{"title":"Maintenance Equipment","description":"\u003cp\u003eShop maintenance equipment at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"sand-vac","title":"Pentair Sand Vac","description":"\u003cp\u003eThe Pentair 542090 Sand Vac is a tool for removing sand from a pool sand filter. Changing filter media or replacing a cracked lateral means emptying the tank first, and that is slow, wet work with a cup. The Sand Vac is built for that job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFilter sand wears smooth and channels over time and eventually has to be replaced. Laterals at the bottom of the tank can crack and let sand into the pool, and reaching them means clearing every bit of sand above. Either job goes faster with a tool made to pull sand out.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624871768276,"sku":"PAC-60-5144","price":186.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bfd0b972-d316-4480-a4c9-4330d4dfd6e6.jpg?v=1788647703"},{"product_id":"water-valve-4-port-module-3-1","title":"Paramount Water Valve 4 Port Module 3+1","description":"\u003cp\u003eThis is the Paramount 4 port water valve module in the 3+1 configuration, part 004-302-4406-00. It is the genuine Paramount part for the water valve at the heart of a Paramount in-floor cleaning system, the component that steps flow from one zone of floor heads to the next.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering the right module\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eParamount builds 4 port modules in more than one configuration, so match both the port count and the 3+1 designation to the module you are replacing. The part number is printed as 004-302-4406-00 and sometimes as 004302440600. This is the module only; the valve housing is not included.\u003c\/p\u003e\u003cp\u003eThe module ships by parcel.\u003c\/p\u003e","brand":"Paramount","offers":[{"title":"Default Title","offer_id":48624927441108,"sku":"PMT-201-736","price":335.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_aa2e9e43-ca33-4632-adcc-4d9ebefbf37d.png?v=1788654754"},{"product_id":"lid-assembly-6-port-low-profile-valve-clear","title":"Pentair In-Floor Low Profile Valve Lid Assembly with O-Ring","description":"\u003cp\u003eThe Pentair 230045 is the clear lid assembly for the 6 port low profile in-floor cleaning valve, originally an A\u0026amp;A Manufacturing product and now sold under the Pentair name. It comes with its o-ring, so the top of the valve seals up again with one part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid closes the top of the low profile actuator valve, the unit that steps water from zone to zone in an in-floor cleaning system. Because it is clear, you can see the valve indexing through its ports without opening it, which makes it easier to confirm the system is cycling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis lid is for the 6 port low profile valve. Confirm your valve is the low profile style, as the standard height A\u0026amp;A valves use a different lid. The valve body stays in place; only the lid and o-ring are replaced.\u003c\/p\u003e","brand":"A\u0026A Manufacturing","offers":[{"title":"Default Title","offer_id":48624928555220,"sku":"ANA-201-712","price":127.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_085481f2-449b-453a-a71e-4dc2b5e6c54e.jpg?v=1788654884"},{"product_id":"stain-eraser-tile-and-plaster-cleaner","title":"The PoolMan Stain Eraser Tile and Plaster Cleaner","description":"\u003cp\u003eThe PoolMan Stain Eraser is a stain removal block that attaches to a standard pool pole. You rub it over the stained area of tile or plaster and the stain lifts, without draining the pool or getting in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it removes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost of the stains a pool picks up: calcium scale on tile, rust spots, algae stains, metal stains and paint marks. It is a targeted tool for the spots a brush and chemistry leave behind.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSafe on the finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe block is made from a proven patented formula that takes the stain off without scratching, gouging or damaging the surface, and it is safe on a plaster spa as well as pool plaster and tile.\u003c\/p\u003e","brand":"11036","offers":[{"title":"Default Title","offer_id":48625023058132,"sku":"TSE-60-5000","price":31.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f5512257-e929-4be8-a98c-bf3dff430439.jpg?v=1788662573"},{"product_id":"rainbow-leaf-master","title":"Pentair Rainbow Leaf Master","description":"\u003cp\u003eThe Pentair Rainbow Leaf Master, part R211046, is the leaf vacuum most pool cleaners keep in the truck. It is also sold under the names leaf eater and leaf bagger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConnect it to a standard garden hose and a pool pole. The hose water is sprayed up into the bag, which creates a strong venturi under the head, and that lifts leaves and heavy debris off the pool floor and into the bag. No pump, booster or vacuum line is involved, so it works even when the filter is off. The filter bag slips on and off quickly when it fills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne Leafmaster body, one filter bag, three wheel assemblies, a pole adapter and the pole adapter pin. An extra fine, large capacity bag for sand and silt is available separately for finer debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it earns its keep\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpring opening and fall leaf drop, when a skimmer and an automatic cleaner cannot keep up. It is a manual tool, so you steer it, and it clears a heavy floor in a fraction of the time a net takes.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625583784148,"sku":"RAI-40-2128","price":58.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ecf56cbc-987a-4ad9-8e1b-790d23efd79f.jpg?v=1788688849"},{"product_id":"pentair-236241-style-ii-low-flow-step-internal-cleaning-head-for-magnasweep-cleaning-system-white","title":"Pentair MagnaSweep II Low Flow Internal Step Head, White","description":"\u003cp\u003eThe Pentair 236241 is the Style II low flow internal cleaning head for steps, finished in white, used in the MagnaSweep in floor cleaning system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn floor systems use different heads in different parts of the pool. This one is the low flow internal head Pentair specifies for the step area, where the flow available is lower than it is on the main floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeads wear from grit and years of cycling. A head that no longer rises, no longer drops back flush, or has stopped rotating leaves a patch of the pool uncleaned while the rest of the system keeps working. Replacing the individual head is the fix; the rest of the system is untouched.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the genuine Pentair part, number 236241, in white. Match the style and flow rating to what came out, since the standard flow heads are a different part.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625727733972,"sku":"ANA-201-831","price":52.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4badbd78-4816-45bc-bb0d-b609e6d33ae0.jpg?v=1788690181"},{"product_id":"valve-clamp","title":"Paramount In-Floor Valve Module Clamp, Hydra Valve","description":"\u003cp\u003eThe Paramount 005-302-3570-00 is the replacement clamp for the in-floor water valve module used with the Hydra Valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn-floor cleaning systems route water through a valve that cycles pressure between groups of floor heads. The valve module is the serviceable core of that assembly, and this clamp is the piece that holds it together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clamp on its own, as a genuine Paramount part. If the module itself has failed, that is a separate part.\u003c\/p\u003e","brand":"Paramount","offers":[{"title":"Default Title","offer_id":48625747755220,"sku":"PMT-201-603","price":61.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_53d015f2-12d2-46e5-ba14-ddc4ae6257f7.jpg?v=1788691448"},{"product_id":"hose-filter-purifies-up-to-40-000-gallons-of-water","title":"ecoOne Hose Filter, Purifies up to 40,000 Gallons of Water","description":"\u003cp\u003eThe ecoOne ECO-8014 is a hose filter that treats water on its way into a pool or spa. It screws onto any garden hose and uses a proprietary dual chamber design to strip out the contaminants that cause most start up problems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it takes out\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe filter removes 90% of chlorine, 98% of metals, and the minerals that cause scale, from either city or well water, hard or soft. Metals are the reason this matters. Iron and copper coming in with the fill water are what become stains on plaster and rings at the waterline, and it is far easier to keep them out than to remove them from a full pool with chemistry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCapacity and other uses\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne filter purifies up to 40,000 gallons. Because it works on a standard hose connection it is not limited to the pool: the same filter serves fish ponds, fountains, aquariums, bird baths, pet water dishes, lawn watering, washing pets, boats and motorcycles, organic gardening, and filling campers and RVs.\u003c\/p\u003e","brand":"ecoOne","offers":[{"title":"Default Title","offer_id":48625786912980,"sku":"PSI-40-2000","price":57.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1260f869-eb62-4b21-b5b0-9109a9a3e7c0.jpg?v=1788692462"},{"product_id":"acid-wash-underwater-set","title":"Purity Pool Acid Wash Underwater Set","description":"\u003cp\u003eThe Purity Pool UAW is an underwater acid wash set. It comes with a 4 in head, a 14 in head and a 25 ft quick siphon tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the two heads are for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 14 in head covers open wall and floor surfaces quickly. The 4 in head handles steps, corners, benches and anywhere the larger head cannot lie flat against the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorking underwater\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe point of the set is that the pool stays full. The 25 ft quick siphon tube pulls the spent solution away from the work area as you go, which is why it comes as part of the kit rather than as a separate purchase.\u003c\/p\u003e","brand":"Purity Pool","offers":[{"title":"Default Title","offer_id":48625811488980,"sku":"PTY-40-2078","price":127.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_28826d78-379d-4ab8-9e0d-5fab1d2489e6.jpg?v=1788700423"},{"product_id":"pv-3-head-removal-tool","title":"Paramount PV-3 Head Removal Tool","description":"\u003cp\u003eThis is the Paramount head removal tool for PV3 nozzles, part 004-627-5452-00, with a plastic handle. It also removes a Pool Valet Professional nozzle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn floor cleaning nozzles sit down in their floor fittings and are not designed to be pulled out by hand. Servicing one means lifting it to clear debris, check the bearing action or swap it for a new head, and the tool is what lets you grip and turn the nozzle without chewing up the head or the fitting around it.\u003c\/p\u003e\u003cp\u003eOne tool covers every PV3 head in the pool, so it is a buy once item for anyone maintaining a Paramount in floor system. The PCC2000 step nozzle uses a different Paramount tool.\u003c\/p\u003e","brand":"Paramount","offers":[{"title":"Default Title","offer_id":48625851793620,"sku":"PMT-201-805","price":42.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_52afd378-c978-4c90-a27b-8e191c954e36.jpg?v=1788701643"},{"product_id":"hayward-paramount-parajet-004852000000-install-and-removal-tool","title":"Hayward Paramount ParaJet Install and Removal Tool","description":"\u003cp\u003eThis is the Hayward Paramount install and removal tool, part 004852000000. It is listed for the ParaJet and is also given as the TwirlyByrd install and removal tool, so both names appear against the same number. Paramount also writes that number as 004-852-0000-00.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn in floor cleaning head sits flush with the pool floor by design, which leaves nothing to grip when it has to come out for service or replacement. This tool engages the head so it can be turned and lifted cleanly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy not improvise\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeads that are levered out with pliers, a screwdriver or a pair of channel locks usually come out damaged, and a cracked head means buying the head as well as the tool. Having the right tool on the shelf turns a routine service into a two minute job.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48626101944532,"sku":"PMT-25-5052","price":23.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5560dbf2-932b-464c-8d0e-f06ef8128399.png?v=1788704743"},{"product_id":"q360-infloor-valve-lid-w-oring","title":"Blue Square Manufacturing Q360 Infloor Valve Lid with O-Ring","description":"\u003cp\u003eBlue Square 1130499 is the replacement water valve lid, complete with its o-ring, for the Q360 in-floor pool cleaning system. It is the genuine Blue Square part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it covers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe water valve is the piece of an in-floor system that routes flow to each zone in turn, and its lid is the access point. That lid comes off every time the valve is serviced, which means it takes the wear: the rim gets nicked, the plastic cracks, or the o-ring flattens and the valve starts seeping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the o-ring matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the lid and o-ring are supplied together, both halves of the seal are new at the same time. Fitting a new lid onto an old, hardened o-ring, or a new o-ring under a cracked lid, tends to send you back to the same valve a season later.\u003c\/p\u003e","brand":"Blue Square","offers":[{"title":"Default Title","offer_id":48626104828116,"sku":"BSM-201-1007","price":55.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/blue-square-1130499-q360-infloor-valve-lid-w-oring.jpg?v=1788704842"},{"product_id":"bulkhead-wrench-2","title":"Pentair 2 in. Bulkhead Wrench","description":"\u003cp\u003eThis is the Pentair 151602 bulkhead wrench, sized for 2 in. bulkhead fittings. Pentair catalogs it with the Triton II sand filters, models TR40, TR50, TR60, TR100 and TR140.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a dedicated wrench\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA bulkhead fitting is a molded plastic part that sits in the filter tank wall and takes real torque to seat or break loose. Nothing in a general tool box grips it properly. People reach for large pliers or a pipe wrench, and the fitting ends up scarred or split, which turns a service job into a parts order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA genuine Pentair hand tool, part 151602, for 2 in. bulkhead fittings. It ships by parcel.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626220138708,"sku":"PAC-051-2798","price":268.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0a9a747f-7dcf-474b-9034-d787ce40540f.gif?v=1788706460"},{"product_id":"paramount-retrojet-004652495401-white-for-bayonet-caretaker-99-nozzle","title":"Paramount White RetroJet for Bayonet Caretaker 99 Nozzle","description":"\u003cp\u003eThis is the Paramount RetroJet nozzle in white, made for bayonet style Caretaker 99 in floor cleaning heads. It is listed as part 004652495401, and the same part also appears written as 004-652-4954-01.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn floor cleaning works by popping nozzles up out of the pool floor in sequence and driving debris toward the main drain. Each nozzle has to throw a strong, correctly aimed jet to do its share. When one wears, its jet weakens or points the wrong way, and dirt collects in the same patch of floor every cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck that your heads are the bayonet fitting style. This listing is a single nozzle, so count how many heads need replacing across the floor. Paramount also makes a RetroJet installation tool for pulling and seating the nozzles, sold separately, which is worth having if you are doing more than one.\u003c\/p\u003e","brand":"Paramount","offers":[{"title":"Default Title","offer_id":48626477367508,"sku":"PMT-20-719","price":62.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3baa7e8f-1146-4383-afe1-896b2d409fc5.png?v=1788710681"},{"product_id":"pcc2000-popup-head-step-nozzle-black","title":"Paramount PCC2000 Popup Head Step Nozzle, Black","description":"\u003cp\u003eThe Paramount 004-552-5032-03 is the black step nozzle for popup heads on the PCC2000 in-floor cleaning system. It is the genuine Paramount part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the step nozzle is its own part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA PCC2000 system feeds a set of popup heads that rise, sweep and drop back flush. The heads on steps and benches use a nozzle chosen for that position, which is why Paramount lists it separately from the floor nozzles. Ordering the wrong one means the head fits but does not sweep the way it should.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNozzles wear from years of grit passing through them, and they crack or snap off when something heavy lands on a step. If one head has stopped clearing its area while the rest of the system still works, the nozzle is the first thing to look at.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48626479497428,"sku":"PMT-201-866","price":97.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_43ebc11b-9875-45e3-ac7a-30ca7d5ab395.jpg?v=1788710721"},{"product_id":"infloor-valve-overhaul-kit","title":"Blue Square Q360+ Infloor Valve Overhaul Kit","description":"\u003cp\u003eBlue Square 1130999 is the overhaul kit for the Q360+ infloor valve. It brings the three parts that actually wear inside the valve into one box: the gear cassette, the turbine, and the lid with its o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace all three\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater drives the turbine, the turbine drives the gear cassette, and the cassette is what steps the valve from one zone to the next. When indexing gets slow, sticks on a zone, or stops advancing altogether, the fault is usually spread across the turbine and the cassette rather than sitting in one of them. Changing the pair at the same time is the difference between a valve that indexes cleanly again and one that is back apart a month later.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSealing it back up\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid comes with its o-ring, so the valve seals properly once it is closed. An old lid o-ring that has flattened or taken a set is a common source of weeping around the valve after a service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the Blue Square OEM kit, part 1130999, made for the Q360+ cleaning model.\u003c\/p\u003e","brand":"Blue Square","offers":[{"title":"Default Title","offer_id":48626702942420,"sku":"BSM-201-1037","price":178.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ce3ed5f4-6305-4222-8862-6b2a2550e469.jpg?v=1788713862"},{"product_id":"pcc2000-step-nozzle-tool-plastic-handle","title":"Paramount PCC2000 Step Nozzle Tool with Plastic Handle","description":"\u003cp\u003eThe Paramount 004-552-5452-00 is the step nozzle tool for the PCC2000 in floor cleaning system, supplied with the plastic handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA PCC2000 puts nozzles in the steps and benches as well as the pool floor. Those nozzles come out for service, and this is the hand tool made to work them. Using the tool made for the job avoids chewing up the nozzle or the seat around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the tool on its own. Replacement step nozzles and popup heads are separate Paramount items, so order those alongside it if the nozzles themselves are worn.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48626830409940,"sku":"PMT-201-830","price":34.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3ab01908-4a94-42ec-93f7-81586b2a28c9.jpg?v=1788715665"},{"product_id":"pop-up-threaded-cleaning-head-white","title":"Polaris Caretaker Pop Up Threaded Cleaning Head, White","description":"\u003cp\u003eThis is the Caretaker pop up threaded cleaning head in white, part 3-9-515, made for the Caretaker In-Floor Cleaning System. It measures 3.5 inches by 2 inches and threads into the collar fitting with a quarter turn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn in-floor system works by sending pressurized water to a group of heads at a time. Each head rises out of the floor, sweeps its jet across the surrounding surface, and drops back flush while the next zone takes its turn. Debris gets pushed toward the main drain rather than being left for a cleaner to find.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeads cycle up and down thousands of times a season, and they eventually stick down, stick up, or wear out the nozzle so the sweep loses its reach. The usual sign is one patch of floor that stays dirty while the rest of the pool comes clean. Replacing the head in that zone is normally all that is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the threaded style. Confirm that your collars take a threaded head rather than another fitting type, since the styles do not interchange.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48627602620628,"sku":"CTK-201-794","price":97.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_288c23dd-aa14-43b1-975f-72740327373e.jpg?v=1788724113"},{"product_id":"retrojet-nozzle-for-pool-valet","title":"Paramount RetroJet Nozzle for Pool Valet","description":"\u003cp\u003eThis is the RetroJet nozzle for the Pool Valet in floor cleaning system, part number 006-502-4714-01. It is the head that pops up out of the pool floor, sweeps debris toward the main drain and drops back down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn floor heads wear from the inside. A nozzle that no longer rotates through its arc, or one that stays stuck up or stuck down, leaves a dead patch of floor that starts holding dirt. That patch is usually the first sign, before anyone looks at the head itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is a single nozzle. A Pool Valet system runs a circuit of heads, so it is worth checking each port and ordering the number you actually need. A nozzle removal tool and an installation tool for this job are sold separately.\u003c\/p\u003e","brand":"Paramount","offers":[{"title":"Default Title","offer_id":48627618971860,"sku":"PMT-201-807","price":120.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2beb2f2c-f88e-4011-a578-da2dd30d8858.jpg?v=1788725419"},{"product_id":"a-a-522917-valve-repair-kit-for-5-port-top-feed-actuator-valve","title":"Pentair Valve Repair Kit for 5-Port Top Feed Actuator Valve","description":"\u003cp\u003eThis is the repair kit for the top feed actuator valve used on A\u0026amp;A in-floor cleaning systems. It is listed as Pentair 230060 and also as 522917.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn in-floor cleaning system does not run every head at once. The actuator valve takes water from the pump and hands it to one group of heads at a time, stepping through the zones so each part of the floor gets full pressure. When the valve wears, zones stop switching cleanly or lose pressure, and the floor stops getting cleaned evenly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the port count\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source data for this kit is not consistent about port count: it is called a 5 port kit in one place and a 6 port kit in another. Both readings are on record here, so count the ports on your own valve before ordering rather than assuming. Both part numbers, 230060 and 522917, belong to this kit.\u003c\/p\u003e","brand":"A\u0026A Manufacturing","offers":[{"title":"Default Title","offer_id":48627623297236,"sku":"ANA-201-729","price":139.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2e54a554-3643-459f-8a2a-d4819e384996.jpg?v=1788725492"},{"product_id":"retroclean-in-floor-cleaning-head","title":"Polaris Caretaker Retroclean In-Floor Cleaning Head","description":"\u003cp\u003eThe Polaris Caretaker 4-9-2005 is a Retroclean pop up in-floor cleaning head, the Master TurboClean high flow version, in white. It is also listed under the substitute part number 3225-161.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow an in-floor head works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn in-floor cleaning system feeds pressurized water to a group of heads set flush into the pool floor. When a head takes pressure it rises, sweeps its jet across an arc of floor, then drops back level so nobody catches a foot on it. The heads run in sequence, and between them they push debris toward the main drain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the heads work in a rotation, a single failure is easy to miss until debris starts collecting in one patch of floor every cycle. Watch a cycle run and look for a head that does not rise, or that rises but no longer turns through its pattern. That is the one to change.\u003c\/p\u003e","brand":"Caretaker","offers":[{"title":"Default Title","offer_id":48627720421588,"sku":"CTK-201-906","price":108.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_02e84484-26c4-4d70-847f-f60d10d5ca8b.jpg?v=1788727094"},{"product_id":"nonventuri-internal-retro-head-white","title":"Pentair Nonventuri Internal Retro Head, White","description":"\u003cp\u003eThe Pentair 236671 is the non-venturi internal retro-head for the Style II G2 Series, supplied in white. It is the internal, the working part that sits inside the cleaning head body set in the pool floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInternal, not the whole head\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn floor cleaning systems are built so the body stays put in the shell and the internal can be pulled and replaced. That is what a retro-head is for. When a head stops popping up, stops rotating through its pattern, or leaks past, the internal is what gets changed, and the plumbing is never disturbed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo things matter: venturi or non-venturi, and color. This is the non-venturi internal in white. The gray version is a separate Pentair part number, so pull one of your existing internals and match it before you order a set.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627758465236,"sku":"ANA-20-905","price":36.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d20f51c1-a04a-4688-ae82-50fee7596ecb.jpg?v=1788727762"},{"product_id":"blue-square-11420-gr-gray-q360-performance-jet-with-3-nozzles","title":"Blue Square Gray Q360+ Performance Jet with 3 Nozzles","description":"\u003cp\u003eThe Blue Square 11420-GR is the Q360+ performance jet in gray, supplied with three nozzles. It is part of the Blue Square Q360 in floor cleaning range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe jet drops into the Q360 gunite jet collar housing in the pool floor. The rest of the system, the actuator turbine, the gear cassette and the valve parts, carry their own Blue Square part numbers and are ordered separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn floor heads work in an abrasive environment and lose performance as the nozzles wear. When a section of floor stops getting swept and debris starts collecting in the same spot every time, the head serving that area is usually the part to look at first.\u003c\/p\u003e","brand":"Blue Square","offers":[{"title":"Default Title","offer_id":48627854835924,"sku":"BSM-20-1010","price":88.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c4a58876-b152-4af4-b18e-26f271a9639f.jpg?v=1788728400"},{"product_id":"eyeball-seat-removal-tool","title":"Hayward Eyeball Seat Removal Tool, White","description":"\u003cp\u003eThe Hayward SP1419T is the tool for the collar that threads into the pool wall behind a return jet. It drops into the two grooves cast into the seat and gives you the purchase to unscrew it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a dedicated tool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seat sits flush in the wall with nothing to grab. Pliers and screwdrivers slip, and a collar that gets chewed up is far more work to deal with than the jet you set out to replace. The SP1419T engages the grooves the fitting was designed around, so the collar turns instead of the tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you will want it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny time return jets are being replaced or a seat has to come out of the wall. It is a small tool that spends most of the year in the shed and earns its place the day the jets are due.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627902775508,"sku":"HAY-60-5159","price":9.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_50e27f82-fe2d-4a37-861c-cbc8aa45b200.jpg?v=1788729707"},{"product_id":"pool-tool-141-closed-impeller-cleaning-kit","title":"Pool Tool Inc. 141 Closed Impeller Cleaning Kit","description":"\u003cp\u003eThe Pool Tool Inc. 141 is a cleaning kit for closed pump impellers. It is sold as a kit under the one part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy closed impellers need a tool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a closed impeller the vanes are sandwiched between two shrouds, so the passages are enclosed and there is no way to reach in and pull debris out with your fingers. Hair, leaf stems and grit collect in those passages and choke flow. The symptoms are familiar: slow priming, weak suction, and less water at the returns even with a clean pump basket and a clean filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe alternative\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWithout a dedicated tool the fix is stripping the wet end down far enough to get the impeller off, which is a much longer job. Clearing the passages in place is what this kit is for.\u003c\/p\u003e","brand":"Pool Tool","offers":[{"title":"Default Title","offer_id":48627969360084,"sku":"PTE-67-5022","price":32.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PTE-67-5022_1a.png?v=1788731991"},{"product_id":"wrench-dura-grip-iii","title":"Hayward Wrench, Dura Grip III","description":"\u003cp\u003eThe Dura Grip III is a molded PVC wrench, Hayward part DG3-1, made for opening pool lids that have tightened up in service. It is listed for the CL200 chlorinator lid as well as Dura Glas, Swim Quip and Challenger lids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a proper wrench\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA chlorinator or pump lid that has been on for a season is often too tight for bare hands. The usual improvised fixes, a screwdriver in the slot or a pair of pliers on the rim, put all the force on one small area and crack the lid. This wrench spreads the load across the lid so you can apply steady torque without damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeep it from happening again\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost seized lids are a dry o-ring. Once the lid is off, clean the o-ring and its groove and lubricate before reassembly, and the lid should come off by hand next time.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628732887252,"sku":"LSS-60-6502","price":25.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f9d56fa9-52d2-482f-90f1-6e0342b90b27.jpg?v=1788749333"},{"product_id":"main-drain-suction-mat","title":"Pool Tool Inc. Main Drain Suction Mat","description":"\u003cp\u003eThe Pool Tool 125 main drain suction mat is a simple fix for weak vacuum suction. Laid over the main drain, it shifts the pump pull to the skimmer, where the vacuum hose is connected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePush the mat into place over the drain with your pool net. A 3 inch steel plate inside gives it enough weight to sit flat, and the flexible PVC body conforms to the drain. When you are finished vacuuming, catch the stainless steel hook with the net and lift the mat out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mat is 12 inches across overall and 1\/16 inch thick, so it stores flat and takes up no real space between uses.\u003c\/p\u003e","brand":"Pool Tool","offers":[{"title":"Default Title","offer_id":48628742717652,"sku":"PTE-251-1000","price":51.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PTE-251-1000_1a.png?v=1788749552"},{"product_id":"pentair-a-a-gamma-series-4-venturi-g4v-pop-up-head-light-gray-231202","title":"Pentair A\u0026A Gamma Series 4 Venturi G4V Pop-Up Head, Light Gray","description":"\u003cp\u003ePentair A\u0026amp;A 231202 is the Gamma Series 4 venturi G4V pop-up head in light gray. It is the genuine part for A\u0026amp;A Gamma Series 4 in floor cleaning systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow a pop-up head works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe water valve feeds pressure to one zone of heads at a time. Each head in that zone rises out of the floor, sweeps its sector of the pool with a jet that pushes debris toward the main drain, and then drops flush again when the valve moves to the next zone. Because the head sits in the floor, it is walked on constantly and is a normal wear item.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck which A\u0026amp;A series is installed in your pool. This is the Series 4 head, and heads are not interchangeable between series. The light gray finish suits lighter plaster and pebble interiors, and other colors are separate part numbers.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628753105108,"sku":"ANA-201-5816","price":92.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1aa58c5b-f427-40e5-91e1-c53bded1dd4d.jpg?v=1788749735"},{"product_id":"filter-flosser-cartridge-filter-cleaning-tool","title":"Mikise Filter Flosser Cartridge Filter Cleaning Tool","description":"\u003cp\u003eThe Filter Flosser is a cleaning tool for pleated cartridge filter elements. It produces a powerful, evenly dispersed spray that gets down between the pleats, working like a water pick on the media.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it actually does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAlongside the spray it sets up a water and air agitation action, and that is what shifts dirt deposits sitting deep in the cartridge. A plain hose nozzle rinses the tops of the pleats and leaves the base of the folds packed, which is why a cartridge can look clean and still run high pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits in the routine\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUse it for the regular clean between soaks. Oils and mineral scale still need a chemical soak to release, but debris and dirt are what block a cartridge day to day, and clearing those properly is what keeps the element working to its rated area.\u003c\/p\u003e","brand":"Mikise","offers":[{"title":"Default Title","offer_id":48628828831956,"sku":"MIK-60-1000","price":38.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1b20d2d6-f846-4750-a22b-7c0d70e2870a.jpg?v=1788753512"},{"product_id":"pcc2000-popup-head-step-nozzle-gray","title":"Paramount PCC2000 Popup Head Step Nozzle, Gray","description":"\u003cp\u003eThis is the PCC2000 popup head step nozzle in gray, part number 004-552-5032-02. It is the nozzle fitted to the popup heads that clean the steps in a PCC2000 in floor cleaning system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering the right nozzle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePopup heads in an in floor system are not all the same. A step position uses a nozzle shaped for a shorter, shallower throw than a floor position, because the water only has to move debris off the tread. Check the position you are replacing before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe nozzle replaces the existing one in the head. The buried body stays where it is, so this is a surface level swap rather than a plumbing job.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628833353940,"sku":"PMT-201-821","price":91.01,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0509d68d-3d1e-49c3-9733-c2a2cc53817d.jpg?v=1788753673"},{"product_id":"style-ii-3-prong-tool","title":"Pentair Style II 3 Prong Tool","description":"\u003cp\u003eThe Pentair 229940 is the Style 2 plastic installation tool, a three prong tool made for Style 2 pop-up heads in an in floor cleaning system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePop-up heads sit flush in the pool floor and have to come out for cleaning and replacement. The three prongs on this tool engage the head evenly and turn it, so the head lifts instead of binding on one side. The same tool sets a new head back in and holds it while you clean debris out of the nozzle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the right tool pays for itself\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHeads are routinely broken by whatever was to hand, usually a screwdriver or a pair of pliers, and a broken head is a much larger job than a stuck one. The tool is plastic on purpose: it grips without scratching or deforming the collar, and one tool serves every Style 2 head in the pool.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628833845460,"sku":"ANA-201-749","price":23.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4ab86659-30e6-46b2-8068-fee4bfdc7005.jpg?v=1788753718"},{"product_id":"retrojet-installation-tool","title":"Paramount RetroJet Installation Tool","description":"\u003cp\u003eThis is the Paramount RetroJet installation tool, part number 004-652-5422-00, used to install and remove RetroJet nozzles in an in floor cleaning system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRetroJet nozzles sit flush in the pool floor and give nothing for a pair of pliers to hold. The tool engages the nozzle at the point Paramount designed it to be turned from, so the nozzle comes out intact and the new one goes back in seated correctly. Working without it is how nozzle bodies get chewed up and how a routine swap turns into a bigger repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt covers all Paramount RetroJets with one exception, the Pool Valet Retro. For a pool full of RetroJet heads that means one tool handles the whole floor, which makes it a sensible thing to keep with spare nozzles rather than borrow when a head fails.\u003c\/p\u003e","brand":"Paramount","offers":[{"title":"Default Title","offer_id":48628860977364,"sku":"PMT-201-863","price":40.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_44fcf8ad-3490-4d4c-a5e2-33b0d1b8c80c.jpg?v=1788755591"},{"product_id":"pumice-stone-large","title":"US Pumice Co Pumice Stone, Large","description":"\u003cp\u003eA large block of natural pumice for cleaning the waterline. It is the tool for the chalky calcium band, rust marks and stubborn staining that build on ceramic tile and on concrete pool surfaces, and it works by abrasion alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo effect on the water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the block is chemically neutral, nothing dissolves off it into the pool and the pH balance is left alone. That makes it a straightforward job to do with the water in place, unlike acid cleaning, and it often lifts deposit that strong acid cleaners have not shifted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to use it, and where not to\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUse it on ceramic tile and on molded or pneumatically formed concrete. Keep it off vinyl liners, fiberglass shells and painted surfaces, because pumice is hard enough to scratch them. Keep the block and the surface wet while you work, and rinse the loose grit away as you go.\u003c\/p\u003e","brand":"US Pumice","offers":[{"title":"Default Title","offer_id":48628941717716,"sku":"USP-40-5500","price":15.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_27cb0eb9-8b78-4d51-92be-15ace51ed3fd.jpg?v=1788758279"},{"product_id":"2-port-5-gear-module","title":"Paramount 2-Port 5 Gear Module","description":"\u003cp\u003eThe Paramount 004-302-4402-00 is the 2-port 5 gear module used inside Paramount in-floor cleaning system water valves. It is supplied with the valve shell O-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn in-floor cleaning system does not run every head at once. The water valve feeds one group at a time and steps to the next group on a fixed cycle, and the gear module is the mechanism that does the stepping. When it wears out, the cycle stalls: some heads pop up and stay up, others never rise, and the floor stops getting swept evenly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the port count and gear count on the module you are replacing. This is the 2-port 5 gear version, and Paramount builds the same valve family in other configurations. It is listed for the PCC 2000, Pool Valet, PV3, CyClean, Vanquish and Vantage systems.\u003c\/p\u003e","brand":"Paramount","offers":[{"title":"Default Title","offer_id":48628950237396,"sku":"PMT-201-737","price":345.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ff4a3c8b-0a4a-48b3-b367-40b28f096ed2.jpg?v=1788758409"},{"product_id":"a-a-540189-leafvac-lid-assembly","title":"Pentair A\u0026A LeafVac Lid Assembly","description":"\u003cp\u003eThis is the LeafVac lid assembly, part number 540189, the replacement lid for the A\u0026amp;A LeafVac debris canister.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the lid matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe LeafVac only works while it is sealed. The lid holds the vacuum in the line so leaves and debris are drawn into the canister and held there. Once the lid is cracked, warped or no longer clamping flat, the canister loses suction and debris carries on toward the pump basket instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo things worth checking\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid o-ring is a separate part, so it is worth ordering one at the same time rather than fitting a new lid onto a flattened seal. Our source data also lists this lid under a second number, 219200, so compare both against the number on your old lid before you order.\u003c\/p\u003e","brand":"A\u0026A Manufacturing","offers":[{"title":"Default Title","offer_id":48629086060756,"sku":"ANA-201-789","price":85.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fec8be8f-49d6-49d5-a2f3-4ec244ba9171.jpg?v=1788759582"},{"product_id":"blue-square-1145100-pro-tool-1-for-q360-a-a-and-caretaker-jets","title":"Blue Square 1145100 Pro Tool #1 for Q360\/A\u0026A and Caretaker Jets","description":"\u003cp\u003eThe Blue Square 1145100 is Pro Tool #1, the service tool used on Q360, A\u0026amp;A and Caretaker in-floor cleaning jets. It is the genuine Blue Square part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBlue Square builds hydraulically efficient replacements for the in-floor pop up jets that come with older cleaning systems. Working on those heads takes the right tool, and this is the one matched to the Q360, A\u0026amp;A and Caretaker designs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tool alone. Replacement cleaning heads are separate Blue Square parts. Because it is a tool rather than a wear part, most owners and service techs buy it once and keep it with the rest of the pool kit.\u003c\/p\u003e","brand":"Blue Square","offers":[{"title":"Default Title","offer_id":48629125808340,"sku":"BSM-20-1008","price":67.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_da63ad8e-3a28-4ab2-91a1-de07360df984.jpg?v=1788759898"},{"product_id":"pentair-236243-style-ii-low-flow-internal-step-cleaning-head-for-magnasweep-cleaning-system-gray","title":"Pentair 236243 Style II Low Flow Internal Step Cleaning Head for MagnaSweep Cleaning System, Gray","description":"\u003cp\u003ePentair 236243 is the Style II low flow internal step cleaning head for the MagnaSweep in-floor cleaning system, supplied in gray. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn in-floor cleaning system runs its steps on a separate, lower flow circuit than the main pool floor. This head is the one that pops up on the step tread and sweeps debris off it. When a step head stops rising or stops turning, leaves and grit simply sit on the steps while the rest of the pool cleans normally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering the right head\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHead style matters on these systems. This listing is the Style II low flow internal step head, in gray, for MagnaSweep. Check the style stamped on the head you are replacing before you order.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629126758612,"sku":"ANA-201-839","price":52.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_81840c3a-9bd7-4956-b31c-5218af81f7da.jpg?v=1788759902"},{"product_id":"q360-infloor-valve-body","title":"Blue Square Manufacturing Q360 Infloor Valve Body","description":"\u003cp\u003eThe Blue Square 1130199 is the valve body for the Q360 infloor cleaning system. It is the genuine Blue Square part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn infloor cleaning system does not run every floor head at once. A water valve takes the flow from the pump and directs it to one zone at a time, stepping through the zones so each group of pop up heads gets enough pressure to actually rise and sweep. The body is the housing that whole assembly is built into and that the plumbing connects to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the body on its own. If the valve has been leaking or the zones have stopped indexing, check the internal parts as well while it is apart, since those are separate items.\u003c\/p\u003e","brand":"Blue Square","offers":[{"title":"Default Title","offer_id":48629149925588,"sku":"BSM-201-1031","price":261.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/blue-square-1130199-q360-infloor-valve-body.jpg?v=1788759990"},{"product_id":"caretaker-replacement-3-9-507-bayonet-style-cleaning-head-light-gray-color","title":"Caretaker Bayonet Style Cleaning Head Only, Light Gray","description":"\u003cp\u003eThe Caretaker 3-9-507 is a bayonet style cleaning head in light gray, for the Caretaker In-Floor Cleaning System. It is supplied as the head on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the system uses it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn in-floor system works by sending pressurized water to a set of heads set into the pool floor. Each one rises, sweeps its arc, and drops back flush. That is what keeps dirt and debris moving toward the drain instead of settling. Every head is responsible for its own patch of floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHead only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe collar in the floor stays where it is. This head is a bayonet fitting that snaps into it, which means the replacement is a job you do standing in the pool with no tools. Confirm the fitting style before ordering, since the styles do not cross over.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the color you already have\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis one is light gray. The same head is made in other colors, and mixing them shows, so check what is already in your floor before you order a set.\u003c\/p\u003e","brand":"Caretaker","offers":[{"title":"Default Title","offer_id":48629293908180,"sku":"CTK-201-833","price":109.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c48f2b3e-f0ef-46ef-af60-32b17344a91e.jpg?v=1788762039"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/maintenance-equipment.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}