{"product_id":"replacement-fan","title":"Fiberstars Replacement Fan A7002","description":"\u003cp\u003eThe Fiberstars A7002 is the replacement cooling fan for Fiberstars fiber optic illuminators. It is listed for the FS250 and FS3, and for all 2000 and 6000 series units, including the 6004, 6008 and 6004-AS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the fan matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA fiber optic illuminator concentrates a lot of light and a lot of heat into a small metal box, and the fan is the only thing carrying that heat back out. When it seizes, slows or gets choked with debris, the internal temperature climbs and the unit protects itself by shutting down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiagnosing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe classic pattern is an illuminator that lights normally, runs for a while and then goes dark, coming back only once it has cooled. That reads like a lamp or ballast problem, but a stopped fan produces exactly the same behavior for a fraction of the cost. Check that the fan spins freely and actually runs before ordering the expensive parts.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48634153468116,"sku":"FST-30-6561","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_06d88dac-2c74-429b-8144-f1648980f584.jpg?v=1788825850"},{"product_id":"toggle-switch-3-position","title":"Fiberstars Toggle Switch, 3 Position","description":"\u003cp\u003eThe Fiberstars A11526 is the three position toggle switch used on the Fiberstars fiber optic illuminator, listed against the 6004, 6008 and 6004-AS units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the switch fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA toggle switch is a mechanical part in an electrical circuit. It gets thrown thousands of times, the contacts pit, and eventually it either stops making a connection or only works in one position. From outside the cabinet a dead switch is indistinguishable from a dead lamp or a failed transformer, so it is worth testing early.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirect replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the genuine Fiberstars part and goes back in place of the original.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48634372784340,"sku":"FST-301-0019","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3d49783a-0ddd-4497-9fde-60ff6fca2853.jpg?v=1788828683"},{"product_id":"lens-tightening-tool","title":"Fiberstars Lens Tightening Tool","description":"\u003cp\u003eThe Fiberstars FS-117 is the lens tightening tool for Fiberstars lighting. It exists so that a lens can be seated and brought up without anything sharp or hard touching it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a dedicated tool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLenses are the part of a light fixture least tolerant of improvisation. Pliers, screwdrivers and channel locks all put load into one small spot, and glass and molded plastic answer that with a chip or a crack. A tool made for the lens spreads the effort and lets you tighten evenly, which is what the seal actually needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the truck\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you open lights regularly, this is a tool that pays for itself the first time it saves a lens. Order it by part number FS-117.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48634504216788,"sku":"FST-30-6528","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bd17ae62-79ef-4ff4-baeb-8cc8472143c1.jpg?v=1788833059"},{"product_id":"power-tower-led-retro-with-remote","title":"Fiberstars SR Smith Lighting Power Tower Retro Fiber Optic to LED with Remote | PT-6000","description":"\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003e\u003cstrong\u003eLighting Power Tower Retro Fiber Optic to LED with Remote\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eThe new PT-6000 is powered by 120VAC and converts to 12V through two separate 30 watt transformer’s circuits. Each transformer can control up to four S.R.Smith LED products. Four Treos can be operated on circuit number one and up to four Color Light Streams laminars could be operated on circuit number two. Circuit number one and circuit number two can be synchronized with the push of a button on the remote control unit. You can use an existing S.R.Smith (formerly Fiberstars) fiber optic illuminator base for installation.\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eThe PT-6000 is the ideal solution to upgrade existing fiber optic light systems to LED\u003c\/div\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48647756021972,"sku":"FST-30-6001","price":580.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/52581_0_201622514303.jpg?v=1789035617"},{"product_id":"quartz-halogen-4-position-color-wheel-400-strand-port-capacity","title":"Fiberstars Illuminator System 2000 Color Wheel 4 POS | 2004","description":"\u003cp\u003eFiberstars Illuminator System 2000 Color Wheel 4 POS. OEM part number 2004.\u003c\/p\u003e","brand":"Fiberstars","offers":[{"title":"Default Title","offer_id":48649796747476,"sku":"FST-30-6510","price":536.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/32698_1_2012427133518.jpg?v=1789065020"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/fiberstars.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}