{"title":"Kreepy Krauly","description":"\u003cp\u003eKreepy Krauly pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"prowler®-920-930-motor-unit","title":"Pentair Prowler 920\/930 Motor Unit","description":"\u003cp\u003eThe Pentair 360365 is the replacement motor unit for the Kreepy Krauly Prowler 920 and Prowler 930 robotic pool cleaners. It is a genuine Pentair OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe part that does the work\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery Prowler cleans with a high speed front scrubbing action that works the floor and the walls, and the motor unit is what drives it. When the motor is worn the cleaner slows, stalls or stops climbing, and the fix is to replace the unit as a whole rather than attempt a repair inside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeep the rest of the robot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA new motor unit goes into the existing body and works with the cable, brushes and filters you already have. Front brush assemblies, cartridge filter kits and the 930 communication cable are available separately if those need attention at the same time.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624549036244,"sku":"KPY-201-0238","price":671.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_48212bb1-3504-4da0-9284-9c3892082de5.jpg?v=1788643246"},{"product_id":"prowler-930®-communication-cable","title":"Pentair Prowler 930 Communication Cable","description":"\u003cp\u003ePentair 360446 is the genuine replacement communication cable for the Kreepy Krauly Prowler 930 robotic pool cleaner. It is the link between the cleaner and its power supply, and it is the part on a robot that sees the hardest life: twisting on every turn, sun on the deck, and chlorine in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCuts or exposed wire along the jacket, a kink that will not straighten, or a cleaner that stops mid-cycle or will not respond are the usual signs. A new cable restores the cleaner without touching the drive or the power supply.\u003c\/p\u003e\u003cp\u003eThis is the cable only. The power supply is a separate Pentair part.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624555426004,"sku":"KPY-201-0309","price":354.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3836ed8f-3a16-4389-9dd6-336f07e33052.jpg?v=1788643340"},{"product_id":"communication-cable-with-swivel-for-prowler-920-aboveground-pool-cleaner","title":"Pentair Communication Cable with Swivel for Prowler 920 Aboveground Pool Cleaner","description":"\u003cp\u003eThe Pentair 360499 is the communication cable with swivel for the Kreepy Krauly Prowler 920 aboveground robotic pool cleaner. It is the genuine Pentair replacement, supplied as the cable and swivel together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cable is the part of a robot that takes the most abuse: it is coiled and uncoiled every session, pulled across the deck and left out in the sun. The swivel on this assembly is what lets the cable unwind itself as the cleaner turns, so when the swivel wears or the cable jacket cracks, this is the part to replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your cleaner is the Prowler 920 aboveground model. The cable is sold on its own; the power supply is not included.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624885235924,"sku":"KPY-201-0535","price":265.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_430136da-80b5-4df8-b13a-a4d235995359.jpg?v=1788649744"},{"product_id":"letro-legend-pool-cleaner","title":"Pentair Kreepy Krauly Legend Pool Cleaner","description":"\u003cp\u003eThe Pentair Kreepy Krauly Legend, part LL505G, is a pressure side automatic cleaner for inground residential pools. It runs off a dedicated booster pump, sold separately, which gives it its own power source rather than sharing suction with the skimmer and main drain. Longtime pool owners will know it as the Letro Legend; it is the same cleaner under the Pentair name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for leaves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Legend has a large intake throat, so it takes large leaves as easily as it takes sand and silt. It is rated for small, medium and large leaves, which makes it a good match for pools under trees where a smaller throat would clog. While the head works the floor, the surface skimming action carries on unimpeded.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlan on a booster pump if you do not already have one plumbed in. The standard Legend is the version listed here; a gray version is available separately for darker pool finishes.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624938680532,"sku":"LET-20-5005","price":789.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_071f7d3e-bc6c-47dd-a9c1-02024082aa9b.jpg?v=1788655841"},{"product_id":"letro-legend-ii-grey-white","title":"Pentair Letro Legend II Pressure Side Pool Cleaner, Grey\/White","description":"\u003cp\u003eThe Pentair Letro Legend II is a pressure side cleaner for in ground residential pools that does its work without a booster pump. It plugs into the return line and uses the pressure your main pump already produces, which keeps the operating cost down and skips a second pump on the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it cleans\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA dual jetted design forces water through the unit to create a strong vacuum. That vacuum lifts dirt, sand and small to medium leaves off the floor and into the cleaner as it travels the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the grey top, white bottom version, part LX5000G. The same cleaner is also made in all grey if you prefer a single color.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624971120852,"sku":"LET-20-5000","price":847.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_040aa3a3-04c3-4310-917e-0ca78b358da3.png?v=1788656986"},{"product_id":"kreepy-krauly-platinum-automatic-pool-cleaner","title":"Pentair Kreepy Krauly Platinum Automatic Pool Cleaner","description":"\u003cp\u003eThe Pentair Kreepy Krauly Platinum is a pressure side cleaner for inground pools, powered by a dedicated booster pump. It is built for pools that take a beating from leaves and landscaping debris: a large debris channel and wide intake throat pick up big leaves whole, and the debris bag keeps them out of your skimmer and filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrive and coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDual thrust jets give it the push to finish most pools in 1 to 3 hours. Front wheel drive and heavily treaded tires keep traction on slopes and walls, and the four wheel layout resists the tipping that three wheel cleaners are prone to, so it keeps running unattended. Pentair credits the light frame and tire design with four times the wall coverage of earlier designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePools and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt works on concrete, vinyl lined and fiberglass pools and is recommended for lighter colored finishes. The head is gray on top and white underneath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cleaner head, a 30 ft hose, a back-up valve, a debris bag, a universal wall connect fitting and the warranty card. Because the booster pump drives the cleaner, your main circulation and skimmer keep working at full strength while it runs.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624987177172,"sku":"LET-20-250","price":854.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5b3454b5-1aea-4bd3-bd63-dbc51a40408a.png?v=1788661426"},{"product_id":"pleated-seal-inground-pool-cleaner","title":"Kreepy Krauly Pleated Seal Inground Pool Cleaner","description":"\u003cp\u003eThe Kreepy Krauly is the suction side cleaner that has stayed in service for decades because there is almost nothing on it to break. It has one moving part. No gears, no belts, no debris bag, no wheels. It runs off the pool's own pump and filter, travels the floor and climbs the walls, and pulls dirt and debris into the filtration system as it goes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAny inground pool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis model, part 360042, is made for inground concrete, vinyl and fiberglass pools. It is rated for everything from small leaves to piles of leaves, which makes it a good match for pools under trees.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePleated seal or flat seal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the pleated seal version. It works on every surface, but on gunite or plaster the pleated seal wears a little faster than the flat seal. If your pool is gunite or plaster, the flat seal Kreepy Krauly is the recommended choice. For vinyl and fiberglass, this one is the pick.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624996647124,"sku":"KPY-20-601","price":486.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f6b9c94c-a4c1-4bee-8967-4d86bbd62d78.jpg?v=1788661610"},{"product_id":"prowler-930-920-cartridge-filter-kit","title":"Pentair Prowler 930\/920 Cartridge Filter Kit","description":"\u003cp\u003eThe Pentair 360363 is the genuine replacement cartridge filter kit for the Kreepy Krauly Prowler 920 and Prowler 930 robotic pool cleaners. A clean cartridge is what lets a robot pull full flow through its pump and trap the fine debris that settles on a pool floor, so this is the first part to replace when a Prowler starts leaving silt behind.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a direct replacement for the cartridge already in the cleaner. Rinse the cartridge after each run; once the media no longer comes clean, swap in this kit. The filter basket that holds it is a separate part if yours is damaged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair builds the Prowler line to cover pools from aboveground through large inground installations, and this is the OEM cartridge made for the 920 and 930.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625019846868,"sku":"KPY-201-0231","price":171.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_625c1e5e-1e34-4d1f-8c5e-c18f1401eb05.jpg?v=1788662221"},{"product_id":"prowler-920-930-filter-basket","title":"Pentair Prowler 920\/930 Filter Basket","description":"\u003cp\u003eThe Pentair 360362 is the filter basket for the Kreepy Krauly Prowler 920 and Prowler 930 robotic pool cleaners. It is the genuine Pentair OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProwler robots use high speed front scrubbing to clean the whole pool, walls included, and everything they lift ends up in this basket. When the mesh tears or the frame cracks, debris starts getting past it, and a new basket puts the cleaner back to full performance.\u003c\/p\u003e\u003cp\u003eMany owners keep a second basket so one can dry while the other is in the cleaner.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625023451348,"sku":"KPY-201-0232","price":247.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/KPY-201-0232_1a.png?v=1788662672"},{"product_id":"letro-debris-bag-with-snaplock","title":"Pentair Letro Legend Debris Bag with Snaplock","description":"\u003cp\u003eThe Pentair 360002 is the Letro Legend debris bag with the snaplock closure system. It is the genuine factory bag for the Kreepy Krauly Legend family of pressure side pool cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich cleaners\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLegend LL105, LL505G and LL505GG, Legend II LX 2000, LX5000G and LX5000GG, and Legend Platinum LL105PM and LL105PMT. That covers the three wheel and four wheel Legend heads as well as the Legend II models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe snaplock closure\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInstead of a tie or drawstring, the bag closes with a snaplock. Emptying it is a matter of unsnapping, tipping the debris out and snapping it shut again, which matters on a cleaner that gets emptied after most cycles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBags are a wear part. They drag across the pool floor every run, and eventually the mesh thins or a seam opens and leaves start escaping back into the water. A fresh bag puts the cleaner back to full capture.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625724227796,"sku":"LET-201-0002","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_54b55294-73b3-43fb-b243-6eb6ef2c98fe.jpg?v=1788690115"},{"product_id":"pentair-360140-cartridge-assembly-for-kreepy-krauly-prowler-820-830-model-pool-cleaner","title":"Pentair Cartridge Assembly for Kreepy Krauly Prowler 820 and 830 Pool Cleaners","description":"\u003cp\u003eThe Pentair 360140 is the genuine cartridge assembly for the Kreepy Krauly Prowler 820 and Prowler 830 robotic pool cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Prowler carries its own filtration. Everything the cleaner lifts off the floor and walls stays inside this cartridge until you pull it out and rinse it, which means the cartridge decides how much the machine can pick up in one run and how strongly it keeps pulling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRinse the cartridge at the end of each cycle. Replace it once the pleats no longer come clean, once the media is torn, or once the assembly has lost its shape and no longer seats properly. A cleaner that drives its normal pattern but leaves dirt behind is usually telling you the cartridge is finished.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRunning a spare\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMany owners keep a second cartridge on hand. The cleaner goes back in the water immediately while the used cartridge dries, and a dry cartridge shakes out far more cleanly than a wet one.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625742610644,"sku":"KPY-201-1773","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/360140_pentairfilters.jpg?v=1788690505"},{"product_id":"debris-valve","title":"Pentair Kreepy Krauly Debris Valve","description":"\u003cp\u003eThe EU9 is the rubber debris valve used in Pentair Kreepy Krauly Legend and Legend II cleaner heads. It is the genuine part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe debris valve is a flexible rubber flap in the cleaner head. It opens to let debris through and closes behind it so what the cleaner has picked up stays picked up. When the rubber hardens, splits or tears, that one way behavior stops working and the cleaner starts putting dirt back where it found it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich heads it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists it across the Legend range: the 3 wheel and 4 wheel Legend heads, the Legend LL505G, and the Legend II LX2000 and LX5000G. Because it is inexpensive and buried inside the head, it is worth replacing whenever the head is open for other service.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626268471508,"sku":"LET-201-2492","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a44da1c5-fcf0-46e9-b50f-c483ed77279b.png?v=1788707507"},{"product_id":"leaf-trap-canister","title":"Pentair Kreepy Krauly Leaf Trap Canister","description":"\u003cp\u003eThe Kreepy Krauly R211084K is a leaf trap canister with a handle, designed for use with Kreepy Krauly pool cleaners. It is the factory accessory for that cleaner line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe canister goes into the hose run between the cleaner and the suction port. Leaves, twigs and acorns collect in it instead of travelling all the way to the pump strainer. When it fills, it is lifted out at the pool edge by the handle and emptied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is worth having\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a pool under trees, the pump basket fills faster than anyone wants to check it. Once it packs, flow drops, the cleaner slows and the pump can lose prime. A leaf trap intercepts most of that load somewhere far more convenient to empty, and keeps the suction steady for the cleaner in the process.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626381979860,"sku":"KPY-201-2741","price":113.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_04fd3c01-f03e-4db7-a67b-f500ab131055.png?v=1788709530"},{"product_id":"automatic-regulator-valve-white-cap","title":"Pentair Kreepy Krauly Automatic Regulator Valve and Cap Kit, White","description":"\u003cp\u003eThe Pentair K12004 is the white automatic regulator valve with its cap, sold as a kit, for the Kreepy Krauly suction side pool cleaner. It is the genuine part, molded in plastic to match the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA suction cleaner runs on the pump, and the amount of suction it gets decides whether it works. Too much and the cleaner sprints, climbs the wall and breaks the surface. Too little and it stalls in a corner. The automatic regulator valve holds the flow in the range the cleaner was built for without anyone adjusting a thing, so when it fails the cleaner starts behaving badly for no obvious reason.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich model\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source records for this part do not fully agree. The product description is written specifically for the Kreepy Krauly 2000 model, while the part is filed under both the Classic 2000 to current parts group and the 1993 and prior group. If yours is an older head, compare the valve you are taking out with the product photos before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626593988820,"sku":"KPY-201-1750","price":93.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e89324b7-71c0-45f5-8de4-a170317b5e84.png?v=1788712832"},{"product_id":"wall-fitting-complete","title":"Pentair Kreepy Krauly White Complete Wall Fitting","description":"\u003cp\u003eThis is the Pentair EW22 complete wall fitting in white, the quick disconnect fitting that a pressure side cleaner hose connects to at the pool wall. It is supplied as the whole assembly rather than as separate pieces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFour parts: the E23 quick disconnect adapter, the E21 O-ring for the wall fitting, the E25 pressure relief valve and the E24 screen for the wall fitting. Each is available separately, but when a fitting has been in a wall for years it is usually more than one piece that has aged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe EW22 is used on most Pentair pool cleaners. That includes the Letro Legend in both three wheel and four wheel form, the Legend Platinum LL105PM, the Legend LL505G and the Jet Vac JV105.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wall fitting is the pressure connection between the plumbing and the cleaner. A cracked adapter, a hardened O-ring or a blocked screen all show up the same way at the cleaner: weak drive, a limp sweep hose, or a hose that will not stay coupled. Renewing the fitting removes all of those causes at once.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626728927444,"sku":"LET-201-2493","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_778c90a5-24c7-444b-b849-f51e8746e0a0.png?v=1788714116"},{"product_id":"wheel-rubber-tire","title":"Pentair Kreepy Krauly Wheel Rubber Tire Replacement","description":"\u003cp\u003eThis is the rubber wheel tire for the Pentair Kreepy Krauly Legend and Legend II automatic pool cleaners, part number 360007. Pentair lists it as the tire used on cleaners built after 2008.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a worn tire does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Legend drives itself around the pool on its wheels, and the rubber tire is the only thing between the wheel and the pool surface. Once the tread wears flat the wheel slips instead of pulling, and the cleaner starts to wander, sit in one place, or give up on the walls. Owners often suspect the hose or the head when a bald tire is the real cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tire replaces on its own, so there is no need to buy a complete wheel. Tires wear at similar rates, so it is worth looking at the others while the cleaner is out of the water and replacing any that have gone smooth.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626974654676,"sku":"LET-201-1101","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fe6a282f-a562-4a9a-a6fd-d2404fb9049f.jpg?v=1788718636"},{"product_id":"starfish-seal-concrete-pools-only","title":"Pentair Kreepy Krauly Starfish Seal, Concrete Pools Only","description":"\u003cp\u003eThe K12895 is the starfish seal kit for the Kreepy Krauly Classic suction cleaner, in the version specified for concrete pools. It is the genuine part from the Pentair owned Kreepy Krauly line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe starfish seal is the face that rides against the pool surface. It is what holds the cleaner down and keeps the suction working where it should. Because it is in constant contact with plaster or concrete, it is a wearing part, and a worn one shows up as a cleaner that slows down, loses its pattern or leaves areas untouched.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the surface and the model\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the concrete pools only version. It is listed in the Kreepy Krauly Classic parts diagram covering 2000 to the present model, so confirm your cleaner falls in that range before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627196854484,"sku":"KPY-201-1736","price":113.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_929709c9-5bdf-4fb5-94cb-ecf9ebeede37.png?v=1788720004"},{"product_id":"rebel-v2-wheel-kit","title":"Pentair Rebel V2 Wheel Kit","description":"\u003cp\u003eThe Pentair 360480 wheel kit is the genuine replacement wheel set for the Rebel suction side inground pool cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy wheels wear\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wheels touch the pool surface for every hour the cleaner runs. As the tread wears down the cleaner loses grip, which shows up as slipping on the floor, stalling in one spot, or no longer climbing the walls the way it used to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA kit rather than a single wheel, under Pentair part number 360480. The same kit appears both as the Rebel wheel kit and the Rebel V2 wheel kit, so either name points at this part number.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627216122068,"sku":"KPY-201-1002","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c452e357-154d-4ce5-984a-2ae4aa89ec1a.png?v=1788720126"},{"product_id":"feedline-hose-kit-complete","title":"Pentair Kreepy Krauly Racer Feedline Hose Kit Complete","description":"\u003cp\u003eThe Pentair 360264 is the complete feedline hose kit for the Kreepy Krauly Racer pool cleaner. Rather than a single length, this is the full hose run supplied as one genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the feedline matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Racer is a pressure side cleaner, which means it does nothing without a clean, sealed path for pressurized water from the wall fitting to the unit. When the hose goes stiff with age, splits at a joint or collapses under pressure, the cleaner slows, wanders or parks itself in a corner. Owners often chase the pump or the booster when the hose is what has failed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComplete versus sections\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair also sells individual soft and hard feed line sections for the Racer. Those make sense when one length has been damaged. This kit is the right call when the hose is simply old, since replacing everything at once keeps the total run correct and avoids a second failure a month later.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627716423892,"sku":"KPY-201-6017","price":309.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f78d09bd-c596-4438-ad54-5e8c624e90d3.jpg?v=1788727054"},{"product_id":"feed-mast-w-o-ring-white","title":"Pentair Letro Legend LLU6 Feed Mast with O-Ring, White","description":"\u003cp\u003eThe Pentair LLU6 is the genuine Kreepy Krauly Letro Legend feed mast pipe, supplied in white with its o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the mast does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Legend is a pressure side cleaner. Water from the booster pump comes down the hose, enters the cleaner through the feed mast, and that pressure is what turns the wheels and works the sweep. Everything the cleaner does depends on getting that water inside without losing it on the way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it gets replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMasts sit in sunlight and take the constant tug of the hose. They crack, they split at the joint, and the o-ring hardens. What the owner sees is a cleaner that has gone slow, stopped climbing walls, or started parking in a corner, with water squirting out above the machine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed for the Legend 3 wheel, the Legend 4 wheel LL105, the Legend Platinum LL105PM and the Legend LL505G. Check the model on your cleaner before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627760267476,"sku":"LET-201-2083","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d07ef84b-9b1e-4786-8f8f-00d4af874662.jpg?v=1788727791"},{"product_id":"feedline-wall-connector-kit","title":"Pentair Kreepy Krauly Racer Feedline Wall Connector Kit","description":"\u003cp\u003eThe Pentair 360251 is the feedline wall connector kit for the Kreepy Krauly Racer and Racer LS pool cleaners. It is the genuine Pentair part, supplied as a kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Racer is driven by water pressure sent down the feedline from the booster pump. This kit is the connection at the wall, where that feed hose meets the wall fitting. Everything the cleaner does depends on that joint holding full pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wall connector is handled every time the cleaner comes out of the pool, and it lives under constant pressure in between. When it cracks, weeps or no longer seals, the cleaner loses drive and its sweep slows down, and the fault is often blamed on the pump. Replacing the connector kit is a short job at the wall with no need to take the cleaner apart.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627874431188,"sku":"KPY-201-6011","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_04ae000c-67d7-42f2-87e0-610bf656ef28.jpg?v=1788729480"},{"product_id":"rebel-warrior-drive-gear-kit","title":"Pentair Rebel\/Warrior Drive Gear Kit","description":"\u003cp\u003eThe Pentair 360292 is the drive gear kit for the Rebel and the Kreepy Krauly Warrior pool cleaners. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the drive gears do\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth cleaners turn suction into motion through a gear train. Water pulls the internal mechanism, the mechanism drives the gears, and the gears step the cleaner across the floor. Those gears carry the whole load of that motion, so they are the part that wears out first on a cleaner that has done a few seasons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the failure looks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cleaner that has lost its drive gears often looks alive. The hose still pulses, the mechanism still cycles, but the cleaner barely moves or parks itself in one corner of the pool. That combination, plenty of suction and no travel, points at the gears rather than the pump or the hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you have it open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair sells the scrubber gear kit and the cam and cam gear kits separately for these same cleaners. Once the cleaner is apart, look at all of them and replace what is worn in one go.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627885998292,"sku":"KPY-201-0292","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_28975778-bbbe-41df-b017-c5c753b8ad61.png?v=1788729607"},{"product_id":"vac-tube-posts-snap-fit-2-pack","title":"Pentair Kreepy Krauly Vac Tube Posts, Snap Fit (2 Pack)","description":"\u003cp\u003eEU147 is the snap fit vac tube post for the Letro and Pentair Legend series cleaners, supplied as a 2 pack in white plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the post does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe posts locate the vacuum tube on the cleaner body. They take a knock every time the cleaner works its way into a corner or against a step, and a broken post lets the tube move where it should be held.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment and fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe part is listed across the Legend range: the 3 wheel and 4 wheel LL105 heads, the LL505G, the Legend II LX2000 and LX5000G, and the Legend Platinum LL105PM. They snap into place, so no hardware or tools are needed, and because they come two to a pack it is worth doing both while the cleaner is out of the water.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627908870356,"sku":"LET-201-2494","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3df50ae7-54be-45bf-8a18-96154a54e0aa.png?v=1788729749"},{"product_id":"letro-legend-wheel","title":"Pentair Letro Legend Wheel","description":"\u003cp\u003eThe Pentair 360006 is the genuine replacement wheel for Letro Legend pool cleaners, model LL505G. The wheel measures 6-1\/2 inches outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a wheel goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Legend drives its pattern on its wheels, so a wheel that has cracked, gone out of round or lost its grip changes how the cleaner covers the pool. It hangs up in corners, wanders off its line, or stalls where it used to climb. Replacing the wheel puts the drive geometry back where it started.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is and is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the wheel itself. The rubber tire and the plastic wheel screws are listed separately, so check both while the wheel is off the cleaner. The same part is also carried under the Pentair Kreepy Legend II LX5000G head parts listing.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627951173844,"sku":"LET-201-1100","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9af8c5d8-7b39-47fb-ad80-353626e6b465.jpg?v=1788730734"},{"product_id":"rebel-cleaner-wheel-kit","title":"Pentair Rebel Cleaner Wheel Kit","description":"\u003cp\u003eThe Pentair 360286 is the wheel kit for the Rebel pool cleaner. It is a single wheel replacement, so check how many wheels you need before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy wheels decide the clean\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Rebel covers the pool by driving a pattern, and the pattern only happens if the wheels grip. Hours of running against plaster, pebble and tile grout wears the tread down, and the first symptom is not a dead cleaner but a lazy one: it lingers in the deep end, slips on the slope, or misses the same stretch of floor every cycle. Owners often chase suction and hoses when the answer is at the wheels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the Pentair kit rather than a generic wheel, which matters on a cleaner whose whole behavior depends on consistent traction and rolling diameter.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628739932372,"sku":"KPY-201-0286","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_32de57f8-e93b-4c0c-a744-9f66c6d4656e.jpg?v=1788749486"},{"product_id":"prowler-910-track","title":"Pentair Prowler 910 Replacement Track","description":"\u003cp\u003eThe Pentair 360342 is the genuine replacement track for the Prowler 910 robotic pool cleaner. It is the OEM part, cut to match the drive system on that model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTraction is the whole job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA robotic cleaner covers the pool by following a pattern, and it can only follow that pattern if both tracks bite evenly. Once a track glazes over, stretches or loses its tread, the cleaner starts slipping. On the floor that shows up as missed areas; on the wall it shows up as a cleaner that starts the climb and slides back down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck both sides\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTracks rarely wear at the same rate. If the cleaner has begun pulling to one side, compare the two before ordering, because an unmatched pair keeps the steering off even after one side is renewed.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628745699540,"sku":"KPY-201-0212","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c4d495ed-91a7-4382-9e8c-e69b5676ae0d.jpg?v=1788749611"},{"product_id":"wheel-bearings-only-2-pack","title":"Pentair Kreepy Krauly Wheel Bearings, 2 Pack","description":"\u003cp\u003eEC60 is the wheel bearing used on the Kreepy Krauly and Letro Legend pool cleaners, sold two to a pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cleaner wheel that no longer spins freely stops tracking. The unit drags a corner, climbs badly and starts leaving the same patch of floor untouched every cycle. Take the wheel off and turn the bearing by hand: if it grinds or catches, that is the fault, and it is one of the cheapest parts on the machine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the pack\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo ball bearings, which is what one wheel takes. The wheels themselves and the plastic wheel screws are ordered separately. The part is listed across the Letro Legend parts diagrams, so check your own model diagram against the bearing before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628772405460,"sku":"LET-201-2471","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a4105402-809c-4c2c-8964-76899d0d3530.png?v=1788750434"},{"product_id":"wheel-screw-plastic-white-5-pack","title":"Pentair Kreepy Krauly Legend Wheel Screw, Plastic White, 5 Pack","description":"\u003cp\u003ePentair EC55 is the white plastic wheel screw for the Letro Legend family of pool cleaners, sold as a pack of five.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wheel screw retains the wheel on the cleaner. It is the piece that comes out first during a wheel, tire or bearing change, and it is the piece most likely to be dropped in the pool or lost on the deck while the rest of the job is done.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is used across the Letro Legend 3 wheel and 4 wheel LL105, the Legend Platinum LL105PM, the Legend II LX2000 and LX5000G, and the Legend LL505G.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuying a pack\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFive in a pack covers a full set on most of these cleaners with a spare left over, which is the practical reason to keep one in the equipment room rather than ordering a single screw when one goes missing.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628832698580,"sku":"LET-201-2470","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ed7ab22f-1bc6-4173-a524-14a239fe2746.png?v=1788753648"},{"product_id":"swivel","title":"Pentair Kreepy Krauly Legend Swivel Replacement","description":"\u003cp\u003eThe Pentair ED05 is the feed hose swivel used on the Letro built Kreepy Krauly Legend family of pressure side cleaners. It is the genuine OEM part, in molded plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a hose needs a swivel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pressure cleaner spends its run turning, reversing and working its way around the pool, and every one of those turns puts a twist into the feed hose. The swivels let each hose section rotate on its own so that twist never accumulates. When one seizes, the hose coils up, goes taut, and starts hauling the cleaner back before it can finish its pattern. Owners usually read that as a cleaner that has lost power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ED05 covers the Legend, Legend Platinum, the 3 wheel and 4 wheel Legend, the LL505G, the Jet-Vac JV105 and Pool Sweeps I and II. If more than one swivel on the hose feels stiff, replace them together, because a single free swivel in a stiff hose does not solve the twist.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628940046548,"sku":"LET-201-2478","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_db12ae13-b55f-4fbb-9741-f61187ebcebe.png?v=1788758241"},{"product_id":"small-wheel-kit-new-style","title":"Pentair Kreepy Krauly Racer Small Wheel Kit, New Style","description":"\u003cp\u003eThe Pentair 360236 is the small wheel kit for the Kreepy Krauly Racer pool cleaner. It is the genuine Pentair part, supplied in the current design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOld style and new style\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair changed the design of this wheel kit but kept the same part number, so the number alone no longer tells you which version you are looking at. Stock of the older style is limited, and is expected to get harder to source over time. Compare the images against the wheels on your cleaner, and if it is not clear, check before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy wheels matter on a Racer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Racer drives a set route around the pool, and it relies on its wheels for grip and steering. When the small wheels wear, the cleaner drifts off its pattern and leaves areas untouched, which owners often mistake for a pressure or hose problem.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629265006804,"sku":"KPY-201-6002","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_94015ecf-247d-4257-beb9-935895f7976b.jpg?v=1788761764"},{"product_id":"scrubber-gear-kit","title":"Pentair Kreepy Krauly Racer Scrubber Gear Kit","description":"\u003cp\u003eThe Pentair 360238 is the scrubber gear kit for the Kreepy Krauly Racer pool cleaner. It is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Racer cleans by scrubbing as it drives, and the scrubber gears are what transfer drive to the brush. Gear teeth wear and eventually strip, and when that happens the cleaner keeps tracking around the pool but stops scrubbing. Owners often think the cleaner is fine because it still moves, while the pool slowly gets dirtier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe part is supplied as a kit rather than a single gear, so the wearing pieces go in together.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629274411220,"sku":"KPY-201-1205","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_99d9616f-2cf2-47c8-b5ff-ea99fbbdabaf.jpg?v=1788761812"},{"product_id":"letro-legend-hub-cap","title":"Pentair Kreepy Krauly Letro Legend Hub Cap","description":"\u003cp\u003eThe Pentair 360005 is the hub cap for the Kreepy Krauly Letro Legend and Legend II pool cleaners. It is a new OEM part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source lists it for models LL505G and LX5000GG, and notes that it may also fit other Pentair cleaners. Compare the cap you have against the one pictured before ordering if your model is not one of those two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA part that goes missing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHub caps sit on the outside of the wheel where they take every knock the cleaner gives a wall or a step. They work loose, come off in the pool and end up in the skimmer or under a step, and most owners only notice once the hub is bare. Replacing the cap keeps the hub covered and the wheel looking and running as it should.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629281915092,"sku":"LET-201-9000","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8c30d20a-a0f2-4fb8-9143-bb9e7f8cbd16.jpg?v=1788761890"},{"product_id":"hose-mender-nuts-plastic-white-2-pack","title":"Kreepy Krauly Hose Mender Nuts, Plastic, White (2 Pack)","description":"\u003cp\u003eKreepy Krauly ED15 is the white plastic hose mender nut, supplied two to a pack. It is the fastener that clamps a mender into a length of cleaner hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCleaner hose does not usually fail along its whole length. It splits at one point, and the standard repair is to cut out the bad section and join the two good ends with a mender. Each end of that mender is held by one of these nuts, which is why the pack contains two: enough for one repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe part is listed across the Pentair Legend three and four wheel models, the Legend Platinum, the Legend LL505G and the Jet Vac. The nuts are molded plastic rather than metal, so they will not corrode in chlorinated water or leave a rust mark on the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change them\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNuts crack with age and sun, and they get over tightened during service or lost entirely when a hose is taken apart. A joint that will not pull up tight leaks, and a leaking hose joint bleeds off the flow the cleaner depends on, so it is worth keeping a pack in the spares box.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629298331860,"sku":"LET-201-2480","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_65759540-ad57-45d9-8938-f39279f7a5dc.png?v=1788762084"},{"product_id":"axle-large-wheels","title":"Pentair Kreepy Krauly Axle, Large Wheels","description":"\u003cp\u003eThe EC65 is the genuine Kreepy Krauly axle for the large wheels on the Pentair Legend cleaners. It is molded in plastic, as the original is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe part is listed against a wide slice of the Legend family: the three wheel and four wheel versions of the Legend, the Legend II LX2000 and LX5000G, and the Kreepy Krauly Legend LL505G. It serves the large wheels, so identify which wheel on your cleaner has failed before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Legend cleans by driving a set pattern across the pool. When an axle snaps or seizes, the wheel stops turning and the cleaner drags instead of driving, missing whole sections of floor. While the wheel is off, look at the bearings and the wheel screw as well: they sit in the same assembly and wear at much the same rate, so replacing them together avoids a second teardown.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629388574932,"sku":"LET-201-2473","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_29460812-9d79-438f-82ec-4404e4de6ab4.png?v=1788765903"},{"product_id":"plate-vac-plus-ii-7-1-4","title":"Pentair Kreepy Krauly Vac Plus II Plate, 7-1\/4\"","description":"\u003cp\u003eK12068 is the Kreepy Krauly plate for the Vac Plus II, 7-1\/4 inches across and molded in plastic. It is carried as a Pentair brand part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate is listed under the Kreepy Krauly 1994 and prior original version head. Kreepy Krauly heads changed over the years and the parts are not interchangeable across versions, so it is worth confirming which head is on the cleaner before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it wears\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate spends its life dragged across the pool surface, and it thins with use. A worn plate changes how the head sits and how it seals, which shows up as a cleaner that wanders or loses grip. The locking bar is a separate part and is worth checking at the same time.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629512405204,"sku":"KPY-201-2467","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_caf29ebe-1f09-4aac-92fe-467390e21d2f.png?v=1788766023"},{"product_id":"feedline-swivel-kit","title":"Pentair Kreepy Krauly Racer Feedline Swivel Kit","description":"\u003cp\u003eThe Pentair 360249 is the feedline swivel kit for the Kreepy Krauly Racer pool cleaner. It is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the swivel does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pressure side cleaner is fed by a hose from the wall, and it spends its whole working life turning. The swivel is the joint that lets it turn without dragging the feed line around with it. When that joint seizes, every turn the cleaner makes twists the hose instead, and the wound up line pulls the cleaner off its pattern, keeps it in one corner, or stops it moving at all.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLook at the hose after a cycle. If it comes out coiled and stiff, or the cleaner has spent the run near the wall it starts from, the swivel is the first thing to check. It is supplied as a kit, so the parts needed for the job come together.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629534294228,"sku":"KPY-201-6009","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f69b9bc1-118c-4439-9756-1461bb279cc5.jpg?v=1788766162"},{"product_id":"rebel-warrior-left-drive-kit","title":"Pentair Left Drive Kit for Rebel and Kreepy Krauly Warrior Pool Cleaner","description":"\u003cp\u003eThe Pentair 360289 is the left drive kit for the Rebel and the Kreepy Krauly Warrior suction side pool cleaners. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the drive does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth cleaners run on pool suction and use their drive to walk a pattern across the floor and walls. When a drive kit wears out, the cleaner still moves water but stops covering ground: it crawls, circles the same spot, or gives up on the walls. Replacing the worn side puts the pattern back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLeft side only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the left drive kit. The right side is a separate part number, so turn the cleaner over and compare the two sides before ordering. If both are equally worn, it is normal to do the pair at once.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633370018004,"sku":"KPY-201-0289","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6792ede5-711d-41e2-a10b-3e51448144ad.png?v=1788798499"},{"product_id":"regulator-assembly-vaccuum-great-white","title":"Sta-Rite Vacuum Regulator for Kreepy Krauly LilShark Pool Cleaner","description":"\u003cp\u003eSta-Rite GW9016 is the vacuum regulator assembly for the Kreepy Krauly cleaner line. It sits in the suction path and limits how hard the pump can pull on the cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the regulator does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA suction cleaner needs a particular amount of flow. Too little and it crawls or stalls, too much and it climbs the walls, sticks to the floor and chews through its own parts. The vacuum regulator bleeds off the excess so the cleaner sees the flow it was built around, whatever the pump happens to be doing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich cleaner it serves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part is listed for the Kreepy Krauly LilShark and is also catalogued with Great White GW9000 and GW9500 cleaner parts. Compare the regulator on your cleaner against the photograph before ordering if you are not sure which family yours belongs to.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48633371197652,"sku":"STA-201-1016","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_aaa274c1-c4c7-4a23-88b2-c2a53e50bce1.png?v=1788798629"},{"product_id":"racer-ls-debris-bag-with-collar-filter-kit","title":"Pentair Racer LS Debris Bag with Collar Filter Kit","description":"\u003cp\u003eThe Pentair 360319 is the debris bag with collar filter kit for the Kreepy Krauly Racer LS pressure side pool cleaner. It is the genuine Pentair part, supplied as a kit so the bag and the collar filter it seats against are replaced together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the bag matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pressure side cleaner has no filter of its own beyond this bag. Everything the unit sweeps up is carried into it and held there until you empty it. Once the fabric tears or the seams open, the cleaner keeps driving its pattern and quietly returns the debris to the pool floor behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe collar is half the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFitting a new bag onto a tired collar leaves a bypass path for fine material. Supplying the two as a kit is deliberate: replacing both at once restores the seal as well as the bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModel check\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is for the Racer LS. The standard Kreepy Krauly Racer uses a different debris bag, so confirm which cleaner you have before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633375981780,"sku":"KPY-201-6077","price":102.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f378f762-18bd-45e8-878f-80fac94e0e71.jpg?v=1788798876"},{"product_id":"pentair-360392-racer-racer-ls-inline-filter-assembly","title":"Pentair Racer\/Racer LS Inline Filter Assembly","description":"\u003cp\u003eThe Pentair 360392 is the inline filter assembly for the Racer and Racer LS pool cleaners. It is the genuine Pentair part, supplied complete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the inline filter matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inline filter is the barrier between the pool and the working parts of the cleaner. Everything the cleaner picks up has to pass it, which is exactly why it clogs. A filter that is packed with debris strangles the flow the cleaner depends on, and the first thing an owner notices is a Racer that crawls, stalls in a corner, or stops climbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf cleaning the filter no longer restores normal speed, or the screen is split or distorted, replace the assembly. It is a wear part, and a fresh one restores both the flow and the protection.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633642877140,"sku":"KPY-201-0218","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ce65125e-4304-4843-a059-33b20e78513c.jpg?v=1788808137"},{"product_id":"clear-leaf-trap-vacuum-canister","title":"Pentair Clear Leaf Trap Vacuum Canister","description":"\u003cp\u003eThe Pentair R211084 is a clear leaf trap vacuum canister with a snap open lid and a mesh bag inside. It comes with one 3 foot by 1.5 inch vacuum hose to run into the skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVacuuming a pool after a windy week is a losing battle without a trap. Leaves go straight down the hose and pack the pump basket, flow drops away, and the job turns into a cycle of shutting the pump off, clearing the basket and starting again. The leaf trap sits in the line ahead of all that and catches the bulk in a bag you can snap open and tip out at the side of the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe short hose supplied runs from the canister to the skimmer, with the vacuum hose on the other side. The clear body lets you watch the bag fill so you can empty it before flow starts to suffer. Keeping the heavy debris out here also means the pump basket and the impeller behind it see far less of it.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633783681236,"sku":"RAI-40-2284","price":134.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4d9f6dba-79f5-403f-a704-054e4649fba2.png?v=1788816281"},{"product_id":"swivel-cone-bearing-kk2000","title":"Pentair Kreepy Krauly Swivel Cone and Bearing KK2000","description":"\u003cp\u003eKreepy Krauly K12156C is the replacement swivel cone and bearing for the KK2000 pool cleaner by Pentair. It is supplied as the cone and the bearing together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe swivel is the joint where the vacuum hose meets the cleaner. It lets the hose rotate freely as the cleaner tracks around the pool, which is the only thing keeping the hose from winding into coils. Once the bearing binds, the hose starts twisting and the cleaner loses reach, so it works the same stretch of floor over and over and never gets to the far end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChecking it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith the cleaner out of the water, turn the swivel by hand. It should spin smoothly with no grinding and no catching. Roughness or a seized bearing means the assembly is done.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eListed by Pentair for the Kreepy Krauly KK2000 in the Classic 2000 and later range.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633786794196,"sku":"KPY-201-1748","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3c4ac7f9-f41b-41d5-8009-673b732898cd.png?v=1788816535"},{"product_id":"pleated-seal-vinyl-fiberglass-tile","title":"Pentair Kreepy Krauly Pleated Seal, Vinyl\/Fiberglass\/Tile","description":"\u003cp\u003eThe Pentair K12896 is the pleated rubber seal for Kreepy Krauly cleaners built from 2000 to current, in the version made for vinyl, fiberglass and tile pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the seal to the surface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKreepy Krauly seals are cut differently depending on what the cleaner runs across. This one is the vinyl, fiberglass and tile version. Fitting the wrong seal changes how the cleaner sits and how it tracks, so the surface matters as much as the model year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck it against the old one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal measures 18-3\/16 inches across the outside and 4-5\/16 inches across the inside opening. It is 3\/8 inch thick at the outer edge and just under 1\/4 inch through the inner section. Those figures are the quickest way to confirm you have the right part before the cleaner comes apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it wears out\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRubber that spends its life submerged and dragged over a pool floor hardens, tears and loses its shape. A seal in that condition lets the cleaner skate instead of gripping, and replacing it usually restores normal travel.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633918980308,"sku":"KPY-201-1763","price":120.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3f9524f9-d550-486f-af7a-f3c019ab30dd.png?v=1788817211"},{"product_id":"white-chassis-with-pad-for-sandshark-pool-cleaner","title":"Pentair White Chassis with Pad for SandShark Pool Cleaner","description":"\u003cp\u003eThe Pentair 41201-0242W is the white chassis with pad for the Kreepy Krauly SandShark automatic pool cleaner. It is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the chassis does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe chassis is the structural body of the cleaner. Every other component hangs off it, so once it cracks or distorts, the parts bolted to it stop sitting where they should and the cleaner starts tracking badly or losing suction even though nothing else has failed. That is why the chassis is sold as a service part rather than treated as part of the machine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the chassis together with its pad, in white. Pentair uses separate part numbers for the other colors, so match the number 41201-0242W against your own cleaner before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633927565524,"sku":"STA-201-2510","price":141.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_365963cc-f4a5-42e0-aa76-8300410de138.jpg?v=1788817365"},{"product_id":"pentair-360123-spring-filter","title":"Pentair Kreepy Krauly Prowler 830\/820 Spring Filter","description":"\u003cp\u003ePentair 360123 is the spring filter for the Kreepy Krauly Prowler 820 and Prowler 830 robotic pool cleaners. It is the genuine Pentair part, ordered by number so there is no matching a spring by eye.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy springs get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spring that is compressed and released through every cleaning cycle eventually takes a set and stops returning to its original length. Pool water accelerates that, pitting and rusting the metal until it is weak. Neither failure is dramatic, which is what makes it easy to overlook when a cleaner starts behaving oddly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the spring alone, not the filter cartridge or bag. The natural time to change it is when the filter is already out of the cleaner for a wash, because the part costs very little next to the trouble of taking the machine apart twice.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633931595988,"sku":"KPY-201-0724","price":107.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/pentair-360123-kreepy-krauly-legend-ll-filter-spring-mtc56.jpg?v=1788817498"},{"product_id":"45-hose-connector","title":"Pentair Kreepy Krauly 45 Degree Hose Connector","description":"\u003cp\u003eThe Pentair Kreepy Krauly K12078 is a 45 degree hose connector, molded in plastic and supplied as a single fitting. It is the genuine part, catalogued with Kreepy Krauly cleaner hose accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy an angled connector\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHose connectors take a beating that nobody notices until the cleaner slows down. Sun makes the plastic brittle, and every time the hose is coiled, dragged over coping or pulled out of the skimmer, the joints take the strain. A cracked connector leaks suction into the water instead of into the cleaner, and the symptom looks like a weak pump rather than a dollar part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 45 degree version. Straight couplings and other angles are separate part numbers, so match the fitting you are replacing before you buy.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633977438420,"sku":"KPY-201-2465","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5ff11b98-0210-4161-891b-a00a40a837cc.png?v=1788823148"},{"product_id":"turbine-drive-shaft-complete","title":"Pentair Kreepy Krauly Turbine Drive Shaft, Complete","description":"\u003cp\u003eThe EC86 is the complete turbine drive shaft for Pentair Kreepy Krauly Legend pool cleaners. It is built in metal and supplied as the whole assembly rather than as a bare shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Legend cleaners are driven by water. Flow spins a turbine, the turbine turns this shaft, and the shaft passes that motion into the gearing that moves the wheels. Everything the cleaner does depends on that one line of drive staying tight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a worn shaft\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cleaner that is clearly getting water and whose turbine is spinning, but that crawls, stalls in corners or stops moving altogether, has usually lost drive somewhere between the turbine and the wheels. The drive shaft and the turbine bearings wear together, so check both while the cleaner is open rather than fitting one and closing it up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eListed for the Legend 3 wheel and 4 wheel versions, the Legend II LX2000 and LX5000G, the Legend LL505G and the Legend Platinum. Compare the part you are removing before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633984286932,"sku":"LET-201-2477","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c40f8ed4-6c43-485f-955a-acd1d2753222.jpg?v=1788823394"},{"product_id":"turbine-bearings-2-pack","title":"Pentair Kreepy Krauly Turbine Bearings (2 Pack)","description":"\u003cp\u003eThese are the turbine bearings for the Kreepy Krauly Legend family of pressure side pool cleaners, Pentair part EC80. They come two to a pack, which is what one turbine takes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat they carry\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Legend cleaner is driven by water. Pressure from the booster spins a turbine, and the turbine turns the wheels through the drive train. The bearings are what let that turbine spin freely under load, and they are running for every hour the cleaner is in the pool. Worn bearings make the turbine noisy, add drag, and eventually the cleaner slows down, stops climbing, or stalls in one corner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment and fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThey are listed for the Legend 4 wheel and 3 wheel cleaners, the Legend LL505, the Legend Platinum, the Legend Truck and the Legend II. Change both at once. A single new bearing paired with a worn one lets the shaft run off true, and the new one goes the same way.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48633991626964,"sku":"LET-201-2476","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d7c2d846-82dd-47d8-98e5-255f029cffc0.jpg?v=1788823460"},{"product_id":"screw-cover-to-frame-2-pack","title":"Pentair Kreepy Krauly Screw, Cover to Frame (2 Pack)","description":"\u003cp\u003eThe EU80 is the top cover to frame hex screw for Kreepy Krauly Legend series pool cleaners, sold as a two pack. It is a small metal fastener with a job worth taking seriously.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe screw holds the top cover down onto the frame of the cleaner head. When one is missing or stripped, the cover lifts and shifts as the cleaner works, which puts load on the remaining fasteners and on the cover itself. Replacing the pair together gives you even clamping rather than one fresh screw fighting one tired one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed across a wide slice of the Legend family: the Kreepy Krauly Legend LL505G, the Pentair Legend three wheel and four wheel heads, the Legend II LX2000, the Legend II LX5000G and the Legend Platinum.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth keeping spares\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFasteners this size disappear during a head rebuild, and a cleaner that is otherwise ready to go back in the water can sit on the deck waiting for one screw. Keeping a spare pair on the shelf avoids that.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48634020462804,"sku":"LET-201-9003","price":10.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cd33362c-bdca-4446-998c-13b540019c01.png?v=1788824806"},{"product_id":"soft-feed-line-hose-kit-10","title":"Pentair Kreepy Krauly Racer Soft Feed Line Hose Kit 10'","description":"\u003cp\u003eThe Pentair 360265 is the soft feed line hose kit for the Kreepy Krauly Racer, supplied in a 10 foot length. It is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the feed line does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Racer is a pressure side cleaner, which means it does nothing without water arriving under pressure. The feed line is the hose that carries that water from the wall fitting to the cleaner. A section that has split, kinked permanently or gone soft enough to collapse under pressure bleeds off the flow the cleaner needs, and the usual symptom is a Racer that crawls, stalls or stops climbing walls.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSoft or hard\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair builds the Racer feed line from both soft and hard hose sections and sells both in 10 foot kits. This listing is the soft hose. Look at the section you are replacing and match it, since swapping the type changes how the line lies in the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMeasure the whole run\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe feed line is made up of sections rather than one continuous hose, so check the length of your complete run against your pool before ordering. Pentair also lists a complete feedline hose kit if the whole line is due.\u003c\/p\u003e","brand":"Kreepy Krauly (Pentair)","offers":[{"title":"Default Title","offer_id":48634020528340,"sku":"KPY-201-6018","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b530a36b-fc7e-434d-92e7-0fc4ca57144f.jpg?v=1788824818"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/kreepy-krauly.oembed?page=3","provider":"Active Pool Supply","version":"1.0","type":"link"}