{"title":"Jacuzzi Bros.","description":"\u003cp\u003eJacuzzi Bros. pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"dvk-7-multiport-backwash-valve-bolt-on","title":"Jacuzzi DVK-7 Multiport Backwash Valve (Bolt On)","description":"\u003cp\u003eThis is the Jacuzzi DVK-7 multiport backwash valve, part number 39262803R, in the bolt on style. It is the seven position dial valve used on Jacuzzi sand filters, and it is listed under the Carvin name as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a seven position valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe dial valve is what makes a sand filter useful. Turning the handle sends water through the sand to filter it, backwards through the sand to clean it, out to waste, or straight back to the pool. Seven positions cover normal running, backwashing, rinsing, waste, recirculation, closed and winter storage without any replumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace the whole valve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eValves usually fail in one of two ways: the plastic body cracks, or the internal seat wears until water bypasses between positions and the pool never quite clears. A cover kit covers some of that, but a cracked body or a worn seat is a valve replacement. This one bolts on, so confirm your filter uses the bolt on pattern rather than a threaded connection before ordering.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48625785897172,"sku":"JAC-06-3071","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f03a2fbc-3f42-4b63-a43f-1f92f11c16a0.jpg?v=1788692448"},{"product_id":"sight-glass-deflector","title":"Jacuzzi Sight Glass Deflector","description":"\u003cp\u003eThe Jacuzzi 13038203R is the sight glass deflector for the DVK series dial valves. It is the genuine Jacuzzi part, listed for the DVK-6 six way valve and the DVK-7 and DVK-7C seven way valves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sight glass on a dial valve is how you tell when a backwash has run long enough. The deflector sits in the flow path at the glass so the water you are watching is representative of what is leaving the filter. Without it, the glass can look clear while the filter is still purging, or stay cloudy after the job is done.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the deflector on its own. If the glass itself is cracked or fogged, that is a separate Jacuzzi part number, and it is common to replace both at the same time while the valve is open.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48626981372116,"sku":"JAC-051-8789","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_814b2b65-5bc3-482b-99b3-46a0d24f54ac.jpg?v=1788718718"},{"product_id":"tank-o-ring-2","title":"Jacuzzi Tank O-Ring for Tri-Clops Filters","description":"\u003cp\u003eThe Jacuzzi 47056999R is the 20 inch tank o-ring for Tri-Clops cartridge filters. It is the seal between the tank halves, the one the band clamp compresses when the filter is closed up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTank o-rings are the most common reason a cartridge filter weeps at the seam. The rubber takes a set in its groove, and once the tank has been opened it often will not seat the same way again. Anyone opening a Tri-Clops to change cartridges is better off putting a new o-ring in while the tank is apart than chasing a drip afterwards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSeat the o-ring fully in its groove before bringing the halves together, and use a pool rated silicone lubricant. Petroleum based grease will break the rubber down. Jacuzzi lists this part for the Tri-Clops range, with the parts diagram covering the TC-300, TC-450 and TC-600 and the part also carried against the TC-330, TC-440 and TC-550.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48627845955796,"sku":"JAC-051-8888","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ffec061c-2487-416b-b2a3-3110e111cbcd.jpg?v=1788728199"},{"product_id":"air-bleeder-valve-w-o-ring","title":"Jacuzzi Air Bleeder Valve with O-Ring","description":"\u003cp\u003eJacuzzi part 39254701R is the air bleeder valve for these filters, supplied with its o-ring. The body is plastic, matching the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery pressure filter traps air. The bleeder valve on top of the tank is how you get it out: open it on startup and hold it open until water rather than air comes through. Air left in a filter cushions the tank, throws off the pressure gauge reading, and makes the filter work badly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is sold with the o-ring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a bleeder weeps or will not seal, the o-ring is usually the culprit rather than the valve body. Both come together here, so the repair is complete in one part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed as a part for the Jacuzzi Earthworks original style DE filters in the EW75, EW100, EW125 and EW150 sizes, and for the Jandy SF-S side mount sand filters. Compare the valve on your filter to the photograph before ordering.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48627856507092,"sku":"JAC-051-8815","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ba8b4b8f-c15b-40f3-9612-99f3efec8385.png?v=1788728444"},{"product_id":"air-bleed-assembly-1-4-pvc","title":"Jacuzzi Air Bleed Assembly, 1\/4\" PVC","description":"\u003cp\u003eThis is the genuine Jacuzzi 1\/4 inch PVC air bleed assembly for Jacuzzi Earthworks DE filters and Jacuzzi Tri-Clops cartridge filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir collects at the top of a filter tank every time the system is opened or the water level drops. The air bleed gives that air somewhere to go. Bleed it off and the tank fills completely, the full grid or cartridge area goes back to work and the pressure gauge reports real filter condition rather than a trapped pocket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir bleeds are small, they live at the highest point on the tank and they take the worst of the sun. Once the stem seizes, the seat will not close or the assembly weeps whenever the pump runs, replacing the whole assembly is faster and more reliable than trying to reseal the old one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOn the part numbers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis item carries two numbers in the supplier data, 4669-08 and 42-2972-00-K. Match either against your filter documentation.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48627861160148,"sku":"JAC-051-8859","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6ff2793e-2a5d-4632-b979-c1c97192ef90.jpg?v=1788728539"},{"product_id":"grid-8-1-2-x-18-4-required","title":"Jacuzzi DE Filter Grid 8-1\/2\" x 18\" (4 Required)","description":"\u003cp\u003eThis is the Jacuzzi 42212316R DE filter grid, 8-1\/2 in by 18 in. Four of them are required in the grid set, alongside the narrower grids that make up the rest of the assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe grid is used in the Jacuzzi Avalanche DE filters AV-40, AV-60, AV-80 and AV-100, the Landslide LS40, LS55 and LS70, and the original style Earthworks EW75, EW100, EW125 and EW150.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace a grid\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDE grids fail at the fabric. A tear, a split seam or a face that will no longer clean up all have the same result: DE powder passes through instead of being held, and it returns to the pool through the returns. Since grids age together, it is worth inspecting the whole set while the tank is open.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48627875217620,"sku":"JAC-051-8822","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_00004328-39f6-46d8-bebb-84316032f554.jpg?v=1788729488"},{"product_id":"drain-cap-w-gasket","title":"Jacuzzi Drain Cap with Gasket","description":"\u003cp\u003eThe Jacuzzi 4626-16 is a drain cap supplied with its gasket, a new original equipment part. The same cap is also listed by Jacuzzi under part number 85826300R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed for the Jacuzzi Laser bolt-on top mount sand filters in models 160L, 190L, 225L and 250L, and for the CFR 50, 75, 100 and 150 cartridge filters. The drain cap sits at the bottom of the tank and is opened every time the filter is drained down for service or for winter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is sold with the gasket\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRepeated opening and closing is hard on the sealing face. A cap that weeps once the filter is back under pressure is usually failing at the gasket rather than at the threads, so replacing the two together is the fix that lasts. Brand records for this part also appear as Jacuzzi Bros, the older company name.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48627921354964,"sku":"JAC-101-6207","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7d885d2f-a190-4424-b6f7-966f9475d7c7.jpg?v=1788729831"},{"product_id":"filter-tank-o-ring","title":"Jacuzzi OEM Filter Tank O-Ring for Sherlock Filter","description":"\u003cp\u003eJacuzzi 47038047R is the OEM tank o-ring for Sherlock filters. It seals the joint between the two halves of the filter tank, which is the one place on a filter that has to hold pressure every minute the pump runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring measures 11-3\/4\" across the outside, 11-3\/8\" across the inside, and 3\/16\" thick, in rubber. Those three numbers matter more than they look: an o-ring a fraction too thin will not fill the groove under clamp load, and one a fraction too large rolls out of the groove as the tank closes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater weeping from the tank seam is the classic symptom. Rubber that has gone hard, taken a flat set in the groove, or picked up a nick from a screwdriver will not seal again however tight the clamp is drawn, and overtightening to chase the leak only damages the clamp. Fit a fresh ring instead, and make a habit of replacing it whenever the tank is opened for a filter service.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48627954450644,"sku":"JAC-051-6420","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d2c21bc8-e80a-4bc8-a77f-899bbd3e7793.png?v=1788730903"},{"product_id":"grid-8-1-2-x-12-4-required","title":"Jacuzzi DE Filter Grid 8-1\/2\" x 12\" (4 Required)","description":"\u003cp\u003eJacuzzi 42356907R is the 8-1\/2\" by 12\" DE filter grid used in the Landslide LS40 and Avalanche AV40 filters. Four of this size are required, out of the 6 grids the filter holds in total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the grid does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA DE filter does not filter through the grid itself. The grid is a frame with a fabric skin, and the diatomaceous earth you add coats that fabric. The coating is the filter medium. The grid just has to hold it evenly and stay intact under flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA tear or a seam split lets DE pass straight through, which comes back as powder in the pool and a return that never quite clears after a recharge. Check each grid against the light with the manifold out. Because grids age together, a set that is starting to fail in one place is usually not far off failing elsewhere, and replacing a single grid alongside five worn ones often means opening the filter again before long.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48627955138772,"sku":"JAC-051-2684","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_61ec1709-4416-4387-84eb-5a5e8b9b801e.jpg?v=1788730929"},{"product_id":"dirt-catcher-cfr-100","title":"Jacuzzi Dirt Catcher, CFR 100","description":"\u003cp\u003eThis is the genuine Jacuzzi dirt catcher for the CFR 100 cartridge filter. It carries two part numbers in the record we work from: 4666-15B and 42-2943-06-R. Either number on the part you are replacing points here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside a cartridge filter, the dirt catcher holds back the heavier material that drops out of the water so it does not land straight on the pleats. The cartridge is designed to catch fine particles, and it does that job for longer when grit is not packing the bottom of the element.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a direct replacement for the original piece, sized for the CFR 100. Check the model badge on your filter before ordering, because the CFR range shares a family look across several tank sizes.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48628781646036,"sku":"JAC-051-8847","price":133.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e66ea955-bacc-4f19-b24f-4a3dafc19ef2.jpg?v=1788750541"},{"product_id":"cover-kit-dvk-7-dvk-7c","title":"Jacuzzi Cover Kit for DVK-7 and DVK-7C Backwash Valves","description":"\u003cp\u003eThe Jacuzzi 39-2626-05RKIT is the replacement key cover assembly for the DVK-7 and DVK-7C backwash dial valves. It is supplied complete as a kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover sits on top of the dial valve and carries the handle. Every backwash cycle puts load through it, and it is one of the parts that wears or cracks first on a valve that is otherwise still serviceable. Fitting the kit is a far smaller job than replacing the whole valve and repiping the connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe catalog writes this part three ways: 39-2626-05RKIT, 39262605RKIT and 39262605R. They are the same kit, listed with and without the hyphens and the KIT suffix. The brand is recorded in places as Jacuzzi Bros, which is the same manufacturer.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48628786495700,"sku":"27-105-1554","price":130.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7f6f4b09-d220-49f1-bed0-fa1c1b6d3b3b.jpg?v=1788750686"},{"product_id":"grid-7-x-18-2-required","title":"Jacuzzi DE Filter Grid 7\" x 18\" (2 Required)","description":"\u003cp\u003eJacuzzi 4638-03B is a 7 inch by 18 inch DE filter grid. Two are required, and it is listed for the Jacuzzi Earthworks original style filters, models EW75, EW100, EW125 and EW150.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a grid does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA DE filter does not filter with the grid itself. The grid is a fabric covered frame, and the diatomaceous earth you add through the skimmer coats that fabric. The coat is the filter. The grid just holds it in the right shape and lets clean water pass through to the manifold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGrid fabric wears at the seams and tears where debris has been trapped against it. Once a grid is open, DE goes straight through it and back to the pool, which is why fine white powder on the floor after a recharge points at the grid stack. Pull the stack, rinse it and look for damage before you replace anything.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the narrower of the two sizes in the stack, and the wider grids are a separate part. Count and measure what you are removing.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48628806549716,"sku":"JAC-051-8823","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bc3dbb31-36c5-4458-94ab-aad642b37b89.jpg?v=1788751907"},{"product_id":"sight-glass","title":"Jacuzzi Sight Glass for DVK-6 and DVK-7 Dial Valves","description":"\u003cp\u003eThe Jacuzzi 4628-17 is the plastic sight glass for the DVK-6 dial valve and the DVK-7 and DVK-7C seven way dial valves. It is the small clear window in the waste line that lets you see the water leaving the filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it earns its place\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBackwashing without a sight glass is guesswork. You either stop too early and leave the filter dirty, or run far longer than needed and dump clean, chemically balanced water down the waste line. Watching the flow clear through the glass tells you exactly when to switch the valve back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck whether the deflector inside the sight glass housing is also broken. That is a separate Jacuzzi part, and it is worth replacing both at once rather than opening the valve twice.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48628834566356,"sku":"JAC-051-8801","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_27077469-bdf7-4202-9a49-73e140b92858.jpg?v=1788753798"},{"product_id":"tank-lid","title":"Jacuzzi Tank Lid for CFR 50, 75, 100 and 150 Cartridge Filters","description":"\u003cp\u003eThis is the replacement tank lid for the Jacuzzi CFR cartridge filters, covering the CFR 50, 75, 100 and 150. It is a new OEM part from Jacuzzi.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart numbers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid is listed under two numbers, 4666-13A and 42-2998-00-R. Both refer to this part. If the number on your old lid has weathered off, go by the filter model instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat usually goes wrong\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA tank lid fails in one of two ways. It cracks, typically as a hairline running from the rim after years of sun and clamping pressure, or it stops sealing. A crack means a new lid. A seal that weeps usually means the tank o-ring underneath is flat, and that is a separate and much cheaper part. Look at the old lid in good light before deciding which one you actually need.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48628879589588,"sku":"JAC-051-8865","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ed59eaa7-503d-42f8-b729-4fc1c508e3a5.jpg?v=1788756903"},{"product_id":"lock-ring-1","title":"Jacuzzi Lock Ring","description":"\u003cp\u003eThis is the genuine Jacuzzi Bros lock ring, a new OEM part that serves across three different Jacuzzi filter families.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring is listed for the CFR 50, CFR 75, CFR 100 and CFR 150 cartridge filters, the Landslide LS40, LS55 and LS70 DE filters, and the Sand Trap ST27 and ST33 sand filters. One part covering cartridge, DE and sand filters is unusual, and it is worth noting if you service a mix of older Jacuzzi equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo part numbers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur records carry this part as 42285007 and also as 42-2850-07-R. Both point at the same ring, so do not be put off if the number in your parts manual is written the other way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lock ring holds the filter closed against system pressure. A ring that is cracked, distorted or no longer pulls the halves together evenly is not a cosmetic problem. Replace it rather than tightening around it, and inspect the sealing surfaces and the O-ring while the filter is open.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48629299511508,"sku":"JAC-051-8829","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_adce6237-f743-428c-b76d-aab223049512.png?v=1788762096"},{"product_id":"w-series-skimmer-face-flange","title":"Jacuzzi W Series Skimmer Face Flange","description":"\u003cp\u003eThe Jacuzzi 43114404R is the skimmer face flange for the W Series, listed for the WB skimmer. It measures 16.5 inches by 8 inches by 0.5 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the flange does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe face flange is the plate on the front of the skimmer. On a vinyl liner pool it is the clamping surface: the liner and gasket are pulled between the flange and the skimmer throat, and the screws through it make the seal. If it cracks, warps or loses a screw boss, the clamp is uneven and water begins working its way behind the liner at the skimmer, which is one of the most common leak points on a liner pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJacuzzi built the W Series in several variants, and the WL, WC and WB share a parts group. The source names the WB skimmer for this flange. If your skimmer is a different W Series variant, measure the flange you are removing against 16.5 by 8 by 0.5 inches before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile it is off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe faceplate gasket is a separate part. Since the flange has to come off to change either one, replace the gasket at the same time rather than reusing a compressed one.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48633703104724,"sku":"JAC-251-1351","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_124fd6ed-aa59-4616-8f6f-d37710dd85ae.jpg?v=1788812018"},{"product_id":"eye-seal-ring-1-2hp-3hp","title":"Jacuzzi Eye Seal Ring 1\/2HP-3HP","description":"\u003cp\u003eThe Jacuzzi 10-1462-07 is the eye seal ring used across a wide span of Jacuzzi pool pumps, from the Cygnet and J series through the Magnum family and the Ring-Lok models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe eye seal ring is the fixed wear surface that the eye of the impeller spins inside. That clearance is the seal between the pressure side of the impeller and the suction side. As the ring wears and the gap opens, some of the water the impeller has already moved slips straight back around instead of leaving through the discharge, and the pump quietly loses flow while sounding perfectly normal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRead the fitment carefully\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCoverage is not the same across every family. Cygnet, J, JCM, K, KM and the L models are listed at all horsepowers. Magnum, Magnum Plus and Magnum Force are covered from 0.5 to 3.0 HP. The Ring-Lok models and the RC are only covered from 0.5 to 1.0 HP. Find your model and its horsepower on the list before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReaching this ring means the pump is apart. Look at the impeller, the shaft seal and the housing gasket at the same time. Those are the parts that fail on the same clock, and a second teardown a month later is time nobody wants to spend twice.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48633763725524,"sku":"JAC-101-6431","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d56b7a0c-24e9-4432-95fc-74321418e156.jpg?v=1788814667"},{"product_id":"dirt-catcher-cfr-75","title":"Jacuzzi Dirt Catcher, CFR 75","description":"\u003cp\u003eThis is the Jacuzzi dirt catcher, part number 42-2995-03-R, a new OEM component designed to fit the Jacuzzi CFR 75 cartridge filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside a cartridge filter tank, not everything the water carries ends up on the pleats. Heavier material drops out and collects, and the dirt catcher is the internal that holds it so it can be cleaned out rather than churned back into the flow every time the pump starts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CFR filters share a family and a look, but not every internal carries across the sizes. This one is listed for the CFR 75. Match the part number stamped on the piece you are replacing, or check it against the parts breakdown for your exact filter, rather than going by appearance alone.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48633784271060,"sku":"JAC-051-8864","price":108.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_787461ea-4ac5-4b80-9ba2-4fac9136e4b7.jpg?v=1788816331"},{"product_id":"drain-plug-1-4-with-o-ring-set-of-2","title":"Jacuzzi Drain Plug 1\/4\" with O-Ring (Set of 2)","description":"\u003cp\u003eThese are Jacuzzi 1\/4 inch drain plugs with o-rings, sold as a set of two. Our source carries two part numbers for the item, 30060906R2 and 31160906R2, so quote both when you match it against your equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmall part, seasonal job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDrain plugs come out at every close and go back in every spring. They get dropped, cross threaded, over tightened and left in a bucket in the garage, and the o-ring flattens with age. A plug that will not seal weeps all season and can lose the pump prime, which is a lot of nuisance from a part this size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is listed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plugs are black plastic, 1\/4 inch, and each comes with its o-ring. The source lists them for CRF25\/CFT25 and under the Splash-Pak UD-S pump models. Check the plug thread and size on your own unit first, since Jacuzzi used more than one drain plug across its pumps and filters. Replace both plugs together, because the second o-ring is the same age as the one that failed.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48633786302676,"sku":"JAC-051-6409","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bdce89d3-12a7-418f-b182-bcde72689530.jpg?v=1788816481"},{"product_id":"grid-7-x-12-2-required","title":"Jacuzzi DE Filter Grid 7\" x 12\" (2 Required)","description":"\u003cp\u003eThis is the Jacuzzi replacement DE filter grid, part number 42357004R, measuring 12 in long by 7 in wide. Two of this size are used in the filter, within a complete set of six grids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich filters it is listed for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe part is specified for the Jacuzzi Landslide LS40 and the Jacuzzi Avalanche AV40. It is also cataloged under the broader Jacuzzi Avalanche AV-40 through AV-100 and Landslide LS40 through LS70 parts groups, so check your exact filter model and grid count against it before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the grid does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA DE filter works by holding a coat of diatomaceous earth on the fabric of its grids. That coat is the actual filter medium, and the grid is what carries it. When the fabric tears or thins, DE passes straight through to the pool and the filter stops holding pressure the way it should.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing them\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGrids in one tank are the same age and have done the same work, so a single torn grid rarely means the rest are healthy. With the tank open it costs nothing to look over every grid, and doing the set at once saves a second teardown a season later.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634007290068,"sku":"JAC-051-2685","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2a9625fe-e7d0-415b-8995-e2802b1c2bdf.jpg?v=1788823668"},{"product_id":"dirt-catcher-cfr-50","title":"Jacuzzi Dirt Catcher, CFR 50","description":"\u003cp\u003eThis is the dirt catcher for the Jacuzzi CFR 50 cartridge filter, supplied as a new OEM Jacuzzi part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe dirt catcher is an internal component of the CFR 50 tank, so replacing it means shutting the system down, relieving pressure and opening the filter. Once the tank is open the old part comes out and this one goes in its place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the model\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Jacuzzi CFR line runs 50, 75, 100 and 150, and internal parts are not interchangeable across the sizes. This one is listed for the CFR 50. It is carried under two references, 4666-15 and the Jacuzzi number 42-2942-07-R.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634023313620,"sku":"JAC-051-8846","price":93.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0d2b4751-7fde-4008-b882-ecc04f391ab2.jpg?v=1788824877"},{"product_id":"w-series-faceplate-gasket","title":"Jacuzzi W Series Faceplate Gasket","description":"\u003cp\u003eThis is the Jacuzzi 13123005R2 faceplate gasket for W series skimmers. It is the flat seal that goes between the skimmer faceplate and the pool wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe faceplate clamps the liner or wall surface against the skimmer throat, and the gasket is what makes that joint watertight. When it goes hard, shrinks or tears, water starts finding its way behind the faceplate instead of running cleanly into the skimmer, and the joint can weep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny time the faceplate is off. Gaskets age from sun, chemicals and repeated compression, and a used one rarely re-seals as well the second time. Replacing it while the screws are already out saves doing the job twice.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634161004756,"sku":"JAC-251-1108","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_75990a76-027b-4853-9964-b206623dbfe0.jpg?v=1788825998"},{"product_id":"filter-lock-ring","title":"Jacuzzi Filter Lock Ring","description":"\u003cp\u003eThis is the Jacuzzi filter lock ring, part number 42367102R, also written 42-3671-02-R. It is a new OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring is used on Jacuzzi SherLok cartridge filters in models SHER80, SHER120, SHER160 and SHER200, and on Jacuzzi Avalanche DE filters in models AV40, AV60, AV80 and AV100. It may suit other Jacuzzi filter models, so compare it against the ring you are taking off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lock ring is what clamps the filter lid onto the body, and it is holding back the full working pressure of the system. Rings crack from age, from being overtightened, and from being knocked during cartridge changes. If yours is split, distorted or will no longer draw the halves together evenly, replace it before the filter goes back under pressure. Replacing the tank o-ring at the same time saves a second teardown.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634166870228,"sku":"JAC-051-7102","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_262f3643-9dc1-4dee-be9f-25ac217db6c8.jpg?v=1788826089"},{"product_id":"seal-housing-1-5-3hp-fr-5hp-ur","title":"Jacuzzi Seal Housing for Magnum Plus and Magnum Force Pumps, 1.5-3 HP FR and 5 HP UR","description":"\u003cp\u003eThis is the Jacuzzi 5064-18D seal housing for Magnum Plus and Magnum Force pumps in the 1.5 to 3 HP FR and 5 HP UR sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal housing is the plate between the motor and the wet end. It carries the stationary half of the shaft seal, positions the impeller, and bolts up to the motor face. A cracked housing, a corroded seal seat or a distorted mounting face all show up the same way: a pump that weeps from behind the impeller no matter how many new seals go into it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaking sure it is the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSeveral Jacuzzi housings look alike, so measure before ordering. The maximum outside diameter at the motor side is 7-5\/16 inch and the depth front to back is 2-1\/4 inch. At the front, the outside diameter is 6-9\/16 inch, with nine small holes around the outside and three more on the face. Around the front where the impeller sits there is a raised section about 1\/4 inch tall, extending out to the outside screw holes, with a 1\/4 by 5\/16 inch notch on its outer edge. The inside diameter of that raised section measures 5-1\/4 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you have it apart\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA seal housing rarely fails on its own. If you are replacing one, fit a new shaft seal at the same time and inspect the impeller and the o-rings, since the pump is already open and the labor is the expensive part of the job.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634271498452,"sku":"JAC-101-9498","price":91.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b49bade8-ce52-43a3-9702-b3bd0a384488.jpg?v=1788827991"},{"product_id":"dvk-6-cover","title":"Jacuzzi DVK-6 Cover","description":"\u003cp\u003eThis is the Jacuzzi 4628-05 cover for the DVK-6 six way dial valve. It is the piece shown as the cover in the DVK-6 valve parts breakdown, supplied on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a cover fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover is a sealing surface, not just a lid. Every time the handle moves the valve through its positions, the internal seals ride against it. Years of chlorine, heat and grit leave the face scored, and a cover that has been over tightened or frozen can crack or warp. Once that happens the valve either weeps at the body or lets water slip between ports, which shows up as a filter that will not backwash properly or a return that keeps flowing while the valve is set to waste.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover alone. Gaskets, o-rings and the handle repair kit are separate parts, so it is worth checking the condition of the sealing parts while the valve is open and replacing anything that looks flattened or hard.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634402701524,"sku":"JAC-051-8812","price":56.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_557544a6-a036-4ecf-b2ab-0eb9ce87b67e.jpg?v=1788829154"},{"product_id":"motor-housing-bracket","title":"Jacuzzi Motor Housing Bracket","description":"\u003cp\u003eThe Jacuzzi 02136802R is the motor housing bracket used on the Magnum, Magnum Plus and Magnum Force pumps. It is also listed under the Splash Pak UD-S pump models. This is the genuine Jacuzzi part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bracket ties the motor to the pump housing and carries the clamping load that keeps the two halves together. It is a quiet part in normal service, which is why it tends to be overlooked until the motor starts to move against the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it wears out\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEquipment pads are damp places and pool chemistry is unforgiving. Brackets corrode from the outside in, thin at the stress points and eventually crack. If the old one comes off in poor condition, look at the mounting nut and ratchet at the same time. Those are separate Jacuzzi parts and there is little point putting new hardware onto a bracket that is already gone, or the reverse.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634443563220,"sku":"JAC-101-9495","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dbe50a7d-7f2c-4e52-9644-0ccaedd8d4be.jpg?v=1788830520"},{"product_id":"snap-fit-stand-pipe-190l-laterals-not-included","title":"Jacuzzi Snap-Fit Stand Pipe, 190L (Laterals not Included)","description":"\u003cp\u003eThe Jacuzzi 42376004R is the snap-fit stand pipe manifold assembly for the Laser L190 sand filter with the bolt-on valve. Laterals are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand pipe runs down the center of the tank to the manifold sitting in the sand bed. Water is pushed down through the media, passes through the laterals, and returns up the stand pipe to the valve. That column is the only route filtered water has out of the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSand appearing in the pool is the classic symptom. A crack anywhere in the stand pipe, the manifold or one of the laterals lets media bypass the screens and travel straight out to the returns. Since the manifold sits at the bottom of the tank, reaching it means emptying the sand out, which is the natural moment to put in fresh media and check every lateral rather than replacing one piece at a time.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634472267988,"sku":"JAC-051-2427","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9d7c0e59-8996-474a-b02d-564d199e427e.jpg?v=1788831785"},{"product_id":"1hp-impeller-3-3-4-diameter","title":"Jacuzzi 1HP Impeller (3-3\/4\" Diameter)","description":"\u003cp\u003eThis is the 1 horsepower impeller for Jacuzzi J Series spa pumps, supplied as a new OEM part. It measures 3-3\/4 in. across the outside diameter and may also fit other Jacuzzi model pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMeasure before you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers look alike and the wrong one either will not seat or will not move water. The dimensions are all listed here for that reason: 3-3\/4 in. outside diameter, 15\/32 in. thickness at the outside edge and 9\/32 in. on the inside face, 3-1\/4 in. from the end of the shaft to the front of the intake, an inlet of 2-1\/16 in. outside and 1-13\/16 in. inside, and a shaft cover 1-1\/2 in. long by 5\/8 in. across. Compare those against the impeller in your hand rather than going by pump model alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a worn impeller looks like\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe vanes wear thin, the eye of the impeller opens up, and small debris chips the edges. Flow drops off while the motor still runs at full speed and sounds normal, which is what separates a worn impeller from a clogged one. The shaft cover threads onto the motor shaft, so the impeller comes off with the motor, and the shaft seal should be replaced at the same time.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634491699412,"sku":"JAC-101-9510","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_43f3bfef-7f33-4dec-ab48-89b4d601191d.jpg?v=1788832642"},{"product_id":"av-40-ls-40-lift-strap-set-of-2","title":"Jacuzzi AV-40\/LS-40 Lift Strap (Set of 2)","description":"\u003cp\u003eThis is the pair of lift straps for the Jacuzzi Avalanche AV-40 and Landslide LS-40 DE filters, supplied as a new OEM Jacuzzi Bros part. Two straps come in the set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat they are for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe grid assembly inside a DE filter is heavy once it is loaded with diatomaceous earth and water, and it sits down in the tank with nothing convenient to grab. The lift straps are the handles: you pull on them to raise the whole pack straight up and out for cleaning. Without them you are wrestling the manifold or the grids themselves, which is how grids get cracked.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace them\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStraps stretch, fray and tear at the loop after enough seasons of wet DE, chlorine and sun. The failure usually shows up mid clean, with the grid pack half out of the tank. If one strap has gone, the other is the same age, which is why they are sold as a pair. Check that your filter is the AV-40 or LS-40 size, since the larger Avalanche and Landslide models use different straps.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634491732180,"sku":"JAC-051-2693","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_70ea2212-04ee-4ccb-9aee-dd12374f1ecd.jpg?v=1788832648"},{"product_id":"manifold-retainer-knob-with-washer","title":"Jacuzzi Manifold Retainer Knob with Washer","description":"\u003cp\u003eThis is the Jacuzzi manifold retainer knob supplied with its washer, the fastener that holds the manifold down over the cartridge stack in a Tri-Clops filter. It is catalogued as 42365304R and also appears as 4669-06.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside a Tri-Clops the manifold caps the cartridges and directs flow through them. The retainer knob is what keeps that manifold seated. When the knob cracks or its threads strip, the manifold can lift under pressure and water finds a path around the elements instead of through them. The pool goes cloudy while the pressure gauge stays low, which sends a lot of owners hunting for the wrong problem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlastic knobs age in sunlight and chlorine, so a knob that has gone chalky, will not tighten, or shows a hairline split should be replaced. The washer goes with it in this listing, which matters because a hardened washer will not seal even behind a fresh knob. It is an easy part to swap while the filter is already apart for a cartridge clean.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634525122772,"sku":"JAC-101-8820","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_50a774af-8873-4972-b90f-949aa7d6fbc3.jpg?v=1788833828"},{"product_id":"basket-assembly-magnum-magnum-plus","title":"Jacuzzi Basket Assembly for Magnum and Magnum Plus Pumps","description":"\u003cp\u003eThis is the Jacuzzi strainer basket assembly, part 16109704R, carrying the OEM number 16-1097-04 with 9978 molded into the basket. It is supplied complete with its flapper for the Magnum family of pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the basket does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything the skimmer misses arrives at the pump. The strainer basket is the last catch point before the impeller, and it holds leaves, twigs, acorns and grit that would otherwise pack the impeller vanes or lodge in the plumbing downstream. A basket that has split or lost a section is not doing that job, even though the pump still runs and the lid still seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirming the fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source material lists this basket for the Magnum, Magnum Plus, Magnum Force and Magnum Force 3, and separately describes it as the basket used in manufacturing prior to 2003. Both readings are worth checking against your own pump, so measure the old basket: 5-13\/16 inches across the top outside, 5-1\/8 inches across the top inside, 5 inches across the bottom outside, and 8-3\/4 inches tall.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634544619732,"sku":"JAC-101-9545","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5444c1ff-e922-4955-9cb9-1f35a2e645c1.jpg?v=1788834112"},{"product_id":"strainer-basket-8","title":"Jacuzzi Strainer Basket for Cygnet, LR, SLR, Dominator, CLR and SharkJet Pumps","description":"\u003cp\u003eThe Jacuzzi 16105215 is the strainer basket used in the Cygnet, LR, SLR, Dominator, CLR and SharkJet pumps. It stands 8 inches tall, measures 5 inches across the top and has a 2 inch middle opening. Some listings carry the same part with an R suffix, as 16105215R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right basket\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBaskets across these pump families look very similar in a photograph and are not interchangeable. The three measurements are the reliable check: height, top diameter and the middle opening. Take them off the basket you are replacing before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is worth replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe strainer basket is the last thing between the skimmer and the impeller. Age, sun and chemicals make the plastic brittle, and the crack usually starts at the rim or the base where the load is. A basket in that state still looks like it is working while it feeds grit into the wet end.\u003c\/p\u003e\u003cp\u003eOur records also list this basket against Carvin and Jacuzzi LH, LTH, LR, PH and UPH pumps. If your pump is on that list rather than the first one, confirm the measurements before ordering.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48634696630484,"sku":"JAC-101-9542","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_00bfa31d-bac9-478e-992e-d134aa036e46.jpg?v=1788836408"},{"product_id":"mounting-nut-ratchet","title":"Jacuzzi Mounting Nut Ratchet","description":"\u003cp\u003eThis is the Jacuzzi 5064-22 mounting nut ratchet, listed in the parts for the Jacuzzi Magnum, Magnum Plus and Magnum Force pumps.\u003c\/p\u003e\u003cp\u003eThe ratchet is the element that works with the mounting nut to hold the joint tight. When it wears, the nut can back off in service and the assembly it secures gradually works loose, which shows up as movement or a rattle rather than as an outright failure.\u003c\/p\u003e\u003cp\u003eIt is supplied on its own. The mounting nut is a separate Jacuzzi part, so before you order, look at the nut where the ratchet engages. If that face is worn too, replacing only one half of the pair usually means doing the job again a season later.\u003c\/p\u003e","brand":"Jacuzzi Bros.","offers":[{"title":"Default Title","offer_id":48635037221076,"sku":"JAC-101-9561","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_97af12e3-03e4-464d-a576-101a7860c60e.jpg?v=1788840198"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/jacuzzi-bros.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}