{"title":"Polaris 380 Parts","description":"\u003cp\u003eReplacement parts for Polaris 380, genuine OEM and compatible aftermarket.\u003c\/p\u003e","products":[{"product_id":"factory-tune-up-kit-380-360","title":"Polaris Genuine OEM 380\/360 Factory Tune-Up Kit","description":"\u003cp\u003eThe Polaris 9-100-9010 factory tune-up kit is the one box way to bring a tired Polaris 380 or 360 back to full speed. It rebuilds the entire drive train, from the turbine that catches the water to the tires that grip the pool, and adds a new all purpose bag on top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gets replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree C10 tires, two double side wheels and one single side wheel, the transfer pulley and drive shaft assembly, the small and large belt kit, the drive train gear kit with its turbine bearing, front and rear axle block assemblies, the upper turbine housing, eight ball bearings with three bearing shields, three hub caps, ten stainless steel E-clips, six hose clamps for the water management system, two o-rings for the in-head timer and feed pipe assembly, and a sweep hose scrubber. All of it is genuine Polaris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is for the Polaris 380 and 360, including the 380 Black Max and 360 Black Max, and the TR35P and TR36P. The 180 and 280 use a different kit.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624549167316,"sku":"POL-201-2173","price":227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c890ace2-a2e8-4b58-a3ae-f01e3fcb9a6c.jpg?v=1788643284"},{"product_id":"frame-complete-360-380","title":"Polaris Genuine OEM Frame Complete (360\/380)","description":"\u003cp\u003eThe Polaris 9-100-1005 is the complete internal frame for the Polaris 360 and 380 pressure side pool cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003eThe frame is the backbone of the cleaner. The drive train, transfer pulley, wheels and body all mount to it, so a cracked or distorted frame shows up as wheels that will not track or a body that will not sit right. Replacing the frame with this complete assembly is usually cheaper than replacing the cleaner.\u003c\/p\u003e\u003cp\u003eThe drive gears, pulleys, bearings and wheels are sold separately. Check the Polaris 360 or 380 parts diagram to confirm which other parts you need for the rebuild.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624870523092,"sku":"POL-201-3323","price":113.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0d8042b8-7a79-42db-a681-0deb774d855d.jpg?v=1788647632"},{"product_id":"sweep-hose-scrubber","title":"Polaris Genuine OEM Tail Sweep Hose Scrubber","description":"\u003cp\u003eThe Polaris 9-100-3105 is the genuine tail sweep scrubber for Polaris pressure cleaners. It fits securely over the tip of the sweep hose and does two jobs at once: it scrubs pool surfaces, corners and steps as the tail moves, and it keeps the hose tip from wearing against the pool finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the Polaris 180, 280, 360, 380, 480 Pro and 3900 cleaners. This is a single scrubber, 3 in. long by 2 in. by 2 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eScrubbers are wear items. Replace this one when it begins to thin, tears, or no longer grips the hose tip securely.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624879730900,"sku":"POL-201-2174","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_58e05f81-1767-463a-af16-9d0429b97904.jpg?v=1788648768"},{"product_id":"back-up-valve-complete-white-180-280-380-3900","title":"Polaris Genuine OEM Back-up Valve, Complete, White (180, 280, 380, 3900)","description":"\u003cp\u003eThe Polaris G52 is the complete back-up valve for Polaris pressure cleaners: the case, the timer mechanism inside it and the case o-rings, in white. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve sits inline on the feed hose, 5 to 6 ft back from the cleaner head. Every 5 to 10 minutes its timer diverts water out of a jet, and the thrust pulls the cleaner away from whatever it has parked against, a step, the main drain, a wall or a ladder, so it can carry on cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA failed valve shows up one of two ways: the jet runs constantly and the cleaner never settles, or the jet never fires and the cleaner stays stuck for long stretches. Either way the G52 is the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the Polaris 180, 280, 380, 3900 Sport, TR28P, 280 TankTrax and 480 Pro. The arrow on the hose barb points toward the cleaner. If you only need part of it, the mechanism (G53), case kit (G54) and collar (G57) are available separately.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624880976084,"sku":"POL-201-7571","price":116.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7fb222ba-ef54-4dc8-b640-14c1cf17d575.jpg?v=1788648961"},{"product_id":"wall-fitting-connector-assembly-380-280-180-3900","title":"Polaris Wall Fitting Connector Assembly (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris 9-100-9001 is the complete universal wall fitting connector assembly that joins a pressure side cleaner's feed hose to the dedicated return line in the pool wall. It is the current design supplied on every new Polaris cleaner, and it adapts to the older 180, 280, 380, 3900 Sport and 480 Pro without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is everything at the wall end: the universal wall fitting (6-500-00), the pressure relief valve (9-100-9002), the UWF\/QD o-ring (6-505-00), the D29 quick disconnect body and both the red and blue restrictor discs (10-112-00) used to trim the feed pressure to the cleaner. The molded plastic parts are the genuine Polaris pieces, which keeps the cleaner's manufacturer warranty intact, and the assembly carries its own 90 day limited warranty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly threads into a 1-1\/2 in. fitting in the pool wall. If your pool still has the original 3\/4 in. return fitting, you will also need a 3\/4 in. x 1-1\/2 in. adapter coupling. Note that since March 2015 Polaris no longer includes the 6-504-00 filter screen, because current cleaners and feed hoses have an inline filter. If you still want the wall screen, add it separately.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624883400916,"sku":"POL-201-1441","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_975910ea-b2fe-48b3-b99c-26d020d2530d.jpg?v=1788649504"},{"product_id":"back-up-valve-kit-complete-black","title":"Polaris Genuine OEM Back-up Valve Kit Complete, Black","description":"\u003cp\u003eThe Polaris G62 is the genuine complete back-up valve kit in black for the 280, 380 and 480 BlackMax pressure cleaners. It fits inline on the feed hose and is the part that keeps the cleaner from parking itself in a corner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAbout every 3 minutes the valve opens for about 30 seconds. The jet of water pulls the cleaner backward, freeing it from steps, corners and tight spots and sending it off in a new direction. That regular reversing is what gives the cleaner full coverage of the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the cleaner gets stuck and stays there, or you never see it back up, the valve has usually stopped cycling. The G62 is the whole assembly, so it swaps in without rebuilding the old one. The feed hose itself is sold separately.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624884416724,"sku":"POL-201-3405","price":132.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_04b2630c-91b7-47d8-b550-b502e6358fc5.png?v=1788649624"},{"product_id":"all-purpose-bag-380-360-velcro-closure","title":"Polaris Genuine OEM All-Purpose Bag (380\/360) Velcro Closure","description":"\u003cp\u003eThe Polaris 9-100-1014 is the genuine all purpose debris bag for the Polaris 380 and 360 pressure side cleaners, with the original Velcro closure. It also fits the 380 Black Max, 360 Black Max, TR35P and TR36P.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it catches\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe all purpose mesh is the everyday bag for these cleaners: leaves, twigs, bugs and general debris, with enough flow through the fabric that the cleaner keeps its drive pressure as the bag fills. When a bag tears or the mesh wears thin, debris washes back out into the pool and the cleaner looks like it has stopped working. A new bag fixes that.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine Polaris\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the OEM part from Polaris, made for these cleaners rather than adapted to them, so it attaches the same way as the bag it replaces and holds its shape in use.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624886448340,"sku":"POL-201-3327","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_38327d9d-9e2d-47ff-ab5e-a3e1423e884a.jpg?v=1788649949"},{"product_id":"feed-hose-assembly-with-back-up-valve-and-in-line-filter","title":"Polaris Genuine OEM Complete 31-Foot Feed Hose with Backup Valve and In-Line Filter","description":"\u003cp\u003eThis is the complete Polaris feed hose, part 48-070, packaged as one assembly that runs from the pool wall to the cleaner. It fits the Polaris 180, 280, 280 Tank Trax, 380 and 3900 Sport pressure side cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo 10 ft sections of feed hose and one 10 ft section of leader hose make up the 31 ft run. The universal wall fitting, swivels and nuts are included, along with the new style in-line filter assembly and the backup valve. Polaris installs the backup valve inline before it leaves the factory, so the pieces arrive in the order they belong.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the whole hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeed hoses wear at the swivels, kink at the sections and lose their in-line filter screens over the years. Replacing the set restores the cleaner to the way it left the factory, with a fresh backup valve to pull it off steps and out of corners, and saves hunting down each piece separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hose is white.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624917807316,"sku":"POL-201-4812","price":298.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bcb34f16-5d88-4e3b-8607-40179af77605.jpg?v=1788653259"},{"product_id":"tire-maxtrax-180-280-380-360","title":"Polaris Genuine OEM Tire, MaxTrax (180\/280\/380\/360)","description":"\u003cp\u003eThe Polaris C10 is the MaxTrax all purpose tire for the Polaris 180, 280, 360 and 380 pressure side cleaners. It is the original factory service part, new and sealed in an individual Polaris package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGrip that is kind to the finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe MaxTrax tread is designed for maximum traction on the pool floor and walls without scuffing plaster, tile or vinyl. That is what lets the cleaner climb and keep its pattern without leaving marks behind.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tire bolts to the backboard with four bolts. Hardware is not included, so keep the existing bolts when you pull the old tire. Each tire measures 6.5 in. by 6.5 in. by 1 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTires are a wear item. Change them when they no longer fit the wheel snugly, when the rubber has gone dry and brittle, or when they start to discolor or swell. Worn tires slip, and a slipping cleaner stops climbing and misses sections of the pool.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624918233300,"sku":"POL-201-3234","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1a05b40f-2c01-4b6c-baa9-49bb06cf3bf7.png?v=1788653348"},{"product_id":"tire-black","title":"Polaris Genuine OEM Tire, Black","description":"\u003cp\u003eThe Polaris C11 is the genuine black replacement tire for the Polaris 180, 280, 360 and 380 pressure side pool cleaners, and it also fits the Quattro P40 and Quattro Sport. Tires are the part of a Polaris that wears first, and worn ones let the cleaner spin in place instead of climbing and covering the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe C11 is the standard tire for these models. Polaris also offers a MaxTrax tire for the 180, 280, 360 and 380, so check which style you are replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tire stretches off and on the wheel by hand with no tools. Replace one per worn wheel, and replace them as a set when they are all thin so the cleaner tracks evenly.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624920133844,"sku":"POL-201-6512","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1f568f87-58be-4845-8c82-ae8a6485e26d.png?v=1788653484"},{"product_id":"hose-swivel","title":"Polaris Genuine OEM Hose Swivel for 380\/280\/180 Pool Cleaners","description":"\u003cp\u003eThe Polaris D20 is the genuine hose swivel for Polaris pressure side cleaners. It is the plastic coupling that joins one section of feed hose to the next and lets the sections rotate independently, which is what keeps the hose from twisting into a coil as the cleaner turns around the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe D20 fits the Polaris 180, 280, 280 TankTrax, 380, 3900 Sport and 480 Pro.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA hose that keeps kinking, a cleaner that stalls in one corner, or a swivel that no longer turns freely by hand all point to a worn swivel. Swivels also crack with age and start leaking pressure, which cuts the cleaner speed. They are inexpensive, so replace any that are stiff or cracked rather than waiting for them to fail.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624920166612,"sku":"POL-201-3265","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_59a6e31b-9569-4f26-9f12-221656e4fa3a.jpg?v=1788653489"},{"product_id":"sweep-hose-complete-180-280-380-480","title":"Polaris Genuine OEM Sweep Hose Tail Complete (180\/280\/380\/480)","description":"\u003cp\u003eThe Polaris B5 is the genuine sweep hose tail for the Polaris 180, 280, 380 and 480 pressure side cleaners, sold complete. The pack has 3-1\/2 ft of sweep hose, the B10 wear rings, the B15 clamp that fixes the tail to the cleaner body and a 9-100-3105 sweep hose scrubber, so it is a full replacement rather than a bare hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the tail does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs the cleaner moves, water jets from the tail and it whips across the floor, loosening fine dirt and stirring up debris the cleaner then vacuums into its bag. A worn tail whips less, loses its wear rings or splits, and the cleaner starts leaving a film of silt behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe B5 fits the Polaris 180, 280, 280 TankTrax, 380, TR28P and 480 Pro. It also works on the 3900 Sport, TR35P, 280 Black Max and 480 Pro Black Max, which are supplied from the factory with the black 39-500 tail; the white B5 with blue wear rings is the same part in a different colour.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine part, warranty kept\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an exact factory replacement with a 90 day limited manufacturer warranty, and using genuine Polaris parts helps maintain the limited warranty on the cleaner itself.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624922755284,"sku":"POL-201-3233","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2c279e4d-7eb2-408b-86d6-544729b64c28.jpg?v=1788653685"},{"product_id":"belt-kit-small-and-large-380-360","title":"Polaris 380 and 360 Replacement Belt Kit, Small and Large","description":"\u003cp\u003eThe Polaris 9-100-1017 belt kit holds the small belt and the large belt that drive the wheels on the Vac-Sweep 380 and Vac-Sweep 360 pressure side cleaners. Both belts are genuine Polaris rubber parts, so they match the pulleys the cleaner was built with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace them as a pair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe two belts wear together. Fitting only the one that broke leaves a stretched partner that will slip or snap soon after, and the cleaner is back on the bench. The kit gives you both for one job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms to look for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 380 or 360 that crawls, stalls in corners or spins its wheels while the water pressure is fine usually has tired belts. Open the body, check the belts for cracks, glazing or slack, and replace them if they look worn.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624924360916,"sku":"POL-201-6509","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c17a9d0f-64ab-41fd-8880-52f49490af7e.png?v=1788653705"},{"product_id":"complete-feed-hose-kit-black-w-o-back-up-valve","title":"Polaris Complete Feed Hose Kit, Black, without Back-up Valve","description":"\u003cp\u003eThe Polaris G6 is the complete black feed hose kit for the Polaris 280 BlackMax and 380 BlackMax pressure side cleaners. It is the genuine Polaris part, and it ships without the back-up valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the complete kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeed hose wears in more than one place at once: sun hardens it, kinks form at the same spots and leaks start at the joints. Replacing the whole run in one go beats chasing sections, and the black hose matches the BlackMax cleaner body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the back-up valve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit does not include the back-up valve. If your existing valve still cycles, carry it over. If it has stopped, Polaris sells a complete black back-up valve kit separately, and it is worth ordering with the hose so the whole line is fresh.\u003c\/p\u003e\u003cp\u003eSingle 10 ft black feed hose sections are also available on their own for a spot repair.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624928358612,"sku":"POL-201-3404","price":273.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6900e657-369b-41ae-8109-52ee916e57d6.jpg?v=1788654867"},{"product_id":"ball-bearing-380-360-340-3900","title":"Polaris Genuine OEM Wheel Ball Bearing","description":"\u003cp\u003eThe Polaris 9-100-1108 is the genuine wheel ball bearing for the Polaris 380, 360, 340 ATV, 3900 Sport, TR35P and TR36P pressure side cleaners. It is sold individually; most of these cleaners carry eight, one on each side of each wheel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWorn bearings show up as wheels that have gone loose and rock side to side. The cleaner slows down, struggles to climb or wander the way it used to, and generally feels tired. New bearings take the play out of the wheel assembly and bring the cleaner's speed and agility back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bearing is a hidden internal part and the same one fits both black and white Polaris wheels. Genuine Polaris bearings are made to the original specification, keep the cleaner's manufacturer warranty intact, and carry their own 90 day limited warranty from purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCount the wheels and buy eight for a full refresh on a 360 or 380; replacing all of them at once is the sensible approach since they wear together.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624928915668,"sku":"POL-201-7306","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ceb22ea8-bd1c-4926-99d0-4c1faae278f7.png?v=1788654926"},{"product_id":"head-float-380-360-280-180","title":"Polaris Genuine OEM Head Float (380\/360\/280\/180)","description":"\u003cp\u003eThe Polaris A20 is the genuine head float for the Polaris 380, 360, 280 and 180 pressure side cleaners. It is the ballast float on top of the cleaner, and it is the first part to check when a Polaris starts running on its side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cracked, waterlogged or missing head float leaves the cleaner without the buoyancy that keeps it upright, so it rolls over and stops cleaning properly. A new float puts the balance back where it belongs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe float pushes onto the float mast and screws down. There is nothing else to it, and no tools are needed.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624929571028,"sku":"POL-201-3223","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a21e863d-6719-4be9-b7a0-cad480e811e3.png?v=1788654939"},{"product_id":"pressure-relief-valve-180-280-380-3900","title":"Polaris Genuine OEM Pressure Relief Valve for 180\/280\/380\/3900\/P39\/P40\/TR28P Pool Cleaners","description":"\u003cp\u003eThe Polaris 9-100-9002 is the genuine pressure relief valve that threads into the wall fitting on the Polaris 180, 280, 290 TankTrax, 380, 3900 Sport, P39, TR35P and TR28P pressure cleaners. It is the version with the black spring holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside is a spring set at the factory. When pressure in the cleaner line climbs above the spring tension, the spring lifts and vents the excess. If the old valve is worn, water pours out of the top of it even at normal pressure, and the cleaner loses speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve is threaded on the outside so you can tune it in the wall fitting housing. Screwed all the way in, the cleaner gets full pressure and runs fastest. Backing it out relieves pressure and slows the cleaner if it is skipping or climbing out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and warranty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGenuine Polaris parts carry a 90-day limited manufacturer warranty and keep the cleaner within its factory warranty terms. Confirm your cleaner is one of the models listed before ordering.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624934584532,"sku":"POL-201-1775","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5bcea819-ebe9-4c9f-be66-ee2a98f1aff8.jpg?v=1788655195"},{"product_id":"sand-silt-bag-380-360","title":"Polaris Genuine OEM 380\/360 Sand \u0026 Silt Filter Bag","description":"\u003cp\u003eThis is the genuine Polaris sand and silt filter bag for the 380 and 360 pressure side cleaners, part number 9-100-1015. Its finer weave is made for pools that collect sand, silt and other small particles, the kind of debris a standard bag can let pass straight back into the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose this bag for pools near beaches, in dusty climates, after a storm or any time the floor shows a fine layer rather than leaves. For heavy leaf loads the all purpose zipper bag holds more, so many owners keep one of each and swap by season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and care\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits both the Polaris 380 and the Polaris 360 and attaches the same way as the original bag. Empty it after each cycle when the debris is fine, since a bag packed with sand restricts flow and slows the cleaner. Rinse it out and let it dry between uses to extend its life.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624938287316,"sku":"POL-201-3320","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_101d8d19-b906-443b-8fac-8203c649c006.jpg?v=1788655788"},{"product_id":"hose-swivel-black","title":"Polaris Hose Swivel, Black","description":"\u003cp\u003eThe Polaris D21 is the black ball bearing hose swivel used on the BlackMax versions of the 280, 380, 480 and 3900 pressure cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs the cleaner drives around the pool the feed hose is constantly being twisted. The swivels along the hose let each section rotate independently so that twist is released instead of building into a coil. When a swivel seizes, the hose kinks, the cleaner drags it around in a knot and coverage suffers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChecking and replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwist the hose on either side of each swivel. A good one spins freely; a worn one binds or grinds. The D21 threads onto the hose sections, so replacing it is a matter of unscrewing the old swivel and fitting the new one. It is molded in black plastic to match the BlackMax hose.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624957292756,"sku":"POL-201-3401","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3ba7e855-59a1-40d6-b69a-e7aa207ed9e8.png?v=1788656084"},{"product_id":"polaris-zippered-bag-3-scrubbers-for-360-380-pool-cleaner-r0570600","title":"Polaris Zippered Bag + 3 Scrubbers for 360\/380 Pool Cleaners","description":"\u003cp\u003eThe Polaris R0570600 kit bundles the two parts that wear fastest on a Polaris 360 or 380 pressure side cleaner: a zippered filter bag and a set of three scrubbers. It is the genuine Polaris kit, so the bag hangs and seals the way the original did and the scrubbers fit without trimming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe bag\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zipper closure opens wide for emptying and zips shut so debris stays in the bag on the way to the deck. Once the mesh tears or the closure stops holding, the cleaner starts putting dirt back into the pool, which is the usual sign it is time for a new one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe scrubbers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree scrubbers come in the kit, enough to replace the worn set in one go and restore the scrubbing action along with the pickup.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624959488212,"sku":"POL-201-2188","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c4ab631a-66f4-43cd-9021-5e319bf7acd0.jpg?v=1788656536"},{"product_id":"universal-wall-fitting-quick-disconnect-white-380-280-180-3900","title":"Polaris Universal Wall Fitting Quick Disconnect, White (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris D29 is the universal wall fitting quick disconnect for Polaris pressure side pool cleaners. It is the main body of the wall fitting: the white plastic piece that twist locks into the dedicated return line in the pool wall and that the cleaner hose clips onto.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits the popular Polaris models\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same D29 fitting serves the Polaris 180, 280, 380, 3900 Sport and 480 Pro. If the cleaner hose no longer snaps on firmly, or the fitting has cracked or turned brittle from sun and chlorine, this is the replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the OEM Polaris D29, sometimes written D-29. Other parts of the wall assembly, such as the connector assembly and pressure relief valve, are sold separately.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624960241876,"sku":"POL-201-7561","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3cef9e01-0aa5-4cf9-baa6-de60282bfe00.jpg?v=1788656649"},{"product_id":"sweep-hose-attachment-clamp-380-360-280-180","title":"Polaris Genuine OEM Sweep Hose Attachment Clamp (380\/360\/280\/180)","description":"\u003cp\u003eThe Polaris B15 is the genuine sweep hose attachment clamp for the Polaris 180, 280, 280 Tank Trax, 360 and 380 pressure side pool cleaners. It holds the sweep hose to the cleaner body so the tail stays attached while the cleaner works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA small part that gets used hard\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sweep hose whips constantly during a cycle, and all of that motion works on this clamp. Sun and chlorine make the plastic brittle over time. When the tail hose starts coming loose or the clamp shows a crack, replacing it takes a minute and avoids losing the hose in the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOEM Polaris part B15, plastic, sold individually. Related sweep hose parts, including the adjustment screw and the complete sweep hose tail, are available separately.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624965714132,"sku":"POL-201-3228","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_396a9572-947b-4ad4-af78-23d23e28bb77.png?v=1788656792"},{"product_id":"back-up-valve-case-kit-white-380-280-180","title":"Polaris Genuine OEM Back-up Valve Case Kit, White (380\/280\/180)","description":"\u003cp\u003eThe Polaris G54 is the white outer case for the back-up valve on Polaris 180, 280 and 380 pressure cleaners. It is the shell only. The internal assembly that makes the valve cycle stays with your existing G52 back-up valve and moves into this case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to buy the case\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBack-up valve cases crack from years of sun and chlorinated water, or from a hard landing on the deck. If the valve still cycles but the housing is split or leaking around the seam, a new case brings it back without paying for a complete valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need more than the case\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the back-up valve has stopped cycling, or cycles constantly, the fault is in the internal mechanism. A cracked case will not cause that, so check the internals first and order the complete back-up valve or the internal assembly if they are the problem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGenuine Polaris, made for the 180, 280 and 380. It is molded plastic in white to match the original.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624967647444,"sku":"POL-201-1445","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e15cc13b-a5e0-4918-b7d8-d085c74b1b2a.jpg?v=1788656851"},{"product_id":"pool-cleaner-feed-hose-kit","title":"Polaris Genuine OEM G5 Pool Cleaner Feed Hose Kit","description":"\u003cp\u003eThe Polaris G5 is the genuine feed hose kit for the Polaris 180, 280, 280 Tank Trax, 380 and 3900 Sport pressure cleaners. It is the full 30 ft run: two 10 ft feed hose sections, a 10 ft leader hose, the universal wall fitting and all of the swivels and nuts that join them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace the hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA feed hose ages in two ways. The hose itself goes stiff and holds a curve, which drags the cleaner off course, and the swivels start to leak or bind so the hose no longer untwists as the cleaner turns. Once either shows up, replacing individual pieces is a losing game, and a complete kit puts the whole run back to new.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is not in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris ships the G5 without the G52 back-up valve and without the 6-504-00 filter screen. Move yours over if they are in good shape, or add them to the order.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624992813268,"sku":"POL-201-4091","price":266.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b55d9551-f3b3-442c-9a67-f802613be81e.jpg?v=1788661509"},{"product_id":"base-assembly-380-360","title":"Polaris Genuine OEM Base Assembly (380\/360)","description":"\u003cp\u003eThe Polaris 9-100-7026 is the genuine new style base assembly for the Polaris 380 and 360 pressure side cleaners. It is the lower half of the cleaner body, the piece the wheels, float and sweep hose all hang from, and it replaces a base that has cracked from hitting steps or worn through at the mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne piece top only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris changed the 380 and 360 body from a two piece clam shell top to a single piece top, and the base changed with it. This base fits the new style one piece top. Look at your cleaner before ordering: if the top is a single molded shell, this base is the right part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf you still have the clam shell top\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe older two piece top will not mate with this base. In that case replace the top and base together with the Polaris 9-100-7030 top and base kit. That kit is the new style body and retrofits every earlier 380 and 360, so the upgrade is a one time job.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624996810964,"sku":"POL-201-2171","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2ddcdc98-c794-441e-a7d3-c02618e95ff7.jpg?v=1788661623"},{"product_id":"filter-screen-uwf-qd","title":"Polaris Filter Screen for Universal Wall Fitting, UWF\/QD 6-504-00","description":"\u003cp\u003eThe Polaris 6-504-00 is the metal filter screen for the Polaris Universal Wall Fitting (UWF, part 9-100-9001) and the QD fitting. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe screen sits in the wall fitting and catches debris in the pressure line before it can reach the feed hose, the in line filter and the cleaner. A clogged screen is one of the most common reasons a Polaris pressure cleaner slows down, and a torn one lets grit through to parts that are far more expensive to replace.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the UWF used across the Polaris pressure cleaner line, including the 160, 165, 180, 280, 360, 380 and 3900. Pull the fitting, check the screen, and replace it if it is packed with debris that will not rinse out or has any holes in the mesh.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625022206164,"sku":"POL-201-7346","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_06add87e-e979-4fcb-8dd7-b078bbbb9773.jpg?v=1788662516"},{"product_id":"feed-hose-10-foot-380-280-180-3900","title":"Polaris 10 Foot Feed Hose (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris D45 is a genuine ten foot section of feed hose for the Polaris 180, 280, 380 and 3900 Sport pressure side pool cleaners. It is the hose that carries return line pressure from the wall fitting out to the cleaner, so a split or stiff section costs you cleaning power at the sweep head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne straight ten foot length of rubber feed hose, the same part Polaris ships on new cleaners. It joins to the rest of the hose run with the standard Polaris swivels, which are sold separately if yours are worn too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris lists the D45 for the 180, 280, 380 and 3900 Sport, and it also appears on the parts diagram for the 480 Pro, BlackMax and TankTrax. If your hose sections are cracked, kinked or leaking at the joints, replacing the bad section with a D45 is the fix.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625022664916,"sku":"POL-201-3273","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fba7bff6-8620-4199-898c-c5b1cb2f3bcd.png?v=1788662524"},{"product_id":"water-management-system-380","title":"Polaris Genuine OEM Water Management System (380)","description":"\u003cp\u003eThe Polaris 9-100-7010 is the water management system for the Polaris 380 pressure side pool cleaner. It is a new genuine Polaris part in molded plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe water management system sits inside the base of the cleaner and routes the pressurized water coming from the booster pump through the body. It installs into the base, so the cleaner has to be opened up to reach it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part is listed for the Polaris 380. Other Polaris cleaners use their own parts, so confirm the model before ordering.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625712005332,"sku":"POL-201-9886","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_43c6f2ef-f133-4b37-8ca8-6b040746a063.jpg?v=1788689028"},{"product_id":"feed-hose-nut-380-280-180-3900","title":"Polaris Genuine OEM Feed Hose Nut (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris D15 is the feed hose nut for the 180, 280, 380 and 3900 pressure side pool cleaners. Polaris also calls it the hose mender nut. It is the genuine Zodiac made part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe feed hose is built from sections joined by menders and swivels. This nut is the collar that draws each joint together and holds it there while the booster pump pushes water down the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA hose that separates as soon as the booster starts. When a nut splits or its threads strip, nothing holds the joint, and the cleaner loses drive while water sprays at the break.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the nut on its own. Hose sections and hose swivels are separate parts, and a hose that has been apart a few times is usually worth going over completely.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625722360020,"sku":"POL-201-3264","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_04ad2b9e-54af-4f41-8893-1db46d772251.png?v=1788690012"},{"product_id":"ladder-guard-set-2","title":"Polaris Genuine OEM Ladder Guard Set (2)","description":"\u003cp\u003eThe Polaris G21 is a set of two ladder guard panels. They keep a Polaris cleaner from getting stuck on the pool ladder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe problem\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pressure side cleaner drives a pattern and does not see obstacles. Ladder rails give it something to climb into and wedge against, and once it is hung up there it stops cleaning until someone walks out and frees it. That is lost cleaning time on every cycle, and it puts wear on the hose and the drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the guards do\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe two panels fit to the ladder and close off the gap the cleaner gets caught in, so it deflects and keeps going. They fit most ladders with poles under 2 in. in diameter, and 1.5 in. poles are the preferred size, so measure before ordering. Polaris lists the set with the parts for the 360 and 380 cleaners.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625724489940,"sku":"POL-201-9971","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_24e3f943-a98a-47f6-9a8a-96fa771dffdf.png?v=1788690139"},{"product_id":"screen-in-line-filter-280-380-3900","title":"Polaris Genuine OEM Screen, In-Line Filter (280\/380\/3900)","description":"\u003cp\u003eThe Polaris 48-222 is the in-line filter screen for the 280, 380, 3900 Sport, 480 PRO and 280 TankTrax pressure side cleaners. It is the genuine Polaris part, made of metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe in-line filter sits in the feed hose and catches sand and grit before the water reaches the cleaner. The screen is the working part inside it. Kept clean, it protects the jets and bearings of the cleaner from the debris the booster pump would otherwise push through them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRinse the screen whenever the cleaner starts to slow down. Once the mesh is torn, or so packed that rinsing no longer brings the flow back, replace it. A blocked screen shows up as low pressure at the cleaner and a slow, wandering cleaning pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the screen alone. If the filter body itself is cracked, the complete in-line filter assembly is a separate Polaris part.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625727996116,"sku":"POL-201-4841","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_afa7044b-ed09-4539-8d09-5a7fe203fbd7.png?v=1788690203"},{"product_id":"feed-pipe-time-blank-assembly-380-white","title":"Polaris Genuine OEM Feed Pipe Time Blank Assembly (380) White","description":"\u003cp\u003eThe Polaris 9-100-7003 is the genuine feed pipe assembly for the 380 pressure side cleaner, in white. It is the piece on top of the cleaner that the feed hose connects to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe failure it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA short stem projects off the back of the feed pipe, and the ballast float slides onto it. That stem is the weak point. Once it snaps the float will not stay put, the cleaner loses its trim in the water and stops climbing properly. Replacing the feed pipe puts the stem back and returns the float to where it belongs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e380 or 360\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the hose before ordering. The 380 uses a 3\/4 inch smooth feed hose and takes this part. A cleaner with the larger 1.5 inch corrugated hose is a 360, and it needs feed pipe 9-100-1002 instead. The o-ring that seals the feed pipe into the 380 base is included here, so the assembly goes in complete.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625742577876,"sku":"POL-201-2172","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4d048e33-eded-4e43-9cf2-6cb51ef991f6.jpg?v=1788690501"},{"product_id":"bag-collar-380-280","title":"Polaris Genuine OEM Bag Collar (380\/280)","description":"\u003cp\u003eThe Polaris 9-100-1018 is the bag collar for the 280, 380, 3900 and TR28P pressure side cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe collar is the clip that threads through the hook and loop tab on the filter bag and then snaps onto the cleaner hose. It is what keeps the bag hanging in the right place while the cleaner drags it around the pool. It is a small part and easy to overlook until it splits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the debris bag has been coming off during a cycle, or you find it lying on the pool floor, look at the collar first. A cracked collar loses its grip on the hose, and the bag then works its way free. It is sized for the 3\/4 inch hose these cleaners run.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625743200468,"sku":"POL-201-1350","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3d574280-02f8-4732-acec-4172205d24d2.jpg?v=1788690569"},{"product_id":"drive-train-gear-kit-with-turbine-bearing","title":"Polaris Genuine OEM Drive Train Gear Kit with Turbine Bearing","description":"\u003cp\u003eThe Polaris 9-100-1132 is the genuine drive train gear kit for the Polaris 360 and 380 automatic pool cleaners. It includes the drive train gears and the turbine bearing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the drive train works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater pressure spins the turbine inside the cleaner. That rotation passes through the drive train gears to the wheels, and the wheels carry the cleaner across the floor and up the walls. The gears are the link between the turbine and any actual movement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom this fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cleaner that stalls, wanders or sits still while the turbine is clearly running has usually stripped its gears. Grit works its way into the housing over the seasons and the teeth wear down until they no longer bite.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe belts and wheel bearings on a 360 or 380 wear on much the same timeline as the gears. If the cleaner is several seasons old, look them over during the same teardown so you only take the cleaner apart once.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625746804948,"sku":"POL-201-2558","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_729b6638-d447-4cff-abe8-b51b7fc63440.png?v=1788691299"},{"product_id":"all-purpose-filter-bag-380-360-zipper-closure","title":"Polaris Genuine OEM All-Purpose Filter Bag (380\/360) Zipper Closure","description":"\u003cp\u003eThe Polaris 9-100-1021 is the all-purpose filter bag with a zipper closure for the Vac-Sweep 360 and Vac-Sweep 380 pool cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eZipper or velcro\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris makes the all-purpose bag in two closures. This is the zipper version; the velcro version is a separate part number. Both do the same job, so order the one that matches how you empty the cleaner today.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bag is the only thing between the debris the cleaner picks up and the pool. As the mesh wears thin or a seam splits, the cleaner starts putting fine dirt straight back out, and owners often blame the cleaner rather than the bag. A bag that is worn through, torn or no longer closing properly should be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the bag is off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLook at the collar that holds the bag onto the cleaner. It is a separate part and it takes a beating in the same place the bag does.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625747329236,"sku":"POL-201-3329","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_78d517cd-e5c4-423d-ba30-c7946e49077b.jpg?v=1788691372"},{"product_id":"top-cover-380-360","title":"Polaris Genuine OEM Top Cover for 380 and 360 Cleaners","description":"\u003cp\u003eThe Polaris 9-100-1240 is the genuine OEM top cover for the Polaris 380 and 360 pressure side pool cleaners. It is the same part as the Polaris R0670000 top housing in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne piece or two piece\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis matters more than the model number. If your cleaner has a single piece top cover, this is the direct replacement. If it has the two piece clam shell style top, this cover will not fit it, and you need the new style top and base kit instead, Polaris part 9-100-7030.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIf you are not sure\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuy the top and base kit. The new style top and base retrofits onto all of the old style Polaris 380 and 360 cleaners, so it is the option that works regardless of which top your cleaner came with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy covers get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe top cover takes sun, chemicals and the occasional hard knock against a wall or step. Over years it goes brittle and cracks, and once it does the internals underneath are exposed. Replacing it is straightforward and puts the shell back to sound condition.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625747853524,"sku":"POL-201-7055","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_24bc585e-9e2f-483c-b0c0-b80d0555bf74.jpg?v=1788691462"},{"product_id":"thrust-jet-kit-180-280-380-360","title":"Polaris Genuine OEM Thrust Jet Kit (180\/280\/380\/360)","description":"\u003cp\u003eThe Polaris C131 is the genuine OEM thrust jet kit for the Polaris 180, 280, 380 and 360 pool cleaners. One part number covers all four models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is supplied as a kit rather than as a single loose piece, so what arrives is the complete thrust jet set for the cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe thrust jet is a wear item and a normal part of a cleaner overhaul. If the cleaner is already apart for other work, fitting a fresh jet kit at the same time saves opening it up again later. Confirm the part with UPC 738919000278 before ordering.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625749721300,"sku":"POL-201-9567","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a7f5613c-768c-48fe-bb46-86b61a67e76f.png?v=1788691732"},{"product_id":"feed-hose-nut-black","title":"Polaris Genuine OEM Feed Hose Nut, Black","description":"\u003cp\u003eThe Polaris D16 is the black feed hose nut for the BlackMax model 380 and 280 pressure side cleaners. It is the genuine Polaris part, molded in plastic like the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe feed hose is assembled from sections, and each joint is held by a nut. That nut carries the pressure the cleaner runs on. When it cracks or the thread strips, the joint weeps, pressure drops and the cleaner loses the drive it needs to climb walls and hold its pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the nut only. Hose sections, swivels and the back-up valve are separate Polaris parts, so check whether the hose itself has split before you order just the nut.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625750048980,"sku":"POL-201-3400","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0f13f378-0411-4013-a090-0e44ffdb87b7.png?v=1788691782"},{"product_id":"in-line-filter-assembly","title":"Polaris Genuine OEM In-Line Filter Assembly","description":"\u003cp\u003eThe Polaris 48-080 is the genuine in-line filter assembly for Polaris pressure side cleaners, used on the 180, 280, 380, 480 Pro and 3900 Sport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the clear housing matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe in-line filter sits in the feed hose and catches grit before it reaches the cleaner. On this newer style the housing is clear, so a glance tells you whether the screen is loaded. That is the difference between cleaning it when it needs it and cleaning it when you happen to remember.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIt is also a swivel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly acts as a hose swivel as well as a filter. On an older style hose you can pull the first swivel and put this in its place, which adds the filter without adding another joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe screen\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside is a large stainless steel screen. It rinses out and goes back in, and the screen itself is available separately if it is ever damaged.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625761485012,"sku":"POL-201-4801","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2a1b02c5-014c-46d3-9860-03d83b49b473.jpg?v=1788691986"},{"product_id":"leader-hose-10-foot-380-280-180-3900","title":"Polaris Genuine OEM Leader Hose, 10 Foot, (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris D50 is the genuine 10 foot leader hose for the Polaris 380, 280, 180 and 3900 pressure side cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes it the leader\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe leader is the section of the hose that attaches closest to the cleaner. Its rubber is more pliable than the sections that run back toward the wall, which is deliberate. That flexibility lets the cleaner turn and climb without the hose resisting it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it wears first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause it is the section doing all the flexing, the leader takes the most abuse. When a cleaner starts getting hung up, tracking oddly or stalling in a corner, a leader that has gone stiff, kinked or split is one of the first things worth inspecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne 10 foot rubber section, listed by Polaris for the 380, 280, 180 and 3900.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625784160468,"sku":"POL-201-3274","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7aadc362-2312-4c4d-80bc-d43d8d124a75.png?v=1788692180"},{"product_id":"collar-for-back-up-valve","title":"Polaris Genuine OEM Collar for Back-up Valve","description":"\u003cp\u003eThe Polaris G57 is the collar for the back-up valve on the Vac-Sweep 180, 280 and 380 pressure side cleaners, and on the 280 TankTrax. It is the genuine Polaris part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the back-up valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery pressure side Polaris relies on it. On a timed cycle the valve diverts water from the cleaner to the back-up jet, which pushes the unit backwards and out of whatever corner, step or ladder it has walked itself into. Without that reversal a cleaner can spend an entire cycle pinned in one place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe collar in particular\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe collar clamps the valve together on the feed hose. It is a small part, and when it cracks the valve loses its seal, weakens, or comes apart altogether. The symptom the owner sees is a cleaner that no longer backs itself out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the collar has failed, inspect the valve body and the O-ring set at the same time. Polaris sells both separately, and a valve that has been leaking has usually taken its seals along with it.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625785307348,"sku":"POL-201-1776","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_db0b2352-f954-4643-93fc-8d3e37d7f105.jpg?v=1788692346"},{"product_id":"pressure-relief-all-black-for-blackmax-model","title":"Polaris Genuine OEM Pressure Relief, All Black for BlackMax Model","description":"\u003cp\u003ePolaris 9-100-9006 is the all black pressure relief assembly supplied for the BlackMax model, and it is cataloged for the Polaris 380 and 280 pressure side cleaners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine and black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris builds this relief in two finishes, and this is the black one, which is what the BlackMax cleaners carry. Ordering by part number 9-100-9006 gets the black assembly rather than the standard finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt arrives as the complete assembly in molded plastic, so there is nothing to build up before it goes on the cleaner. Check your cleaner model against the fitment before ordering, since Polaris uses related but distinct parts across its pressure side range.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625798349012,"sku":"POL-201-1774","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ee59c8ef-5028-46b0-b996-8caf01b462e5.jpg?v=1788700304"},{"product_id":"universal-wall-fitting-collar-uwf","title":"Polaris Genuine OEM Universal Wall Fitting Collar (UWF)","description":"\u003cp\u003eThe Polaris 6-500-00 is the universal wall fitting collar, the white plastic ring that anchors the UWF into the pool wall. It is the genuine Zodiac made Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne side of the collar carries 1-1\/2 in. threads that go into the pool wall. The other side has the two nubs that the bayonet fitting on the cleaner hose locks onto. Everything the hose attaches to depends on those two nubs being intact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the bayonet will not lock, spins free, or the nubs have snapped off, the collar is the part to change rather than the whole wall fitting. It serves the Polaris 180, 280, 280 Tank Trax, 360, 380, 3900 Sport and 480 Pro, so one small part covers most of the pressure side range.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625813487828,"sku":"POL-201-7348","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_be06913b-4a15-423e-8f61-7b904767740f.png?v=1788700453"},{"product_id":"tail-sweep-pro-scrubber","title":"Polaris Genuine OEM Tail Sweep Pro Scrubber","description":"\u003cp\u003eThe Polaris TSP10P Tail Sweep Pro is the factory tail tip for Polaris pressure side cleaners. It replaces the plain tail orifice tip on the sweep hose and changes how the tail behaves in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA worn or bare sweep hose tail throws a jet of water over the coping, which is how deck furniture, windows and anyone standing at the edge end up soaked while the cleaner runs. The Tail Sweep Pro reshapes that flow so the water stays in the pool, and it does it without slowing the tail down. Polaris rates the sweep hose at up to 50 percent greater motion with the part installed, so the tail keeps working the walls and steps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and what is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt snaps onto the sweep hose tail orifice tip, so no tools and no cutting. The tail scrubber is included and installation instructions come in the package. Polaris lists it for the 280, 380, 360 and 3900 cleaners.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625815847124,"sku":"POL-201-1800","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e65e4313-862c-4bd4-85fa-81c632faaf17.jpg?v=1788700484"},{"product_id":"back-up-valve-case-kit-black-380-280-180","title":"Polaris Genuine OEM Back-up Valve Case Replacement Kit, Black","description":"\u003cp\u003eThe Polaris G64 is the black back-up valve case kit for the 180, 280 and 380 pool cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShell only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is the outer case of the back-up valve. The internals that actually redirect water are not included, so it is the right part when the housing itself has failed and the mechanism inside is still good. If water is escaping past the mechanism, the complete back-up valve kit is the item to order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck which valve you have\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is listed for the 180, 280 and 380 cleaners, and it is also described as the case kit for the G62 back-up valve on 380 and 280 models. Compare your existing valve against the part before ordering so the halves line up.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625840423124,"sku":"POL-201-3406","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_acea482b-e922-425f-a6ac-6a66cd56cb89.png?v=1788701290"},{"product_id":"leaf-bag-380-360","title":"Polaris Genuine OEM Leaf Bag (380\/360)","description":"\u003cp\u003eThe Polaris 9-100-1012 is the leaf bag for the 380 and 360 pressure side cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich bag to choose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris makes more than one bag for these cleaners. The leaf bag is the coarse one, meant for leaves and bulky debris. The all purpose bags, sold with either a velcro or a zipper closure, catch finer material. Pools under trees generally do better on the leaf bag through fall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is worth replacing on schedule\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhatever the bag holds is material that never reaches the pump basket or the filter. A bag with a split seam or a stretched mouth quietly returns its catch to the pool while the cleaner keeps running its pattern, so a bag that has started to leak is worth changing before the filter takes the load.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625840849108,"sku":"POL-201-7560","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f66e59a8-d007-4dd4-ba06-4c95d70a0864.jpg?v=1788701305"},{"product_id":"single-side-wheel-380-360","title":"Polaris Genuine OEM Single-side Wheel (380\/360)","description":"\u003cp\u003eThe Polaris 9-100-1116 is the genuine single-side wheel for the Polaris 380 and Polaris 360 pool cleaners. The same wheel is also listed under the OEM number 87-100-1636.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSingle-side or double-side\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 380 and 360 carry both types. This listing is the single-side wheel. The double-side wheel is a separate part, so it is worth looking at which wheel on the cleaner has cracked, worn flat or seized before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a worn wheel does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWheels are what put the cleaner drive onto the pool surface and steer the pattern it walks. When one is worn or cracked, the cleaner starts to track badly, wander off its route or hang up in the same corner, and areas of the pool stop getting covered even though the unit is clearly running.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625847730388,"sku":"POL-201-6510","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5a215bd8-c960-4828-98ca-7dd69997f01e.png?v=1788701514"},{"product_id":"o-ring-feed-pipe-assembly-380-360","title":"Polaris Genuine OEM O-Ring, Feed Pipe Assembly (380\/360)","description":"\u003cp\u003eThe Polaris 9-100-5132 is the O-ring for the feed pipe assembly on the Polaris 380 and 360 pressure side pool cleaners. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe job it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePressure side cleaners run on water pressure delivered through the feed pipe. This O-ring seals that path. When it hardens, flattens or splits, pressure escapes before it reaches the jets and turbine, and the cleaner responds by slowing down, climbing badly or losing the sweep tail action entirely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny time the feed pipe assembly comes apart, put a new O-ring in rather than reusing the old one. It costs very little compared with chasing a pressure loss twice.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625849336020,"sku":"POL-201-3305","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_329dff87-49c2-41bf-beea-dfa04f096a9f.png?v=1788701603"},{"product_id":"e-clip-stainless-steel-380-360-340","title":"Polaris Genuine OEM E-clip, Stainless Steel (380\/360\/340)","description":"\u003cp\u003eThe Polaris 9-100-5107 is a stainless steel e-clip for the Polaris 380, 360 and 340 ATV pool cleaners. It is the genuine Polaris part and is sold as a single clip. Polaris also lists it under the 480 Pro cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn e-clip is a small sprung ring that snaps sideways into a machined groove on a shaft. It does one job: it stops everything on that shaft from sliding off the end. On these cleaners that usually means a wheel, a roller or a pivot pin stays where it belongs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA plated clip in chlorinated water rusts, loses its spring and eventually lets go. This one is stainless steel, so it holds its grip through seasons in the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne clip per order. If a repair calls for several, or you want spares for the ones that inevitably ping off into the grass, order the quantity you need.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626101518548,"sku":"POL-201-7344","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_760747b6-288e-4b91-829f-7fac18639694.jpg?v=1788704735"},{"product_id":"mechanism-for-g52-polaris-back-up-valve-380-280-180-3900","title":"Polaris Genuine OEM Mechanism for G52 Back-up Valve (380\/280\/180\/3900)","description":"\u003cp\u003eThe Polaris G53 is the internal mechanism for the G52 back-up valve, the valve that gives the Polaris 180, 280, 380 and 3900 pressure cleaners their reverse cycle. It is the genuine Polaris part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the reverse cycle matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pressure side cleaner has no way to see where it is. What keeps it from parking in a corner or hanging on a step is the back-up valve, which every few minutes diverts water and drives the cleaner backwards for a short burst. When the mechanism inside the valve wears out, the cleaner either stops reversing or reverses so often it never covers the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRebuild rather than replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mechanism is the part that wears; the valve housing usually outlives it. If the body and hose fittings are sound, fitting a new G53 brings the valve back for a fraction of the cost of a complete assembly.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626105352404,"sku":"POL-201-3370","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c342d5de-f2eb-40c2-88b5-4b354b381f87.png?v=1788704854"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/polaris-380-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}