{"title":"Hammerhead","description":"\u003cp\u003eHammerhead pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"remora-pool-vacuum-kit","title":"Hammerhead Remora Complete Portable Vacuum Kit","description":"\u003cp\u003eThe Hammerhead Remora is the battery powered version of the Hammer-Head vacuum that pool technicians have carried for years. Instead of a cord back to an outlet, the head is powered by a wearable, rechargeable lithium battery pack, and the motor assembly and cord are lighter and more compact than the original. The XR1600 is the complete kit: everything needed to vacuum a pool is in the one box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRun time and battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA full charge gives about 50 minutes at full speed or 75 minutes at low speed, with a recharge taking around 6 hours. The battery is rated for roughly 2000 duty cycles, about five years of daily use. Charge it only with the supplied XR1606 charger; that charger is for Remora packs only and should not be used on Hammer-Head Service or Resort units, and a non-approved battery in the power pack voids the warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe XR1601 vacuum head with motor and cord, the XR1602 power pack, the XR1603 lithium battery, the XR1604 motor and cord with plug end, the XR1605 carry handle (which fits all Hammer-Head heads), the XR1606 charger and an HH1508 superfine debris bag. The head weighs 13 lb with its cord, the battery pack 5 lb, and the whole package 18 lb. Minimum operating depth is 12 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eService techs, resorts, condominium and apartment managers, campgrounds and builders: anyone who cleans several pools and wants a fast, thorough vacuum without an extension cord across the deck.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624550641876,"sku":"HPP-20-110","price":1267.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fcdd295c-8606-4aee-a16c-187182be97f4.jpg?v=1788642934"},{"product_id":"hammer-head-service-unit-cart-without-trailer-mount-serv-cart-nm","title":"Hammerhead Complete Cart Assembly, without Mount","description":"\u003cp\u003eThe Hammerhead SERV-CART-NM is the complete cart assembly for Service-21 and Service-30 service units, supplied without the trailer or vehicle mount. It is the cart only: no vacuum head and no mount assembly are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eService crews whose cart has been bent, worn or damaged but whose vacuum head is still good. Rather than rebuilding a frame piece by piece, this replaces the whole cart under the existing head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the NM, no mount, version. If you carry the unit on a trailer or truck mount, the same cart is also available with the mount included. If you only need the bare frame, Hammerhead sells a separate frame kit.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624877273300,"sku":"HPP-20-106","price":1405.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_75b1e1cc-d1ec-473c-9318-407580d9bc3e.png?v=1788648516"},{"product_id":"service-cart-frame-kit","title":"Hammerhead Service Cart Frame Kit","description":"\u003cp\u003eThe Hammerhead HH1070 is the replacement frame kit for the Hammerhead service cart, the cart that carries the vacuum head, battery and cord from pool to pool. It is a genuine Hammerhead part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCarts take a beating on truck beds and pool decks. When the frame is bent or broken but the wheels, mount and hardware are fine, the frame kit rebuilds the cart for less than a complete cart assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the part number against the parts list for your cart. Other cart components, including the complete cart assembly without mount, are available separately.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624881369300,"sku":"HPP-201-1226","price":868.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9a09a42c-ef34-479a-b5e7-fb934c473e63.jpg?v=1788649320"},{"product_id":"hammerhead-service-21-21-vacuum-with-40-foot-cord","title":"Hammerhead Service-21 21\" Vacuum with 40 Foot Cord, Cart and Truck Trailer Mount","description":"\u003cp\u003eThe Hammerhead Service-21 is a self-contained pool vacuum built for pool to pool route work. The motor, propeller and 21 in. head run off a 12 V marine battery carried on the cart, so there is no pump to prime, no valves to set and no hose to connect. You roll it to the deck, put the head in the water and start vacuuming, which is why the Service-21 has become the standard unit on service trucks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to ride on the truck\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt comes with a vehicle mount assembly that fits any 2 in. hitch receiver, so the cart travels on the truck or trailer between stops. Hammerhead rates the time saving at up to 50 percent on a cleaning, which adds up to hours over a route day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHardware that holds up\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe head is injection molded and rolls on non-marking, bearingless cast urethane wheels with a stainless pole swivel mount. The motor is sealed and pressure tested, the propeller is a two blade design and the 40 ft power cord floats. The caddy cart is welded aluminum on 20 in. mag BMX-style wheels with solid non-marking tires and stainless bearings, and every fastener is stainless. An LED battery meter shows the charge state.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box, and what is not\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIncluded: the cart, the 21 in. head, motor, propeller, 40 ft cord, two debris bags and the truck or trailer mount with hardware. Not included: the 12 V deep cycle marine battery, a battery charger and a standard pool pole. With a 27 series battery installed the unit weighs 155 lb; the head and motor alone are 11 lb. If you want a bigger head and a 60 ft cord, look at the Service-30.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624885039316,"sku":"HPP-20-100","price":2426.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b4a930de-73e8-4a41-8929-6bd7075a6210.jpg?v=1788649708"},{"product_id":"21-portable-vacuum-w-60-cord-charger","title":"Hammerhead Resort-21 Portable Vacuum 21 in. with Charger and 60 ft Cord","description":"\u003cp\u003eThe Hammerhead Resort-21 is a cart mounted, battery powered portable pool vacuum built for commercial pools: a 21 in. vacuum head on a 60 ft floating power cord, with the charger and two debris bags included. It ships fully assembled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade to stay put\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Resort series is intended to be left on site. The cart is balanced and easy to maneuver, rolls on non-marking solid airless tires with stainless steel axle hardware, and is compact enough to store in a closet between uses. The frame is lightweight powder coated aluminum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWeatherproof electrics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePower comes from a battery housed in a large marine battery box on the cart, switched through a weatherproof marine switch. The floating 60 ft cord gives the head plenty of reach from the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCart, 21 in. head, 60 ft floating power cord, charger and two debris bags. The battery and the pole are not included. If you need a wider head, the Resort-30 is the same unit with a 30 in. head.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624886087892,"sku":"HPP-20-104","price":2354.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c3b2c874-6de0-4531-a1d2-3a09f7eb0910.png?v=1788649886"},{"product_id":"hammerhead-service-30-30-vacuum-with-60-foot-cord","title":"Hammerhead Service 30\" Vacuum with 60 Foot Cord, Cart and Truck Trailer Mount","description":"\u003cp\u003eThe Hammerhead Service-30 is a self contained pool vacuum built for service route work. It arrives with the cart, the 30 in. head, a 60 ft cord, the motor, the prop, two debris bags and a truck or trailer mount with hardware. The battery, battery charger and pole are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo setup at each stop\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere is nothing to prime and no valve to set. Roll the cart off the truck, drop the head in and start cleaning. Hammerhead puts the time saving at up to 50 percent per pool against conventional vacuuming, which adds up across a day of stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTruck and trailer mounting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe included mount and hardware fix the cart to a truck bed or trailer, so the unit travels secured and comes off ready to work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlan on a battery, charger and pole if you do not already have them. If a 30 in. head is more than your pools need, the Service-21 uses a 21 in. head with a 40 ft cord on the same cart.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624918298836,"sku":"HPP-20-102","price":2767.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_98957e95-ed65-471c-9af1-ab833b5d088d.jpg?v=1788653356"},{"product_id":"motor-w-60-cord-no-propeller","title":"Hammerhead Vacuum Motor with 60' Cord","description":"\u003cp\u003eThe Hammerhead HH1315 is the replacement motor and cord assembly for Hammerhead portable pool vacuums, supplied with a 60 ft cord. When the motor on a Hammerhead stops pulling or the cord is damaged, this assembly restores the vacuum without replacing the head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor with its 60 ft cord attached. The propeller is not included, so transfer the one from your old motor or order a replacement if it is worn. The vacuum head and debris bag are not part of this assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the cord length\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHammerhead builds this motor in 40 ft and 60 ft cord lengths. The 60 ft version here gives the extra reach for larger pools or a power point that sits farther from the water. Confirm the part number on your existing motor reads HH1315 before ordering.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624919970004,"sku":"HPP-201-2025","price":591.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4cc946a7-f26e-427f-be0b-bd3162519595.jpg?v=1788653459"},{"product_id":"hammerhead-hh1305-motor-with-40-foot-cord","title":"Hammerhead Vacuum Motor with 40' Cord","description":"\u003cp\u003eThe Hammerhead HH1305 is the genuine replacement motor for the Hammer-Head Service-21 pool cleaner, supplied with its 40 ft cord as one assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMotor and cord together\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the cord is part of the unit, replacing the motor also replaces the cord that has been dragged across decks and coiled up after every job. You get a fresh run of cable along with fresh suction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is and is not in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor and 40 ft cord. The propeller is not included, so keep yours or add one to the order. If 40 ft is short for the pools you service, the same motor is offered with a 60 ft cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your cleaner is the Service-21. This is the factory part for that model.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624921116884,"sku":"HPP-201-2011","price":546.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_74b47582-71c2-4e97-a94e-88cc2dfd9aa9.jpg?v=1788653534"},{"product_id":"mount-assy-set-w-ss-clamp","title":"Hammerhead Complete Mount Assembly Set with Stainless Steel Clamp","description":"\u003cp\u003eThe Hammerhead HH1306 is the complete mount assembly set for carrying a Hammerhead on a Service cart. The stainless steel mount clamp comes already installed, and the HH1301 hitch adapter and all mounting hardware are in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly fits a standard 2 in. Reese type hitch receiver. It is made for Service carts only; it is not the mount for other Hammerhead cart types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne part number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMount, clamp, adapter and hardware ship together, so there is nothing else to source to put the mount on the cart.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624927310036,"sku":"HPP-201-2068","price":444.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7b41d815-e403-4c88-83c0-1a6e01270054.jpg?v=1788654741"},{"product_id":"hammer-head-service-unit-cart-with-trailer-mount-serv-cart","title":"Hammerhead Service Unit Cart with Vehicle Mount","description":"\u003cp\u003eThe Hammerhead SERV-CART is the complete cart for the Service-21 and Service-30 pool vacuums, supplied with the HH1300 mount assembly so the whole unit rides on a standard 2 in. hitch receiver. It is the way to replace a cart that has been through a few seasons of route work without buying a new vacuum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll of the cart components, the HH1300 mount assembly and the hardware to fit it. The battery, battery charger, pole and vacuum head are not included; you move those over from your existing unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same cart is used for both the Service-21 and the Service-30. It is not for Hammerhead Resort units, which do not use the HH1300 mount and are not compatible with it.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624927965396,"sku":"HPP-20-105","price":1625.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_74652d13-37de-4a7b-8fb7-74461fd4f7ad.png?v=1788654811"},{"product_id":"superfine-debris-bag","title":"Hammerhead Superfine Debris Bag","description":"\u003cp\u003eThe Hammerhead HH1508 is the superfine debris bag for Hammerhead pool vacuums, supplied complete with its cleat. It is the genuine Hammerhead part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for fine debris\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mesh is rated at 80 microns. That is the bag to run when the problem is silt, dust or fine sand on the pool floor, the material that passes straight through a coarser bag and clouds the water again. The red and white color code tells it apart from other Hammerhead bags on the truck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the bag and cleat only. The vac head, vacuum motor and head wheels are separate Hammerhead parts. Confirm the part number HH1508 or UPC 810089640819 against the bag you are replacing.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624937697492,"sku":"HPP-201-2019","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_076ea593-315e-4139-9ff8-f6ffc48e8dd3.png?v=1788655707"},{"product_id":"white-volcano-ultra-fine-bag","title":"Hammerhead White Volcano Ultra Fine Bag","description":"\u003cp\u003eThe Hammerhead HH1510 is the white ultrafine Volcano debris bag for Hammerhead pool vacuum systems. Its 75 micron mesh is made for the fine material a coarse bag lets through: dust, silt and the powder left after plaster work or a windstorm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFine filtration without choking flow\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ultrafine weave holds the small stuff while still letting water move through the bag, so the vacuum keeps its pull through the cleaning cycle. It attaches with a cleat that fastens quickly and stays secure under suction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePick the right bag for the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHammerhead makes bags in several grades. This is the ultrafine option for pools that need extra fine filtration. For leaf loads and heavy debris, the coarse 28 in. bag flows more freely. The bag is durable and reusable: empty it, rinse it and it is ready for the next cleaning.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624938582228,"sku":"HPP-201-2045","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HPP-201-2045.png?v=1788655828"},{"product_id":"hammerhead-hh1061-on-off-hammer-head-mini-switch-for-blue-sea-system","title":"Hammerhead On\/Off Mini Switch for Blue Sea System","description":"\u003cp\u003eThe Hammerhead HH1061 is the on\/off mini switch for the Hammerhead Blue Sea commercial pool cleaning system. It gives the operator direct control over powering the cleaner on and off during a cleaning run.\u003c\/p\u003e\u003cp\u003eIt is a compact switch built to hold up in the pool environment, and it installs as a straightforward replacement for the original. If the switch on your Blue Sea has worn out or stopped responding, this is the part.\u003c\/p\u003e\u003cp\u003eThe battery box with lid for the same system is sold separately and is often replaced at the same time.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48624996221140,"sku":"HPP-201-2050","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6f932476-0919-4bfc-9f5c-727d67a5bed4.jpg?v=1788661566"},{"product_id":"20-wheel-complete","title":"Hammerhead 20\" Wheel Complete","description":"\u003cp\u003eThe Hammerhead HH1050 is the complete 20 inch wheel for the Hammerhead pool vacuum service cart. It comes as a complete wheel, not as a separate rim and tire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA commercial vacuum cart carries real weight, and a wheel that has cracked, gone out of round or seized turns an easy move across the deck into a struggle. Swapping the wheel puts the cart back on its feet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated hardware\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stainless steel wheel bearings, the stainless service cart axle and the axle shaft collar keeper are all separate Hammerhead parts. With the wheel off, look at the bearings and the collar keeper while access is easy.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48625710727380,"sku":"HPP-201-2000","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4caae4c3-d91e-4b18-b2be-69f6161a8313.jpg?v=1788688915"},{"product_id":"21-hammerhead-vac-head-with-40-cord","title":"Hammerhead 21 in. Vac Head with 40 ft. Cord","description":"\u003cp\u003eThe Hammerhead HH1310 is the 21 in. vacuum head with a 40 ft. floating cord. It arrives as the head, motor, propeller and one superfine debris bag, ready to run off a 12 volt battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRather than drawing on the pool filter, the Hammerhead carries its own motor. A pressurized 35 lb thrust motor spins a two blade propeller that pulls water and debris up through an 8 in. throat and into the bag, so leaves and silt never reach the pump basket or the filter. Because the vacuum is self contained, it can be walked around a pool that is too dirty to put through the filtration system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for repeated use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe head is injection molded and rides 1 in. above the pool floor on non marking, bearing free cast urethane wheels. The pole mount is a stainless swivel and the hardware is stainless throughout. The head and motor together weigh 11 lb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you still need\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing does not include the 12 volt deep cycle marine battery, the charger, the battery case, the connectors, the caddy cart or the on\/off switch. Those are separate items, so plan the power side of the setup before the first use. A 60 ft. cord version of the same head is available if the 40 ft. cord is short for your pool.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48625717739732,"sku":"HPP-201-2016","price":1149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dd657bdc-4d24-4ed8-a94c-a86d8a9b5dfb.jpg?v=1788689270"},{"product_id":"hammer-head-xr1604-remora-motor-with-cord-and-plug-end","title":"Hammerhead Remora Motor with Cord and Plug End","description":"\u003cp\u003eThe Hammerhead XR1604 is the replacement motor for the Remora portable pool vacuum. It comes with the cord and plug end already fitted, so the swap does not involve cutting or splicing wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace the motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Remora that will not run is usually a power problem before it is a motor problem, so start with the battery pack and its connections. If the pack is charged and healthy and the head is still dead, or the motor runs weakly and noisily, the motor itself is the part to change.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the Hammerhead factory motor, part XR1604, matched to the Remora and its power pack.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48625724424404,"sku":"HPP-201-2071","price":310.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d880223c-f301-48f7-83d5-483a77ed9f8a.jpg?v=1788690134"},{"product_id":"hammerhead-hh1230-complete-pole-yoke-mount-swivel-assembly","title":"Hammerhead Complete Pole Yoke Mount Swivel Assembly","description":"\u003cp\u003eThe Hammerhead HH1230 is the complete pole yoke mount swivel assembly for Hammerhead pool vacuums. It is supplied as one assembly, ready to fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe yoke mount is the joint between the pole and the vacuum head. The swivel in it is what lets the head stay down on the floor while the operator changes the angle of the pole, so it carries the load on every pass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cracked yoke, a broken mount or a swivel that has gone stiff or loose all show up the same way: the head stops following the floor and starts to lift or wander. Replacing the assembly puts the connection back to standard.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48625747067092,"sku":"HPP-201-2009","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d9c1e49b-cc38-4fd0-b8ce-4a071012b168.jpg?v=1788691328"},{"product_id":"hitch-adapter-with-u-bolt","title":"Hammerhead Hitch Adapter with U-Bolt for Mount Assembly, 2 Inch","description":"\u003cp\u003eThe Hammerhead HH1301 is the hitch adapter for the Hammerhead mount assembly, in the 2 inch size, and it comes with its U-bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the piece between the mount assembly and a 2 inch hitch. With it fitted, the vacuum rides on the hitch rather than sliding around loose in the bed of a truck between accounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe adapter and U-bolt only. The mount assembly itself, the stainless mount clamp and the separate U-bolt mounting set are all ordered on their own.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48625853006036,"sku":"HPP-201-2034","price":98.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/hammer-head-hh1301-hitch-adapter-with-u-bolt.jpg?v=1788701703"},{"product_id":"reliant-in-line-salt-system-25-000-gallons-solaxx","title":"Solaxx Reliant In-Line Salt System, 25,000 Gallon Pools","description":"\u003cp\u003eThe Solaxx CLG225A is the Saltron Reliant in-line salt system rated for pools up to 25,000 gallons. It sits in the circulation plumbing and makes sanitizer from dissolved salt on a continuous basis, so the pool is sanitized by the equipment rather than by a bucket and a scoop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe design idea\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSolaxx summarizes Reliant in one word: simplicity. The unit uses the smallest number of switching parts they could design around, and pairs that with uncompromising electrical protections. Outdoor equipment lives with power surges, heat and weather, and the parts that fail first are usually the ones that were not needed in the first place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRunning it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA digital display carries the settings and lets you monitor and adjust output as the season changes. Automatic shut-off protection is built in. There is nothing to learn beyond reading the display and keeping the salt level where it belongs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get from it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA steadier chlorine level than hand dosing produces, softer feeling water, and fewer trips to buy and store chemicals. Sized correctly to the pool, a salt system is the least demanding way to keep water sanitized through a season.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48626302582996,"sku":"SOX-45-1009","price":1076.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8ea04e89-1c92-4c45-aa2a-afc048b885c4.jpg?v=1788707915"},{"product_id":"smart-switch","title":"Hammerhead Smart Switch","description":"\u003cp\u003eThe Hammerhead HH1062 is the smart switch kit for Service and Resort type cleaning units. One kit covers both, so you do not have to work out which switch your machine left the factory with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the switch adds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo speed settings put the operator in control of how hard the vacuum motor works, which matters on light debris where full speed is more than the job needs. Automatic shutoff means the unit is not left running when nobody is watching it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtection built in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDirect wire short circuit detection monitors the supply and opens the circuit when it sees a fault, and motor overload protection steps in before the vacuum motor pulls more current than it should. Between them they take the two most common ways a portable vacuum motor gets destroyed off the table.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48626357240020,"sku":"HPP-201-2061","price":254.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HH1062_1.jpg?v=1788709192"},{"product_id":"hammerhead-resort-30-portable-vacuum-30-head-with-60-cord-and-charger","title":"Hammerhead Resort-30 Portable Vacuum, 30\" Head with 60 ft Cord and Charger","description":"\u003cp\u003eThe Hammerhead Resort-30 is a self contained portable pool vacuum built around a 30 inch head, a 60 ft power cord and a charger, all mounted on a wheeled cart. It arrives fully assembled and is ready to run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for a single large pool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eResort units are the configuration meant to be left on site rather than loaded into a truck each morning. The two standard builds are the Resort-21 with a 21 inch head and this Resort-30 with a 30 inch head, both on a 60 ft cord. The wider head is the reason to choose this one: on a large commercial or resort pool it covers the floor in noticeably fewer passes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cart\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe frame is powder coated aluminum, so the whole unit stays light enough to move by hand. It is balanced for maneuvering around a crowded deck and narrow enough to store in a closet. Solid airless tires ride on stainless steel axle hardware, which means no flats and no black marks left behind on the deck surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutdoor duty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePower comes from a large marine battery box, and the unit is switched with a weatherproof marine switch. Both are chosen for equipment that sits out in sun, rain and splash rather than in a garage.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48626382504148,"sku":"HPP-20-103","price":2513.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4b7bc2a5-0c98-4dc8-bd71-6f6c2979cf10.jpg?v=1788709539"},{"product_id":"hammerhead-hh1502xl-coarse-extra-large-bag-with-cleat","title":"Hammerhead Coarse Extra Large Bag with Cleat","description":"\u003cp\u003eThe HH1502XL is the extra large coarse debris bag for Hammerhead vacuum heads, supplied with its cleat. It is the bag to reach for when the pool is full of leaves rather than dust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoarse versus superfine\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA coarse bag has an open weave. That is deliberate: water passes through freely so the head keeps its suction while the bag fills with leaves, acorns and twigs. Fine silt goes straight through it, which is why Hammerhead also offers a superfine bag for the last pass once the bulk debris is gone. Most owners keep both and switch depending on the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the extra large size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCapacity is what saves time on a big cleanup. The extra large bag holds more before it has to come off and be emptied, which matters when you are opening a pool in spring or working through a fall leaf drop.\u003c\/p\u003e\u003cp\u003eThe cleat is included, so the bag arrives ready to mount rather than needing hardware pulled off the old one.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48626484150484,"sku":"HPP-201-2038","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2c334c09-87ff-4992-a13c-3fe11c8843a1.jpg?v=1788710822"},{"product_id":"hh1900-smart-charger","title":"Hammerhead G10 Smart Charger","description":"\u003cp\u003eThe Hammerhead HH1900 is the smart charger for Hammerhead battery powered pool vacuums. It is the NOCO G10, and it is what Hammerhead now supplies in place of the older G7200.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a smart charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA smart charger reads the battery and adjusts what it delivers, tapering off as the pack fills instead of pushing a fixed current until somebody unplugs it. On a vacuum that lives on a truck and gets plugged in overnight, that is the difference between a battery that lasts seasons and one that does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing a G7200\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf your Hammerhead came with a G7200, the G10 is the current equivalent. Order it by the Hammerhead part number HH1900 and you get the right unit. The battery pack is not part of this listing.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48626567413972,"sku":"HPP-201-2053","price":177.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b392483b-ec60-4d6e-9454-f10ec94a757c.png?v=1788712528"},{"product_id":"stainless-steel-mount-clamp-with-j-pin-cable","title":"Hammerhead Stainless Steel Mount Clamp with J-Pin and Cable","description":"\u003cp\u003eThe Hammerhead HH1167 is the stainless steel mount clamp for Hammerhead pool vacuum cleaners, supplied with its J-pin and cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSold as one part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clamp, the J-pin and the retaining cable come together. That saves chasing three small numbers to put one mounting point back together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHardware on a pool vacuum spends its working life submerged. Stainless steel holds up where plated steel pits and seizes, which is why the clamp and pin are made from it.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48626718408916,"sku":"HPP-201-1167","price":161.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_08b87ed3-130f-4441-8bed-3f2e17fd41f8.jpg?v=1788714016"},{"product_id":"hammerhead-hh1304-mount-upright-bar","title":"Hammerhead HH1304 Mount Upright Bar","description":"\u003cp\u003eThe Hammerhead HH1304 is the vertical mount brace beam for Service carts. It is the upright on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is and is not in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYou get the upright bar. The mount clamp and the hitch adapter are separate Hammerhead items, so check what else is damaged before ordering. If more than the bar has failed, Hammerhead also sells a mount assembly with a stainless steel clamp and a complete mount assembly set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCart compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis upright fits Service carts. It does not fit the Resort cart, so confirm which cart you have before ordering.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48626835620052,"sku":"HPP-201-2024","price":215.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_84ff5cb5-1f41-41ca-857f-9fe45693c0a4.jpg?v=1788715696"},{"product_id":"pole-yoke-mount-swivel-handle","title":"Hammerhead Pole Yoke Mount Swivel Handle","description":"\u003cp\u003eThe Hammerhead HH1225 is the stainless steel swivel handle that mounts to the pole yoke on a Hammerhead pool vacuum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle is where the operator meets the machine. It swivels at the yoke so the pole can be worked at any angle while the vacuum head stays flat on the floor, which is what lets one person cover a large commercial pool without lifting the head off the surface every few strokes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part spends its whole life wet and under load. Stainless steel handles both, which is why the factory specifies it here rather than a plated or painted part that would rust from the first scratch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA handle that has gone loose, seized in its swivel or cracked at the mount is worth changing straight away. Everything the operator does passes through this one connection, and a failure here puts the whole vacuum out of service.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48627219431636,"sku":"HPP-201-1225","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/hammer-head-hh1225-pole-yoke-mount-swivel-handle.jpg?v=1788720163"},{"product_id":"hammerhead-hh1506-standard-bag-complete-with-cleat","title":"Hammerhead Standard Bag Complete with Cleat, 100 Microns","description":"\u003cp\u003eThe Hammerhead HH1506 is the standard complete debris bag with cleat for Hammerhead pool vacuums, built around a 100 micron mesh.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat 100 microns catches\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne hundred microns is the working grade for general pool debris. It holds sand and fine dirt while leaving enough open area for water to pass, which is the balance that keeps suction up over a full clean rather than choking off after the first few minutes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleat fastening\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bag mounts with the cleat system, so it comes off for emptying and goes back on without tools. That matters on a commercial route where the bag might be emptied several times in a day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuperfine and ultra fine bags exist as separate part numbers and catch smaller particles, but they also load up faster. The standard bag is the one most pools run day to day, with a finer bag kept for the jobs that need it.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48627225723092,"sku":"HPP-201-2012","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HPP-201-2036-_1a.png?v=1788720172"},{"product_id":"hammerhead-hh1030-21-service-head-halves-back","title":"Hammerhead 21\" Service Head Halves, Back","description":"\u003cp\u003eThe Hammerhead HH1030BK is the back side half for the 21 inch Hammerhead service vacuum head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe head on a Hammerhead service vacuum is built from two halves. This part is the back one. It is sold on its own so that a cracked, gouged or worn out half can be replaced without buying the complete head and the motor with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTurn the head over and work out which half is actually damaged before ordering. Hammerhead lists the head as HH1030 and adds the BK suffix for the back half, so HH1030BK is what you want if the rear is the problem. This listing is for the 21 inch head.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48627616874708,"sku":"HPP-201-2005","price":161.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_caa01599-acbd-480e-9326-36e532172ca2.png?v=1788725395"},{"product_id":"hammerhead-hh1151-set-of-6-head-wheel","title":"Hammerhead Set of 6 Head Wheels HH1151","description":"\u003cp\u003eThe Hammerhead HH1151 is the head wheel kit for the Hammerhead vacuum heads. It is a set of six blue wheels, four small and two large, and it covers both the 21 inch and the 30 inch head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with the wheels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe four small wheels arrive with their hardware and bushings. The two large wheels come with bushings. That means the bearing surfaces get replaced along with the wheels, which is the part most people forget when they buy wheels on their own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy wheels matter on a vac head\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe head only cleans well when it rolls evenly. Wheels flatten, bushings wear oval, and the head starts to drag, skip or wander off its line, which leaves streaks behind on the floor. A full set of six puts the whole head back on its wheels at once instead of chasing one worn spot at a time.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48627656065236,"sku":"HPP-201-2067","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_db963d43-d2ca-471b-bbde-a43d9e7cae4d.png?v=1788725855"},{"product_id":"hammerhead-hh5055b-plastic-accessory-box","title":"Hammerhead HH5055B Plastic Accessory Box","description":"\u003cp\u003eThe Hammerhead HH5055B is the heavy duty white plastic accessory box for the HammerHead vac system. Hammerhead also lists the same part as a chemical tray, so both names point to this item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt gives the vac system somewhere to carry the bottles, accessories and odds and ends that otherwise end up loose on the deck or in the back of the truck. The plastic is the heavy duty grade, which is what keeps it serviceable through repeated handling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the genuine Hammerhead part, HH5055B. Order by that number to be sure of the correct box.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48627748438228,"sku":"HPP-201-2039","price":103.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e8aec36e-5709-4e48-9fc0-f3f7da07957d.png?v=1788727706"},{"product_id":"hub-cap-for-cart-wheel","title":"Hammerhead Hub Cap for Cart Wheel","description":"\u003cp\u003eThe Hammerhead HH1252 is the hub cap for the cart wheel, the small cap that finishes off the hub on a Hammerhead cart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it goes missing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese carts get pushed across decks, lifted onto trucks and dropped off tailgates all day. Hub caps take knocks and pop off, and they are rarely found again. The wheel keeps turning without one, but the hub is then open to sand and grit, which is exactly what wears a bearing surface out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is not\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is cart hardware. The vacuum heads, service heads and the head wheels are separate Hammerhead parts, so check which wheel you are working on before ordering.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48628756840660,"sku":"HPP-201-2064","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c119fd6c-1177-436f-a0dd-52379d0926f4.jpg?v=1788749786"},{"product_id":"hammerhead-hh1125-long-bungee-cord-24-inch","title":"Hammerhead HH1125 24 inch Long Bungee Cord","description":"\u003cp\u003eThe Hammerhead HH1125 is the 24 inch long bungee cord used on Hammerhead pool vacuums. It is the factory replacement for a strap that has stretched out or broken.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it wears out\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA bungee cord is elastic wrapped in fabric, and it spends its life in chlorinated water and direct sun. Both attack it. The cord goes slack first, then the fabric frays where the hooks sit, and at that point it is no longer holding anything under tension even though it still looks intact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the long cord at 24 inches. Hammerhead builds the strap to a length, so measure or check the part number on the one you are taking off before ordering. Fitting takes no tools.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48628877131988,"sku":"HPP-201-2031","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fd57e4a2-f190-4eb0-9eb8-ff218b061ad3.jpg?v=1788756895"},{"product_id":"hammerhead-hh5056-battery-box-with-lid","title":"Hammerhead HH5056 Battery Box with Lid","description":"\u003cp\u003eThe Hammerhead HH5056 is the battery box for Hammerhead pool vacuums, supplied with its lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe box houses the battery that runs the vacuum and the lid closes over it. Between them they keep water, grit and deck debris away from the terminals, which is the whole reason the enclosure exists.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese boxes live a rough life. They are carried, dragged and loaded in and out of trucks, and eventually the shell cracks or the lid stops latching properly. At that point the battery is no longer protected, so a new box is the cheap repair that prevents an expensive one.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48628893253844,"sku":"HPP-201-2049","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HPP-201-2049.png?v=1788757042"},{"product_id":"606-608-paver-jig-w-10-ss-bolts","title":"S.R. Smith Salt Pool Jump System Concrete Base 12\" x 12\" Jig with 10\" Bolts","description":"\u003cp\u003eThis is the S.R. Smith 69-209-011-SS concrete base jig for the Salt Pool Jump System, a 12 by 12 inch jig supplied with 10 inch stainless steel bolts. It is used when setting the base for the 606 and 608 stands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA jump stand bolts down to studs cast into the deck. Those studs have to sit at the exact spacing and height the stand expects, and once the concrete has gone off there is no adjusting them. The jig clamps the bolts in the right pattern through the pour so the stand drops onto them cleanly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe jig is part of the concrete work, not the stand assembly, so it belongs on the job list before the pour rather than on the day the board goes on. Follow the base drawing supplied with your jump system for depth and reinforcement.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48628939817172,"sku":"SRS-351-4126","price":309.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_67bc1e45-db84-4355-8e71-10fc042945fb.jpg?v=1788758233"},{"product_id":"hammerhead-hh1501-cleat-bag-clips-4-pak","title":"Hammerhead HH1501 Shark Cleat without String, 4-Pak","description":"\u003cp\u003eHammerhead HH1501 is sold as a four pack of cleats for use with the Hammerhead Service 21 cleaner. It is the version supplied without the string.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat our source calls it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part appears under two descriptions. The listing title gives it as a Shark cleat without string, and the product name gives it as cleat bag clips. Both refer to the same Hammerhead part number, HH1501, and we have carried both rather than pick one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy keep spares\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCleats and bag clips are the smallest parts on a commercial vacuum and the ones most often lost on the deck or left at the last pool. When one goes missing the debris bag works loose partway through a pass, which means redoing the job. A four pack costs very little against the time that wastes, which is why service techs carry them by the set rather than one at a time.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48629121155284,"sku":"HPP-HH1501","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_17bc699c-9f1d-46fd-bef7-e5bc689454be.jpg?v=1788759880"},{"product_id":"hammer-head-three-blade-propeller-kit","title":"Hammerhead HH1003G Three Blade Propeller Kit, Includes Propeller, Prop Pins and Prop Nut","description":"\u003cp\u003eThe Hammerhead HH1003G is the three blade propeller kit for the Hammerhead pool vacuum. It includes the propeller itself, two prop pins and one prop nut, and it fits both the HH1305 and HH1315 motor and cord assemblies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the prop is a wear part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe propeller is what pulls water and debris through the vacuum, and it takes the abuse: gravel, acorns and pebbles chip blades, and a hard strike shears the prop pins that drive it. A prop with a damaged blade turns without moving much water, so suction falls off long before the machine sounds wrong.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything needed to fit it. The pins that usually fail come with the kit, along with the nut that holds the prop on the shaft. Hammerhead also lists a two blade propeller kit as a separate part, so confirm which prop your vacuum is running before you order.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48629136261332,"sku":"HPP-201-2044","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9ec3aa51-e9c7-406d-a588-174bec9c3d99.jpg?v=1788759941"},{"product_id":"xl-superfine-debris-bag","title":"Hammerhead XL Superfine Debris Bag, 80 Microns","description":"\u003cp\u003eThe Hammerhead HH1508XL is the extra large superfine debris bag, an 80 micron mesh supplied with its cleat. It is the fine end of the bag range, meant for the material a standard bag will not hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen the fine bag matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCoarse bags catch leaves and grit and let dust straight through, which is why a pool can look worse after vacuuming. Plaster dust, fine silt and sanding residue all need a finer mesh. At 80 microns this bag traps that material instead of dispersing it back across the floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing and wear\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe XL size buys longer runs before you stop to empty it, which is the difference on a pool under heavy leaf or dust load. Bags are a wearing part, and a torn or clogged bag costs suction, so replacing one that has done its work restores the vacuum to how it performed when new.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48629264711892,"sku":"HPP-201-2037","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d2fec300-2488-44ce-8ea5-b5d3b5acb4c5.jpg?v=1788761760"},{"product_id":"ss-axle-shaft-collar-keeper","title":"Hammerhead Stainless Steel Axle Shaft Collar Keeper","description":"\u003cp\u003eThe Hammerhead HH1251 is the stainless steel axle shaft collar keeper for the service cart. It is the collar that holds the HH1050 cart wheel to the cart frame, and it is often called a wheel keeper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeepers get lost during a wheel or bearing change, and a stripped fitting is just as bad as a missing one. Either way the wheel is free to work its way off the axle, so the cart is out of service until the keeper is back on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe keeper takes either a 5\/32 allen wrench or a #25 star wrench, so check which fitting yours uses before you start. Stainless steel is the right material here, since the part lives in wet, chlorinated conditions that would rust a plain steel collar.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48629308129492,"sku":"HPP-201-2002","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HPP-201-2002.png?v=1788762175"},{"product_id":"short-standard-debris-bag","title":"Hammerhead Short Standard Debris Bag","description":"\u003cp\u003eThe Hammerhead HH1506F is the short standard debris bag for Hammerhead vacuum pool cleaners. It is the bag that catches everything the head lifts off the floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLength and mesh\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHammerhead offers its bags in more than one length and more than one weave. This is the short length in the standard mesh, which is the general purpose choice for everyday leaves, sand and floor debris. If your pool drops fine silt, the superfine bag holds more of it; if it drops heavy leaf loads, the coarse bag clogs less quickly. Check which length is on your machine now, because the wrong one will not mount correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBags are a wear part. Seams open, the fabric thins where it drags, and fine dirt starts passing straight through the weave. A bag in that condition slows the vacuum and quietly returns debris to the pool, so replacing it restores both the suction and the catch.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48634020430036,"sku":"HPP-201-2052","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9aab2b08-4735-4942-a7a1-24ccd7444391.jpg?v=1788824801"},{"product_id":"xl-standard-debris-bag","title":"Hammerhead Standard Extra Large Bag with Cleat","description":"\u003cp\u003eThis is the Hammerhead extra large standard debris bag with cleat, the replacement collection bag for Hammerhead vacuum pool cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStandard versus coarse\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHammerhead offers the extra large bag in two weaves. This is the standard bag. The coarse extra large bag with cleat is a separate part, so pick the one that matches the debris you are picking up and the bag you are replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy bags get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA debris bag is a wear item. It abrades against the pool floor, catches on edges and slowly loads with fine silt that no rinse will clear. Once it has a hole or will no longer pass water freely, it stops collecting and starts putting debris back where it came from.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe listing shows HH1506XL and the manufacturer description shows HH1506XLCOMP. Both point at the same extra large standard bag supplied with its cleat.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48634287063252,"sku":"HPP-201-2036","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HPP-201-2036-_1a_9c2be0b7-92ed-48c7-bb8d-19bd6a188bdd.png?v=1788828227"},{"product_id":"hammer-head-two-blade-propeller-kit","title":"HammerHead Two Blade Propeller Kit","description":"\u003cp\u003eThe HammerHead HH1004G is the two blade propeller kit for HammerHead pool vacuum units. It is the genuine HammerHead part, supplied as a kit with the propeller, the prop nut and the prop pins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAn improved propeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHammerHead lists this two blade propeller as an improved design that raises performance on all of its units. The propeller is what moves water and debris through the machine, so its condition sets how well the vacuum picks up. Blades that are chipped, cracked or rounded off from years of contact with the pool floor move less water, and the unit feels weak long before anything else fails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo blade or three blade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHammerHead offers both a two blade and a three blade propeller kit. Look at the propeller currently on your machine and order to match. If your nut and pins are still sound you can buy the bare two blade propeller on its own instead of this kit.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48634420658388,"sku":"HPP-201-1084","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HH1004G.jpg?v=1788830215"},{"product_id":"hammer-head-two-blade-propeller","title":"Hammerhead HH1004 Two Blade Propeller","description":"\u003cp\u003eThe Hammerhead HH1004 is the two blade propeller for HammerHead pool vacuum units. It is the propeller by itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo blade or three\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHammerhead lists both a two blade and a three blade propeller. This is the two blade version, so match it to what came off the machine rather than assuming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePropeller only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hardware is not included. Hammerhead offers a separate two blade propeller kit that comes with the prop pins and nut, which is the better choice if the old propeller failed hard enough to damage them. If the pins and nut are sound, this listing is the part you need.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48634471645396,"sku":"HPP-201-1083","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HH1004.jpg?v=1788831711"},{"product_id":"l-pin-w-cable","title":"Hammerhead L-Pin with Cable","description":"\u003cp\u003eThe Hammerhead HH1175G is the L-pin with cable used on the mount assembly of Hammerhead vacuum heads. It is supplied as the pin and its retaining cable together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eL-pin or J-pin\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHammerhead uses two pin shapes and they are not interchangeable. This is the L-pin. The J-pin is supplied with the stainless steel mount clamp assembly, so look at the pin that came out before you order the one going in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the cable matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cable tethers the pin to the head. It is the only reason a pin pulled at the side of a pool ends up back in your hand instead of on the bottom. When the cable frays through, the pin is on borrowed time.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48634599964884,"sku":"HPP-201-2026","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/hammer-head-hh1175g-l-pin-w-cable.jpg?v=1788835289"},{"product_id":"hammerhead-service-21-cleaner-21-wide-cleaner-with-60-cord-service-21-60","title":"Hammer-Head Service-21 Pool Cleaner, 21 Inch, 60 Foot Cord","description":"\u003cp\u003eThe Hammer-Head Service-21 is a portable pool vacuum built for service work: a 21 inch cleaning head, a 60 foot floating power cord and a welded aluminum caddy cart to move it from pool to pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for the route\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe vacuum runs off a 12 volt deep cycle marine battery, so nothing has to be plugged in at the pool and there is no hose to prime or connect to the skimmer. The motor is sealed and pressure tested and turns a two blade propeller, and an LED voltage meter tells you what is left in the battery before you start a job you cannot finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe cart matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA service vacuum spends most of its life being moved. This one comes on a welded aluminum caddy with 20 inch mag BMX style wheels, non-marking solid tires so it does not mark a deck, and stainless wheel bearings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you still need\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe battery, the battery charger and a standard pool pole are not part of the package. If this is your first Hammer-Head, order those alongside it.\u003c\/p\u003e","brand":"Hammerhead","offers":[{"title":"Default Title","offer_id":48645961318612,"sku":"HPP-20-101","price":2111.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/46545_0_202512995011.jpg?v=1788975164"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/hammerhead.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}