{"title":"Jandy Stealth, PlusHP \u0026 FloPro Pump Parts","description":"\u003cp\u003eReplacement parts for Jandy Stealth, PlusHP \u0026amp; FloPro Pump, genuine OEM and compatible aftermarket.\u003c\/p\u003e","products":[{"product_id":"lid-lock-ring-assembly-w-seal-phpf-phpm","title":"Jandy Lid \u0026 Lock-Ring Assembly with Seal, PHPF\/PHPM","description":"\u003cp\u003eThe Jandy R0448800 is the genuine replacement lid and lock ring assembly for Plus HP PHPF and PHPM pumps. It comes as a kit of three parts: the clear trap lid, the black lock ring assembly and the lid o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed for the Plus HP PHPF and PHPM, and the same assembly is used on the MaxHP MHPM and WaterFeature WFTR series. The lid is 7-13\/16 in. across, clear plastic, with a four tab twist lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOld part numbers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit replaces A0578200 and A0578100. If you look at your existing clear lid you will find A0578100 stamped into it. That lid is not sold on its own, only as part of this kit.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624831496404,"sku":"TLD-101-2012","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f6c7ccb9-6d01-4c75-8a20-c1b77e616413.jpg?v=1788643124"},{"product_id":"pump-body-shpf-shpm","title":"Jandy Pump Body for Stealth SHPF\/SHPM Pumps","description":"\u003cp\u003eThe Jandy R0445601 is the genuine pump body for the Stealth SHPF and SHPM pumps, and it is shared by the WaterFall SWF series and the ePump JEP variable speed pump. It is a unibody housing, meaning the strainer trap and the volute are one molded piece, so a crack in either means replacing this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnections\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth suction and discharge are male buttress thread, the same as the original, so the existing Jandy unions thread straight back on without cutting pipe. The trap takes the standard four tab twist lock lid with an 8-13\/16 in. outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is not in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe drain plugs are not included; they are Jandy part R0446000. The lid and locking ring, strainer basket, seal plate and motor all transfer from your existing pump. Plan on new o-rings while everything is apart.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624873636052,"sku":"TLD-101-2008","price":393.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_71d40024-1614-4819-ba38-436a839f5889.jpg?v=1788647955"},{"product_id":"pump-housing-body","title":"Jandy Pump Housing Body for FHPM FloPro \u0026 VS FloPro","description":"\u003cp\u003eThe Jandy R0479800 is the genuine replacement pump housing body for the FloPro FHPM series and the VS FloPro. It is the wet end shell that holds the strainer basket and carries the suction and discharge connections, and it is the part to order when a housing has frozen, cracked or started leaking at the seams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the single speed FHPM models from 0.75 through 2.5 HP and the variable speed VS FloPro. Your existing motor and internal parts transfer over.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the housing only. The pump basket, lid with lock ring, lid o-ring, diffuser and the 2 in. tailpiece o-rings and union nuts are separate parts. If any of them are worn, this is a convenient time to replace them.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624879468756,"sku":"TLD-101-2045","price":256.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7f5ebc54-7cf5-4744-b736-e9b54e257563.jpg?v=1788648722"},{"product_id":"lid-locking-ring-assembly-w-o-ring","title":"Jandy Lid \u0026 Locking Ring Assembly with O-Ring","description":"\u003cp\u003eThe Jandy R0445800 is the complete lid and locking ring assembly, with o-ring, for the Jandy Stealth SHPF and SHPM pumps and the ePump JEP variable speed pumps. The lid is stamped A0577900; R0445800 is the number you order it under.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA clear plastic trap lid 10-1\/16 in. across, the 4 tab twist lock ring that holds it down and a fresh lid o-ring. Buying the three together means a cracked lid, a stripped ring or a flattened o-ring are all dealt with in one swap, and the clear lid lets you check the basket and water level without opening the pot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the pump is a Stealth SHPF or SHPM or an ePump JEP, and if you can, check that the old lid is stamped A0577900.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624885334228,"sku":"TLD-101-2031","price":120.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_04b93a9b-2765-459f-82d3-1880dc2a48f1.png?v=1788649767"},{"product_id":"backplate-kit-fhp","title":"Jandy FHP Flo Pro Backplate Kit","description":"\u003cp\u003eThe Jandy R0479500 is the genuine backplate kit for the FloPro line of pumps. It fits the FHPM series from 0.75 through 2.5 HP, the FHPF series and the VS FloPro, and it comes with the three parts the job needs: the backplate, the o-ring that seals it to the housing, and a new shaft seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe backplate is the seal plate that sits between the motor and the wet end. When it cracks or warps, water leaks out behind the impeller and air gets drawn in, which shows up as a drip under the motor or bubbles in the basket that no suction side fix will cure. The shaft seal lives in the same plate and is the pump's main wear item, so Jandy packs a fresh one with the plate rather than have you reuse a seal that has already run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate mounts in place of the original with the pump apart at the housing clamp. It covers the whole FHPM horsepower range and the VS FloPro, so one part number serves most FloPro installations.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624886382804,"sku":"TLD-101-2042","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bfca08a6-56aa-4fb0-a4d7-554979a4af3b.jpg?v=1788649941"},{"product_id":"2-x-2-1-2-pump-union-assembly","title":"Jandy 2\" x 2-1\/2\" Pump Union Assembly (Set of 2)","description":"\u003cp\u003eThe Jandy R0449000 is a set of two 2 in. by 2-1\/2 in. pump unions. Each union is the full three piece assembly: a tail piece, its o-ring and the coupling nut, so the pair covers both the suction and discharge sides of a pump. It is the genuine Zodiac Jandy part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same union is used across three Jandy pump lines, the PlusHP in both PHPF and PHPM versions, the MaxHP MHPM and the WaterFeature WFTR. It is also the union on the Legacy LRZE and LRZM gas heaters from 2009 onward, so one part number covers the pump and the heater on many Jandy pads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnions are what let you pull a pump or heater without cutting pipe. A cracked coupling nut, a warped tail piece or a flattened o-ring turns into a drip at the equipment, and a new union set is the clean fix. Replacing both sides at once keeps the two connections at the same age.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624922362068,"sku":"TLD-101-2028","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d4db5336-f0a0-411f-846d-daf7ddbfeb77.png?v=1788653624"},{"product_id":"5hp-3hp-diffuser-w-o-ring-and-hardware","title":"Jandy 0.5 HP to 3 HP Diffuser with O-Ring and Hardware","description":"\u003cp\u003eThe Jandy R0445400 is the genuine diffuser for Jandy's 0.5 through 3 HP pumps, supplied as a kit with the o-rings and hardware needed to fit it. One part number covers the Stealth SHPF and SHPM, PlusHP PHPF and PHPM, MaxHP MHPM, WaterFeature WFTR and the ePump JEP variable speed pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne diffuser, two screws, two washers and two o-rings. That is everything the diffuser needs to go back onto the pump with fresh seals, so there is no second order for the small parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser sits over the impeller and shapes the flow into the volute. A cracked or worn diffuser costs the pump flow and can make it noisy or slow to prime. If the pump is already open for an impeller or shaft seal, it is the right time to fit a new diffuser as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the pump is one of the listed Jandy families and rated between 0.5 and 3 HP. The horsepower range is broad on this part, so the family match is what matters.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624928653524,"sku":"TLD-101-2006","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8fb341b2-a62b-442f-8111-655a86a7d202.jpg?v=1788654897"},{"product_id":"lid-with-lock-ring","title":"Jandy Lid with Lock Ring","description":"\u003cp\u003eThe Jandy R0480000 is the strainer lid and locking ring for the FloPro family of pumps. It is the clear plastic lid you look through to check the basket, together with the four tab ring that clamps it to the pump body and the lid o-ring that seals it. All three come in the kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the FloPro FHPM and FHPF pumps from 0.75 through 2.5 HP and the VS FloPro. The lid measures 6-7\/8 in. across. If your pump is one of these models and the old lid matches that size, this is the part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLids fail two ways: the plastic clouds and cracks with sun and age, or the lock ring tabs wear until the lid will not clamp tight. Either one lets air into the strainer, and a pump that draws air loses prime and runs hot. A worn o-ring shows the same symptom and is worth trying first if the lid itself looks sound; the R0480200 ring is included here and also available separately.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624929767636,"sku":"TLD-101-2041","price":72.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8ed40895-e6fb-4df6-9c9d-47688cdd4bce.png?v=1788654962"},{"product_id":"mechanical-seal-5-8-id","title":"Jandy Mechanical Seal, 5\/8\" ID","description":"\u003cp\u003eThe Jandy R0479400 is the Pro Series mechanical shaft seal, a carbon and ceramic pair with a 5\/8 in. inside diameter on the ceramic. It is the genuine Jandy part for Stealth SHPF and SHPM pumps from serial number P08FF0001 onward, for the Zodiac Jandy ePump JEP variable speed pumps, and for the Flo Pro FHPM and VS-FHP variable speed models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e5\/8 in. or 13\/16 in.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStealth pumps changed shafts partway through production. Revision N and earlier impellers sat on a double stepped shaft and need a seal with a 13\/16 in. inside diameter on the ceramic. Revision P and later have no step where the impeller mounts, and those pumps take this 5\/8 in. seal. Check the revision or measure the shaft before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft seal is what keeps pool water out of the motor. Replace it every time the impeller comes off, and any time water weeps from the joint between the pump body and the motor. It is a small part that saves a motor.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624930160852,"sku":"TLD-101-2032","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7575685b-4ac7-4244-a991-50330f1c4588.png?v=1788655038"},{"product_id":"back-plate-kit","title":"Jandy Back Plate Kit","description":"\u003cp\u003eThe Jandy R0445200 back plate kit is the genuine Jandy rebuild kit for the seal end of the Stealth, PlusHP, MaxHP, WaterFeature and ePump pumps. It puts a new back plate, a new mechanical seal and new hardware in one box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne back plate, one carbon seal half and one ceramic seal half making up the R0479400 mechanical seal, one o-ring, and eight bolts with washers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the plate with the seal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ceramic half of the shaft seal seats in the back plate. If the plate is scored, pitted or cracked, a new seal will not hold for long. Replacing both at once, with fresh bolts instead of corroded originals, is the reliable way to stop a pump that leaks between the body and the motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJandy Stealth SHPF and SHPM, PlusHP PHPM and PHPF, MaxHP MHPM, WaterFeature WFTR and the ePump JEP1.5 and JEP2.0 variable speed pumps.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624930390228,"sku":"TLD-101-2030","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_810d0e86-72b6-4327-9378-066619458226.png?v=1788655062"},{"product_id":"seal-lid","title":"Jandy Lid Seal","description":"\u003cp\u003eThe Jandy R0446200 is the genuine lid seal for the Stealth SHPF and SHPM series pumps and the ePump JEP2.0 and JEP1.5 variable speed pumps. It seals the clear strainer lid to the pump body, and it is the first thing to check when a Jandy pump starts pulling air.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo o-rings, one kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit contains two o-rings of the same size, 8-1\/2 in. outside diameter and 8 in. inside diameter. One has a standard round cross section, the other a square cross section. Match the profile of the seal you removed and keep the other as a spare.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBubbles in the strainer pot, slow priming or a pump that loses prime after it shuts off all point to air getting in at the lid. If the seal is flattened, cracked or stiff it will not hold. Clean the groove, fit the new seal with a light coat of silicone lubricant and hand tighten the lid.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624959619284,"sku":"TLD-101-2019","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_eea52da1-e0fb-4c46-9c4c-ff0a1fdd0754.png?v=1788656554"},{"product_id":"pump-body-phpf-phpm","title":"Jandy Pump Body PHPF\/PHPM","description":"\u003cp\u003eThe Jandy R0448700 is the pump body housing for the PlusHP PHPF and PHPM series pool pumps. It is the genuine Jandy replacement for the wet end casing that the impeller and diffuser run inside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is the right repair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pump body cracks from a hard freeze or an impact, or its threads and sealing surfaces wear to the point that the pump loses prime or leaks at the housing. Replacing the body puts the original motor and hardware back to work without the cost of a complete pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your pump is a PHPF or PHPM series PlusHP. The lid and lock ring assembly with seal and the filter basket for these pumps are separate parts if you are rebuilding the whole wet end.\u003c\/p\u003e","brand":"Waterpik Technologies","offers":[{"title":"Default Title","offer_id":48624967057620,"sku":"TLD-101-2009","price":367.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_05627b25-3dcc-46bc-94e5-2432b68a7fc0.jpg?v=1788656839"},{"product_id":"pump-basket","title":"Jandy Pump Basket for FHPM\/FHP Series Pumps","description":"\u003cp\u003eThe Jandy R0480100 is the debris trap basket for Jandy FloPro pumps in the FHPM and FHP series, including the VS FloPro variable speed models. It sits in the strainer pot ahead of the impeller and catches leaves, twigs and anything else that makes it past the skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket is 9-9\/16 in. tall. The top rim measures 5-7\/16 in. outside and 4-9\/16 in. inside, and the bottom is 4-7\/16 in. across. Compare against your old basket before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eShut the pump off, open the lid, lift the old basket out and set the new one in place. Make sure it seats fully so the lid closes without pressing on the rim, which is the usual cause of a cracked basket.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624968630484,"sku":"TLD-101-2033","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b3065028-77dd-4d11-8017-929c02b53bfb.jpg?v=1788656882"},{"product_id":"mechanical-seal-13-16-id","title":"Jandy Mechanical Shaft Seal, 13\/16\" ID","description":"\u003cp\u003eThe Jandy R0445500 is the OEM mechanical shaft seal with a 13\/16 in. inside diameter on the ceramic. It fits the older Jandy Stealth SHPF and SHPM pumps, those with a serial number before P08FF0001, and the Polaris PB4-60 booster pump with a serial number after PB120111001 or starting at AVEH050100. It also appears in the Jandy PlusHP parts breakdown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the inside diameter matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Stealth impeller was originally made with a different shaft. Impeller revisions N and lower have a double stepped shaft and need a seal with a 13\/16 in. ID on the ceramic. Revisions P and higher have no step where the impeller sits on the motor shaft and need a 5\/8 in. ID seal, which is part R0479400. Fit the wrong one and the seal will not seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne seal, not two\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit used to include both seals. Since mid 2012 it ships with only the 13\/16 in. seal, part A0580500. The product photo still shows both for reference, but only one seal is in the box. If you need the 5\/8 in. seal, order R0479400.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624995893460,"sku":"TLD-101-2007","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_97cc5bb0-d6dc-40dc-86f3-6de09cd54b9f.jpg?v=1788661552"},{"product_id":"pump-filter-basket","title":"Jandy Filter Basket for PHPF\/PHPM\/MHPM Series Pumps","description":"\u003cp\u003eThe Jandy R0448900 is the strainer basket for the PlusHP PHPF and PHPM pumps, the MaxHP MHPM pumps and the WaterFeature WFTR series. It sits in the pump pot and catches leaves and debris before they reach the impeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBaskets crack with age and sun, and a broken handle makes emptying them a chore. Once there is a split or a hole, debris passes straight through to the impeller, so replace the basket rather than running without it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket only. The pump lid, lock ring and lid seal are separate parts.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624998482132,"sku":"TLD-101-2014","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_45b87c4b-1011-4191-b490-acb125725c93.jpg?v=1788661780"},{"product_id":"drain-plug-with-o-ring-set-of-2","title":"Jandy Drain Plug with O-Ring (Set of 2)","description":"\u003cp\u003eThe Jandy R0446000 is the drain plug used across most of the Jandy pump range, sold as a set of two plugs with two o-rings. Pull them to drain the pump housing for winter or for service, and put fresh ones in when the old o-rings have flattened or the plug threads have worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn pumps: the ePump JEP variable speed, Stealth SHPF and SHPM, PlusHP PHPF and PHPM, FloPro FHPM, WaterFeature WFTR, WaterFall SWF and MaxHP MHPM. The same plug also serves the Zodiac Legacy LRZE and LRZM heaters in the 125, 175, 250, 325 and 400 sizes, the LXi Low NOx 250, 300 and 400, and the Nature2 Fusion Soft and Inground purifiers, models FSOFT700, FSOFT1400 and FUSION.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the design change\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJandy has updated the design of this plug. If the new one does not look exactly like the one you took out, that is expected; it is the current factory replacement for the same port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThread the plug in by hand with its o-ring in place. A thin film of o-ring lubricant on the ring helps it seal without overtightening and keeps the plug from seizing before the next time you need it out.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625005920468,"sku":"TLD-101-2015","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2497a34b-d258-4d9d-be76-26230a1f4024.jpg?v=1788661959"},{"product_id":"pump-lid-seal-gasket-with-o-ring","title":"Jandy Pump Lid Seal Gasket with O-Ring","description":"\u003cp\u003eThe Jandy R0449100 kit replaces both sealing parts under the strainer lid on PlusHP, MaxHP and WaterFeature pumps: the lid seal gasket, which has a rectangular cross section, and the round o-ring. When a pump starts drawing air at the lid, these two parts are the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlusHP PHPF and PHPM, MaxHP MHPM and WaterFeature WFTR series pumps. The o-ring measures roughly 6-3\/16 in. outside, 5-13\/16 in. inside and 3\/16 in. thick. The seal is roughly 6-1\/8 in. outside, 5-3\/8 in. inside and 3\/8 in. front to back. Jandy gives these as approximate figures, so use them to confirm you have the right family of pump rather than as exact machining dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a worn seal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBubbles collecting under the clear lid while the pump runs, a pump that takes longer and longer to prime, or a lid you have to crank down harder each season to stop the hiss. Any of those points to the lid seal, and a new seal and o-ring are far cheaper than a lock ring cracked from overtightening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the lid groove and the housing face, seat the new seal and o-ring dry or with a light film of silicone based lubricant, and tighten the lid by hand.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625006018772,"sku":"TLD-101-2018","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a885e7ee-a9c9-489d-86f1-fb729c7ff196.jpg?v=1788661967"},{"product_id":"o-ring-backplate","title":"Jandy O-Ring, Backplate","description":"\u003cp\u003eThe Jandy R0446300 is the backplate o-ring used across the Jandy pump range. It is the genuine Jandy part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe back plate closes the rear of the wet end and carries the shaft seal. This o-ring is what keeps that joint tight. When it hardens and flattens, water weeps out at the seam and the pump can start to pull air on the suction side, which shows up as a low or unsteady water level in the strainer pot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlusHP PHPF and PHPM, MaxHP MHPM, Stealth SHPF and SHPM, ePump JEP variable speed, WaterFeature WFTR and WaterFall SWF series pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove before the new ring goes in and give it a thin coat of silicone o-ring lubricant. That helps it seat evenly and stops it pinching as the housing is drawn back together.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625722294484,"sku":"TLD-101-2020","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7de17e76-9b7a-4e89-845c-ec64871b1387.png?v=1788690004"},{"product_id":"2-x-2-5-pump-unions-0-75hp-2-5hp","title":"Jandy 2\" x 2.5\" Pump Unions, 0.75 HP to 2.5 HP","description":"\u003cp\u003eThe Jandy R0446101 is the genuine 2 inch by 2-1\/2 inch pump union tail piece for the Stealth and ePump ranges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJandy lists it for the Stealth SHPF and SHPM pumps in 3\/4 through 2-1\/2 horsepower, and for the ePump JEP variable speed pumps. It is the piece that joins the pump port to the plumbing and lets the pump come out without cutting pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnions weep for two reasons: a tired o-ring, or a tail piece that has cracked or distorted from overtightening and heat. If a fresh o-ring does not stop the drip, the tail piece itself has gone and needs changing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder the seal with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring for the tail piece is a separate Jandy part and is not listed as included here. Since the plumbing is already apart when you fit a new tail piece, it is worth having the o-ring on hand rather than making a second trip.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625742872788,"sku":"TLD-101-2016","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c22b7d82-5bef-4ca4-b683-b92b40441196.png?v=1788690530"},{"product_id":"1-5hp-impeller-w-o-ring-screw-fhpm","title":"Jandy 1.5 HP Impeller with O-Ring and Screw, FHPM","description":"\u003cp\u003eThis is the Jandy R0479603, the 1.5 HP impeller for the FloPro FHPM series pump, supplied with the impeller o-ring and the screw that holds it on the shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the horsepower\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers are cut for a specific horsepower. The FHPM series runs across several sizes, and fitting the wrong impeller changes what the pump does at the same motor speed. This is the 1.5 HP part, so confirm the horsepower on your pump label before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a tired impeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeak flow that survives a clean basket, a clear skimmer and a sealed lid usually points at the impeller. Vanes wear thin over years, and the passages inside pack with hair, grit and small debris that a rinse will not shift. A new impeller with a fresh o-ring restores the flow the pump was built to deliver.\u003c\/p\u003e\u003cp\u003eBecause the o-ring and screw come in the box, the change is a single part order rather than three.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625749164244,"sku":"TLD-101-2038","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f979764e-5ad3-4d84-b4f1-a07a2caf4f2d.jpg?v=1788691665"},{"product_id":"2hp-fr-shp-php-impeller-kit-w-screw-oring","title":"Jandy SHP Stealth and PHP Impeller Kit, 2 HP Full Rated","description":"\u003cp\u003eThe Jandy R0807200 is the factory impeller kit for SHP Stealth and PHP pumps, in the 2 HP full rated size that Jandy also lists as 2.5 HP uprated. It arrives as a kit: the impeller, its screw, and the backplate O-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the kit and not just the impeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGetting to the impeller means opening the pump, which means disturbing the backplate O-ring. That seal is included here, so the pump goes back together sealed rather than being reassembled on a flattened O-ring that leaks air and loses prime a week later. The impeller screw is in the box for the same reason.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the part to the pump\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers are cut for a specific horsepower. Fitting the wrong one changes what the pump does to the whole system, so read the rating off your motor before ordering. If the flow has dropped off with a clean basket and a clean filter, the impeller is the usual culprit, either packed with debris or worn on the vanes.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625785995476,"sku":"JDY-101-1005","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dd7a56de-8dea-4ded-80a1-3b0532fbc164.jpg?v=1788692460"},{"product_id":"diffuser-w-o-ring-screw","title":"Jandy Diffuser with O-Ring \u0026 Screw FHPM 1.5-2.5 HP","description":"\u003cp\u003eJandy R0479701 is the replacement diffuser for Flo Pro FHPM pumps rated from 1.5 to 2.5 HP. It ships as a set: the diffuser, its o-ring and the mounting screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the diffuser does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser sits directly over the impeller and holds a tight clearance against it. That clearance is what converts the impeller spin into pressure instead of letting water churn in the volute. Wear the clearance out, and the pump keeps running while flow and head both fall away.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSigns it is due\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReduced flow at the returns, a filter that no longer builds pressure the way it used to, or visible scoring and cracking around the diffuser throat all point the same direction. Because the impeller runs inside it, check both parts while the wet end is open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring and screw come in the box, so the diffuser can go straight back in once the old one is out. Lubricate the o-ring before reassembly and seat the screw evenly.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625789829332,"sku":"TLD-101-2039","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d926adf2-98ad-4349-8bda-3b87c54efa69.png?v=1788700097"},{"product_id":"1hp-impeller-w-o-ring-screw","title":"Jandy 1 HP Impeller with O-Ring and Screw","description":"\u003cp\u003eThe Jandy R0479602 is the 1 HP impeller for the FloPro series pump, supplied with its o-ring and retaining screw. It is the genuine Jandy part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the impeller does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller is the spinning vane pack behind the diffuser that actually moves the water. Everything downstream, filter pressure, heater flow, cleaner performance and skimming, depends on it. When a vane cracks or the passages pack with grit and hair, flow drops off and stays down no matter how often the baskets get cleaned.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers are horsepower specific. This one is the 1 HP part, so check the horsepower on the pump label. The listing names the FloPro FHPF pumps and the parts diagram covers the FHPF and FHPM series, so match the model on your pump plate as well.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625815912660,"sku":"TLD-101-2037","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1cff4e4b-e0c1-4c10-86f4-cb288c774297.jpg?v=1788700493"},{"product_id":"o-ring-tail-piece-set-of-2","title":"Jandy O-Ring, Tail Piece (Set of 2)","description":"\u003cp\u003eJandy R0446400 is the tail piece o-ring, supplied as a set of two. It seals the union tail pieces on Jandy pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery Jandy pump connects to the plumbing through unions. The tail piece threads into the pipe, the nut pulls it up against the pump port, and this o-ring is the only thing making that joint watertight. Because there is one at the suction side and one at the discharge, Jandy sells the o-ring in pairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA union that weeps or drips at the nut is almost always an o-ring problem, not a tightness problem. Once the rubber has hardened, cracked or taken a permanent flat spot, tightening the nut harder just distorts it further. Back the union off, pull the old o-ring, wipe the groove clean, fit the new one with a pool grade lubricant and hand tighten the nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis o-ring is listed for the Jandy Stealth series pumps, the Jandy ePump variable speed pumps and the Jandy WaterFall series pumps.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626104729812,"sku":"TLD-101-2021","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_24b7168c-b731-4b61-a7ba-5bf631c0213a.png?v=1788704836"},{"product_id":"diffuser-impeller-hardware-kit","title":"Jandy Diffuser and Impeller Hardware O-Ring Kit","description":"\u003cp\u003eJandy R0446500 is the hardware kit for the diffuser and impeller on a Jandy pump wet end. It is the genuine Jandy part, supplied with the O-rings that seal those components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it covers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a Jandy pump is opened for an impeller or diffuser change, a handful of small fasteners and O-rings come out with it. Those are the parts that get dropped, stretched or left flattened from years of service, and they are the ones that decide whether the rebuilt pump holds prime. This kit is that hardware, packaged together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is used across the Jandy pump range: PlusHP, MaxHP, Stealth, WaterFall, WaterFeature and the ePump variable speed models. Check the model on your pump label against the list before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder it with the rebuild\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump has to be open to fit this kit, so it makes sense to have it on hand before the teardown starts rather than after.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626208374996,"sku":"TLD-101-2022","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_293fd6e2-26d1-4dae-9f85-aba4801f36c0.png?v=1788706046"},{"product_id":"blue-pressure-o-ring","title":"Jandy Blue Pressure O-Ring","description":"\u003cp\u003eThe Jandy R0479000 is the blue pressure O-ring used on Jandy Stealth, WaterFall and ePump variable speed pool pumps. It is the genuine Jandy replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe blue O-ring seals the pressure connection on the pump. It is a small part with an outsized job: once it hardens, flattens or nicks, the joint weeps and the pump can pull air instead of holding a clean prime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove before the new ring goes in, and use a thin film of silicone based O-ring lubricant so it seats evenly rather than rolling or pinching as the joint is drawn together. Do not reuse the old ring; rubber that has been compressed for a season or two takes a set and rarely reseals.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626208964820,"sku":"TLD-101-7100","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4c63fd76-dca8-4c96-b980-686145c17aca.jpg?v=1788706061"},{"product_id":"pump-union-assembly-2-x-2-set-of-2","title":"Jandy 2\" x 2\" Tailpiece O-Ring and Union Nut Kit, Set of 2","description":"\u003cp\u003eThe Jandy R0327301 is the 2 in. by 2 in. tailpiece O-ring and union nut kit for Jandy FloPro pumps, supplied as a set of two. It is the genuine Jandy part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo union nuts with their tailpiece O-rings. That covers both the suction and the discharge side of the pump, so the whole pair is renewed rather than half of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnion nuts take the load every time the pump is disconnected for service, and they sit in sun and pool chemistry the rest of the time. They craze, crack and eventually split under the tightening torque. The O-ring behind the tailpiece hardens on a slower schedule but ends up weeping in the same way. Either one shows as a persistent drip at the pipe joint that no amount of retightening cures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is used on the Jandy FloPro FHPF and FHPM series pumps and on the VS FloPro variable speed models.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626209685716,"sku":"TLD-101-2046","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_84517c9c-298c-479a-b010-1c899bd69aca.png?v=1788706097"},{"product_id":"o-ring-2","title":"Jandy Backplate O-Ring for FHPM and VS-FHP Series Pumps","description":"\u003cp\u003eThe Jandy R0480300 is the backplate o-ring for the FloPro FHPF and FHPM series and the VS FloPro series pumps. It is the genuine Jandy part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring sits in the joint where the pump body meets the backplate. On the suction side of the system that joint is holding vacuum, not pressure, so a ring that has hardened or taken a set pulls air into the pump instead of dripping water out. The result looks like a priming problem: bubbles in the lid, a basket that never fills, weak flow at the returns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny time the pump is opened. The backplate has to come off to reach the shaft seal, and a used o-ring that has spent years compressed in its groove will not reseat the way a fresh one does. Wipe the groove clean, fit the new ring dry or with a silicone lubricant, and draw the band or bolts up evenly.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626388173012,"sku":"TLD-101-2034","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d8c053e8-017c-4ed1-9e90-537c5923fd1c.png?v=1788709657"},{"product_id":"lid-o-ring-fhp","title":"Jandy FloPro Lid O-Ring, FHP","description":"\u003cp\u003eThe Jandy R0480200 is the lid O-ring for FloPro pumps, the seal that sits between the strainer pot and its clear lid. It covers the FHPF and FHPM series and the variable speed VS FloPro, and it is the genuine Jandy part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters more than it looks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis ring is the only thing keeping the suction side of the pump airtight at the lid. Once it hardens, flattens or takes a set from years of being clamped down, air gets pulled in past it. The pot fills with bubbles, the pump struggles to prime, and flow to the filter drops off. Owners often start pulling the pump apart when a two dollar seal is the whole problem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTake the lid off, lift the old ring out of its groove and clean the groove out. Wipe a silicone based O-ring lubricant around the new ring, seat it evenly all the way round, and refit the lid. The lubricant is worth using: it helps the ring seal on first start and keeps it from sticking to the lid the next time you empty the basket.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626562072788,"sku":"TLD-101-2036","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a8f87db6-8cdb-4f19-ac32-6c27226dbca3.png?v=1788712486"},{"product_id":"go-kit82v-9-viton-jandy-shp-pump-seal-kit","title":"SuperPro Jandy SHPF and SHPM Series Viton Seal Kit","description":"\u003cp\u003eThis is SuperPro GOKIT82V-9, the Viton gasket and o-ring kit for Jandy Stealth pumps in the SHPF and SHPM series. SuperPro calls the set Go-Kit 82.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump seals age together. When one o-ring has hardened and started to weep, the rest are usually the same age and the same condition. Buying the set means the pump goes back together with fresh seals throughout, instead of a mix of new and tired ones that has you back in the pump next season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eViton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the Viton version. Viton stands up to heat and pool chemistry better than standard rubber, which matters at an equipment pad that gets hot and sees chlorinated water day in and day out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck that your pump is a Jandy Stealth in the SHPF or SHPM series. Jandy built several pump families with different seal sets, and the kits are not interchangeable between them.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48626725126356,"sku":"SPG-601-6095","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-601-6095-_1a.png?v=1788714057"},{"product_id":"impeller-screw-w-o-ring","title":"Jandy Impeller Screw with O-Ring","description":"\u003cp\u003eThe Jandy R0515400 is the impeller screw with O-ring used across most of the Jandy pump line. It is a 1\/4 inch by 20 screw, one inch long, with a reverse thread, and it ships with the O-ring that seals it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the reverse thread matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller turns constantly while the pump runs. A conventional right hand thread in that position tends to back itself off, so Jandy specifies a left hand, reverse thread screw. That is the single reason a similar looking fastener from a hardware bin is not a substitute, and it is also why the screw comes off the opposite way to what most people expect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnyone pulling an impeller for a seal change, a clog or a wear inspection is handling this screw, and it is common for the head to be chewed or the O-ring to be flattened by the time it comes out. Replacing both while the pump is open is cheap insurance against a leak path at the impeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe screw covers the ePump and ePump Pro variable speed pumps, the FloPro and VS FloPro families, FloPro FHPM, WaterFall SWF, WaterFeature WFTR, Stealth SHPF and SHPM, and PlusHP PHPF and PHPM.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626845679828,"sku":"TLD-101-2047","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_85616c0e-88ce-44a0-8361-f3f7ef353a79.png?v=1788715818"},{"product_id":"jandy-r0807202-shp-stealth-php-plushhp-impeller-kit","title":"Jandy Impeller Kit for Stealth SHPF\/SHPM and PlusHP PHPF\/PHPM Pumps","description":"\u003cp\u003eJandy R0807202 is the impeller kit for the Stealth series pumps, models SHPF and SHPM, and the PlusHP series pumps, models PHPF and PHPM. It is the genuine Zodiac Pool Systems part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the impeller does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller is the spinning vane set inside the pump volute. It is what actually moves water, so the flow reaching the filter, the heater and the returns is set by its condition. Vanes wear over the years, and the narrow passages between them catch hair, grit and small debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe classic sign is a pump that starts and runs normally, with a clean strainer basket and a clean filter, but noticeably weaker flow at the returns than it used to have. That points at the impeller rather than the motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJandy fits different impellers to different ratings within the same series, so read the model and rating from the pump label and confirm it matches before you order.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626870550740,"sku":"JDY-101-1007","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/JDY-101-1007_1a.png?v=1788716065"},{"product_id":"mechanical-seal-5-8-id-generic","title":"U.S. Seal Mechanical Seal, 5\/8\" ID (Generic)","description":"\u003cp\u003eThis is a generic mechanical shaft seal with a 5\/8 inch inside diameter on the ceramic, in the usual carbon and ceramic pairing. It is listed for Jandy Pro Series pumps including the FHPM and the VS FloPro.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo seals, two shafts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Stealth impeller was originally made with a different shaft. Revision N and lower had an impeller with a double stepped shaft, and those older pumps need a shaft seal with a 13\/16 inch inside diameter on the ceramic. Revision P and higher have no step where the impeller goes onto the motor shaft, and those newer pumps take the 5\/8 inch inside diameter ceramic, which is this seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck before you buy\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe revision letter and the shaft itself are what decide this, not the pump model on the label. Pull the old seal, measure the bore of the ceramic, and match it. A 13\/16 inch version of this seal is available separately for the older shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric, not OEM\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an aftermarket seal built to the same dimensions as the original rather than a factory branded part.\u003c\/p\u003e","brand":"US Seal","offers":[{"title":"Default Title","offer_id":48627575914708,"sku":"USS-OLD-4231","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_59bed974-09c3-44ad-920c-d1ded680514e.png?v=1788723830"},{"product_id":"tail-piece-o-ring-mhpm","title":"Jandy Tail Piece O-Ring","description":"\u003cp\u003eThe Jandy R0449200 is the tail piece O-ring used on the MaxHP, PlusHP and WaterFeature series pumps. It is the genuine Jandy part for that joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tail piece is the fitting that carries water between the pump and the pool plumbing. The O-ring is the only thing holding that joint watertight. On the suction side a tired ring rarely drips much; instead it draws air, and the pump holds a bubble in the lid, loses prime and moves less water. On the pressure side it simply weeps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove and the mating face before the new ring goes in, and wipe on a thin film of pool grade silicone lubricant so it seats evenly rather than rolling. If the pump is already apart for another repair, this is a sensible ring to renew while access is easy.\u003c\/p\u003e","brand":"Waterpik Technologies","offers":[{"title":"Default Title","offer_id":48627728351444,"sku":"TLD-101-2029","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_372266d5-a8da-435e-8b7a-d8f71a41c12d.jpg?v=1788727362"},{"product_id":"2-hp-impeller-kit","title":"Jandy FHPF 2 HP Impeller Kit","description":"\u003cp\u003eThe Jandy R0479604 is the 2 HP impeller kit for the FHPF pump. It arrives as the impeller with its screw and o-ring, which is everything needed to mount it on the shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImpellers are horsepower specific\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller is matched to the motor it runs behind. This kit is the 2 HP part, so it goes on a 2 HP pump. Fitting an impeller from another horsepower changes what the pump does to the system and is not a substitution worth making.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy an impeller gets changed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo reasons dominate. The first is wear, where flow drops away slowly over years even though the motor sounds fine and the basket and filter are clean. The second is damage, where something has been drawn through the pump and broken the vanes. In either case the impeller can no longer do the work the motor is asking of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the pump is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mechanical seal is a separate part. Most people fit a new seal at the same time rather than open the pump twice.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48627736608980,"sku":"TLD-101-2044","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0bc8a94d-6e90-483b-98f6-0d881434b19c.jpg?v=1788727533"},{"product_id":"diffuser-w-o-ring-screw-1","title":"Jandy Diffuser with O-Ring and Screw, R0479702","description":"\u003cp\u003eThe Jandy R0479702 is the pump diffuser for FloPro pumps, supplied with its O-ring and mounting screw. It is listed for the FloPro FHPM models from 0.75 through 2.5.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the diffuser matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller throws water outward at speed. The diffuser is the shaped housing around it that converts that speed into pressure and feeds it into the volute. When the diffuser cracks or wears at the nose, water recirculates inside the pump instead of leaving it, and the whole system loses flow even though the motor sounds normal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser comes with the O-ring that seals it and the screw that holds it, so nothing else has to be ordered to complete that part of the job. The impeller and the mechanical seal are separate parts, and both are worth a look while the wet end is apart.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48627752304852,"sku":"TLD-101-2040","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_26b060eb-2d97-4199-ba98-fab3a36bc45d.png?v=1788727719"},{"product_id":"jandy-1-5hp-fr-shp-php-impeller-kit-with-screw-o-ring","title":"Jandy 1.5 HP FR SHP\/PHP Impeller Kit with Screw and O-Ring","description":"\u003cp\u003eThis is the Jandy R0807201 impeller kit for 1.5 HP pumps, supplied with the impeller screw and the o-ring that seals it. It is the genuine Zodiac Pool Systems part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit covers three Jandy pump families at 1.5 HP: the ePump variable speed range, which includes JEP1.5, JEP2.0, VSSHP220 and VSSHP270, the Stealth series SHPF and SHPM, and the PlusHP series PHPF and PHPM. The impeller is matched to horsepower rather than to a single model, so confirm the horsepower of your wet end before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn impeller that is packed with debris or worn at the vanes still spins, so the pump sounds normal while the pool tells a different story: weak returns, slow skimming and low pressure at the filter with a clean basket. Pulling the wet end and fitting a fresh impeller restores the flow the pump was built to move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe small parts matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe screw and o-ring are included for a reason. Both are easy to distort or drop during removal, and reusing a flattened o-ring is a common cause of a rebuild that never quite primes.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48627967394004,"sku":"JDY-101-1006","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/JDY-101-1006_1a.png?v=1788731898"},{"product_id":"2-1-2-hp-impeller-w-screw-back-up-plate-o-ring","title":"Jandy 2-1\/2 HP Impeller with Screw and Back-Up Plate O-Ring","description":"\u003cp\u003eJandy R0479605 is the 2-1\/2 HP impeller for the FloPro pump family, supplied as a set with the impeller screw and the back-up plate O-ring. It is the genuine Jandy part, the same impeller the pump left the factory with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the impeller matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller is what actually moves the water. Vanes wear open, debris packs into the eye, and the pump slowly loses the flow it was rated for. Owners tend to read that as a filter problem or a failing motor, but a pump that primes normally and still returns weak flow is usually telling you the impeller is finished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree pieces: the impeller itself, the screw that holds it on the shaft, and the O-ring for the back-up plate. Having the O-ring in the box matters, because it is the part most likely to be damaged coming apart and the one that stops a rebuild dead if it is missing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 2-1\/2 HP impeller, used on the Jandy VS FloPro and on the FloPro FHPF and FHPM series. Horsepower is not interchangeable within the range, so match the rating on your motor plate before ordering.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48627982500052,"sku":"JDY-101-9605","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7b1e5c38-cec7-4313-ad99-a5777220970c.jpg?v=1788732288"},{"product_id":"jandy-r0807203-75hp-fr-shp-php-impeller-kit-with-screw-o-ring","title":"Jandy .75 HP FR SHP\/PHP Impeller Kit with Screw and O-Ring","description":"\u003cp\u003eJandy R0807203 is the 0.75 horsepower impeller kit for the Stealth series pumps, models SHPF and SHPM, and the PlusHP series pumps, models PHPF and PHPM. It is the genuine Zodiac Pool Systems part and includes the impeller screw and o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the horsepower\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump impellers are cut for a specific horsepower rating. This kit is the 0.75 HP version, so check the rating on your motor plate before ordering. An impeller from a different horsepower will physically fit but will not give the flow the pump and filter were sized around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeak return jets and lazy skimming, with a clean filter and an empty pump basket, usually mean the impeller. Hair and fine debris pack into the vanes, and the vanes themselves wear thin over years of running. Because the screw and o-ring come in the kit, the job can be done in one go rather than waiting on small parts.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48628750188756,"sku":"JDY-101-1008","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/JDY-101-1008_1a.png?v=1788749708"},{"product_id":"pump-body-mhpm","title":"Jandy Pump Body MHPM","description":"\u003cp\u003eThe Jandy R0448701 is the genuine pump body for the MaxHP MHPM series and the WaterFeature WFTR series pumps. It is the Zodiac built factory housing, listed on the parts breakdowns for both pump families.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the body does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump body is the casting that the impeller spins inside and that the suction and discharge plumbing bolt to. It shapes the flow and it holds pressure, which is why a fault here shows up as a leak that no amount of new seals will stop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFreeze damage is the most common reason, followed by a cracked volute and threads stripped at a port from an over tightened fitting. When the motor is still healthy, replacing the body is worth doing instead of buying a whole new pump. The lid, lock ring and seals are separate parts, so inspect them while the pump is open.\u003c\/p\u003e","brand":"Waterpik Technologies","offers":[{"title":"Default Title","offer_id":48628835909844,"sku":"TLD-101-2010","price":383.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e2e1b726-f94f-44b2-888e-640cccf453a7.jpg?v=1788753822"},{"product_id":"2-1-2s-x-3spg-pump-unions-3-hp","title":"Jandy 2-1\/2\" Slip x 3\" Spigot Pump Unions, 3 HP","description":"\u003cp\u003eR0446102 is the Jandy pump union set, a 2-1\/2 inch slip socket on one end and a 3 inch spigot on the other, supplied two per package. It is listed for Jandy Stealth series pumps in the 3.0 to 5.0 hp range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pump plumbed with unions comes off the pipe in minutes. A pump plumbed without them means a saw, fresh pipe and a day of glue curing before the pool runs again. When a union nut cracks or the joint starts weeping, replacing it is the cheap end of that choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe set is described both as 2-1\/2 inch by 3 inch and, in some references, as 2 inch by 3 inch. The part number has not changed, so match R0446102 and measure the existing union before cutting into the plumbing.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48629510930644,"sku":"TLD-101-2017","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1e0b22c5-1fa6-4681-92a2-61e1ec268491.png?v=1788765997"},{"product_id":"zodiac-r0622000-jandy-pro-series-diffuser-o-ring","title":"Jandy Pro Series Diffuser O-Ring","description":"\u003cp\u003eThe Jandy R0622000 is the diffuser o-ring used across the Jandy Pro Series pumps. It is listed for the VS FloPro series, the ePump with SVRS, the ePump JEP variable speed pump, the Stealth series and the FloPro series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser sits over the impeller and directs water into the discharge. The o-ring is what keeps that path closed against the housing. When it hardens, flattens or splits, water that the impeller has just accelerated leaks back around the diffuser instead of leaving the pump, and the pool sees less flow for the same energy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny time the pump housing comes apart, this seal should go back in new. It is a cheap part compared with pulling the pump down a second time, and rubber that has been compressed and heated for years does not seat properly once it has been disturbed. A light coat of pool rated silicone lubricant helps it seat cleanly.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48633989431508,"sku":"TLD-101-1102","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e81f637b-74d0-45ca-80fa-d465507e3fcb.jpg?v=1788823451"},{"product_id":"jandy-r0807205-3hp-shp-impeller-kit-with-screw-o-ring","title":"Jandy 3 HP SHP Impeller Kit with Screw and O-Ring","description":"\u003cp\u003eJandy R0807205 is the 3 horsepower impeller kit for Stealth series pumps, supplied with the impeller screw and the o-ring so the job can be finished in one go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched to horsepower\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn impeller is machined for a particular horsepower rating. It is not a generic part that suits every pump in the family, so the 3 HP figure has to match the pump you are working on. Jandy lists this kit for the Stealth series SHPF and SHPM pumps in the SHP and PlusHP line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSigns of a failing impeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlow that has dropped off, a skimmer that no longer pulls and a pump that runs but moves little water are the usual symptoms once the basket, the lid o-ring and the filter have been ruled out. Debris packed into the vanes, worn edges or a cracked shroud all cost flow. Since the impeller comes off during the same teardown as the shaft seal, it is worth inspecting the seal at the same time.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48634377502932,"sku":"JDY-101-1010","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/JDY-101-1006_1a_f9b6b6c1-1fe9-47c2-be18-dd158d1936e9.png?v=1788828794"},{"product_id":"base-spacer-large","title":"Jandy FloPro Base Spacer, Large","description":"\u003cp\u003eThe Jandy R0546400 is the large base spacer for the FloPro pump. It is a new genuine Jandy part and its job is simple: it sits the pump higher than the standard base that comes in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeight matters more on a pump swap than it looks like it should. Suction and return pipes come out of the ground at a fixed height, and if the new pump sits lower than the one it replaced, that difference has to be made up somewhere, either in fittings or in re-cut pipe. Adding the large spacer under the pump is the tidier way to close the gap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe spacer goes under the FloPro in place of the standard base. Set the pump on it, check that the ports line up with your plumbing before you glue anything, and secure the pump as you normally would.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48634493796564,"sku":"JDY-101-6400","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7818eeb8-e848-4acb-bafd-32f17507bd26.jpg?v=1788832782"},{"product_id":"screw-w-o-ring-self-sealing-jhp-series","title":"Zodiac STEALTH SCREW W\/O-RING | R0398800","description":"\u003cp\u003eZodiac STEALTH SCREW W\/O-RING. OEM part number R0398800.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48649703424212,"sku":"TLD-101-3988","price":11.51,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/104127_1_2010723145914.jpg?v=1789059432"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/jandy-pump-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}