{"title":"Polaris 180 Parts","description":"\u003cp\u003eReplacement parts for Polaris 180, genuine OEM and compatible aftermarket.\u003c\/p\u003e","products":[{"product_id":"sweep-hose-scrubber","title":"Polaris Genuine OEM Tail Sweep Hose Scrubber, 9-100-3105","description":"\u003cp\u003eThe Polaris 9-100-3105 is the genuine tail sweep scrubber for Polaris pressure cleaners. It fits securely over the tip of the sweep hose and does two jobs at once: it scrubs pool surfaces, corners and steps as the tail moves, and it keeps the hose tip from wearing against the pool finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the Polaris 180, 280, 360, 380, 480 Pro and 3900 cleaners. This is a single scrubber, 3 in. long by 2 in. by 2 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eScrubbers are wear items. Replace this one when it begins to thin, tears, or no longer grips the hose tip securely.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624879730900,"sku":"POL-201-2174","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_58e05f81-1767-463a-af16-9d0429b97904.jpg?v=1788648768"},{"product_id":"back-up-valve-complete-white-180-280-380-3900","title":"Polaris Genuine OEM Back-up Valve, Complete, White (180, 280, 380, 3900)","description":"\u003cp\u003eThe Polaris G52 is the complete back-up valve for Polaris pressure cleaners: the case, the timer mechanism inside it and the case o-rings, in white. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve sits inline on the feed hose, 5 to 6 ft back from the cleaner head. Every 5 to 10 minutes its timer diverts water out of a jet, and the thrust pulls the cleaner away from whatever it has parked against, a step, the main drain, a wall or a ladder, so it can carry on cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA failed valve shows up one of two ways: the jet runs constantly and the cleaner never settles, or the jet never fires and the cleaner stays stuck for long stretches. Either way the G52 is the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the Polaris 180, 280, 380, 3900 Sport, TR28P, 280 TankTrax and 480 Pro. The arrow on the hose barb points toward the cleaner. If you only need part of it, the mechanism (G53), case kit (G54) and collar (G57) are available separately.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624880976084,"sku":"POL-201-7571","price":112.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7fb222ba-ef54-4dc8-b640-14c1cf17d575.jpg?v=1788648961"},{"product_id":"wall-fitting-connector-assembly-380-280-180-3900","title":"Polaris Wall Fitting Connector Assembly (380\/280\/180\/3900), 9-100-9001","description":"\u003cp\u003eThe Polaris 9-100-9001 is the complete universal wall fitting connector assembly that joins a pressure side cleaner's feed hose to the dedicated return line in the pool wall. It is the current design supplied on every new Polaris cleaner, and it adapts to the older 180, 280, 380, 3900 Sport and 480 Pro without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is everything at the wall end: the universal wall fitting (6-500-00), the pressure relief valve (9-100-9002), the UWF\/QD o-ring (6-505-00), the D29 quick disconnect body and both the red and blue restrictor discs (10-112-00) used to trim the feed pressure to the cleaner. The molded plastic parts are the genuine Polaris pieces, which keeps the cleaner's manufacturer warranty intact, and the assembly carries its own 90 day limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly threads into a 1-1\/2 in. fitting in the pool wall. If your pool still has the original 3\/4 in. return fitting, you will also need a 3\/4 in. x 1-1\/2 in. adapter coupling. Note that since March 2015 Polaris no longer includes the 6-504-00 filter screen, because current cleaners and feed hoses have an inline filter. If you still want the wall screen, add it separately.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624883400916,"sku":"POL-201-1441","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_975910ea-b2fe-48b3-b99c-26d020d2530d.jpg?v=1788649504"},{"product_id":"feed-hose-assembly-with-back-up-valve-and-in-line-filter","title":"Polaris Genuine OEM Complete 31-Foot Feed Hose with Backup Valve and In-Line Filter, 48-070","description":"\u003cp\u003eThis is the complete Polaris feed hose, part 48-070, packaged as one assembly that runs from the pool wall to the cleaner. It fits the Polaris 180, 280, 280 Tank Trax, 380 and 3900 Sport pressure side cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo 10 ft sections of feed hose and one 10 ft section of leader hose make up the 31 ft run. The universal wall fitting, swivels and nuts are included, along with the new style in-line filter assembly and the backup valve. Polaris installs the backup valve inline before it leaves the factory, so the pieces arrive in the order they belong.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the whole hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeed hoses wear at the swivels, kink at the sections and lose their in-line filter screens over the years. Replacing the set restores the cleaner to the way it left the factory, with a fresh backup valve to pull it off steps and out of corners, and saves hunting down each piece separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hose is white.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624917807316,"sku":"POL-201-4812","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bcb34f16-5d88-4e3b-8607-40179af77605.jpg?v=1788653259"},{"product_id":"factory-tune-up-kit-180-280","title":"Polaris Genuine OEM 180\/280 Factory Tune-up Kit","description":"\u003cp\u003eThe Polaris A49 is the factory tune up kit for the 180 and 280 pressure side cleaners. It bundles the parts that wear together, wheels, tires, axles, bearings and the turbine drive components, so one order brings a tired cleaner back to the way it ran new.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree C6 large wheels with three C10 MaxTrax tires, one C16 small idler wheel, two C66 large axles with sand and gravel guards, one C65 large axle for the rear wheel, eight C60 wheel ball bearings, a C36 swing axle kit, a C55 plastic wheel screw and four C64 wheel washers. For the drive train, two C80 turbine ball bearings, a C83 turbine shaft tube and a C86 drive shaft assembly. Instructions are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 180 or 280 that climbs poorly, drags a wheel, grinds or has cracked and bald tires is usually worn in more than one place at once. Replacing the bearings and axles along with the tires stops the new tires from wearing unevenly on old, sloppy running gear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine Polaris\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese are Polaris parts made to the original specifications, from the company that has built pressure side cleaners for over 40 years.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624917872852,"sku":"POL-201-9985","price":340.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_26bab61f-f92c-4d61-8e7d-b62276ae0bc9.jpg?v=1788653279"},{"product_id":"tire-maxtrax-180-280-380-360","title":"Polaris Genuine OEM Tire, MaxTrax (180\/280\/380\/360)","description":"\u003cp\u003eThe Polaris C10 is the MaxTrax all purpose tire for the Polaris 180, 280, 360 and 380 pressure side cleaners. It is the original factory service part, new and sealed in an individual Polaris package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGrip that is kind to the finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MaxTrax tread is designed for maximum traction on the pool floor and walls without scuffing plaster, tile or vinyl. That is what lets the cleaner climb and keep its pattern without leaving marks behind.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tire bolts to the backboard with four bolts. Hardware is not included, so keep the existing bolts when you pull the old tire. Each tire measures 6.5 in. by 6.5 in. by 1 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTires are a wear item. Change them when they no longer fit the wheel snugly, when the rubber has gone dry and brittle, or when they start to discolor or swell. Worn tires slip, and a slipping cleaner stops climbing and misses sections of the pool.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624918233300,"sku":"POL-201-3234","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1a05b40f-2c01-4b6c-baa9-49bb06cf3bf7.png?v=1788653348"},{"product_id":"tire-black","title":"Polaris Genuine OEM Tire, Black","description":"\u003cp\u003eThe Polaris C11 is the genuine black replacement tire for the Polaris 180, 280, 360 and 380 pressure side pool cleaners, and it also fits the Quattro P40 and Quattro Sport. Tires are the part of a Polaris that wears first, and worn ones let the cleaner spin in place instead of climbing and covering the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe C11 is the standard tire for these models. Polaris also offers a MaxTrax tire for the 180, 280, 360 and 380, so check which style you are replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tire stretches off and on the wheel by hand with no tools. Replace one per worn wheel, and replace them as a set when they are all thin so the cleaner tracks evenly.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624920133844,"sku":"POL-201-6512","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1f568f87-58be-4845-8c82-ae8a6485e26d.png?v=1788653484"},{"product_id":"hose-swivel","title":"Polaris Genuine OEM Hose Swivel for 380\/280\/180 Pool Cleaners","description":"\u003cp\u003eThe Polaris D20 is the genuine hose swivel for Polaris pressure side cleaners. It is the plastic coupling that joins one section of feed hose to the next and lets the sections rotate independently, which is what keeps the hose from twisting into a coil as the cleaner turns around the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe D20 fits the Polaris 180, 280, 280 TankTrax, 380, 3900 Sport and 480 Pro.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA hose that keeps kinking, a cleaner that stalls in one corner, or a swivel that no longer turns freely by hand all point to a worn swivel. Swivels also crack with age and start leaking pressure, which cuts the cleaner speed. They are inexpensive, so replace any that are stiff or cracked rather than waiting for them to fail.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624920166612,"sku":"POL-201-3265","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_59a6e31b-9569-4f26-9f12-221656e4fa3a.jpg?v=1788653489"},{"product_id":"wheel-ball-bearing-280-180","title":"Polaris Genuine OEM Wheel Ball Bearing (280\/180)","description":"\u003cp\u003eThe Polaris C60 is the genuine wheel ball bearing for the Polaris 280 and 180 pressure side cleaners, and it also fits the 280 TankTrax, 280 BlackMax, TR28P and Quattro. It is sold each. Every wheel runs two bearings, one on either side, so a complete cleaner uses eight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bearings are what let the wheels spin freely on their axles. When they wear, the wheel goes loose and starts to wobble. That is the moment to change them, because a wobbling wheel lets the drive shaft chew the gear teeth inside the wheel, and then you are replacing wheels instead of bearings. Fresh bearings also bring back the cleaner's movement: it tracks the floor properly, gets around the pool the way it used to and tangles its hose less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine Polaris\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eC60 is the factory part, made to Polaris specifications, and it comes with a 90 day limited manufacturer warranty. Polaris also lists it as C-60, PVC60, 81253 and 60266, so any of those numbers on an old parts list points to this bearing.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624922427604,"sku":"POL-201-3253","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e8efdd7e-5c0a-4637-92af-af93ff85b079.jpg?v=1788653628"},{"product_id":"sweep-hose-complete-180-280-380-480","title":"Polaris Genuine OEM Sweep Hose Tail Complete (180\/280\/380\/480)","description":"\u003cp\u003eThe Polaris B5 is the genuine sweep hose tail for the Polaris 180, 280, 380 and 480 pressure side cleaners, sold complete. The pack has 3-1\/2 ft of sweep hose, the B10 wear rings, the B15 clamp that fixes the tail to the cleaner body and a 9-100-3105 sweep hose scrubber, so it is a full replacement rather than a bare hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the tail does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs the cleaner moves, water jets from the tail and it whips across the floor, loosening fine dirt and stirring up debris the cleaner then vacuums into its bag. A worn tail whips less, loses its wear rings or splits, and the cleaner starts leaving a film of silt behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe B5 fits the Polaris 180, 280, 280 TankTrax, 380, TR28P and 480 Pro. It also works on the 3900 Sport, TR35P, 280 Black Max and 480 Pro Black Max, which are supplied from the factory with the black 39-500 tail; the white B5 with blue wear rings is the same part in a different colour.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine part, warranty kept\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an exact factory replacement with a 90 day limited manufacturer warranty, and using genuine Polaris parts helps maintain the limited warranty on the cleaner itself.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624922755284,"sku":"POL-201-3233","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2c279e4d-7eb2-408b-86d6-544729b64c28.jpg?v=1788653685"},{"product_id":"head-float-380-360-280-180","title":"Polaris Genuine OEM Head Float (380\/360\/280\/180)","description":"\u003cp\u003eThe Polaris A20 is the genuine head float for the Polaris 380, 360, 280 and 180 pressure side cleaners. It is the ballast float on top of the cleaner, and it is the first part to check when a Polaris starts running on its side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cracked, waterlogged or missing head float leaves the cleaner without the buoyancy that keeps it upright, so it rolls over and stops cleaning properly. A new float puts the balance back where it belongs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe float pushes onto the float mast and screws down. There is nothing else to it, and no tools are needed.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624929571028,"sku":"POL-201-3223","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a21e863d-6719-4be9-b7a0-cad480e811e3.png?v=1788654939"},{"product_id":"pressure-relief-valve-180-280-380-3900","title":"Polaris Genuine OEM Pressure Relief Valve for 180\/280\/380\/3900\/P39\/P40\/TR28P Pool Cleaners, 9-100-9002","description":"\u003cp\u003eThe Polaris 9-100-9002 is the genuine pressure relief valve that threads into the wall fitting on the Polaris 180, 280, 290 TankTrax, 380, 3900 Sport, P39, TR35P and TR28P pressure cleaners. It is the version with the black spring holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside is a spring set at the factory. When pressure in the cleaner line climbs above the spring tension, the spring lifts and vents the excess. If the old valve is worn, water pours out of the top of it even at normal pressure, and the cleaner loses speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve is threaded on the outside so you can tune it in the wall fitting housing. Screwed all the way in, the cleaner gets full pressure and runs fastest. Backing it out relieves pressure and slows the cleaner if it is skipping or climbing out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and warranty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGenuine Polaris parts carry a 90-day limited manufacturer warranty and keep the cleaner within its factory warranty terms. Confirm your cleaner is one of the models listed before ordering.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624934584532,"sku":"POL-201-1775","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5bcea819-ebe9-4c9f-be66-ee2a98f1aff8.jpg?v=1788655195"},{"product_id":"universal-wall-fitting-quick-disconnect-white-380-280-180-3900","title":"Polaris Universal Wall Fitting Quick Disconnect, White (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris D29 is the universal wall fitting quick disconnect for Polaris pressure side pool cleaners. It is the main body of the wall fitting: the white plastic piece that twist locks into the dedicated return line in the pool wall and that the cleaner hose clips onto.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits the popular Polaris models\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same D29 fitting serves the Polaris 180, 280, 380, 3900 Sport and 480 Pro. If the cleaner hose no longer snaps on firmly, or the fitting has cracked or turned brittle from sun and chlorine, this is the replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the OEM Polaris D29, sometimes written D-29. Other parts of the wall assembly, such as the connector assembly and pressure relief valve, are sold separately.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624960241876,"sku":"POL-201-7561","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3cef9e01-0aa5-4cf9-baa6-de60282bfe00.jpg?v=1788656649"},{"product_id":"sweep-hose-attachment-clamp-380-360-280-180","title":"Polaris Genuine OEM Sweep Hose Attachment Clamp (380\/360\/280\/180)","description":"\u003cp\u003eThe Polaris B15 is the genuine sweep hose attachment clamp for the Polaris 180, 280, 280 Tank Trax, 360 and 380 pressure side pool cleaners. It holds the sweep hose to the cleaner body so the tail stays attached while the cleaner works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA small part that gets used hard\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sweep hose whips constantly during a cycle, and all of that motion works on this clamp. Sun and chlorine make the plastic brittle over time. When the tail hose starts coming loose or the clamp shows a crack, replacing it takes a minute and avoids losing the hose in the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOEM Polaris part B15, plastic, sold individually. Related sweep hose parts, including the adjustment screw and the complete sweep hose tail, are available separately.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624965714132,"sku":"POL-201-3228","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_396a9572-947b-4ad4-af78-23d23e28bb77.png?v=1788656792"},{"product_id":"back-up-valve-case-kit-white-380-280-180","title":"Polaris Genuine OEM Back-up Valve Case Kit, White (380\/280\/180)","description":"\u003cp\u003eThe Polaris G54 is the white outer case for the back-up valve on Polaris 180, 280 and 380 pressure cleaners. It is the shell only. The internal assembly that makes the valve cycle stays with your existing G52 back-up valve and moves into this case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to buy the case\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBack-up valve cases crack from years of sun and chlorinated water, or from a hard landing on the deck. If the valve still cycles but the housing is split or leaking around the seam, a new case brings it back without paying for a complete valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need more than the case\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the back-up valve has stopped cycling, or cycles constantly, the fault is in the internal mechanism. A cracked case will not cause that, so check the internals first and order the complete back-up valve or the internal assembly if they are the problem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGenuine Polaris, made for the 180, 280 and 380. It is molded plastic in white to match the original.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624967647444,"sku":"POL-201-1445","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e15cc13b-a5e0-4918-b7d8-d085c74b1b2a.jpg?v=1788656851"},{"product_id":"pool-cleaner-feed-hose-kit","title":"Polaris Genuine OEM G5 Pool Cleaner Feed Hose Kit","description":"\u003cp\u003eThe Polaris G5 is the genuine feed hose kit for the Polaris 180, 280, 280 Tank Trax, 380 and 3900 Sport pressure cleaners. It is the full 30 ft run: two 10 ft feed hose sections, a 10 ft leader hose, the universal wall fitting and all of the swivels and nuts that join them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace the hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA feed hose ages in two ways. The hose itself goes stiff and holds a curve, which drags the cleaner off course, and the swivels start to leak or bind so the hose no longer untwists as the cleaner turns. Once either shows up, replacing individual pieces is a losing game, and a complete kit puts the whole run back to new.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is not in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris ships the G5 without the G52 back-up valve and without the 6-504-00 filter screen. Move yours over if they are in good shape, or add them to the order.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48624992813268,"sku":"POL-201-4091","price":258.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b55d9551-f3b3-442c-9a67-f802613be81e.jpg?v=1788661509"},{"product_id":"large-axle-with-guard-280-180","title":"Polaris Genuine OEM Large Axle with Guard (280\/180)","description":"\u003cp\u003eThe Polaris C66 is the large axle with sand guard for the Polaris 180 and Polaris 280 pressure side cleaners. It is the genuine Zodiac made OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA wheel broken completely off the cleaner. When the single side wheel or the front double side wheel snaps away at the axle, the axle itself is what has failed, and this is the part that puts it right.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe axle screws down to the frame of the cleaner. The wheel then slides onto the axle portion and runs on two bearings. Those bearings are not part of this listing, so it is worth checking them while the wheel is off and replacing them if they are worn.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625006608596,"sku":"POL-201-3256","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_970af38f-d203-473a-baac-0dcd5c0a244f.jpg?v=1788662060"},{"product_id":"swing-axle-kit-280-180","title":"Polaris Genuine OEM Swing Axle Kit (280\/180)","description":"\u003cp\u003eThe Polaris C36 is the genuine swing axle kit for the Polaris 180 and Polaris 280 pressure side cleaners, including the TR28P. It is the plastic axle that carries the cleaner wheels and lets them pivot as the unit moves over the pool floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cleaner that tracks poorly, sits crooked or has visible play at the wheels often has a worn or cracked swing axle. The axle is a routine replacement on older 180 and 280 units, and it is cheap enough to change on suspicion rather than chasing the symptom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWheels, the 180\/280 tune-up kit and the 280 factory rebuild kit are the usual companions. Check the parts diagram for your model to confirm what else is due.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625020174548,"sku":"POL-201-3248","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4026d242-b1b7-4470-9529-4ea0e524c03f.png?v=1788662256"},{"product_id":"filter-screen-uwf-qd","title":"Polaris Filter Screen for Universal Wall Fitting, UWF\/QD 6-504-00","description":"\u003cp\u003eThe Polaris 6-504-00 is the metal filter screen for the Polaris Universal Wall Fitting (UWF, part 9-100-9001) and the QD fitting. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe screen sits in the wall fitting and catches debris in the pressure line before it can reach the feed hose, the in line filter and the cleaner. A clogged screen is one of the most common reasons a Polaris pressure cleaner slows down, and a torn one lets grit through to parts that are far more expensive to replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the UWF used across the Polaris pressure cleaner line, including the 160, 165, 180, 280, 360, 380 and 3900. Pull the fitting, check the screen, and replace it if it is packed with debris that will not rinse out or has any holes in the mesh.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625022206164,"sku":"POL-201-7346","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_06add87e-e979-4fcb-8dd7-b078bbbb9773.jpg?v=1788662516"},{"product_id":"feed-hose-10-foot-380-280-180-3900","title":"Polaris 10 Foot Feed Hose (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris D45 is a genuine ten foot section of feed hose for the Polaris 180, 280, 380 and 3900 Sport pressure side pool cleaners. It is the hose that carries return line pressure from the wall fitting out to the cleaner, so a split or stiff section costs you cleaning power at the sweep head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne straight ten foot length of rubber feed hose, the same part Polaris ships on new cleaners. It joins to the rest of the hose run with the standard Polaris swivels, which are sold separately if yours are worn too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris lists the D45 for the 180, 280, 380 and 3900 Sport, and it also appears on the parts diagram for the 480 Pro, BlackMax and TankTrax. If your hose sections are cracked, kinked or leaking at the joints, replacing the bad section with a D45 is the fix.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625022664916,"sku":"POL-201-3273","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fba7bff6-8620-4199-898c-c5b1cb2f3bcd.png?v=1788662524"},{"product_id":"wheel-screw-plastic","title":"Polaris Genuine OEM Wheel Screw (Plastic)","description":"\u003cp\u003eThe Polaris C55 is the plastic wheel screw for the Polaris 180 and 280 pool cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis screw is what fastens the wheels to the cleaner. It works on both the larger and the smaller wheels on those two models. When one shears off or vibrates out in the pool, the wheel is free to work its way off the axle, and the washer and bearings usually go with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth keeping spare\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a small, inexpensive part on a cleaner that spends its life being dragged over concrete and plaster. Ordering a couple at once means the next one does not take the cleaner out of service. If a wheel has already come off, check the washer and the bearings before you put it back together.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625711972564,"sku":"POL-201-3251","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2e1d8d22-4daf-4d53-ba7e-8b212be97bfd.png?v=1788689025"},{"product_id":"feed-hose-nut-380-280-180-3900","title":"Polaris Genuine OEM Feed Hose Nut (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris D15 is the feed hose nut for the 180, 280, 380 and 3900 pressure side pool cleaners. Polaris also calls it the hose mender nut. It is the genuine Zodiac made part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe feed hose is built from sections joined by menders and swivels. This nut is the collar that draws each joint together and holds it there while the booster pump pushes water down the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA hose that separates as soon as the booster starts. When a nut splits or its threads strip, nothing holds the joint, and the cleaner loses drive while water sprays at the break.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the nut on its own. Hose sections and hose swivels are separate parts, and a hose that has been apart a few times is usually worth going over completely.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625722360020,"sku":"POL-201-3264","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_04ad2b9e-54af-4f41-8893-1db46d772251.png?v=1788690012"},{"product_id":"wheel-large-280-180","title":"Polaris Genuine OEM Wheel, Large (280\/180)","description":"\u003cp\u003eThe Polaris C6 is the large drive wheel for the Polaris 180 and Polaris 280 pressure side pool cleaners. It is the genuine OEM part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBearings are separate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wheel rides on two C60 wheel bearings, and those are not included. Since a worn bearing lets the wheel move on its axle and grinds a new wheel out of round, it is worth fitting fresh bearings whenever the wheel comes off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace the wheel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCracks at the hub, an oval hub bore, or a wheel that no longer holds the tire are the usual reasons. The large wheels are what put the cleaner through its pattern on the floor, so a failing wheel shows up as a cleaner that wanders, stalls or misses whole sections of the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the wheel itself. Tires, axles, wheel screws and bearings are separate Polaris parts, so check what else is worn while the cleaner is on the deck.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625723637972,"sku":"POL-201-3252","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bf52aed7-b8da-4b64-b4b0-4d236fbcf8e8.png?v=1788690063"},{"product_id":"small-idler-wheel-280-180","title":"Polaris Genuine OEM Small Idler Wheel (280\/180)","description":"\u003cp\u003eThe Polaris C16 is the small idler wheel for the Polaris 180 and Polaris 280 pool cleaners, molded in white plastic. It is the genuine OEM part, also listed as C-16.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnlike the large drive wheels, the idler wheel simply rolls along with the cleaner. Its job is to carry and guide, so a wheel that has seized, worn flat or cracked adds drag rather than stopping the cleaner outright. The symptom is usually uneven tracking, a cleaner that pulls to one side, or one that stalls in corners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 280 Black Max uses a different small idler wheel, so check which model you have. While the cleaner is on the deck, look at the wheel screws, washers and ball bearings too, since they wear on a similar schedule and reach the end together.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625723801812,"sku":"POL-201-3244","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_494397c3-a26e-4602-bc33-ccb7365987da.png?v=1788690084"},{"product_id":"turbine-ball-bearings-280-180","title":"Polaris Genuine OEM Turbine Ball Bearing (280\/180)","description":"\u003cp\u003eThe Polaris C80 is the genuine turbine ball bearing for the Polaris 180 and Polaris 280 pressure side cleaners. It is the bearing that holds the turbine drive shaft. Polaris also lists it as C-80 and PVC80. It is sold each.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything the cleaner does starts at the turbine. Water pressure spins it, the drive shaft carries that motion into the gearbox, and the wheels do the rest. The turbine bearings are what let the shaft turn without friction, and once they wear the whole chain gets sluggish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Polaris that has noticeably slowed down is the classic case. Before assuming the wall fitting, the hose or the booster pump is to blame, pull the turbine and check these bearings and the drive shaft. They are inexpensive, and replacing both at once usually brings the cleaner back up to pace.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625746018516,"sku":"POL-201-3259","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f9ef9dd8-bd8c-4d9f-a496-f42e5664bde9.jpg?v=1788690871"},{"product_id":"thrust-jet-kit-180-280-380-360","title":"Polaris Genuine OEM Thrust Jet Kit (180\/280\/380\/360), C131","description":"\u003cp\u003eThe Polaris C131 is the genuine OEM thrust jet kit for the Polaris 180, 280, 380 and 360 pool cleaners. One part number covers all four models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is supplied as a kit rather than as a single loose piece, so what arrives is the complete thrust jet set for the cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe thrust jet is a wear item and a normal part of a cleaner overhaul. If the cleaner is already apart for other work, fitting a fresh jet kit at the same time saves opening it up again later. Confirm the part with UPC 738919000278 before ordering.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625749721300,"sku":"POL-201-9567","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a7f5613c-768c-48fe-bb46-86b61a67e76f.png?v=1788691732"},{"product_id":"in-line-filter-assembly","title":"Polaris Genuine OEM In-Line Filter Assembly, 48-080","description":"\u003cp\u003eThe Polaris 48-080 is the genuine in-line filter assembly for Polaris pressure side cleaners, used on the 180, 280, 380, 480 Pro and 3900 Sport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the clear housing matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe in-line filter sits in the feed hose and catches grit before it reaches the cleaner. On this newer style the housing is clear, so a glance tells you whether the screen is loaded. That is the difference between cleaning it when it needs it and cleaning it when you happen to remember.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt is also a swivel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly acts as a hose swivel as well as a filter. On an older style hose you can pull the first swivel and put this in its place, which adds the filter without adding another joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe screen\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside is a large stainless steel screen. It rinses out and goes back in, and the screen itself is available separately if it is ever damaged.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625761485012,"sku":"POL-201-4801","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2a1b02c5-014c-46d3-9860-03d83b49b473.jpg?v=1788691986"},{"product_id":"leader-hose-10-foot-380-280-180-3900","title":"Polaris Genuine OEM Leader Hose, 10 Foot, (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris D50 is the genuine 10 foot leader hose for the Polaris 380, 280, 180 and 3900 pressure side cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes it the leader\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe leader is the section of the hose that attaches closest to the cleaner. Its rubber is more pliable than the sections that run back toward the wall, which is deliberate. That flexibility lets the cleaner turn and climb without the hose resisting it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it wears first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause it is the section doing all the flexing, the leader takes the most abuse. When a cleaner starts getting hung up, tracking oddly or stalling in a corner, a leader that has gone stiff, kinked or split is one of the first things worth inspecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne 10 foot rubber section, listed by Polaris for the 380, 280, 180 and 3900.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625784160468,"sku":"POL-201-3274","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7aadc362-2312-4c4d-80bc-d43d8d124a75.png?v=1788692180"},{"product_id":"collar-for-back-up-valve","title":"Polaris Genuine OEM Collar for Back-up Valve","description":"\u003cp\u003eThe Polaris G57 is the collar for the back-up valve on the Vac-Sweep 180, 280 and 380 pressure side cleaners, and on the 280 TankTrax. It is the genuine Polaris part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the back-up valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery pressure side Polaris relies on it. On a timed cycle the valve diverts water from the cleaner to the back-up jet, which pushes the unit backwards and out of whatever corner, step or ladder it has walked itself into. Without that reversal a cleaner can spend an entire cycle pinned in one place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe collar in particular\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe collar clamps the valve together on the feed hose. It is a small part, and when it cracks the valve loses its seal, weakens, or comes apart altogether. The symptom the owner sees is a cleaner that no longer backs itself out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the collar has failed, inspect the valve body and the O-ring set at the same time. Polaris sells both separately, and a valve that has been leaking has usually taken its seals along with it.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625785307348,"sku":"POL-201-1776","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_db0b2352-f954-4643-93fc-8d3e37d7f105.jpg?v=1788692346"},{"product_id":"axle-large-280-180","title":"Polaris Genuine OEM Axle, Large (280\/180)","description":"\u003cp\u003ePolaris C65 is the large rear axle for the 280 and 180 pool cleaners. It is the genuine Zodiac made part, molded in plastic, and it serves the rear wheel on the double wheel side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe failure it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWheels on a Polaris take a beating: they run against plaster, they carry the cleaner up walls, and the axle is the thin part in the middle of all of it. When an owner finds a wheel lying at the bottom of the pool or hanging off the frame, a broken axle is the usual cause rather than anything wrong with the wheel itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris uses more than one axle on these cleaners. This is the large axle without a guard, for the rear wheel on the double wheel side. There is a separate part for the large axle with a sand guard, so look at what came off before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cleaner that has broken one axle is usually due for a wider look. Check the remaining wheels, the bearings inside them and the tail sweep hose at the same time, since it saves a second teardown a month later.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625790845140,"sku":"POL-201-3255","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_53756150-d1d8-4584-95ef-1f157d401d08.png?v=1788700140"},{"product_id":"all-purpose-bag-180","title":"Polaris Genuine OEM All-Purpose Bag, 180","description":"\u003cp\u003ePolaris A16 is the all purpose filter bag for the Polaris 180 Vac Sweep automatic pool cleaner, and it is the genuine OEM replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll purpose means sand and silt\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris splits its 180 bags by what they are asked to hold. This is the sand and silt bag, the one for the fine material that settles on a floor between cleans. The leaf bag is a separate part, sized for bulk. Owners with heavy tree cover often keep both and swap by season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBags wear out. Seams open, mesh thins, and a bag that leaks silt is worse than no bag, because it stirs the floor and returns the load. If the cleaner still drives its pattern but the pool stays hazy, look at the bag first.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625806803156,"sku":"POL-201-3222","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_99b5039b-2006-40a4-a78a-84a293c1ee25.png?v=1788700321"},{"product_id":"drive-shaft-assembly-280-180","title":"Polaris Genuine OEM 280\/180 Drive Shaft Assembly","description":"\u003cp\u003ePolaris C86 is the drive shaft assembly for the Polaris 180 and 280 pool cleaners, supplied complete with the turbine shaft tubes. It is the genuine OEM part in molded plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe drive shaft is the link between the turbine and the wheels. Water spins the turbine, the shaft carries that motion down the drive train, and the wheels walk the cleaner across the pool. A worn or snapped shaft leaves you with a cleaner that has plenty of flow and no movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoing the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tubes come with the assembly, so there is nothing extra to source for the shaft itself. Polaris also sells a 180\/280 factory tune-up kit and the wheel bearings on their own, and both are worth looking at while the cleaner is open.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625808769236,"sku":"POL-201-4092","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f8c5db03-10d5-48f5-8f54-eaab36b95b5f.png?v=1788700363"},{"product_id":"universal-wall-fitting-collar-uwf","title":"Polaris Genuine OEM Universal Wall Fitting Collar (UWF), 6-500-00","description":"\u003cp\u003eThe Polaris 6-500-00 is the universal wall fitting collar, the white plastic ring that anchors the UWF into the pool wall. It is the genuine Zodiac made Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne side of the collar carries 1-1\/2 in. threads that go into the pool wall. The other side has the two nubs that the bayonet fitting on the cleaner hose locks onto. Everything the hose attaches to depends on those two nubs being intact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the bayonet will not lock, spins free, or the nubs have snapped off, the collar is the part to change rather than the whole wall fitting. It serves the Polaris 180, 280, 280 Tank Trax, 360, 380, 3900 Sport and 480 Pro, so one small part covers most of the pressure side range.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625813487828,"sku":"POL-201-7348","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_be06913b-4a15-423e-8f61-7b904767740f.png?v=1788700453"},{"product_id":"back-up-valve-case-kit-black-380-280-180","title":"Polaris Genuine OEM Back-up Valve Case Replacement Kit, Black","description":"\u003cp\u003eThe Polaris G64 is the black back-up valve case kit for the 180, 280 and 380 pool cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShell only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is the outer case of the back-up valve. The internals that actually redirect water are not included, so it is the right part when the housing itself has failed and the mechanism inside is still good. If water is escaping past the mechanism, the complete back-up valve kit is the item to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck which valve you have\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is listed for the 180, 280 and 380 cleaners, and it is also described as the case kit for the G62 back-up valve on 380 and 280 models. Compare your existing valve against the part before ordering so the halves line up.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48625840423124,"sku":"POL-201-3406","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_acea482b-e922-425f-a6ac-6a66cd56cb89.png?v=1788701290"},{"product_id":"lock-washer-for-c36-280-180","title":"Polaris Genuine OEM Lock Washer for C36 (280\/180)","description":"\u003cp\u003eThe Polaris C45 is the lock washer that belongs with the C36 swing axle assembly on the Polaris 180 and 280 pressure side pool cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe swing axle carries load every second the cleaner is running, and vibration slowly works fasteners loose. The lock washer holds tension against the fastener so the axle stays where it was set. Once a washer has been flattened by a previous assembly it will not do that job again reliably.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFit a new one any time the swing axle assembly is taken apart, and any time you find the axle hardware loose. It is a small part that saves a repeat repair.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48626105024724,"sku":"POL-201-3250","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bd72f437-6fe8-4aff-bfff-1cf79b7b533f.png?v=1788704845"},{"product_id":"mechanism-for-g52-polaris-back-up-valve-380-280-180-3900","title":"Polaris Genuine OEM Mechanism for G52 Back-up Valve (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris G53 is the internal mechanism for the G52 back-up valve, the valve that gives the Polaris 180, 280, 380 and 3900 pressure cleaners their reverse cycle. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the reverse cycle matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pressure side cleaner has no way to see where it is. What keeps it from parking in a corner or hanging on a step is the back-up valve, which every few minutes diverts water and drives the cleaner backwards for a short burst. When the mechanism inside the valve wears out, the cleaner either stops reversing or reverses so often it never covers the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRebuild rather than replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mechanism is the part that wears; the valve housing usually outlives it. If the body and hose fittings are sound, fitting a new G53 brings the valve back for a fraction of the cost of a complete assembly.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48626105352404,"sku":"POL-201-3370","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c342d5de-f2eb-40c2-88b5-4b354b381f87.png?v=1788704854"},{"product_id":"pressure-tester-stick-380-280-180","title":"Polaris Genuine OEM Pressure Tester Stick (380\/280\/180)","description":"\u003cp\u003eThe Polaris G35 is the pressure tester stick for the Polaris 380, 280 and 180 pressure side pool cleaners. It is the genuine OEM part, supplied without a gauge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy pressure comes first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pressure side cleaner does everything it does on the water the booster pump sends it. When one crawls, stalls partway through a cycle, will not climb the wall or will not sweep, the honest first question is how much pressure is actually reaching the hose. The tester stick is what lets you answer it instead of guessing your way through wheels, bearings and back-up valves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the tester stick alone. A gauge fits to it and gauges are sold separately, so if you are building a tester from scratch you will need both. If your existing stick is cracked, stripped or leaking at the fitting, this replaces it.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48626119868628,"sku":"POL-201-3282","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f9931622-3328-4f8e-82fb-c8450fb10815.jpg?v=1788705093"},{"product_id":"d10-float-feed-hose","title":"Polaris Genuine OEM Feed Hose Float for 180\/280\/380 Pool Cleaners","description":"\u003cp\u003eThe Polaris D10 is the feed hose float used on the Polaris pressure side cleaners. It is the genuine Polaris part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe float clips onto the feed hose and holds it up in the water. Without it the hose sinks and drags along the pool floor, which adds resistance, pulls the cleaner away from its pattern and leaves parts of the pool uncleaned. Floats are consumable: they crack, they get lost, and a hose with half its floats missing behaves noticeably worse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich cleaners\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source is not fully consistent on the model list. The product notes name the Polaris 180, 280 and 380, while the listing details also include the 360 and the 3900. Compare the float against one already on your hose if you are unsure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a single float. A complete feed hose normally carries several of them spaced along its length, so count what needs replacing before you order.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48626293473492,"sku":"POL-201-3263","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2692bd67-a4a5-4175-8b6d-57c38491feb1.jpg?v=1788707763"},{"product_id":"axle-plate-280-180","title":"Polaris Genuine OEM Axle Plate (280\/180)","description":"\u003cp\u003eThe Polaris C70 is the axle plate for the Polaris 180 and Polaris 280 pool cleaners. It is the genuine factory part, made in metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate is used with the large axle with sand guard, part C-66, and with the large axle for the rear wheel only, part C-65. Identify which of those two axles is in the position you are working on so the rebuild goes back together correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA plate and the axle it carries wear against each other. If the plate is worn enough to replace, the axle is worth a close look before the wheel goes back on, since reaching both again means taking the same assembly apart twice.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48626508497108,"sku":"POL-201-3257","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1d505faf-d074-45c3-a3eb-58c192bd5452.png?v=1788711102"},{"product_id":"wheel-washer-plastic-280-180","title":"Polaris Genuine OEM Wheel Washer for 280\/180 Pool Cleaners","description":"\u003cp\u003eThe Polaris C64 is the plastic wheel washer used on the Polaris 180 and 280 pressure side pool cleaners. It is the genuine factory part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmall part, real job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe washer spaces the wheel on its axle. When it is fresh, the wheel turns freely and stays square to the frame. When it has worn thin, the wheel gains side play, and that play works its way through to the bearings and the axle, which cost more to replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplace them as a set\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery washer on the cleaner has done the same hours in the same water. If one is worn, the rest are close behind, so change them all while the wheels are already off. It is worth looking at the bearings and wheel screws in the same session.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48626697109716,"sku":"POL-201-3254","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_071cf004-37a1-4164-9aff-fed61a4de38d.png?v=1788713799"},{"product_id":"screw-10-32x3-8-ss-pan-head-380-360-280-180-3900","title":"Polaris Genuine OEM Screw 10-32x3\/8\" SS Pan Head (380\/360\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris C40 is the stainless steel pan head screw used across the Vac-Sweep cleaner line, 10-32 thread and 3\/8 in. long. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris calls for 20 of these on the cleaners it fits: the Vac-Sweep 180, 280, 360 and 380, the 280 TankTrax and 480 PRO, and the 3900 Sport. They hold housings, covers and brackets together throughout the body of the cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese screws live in chlorinated water for their whole service life. A plated substitute will corrode, swell in the plastic boss and end up drilled out. Stainless is the reason the originals come out cleanly years later, so it is worth replacing like for like when one goes missing.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48626993758420,"sku":"POL-201-3249","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_327a4f5a-acd1-4b9d-abc8-b1ac61831fe1.jpg?v=1788718856"},{"product_id":"polaris-280-180-wheel-drivetrain-set","title":"Polaris Genuine OEM 280\/180 Wheel Drivetrain Set","description":"\u003cp\u003eThis is the genuine OEM wheel drivetrain set for the Polaris 280 and Polaris 180 pressure side pool cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wheel drivetrain is what turns water pressure into movement. Everything else on the cleaner can be in good order, but if the drive components are worn the cleaner will not cover the pool properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 280 or 180 that stalls, drags, wanders off its pattern or leaves whole sections of the floor untouched is usually telling you the drive parts are past their service life. The set is supplied together, which saves ordering the pieces one at a time.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48627583975636,"sku":"POL-280-WHEEL-TIRE-BEARING-SET","price":185.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_891a6f13-3986-493c-a725-5889edaece6b.png?v=1788723905"},{"product_id":"adapter-coupling-3-4-x-1-1-2","title":"Polaris Genuine OEM Adapter Coupling 3\/4\" x 1-1\/2\"","description":"\u003cp\u003eThe Polaris G9 is the adapter coupling that bridges two generations of Polaris plumbing. It takes the old style 3\/4 inch Polaris line and brings it up to the 1-1\/2 inch connection the current cleaners expect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder installations put a 3\/4 inch female threaded fitting in the pool wall. New Polaris cleaners ship with the 9-100-9001 wall fitting, which is the larger style and will not thread into it. Rather than opening the wall and repiping, the G9 threads into the existing 3\/4 inch fitting and gives you the 1-1\/2 inch connection for the newer wall fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the Polaris OEM coupling, part G9. It is the same part the factory supplies for this upgrade, so the thread form and seal are what the rest of the assembly is built around.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48627639320788,"sku":"POL-201-7665","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_39528076-dbfb-44f0-9e5f-ba0ba2c3bdef.png?v=1788725727"},{"product_id":"quick-disconnect-female-plt","title":"Polaris Genuine OEM Quick Disconnect Female for 180 Cleaner","description":"\u003cp\u003eThe Polaris D26 is the female half of the quick disconnect used on the Polaris 180 pressure pool cleaner. It is the genuine Polaris part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe quick disconnect is the joint that lets the cleaner come off the feed line without tools, for storage, for a swim or for service. It carries pressurized water every time the cleaner runs, and it takes the strain each time somebody pulls the cleaner out of the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDisconnects wear out. The plastic loses its grip, the sealing surfaces score, and the joint starts spraying or will not lock at all. That costs the cleaner the pressure it needs to work properly, so the fitting is worth replacing rather than taping. This is the female side; the male plug is a separate Polaris part, so identify which half has failed before ordering.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48627846545620,"sku":"POL-201-3269","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8c29328b-0b44-48b9-872d-36fbeb341c39.jpg?v=1788728207"},{"product_id":"hose-barb-strainer-housing-180","title":"Polaris Genuine OEM Hose Barb\/Strainer Housing (180)","description":"\u003cp\u003eThe Polaris D31 is the hose barb and strainer housing for the Polaris 180 pool cleaner. It is the genuine part, molded in clear plastic, and it comes as one piece with the barb and the housing together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing is where the cleaner hose ties into the unit and where the strainer sits in the water path. Because it is clear, you can see whether the strainer is loaded with debris without taking anything apart. A housing that has cracked or split at the barb lets water escape before it reaches the cleaner, and a 180 losing pressure that way sweeps slowly or wanders instead of running its pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the housing only. The tube strainer that fits inside is a separate Polaris part, so replace both if the strainer is also damaged. Match the part number on your existing housing first, since Polaris cleaner families do not share the same fittings.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48627946258644,"sku":"POL-201-3270","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3fb2f66e-535e-4195-950c-fb85a5234f8f.png?v=1788730540"},{"product_id":"hose-clamp-for-water-management-system","title":"Polaris Genuine OEM Hose Clamp for Water Management System, 6 Pack, 9-100-7170","description":"\u003cp\u003ePolaris 9-100-7170 is the genuine hose clamp for the water management system on the Polaris 180, 280, 360 and 380 pool cleaners. It comes six to a pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fails and why\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clamps on a pressure side cleaner hold hose joints that see pressurized water every time the booster pump runs, and they sit in sun and chlorinated water for years. When one gives up you get a weeping joint or a hose that works loose, and the cleaner loses the pressure it needs to drive and sweep properly. Owners often chase the problem at the pump or the hose before checking the clamps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a pack of six\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery clamp on the cleaner has aged the same amount. If one has failed, the others are on the same clock, and you already have the assembly apart. Fitting the full set during a tune up means you are not back at the same job in a month.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48628772012244,"sku":"POL-201-3325","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e168c895-e775-4278-a9fb-9a8dff6ccebd.png?v=1788750425"},{"product_id":"orifice-tip-with-orifice-tip-guard-380-280-180-3900","title":"Polaris Genuine OEM Orifice Tip with Orifice Tip Guard (380\/280\/180\/3900)","description":"\u003cp\u003ePolaris B25 is the genuine sweep hose orifice tip supplied together with its orifice tip guard. It is the nozzle at the working end of the tail sweep on the Polaris pressure side cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the tip matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tail sweep is not driven by anything mechanical. Water leaves the orifice as a jet, and the size of that opening is what makes the hose whip across the floor and scrub. As the plastic wears, the opening grows, the jet softens and the tail goes limp. The cleaner still drives its pattern but the sweep stops doing its share of the work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the fitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe product title covers the Polaris 380, 280, 180 and 3900. The broader listing for this part also names the 280 Tank Trax, the 3900 Sport and the 480 Pro. Those two lists do not agree exactly, so compare the tip on your own cleaner before you order.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48628772241620,"sku":"POL-201-3231","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6be8656c-7fbb-4b48-8671-bf84c4c1608c.png?v=1788750429"},{"product_id":"quick-disconnect-plug-mpt","title":"Polaris Genuine OEM Quick Disconnect Plug MPT","description":"\u003cp\u003eThe Polaris D23 is the quick disconnect plug from the old style Polaris wall fitting, a plastic body with a 3\/4 in male pipe thread. It is the genuine Polaris part and is listed for the Polaris 180 cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote on the o-rings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe product name still refers to 2 o-rings. Those o-rings are no longer supplied with the plug, so if yours are flattened or split, add them to the order separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRepair or convert\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYou have two routes here. Replacing the plug alone keeps the existing old style fitting in the wall, which is the quick fix. The alternative is to move the whole fitting over to the current Polaris UWF wall fitting, and that conversion also calls for the Polaris adapter coupling that takes the 3\/4 in male thread up to 1-1\/2 in.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48628781678804,"sku":"POL-201-3267","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1474bc99-fe1e-422a-b21e-bde814f26584.jpg?v=1788750545"},{"product_id":"adjustment-screw-sweep-hose-380-360-280-180","title":"Polaris Genuine OEM Adjustment Screw, Sweep Hose (380\/360\/280\/180)","description":"\u003cp\u003eThe Polaris B20 is the genuine sweep hose adjustment screw for the 180, 280, 280 Tank Trax, 360 and 380 pressure side pool cleaners. It is the part that meters how much flow is sent to the tail sweep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tail sweep is what a Polaris uses to lift debris off the floor and out of corners ahead of the cleaner. The adjustment screw decides how much of the incoming flow is diverted to that hose. Too little and the sweep barely stirs, too much and the cleaner loses drive while the tail thrashes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe screw lives in the water path and wears. If the sweep will not behave no matter how it is set, the screw itself is the usual culprit. It is a small enough part that most techs replace it as a matter of course during a cleaner overhaul, along with the sweep hose and its attachment clamp.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48628933329108,"sku":"POL-201-3230","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_39fadc23-1d80-4ef6-ba75-10bcbea00f38.jpg?v=1788758113"},{"product_id":"feed-hose-with-floats","title":"Polaris Genuine OEM White Feed Hose with Floats for 380\/280\/180, 9-100-3104","description":"\u003cp\u003eThis is the genuine Polaris 9-100-3104 feed hose with floats, a white 10 ft section used on the Polaris 380, 280 and 180 pressure side cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the feed hose does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pressure side cleaner is driven by water pushed to it through the feed hose. The hose is not a passive tether, it is the supply line, so a split, a kink or a section that has gone stiff shows up straight away as a cleaner that wanders, slows down or stops climbing walls. The floats are there to hold the run up in the water so it does not drag along the floor, tangle on itself or mark the finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing one section\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeed hose runs are built from sections, which means damage in one place does not have to mean a whole new run. Look for the section that has hardened, split at a swivel or lost its floats, and change that one.\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":48629147762900,"sku":"POL-201-3348","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_77a8f37e-0c8e-44e1-a2e1-ea86fc6f3b0d.png?v=1788759986"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/polaris-180-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}