{"title":"Plumbing Fittings","description":"\u003cp\u003eShop plumbing fittings at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"combo-hose-adapter","title":"Hayward 1-1\/2\" Combo Hose Adapter for Filters, Pumps, Skimmers and Chlorine Feeders (2 Pack)","description":"\u003cp\u003eThe Hayward SPX1091Z7 combo hose adapter is the fitting that connects flexible hose to the threaded ports on Hayward above ground filters, pumps, skimmers and chlorine feeders. One end is a 1-1\/2 in. male thread; the other is a smooth, stepped barb that accepts either 1-1\/4 in. or 1-1\/2 in. hose. This is a two pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne adapter, two hose sizes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe barb is stepped rather than a single diameter. Smaller 1-1\/4 in. hose seats on the first step and 1-1\/2 in. hose pushes on to the second, so the same part works whichever hose your system uses. Secure it with a hose clamp; a double wire clamp grips a smooth barb better than a single band.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine Hayward\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe adapter is molded with SP1091Z7 stamped into the plastic, which makes it easy to confirm you are replacing like with like. It is listed as a replacement part for the Sand Master SM1700T, SM1900T and SM2300T sand filters and fits any Hayward equipment with a 1-1\/2 in. threaded port.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624922525908,"sku":"HAY-25-1531","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0066af2-8710-430b-bd9d-586d30cb8ef3.jpg?v=1788653641"},{"product_id":"face-plate-screws-eyeball","title":"Sta-Rite Face Plate Inlet Eyeball Kit with Screws","description":"\u003cp\u003eThe Sta-Rite 08428-0125 is the genuine Pentair rebuild kit for SwimQuip pool inlets. It replaces the parts of a return fitting that actually wear: a white face plate, an adjustable eyeball inlet and the screws that hold the plate on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made for Sta-Rite SwimQuip inlet fittings with a 1-1\/4 in. IPS connection, the fitting typically set in the wall of a gunite pool. If the body in the wall is sound, this kit is all the repair needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEyeballs crack, seize or lose their grip over years of sun and chlorine, and a return you cannot aim means poor circulation. A new eyeball restores the ability to direct flow, and the fresh white face plate tidies up the wall.\u003c\/p\u003e\u003cp\u003eThis is the white kit. A gray version is available separately for pools with darker finishes.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624956506324,"sku":"STA-251-2827","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_83177378-b1fc-440e-8f82-cd95a814db31.jpg?v=1788655997"},{"product_id":"pool-defender-2-compact-sacrificial-zinc-anode","title":"CMP Pool Defender 2 in. Compact Sacrificial Zinc Anode","description":"\u003cp\u003eThe CMP 25810-400-050 is the compact version of the Pool Defender, an inline sacrificial zinc anode that plumbs into 2 in. pipe. It ships with 4 ft of solid copper ground wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe problem it solves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pool carries electrical current from several sources, and that current keeps flowing even when the pump is off. In salt water it is stronger still. Left alone it eats away at heaters, rails, fittings and anything else metal in the system. Building codes now expect that current to be controlled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eZinc gives the current an easier path than your expensive metal components, so the anode corrodes and they do not. Bonded correctly, the inline Pool Defender helps protect the whole pool from galvanic corrosion, and the compact body fits in tighter equipment pads than a full size anode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the zinc as part of normal maintenance and replace it once about half of it has eroded, which typically works out to every three years or so. The replacement is inexpensive compared with the parts it protects.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625712627924,"sku":"CTM-301-1008","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_53d6eae3-66d8-4cf0-965d-066e94757be7.jpg?v=1788689147"},{"product_id":"thrd-ext-coup-1-5mipx1-5fip","title":"Hayward Threaded Extension Coupling, 1-1\/2 in. MIP x 1-1\/2 in. FIP, White","description":"\u003cp\u003eThe Hayward SPX1091Z9 is a threaded extension coupling, 1-1\/2 in. male iron pipe thread on one end and 1-1\/2 in. female iron pipe thread on the other, finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it solves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSometimes a threaded port ends up too deep to reach: a skimmer fitting set back in the deck, a return that finishes short of the wall face, a valve that sits behind other equipment. This coupling threads into the existing female fitting and gives you the same 1-1\/2 in. female port a little further out, with no size change and no cutting or gluing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWrap the male thread with sealant tape or use thread paste, then hand tighten and give it a modest turn with a wrench. Plastic threads do not need force, and overtightening is the usual way these fittings crack.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48625724391636,"sku":"HAY-25-1693","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dc2fb173-b443-4ef5-a971-8581a67906f1.png?v=1788690130"},{"product_id":"2-union-o-ring","title":"Jandy 2\" Union O-Ring","description":"\u003cp\u003eThe Jandy R0412700 is the o-ring for the 2 inch union, the seal that sits in the union face and holds the joint watertight. It is the genuine Jandy part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJandy uses 2 inch unions throughout the equipment pad, and this is the o-ring listed for that connection, including the 2 inch LX unions at an AquaPure cell. It is the part that comes out when a union is opened for winterizing or for cleaning a cell, and the part most likely to be pinched or nicked on the way back together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe mistake to avoid\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a union drips, the instinct is to lean on the collar. That does not work. A union seals on the o-ring, not on clamping force, and cranking the collar down distorts the faces and can crack the nut. If it weeps after hand tightening, the o-ring is done.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove, check that no grit is trapped in it, and put a thin film of silicone based lubricant on the new o-ring before assembly. It seats more evenly and comes apart far more easily next time.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625748705492,"sku":"JDY-451-0203","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e7dd3268-a4f2-46f4-a833-3171ed29c36b.jpg?v=1788691570"},{"product_id":"pool-tool-104r-kit-zinc-anode-replacement-kit","title":"Pool Tool Zinc Anode Replacement Kit","description":"\u003cp\u003eThe Pool Tool 104R-KIT is a zinc anode replacement kit. It is supplied complete with the zinc anode, the thru rod, a new cap and an O-ring, so the whole assembly is renewed rather than only the zinc.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow a sacrificial anode works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eZinc sits low enough on the galvanic scale that it corrodes before the other metals in a pool. That is the whole point of it. The anode gives itself up to the water chemistry so ladders, rails, light rings and other metal hardware do not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA zinc anode is a wear item. Plan on replacing it about every three years, and inspect it sooner if the pool has had heavy chemical swings. The practical rule is size: once the anode has been eaten down to roughly half of what it was when new, it no longer has enough zinc left to protect anything and should be changed.\u003c\/p\u003e","brand":"Pool Tool","offers":[{"title":"Default Title","offer_id":48625784062164,"sku":"PTE-45-9800","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_31bb66f2-f80d-4bb8-86d4-9b221af15458.png?v=1788692162"},{"product_id":"floor-plate-pentair-sta-rite-inlet-8428-2-mpt-white","title":"Sta-Rite White Adjustable Floor Cover Plate","description":"\u003cp\u003ePentair Sta-Rite 08417-0005 is the white cover plate for the adjustable floor inlet. It is the genuine replacement part, with a 2 inch male pipe thread connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFloor inlets return filtered water upward from the pool floor rather than sideways from the wall. That pattern lifts settled debris and mixes heated and chemically treated water through the whole body instead of skimming the top. The cover plate is the visible fitting at the floor, and it threads into the inlet below on a 2 inch male pipe thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the white version, matching white plaster and the rest of the white goods set into a pool floor. The same plate is offered in gray if that suits the interior better. It is listed for the Pentair Sta-Rite 8428 adjustable floor inlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFloor plates get walked on, brushed and chemically weathered. A cracked, discolored or missing plate is worth changing promptly, both for how the floor looks and to keep the inlet doing its job.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625790877908,"sku":"STA-251-5021","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5af4f053-499b-41c9-a987-a84e4aa559de.png?v=1788700145"},{"product_id":"hi-flo-suction-fitting-gry","title":"SuperPro Gray Fiberglass Hi-Flo Suction Fitting Complete with 6\" Cover, Wall Fitting and Nut","description":"\u003cp\u003eThe Super-Pro 25215-001-000 is a gray fiberglass Hi-Flo suction fitting supplied complete. The 6 in. cover, the wall fitting and the nut all come together, so there is nothing else to source before the fitting can go in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are buying\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the whole fitting rather than a replacement cover on its own. The body is fiberglass and the finish is gray. The nut holds the assembly through the pool wall, and the cover fastens on the pool side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart numbering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same fitting appears under two numbers, 25215-001-000 and 25215-001-000VGB. If a service company or a quote has given you either one, this listing is the part they mean.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48625852252372,"sku":"SPG-85-8802","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_98f97c7b-4ea3-4f67-9a2d-2ee22de556e7.jpg?v=1788701674"},{"product_id":"suction-discharge-hose-pkg-1-1-2","title":"Hayward 1-1\/2\" Suction and Discharge Hose Package","description":"\u003cp\u003eThe Hayward EC1155 is a suction and discharge hose package sized for 1-1\/2 in. connections. Hayward lists it as 1.5 in. by 6 ft and supplies both hoses as a single kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy hoses fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHose spends its life in sun and in and out of water. Over seasons it hardens, the wall thins where it flexes, and cracks open at the fittings. A discharge hose that splits is obvious because it sprays. A suction hose is not: it can pull air through a crack while showing no leak at all, and the symptoms turn up as a pump that will not hold prime or a steady stream of bubbles at the returns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth hoses in one package, as the genuine Hayward part rather than a generic length cut to size.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48626099486932,"sku":"HAY-051-1875","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_33579233-0e35-47c9-925d-e1c67e33748f.jpg?v=1788704709"},{"product_id":"1-1-2-union-male-thread-black","title":"Hayward 1-1\/2\" Union Male Thread, Black","description":"\u003cp\u003eThe Hayward SP1480BLK is a 1-1\/2 inch union with a male thread connection, in black. It is the genuine Hayward part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a union buys you\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA union is a threaded joint that comes apart. Fitted at a pump, filter or heater, it means the equipment can be unbolted and lifted off the pad for service or replacement without cutting pipe and gluing new fittings back in. Fitting unions on both sides of a piece of equipment is what makes future work a ten minute job instead of a repipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSize and connection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 1-1\/2 inch size with a male thread, the common residential pool equipment size. It is supplied in black to match black Hayward equipment ports and fittings.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48626109579476,"sku":"HAY-25-1580","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_70d11838-a3bf-4188-989b-8a2f2c039913.jpg?v=1788704935"},{"product_id":"master-flex-vacuum-hose-1-1-2-x-50-with-swive-cuff","title":"Oreq Master Flex Vacuum Hose 1-1\/2\" x 50' with Swivel Cuff","description":"\u003cp\u003eThe Oreq VH3250 is a Master Flex pool vacuum hose, 1-1\/2 inch in diameter and 50 feet long, finished in lime green with a swivel cuff on one end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe swivel cuff\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVacuuming a pool means walking the head back and forth in long passes, and every pass puts a half turn into a fixed hose. Fifteen minutes in, an ordinary hose is a coiled spring that lifts the head off the floor. The swivel cuff breaks that link: the head turns, the hose does not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1-1\/2 inch is the standard bore for residential vacuum heads and skimmer vacuum plates, and 50 feet reaches the far wall of most backyard pools from the skimmer. If your pool is on the larger side, measure the longest run you will need before ordering.\u003c\/p\u003e\u003cp\u003eThe lime green finish is not just cosmetic. A bright hose is easy to spot in the water, and easy to see on a wet deck.\u003c\/p\u003e","brand":"Oreq","offers":[{"title":"Default Title","offer_id":48626116526292,"sku":"POP-40-3038","price":132.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_deee70bc-afb7-447e-b967-75fd0230041b.jpg?v=1788705040"},{"product_id":"2-union-complete-caretaker","title":"Polaris Caretaker Genuine OEM 2\" Union Complete","description":"\u003cp\u003eThe Caretaker 4-1-2002 is the complete 2 inch union used on Caretaker valve plumbing. It is the genuine OEM part, supplied as a complete union rather than as a single half.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the union matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA union is what lets a valve come out of the line for service without a saw. When it stops sealing, the choices are a leak at the pad or cutting pipe, and neither one is a good afternoon. Replacing the union restores a clean, serviceable joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit it complete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnion halves, nuts and seats wear as a set. Mixing a new nut onto an old seat usually puts the drip back within a season, which is why this part is listed complete. Confirm your plumbing is 2 inch before ordering.\u003c\/p\u003e","brand":"Caretaker","offers":[{"title":"Default Title","offer_id":48626311069908,"sku":"CTK-201-884","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_34e40de4-738c-4fc6-8396-8316df8a8966.jpg?v=1788708044"},{"product_id":"waterway-640-1900-v-10-tru-flo-cover-and-frame-white","title":"Waterway 10\" Tru Flo Cover and Frame, White","description":"\u003cp\u003eThe Waterway 640-1900 V is the 10 inch Tru Flo cover and frame in white. It is supplied as the cover with its matching frame rather than as the cover alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCovers of this kind live in sun and chlorinated water and eventually discolor, become brittle or crack. Replacing cover and frame as a set means the new cover seats in a frame that was made for it, rather than in one that has already been distorted by age.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the Waterway part number against the item you are replacing and confirm the 10 inch size and the Tru Flo name. Waterway builds several cover ranges, and they are not interchangeable.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626364842196,"sku":"WWP-25-8616","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4ff32daa-ed56-404a-a4ad-9192afa7c70f.jpg?v=1788709309"},{"product_id":"master-flex-vacuum-hose-1-1-2-x-35-w-swivel-cuff","title":"Oreq Master Flex Vacuum Hose 1-1\/2\" x 35' with Swivel Cuff","description":"\u003cp\u003eThe Oreq VH3235 is a Master Flex pool vacuum hose, 1-1\/2 in. in diameter and 35 ft long, finished with a swivel cuff.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is built\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hose is spiral formed with both an inner and an outer core, which is what lets it stay round under suction instead of flattening. The exterior profile is flat rather than deeply ribbed, so the hose slides past ladder legs, steps and corners rather than catching on them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe swivel cuff\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA fixed cuff makes the whole hose turn every time you swing the vacuum head, and that twisting is what puts permanent kinks and nicks into a hose. The swivel end rotates instead, so the hose lies straight and lasts longer.\u003c\/p\u003e\u003cp\u003eAt 35 ft it suits a mid size pool worked from one skimmer or a dedicated vacuum line. Measure from your connection point to the far corner before choosing a length.\u003c\/p\u003e","brand":"Oreq","offers":[{"title":"Default Title","offer_id":48626388598996,"sku":"OREQ-40-VH3235","price":138.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c873702f-1096-4c71-a8d7-6408b161c61d.jpg?v=1788709670"},{"product_id":"1-1-2-x-1-1-2-s-union-mpt","title":"Waterway 1-1\/2\" x 1-1\/2\" S Union MPT","description":"\u003cp\u003eThe Waterway 400-4030 is a 1-1\/2\" union for pool equipment plumbing: a 1-1\/2\" male pipe thread on one side and a 1-1\/2\" female slip socket on the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions belong at the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnything you will one day take off the pad should be plumbed with unions. Put one on each side of the pump and the filter and every future service call is a matter of loosening two nuts by hand. Without them, pulling a pump means cutting pipe, buying couplings, and waiting on glue before the system can run again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe threaded end screws into the port on the pump or filter. Use silicone or teflon tape on that thread and take it up snug rather than hard, since plastic threads split when they are overtightened. The slip side solvent welds onto 1-1\/2\" PVC pipe. The union nut seals on its own face, so it does not need tape.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626391875796,"sku":"WWP-56-4516","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a7aa0dac-bf7d-4e40-9461-2f9b34f390e9.jpg?v=1788709731"},{"product_id":"jet-array-inline","title":"CMP In-Line Jet Array","description":"\u003cp\u003eThe CMP 23308-930-000 is an in-line jet array from Custom Molded Products. It is ordered by part number, and matching that number is the surest way to get an array that drops into the same place as the one coming out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn-line versus mounted\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe in-line configuration sits within the plumbing run itself. That matters when you are replacing an existing array, because the fitting has to line up with pipework that is already in the ground or already built into the shell.\u003c\/p\u003e\u003cp\u003eCustom Molded Products has supplied fittings to the pool and spa trade for decades, and CMP part numbers are carried across their catalog, so the 23308-930-000 designation is the reliable identifier here.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626580324564,"sku":"CTM-85-301","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_42aacfa0-0c5a-49ae-9ae6-02afd6313803.jpg?v=1788712664"},{"product_id":"2x100-flex-pipe","title":"Pacific Echo 2\" x 100' Spiralite Spa-Flex Pool and Spa Hose","description":"\u003cp\u003ePacific Echo Spiralite Spa-Flex is flexible pipe made for swimming pool and spa plumbing. This is the 2 inch size in a 100 foot length, in white, part 710-00-200.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy flexible pipe\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRigid PVC needs a fitting at every change of direction, and every fitting is another glue joint that can fail and another restriction in the run. Flexible pipe follows the curve instead, which cuts the joint count on equipment pad plumbing, spa runs and anywhere the path is not a straight line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e2 inch is the common size on pool and spa plumbing, and this length covers a full run without splicing. Confirm the pipe size on the system you are working on before ordering.\u003c\/p\u003e","brand":"Pacific Echo","offers":[{"title":"Default Title","offer_id":48626601722068,"sku":"PEC-56-4139","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PEC-56-4139.jpg?v=1788712929"},{"product_id":"fullflow-2-pvc-sweep-90-degree-street-elbow-slip-x-spg-black","title":"Aquamoto FullFlow 2\" PVC Sweep 90 Degree Street Elbow Slip x SPG, Black","description":"\u003cp\u003eThis is the Aquamoto FullFlow 2 in. sweep 90 degree street elbow in black, with a slip socket on one end and a male spigot on the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a sweep\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery sharp corner in a plumbing run costs the pump something. A sweep 90 has a longer radius than a standard elbow, so water turns gradually rather than slamming into a corner. On a pad with several direction changes, swapping standard elbows for sweeps is one of the cheaper ways to take load off the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy street\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe spigot end is sized like pipe, so this elbow drops straight into the socket of the next fitting. That removes the short stub of pipe and the extra glue joint a standard slip by slip elbow would need, which keeps assemblies tighter in a crowded equipment pad and gives fewer joints to leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a 2 in. fitting: the slip side takes 2 in. pipe, the spigot side goes into a 2 in. socket.\u003c\/p\u003e","brand":"American Granby","offers":[{"title":"Default Title","offer_id":48626702450900,"sku":"AQM-21006-004-000","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_685bf10e-eb0d-41eb-bc60-dee79b565d64.png?v=1788713853"},{"product_id":"1-mpt-bronze-poolbond-water-bonding-fitting","title":"Perma-Cast 1\" MPT Bronze PoolBond Water Bonding Fitting","description":"\u003cp\u003eThe Perma-Cast PB-2008 is a bronze PoolBond water bonding fitting with a 1 inch male pipe thread. It gives the pool water a deliberate electrical connection that can then be tied back to the bonding grid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is required\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 2008 National Electrical Code calls for an intentional electrical bond to be made to the pool water, and that contact has to be connected to the swimming pool bonding grid. PoolBond fittings were made to satisfy that requirement without a complicated or expensive install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is bronze, a non-ferrous casting. Perma-Cast, based in Export, Pennsylvania, was founded in 1988 and builds permanent mold castings for the pool trade. The PB-2008 threads into a 1 inch female port, so it can go into the plumbing wherever the design calls for the bond to be made.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48626743017684,"sku":"PER-57-1000","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6fe4ceb3-5d34-45c6-b2de-73e6c6cf2d2c.jpg?v=1788714239"},{"product_id":"3-4-male-x-3-4-slip-union","title":"CMP 3\/4\" Male x 3\/4\" Slip Union","description":"\u003cp\u003eThe CMP 21063-750-000 is a 3\/4 in. union with a male thread on one end and a slip socket on the other. It is the fitting most often used when plumbing a booster pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA booster pump comes off the pad more often than most equipment: for service, for storage and for winterizing. Plumbed with unions, that is a two minute job with a wrench. Plumbed solid, it means cutting the pipe and gluing it back every single time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe male thread goes into the pump port and the slip socket glues to 3\/4 in. pipe. Check the port sizes on your own pump before ordering, and look at whether the install needs a union on both the suction and the discharge side.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626825625812,"sku":"CTM-56-2006","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b0be2bc5-8ad2-4f13-a49a-f581f98640d7.jpg?v=1788715522"},{"product_id":"master-flex-vacuum-hose-1-1-2-x-40-w-swivel-cuff","title":"Oreq Master Flex Vacuum Hose 1-1\/2\" x 40' with Swivel Cuff","description":"\u003cp\u003eThe Oreq VH3240 is a 1-1\/2 inch by 40 foot Master Flex vacuum hose for manual pool vacuuming. It is spiral formed with an inner and an outer core, so the wall is heavier than a budget hose of the same diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe swivel cuff\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne end carries a swivel cuff. As you push a vacuum head back and forth across the floor, a fixed hose winds up on itself and starts pulling the head off line. The swivel lets the cuff rotate with the head instead, which keeps the run of hose straight and keeps kinks from forming at the connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandling and wear\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe exterior has a flat profile rather than a deep rib. Less of the hose stands proud, so there is less to catch on ladders, steps, corners and coping when you drag it around the deck, and less to nick. The 40 foot length covers most residential pools from one skimmer or dedicated vacuum port.\u003c\/p\u003e","brand":"Oreq","offers":[{"title":"Default Title","offer_id":48626859770068,"sku":"POP-40-3036","price":126.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d39240d4-7380-4607-ba99-49743a626fb5.jpg?v=1788715957"},{"product_id":"pool-plumbing-piping-labels","title":"Pool I.D. Pool Plumbing and Piping Tag Labels","description":"\u003cp\u003eThese are adhesive tag labels for the PVC plumbing on a pool equipment pad, part number SP1107. The listing covers one sheet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat they solve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA typical equipment pad is a knot of white pipe with nothing on it to say which line is which. Skimmer, main drain, returns, spa, heater bypass: they all look identical. Labeling the lines once turns guesswork into a glance, which matters most when someone unfamiliar with the system has to shut a valve in a hurry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplying them\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean and dry the pipe first so the adhesive has a proper surface to grip, then place each label where it can be read from where you normally stand at the pad. Work through the system one line at a time so nothing gets mislabeled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne sheet of labels. A large pad with many valves may need more than one sheet.\u003c\/p\u003e","brand":"Oreq","offers":[{"title":"Default Title","offer_id":48626964562132,"sku":"KER-56-4100","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d6d2a98b-8fb5-4ad2-967e-37b3c6407be4.png?v=1788718552"},{"product_id":"aquastar-high-temperature-2-threaded-union-unht20","title":"AquaStar High Temperature 2\" Threaded Union","description":"\u003cp\u003eThe AquaStar UNHT20 is a 2 inch high temperature threaded union, 2 in. MIP on one side and a 2 in. socket on the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSelf sealing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe union seals on its own, so there is no Teflon tape to wrap and no dope to apply at the joint. That removes the most common source of a slow drip on a union, which is a tape wrap that was not quite right.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a union belongs there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnions are what make equipment serviceable. When a piece of gear has to come out, the union breaks loose at the nut and both pipe stubs stay put. Without one, the same job means cutting pipe and gluing in couplings.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48627001327828,"sku":"PSU-167968","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_adc8ed4d-d3f9-4666-9f2a-362591e9f671.png?v=1788718929"},{"product_id":"pvc-2-union-slip-by-slip","title":"SuperPro PVC 2\" Union, Slip by Slip","description":"\u003cp\u003eThe SuperPro 21049-200-000 is a 2 inch PVC union with slip connections on both sides and a self aligning design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions matter on a pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery piece of equipment that will eventually need pulling should sit between unions. When that day comes, the nuts break loose and the gear lifts out. Without them, the same job means cutting pipe, then gluing in couplings to put it back, and the pad slowly gets shorter every time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSelf aligning\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJoining two runs that are already glued in place rarely leaves them perfectly square to each other. The self aligning design lets the halves seat anyway, which is the difference between a union that pulls up tight and one that weeps no matter how hard you crank the nut.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627005620436,"sku":"SPG-56-0003","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5776e7c5-4823-4951-a0f5-fede6d7b0ede.png?v=1788718979"},{"product_id":"universal-half-union","title":"Jandy Universal Half Union","description":"\u003cp\u003eThe Jandy R0522900 is the universal half union kit, supplied as a set of one. It is the genuine Jandy part, the same half union fitted to the equipment at the factory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJandy uses this half union across a wide slice of the Pro Series line: the CL, CS, CV, DEL and DEV filters, and the JXi heaters. That makes it a useful part to recognize, because one kit answers a leak on several different pieces of equipment in the same pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA union that keeps weeping after it has been tightened is telling you the plastic has failed. Hairline cracks around the collar and threads that have been pulled out of round both let water past no matter how hard the nut is turned. Fitting a new half restores a joint you can break again later without cutting pipe.\u003c\/p\u003e\u003cp\u003eOrder one kit per connection you plan to replace.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48627240435924,"sku":"R0522900","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_11ab8fc7-c7bf-4a33-8a4c-3b4f30e1e75e.png?v=1788720267"},{"product_id":"2-union-male-pipe-thread-by-female-slip","title":"Waterway 2\" Union, Male Pipe Thread by Female Slip","description":"\u003cp\u003eThe Waterway 400-5080 is a 2 in. union with male pipe thread on one end and a female slip socket on the other. It is the fitting that joins 2 in. pool pipe to a threaded pump or filter port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the union matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery piece of equipment on a pad eventually comes off for service or replacement. A union in the line means that job is a matter of loosening a collar by hand. Without one it means a saw, new pipe and fresh glue, and a plumbing repair on top of the original job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe threaded end screws into the equipment port with PTFE tape or a pool rated thread sealant, tightened by hand plus a modest turn. The slip end is solvent welded to 2 in. pipe. Keep sealant out of the slip socket so the joint bonds properly.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627373801684,"sku":"WWP-56-4517","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f1061a71-b6de-4722-860f-cf6ab564caec.jpg?v=1788722901"},{"product_id":"cmp-25207-801-000-equalizer-suction-1-1-2-inch-mip-gray","title":"CMP Equalizer Suction, VGB, 1-1\/2 Inch MIP, Gray","description":"\u003cp\u003eThe CMP 25207-801-000 is an equalizer suction fitting in gray, with a 1-1\/2 inch MIP connection, carrying the VGB suction outlet rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the equalizer does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn equalizer is a second suction port set into the pool wall below the skimmer. If the water level drops below the skimmer mouth, the skimmer would otherwise pull air and the pump would lose prime. The equalizer keeps a supply of water reaching the pump instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 1-1\/2 inch MIP thread lets the fitting screw straight into a matching female connection at the wall. This is the gray version; the same fitting is sold in white under its own part number, so pick the one that matches the rest of your wall fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOn the rating\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuction outlet fittings are a safety item, not a cosmetic one. This fitting carries the VGB rating, which is what a replacement suction fitting needs to have.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627569590484,"sku":"CTM-251-8206","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8b57c481-22e3-4380-b722-c3f3ce0d0f2c.jpg?v=1788723746"},{"product_id":"union-half-2-x-2-slip","title":"Sta-Rite Union Half, 2\" x 2\" Slip","description":"\u003cp\u003eThe Sta-Rite PKG 188 is a 2 inch by 2 inch slip union half. Both ends are slip, so it solvent welds onto rigid 2 inch PVC pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt appears on Sta-Rite Dyna-Glas and Dyna-Max pumps, on the Dyna-Pro and Dyna-Pro E medium head pumps, on the Max-E-Pro series, and in the Pentair MasterTemp gas heater water system. That breadth is normal for a union half, which is a plumbing part rather than a model specific casting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions earn their place\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA union at each port is what lets a pump or heater come off the pad without a saw. When a union half cracks at the threads or the pipe stub, replacing it is far cheaper than reworking the plumbing, and it keeps the next service call simple.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOn assembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is a single union half, so count your ports. Put a silicone based lubricant on the o-ring before you tighten it up, and hand tight is usually enough.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48627577487572,"sku":"STA-10-417","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3d586cd6-9e31-4b34-905f-d054f4907fba.jpg?v=1788723843"},{"product_id":"bw-1-5-led-light-dn-fg-fit","title":"CMP Fiberglass Pool Dry Conduit Nicheless LED Light Wall Fitting 1.5\"","description":"\u003cp\u003eThe CMP 25503-510-500 is the dry conduit wall fitting for a 1.5 inch nicheless LED light in a fiberglass pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNicheless lighting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA nicheless light mounts straight into a wall fitting rather than sitting inside a large niche cast into the pool wall. That makes the fitting itself the mounting point and the pass through for the light cord, which is why it has to match both the light size and the pool shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePick the right version\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCMP makes the same fitting in separate versions for fiberglass, gunite and vinyl pools. This one is the fiberglass version. It is also the dry conduit variant, so it suits an installation where the conduit behind the wall is kept dry.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627586793684,"sku":"CTM-301-1023","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/bw-1.5-led-light-dn-fg-fit-CMP25503-510-500.jpg?v=1788723956"},{"product_id":"2-union-nut-tail-piece","title":"Hayward 2\" Union (Nut and Tail Piece)","description":"\u003cp\u003eThe Hayward GLX-CELL-UNION is a 2 inch union supplied as the nut and the tail piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a union is there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnions are what make pool equipment serviceable. Without one, taking a piece of equipment out of the line means cutting pipe and gluing it back afterwards. With one, the nut backs off and the component lifts out. That convenience is worth keeping in good order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnion nuts are a known wear point. Years of sun, seasonal expansion and over tightening leave hairline cracks that open under pressure, and a scored tail piece face will weep no matter how hard the nut is pulled up. Replacing the pair is the fix; more torque is not.\u003c\/p\u003e","brand":"Goldline Controls","offers":[{"title":"Default Title","offer_id":48627590168788,"sku":"GLD-451-1003","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_017eadd1-87a6-4bb5-a557-3c492a4c99a8.jpg?v=1788723984"},{"product_id":"eyeball-inlet-assembly","title":"Sta-Rite Eyeball Inlet Assembly","description":"\u003cp\u003eThis is the Sta-Rite eyeball inlet assembly, part 08428-0001, in white and sized 1-1\/4 inch. It is the gunite version, the inlet that sits in the wall of a concrete pool and carries filtered water back into it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the eyeball does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ball swivels inside the fitting, so the return stream can be aimed. That matters more than it sounds: pointing returns away from the skimmer and toward the corners is how a pool gets even circulation instead of a warm, still patch at one end. A cracked or seized eyeball loses that adjustment, and a missing one lets the return blast straight out at whatever is in front of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNumbers to watch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same fitting appears under two numbers. 08428-0001 is the one carried now, while older paperwork and Swimquip era parts lists show it as 8428-7. If your diagram gives one and your invoice gives the other, they point at this fitting.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48627598164180,"sku":"STA-251-7244","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2cf19f82-8d88-4184-a54e-10a49ddb3f1f.png?v=1788724074"},{"product_id":"flange-3-w-gaskets-ss-hardware","title":"Pentair Flange 3\" with Gaskets and SS Hardware","description":"\u003cp\u003ePentair 357261 is the 3 inch flange, supplied with its gaskets and stainless steel hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA complete kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe value here is that everything needed to make the joint is in one part number. Buying a bare flange and then hunting for the right gasket and the right length of stainless bolt is how a half hour job becomes a second trip. This ships with all three.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 3 inch version. Pentair lists the same flange in 4 inch and 6 inch, and they are separate part numbers, so measure the pipe or the mating face before you order.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627615072468,"sku":"PUR-101-7261","price":100.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e4ae1fae-73c4-426a-ae8b-8f29934caf02.jpg?v=1788725362"},{"product_id":"pentair-523148-bioshield-3-union-kit","title":"Pentair Bioshield 3\" Union Kit","description":"\u003cp\u003eThis is the Pentair 523148 union kit, the 3 in. unions listed for the Bioshield units 522638 and 522945. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnions are the joints that let a piece of equipment be taken out of the plumbing without a saw. Everything about servicing a unit, from a seasonal strip down to a full replacement, is easier when the unions on either side are sound. When one cracks or refuses to seal, the whole assembly is on the wrong side of a repair that should take minutes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the Bioshield part number on your unit against the two this kit is listed for, 522638 and 522945, and confirm the 3 in. size on your existing connections.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627623559380,"sku":"PAC-451-3036","price":310.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c55699a0-30c8-41e0-a9cf-856617c4e0cf.png?v=1788725496"},{"product_id":"perma-cast-tn-il-20-2-inline-anode","title":"Perma-Cast 2\" Inline Anode","description":"\u003cp\u003eThe Perma-Cast TN-IL-20 is a 2 inch inline sacrificial anode carrying 53 square inches of zinc inside a clear PVC housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a sacrificial anode does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePut dissimilar metals in the same body of water and the more reactive one gives up material to protect the rest. A zinc anode is deliberately the most reactive metal in the system, so it corrodes first and the heater core, the metal filter parts and the rest of the plumbing metal do not. The anode is meant to be consumed, and replacing it is the whole point of fitting one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it installs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe TN-IL-20 goes inline in the plumbing and connects directly to the metal filter or heater core it protects. The housing is clear PVC, so you can see how much zinc is left without breaking into the line. A weatherproof installation sticker is included to record the install and the service date on the equipment.\u003c\/p\u003e","brand":"Perma-Cast","offers":[{"title":"Default Title","offer_id":48627702923476,"sku":"PER-351-1001","price":118.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d450ea78-7ce5-46fe-b03f-8dfb4ed19767.png?v=1788726785"},{"product_id":"1-5-union-gasket","title":"Waterway 1.5\" Union Gasket","description":"\u003cp\u003eThe Waterway 711-4000 is the flat gasket that seals a 1-1\/2 in. union. It sits between the union nut and the fitting and is the part that actually makes the joint watertight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway uses this gasket across a wide range of equipment: center discharge pumps, Carefree and Clearwater sand filters, and replacement pump strainer traps. If a 1-1\/2 in. Waterway union is involved, this is the gasket in it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChasing a union leak\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA union that weeps at the nut is nearly always a gasket problem, not a cracked fitting. Gaskets flatten, take a permanent set, get nicked when the joint is opened, or dry out over a season. Hand tighten the nut first; if it still drips, take it apart and look at the gasket. A thin film of pool rated silicone lubricant on the new one helps it seat and makes the union easier to open next time.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627708330196,"sku":"WWP-851-8078","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fead124f-89c5-4adf-8412-2e3d2dfbbfea.gif?v=1788727005"},{"product_id":"2-tee-zinc-anode","title":"Pool Tool 2\" Slip x Slip Inline Anode","description":"\u003cp\u003eThe Pool Tool 104-D is a 2 inch slip by slip inline zinc anode. It plumbs into the line and attaches to the bonding wire, and it ships with 4 feet of #8 copper bonding wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat galvanic corrosion does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDissimilar metals sitting in the same body of water set up a small current, and the least noble metal in that circuit is the one that gets eaten. Left alone, that is the heater, the light housings and the rails. A zinc anode is deliberately the least noble metal in the loop, so the current attacks the zinc instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is installed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe anode goes inline on a 2 inch run, slip on both ends, and the anode is attached to the bonding wire so it covers every bonded metal part in the system. This part is sold for new installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpect to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn anode is a wear part by design. It is doing its job when it is wasting away, so it should be inspected on a schedule and changed once it is spent.\u003c\/p\u003e","brand":"Pool Tool","offers":[{"title":"Default Title","offer_id":48627739558100,"sku":"PTE-45-1003","price":110.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_449d576b-4cc6-4b23-9cb4-517b4416dc07.png?v=1788727588"},{"product_id":"union-1-5-thread-x-2-slip-hi-temp","title":"CMP Union, 1.5\" Thread x 2\" Slip, Hi-Temp","description":"\u003cp\u003eThe CMP 21063-160-000 is a hi-temp union assembly that threads into a 1-1\/2 inch port and glues to 2 inch PVC. It is the fitting you use when the pump or filter is 1.5 inch and the plumbing around it is 2 inch, which is a very common combination on a modern system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the O-ring matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe threaded side seals on an O-ring, not on thread tape. That removes the whole ritual of wrapping, testing, unwrapping and rewrapping, and more importantly it removes the reason people overtighten. A tapered thread pulled up hard into a plastic housing is how pump and filter ports get cracked, and it is an expensive way to fix a small leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHi-temp construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is CPVC and PVC rather than plain PVC, so it handles the warmer water on the discharge side of a heater without going soft. The union face itself seals on a T ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eServiceability\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe point of a union is that it comes apart. Loosen the nut and the equipment separates from the plumbing, so a pump can be pulled for a seal change or a filter opened without a saw and a bag of couplings.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627842318548,"sku":"CMP-21063-160-000","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_43740c99-c54f-48c2-84d2-56b1711dbb7b.jpg?v=1788728141"},{"product_id":"replacement-union-nut","title":"Pentair Black Replacement Union Nut, SuperMax","description":"\u003cp\u003eThis is the black replacement union nut Pentair lists as 270141Z, also referenced as 270141. It is the nut that pulls a union connection tight where plumbing meets the pump or the valve body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same nut turns up in two places: on the Sta-Rite SuperMax and Pentair SuperFlo pumps, and on the Pentair push pull valves 263052, 263053 and 263064. That makes it a common spare for a service van, because it is the piece most often lost or cross threaded when equipment comes apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnion nuts fail in two ways. The threads strip, usually from being started crooked, or the nut cracks after years of sun and repeated tightening. Either way the joint weeps and no amount of extra torque will close it. Fitting a fresh nut, and checking the union O-ring while the joint is open, puts it right.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe union nut alone. The union adapter that threads into the pump or valve is ordered separately.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627982631124,"sku":"PAC-061-0141","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_32037c3d-b4df-4ccc-bfbf-f26fc57c2539.gif?v=1788732292"},{"product_id":"1-1-2-slip-x-threaded-union-abs-sp14953s","title":"Hayward 1-1\/2\" Slip x Threaded Union (ABS)","description":"\u003cp\u003eThe Hayward SP14953S is a 1-1\/2 inch union in ABS, with a slip socket on one side and a threaded connection on the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnions are the joints in a pool system that come apart by hand. Every pump, filter and heater that has a union on each side can be pulled out for service or replacement without cutting pipe, and put back the same afternoon. Systems plumbed without them turn a simple seal change into a plumbing job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlip and thread\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe slip side glues onto 1-1\/2 inch pipe. The threaded side screws to a threaded port on a piece of equipment. Use the right sealant on the thread and do not overtighten plastic threads, since they split more readily than they strip.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628781514964,"sku":"HAY-25-1557","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_92375c52-ed20-4447-a009-a697089f00e1.jpg?v=1788750522"},{"product_id":"cmp-21093-900-000-90-degree-hose-adaptor","title":"CMP 90-Degree Hose Adaptor","description":"\u003cp\u003eThe CMP 21093-900-000 is a 90 degree hose adaptor for pool and spa plumbing. It carries a hose connection around a right angle, which is what you need where a sweeping bend will not fit or the hose would otherwise kink.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe available information on this fitting is limited to the manufacturer part number, so order it by that number and check it against the hose and the port at your end before installing.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48628784169172,"sku":"21093-900-000","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1dfe2d91-6b70-47e7-b427-446bc88f4265.jpg?v=1788750620"},{"product_id":"fullflow-2-pvc-sweep-90-degree-elbow-slip-x-slip-black","title":"CMP FullFlow 2\" PVC Sweep 90 Degree Elbow Slip x Slip, Black","description":"\u003cp\u003eThe CMP FullFlow 21005-004-000 is a 2 inch black PVC sweep 90 degree elbow with slip connections at both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a sweep\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery hard corner in the plumbing takes something out of the flow, and the tighter the corner the more it takes. A sweep elbow makes the same 90 degree turn on a long radius, so the water carries more of its energy through the bend. Across an equipment pad with several turns, that difference shows up as flow the pump does not have to work for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth ends are slip sockets for 2 inch pipe, so it is a straight solvent weld. CMP also lists a street version of the same fitting, slip by spigot, for the spots where a socket on both ends will not work.\u003c\/p\u003e","brand":"American Granby","offers":[{"title":"Default Title","offer_id":48628784267476,"sku":"AQM-21005-004-000","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_58add0f8-8a7d-459b-8a8d-0c0f43d46501.png?v=1788750634"},{"product_id":"vari-flo-nozzle-assembly-adjustable","title":"Hayward Vari-Flo Nozzle Assembly, Adjustable","description":"\u003cp\u003eThe Hayward SP1434PAKB is the adjustable Vari-Flo nozzle assembly for the Jet Air III. It is the genuine Hayward part, supplied as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat adjustable buys you\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Vari-Flo design lets you set the direction of the jet and the amount of flow through it. That matters more than it sounds: aiming a jet properly is how you keep the surface turning over, push debris toward the skimmer, and stop a dead corner from going cloudy while the rest of the pool stays clear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNozzles crack, chalk up and eventually seize in one position or lose the grip that holds the aim. Because it is the fitting people actually see in the wall, a broken one is a cosmetic problem as well as a circulation one, and it is one of the quickest parts on the pool to change.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628808941780,"sku":"HAY-85-8137","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3ede67f9-e682-4d6d-b676-bf13ae74bb3c.jpg?v=1788751969"},{"product_id":"hayward-sp1023dgr-1-5-fpt-dark-gray-inlet-fitting","title":"Hayward 1-1\/2\" Wall Fitting with Locknut and Gaskets, Threaded, Dark Gray","description":"\u003cp\u003eThe Hayward SP1023DGR is a 1-1\/2 inch FPT wall inlet fitting in dark gray, supplied with the locknut and gaskets. It is the return side fitting, the point where filtered water comes back into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThreaded, not slip\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis version is female pipe thread, so it threads onto the pipe. Hayward makes a slip version of the same fitting for glued plumbing, so check which one is on the pool before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe DGR suffix is the dark gray finish. Choose it to match dark gray fittings and trim, where a white fitting would be obvious against the wall.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628810383572,"sku":"HAY-25-1548","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e3681120-2373-45b5-b439-e11846733702.jpg?v=1788752174"},{"product_id":"vinyl-wall-fitting-1-5fpt-x-1-5skt","title":"Waterway Vinyl Wall Fitting, 1.5\" FPT x 1.5\" SKT","description":"\u003cp\u003eThe Waterway 400-9060B is a vinyl wall fitting with a 1.5 in. female pipe thread on the pool side and a 1.5 in. socket on the plumbing side. It is the piece that carries water through a vinyl pool wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe two connections\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside the pool, the threaded face takes a directional eyeball or whatever threaded fitting the return calls for, with no adapter in between. Behind the wall, the socket accepts 1.5 in. pipe with solvent cement, so the buried joint is a glued one rather than a thread that can back off or weep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWall fittings crack. Sun, chemistry and a hard freeze all work on the plastic, and by the time water shows up behind the liner the fitting has usually been leaking for a while. If the fitting body is split or the threads have chewed out, replacing it is the fix.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48628828176596,"sku":"WWP-85-9060","price":14.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f2836c39-e9c8-43de-81a1-8dade9fd3810.jpg?v=1788753409"},{"product_id":"spa-return-check-valve-1-5-mip","title":"Val-Pak Spa Return Check Valve 1.5\" MIP","description":"\u003cp\u003eThe Val-Pak V20-339 is a spa return check valve eyeball with a standard 1-1\/2 in. male thread. It replaces the plain return eyeball in an overflow spa and adds a one way valve behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe problem it solves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn a spa that spills over into the pool, the spa sits higher than the pool. When the pump stops, water in the spa wants to run back out through the return plumbing and into the pool. A check valve in the return holds it where it belongs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve is contained in the eyeball, so nothing has to be cut into the pipework. It threads into the existing 1-1\/2 in. return fitting in place of the eyeball that is there now.\u003c\/p\u003e\u003cp\u003eIf your spa is losing level to the height of the return and no further, this fitting is the first thing to check.\u003c\/p\u003e","brand":"Val-pak","offers":[{"title":"Default Title","offer_id":48628829487316,"sku":"VAL-25-100","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f41aacf5-b0e1-4c33-9bbb-ea8cfe7d8add.jpg?v=1788753548"},{"product_id":"aquamoto-white-1-2-directional-flow-eyeball-inlet-jet-standard-1-1-2-thread-pack-of-6-fittings-with-installation-tool","title":"Aquamoto White 1\/2\" Directional Flow Eyeball Inlet Jet, Standard 1-1\/2\" Thread, Pack of 6 Fittings with Installation Tool","description":"\u003cp\u003eThis Aquamoto kit is six white directional flow eyeball inlet jets with a 1\/2 in. opening, supplied with an installation tool. They fit standard 1-1\/2 in. threaded PVC pool wall return fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the opening size matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe eyeball hole sets how the return behaves. A 1\/2 in. opening produces a tighter, faster stream than a wider eyeball, which is what you want when you are trying to push circulation across the pool rather than simply let water back in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix at a time\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReturn jets discolor, crack and lose their grip over the years, and replacing one at a time leaves a mismatched pool. Six fittings covers the returns on most residential pools, and the installation tool makes seating and aiming them a short job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOther sizes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same fitting is offered with different openings, including a slotted version, a 3\/8 in. directional and a 1 in. eyeball, so match the flow you want before ordering.\u003c\/p\u003e","brand":"Aquamoto","offers":[{"title":"Default Title","offer_id":48628829716692,"sku":"AQM-25552-200-000-MF","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1a07f3d1-e350-4ab6-b833-5b1b50b13fb1.jpg?v=1788753584"},{"product_id":"1-1-2-pvc-male-adapter","title":"Lasco 1-1\/2\" PVC Male Adapter","description":"\u003cp\u003eLasco 436-015 is a 1-1\/2 inch PVC male adapter, threaded male on one end and a slip socket on the other. It is the fitting that gets glued pipe onto a threaded port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePool equipment is threaded and pool pipe is glued, so almost every pump, filter, heater and valve connection passes through an adapter like this one. 1-1\/2 inch is the size most residential systems are plumbed in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaking the joint\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe slip end takes primer and solvent cement to 1-1\/2 inch PVC pipe. The threaded end takes PTFE tape or a PVC rated paste. Snug it and stop. Torque is what cracks the female fitting on the other side, not what makes the joint seal.\u003c\/p\u003e","brand":"Lasco Fluid Distribution Produ","offers":[{"title":"Default Title","offer_id":48628846657748,"sku":"LAS-56-4089","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f99695bb-c46a-422e-88d3-9c1147831e29.png?v=1788755227"},{"product_id":"pulse-flo-nozzle-assy-rotate","title":"Hayward White JetAir Pulse-Flo Rotating Nozzle Assembly","description":"\u003cp\u003eThe Hayward SP1436PAKB is the genuine JetAir Pulse-Flo rotating nozzle assembly, finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat Pulse-Flo does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInstead of blowing in one fixed direction, the Pulse-Flo nozzle turns under the flow coming through it, so the stream sweeps rather than sits on a single point. That movement is also what wears it out: scale, grit and years of running eventually stop the nozzle turning, and a jet that has locked in one position or gone slow is past rebuilding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the nozzle assembly itself, so it goes into the JetAir fitting already set in the wall. The white finish matches the standard white JetAir trim, which matters if you are replacing one nozzle out of a row.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628861173972,"sku":"HAY-85-8138","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_48b908c9-7fe4-4642-88f2-441452f0e0f9.jpg?v=1788755613"},{"product_id":"1-1-2-mpt-x-slip-self-aligning-abs-female-slip","title":"Hayward SP1484 1-1\/2\" MPT x Slip Self-Aligning ABS Union Assembly","description":"\u003cp\u003eThe Hayward SP1484 is a self-aligning double end union assembly, 1-1\/2 inch male threaded on one end and a 1-1\/2 inch slip socket on the other. It is molded in white ABS and supplied complete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions belong on a pool pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery piece of equipment on the pad eventually comes off: a pump for a motor, a filter for a teardown, a heater for service. Where there is a union, that job is a hand tightened nut. Where there is not, it is a saw, a coupling and a day of glue cure before the pool runs again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe self-aligning part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlumbing on a pool pad is never perfectly square, and a rigid union will fight a run that is a degree or two off. This one seats itself as the nut comes up, which is what lets it seal against pipe that does not line up on its own. The Full-Flo body keeps the bore open so the union is not the restriction in the line.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628879294676,"sku":"HAY-25-1555","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_996a45ed-b959-48e4-ad6f-9f560cc553cc.jpg?v=1788756899"},{"product_id":"6-bulkhead-w-1-1-2-mip","title":"AquaStar 6\" Bulkhead with 1-1\/2\" MIP","description":"\u003cp\u003eThe AquaStar 615T101 is a 6 inch sumpless bulkhead adapter with a 1-1\/2 inch male threaded connection, supplied in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the mounting point behind a suction outlet cover, listed for the AquaStar 6HPHA series cover and for use with the 1022 female adapter. The sumpless design means the cover fastens to the bulkhead itself rather than to a separate sump body, which suits installations plumbed for that arrangement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing it correctly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo numbers matter: the 6 inch body has to match the cover series, and the 1-1\/2 inch MIP thread has to match the plumbing behind it. Confirm both against what is in the wall or floor before you order.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48628910129364,"sku":"API-251-1074","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_82aa53dc-c59e-4bbd-a672-91b596c2adad.jpg?v=1788757198"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/plumbing-fittings.oembed?page=2","provider":"Active Pool Supply","version":"1.0","type":"link"}