{"title":"Pentair Parts","description":"\u003cp\u003ePentair parts at Active Pool Supply, genuine OEM and quality aftermarket.\u003c\/p\u003e","products":[{"product_id":"pentair-170145-starite-s7m120-large-and-small-cartridge-250210200s-250220201s","title":"Sta-Rite 170145 System 3 S7M120 Large and Small Cartridge Set, 25021-0200S and 25022-0201S","description":"\u003cp\u003ePentair 170145 is the genuine replacement cartridge pack for the Sta-Rite System 3 S7M120, the 21 in. modular media filter. It contains both elements the filter uses: the 25021-0200S inner cartridge and the 25022-0201S outer cartridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo cartridges that work as one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe System 3 nests a smaller cartridge inside a larger one. The inner element measures 11 in. by 11 in. by 31.25 in. and the outer 19 in. by 19 in. by 23 in. Together they give the filter its full surface area, which is why replacing only one of them rarely brings performance back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCartridges are cleaned many times over their life, but eventually hosing no longer returns the pressure gauge to its clean reading, and pleats start to fray or collapse. That is the point to fit a new pack rather than keep cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis pack fits the S7M120 only. The S8M150, S7M400 and S8M500 in the same family take different cartridges. The model is on the tank label.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48620697419988,"sku":"STA-051-6578","price":464.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f157c2cb-828b-49b3-a55b-ba75c7ec9a62.png?v=1788573177"},{"product_id":"pentair-intellichlor-lt25-salt-chlorine-generator-cell-25-000-gallons-523747-ec","title":"Pentair IntelliChlor LT25 Salt Chlorine Generator Cell, 25,000 Gallons, 523747-EC","description":"\u003cp\u003eThe Pentair IntelliChlor LT25 is the current 2025 salt chlorine generator cell for pools up to 25,000 gallons. It replaces the IntelliChlor IC20 and the iChlor 30 directly and runs on the power center you already have. The LT25 is shorter than the IC20, so Pentair ships two installation adapters in the box that bring it to the original length. Nothing has to be replumbed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutput and control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAt 100% output the cell produces 0.90 lb of chlorine per 24 hours. An LCD\/LED display shows system status, chlorine output and diagnostic information at a glance. SmartSense turns generation down automatically when the pump is off or the cover is closed, which saves cell life, and a redesigned conductivity sensor gives more accurate salt readings than earlier cells.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to be serviced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe LT25 is modular. The onboard computer separates from the cell, so the cell can be acid cleaned without handling the electronics, and the sensors and electronics can be replaced individually instead of replacing the whole unit. Regular polarity reversal keeps scale from building on the plates, and an acid cleaning stand is included for the times it does.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew to salt?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cell on its own needs a power center. For a new system, add the Pentair EC-520556 power center, 110\/220V with the power cable included, which also ties into EasyTouch and IntelliTouch automation. If your pool is over 25,000 gallons, or you are replacing an IC40, the IntelliChlor Plus40 is the right size.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624545530068,"sku":"PAC-45-1569","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ad192c5c-f713-4a25-b867-8acad43dd0b8.png?v=1788643155"},{"product_id":"pentair-intellichlor-523769-replacement-intellichlor®-plus-and-lt-sensor-board","title":"Pentair IntelliChlor Plus and LT Replacement Sensor Board, 523769","description":"\u003cp\u003eThe Pentair 523769 is the replacement sensor board for the IntelliChlor Plus and IntelliChlor LT salt chlorine generators. One part covers every model in both families.\u003c\/p\u003e\u003cp\u003eThe Plus and LT cells are designed in modules, and the sensor board is one of them. That means a sensor fault is fixed by swapping this board rather than replacing the cell. Pentair measured the difference in its own lab: replacing the sensor module on an IntelliChlor Plus 30 took 53% less time on average than the same job on an IntelliChlor 15. Results will vary with the installation.\u003c\/p\u003e\u003cp\u003eThe controller (HMI) is a separate module and a separate part. If you are opening the cell, a 10 pack of IntelliChlor gaskets is worth having on the truck.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624546087124,"sku":"PAC-451-3407","price":392.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6c265683-b054-432d-91d6-330abb5698f9.png?v=1788643187"},{"product_id":"prowler®-920-930-motor-unit","title":"Pentair Prowler 920\/930 Motor Unit, 360365","description":"\u003cp\u003eThe Pentair 360365 is the replacement motor unit for the Kreepy Krauly Prowler 920 and Prowler 930 robotic pool cleaners. It is a genuine Pentair OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe part that does the work\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery Prowler cleans with a high speed front scrubbing action that works the floor and the walls, and the motor unit is what drives it. When the motor is worn the cleaner slows, stalls or stops climbing, and the fix is to replace the unit as a whole rather than attempt a repair inside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKeep the rest of the robot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA new motor unit goes into the existing body and works with the cable, brushes and filters you already have. Front brush assemblies, cartridge filter kits and the 930 communication cable are available separately if those need attention at the same time.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624549036244,"sku":"KPY-201-0238","price":651.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_48212bb1-3504-4da0-9284-9c3892082de5.jpg?v=1788643246"},{"product_id":"pump-housing-eq-series","title":"Pentair Pump Housing, EQ Series, 356755","description":"\u003cp\u003eThis is the genuine Pentair replacement pump housing for EQ Series commercial pool pumps, part number 356755. It is a new OEM part, not a rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for the Pentair EQ Series. Confirm 356755 against the EQ Series parts diagram for your pump before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 5-3\/4 in. ID lid o-ring is a separate part. If the old one is flattened or cracked, replace it at the same time so the new housing seals properly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624551919828,"sku":"PAC-101-6502","price":2904.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dd78a9e1-e8d3-4b1b-b560-81df84f27deb.jpg?v=1788642999"},{"product_id":"pot-optiflo","title":"Pentair OptiFlo Strainer Pot with Drain Plug, 357228Z","description":"\u003cp\u003eThe Pentair 357228Z is the strainer pot for the OptiFlo above ground pool and spa pump, supplied with its drain plugs. It also fits the Jacuzzi JPA Pro Grade pump that Leslie's sells as 622383, which shares the same wet end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePots crack when water is left in them over a freeze or when the lid is cranked down too hard. Once the pot leaks, the pump draws air, loses prime and runs hot. Replacing the pot restores the seal without replacing the whole pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pot body and the drain plugs. The lid, lid o-ring, clamp and basket are not part of this listing, so check those while the pump is apart.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624552902868,"sku":"PAC-101-0019","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_85f16557-4f41-481b-a715-45068584b97a.jpg?v=1788643040"},{"product_id":"2-valve-kit-multiport-side-mount-sand-filters-sm-20-3","title":"Pentair 2 in. Multiport Valve Kit for Side Mount Sand Filters, SM-20-3, 261055","description":"\u003cp\u003ePentair 261055, model SM-20-3, is the 2 in. threaded multiport backwash valve for side mount Pentair filters. It is the genuine Pentair valve listed for Triton II sand filters and Quad DE filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix positions plus winterizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve handle locks positively into each of its six operating positions, and a separate winterizing position lets the valve body drain when the system is laid up. The body is PVC, made for the working pressures of a side mount sand filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSide mount valves are matched to the filter by port spacing. This one measures 7-1\/2 in. centerline to centerline between the filter ports and has 2 in. threaded connections. Measure your existing valve before ordering; a different centerline will not line up.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624555229396,"sku":"PAC-06-229","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5ff5f2c8-e8ec-4605-a4dd-c84d1c5dc8b5.jpg?v=1788643321"},{"product_id":"prowler-930®-communication-cable","title":"Pentair Prowler 930 Communication Cable, 360446","description":"\u003cp\u003ePentair 360446 is the genuine replacement communication cable for the Kreepy Krauly Prowler 930 robotic pool cleaner. It is the link between the cleaner and its power supply, and it is the part on a robot that sees the hardest life: twisting on every turn, sun on the deck, and chlorine in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCuts or exposed wire along the jacket, a kink that will not straighten, or a cleaner that stops mid-cycle or will not respond are the usual signs. A new cable restores the cleaner without touching the drive or the power supply.\u003c\/p\u003e\u003cp\u003eThis is the cable only. The power supply is a separate Pentair part.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624555426004,"sku":"KPY-201-0309","price":343.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3836ed8f-3a16-4389-9dd6-336f07e33052.jpg?v=1788643340"},{"product_id":"intellichlor-110-220v-salt-chlorine-generator-power-center","title":"Pentair 110\/220V IntelliChlor Salt Chlorine Generator Power Center, EC-520556","description":"\u003cp\u003eThe Pentair EC-520556 is the power center for the IntelliChlor salt chlorine generator. It supplies power to the cell and carries the communication between the cell and the controls. It runs the IntelliChlor IC20, IC40 and IC60 cells and the current LT25 and Plus40.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControls and diagnostics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePush-button operation and easy to read displays give a quick check of salt level, system status and chlorine output. Full diagnostics include cell life tracking, which reports the remaining hours of cell life in real time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtecting the cell\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn automatic shut-off protects the unit and extends cell life when the water gets cold. On-time cycling keeps calcium and scale from building up on the cell plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe power center wires for 110 or 220V and includes its power cable. It is compatible with Pentair automation, including IntelliCenter, EasyTouch and IntelliTouch. Order it for a new salt system, or to replace a failed power center; an existing IntelliChlor system only needs the cell.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624831693012,"sku":"PAC-45-1556","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b9187e13-539e-493a-a70f-f48f12c70c93.jpg?v=1788643211"},{"product_id":"valve-1-5-6-way-clamp-style","title":"Pentair Genuine OEM HiFlow Valve 1.5 in. 6-Way Clamp Style, 262506","description":"\u003cp\u003eThe Pentair 262506 is the genuine HiFlow six position top mount multiport valve for Tagelus sand filters, supplied as a kit with the clamp and pressure gauge. It is the 1-1\/2 in. clamp style valve with a 6-1\/2 in. flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for years on the tank\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve body is corrosion resistant PVC and the diverter is heavy duty Noryl. A large one piece handle moves the six position positive lock diverter, which includes a dedicated winterizing position for closing the system down at the end of the season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDesigned for the Pentair Tagelus, the same valve appears in the parts breakdowns for the Pentair Sand Dollar and Meteor, the American Products Eclipse and the Sta-Rite Cristal-Flo II top mount filters. Confirm the 6-1\/2 in. flange and 1-1\/2 in. plumbing before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne top mount valve assembly, one pressure gauge and one clamp assembly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624832446676,"sku":"PAC-06-248","price":203.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6355f681-fefa-47a9-bec0-bd119949476f.png?v=1788643219"},{"product_id":"fns-plus-element-assembly-complete-48-sqft","title":"Pentair Genuine OEM FNS Plus Element Assembly Complete, 48 Sq Ft, 59023400","description":"\u003cp\u003eThe Pentair 59023400 is the complete element grid assembly for the FNS Plus 48 sq ft DE filter, model FNSP48. It is the genuine Pentair part, and it replaces the entire grid set in one go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the whole assembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDE grids wear together. When one has torn fabric or a blinded coat, the rest are usually not far behind, and swapping the complete assembly puts 48 sq ft of fresh filter area back in the tank without piecing grids onto an old set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the filter is the 48 sq ft FNS Plus. The assembly ships in a box 18.75 in. long, 19.0 in. wide and 30.5 in. high. The tank o-ring is not included; the 20-7\/8 in. ID o-ring for this tank is listed separately.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624832512212,"sku":"AMP-051-4018","price":393.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7b9c42a9-315b-4823-ad12-b678edf94b7f.png?v=1788643249"},{"product_id":"pentair-intellichlor-523735-ec-plus40-salt-chlorine-generator-cell-40k-gal","title":"Pentair IntelliChlor Plus40 Salt Chlorine Generator Replacement Cell, 40,000 Gallons, 523735-EC","description":"\u003cp\u003eThe Pentair IntelliChlor Plus40 is the 2025 salt chlorine generator cell for pools up to 40,000 gallons. It converts ordinary salt into chlorine in the return line, so there is no chlorine to buy, carry or store. It is the direct replacement for the IntelliChlor IC40: the same length, and fully compatible with existing IntelliChlor power centers and Pentair automation, so it drops in with no replumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModular, and easier to live with\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe onboard computer separates from the cell. That means the cell can go into the acid cleaning stand without the electronics coming near the acid, an improvement over earlier units that had to be handled as one piece. It also means sensors and electronics can be replaced individually in the field instead of writing off the whole unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmarter output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSmartSense adjusts chlorine generation when the pump is off or the pool cover is closed, so the cell is not producing chlorine nobody needs, and its life is extended accordingly. A redesigned conductivity sensor gives more accurate salt readings. The LCD\/LED display shows real time status, output level and salt level, with more than 20 built in diagnostics and warnings. Regular polarity reversal keeps scale off the plates between manual cleanings, and an acid cleaning kit ships with every unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew to salt?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you are building a system from scratch and do not already have a power center, you will also need the Pentair IntelliChlor Power Center, EC-520556. It runs on 110\/220V, includes the power cable, and works with EasyTouch and IntelliTouch automation.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624832544980,"sku":"PAC-45-1570","price":1819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3ebd880a-8785-40a4-bc0f-4d73f40bac28.png?v=1788643255"},{"product_id":"element-assembly-complete-36-sqft","title":"Pentair FNS Plus Filter Element Assembly Complete 36 Sqft, 59023500","description":"\u003cp\u003eThe Pentair 59023500 is the complete internal grid assembly for the 36 sq ft FNS Plus DE filter. Rather than a loose set of grids to fit one at a time, it arrives as the whole element: manifold, grids, grid retainer and thru rod, assembled and ready to set into the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace the element\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDE grids wear over years of backwashing and acid washing. Torn fabric lets DE pass back to the pool, blinded fabric shortens the cycle between cleanings, and a cracked manifold bypasses the grids altogether. If more than one or two grids are past saving, replacing the assembly as a unit is faster than rebuilding and gets the filter back to its rated flow in one step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis assembly is sized for the 36 sq ft FNS Plus tank. The 48 and 60 sq ft models take taller grids and a different part number, so check the label on your tank before ordering. It is the genuine Pentair part listed on the FNS Plus parts diagram.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624832872660,"sku":"AMP-051-4017","price":357.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_422abc41-a697-4f7e-b870-1b068447891b.jpg?v=1788642929"},{"product_id":"2-valve-kit-multiport-side-mound-de-filters-sm20-2","title":"Pentair 2\" Valve Kit Multiport, Side Mount DE Filters SM20-2, 261152","description":"\u003cp\u003eThe Pentair 261152 is the SM20-2 side mount multiport valve kit for Pentair FNS, FNS Plus and NSP DE filters. It has 2 in. PVC connections and a 7.5 in. centerline between the filter ports, which is the spacing on those side mount tanks. The kit includes the lock nuts that screw down onto the filter bulkheads to hold the valve tight and leak free.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo measurements settle whether this is the right valve: the plumbing size and the port spacing. This one is 2 in. with a 7.5 in. centerline. The same valve in 1.5 in. is the SM10-2, part 261153. If you are not sure, measure center to center across the two filter ports before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith the pump off and the system depressurized, unscrew the old lock nuts, lift the old valve off the bulkheads, seat the new valve and tighten the new nuts. The 2 in. PVC connections then glue up to the pump, return and waste lines in the usual way.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624832938196,"sku":"PAC-06-230","price":297.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f46d1517-4082-4426-86b6-75cdeccf66fc.jpg?v=1788642936"},{"product_id":"element-assembly-complete-60-sqft","title":"Pentair 60 Sq Ft Element Assembly Complete, 59023300","description":"\u003cp\u003eThe Pentair 59023300 is the complete grid element assembly for the 60 sq ft FNS Plus DE filter. It includes the full set of 30 in. tall grids already mounted on the manifold with the rods, so the whole internal assembly comes out and goes in as one piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace the assembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTorn grid fabric sends DE back to the pool and a cracked manifold does the same. If more than a grid or two is damaged, or the manifold itself is suspect, the complete assembly is the cleaner repair than rebuilding a used manifold with new grids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your filter is the 60 sq ft FNS Plus. While the tank is open, check the clamp, tank o-ring and inlet pipe assembly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624833102036,"sku":"AMP-051-4019","price":444.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9a81f71e-4249-425a-8eaf-6af3cb1c043c.png?v=1788643047"},{"product_id":"3-2kw-intellifloxfvsf-vsf-vs-svrs-i1-i2-motor","title":"Pentair 3.2 kW IntelliFloXF VSF, VSF, VS+SVRS, i1, i2 Motor, 350305S","description":"\u003cp\u003eThe Pentair 350305S is the 3.2 kW, 10 pole variable speed motor fitted to the larger IntelliFlo pumps. It is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntelliFloXF variable speed pumps built after August 2015, IntelliFlo 2 VST pumps, IntelliFlo i1 and i2 pumps built after April 2016 and IntelliFlo VS+SVRS pumps built after June 2016.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacture date matters. Check the date code on your pump label and confirm it falls inside the ranges above before ordering. Pumps built before those dates use a different motor.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624833134804,"sku":"PUR-101-3257","price":781.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PUR-101-3257_1a.png?v=1788643401"},{"product_id":"closure-kit-8-1-2-buttress-thread","title":"Pentair Genuine OEM 8-1\/2\" Triton II Buttress Thread Closure Kit, 154856Z","description":"\u003cp\u003eThe Pentair 154856Z is the 8-1\/2 in. buttress thread closure kit for Triton II and Triton C-3 side mount sand filters. It is the genuine Pentair part, also listed under the older number 154856.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich filters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTriton II models TR40, TR50, TR60, TR100 and TR140, and the commercial TR100C, TR140C and TR100C-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is needed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe closure is the large threaded fitting that seals the top of the tank. When it weeps under pressure, cracks from over tightening or the threads strip, a new closure kit is the fix. Pentair makes a plastic wrench for the 8.5 in. closure, and a little o-ring lubricant on the seal helps it seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck that your closure is 8-1\/2 in. with buttress threads. The smaller 6 in. closures come in both V thread and buttress thread versions and are different kits.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624833167572,"sku":"PAC-051-2821","price":227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7bd60c29-2e82-4bb6-a1ff-7673ce4fb917.jpg?v=1788643051"},{"product_id":"volute-replacement-kit","title":"Pentair WhisperFlo and IntelliFlo Volute Housing Replacement Kit, 357149","description":"\u003cp\u003ePentair 357149 replaces the entire housing side of a WhisperFlo or IntelliFlo pump in one order. It covers the WhisperFlo and WFE pump and pot, and the IntelliFlo VS, VF, VS-SVRS and i1 pumps, which all share this wet end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump housing 350015, seal plate kit 350201 with the mechanical shaft seal, lid 357151, the clamp, cam and ramp lock ring 357199, basket 070387, drain plug 071131, two drain plug gaskets 092115 and two lid o-rings 350013. Everything that seals is new, which is what makes a housing rebuild hold pressure the first time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReach for the full kit when the volute is cracked, when the drain plug threads have given up, or when the seal plate, lid and lock ring are all showing their age at once. The impeller and motor are not part of the kit; they bolt back on to the new seal plate. If a single component has failed, the part numbers above can be ordered individually instead.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624833265876,"sku":"PAC-101-1465","price":287.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2a1e5940-26c9-4c4d-8736-8dbdc6a4c1f7.png?v=1788643300"},{"product_id":"pentair-356922z-drive-kit-with-keypad","title":"Pentair IntelliFlo VSF Drive Kit With Keypad, 356922Z","description":"\u003cp\u003eThe Pentair 356922Z is the original drive kit with keypad for the IntelliFlo VSF variable speed and flow pump. The drive is the electronics package on top of the motor that runs the variable speed control and the display, and replacing it as a kit with the keypad restores the pump when the motor itself is still good.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the part number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair has released a newer drive for the same pump, part number 356944Z, and a newer drive kit, 356971Z. The 356922Z here is the original version. If you are matching an existing part or a service quote, check which number you were given.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your pump is the IntelliFlo VSF and not the IntelliFlo VS or the IntelliFlo3, which use different drives. Disconnect power at the breaker before any work on the drive.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624869966036,"sku":"PUR-101-0108","price":1191.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/356922Z_pentiar_drivekit.jpg?v=1788647578"},{"product_id":"pentair-mastertemp-125-manifold-kit-474972","title":"Pentair MasterTemp 125 Manifold Kit, 474972","description":"\u003cp\u003eThe Pentair 474972 is the manifold kit for the MasterTemp 125 pool and spa heater. It brings together the parts on the water side of the heater that wear or leak: the coil and tubesheet sealing o-ring kit, the bottom plate, the baffle plate, the bypass valve, the water pressure switch, a 5\/16 in. stainless steel washer and the hex cap screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOpening the manifold on a MasterTemp is most of the labor, whichever part failed. A weep at the tubesheet means new o-rings, a heater that short cycles or will not fire may be the pressure switch, and a sticking bypass valve throws off water flow through the exchanger. Having all of them in the box means the manifold goes back together once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit fits the MasterTemp 125 only; the 175 through 400 models use a different manifold. Check the rating plate on your heater and match the model before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624870326484,"sku":"PUR-151-5066","price":283.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_60d042a9-cfcf-4ff6-80f7-a500297015f9.jpg?v=1788647620"},{"product_id":"pentair-178546z-clean-and-clear-rp-tank-lid-200-sqft","title":"Pentair 150 sq ft and 200 sq ft Clean \u0026 Clear Replacement Tank Lid, 178546Z","description":"\u003cp\u003eThe Pentair 178546Z is the replacement tank lid for the Clean \u0026amp; Clear RP cartridge filters in the 150 sq ft and 200 sq ft sizes. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003eLike the tank it closes, the lid is injection molded polypropylene reinforced with fiberglass, so it does not corrode and it holds its shape under pressure. Sun and years of clamp cycles eventually crack or warp the original, and a lid that no longer seats flat will weep at the clamp no matter how often you change the o-ring.\u003c\/p\u003e\u003cp\u003eThis is the lid only. The locking ring assembly, tank o-ring and manual air relief valve are separate parts. Check the Clean \u0026amp; Clear RP parts diagram to confirm what else your filter needs.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624871276756,"sku":"AMP-051-1412","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d7e6c7ba-65d3-4834-a6a5-2d8c64852132.png?v=1788647670"},{"product_id":"pentair-360400-prowler-920-power-supply","title":"Pentair Prowler 920 Power Supply, 360400","description":"\u003cp\u003eThe Pentair 360400 is the genuine replacement power supply for the Prowler 920 robotic pool cleaner.\u003c\/p\u003e\u003cp\u003eThe power supply converts household power to the low voltage the robot runs on and manages its cleaning cycle. When a Prowler 920 will not start, drops out partway through a cycle or shows no life at the unit, the power supply is a more common cause than the cleaner motor, and replacing it is the simpler fix.\u003c\/p\u003e\u003cp\u003eThis is the power supply only. The cleaner and its communication cable are not included, and it is listed specifically for the Prowler 920, so confirm your model before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624871342292,"sku":"KPY-201-1001","price":421.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/Pentair_360400_1a.png?v=1788647678"},{"product_id":"clamp-kit-with-tension-control","title":"Pentair Genuine OEM Clamp Kit with Tension Control, 190003","description":"\u003cp\u003eThe Pentair 190003 is the tank clamp kit for the Clean and Clear Plus cartridge filters, FNS Plus DE filters and Quad DE filters. The same tanks were sold under the PacFab and American Products names, and this kit fits those too. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe metal clamp band, a washer and the spring barrel nut assembly. The spring is the tension control: it keeps an even load on the band as you tighten, so the tank halves seal evenly and the clamp is not overtightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clamp measures roughly 23-1\/4 in. long, 22-1\/4 in. wide and 2-1\/4 in. high. Pentair has changed the finish from the original to black; the fit and part number are the same, so do not be surprised if the new clamp does not match the colour of the one coming off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplace the clamp if the band is corroded, bent or stretched, or if the barrel nut threads are damaged. A clamp that will not hold tension is a safety issue on a pressurised tank, so do not try to repair one.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624871735508,"sku":"PAC-051-1646","price":301.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a9783024-368f-4323-bc9c-61dc6d850e14.jpg?v=1788647699"},{"product_id":"tank-bottom-assembly-clean-clear-plus","title":"Pentair Genuine OEM Tank Bottom Assembly, Clean \u0026 Clear Plus, 178578","description":"\u003cp\u003ePentair part 178578 is the replacement tank bottom assembly for the Clean \u0026amp; Clear Plus cartridge filter and the Quad DE filter. It fits filters manufactured after 11-98 and is the genuine Pentair part, so it seals to the existing lid and clamp the way the original did.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lower tank takes the load of the plumbing and the pressure of the system. When it cracks, weeps at a port or has been damaged by a freeze, the rest of the filter is usually still good. Replacing the tank bottom keeps the lid, clamp, cartridges or grids and internals in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the manufacture date on your tank label. This bottom is for filters built after November 1998. The tank o-ring and clamp kit are sold separately, and a new o-ring is the right call any time the tank is split and reassembled.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624872423636,"sku":"PAC-051-1748","price":518.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1af2254a-277d-4447-a1cc-b68dec9a1aa7.png?v=1788647789"},{"product_id":"pentair-523100-ichlor-flow-switch","title":"Pentair iChlor Flow Switch, 523100","description":"\u003cp\u003ePentair part 523100 is the replacement flow switch for the iChlor salt chlorine generator. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003eThe flow switch is the safety that confirms water is moving through the cell. When it fails, sticks or fouls with debris, the iChlor reports no flow even with the pump running and stops producing chlorine. Replacing the switch restores the signal without replacing the cell.\u003c\/p\u003e\u003cp\u003eThis switch is specific to the iChlor. Pentair IntelliChlor systems use a different flow switch kit, so match the model before ordering. Shut off the pump and the power to the chlorinator before doing the swap.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624872751316,"sku":"PAC-451-3026","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_efe975da-2d70-4185-a602-fe6ff8a85c01.jpg?v=1788647839"},{"product_id":"1-5-valve-kit-multiport-side-mound-de-filters-sm10-2","title":"Pentair 1.5\" Multiport Valve Kit for Side Mount DE Filters, SM10-2, 261177","description":"\u003cp\u003eThe Pentair 261177 is the 1.5 in. side mount multiport valve kit, model SM10-2, for PacFab DE filters including the FNS, FNS Plus, Nautilus and Nautilus Plus. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix positions and a winter setting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle locks positively into each of six positions, and there is a separate winterizing position that leaves the valve open so trapped water can drain and freeze without damage. The body is PVC, which will not corrode on an outdoor pad, and the valve is rated for 50 PSI working pressure and 75 GPM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis valve mounts on the side of the filter with 7 1\/2 in. between port centers and 1.5 in. plumbing. If your filter is plumbed in 2 in., the SM20-2 is the matching 2 in. kit.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624873210068,"sku":"PAC-06-233","price":215.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dff6f29c-5a59-40da-a705-8dd4fdcc592c.jpg?v=1788647895"},{"product_id":"internal-bulkhead-assembly","title":"Pentair Genuine OEM 2 in. Triton II Bulkhead Kit, 154714Z","description":"\u003cp\u003eThe Pentair 154714Z is the genuine internal bulkhead assembly for the Triton II side mount sand filter. It is the fitting that passes through the tank wall and gives the multiport valve its 2 in. connection, so when it cracks or the seal gives up, water weeps at the side of the tank and no amount of tightening the valve union fixes it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTriton II models TR50, TR60, TR100 and TR140, and select Purex filters that used the same tank. You may see the part listed as 154714 without the Z; it is the same kit under Pentair's current number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDrain the tank below the port, remove the valve and back the old bulkhead nut off with a 2 in. bulkhead wrench. Seat the new assembly, tighten the nut evenly with the same wrench, then reconnect the valve. Pulling it with the wrench rather than pliers keeps the load square on the fiberglass tank.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624873341140,"sku":"PAC-051-5288","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8d8a56eb-547b-4c7a-ba8b-b76ed5c9a97e.jpg?v=1788647911"},{"product_id":"drive-cover","title":"Pentair SuperFlo VS Drive Cover, 353123","description":"\u003cp\u003eThe Pentair 353123 is the genuine drive cover for the SuperFlo VS variable speed pool pump. It sits over the drive on top of the motor and keeps dirt, dust, water and debris off the electronics underneath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSun and weather eventually crack or fade the original, and a cover that has gone missing leaves the drive open to the elements. The cover is the cheap part; the drive it protects is not. Replacing it as soon as it is damaged is the sensible order of operations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for the SuperFlo VS, the variable speed pump, not the single speed SuperFlo. Remove the old cover, set the new one in place and secure it. The drive, keypad and motor are not included.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624873406676,"sku":"PAC-101-1002","price":273.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5d26f510-4b13-4b82-b746-116d2d588974.jpg?v=1788647934"},{"product_id":"uoc-4aux-rplcmnt-eztch","title":"Pentair Genuine OEM Replacement UOC Motherboard, 4 Aux, EasyTouch, 520659","description":"\u003cp\u003eThe Pentair 520659 is the genuine UOC motherboard with four auxiliary circuits for EasyTouch pool and spa automation systems. It is the main board in the load center, the part that drives the relays, reads the sensors and runs every schedule and control function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is the fix\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA board that has taken a lightning surge or stopped responding takes the whole system down with it. Replacing the motherboard restores the panel without replacing the load center, relays or transformer, all of which carry over.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 4 aux board. Confirm your EasyTouch panel is the four auxiliary version; eight aux systems use a different motherboard.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624873734356,"sku":"COM-301-2870","price":583.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3f652171-0b89-4a41-abe2-3c2fce0da122.jpg?v=1788647963"},{"product_id":"lid-assembly-ccp-420-quad-80","title":"Pentair Genuine OEM Lid Assembly, CCP 420 \/ Quad 80, 178581","description":"\u003cp\u003eThis is the genuine Pentair tank lid assembly, part number 178581, for the Clean and Clear Plus 420 sq. ft. cartridge filter and the Quad DE 80 filter. It is the almond (tan) lid that matches the original tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lid that has cracked, chalked from sun exposure or been damaged during a cartridge change needs to be replaced rather than patched, since it carries system pressure. This assembly is the direct factory replacement, so it seats on the tank base and under the clamp exactly like the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your filter is a Clean and Clear Plus 420 or a Quad DE 80. The tank o-ring and the clamp kit are not included; if the o-ring is flattened or the clamp is corroded, replace them at the same time so the new lid seals properly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624874422484,"sku":"PAC-051-8581","price":341.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d8c72548-4578-46dd-99f2-e3fc8768e909.gif?v=1788648041"},{"product_id":"air-relief-valve-kit","title":"Pentair Genuine OEM High Flow Manual Air Relief Valve, 98209800","description":"\u003cp\u003eThis is the genuine Pentair high flow manual air relief valve assembly, part number 98209800, complete with the pressure gauge. It is the valve on top of the tank that you open to bleed air after a cartridge change or a restart, and the gauge next to it that tells you when the filter needs cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists it for the Clean and Clear, Clean and Clear Plus, FNS Plus and Quad DE filters and the EasyClean above-ground DE system. It also fits the American Products Eclipse side mount, Titan CM DE, Quantum CM, Quantum stainless steel, Quantum RPM and Predator filters, as well as American Products separation tanks. Pentair refers to it as the HFMARV, the High Flow Manual Air Relief Valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA gauge that reads zero with the pump running or sticks at one number, a valve that weeps when closed, or a cracked body are all reasons to swap the assembly. Because the gauge and valve come together, one kit restores both at once and the filter goes back to reading and bleeding correctly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624874684628,"sku":"AMP-051-4016","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cb732bb6-fdfc-41cb-bb19-fa1294408ddb.png?v=1788648073"},{"product_id":"lid-assembly-pacfab-2-top-side-mount-valve","title":"Pentair Lid Assembly, PacFab 2\" Top\/Side Mount Valve, 270067","description":"\u003cp\u003eThis is the genuine Pentair replacement lid assembly for the PacFab HiFlow 2 in. multiport valve, part 270067. It fits both the top mount 261055 and the side mount 261152.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve top assembly, a lid o-ring and two position labels, one for DE and one for sand, so the same kit serves either filter type. Apply the label that matches your filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid assembly replaces the top of the valve. The valve body stays plumbed in place, so the job is unbolting the old top, seating the new o-ring and bolting the new top down.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624875438292,"sku":"PAC-061-0067","price":225.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_107c0a48-adc8-4ee9-9f20-8579ccb3f894.jpg?v=1788648422"},{"product_id":"pentair-196090-easyclean-ec90-element-retro-kit","title":"Pentair EasyClean EC90 Element Retro Kit, 196090","description":"\u003cp\u003eThe Pentair 196090 is the element retro kit for the EasyClean EC90, Pentair's aboveground pool DE filter system. It is the genuine Pentair replacement element, supplied as a retrofit kit for the EC90 tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is specific to the EC90. The smaller EC60 uses a different quad style cartridge and is not covered by this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplace the element when cleaning no longer brings the filter pressure back to its clean reading, or when the element is torn or collapsed.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624875536596,"sku":"PAC-051-0181","price":190.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_88559920-645c-49f7-8a14-8625ecb20ce6.jpg?v=1788648430"},{"product_id":"superflo-pump-housing","title":"Pentair Superflo Pump Housing, Volute, 350089Z","description":"\u003cp\u003eThe Pentair 350089Z is the volute housing for SuperFlo and SuperFlo VS pool pumps, the main pump body that holds water around the impeller and directs it to the discharge. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA housing goes bad in a few predictable ways: a crack from freezing or a hard knock, a drain plug thread that no longer seals, or a union thread that has been stripped by overtightening. Any of those means a leak and a pump that struggles to hold prime. If the motor, seal plate and impeller are still good, swapping the housing is a far cheaper repair than a new pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the housing only. The seal plate, impeller, diffuser, motor and fasteners carry over from your existing pump, so it is a good moment to inspect the shaft seal and diffuser o-ring and replace them if they are worn.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624875765972,"sku":"PAC-101-0089","price":265.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dd02e2d9-c8ed-4c40-b79f-77a35e843cd9.jpg?v=1788648463"},{"product_id":"pentair-522386-intelliph-oem-pump-repair-kit","title":"Pentair IntellipH OEM Pump Repair Kit, 522386","description":"\u003cp\u003eThe Pentair 522386 is the genuine repair kit for the tank mounted OEM pump on IntellipH pH controllers. It services the pump that is already on your controller rather than replacing the whole pump assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn IntellipH pump that is leaking, dosing inconsistently or no longer moving chemical usually needs its wear parts renewed rather than a new pump. This kit is Pentair's answer for the tank mounted version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your IntellipH uses the tank mounted OEM pump, the one that sits on the controller tank. If your pump is a different style or mounted elsewhere, check its part number first.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624877371604,"sku":"PAC-451-2386","price":117.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PAC-451-2386_1a.png?v=1788648529"},{"product_id":"pentair-152237-2-ta60-standpipe-assembly","title":"Pentair 2\" TA60 Standpipe Assembly, 152237","description":"\u003cp\u003eThe Pentair 152237 is the 2 in. standpipe and piping assembly with hub for the Tagelus TA60 sand filter. It is the genuine Pentair replacement for the filter's internal piping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside a sand filter, water passes down through the sand bed, is collected by the laterals at the bottom, and travels back up the standpipe to the valve. If the standpipe or hub cracks, sand gets past it and shows up in the pool. Replacing the assembly is the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlanning the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe standpipe runs the full height of the tank with the hub at the base, so replacing it means removing the sand. Since the media has to come out anyway, most owners take the opportunity to install fresh sand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis assembly is for the TA60 with 2 in. plumbing. Pentair lists a separate piping assembly with hub for the TA60D, so check the model number on your filter tank.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624878059732,"sku":"PAC-051-1300","price":110.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_aed03719-ff5e-4790-87f3-328cf16fb595.jpg?v=1788648595"},{"product_id":"top-valve-assembly-hi-flow-1-1-2","title":"Pentair Genuine OEM 1.5\" HiFlow Valve Top Assembly, 272531","description":"\u003cp\u003eThe Pentair 272531 is the top assembly for the PacFab 1.5 in. HiFlow six way multiport valve, complete with the diverter and its gasket. Those are the parts that take the wear every time the handle is moved, and replacing them as a set is the usual fix when a HiFlow valve starts leaking to waste or refuses to hold pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe HiFlow valve is the one fitted to the Pentair PacFab Sand Dollar SD35, SD40 and SD60 sand filters, and this top is also listed for the 261124, 261130 and 262506 top mount 1.5 in. valves. Confirm your valve is the 1.5 in. HiFlow before ordering; the 2 in. valves use different parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is and is not in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYou get the valve top, diverter and gasket. The handle, the valve top o-ring and the pressure gauge are separate parts. Since the valve is apart for this job anyway, it is worth checking the top o-ring at the same time.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624880255188,"sku":"PAC-051-1776","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f9a2c566-36ab-4cbe-9a93-2f537ddf4f37.png?v=1788648863"},{"product_id":"pentair-272568z-valve-top-assembly-for-sta-rite-6-position-top-mount-clamp-on-multiport-valve","title":"Pentair 6-Position Top Mount Clamp Valve Top Assembly, 272568Z","description":"\u003cp\u003eThe Pentair 272568Z is the valve top assembly for the Sta-Rite 263085 six position top mount clamp-on multiport valve. When a multiport valve leaks or will not hold its position, the wear is almost always in the top, and this assembly replaces that section while the valve body stays on the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made for the clamp-on style of the six position top mount valve, model 263085. Check that your valve is the clamp-on version before ordering, because the threaded and bolted top mount valves take different tops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish the job properly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve body o-ring, the sight glass and the drain plug o-ring are separate parts. The body o-ring in particular should be replaced any time the top is removed, so order it alongside the top if yours has been in service for a while.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624880386260,"sku":"PAC-051-3071","price":151.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_117cd2c8-a69c-48fb-8898-1307fc07cd55.jpg?v=1788648880"},{"product_id":"lateral-assembly-tr140","title":"Pentair Genuine OEM Lateral Assembly TR140, 154540","description":"\u003cp\u003eThe Pentair 154540 is the 12 in. lateral for the Triton II TR140 sand filter. Laterals are the slotted arms at the bottom of the tank that let filtered water out while holding the sand bed back. This is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment and quantity\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the Triton II TR140 and the commercial TR140C. The hub takes eight laterals, and this listing is for one, so a full replacement is eight pieces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSand in the pool after a backwash is the classic sign of a cracked lateral. Replacing laterals means removing the sand, so it is worth inspecting all eight and changing any that are cracked or brittle while the tank is empty, then reloading with fresh sand.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624881402068,"sku":"PAC-051-2836","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a76d6a74-de57-4f33-b0a9-8a92ed745634.png?v=1788649325"},{"product_id":"superflo-vst-drive-test","title":"Pentair SuperFlo VST Motor Drive Kit, 356282","description":"\u003cp\u003eThe Pentair 356282 is the motor drive kit for the SuperFlo VST variable speed pool pump. The drive is the electronics package on the motor that sets and holds pump speed. It is a genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA SuperFlo VST that will not hold its programmed speeds, throws drive faults or will not power up may have a failed drive. Replacing the drive alone keeps the motor and wet end in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck part number 356282 against the parts list for your pump. The kit does not include the motor.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624881533140,"sku":"PAC-101-0034","price":790.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3ad28aef-e552-48ef-8361-7b21744bf046.png?v=1788649337"},{"product_id":"2-top-mount-clamp-on-complete-valve","title":"Pentair 2\" Top Mount, Clamp on Complete Valve, 261185","description":"\u003cp\u003eThe Pentair 261185 is the complete 2 in. top mount multiport valve for Tagelus TA sand filters. It clamps onto the 8.35 in. tank flange and gives the filter its six positions plus a dedicated winterizing position on a positive lock diverter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterials that last outdoors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is corrosion resistant PVC and the diverter is heavy duty Noryl. The handle is one large piece, so there is no separate knob or pin to loosen over the seasons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 2 in. valve. Confirm your Tagelus is plumbed in 2 in. pipe and that the tank flange measures 8.35 in. across. If the old valve clamp is corroded, replace it at the same time with the matching 8.35 in. Pentair clamp.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624882843860,"sku":"PAC-06-254","price":322.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_28cbf28d-9aca-4c6a-a722-04b44fccaf5a.jpg?v=1788649436"},{"product_id":"manifold-top-w-air-bleed","title":"Pentair Manifold Top with Air Bleed for FNS Plus D.E. Filter\/RPM Titan \u0026 Nautilus Filters, 59023700","description":"\u003cp\u003eThe Pentair 59023700 is the top manifold with air bleed for FNS Plus D.E. filters, and it also fits Titan RPM and Nautilus filters. It sits at the top of the grid stack and carries the air bleed that lets trapped air escape from the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTop manifold, not the full assembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part is the top manifold itself. The complete FNS Plus top manifold assembly is a separate part number. If you only need the top piece, this is the one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the tank is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLook over the internal air bleed assembly, the grids and the tank o-ring before you close up. It is a genuine Pentair part.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624882942164,"sku":"AMP-051-1253","price":144.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b15338e3-9e47-465c-adf6-f6a0eca58a91.jpg?v=1788649449"},{"product_id":"pentair-521218-load-center-intellichlor-scg-surge-board-pcba","title":"Pentair Genuine OEM Load Center IntelliChlor SCG Surge Board PCBA, 521218","description":"\u003cp\u003eThe Pentair 521218 is the SCG surge board PCBA for the IntelliChlor i5+3 new style load center in EasyTouch PL4 and PSL4 control systems. It is the board that runs the IntelliChlor salt chlorine generator from the load center, with a surge board that shields that circuit from electrical spikes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew style, not old\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair released this board as the upgrade from the earlier load center version, with improved performance and durability. Confirm your load center is the i5+3 new style before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does not include\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the board only. The load center transformer and any personality card are separate parts. It is a genuine Pentair part.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624883138772,"sku":"COM-30-1218","price":312.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/COM-30-1218.png?v=1788649475"},{"product_id":"pentair-357527z-keypad-assembly-kit-with-keypad-cover-almond","title":"Pentair IntelliFlo Keypad Cover Kit, Almond, 357527Z","description":"\u003cp\u003eThe Pentair 357527Z is the keypad assembly kit with top cover for IntelliFlo variable speed pumps, in almond. It is the genuine Pentair part: the keypad itself together with the cover that protects it on the front of the drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplace the kit when buttons stop responding, when the cover has cracked or faded in the sun, or when the keypad has taken water. Because the keypad ships assembled with its cover, the swap is a straight exchange rather than a rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your pump is an IntelliFlo and that almond is the finish you need. If you want the controls mounted away from the pump, Pentair offers a separate keypad relocation kit.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624883564756,"sku":"PUR-101-3255","price":326.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5ea1e35c-e56d-4d81-9b8c-77c17bc07b15.jpg?v=1788649516"},{"product_id":"flange-6-w-gaskets-ss-hardware","title":"Pentair Flange 6\" with Gaskets and SS Hardware, 357263","description":"\u003cp\u003eThe Pentair 357263 is the 6 in. flange assembly kit for Pentair commercial pumps, supplied with the gaskets and stainless steel hardware needed to make up the connection. It fits the EQ Series, C-Series and Aurora commercial pump lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEverything for the joint\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe flange, its gaskets and the stainless fasteners come together, so a repipe or a pump swap does not stall waiting on a separate gasket or bolt order. Stainless hardware holds up in a damp equipment room where plated steel would rust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 6 in. kit. Pentair also offers the 4 in. kit as part 357262 and the 3 in. kit as part 357261 for pumps with smaller connections.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624883630292,"sku":"PUR-101-7263","price":250.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d04290a1-a4ee-46b0-881c-db045825aa3e.jpg?v=1788649525"},{"product_id":"drive-cover-kit","title":"Pentair Drive with Cover Kit for SuperFlo VS Pump, 353127","description":"\u003cp\u003eThe Pentair 353127 is the drive and cover kit for the SuperFlo VS variable speed pump. The drive is the electronics package that controls motor speed and holds the schedule, and it is sold together with its cover as one assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA SuperFlo VS with a failed drive will fault out or stop responding to its controls even though the motor and the wet end are fine. Swapping the drive puts the pump back in service without buying a whole new pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe drive and the cover. The motor, seal and wet end parts are separate, as is the SuperFlo VS pump itself.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624884580564,"sku":"PAC-101-3100","price":743.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_533eb903-e270-4913-8cc0-a2072ed14c5b.jpg?v=1788649646"},{"product_id":"communication-cable-with-swivel-for-prowler-920-aboveground-pool-cleaner","title":"Pentair Communication Cable with Swivel for Prowler 920 Aboveground Pool Cleaner, 360499","description":"\u003cp\u003eThe Pentair 360499 is the communication cable with swivel for the Kreepy Krauly Prowler 920 aboveground robotic pool cleaner. It is the genuine Pentair replacement, supplied as the cable and swivel together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cable is the part of a robot that takes the most abuse: it is coiled and uncoiled every session, pulled across the deck and left out in the sun. The swivel on this assembly is what lets the cable unwind itself as the cleaner turns, so when the swivel wears or the cable jacket cracks, this is the part to replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your cleaner is the Prowler 920 aboveground model. The cable is sold on its own; the power supply is not included.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624885235924,"sku":"KPY-201-0535","price":257.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_430136da-80b5-4df8-b13a-a4d235995359.jpg?v=1788649744"},{"product_id":"oem-tank-o-ring-20-7-8-id-7-16-thick","title":"Pentair OEM Tank O-Ring 20-7\/8\" ID (7\/16\" Thick), 39010200Z","description":"\u003cp\u003eThe Pentair 39010200Z is the genuine tank o-ring for the Clean and Clear Plus cartridge filters, the Nautilus FNS Plus DE filters and the American Products RPM filters, both the Titan RPM DE and the Quantum RPM cartridge. It measures 20-7\/8 in. across the inside with a 7\/16 in. cross section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring sits in the joint between the two tank halves under the clamp. Every time the tank is opened to clean cartridges or grids, that seal is disturbed, and an o-ring that has flattened, cracked or stretched will weep at the seam once the system is back under pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the old ring if you can: 20-7\/8 in. inside diameter and 7\/16 in. thick. This is the OEM Pentair part; a generic in the same size is also available if you would rather not pay for the name.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624885268692,"sku":"AMP-051-1068","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b7a18c28-cbf0-445c-980e-e1d38168a5c5.gif?v=1788649758"},{"product_id":"pentair-521604-control-panel-board-assembly-for-suntouch-and-solartouch-control-system","title":"Pentair Genuine OEM Control Panel Board Assembly for SunTouch and SolarTouch Control System, 521604","description":"\u003cp\u003eThe Pentair 521604 is the genuine control panel board assembly for the SunTouch and SolarTouch control systems. It is the OEM Pentair part, supplied as the complete board assembly for the control panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists this one board for both SunTouch and SolarTouch. Confirm your system is one of the two before ordering; it is the panel board, not the complete panel or the power center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKill power to the system at the breaker before opening the enclosure. Note or photograph where each connector plugs in on the old board, move them across one at a time, and restore power only once the enclosure is closed back up.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624885301460,"sku":"COM-301-0217","price":262.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/COM-301-0217_1a.png?v=1788649763"},{"product_id":"pentair-mastertemp-461031-heater-direct-air-intake-duct-kit","title":"Pentair MasterTemp Heater Direct Air Intake Duct Kit, 461031","description":"\u003cp\u003eThe Pentair 461031 Direct Air Intake Duct Kit is the combustion air intake for a MasterTemp heater installed indoors. Rather than letting the heater breathe the air in the equipment room, the kit ducts outside air straight to the burner through a 3 in. PVC pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVertical or horizontal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 3 in. intake can be run vertically through a roof or horizontally through a wall, so it fits most equipment room layouts. It is PVC pipe on the intake side, not metal flue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does not cover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is for the air going in. The exhaust vent and the appliance adapter that connects the heater to its flue are separate parts, so plan the exhaust run alongside this kit when you lay out an indoor install.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624885432532,"sku":"PUR-151-1031","price":245.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0ebd462b-6053-4400-bdf2-fab348763ae2.jpg?v=1788649851"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/pentair-parts.oembed?page=9","provider":"Active Pool Supply","version":"1.0","type":"link"}