{"title":"Perma-Cast","description":"\u003cp\u003ePerma-Cast pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"ladder-johnny-hinge-set-perma-cast","title":"Perma-Cast Johnny Pool Ladder Hinge, Set of 2","description":"\u003cp\u003eThe Perma-Cast JH-0019-B Johnny Hinge Set is a pair of bronze hinges that convert a fixed pool ladder into one that pivots. Instead of lifting the ladder out of its sockets at the end of the season, you swing it up out of the water and leave it there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy bronze\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA ladder anchor sits at the wet edge of the pool, splashed with chlorinated water and never really dry. The hinges are corrosion resistant bronze for that reason, which is the same reason Perma-Cast anchor hardware is made the way it is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe set accommodates 1.9 in outside diameter tubing, the standard rail size on most pool ladders, and mounts into all standard anchor sockets. That means no coring, no new escutcheons and no deck repair: the hinges go into the anchors already set in your deck.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48626281677012,"sku":"PER-35-900","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6eead9d0-4f6d-47ac-9d9f-0c36848b4515.jpg?v=1788707605"},{"product_id":"1-9-escutcheon-stainless-steel","title":"Perma-Cast 1.9\" Escutcheon, Stainless Steel","description":"\u003cp\u003eThe Perma-Cast PE-0019-S is a round stainless steel escutcheon for 1.9 inch diameter pool ladder and handrail tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn escutcheon is the collar that sits on the deck where a rail goes into its anchor. It covers the anchor socket and the gap around the tube, which is both a tidiness problem and a place for grit and water to sit. Stainless keeps its appearance beside a stainless rail rather than fading or yellowing the way a plastic cover does.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOutside diameter is 4-9\/16 inches, inside diameter is 2 inches and the height is 5\/8 inch, so it clears 1.9 inch tubing and sits low enough not to be a trip point. Order one for each rail leg that meets the deck.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48626359894228,"sku":"PER-35-729","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_66844984-5631-4c5f-9358-25f88d170289.jpg?v=1788709249"},{"product_id":"1-mpt-bronze-poolbond-water-bonding-fitting","title":"Perma-Cast 1\" MPT Bronze PoolBond Water Bonding Fitting","description":"\u003cp\u003eThe Perma-Cast PB-2008 is a bronze PoolBond water bonding fitting with a 1 inch male pipe thread. It gives the pool water a deliberate electrical connection that can then be tied back to the bonding grid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is required\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 2008 National Electrical Code calls for an intentional electrical bond to be made to the pool water, and that contact has to be connected to the swimming pool bonding grid. PoolBond fittings were made to satisfy that requirement without a complicated or expensive install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is bronze, a non-ferrous casting. Perma-Cast, based in Export, Pennsylvania, was founded in 1988 and builds permanent mold castings for the pool trade. The PB-2008 threads into a 1 inch female port, so it can go into the plumbing wherever the design calls for the bond to be made.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48626743017684,"sku":"PER-57-1000","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6fe4ceb3-5d34-45c6-b2de-73e6c6cf2d2c.jpg?v=1788714239"},{"product_id":"perma-cast-pc-4008-bc-4-bronze-deck-anchor-channel-set-with-8-center","title":"Perma-Cast 4 in. Bronze Deck Anchor Channel Set with 8 in. Center","description":"\u003cp\u003eThe Perma-Cast PC-4008-BC is a bronze deck anchor channel set, the 4 in. size on an 8 in. center. It is the genuine Perma-Cast part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial and size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePerma-Cast builds its deck anchor channels in more than one material and more than one spacing. This part is the bronze version; the plastic and aluminum channels are separate part numbers, as are the channels supplied with a Hanover socket. The two figures that matter when you order are the 4 in. channel size and the 8 in. center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the center spacing on the deck you are working with. An 8 in. center and a 20 in. center are not substitutes for each other, so match the spacing rather than the material first. This listing is supplied as a set.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48626980946132,"sku":"PER-35-768","price":91.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8d542b44-1dfc-4475-9997-763e9bb02778.jpg?v=1788718703"},{"product_id":"anchor-cover-brass-two-piece-with-screw","title":"Perma-Cast Brass Two Piece Anchor Cover with Screw","description":"\u003cp\u003eThe Perma-Cast PE-8 is a two piece brass anchor cover with its retaining screw. It caps a deck anchor socket, which is what you want when the handrail or ladder comes out for the winter and you are left with an open hole in the concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo pieces, on purpose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA one piece cover has to drop over the anchor from above. A two piece cover assembles around it, so it can go on with hardware already in place and comes off again without a fight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePerma-Cast lists the PE-8 for eight anchors in the PS-3019 and PS-4019 series. Those part numbers are set out in the specifications above. Anchors from other makers use their own covers and are not interchangeable with this one.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48627627884756,"sku":"PER-35-808","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_29e53af7-f8d6-4a05-8bd8-24a866c71c85.png?v=1788725535"},{"product_id":"perma-cast-tn-il-20-2-inline-anode","title":"Perma-Cast 2\" Inline Anode","description":"\u003cp\u003eThe Perma-Cast TN-IL-20 is a 2 inch inline sacrificial anode carrying 53 square inches of zinc inside a clear PVC housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a sacrificial anode does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePut dissimilar metals in the same body of water and the more reactive one gives up material to protect the rest. A zinc anode is deliberately the most reactive metal in the system, so it corrodes first and the heater core, the metal filter parts and the rest of the plumbing metal do not. The anode is meant to be consumed, and replacing it is the whole point of fitting one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it installs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe TN-IL-20 goes inline in the plumbing and connects directly to the metal filter or heater core it protects. The housing is clear PVC, so you can see how much zinc is left without breaking into the line. A weatherproof installation sticker is included to record the install and the service date on the equipment.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48627702923476,"sku":"PER-351-1001","price":118.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d450ea78-7ce5-46fe-b03f-8dfb4ed19767.png?v=1788726785"},{"product_id":"perma-cast-ps-4019-bc-4-hanover-clone-perma-socket-anchor-for-1-9-od-tubing-rails","title":"Perma-Cast 4\" Hanover Clone Perma Socket Anchor for 1.9\" OD Tubing Rails","description":"\u003cp\u003ePerma-Cast PS-4019-BC is a 4 inch deep bronze anchor socket, a Hanover clone Perma Socket, made for rail tubing with a 1.9 inch outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the anchor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe socket sets into the deck and the rail drops into it. A wedge inside the socket is tightened down by the bolt, and it presses out against the tube so the rail cannot lift or rotate. Everything the rail does under load is carried by this one piece of hardware, which is why bronze is still the standard for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEverything for the install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wedge, washer and bolt come with the socket, and it uses the PW wedge. A bonding screw is also supplied so the anchor can be tied into the pool bonding grid during installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo things to check: that your rail is 1.9 inch outside diameter, and that the pocket in the deck will accept the full 4 inch socket depth.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48627982762196,"sku":"PER-35-798","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_672f825f-118b-4321-8dbd-dacc33908095.jpg?v=1788732310"},{"product_id":"perma-cast-pc-4020-bc-4-bronze-deck-anchor-channel-with-20-center-and-hanover-socket","title":"Perma-Cast 4\" Bronze Deck Anchor Channel with 20\" Center and Hanover Socket","description":"\u003cp\u003eThe Perma-Cast PC-4020-BC is a 4 in. bronze deck anchor channel with 20 in. center spacing, supplied with the Hanover socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a channel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn anchor channel carries both sockets on one casting instead of setting each socket independently. The 20 inch spacing is fixed by the channel itself, so the two points cannot drift out of alignment during the pour and whatever bolts into them lands square.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBronze and socket type\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the bronze version. Perma-Cast lists the same 20 in. center layout in aluminum and lists an 8 in. center channel in both bronze and plastic, so the material and the spacing are both part of the part number. Quote PC-4020-BC in full when ordering, and confirm the socket on your equipment is the Hanover style before you set anything in concrete.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48628797767892,"sku":"PER-35-711","price":125.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1488a1ac-17de-417a-a181-2cc0d206365d.jpg?v=1788750801"},{"product_id":"perma-cast-ps-6019-bc-bronze-big-boy-socket-anchor-for-1-9-inch-od-tubing-rails","title":"Perma-Cast Bronze Big Boy Socket Anchor for 1.9 Inch OD Tubing Rails","description":"\u003cp\u003eThe Perma-Cast PS-6019-BC is the bronze Big Boy socket anchor for 1.9 in. OD tubing rails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the anchor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe socket anchor is the part set into the deck. The rail drops into it and is held by the wedge, so the anchor carries every load the rail sees. When one corrodes through or works loose, the rail is no longer safe to lean on and the anchor has to be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing and material\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt takes 1.9 in. outside diameter tubing, the common rail size. It is cast in bronze. The anchor is sold on its own, so the rail and the escutcheon plate are ordered separately.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48628831551700,"sku":"PER-35-737","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a034ad73-0ca3-4153-8ed8-6e0a3a367caf.jpg?v=1788753625"},{"product_id":"perma-cast-pi-74-concrete-bronze-chrome-plated-rope-eye-with-lead-sleeve","title":"Perma-Cast PI-74 Concrete Bronze Chrome Plated Rope Eye with Lead Sleeve","description":"\u003cp\u003eThe Perma-Cast PI-74 is a chrome plated bronze rope eye supplied with a lead sleeve, made for anchoring a safety rope on a concrete pool deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA floating safety rope needs a solid point at each side of the pool. The rope eye is that point. The lead sleeve sits in the concrete and the bronze eye threads into it, so the eye itself can be taken out at the end of the season or replaced later without disturbing the anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRope eyes are not interchangeable across deck types. This one is the concrete version. If your pool is a vinyl liner build, the anchor is different, so confirm what is currently in the deck before ordering. Bronze with a chrome finish is the usual choice here because it survives pool chemistry far longer than plated steel.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48629533442260,"sku":"PER-35-793","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ca7eb2ad-f2da-432e-98ad-f63fb3fb30ad.png?v=1788766095"},{"product_id":"permacast-pf-25-a-slide-flange-with-mounting-hardware-for-1-9-inch-od-tubing-rails-cycolac-plastic-white","title":"Perma-Cast PF-25-A Slide Flange with Mounting Hardware for 1.9 Inch OD Tubing Rails, Cycolac Plastic, White","description":"\u003cp\u003eThe Perma-Cast PF-25-A is a slide flange for 1.9 inch OD tubing rails, molded in white Cycolac plastic and supplied with its mounting hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA handrail or ladder rail drops into an anchor socket set in the deck. The slide flange rides down the rail to cover that socket, hiding the anchor and finishing the joint where the rail meets the concrete. It is the part that makes an installation look finished rather than improvised, and the part most likely to be broken or missing on a pool that has had rails removed for winter a few times.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis flange is for 1.9 inch outside diameter tubing. That is the common size on pool handrails and ladders, but 1.5 inch OD rail exists too and needs a different flange, so measure across the tube before ordering. Cycolac plastic was chosen for a reason here: the deck edge stays wet and chlorinated, and plastic does not corrode there the way metal does.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48633645236436,"sku":"PER-35-810","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c8a8d69f-b120-45fb-a077-33caa04074f9.jpg?v=1788808226"},{"product_id":"perma-cast-ps-4019-p-4-plastic-deep-bronze-anchor-socket-for-1-9-od-tubing","title":"Perma-Cast 4\" Plastic Deep Bronze Anchor Socket for 1.9\" OD Tubing","description":"\u003cp\u003eThe Perma-Cast PS-4019-P is a Perma Socket anchor molded in Cycolac plastic, 4 inches deep and finished in deep bronze. It takes rails built from 1.9 inch outside diameter tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anchor works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe socket is set into the deck and the rail drops into it. A PW-P wedge assembly then expands inside the socket to lock the rail so it cannot lift or rotate. The wedge is a separate part, so order one with the socket if the old wedge is corroded or stripped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlastic instead of metal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA deck pocket holds water. Metal sockets corrode there and eventually seize a rail in place or crack the surrounding concrete. The Cycolac body avoids that failure mode while keeping the same fit as the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck before ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo things matter: the tubing must be 1.9 inch OD, and the pocket must accept a 4 inch deep socket. Perma-Cast lists shallower sockets for decks that cannot take the depth.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48633703399636,"sku":"PER-35-4019","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_275e1f2f-b483-4295-9a28-4f9a05bd8fd9.png?v=1788812061"},{"product_id":"1-5-escutcheon-stainless-steel","title":"Perma-Cast 1.5\" Escutcheon, Stainless Steel","description":"\u003cp\u003eThis is the Perma-Cast PE-0015-S, a round stainless steel escutcheon for pool ladder and hand rail tubing with a 1.5\" diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe escutcheon rides at deck level, right where the rail drops into its anchor socket. It covers the gap around the tube so leaves, grit and water do not collect down in the anchor, and it gives the joint a finished edge rather than a raw hole in the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 1.5\" figure is the rail diameter, not the anchor size. Measure across the tube before ordering, since rail stock comes in more than one diameter and an escutcheon sized for the wrong tube will either bind or sit loose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCount your anchors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is a single escutcheon. A hand rail or a two leg ladder takes one per deck anchor, so work out how many you need before ordering. They are inexpensive, and replacing a matched set at once looks better than swapping one at a time.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48633714507988,"sku":"PER-35-736","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_13e8d79c-d3c6-41b2-b5bf-cf4436a10531.jpg?v=1788812394"},{"product_id":"ladder-flange-white-perma-cast","title":"Perma-Cast Aluminum Ladder Flange 1.5\" OD Tubing, White","description":"\u003cp\u003eThe Perma-Cast PF-2115-L is a deck mounted round flange for 1.5 in. outside diameter ladder or rail tubing. The body is white powder coated aluminum and it comes with a stainless steel bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShape and size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe flange is round, with a flat mounting flange at the bottom carrying three holes spaced 2-5\/16 in. center to center. It measures 3-3\/8 in. across the bottom flange, 1-3\/8 in. across the top, 1-9\/16 in. inside diameter at the top opening, and stands 2-3\/8 in. tall. A threaded hole in the body takes the bolt that clamps the tube, with the center of that hole 5\/8 in. down from the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAlmost always with above ground equipment. Measure the tube before you order: this flange is built around 1.5 in. OD tubing, and a rail that measures anything else will not seat properly no matter how hard the bolt is driven.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48633785549012,"sku":"PER-35-721","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_57e7eb29-ece5-44c7-b885-44fc7b9603a5.jpg?v=1788816390"},{"product_id":"perma-cast-tn-il-technode-in-line-anode-for-metal-filter-or-heater-core-1-5-2-pipe-24sq-inch-zinc","title":"Perma-Cast Technode In-Line Anode for Metal Filter or Heater Core","description":"\u003cp\u003eThe Perma-Cast TN-IL Technode is an in-line sacrificial anode with 24 square inches of zinc, housed in clear PVC and sized for 1.5 to 2 inch pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhere dissimilar metals share pool water, the least noble metal corrodes first. An anode gives the system a piece of zinc to attack instead of the heater core or metal filter parts. This model connects directly to the metal filter or heater core it is protecting, which puts the zinc in the same electrical path as the metal that matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInspection and service\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing is clear, so the anode can be looked at without cutting into the plumbing or breaking a union. A weatherproof sticker is included to record the installation date on the pad. An anode only works while there is zinc left to give up, so build the check into your normal equipment inspection.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48634167197908,"sku":"PER-45-1000","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_330c6c70-fdb9-46f7-9266-7b275c702f15.jpg?v=1788826106"},{"product_id":"permacast-tn-ld-technode-ladder-anode-for-1-9-inch-ladder-rail-27-sq-inch-zinc","title":"Perma-Cast Technode Ladder Anode for 1.9 in. Ladder Rail","description":"\u003cp\u003eThe Perma-Cast TN-LD Technode is a sacrificial zinc ladder anode with 27 square inches of zinc, sized to fit any 1.9 in. pool ladder rail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a pool needs an anode\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePool water carrying salt and sanitizer is an electrolyte, and metal in contact with it corrodes. A sacrificial anode gives that corrosion somewhere better to go. Zinc sits lower on the galvanic scale than the stainless and other metals in a pool, so it gives itself up first and the ladder, the rails and the fittings are spared while it lasts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and checking it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Technode mounts at the ladder and Perma-Cast lists it as accommodating any 1.9 in. ladder rail, which is the common rail size. Once it is in, treat it as an inspection item. An anode that is disappearing is doing exactly what it was bought for, and it needs replacing once most of the zinc is gone. Perma-Cast also builds inline anodes for the plumbing and anodes for a metal filter or heater core, and larger installations often run more than one.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48634421903572,"sku":"PER-351-1000","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6466def7-f9bf-471b-90f1-316237921a86.png?v=1788830279"},{"product_id":"25mpt-pump-mount-water-bonding-fitting","title":"Perma-Cast 1\/4\" Above Ground Pool Pump Bonding Kit PB-AG","description":"\u003cp\u003eThe Perma-Cast PB-AG is a water bonding fitting for above ground pool pumps. It threads into the 1\/4 inch drain plug port on the pump strainer pot, under the strainer basket, so the fitting sits directly in the water passing through the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy pool water gets bonded\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe National Electrical Code requires the pool water itself to be bonded, not only the metal parts around it. Section 680.26(C) sets that requirement, and a fitting like this is the usual way to meet it on an above ground pool where there is no bonded metal shell in contact with the water. This fitting presents 10.5 square inches of surface area to the water and is UL Listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt goes in the drain plug opening of the strainer pot, which makes it a straightforward retrofit on an existing pump rather than a plumbing change. Bonding and electrical work at a pool should be done to code, so have an electrician confirm the connection if you are not sure of the existing bond.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48634477478100,"sku":"PER-57-2000","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PB-AG.jpg?v=1788832063"},{"product_id":"permacast-tn-100-technode-in-line-anode-for-tee-24-sq-inch-zinc","title":"Perma-Cast TN-100 Technode In-Line Anode for Tee, 24 Square Inch Zinc","description":"\u003cp\u003eThe Perma-Cast TN-100 Technode is an in-line sacrificial anode that installs at a tee in the pool plumbing. It carries 24 square inches of zinc inside a clear PVC housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a pool needs an anode\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater, dissolved salts and dissimilar metals make a battery. Left alone, that galvanic action eats at heat exchangers, ladder anchors, light rings and any other metal in the system. A zinc anode gives the reaction something easier to consume, so the zinc wastes away and the expensive metal does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe clear housing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnodes only work while there is anode left, which is exactly the thing most owners never check. The Technode housing is clear PVC, so the remaining zinc can be seen from the equipment pad without breaking into the plumbing. A weatherproof installation sticker is supplied to record the date and keep the service interval honest.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the in-line version, made to sit in a tee in the pipe run. Perma-Cast also builds a Technode that fits a metal filter or heater core, so pick the one that matches where you want the protection.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48634533478612,"sku":"PER-45-1001","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3ca68948-9845-42a8-9038-45f9cedb1f44.png?v=1788833988"},{"product_id":"permacast-pw-3c-hanover-no-30-wedge-assembly-with-washer-and-1-1-2-inch-bolt","title":"Perma-Cast Hanover No. 30 Wedge Assembly with Washer and 1-1\/2\" Bolt","description":"\u003cp\u003eThe Perma-Cast PW-3C is the wedge assembly for the Hanover No. 30 anchor socket. It is supplied complete with the washer and the 1-1\/2 inch bolt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anchor works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA deck anchor is a hollow socket cast or drilled into the concrete. The rail or ladder leg drops into it, and a wedge sitting in the socket is drawn upward by a bolt through the escutcheon. As the wedge rises it is pushed outward, pinching the leg against the socket wall so the rail cannot lift or twist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything about that joint sits in wet, chlorinated air. The bolt is what usually goes, seizing or stretching until it no longer draws the wedge tight, and the rail starts to move under load. Replacing the wedge, washer and bolt together restores a solid rail without touching the concrete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIdentify the socket first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePerma-Cast makes several wedge assemblies for different socket patterns. This one is the Hanover No. 30. If yours is a different socket, the wedge will not seat correctly and the rail will stay loose.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48634812956884,"sku":"PER-35-795","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a6a787ba-b9e7-4281-a2c4-52653dcae35e.png?v=1788837771"},{"product_id":"perma-cast-ps-3019-wb-3-west-coast-special-perma-socket-anchor-for-1-9-od-tubing-rails","title":"Perma-Cast 3\" Bronze Rail Anchor 1.90\" OD | PS-3019-WB","description":"Sold Individually, Recommended for Rails \u0026amp; Ladders, Included wedge, washer, bolt and 1\/4-20 UNC grounding screw\u003cbr\u003e\u003cbr\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48648910242004,"sku":"PER-35-782","price":54.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/74416_1_2010419102452.jpg?v=1789059532"},{"product_id":"permacast-ps-60-cap-flush-mount-cap-for-6-inch-big-boy-game-cup","title":"Perma-Cast Perma Cast Flush Mount Cap | PS-60-CAP","description":"\u003cp\u003ePerma-Cast Perma Cast Flush Mount Cap. OEM part number PS-60-CAP.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48649021948116,"sku":"PER-351-0060","price":25.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/51107_0_201911781022.jpg?v=1789059973"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/perma-cast.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}