{"title":"Automation \u0026 Controls","description":"\u003cp\u003ePool automation systems, control boards, chemical controllers, timers and panels.\u003c\/p\u003e","products":[{"product_id":"pentair-522474-intellichem-container-tank-mount-pump-upgrade-kit","title":"Pentair IntelliChem Container Tank-Mount Pump Upgrade Kit","description":"\u003cp\u003eThe Pentair 522474 is the tank mounted pump upgrade kit for the IntelliChem pH and ORP chemical controller. It is the genuine Pentair kit.\u003c\/p\u003e\u003cp\u003eThe kit puts the feed pump on the chemical container so IntelliChem can dose from the tank as it reads pH and ORP. It is the upgrade route for an existing IntelliChem installation moving to the tank mount pump arrangement.\u003c\/p\u003e\u003cp\u003eTubing, ORP sensors and flow switch kits for IntelliChem are separate parts. Check the condition of your tubing before the pump goes in.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624553099476,"sku":"PAC-451-2474","price":267.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PAC-451-2474_1a.png?v=1788643407"},{"product_id":"hayward-glx-pcb-pro-main-pcb-replacement-for-hayward-goldline-prologic-automation-and-chlorination-after-10-2008","title":"Hayward Main PCB Replacement for Goldline ProLogic Automation and Chlorination After 10\/2008","description":"\u003cp\u003eThe Hayward GLX-PCB-PRO is the main circuit board for the Goldline ProLogic and AquaPlus automation and chlorination controls, for all versions manufactured after October 2008.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ProLogic runs pool automation and the salt chlorinator from a single control, and this is the primary board behind both. When the board fails, the control is dead or misbehaving even though the enclosure, wiring and cell are fine, and replacing the PCB is the repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the date\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis board is for units built after 10\/2008. Confirm the manufacture date on your control before ordering. It is a genuine Hayward part.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624832708820,"sku":"GLD-301-1005","price":1058.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/Glx-Pcb-Pro_hayward.jpg?v=1788643289"},{"product_id":"uoc-4aux-rplcmnt-eztch","title":"Pentair Genuine OEM Replacement UOC Motherboard, 4 Aux, EasyTouch","description":"\u003cp\u003eThe Pentair 520659 is the genuine UOC motherboard with four auxiliary circuits for EasyTouch pool and spa automation systems. It is the main board in the load center, the part that drives the relays, reads the sensors and runs every schedule and control function.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is the fix\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA board that has taken a lightning surge or stopped responding takes the whole system down with it. Replacing the motherboard restores the panel without replacing the load center, relays or transformer, all of which carry over.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 4 aux board. Confirm your EasyTouch panel is the four auxiliary version; eight aux systems use a different motherboard.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624873734356,"sku":"COM-301-2870","price":605.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3f652171-0b89-4a41-abe2-3c2fce0da122.jpg?v=1788647963"},{"product_id":"aquapod-2-0-wireless-waterproof-touchscreen-remote","title":"Hayward AquaPod 2.0 Wireless Waterproof Touchscreen Remote","description":"\u003cp\u003eThe Hayward AquaPod 2.0 is a handheld touchscreen remote for Hayward pool and spa automation. Its over-molded sealed housing makes it properly waterproof, not just splash resistant, and it runs on a rechargeable battery, so it can live poolside and come into the water with you.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePaired with a ProLogic, OnCommand or AquaPlus control, the AquaPod 2.0 gives you the whole system in your hand, from chemistry automation through to Universal ColorLogic light shows. It is fully programmable, so the functions you use most are where you want them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt works with ProLogic at rev. 2.6 or higher, AquaPlus at rev. 2.6 or higher, and the OnCommand controller. As with every Hayward wireless accessory, the main control unit needs a wireless antenna, the AQL2 wireless base station, for the remote to communicate. If your installation does not have one yet, order it together with the remote.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624873865428,"sku":"GLD-30-0094","price":558.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_07c4e279-b69d-4b9e-9ed7-1fd39cc8b92d.jpg?v=1788647979"},{"product_id":"pentair-intellicenter-load-center-system-with-i5ps-personality-kit-without-scg-521907","title":"Pentair IntelliCenter Load Center System with i5PS Personality Kit, without SCG","description":"\u003cp\u003ePentair part 521907 is the IntelliCenter automation system built around a load center with the i5PS pool and spa personality kit. This version comes without a salt chlorine generator (SCG) and includes two IntelliValves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are buying\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe load center houses the IntelliCenter control hardware, and the i5PS personality kit sets it up for a pool and spa installation. The two IntelliValves handle the pool and spa valve switching. Because there is no SCG in this package, it suits pools that are chlorinated another way, or that already have a chlorinator on the pad.\u003c\/p\u003e\u003cp\u003eThe UPC is 788379883461. It ships by parcel.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624874094804,"sku":"COM-30-0972","price":2480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a0d19056-a91f-4c22-8e2a-40c3ba2aeb8d.png?v=1788648001"},{"product_id":"local-display-for-omnilogic","title":"Hayward Local Display for OmniLogic","description":"\u003cp\u003eThe Hayward HLX-LOC-DSP is the replacement local display for the OmniLogic pool and spa automation system, the on-site interface at the OmniLogic controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe local display unit only. It does not include the OmniLogic control panel, its circuit boards or any wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the part number on your existing display against HLX-LOC-DSP and compare the front and back photos with your unit to be sure the housing and connections match.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624877240532,"sku":"HAY-301-1994","price":777.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HLX-LOC-DSP_front.jpg?v=1788648511"},{"product_id":"jar-kt-flow-cell-ak1200","title":"Pentair Clear Flow Cell Jelly Jar for AK1200 IntelliChem Chemical Controller","description":"\u003cp\u003eThe Pentair 754000340 is the genuine clear flow cell jelly jar for the Acu-Trol AK1200 chemical controller, and it is listed for the IntelliChem as well. The flow cell is where the controller samples pool water, and the clear jar lets you see that water moving through it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJars cloud, craze and eventually crack with years of sun and chemistry. A fresh jar restores a clear view of the flow cell and removes a common leak point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the jar only. The flow jar o-ring, flow switch magnet kit and controller tubing are separate service items, so check their condition while the flow cell is apart.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624879763668,"sku":"ATR-451-4139","price":312.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_09816ef4-e6ff-47de-a76d-1b2d513d0177.jpg?v=1788648772"},{"product_id":"intelliconnect-control-monitoring-system-ec-523317","title":"Pentair IntelliConnect Control \u0026 Monitoring System with Wi-Fi","description":"\u003cp\u003eIntelliConnect is Pentair's control and monitoring system for simple pools. It connects to your home Wi-Fi and hands control of the pool's functions to an app on your phone, so scheduling, running and adjusting the equipment no longer means a trip to the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControl from the app\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery schedule, operation and adjustment is made from your smartphone, whether you are in the backyard or on the other side of the world. The app also sends notifications when it has a maintenance or performance improvement recommendation, and it carries maintenance tips written for both first time and long time pool owners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the right fit for a pool owner with a straightforward setup who wants remote control and monitoring without stepping up to a full automation panel. Pentair part number EC-523317.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624880189652,"sku":"COM-30-0445","price":558.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6774da56-cbc1-4f05-b238-6501dffed3aa.jpg?v=1788648842"},{"product_id":"s-r-smith-poollux-plus2-60w-6-amp-single-zone-led-light-control-pt-6001","title":"S.R. Smith 60W 6 Amp Single Zone LED Light Control Power Tower","description":"\u003cp\u003eThe S.R. Smith poolLUX Plus2 PT-6001 is a single zone, 60W, 6 amp power tower that runs S.R. Smith LED pool lights and controls them from a wireless remote. It is built as a direct replacement for the Fiberstars 6004 and 2004 fiber optic illuminators, so a pool that still runs aging fiber lighting can move to LED without reworking the equipment pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWiring that goes quickly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Plus2 uses screwless terminals in place of wire nuts, which S.R. Smith rates at about half the connection time of the original PT-6000. It offers both 12VAC and 13VAC outputs, an auto resetting thermal fuse for overload protection and replaceable current fusing for water safety.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for the pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe enclosure is corrosion resistant polycarbonate rated NEMA 3R, and the unit is ETL Listed to UL 379 and certified to CSA C22.2 #218.1. The included wireless remote gives one touch color sync across S.R. Smith LED lighting products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the single zone, one circuit unit. If you need two independently controlled zones, the PT-6002 is the dual zone version. An optional base for the power tower is available separately.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48624881565908,"sku":"FST-30-7278","price":826.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e8fb8c64-b47b-4cbe-a97a-21937149ef45.jpg?v=1788649417"},{"product_id":"pentair-521218-load-center-intellichlor-scg-surge-board-pcba","title":"Pentair Genuine OEM Load Center IntelliChlor SCG Surge Board PCBA","description":"\u003cp\u003eThe Pentair 521218 is the SCG surge board PCBA for the IntelliChlor i5+3 new style load center in EasyTouch PL4 and PSL4 control systems. It is the board that runs the IntelliChlor salt chlorine generator from the load center, with a surge board that shields that circuit from electrical spikes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew style, not old\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair released this board as the upgrade from the earlier load center version, with improved performance and durability. Confirm your load center is the i5+3 new style before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does not include\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the board only. The load center transformer and any personality card are separate parts. It is a genuine Pentair part.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624883138772,"sku":"COM-30-1218","price":321.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/COM-30-1218.png?v=1788649475"},{"product_id":"pentair-intellicenter-load-center-system-with-i8ps-personality-kit-521904","title":"Pentair IntelliCenter Load Center System with i8PS Personality Kit","description":"\u003cp\u003eThe Pentair IntelliCenter Load Center System, part 521904, pairs the IntelliCenter load center with the i8PS personality kit. It is the version supplied without the IntelliChlor SCG transformer, so it suits pools that are not running an IntelliChlor cell or that already have the transformer in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePool control from anywhere\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntelliCenter is Pentair's highest capacity control system and the one built with service in mind. It communicates across a wide range of devices and platforms, so the pool can be programmed and monitored from the pad, the house or across town. Many of the tasks that used to require a service visit, such as programming changes, checks and monitoring, can be done without anyone on site.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBundled or built out\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair sells IntelliCenter as popular bundled systems that arrive in one box, and also a la carte so the configuration can be built to the pool. This listing is the i8PS bundle without the SCG transformer.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624884023508,"sku":"COM-30-0969","price":2870.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f2d6581b-93ae-4871-b3c6-7db7376d2150.png?v=1788649560"},{"product_id":"ips-controllers-orp-sensor-sxorp","title":"IPS Controllers ORP Sensor with Platinum Tip","description":"\u003cp\u003eThe IPS Controllers SXORP is a yellow top ORP sensor with a platinum tip. It measures oxidation reduction potential in a non-salt pool or spa and feeds that reading to the IPS controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eYellow top or green top\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIPS colors the caps to keep the two sensors apart. The yellow top SXORP is for pools that are not salt chlorinated. Salt pools use the green top SXORPG with a gold tip. The SXORPGEX is the exchange version offered with a new controller purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pH sensor for the same controllers is the SXPH.\u003c\/p\u003e","brand":"IPS Controllers","offers":[{"title":"Default Title","offer_id":48624884941012,"sku":"ISI-451-1000","price":194.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f4a10739-aeba-411b-b3ce-6202ef0e9d87.jpg?v=1788649695"},{"product_id":"levelsmart-water-level-sensor","title":"H2Flow Controls LevelSmart Replacement Water Level Sensor","description":"\u003cp\u003eThe H2Flow Controls LSRS is the replacement water level sensor for the LevelSmart wireless autofill system. It is the part that lives in the pool; the valve controller at the equipment pad is separate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sensor is positioned in the pool at the water level you want to hold. Every 30 minutes it wakes up, measures the current level and sends that reading wirelessly to the LevelSmart valve controller. If the water is low, the controller opens the fill valve for 7 minutes, then the sensor goes back to checking every 30 minutes until the level is right.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf your LevelSmart controller has stopped receiving readings or the pool is no longer topping up on its own, the sensor is the usual suspect. This is the same LSRS sensor the system shipped with, so it pairs with the existing controller.\u003c\/p\u003e","brand":"H2Flow Controls","offers":[{"title":"Default Title","offer_id":48624885203156,"sku":"EMO-56-0019","price":110.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dcc4ce02-f0f2-4bb9-aa11-f4ce0bd286e1.png?v=1788649740"},{"product_id":"pentair-521604-control-panel-board-assembly-for-suntouch-and-solartouch-control-system","title":"Pentair Genuine OEM Control Panel Board Assembly for SunTouch and SolarTouch Control System","description":"\u003cp\u003eThe Pentair 521604 is the genuine control panel board assembly for the SunTouch and SolarTouch control systems. It is the OEM Pentair part, supplied as the complete board assembly for the control panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists this one board for both SunTouch and SolarTouch. Confirm your system is one of the two before ordering; it is the panel board, not the complete panel or the power center.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKill power to the system at the breaker before opening the enclosure. Note or photograph where each connector plugs in on the old board, move them across one at a time, and restore power only once the enclosure is closed back up.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624885301460,"sku":"COM-301-0217","price":253.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/COM-301-0217_1a.png?v=1788649763"},{"product_id":"pentair-intellicenter-load-center-system-with-i5p-personality-kit-without-scg-523448","title":"Pentair IntelliCenter Load Center System with i5P Personality Kit","description":"\u003cp\u003eThe Pentair 523448 is the IntelliCenter automation system in its load center form with the i5P personality kit, supplied without a salt chlorine generator. It is Pentair's highest capacity and most service friendly control platform.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControl from anywhere\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntelliCenter talks to phones, tablets and computers across a wide range of platforms, so the pool, spa, lighting and equipment can be run and checked from wherever you are. The same connection lets a service company handle programming, diagnostics and monitoring remotely, which means many problems are solved without a visit to the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe load center houses the power distribution and relays, and the i5P personality kit defines what the system controls. This part number leaves out the salt chlorine generator. Pentair sells IntelliCenter as bundled systems that arrive in one box or as separate components to build up a la carte, and 523448 is one of the bundled configurations.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624886513876,"sku":"COM-30-0444","price":2106.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1624e19a-30f2-413f-9b66-79c665402068.png?v=1788649958"},{"product_id":"valve-actuator-jva-24v","title":"Jandy Valve Actuator JVA 24V","description":"\u003cp\u003eThe Jandy 4424 is the 24V valve actuator for Jandy Pro Series NeverLube and gray 2 and 3 port diverter valves. Mounted on the valve, it turns the diverter under command from an AquaLink RS system, switching between pool and spa or driving water features without anyone touching a handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat changed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the newer design, with easier cam adjustment, a PCB and a hidden toggle switch. It rotates 180 degrees and can be set to stop the diverter at any position, not only at the ends of travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLabels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnits have shipped labeled JVA2440 and, after Jandy made internal improvements, JVA2444. Both are part number 4424 and the same product.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624918036692,"sku":"JDY-30-6324","price":221.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_727a9994-6470-4a2e-8a7d-8194d6311719.jpg?v=1788653303"},{"product_id":"digital-control-interface-assembly","title":"Hayward Digital Control Interface Assembly","description":"\u003cp\u003eThe Hayward SPX3200LCD is the digital control interface display assembly for the TriStar VS SP3200VSP series pumps. The same assembly serves the MaxFlo Variable Speed and TriStar Variable Speed pumps, and it also fits the Super Pump Variable Speed Expert Line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the display and control module on the pump: the screen you read speeds and schedules from and the buttons you program them with. When the screen goes blank or unreadable, or the buttons stop registering while the motor still runs, the interface assembly is the part at fault.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm SPX3200LCD against the part number on your existing interface. It is sold as the complete assembly.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624919806164,"sku":"HAY-101-8783","price":444.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/hayward-spx3200lcd-digital-control-interface-assembly.jpg?v=1788653437"},{"product_id":"pentair-522048-intellitouch-easytouch-to-next-gen-upgrade-kit-i10ps-for-clc-cpc","title":"Pentair IntelliTouch\/EasyTouch to IntelliCenter Next Gen Upgrade Kit, i10PS for CLC\/CPC","description":"\u003cp\u003eThe Pentair 522048 is an upgrade kit that converts an existing IntelliTouch or EasyTouch pool control system into IntelliCenter, the most advanced automation platform Pentair offers. It brings the full IntelliCenter feature set to an older installation without a full replacement. This is the i10PS configuration for CLC\/CPC systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you gain\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuilt in WiFi connectivity for remote control, support for multiple heaters, centralized lighting control for nighttime scenes, and a cool plunge setting for hot weather where the equipment can chill the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm that your existing system is an IntelliTouch or EasyTouch and that the i10PS for CLC\/CPC configuration matches it. Pentair offers this kit in more than one configuration, so check the code against your system or with your installer.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624920199380,"sku":"COM-30-2470","price":1249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ac13177b-cfc7-481f-a653-794e8e64acba.png?v=1788653495"},{"product_id":"gecko-alliance-0607-005012-aeware-in-k450-7-button-control-panel-with-overlay","title":"Gecko Aeware IN.K450 7-Button Control Panel with Overlay","description":"\u003cp\u003eThe Gecko Alliance 0607-005012 is the Aeware IN.K450 seven button control panel, supplied with its overlay. It is the spa side control that the bather uses to run pumps, lights and temperature, and this is the complete replacement for one that has cracked, faded or stopped responding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOrder by matching the IN.K450 model and the 0607-005012 part number to the panel already on the spa. Because the overlay is included, the job is a straight swap of the old panel for the new one.\u003c\/p\u003e","brand":"Gecko Alliance","offers":[{"title":"Default Title","offer_id":48624921968852,"sku":"GEA-85-4503","price":167.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_046164c8-fd96-4149-a7a2-1b690cfc96c2.png?v=1788653588"},{"product_id":"thermalflo-control-board-assembly","title":"Pentair Control Board Assembly for ThermalFlo and UltraTemp Heat Pump","description":"\u003cp\u003eThe Pentair 472734 is the genuine replacement control board assembly for ThermalFlo and UltraTemp heat pumps. It comes as the complete assembly, board, bezel and label together, so it drops into the control housing without reusing the old trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the board does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe control board is the heart of the heat pump. It reads the water and coil thermistors and the pressure switches, drives the display and keypad and decides when the compressor and fan should run. When it fails the symptoms are usually a blank or frozen display, or a unit that will not respond to its sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch 472734 to the parts list for your heat pump model. Because boards are not returnable once installed, rule out the cheaper culprits first: confirm supply voltage at the unit, and test the high pressure switch and thermistors, which fail more often than the board.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624922624212,"sku":"PUR-151-2734","price":373.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_14815136-15a6-4d95-bb17-0b0dd2f9c9ab.jpg?v=1788653655"},{"product_id":"hayward-hlxproupg-pro-logic-retrofit-kit-omnipl","title":"Hayward Pro Logic Retrofit Kit, OmniPL","description":"\u003cp\u003eThe Hayward HLXPROUPG converts an existing Pro Logic or AquaLogic installation into an OmniPL automation system. It is an upgrade kit rather than a complete controller, so the panel and wiring already on the wall stay put and the pool picks up variable speed pump, salt system and lighting control at a mid range price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit ships with 4 relays and can be upgraded to 6 or 8 later. Variable speed pumps do not take a relay at all; the system runs up to 8 of them directly. With ColorLogic LED lights, OmniDirect Mode adds color options, dimming and speed control that are not available otherwise. PLUS models include a salt cell and S models are salt ready.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow you run it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn external touchscreen on a 15 ft cord mounts wherever it is easiest to reach. W models add full mobile control through the OmniLogic app plus Amazon Alexa and Google Home voice control. OmniLogic remotes work with it, including the HLWRELESS, HLWALLMOUNT and HLSPASIDE.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLegacy Pro Logic and AquaLogic remotes, whether wireless, wall mount, desktop or spaside, are not compatible with the retrofit and will need to be replaced with OmniLogic equivalents.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624926621908,"sku":"HAY-30-2121","price":1544.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HAY-30-2121-_1a.png?v=1788654667"},{"product_id":"screenlogic-interface-and-wireless-connection-bundle-kit","title":"Pentair ScreenLogic Interface and Wireless Connection Bundle Kit","description":"\u003cp\u003eThe Pentair ScreenLogic bundle, part EC-522104, is the interface and wireless link that puts an IntelliTouch or EasyTouch automation system on the devices you already carry. The box holds the ScreenLogic interface and the wireless connection kit, so one order covers both halves of the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControl from anywhere\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOnce the interface is on your home network, the ScreenLogic apps for iPhone, iPad, iPod touch and Android take over the pool: temperatures, jets, lighting and water features. The same functions are available on a Windows PC or Mac through the desktop app, which ships with the kit and can also be downloaded from Pentair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWireless to the pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe connection kit runs on 2.4 GHz and is rated for up to a half mile line of sight. That is the difference between a weekend install and a trench across the yard when the equipment pad sits far from the house.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChemistry and color\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePair it with a Pentair IntelliChem controller and the app lets you change, track and review pH and ORP history. Systems with IntelliBrite LED lights or MagicStream laminars get full color lighting control from the same screen.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624928063700,"sku":"COM-30-2104","price":462.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/522104.jpg?v=1788654820"},{"product_id":"kit-surge-board-pc100","title":"Pentair Surge Board Kit, PC100","description":"\u003cp\u003eThe Pentair 521034Z is the replacement surge board kit for the PC100 power center used with select IntelliChlor salt chlorine generators. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the board does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe surge board sits between the incoming power and the chlorinator electronics and absorbs power surges and other electrical disturbances before they reach the control side. When it fails, the power center can stop driving the cell, and this board is the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe surge board, a surge suppressor and the wiring connectors needed to install it, so the swap does not depend on reusing old connectors.\u003c\/p\u003e\u003cp\u003eConfirm that your system uses the PC100 power center before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624928227540,"sku":"COM-301-2918","price":239.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/COM-301-2918_1a.png?v=1788654841"},{"product_id":"hayward-glx-pl-loc-p-4-local-display-for-prologicr-p-4-system","title":"Hayward Local Display Replacement for PL-P-4 Goldline Pro Logic Automation and Chlorination","description":"\u003cp\u003eThe Hayward GLX-PL-LOC-P-4 is the replacement local display for the Goldline Pro Logic PL-P-4 automation and chlorination system. It is the genuine Hayward part.\u003c\/p\u003e\u003cp\u003eThe local display is the readout at the Pro Logic enclosure itself. When it goes dark, fades or stops responding, this part restores control at the equipment pad without replacing the rest of the system.\u003c\/p\u003e\u003cp\u003eConfirm that your system is the PL-P-4 before ordering.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624930226388,"sku":"GLD-301-1006","price":505.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7da040ba-f944-4f75-bd93-9465e64c7f1b.jpg?v=1788655046"},{"product_id":"power-supply-assembly","title":"Hayward OmniLogic Power Supply Assembly","description":"\u003cp\u003eThe Hayward HLX-PSUPPLY is the replacement power supply assembly for the OmniLogic pool automation system. It is the genuine Hayward part, supplied as a complete assembly.\u003c\/p\u003e\u003cp\u003eThe power supply feeds the OmniLogic electronics. When the controller is dead despite power at the breaker, this assembly is the usual repair, and it restores the system without replacing the rest of the enclosure.\u003c\/p\u003e\u003cp\u003eWork inside the OmniLogic enclosure involves line voltage. Have a qualified technician confirm the fault and perform the swap.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624930455764,"sku":"HAY-301-1993","price":573.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6bbfeec2-2727-4556-8732-1d25aab5dd5d.jpg?v=1788655071"},{"product_id":"mechanical-time-switch-mechanism-only-220v-dpst","title":"Intermatic 24-Hour 208-277V Mechanical Time Switch, DPST, Mechanism Only","description":"\u003cp\u003eThe Intermatic T104M is the replacement clock mechanism for the T104 series 24-hour mechanical time switch. It runs on 208-277V, switches two poles and is rated for 40 A per pole, which covers a filter pump, a heat pump or a lighting circuit on a 240V pad. When the old clock stops turning or the contacts burn, this swaps in without replacing the enclosure or the wiring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScheduling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrippers on the 24-hour dial set up to 12 on and off operations a day. A manual override lever runs or stops the load on demand and hands control back to the trippers on the next cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the mechanism only, with no box. It is DPST for 208-277V circuits. If your pump runs on 120V, the SPST T101 mechanism is the correct part.\u003c\/p\u003e","brand":"Intermatic","offers":[{"title":"Default Title","offer_id":48624934551764,"sku":"INT-30-669","price":92.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_153e0c03-852c-484d-9e16-ce7cd306f1cb.jpg?v=1788655185"},{"product_id":"4-function-spa-side-remote-switch-gray-150ft","title":"Jandy 4 Function Spa Side Remote Switch, Gray, 150 ft.","description":"\u003cp\u003eThe Jandy 8050 is a four function spa side remote for AquaLink RS automation. From the spa you can switch four circuits, typically the spa, jets, heater and a light, without walking to the equipment pad or reaching for a handheld controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for the spa edge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe remote is weather resistant and designed to be installed above the water level in the tile line, in the deck or anywhere outdoors near the spa. The face is 2-3\/4 in. in diameter, and this version is gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCable and system limits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 150 ft cable covers long runs between the spa and the equipment pad. It works with any AquaLink RS model, and up to three spa side remotes can be connected to a single RS system.\u003c\/p\u003e","brand":"Waterpik Technologies","offers":[{"title":"Default Title","offer_id":48624937402580,"sku":"JDY-30-8050","price":495.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e9cd70a6-dd4d-4cd9-b757-d1fdf893c7a7.jpg?v=1788655655"},{"product_id":"hayward-colorlogic-lkcus1100-light-controller-standalone","title":"Hayward ColorLogic Light Controller, Standalone","description":"\u003cp\u003eThe Hayward LKCUS1100 is the standalone wall controller for low voltage ColorLogic LED lights. It installs in an existing light switch box, so you choose the color for the pool, spa and landscape lighting from inside the house rather than at the equipment pad or through an automation panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePick the color before you commit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA dial selects the color or light show, and a preview window shows every ColorLogic color and show so you can see the choice before it goes out to the pool. Indicator LEDs light up to confirm what is currently selected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo buttons that save trips outside\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe resync button brings multiple lights back into step if they drift apart. The schedule button lets you enter recurring light settings, so the lights come on the way you want each evening without an automation system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis controller is for low voltage ColorLogic LED lights and is the standalone version, meaning it runs on its own rather than as part of a Hayward automation system.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624938549460,"sku":"HAY-30-6173","price":356.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_49f77ff6-4339-4cc2-b088-7baf8cbdcdd7.png?v=1788655824"},{"product_id":"pentair-522472-acid-tank-with-tank-mounted-pump","title":"Pentair Acid Tank with Tank Mounted Pump","description":"\u003cp\u003ePentair 522472 is the acid tank with tank mounted pump for the IntelliChem chemical controller. The tank holds the acid supply and the pump fitted to it delivers the doses IntelliChem calls for, so the two arrive as a single assembly ready to connect to the controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart of the system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntelliChem reads pH and ORP through its sensors and decides when to feed; this tank and pump carry out the acid side of that instruction. It is used alongside the IntelliChem pH sensor, ORP sensor and in-line strainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the genuine Pentair part, 522472. Confirm your controller is an IntelliChem before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624956309716,"sku":"PAC-45-0552","price":547.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PAC-45-0553_1a.png?v=1788655962"},{"product_id":"easytouch-8-pool-spa-combo-no-salt-chlorine-generator-2-actuators","title":"Pentair EasyTouch 8 Pool\/Spa Combo with 2 Actuators","description":"\u003cp\u003eThe Pentair EasyTouch 8 EC-520540 is a complete automation load center for a pool and spa that share equipment. It controls up to 8 accessory functions and includes 4 valve outputs with 2 actuators, an 8 position breaker panel, a local control panel at the load center and 2 temperature sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne button control, full programmability\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery function is a single button on the self contained load center. Everyday operation can be programmed for efficient running and reprogrammed when usage changes or equipment is added. A range of optional wired and wireless remotes and an indoor control panel are available if you want control away from the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiagnostics built in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSelf test diagnostics verify that each function is operating correctly, and a diagnostic screen reports failures so a technician can go straight to the fault.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the version without a salt chlorine generator. The IntelliChlor cell, its transformer and the indoor control panel are all purchased separately.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624956866772,"sku":"COM-30-1540","price":2084.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/EC-520540.png?v=1788656038"},{"product_id":"dual-orp-ph-controller","title":"IPS Controllers Automated Dual ORP and pH Controller for Muriatic Acid or CO2, IPS-M820L","description":"\u003cp\u003eThe IPS Controllers IPS-M820L is an automated chemistry controller that manages pH and sanitizer on a single pool. It reads pH and ORP continuously and doses to hold the set points, taking the daily balancing act off the operator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDual ORP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhat sets the M820 apart is its second ORP channel. Two sanitizer output devices can be installed on the same pool and run from one controller. A common arrangement is a salt chlorine generator as the primary sanitizer with liquid chlorine on the second channel, so the system can respond quickly when bather load climbs. On an all liquid system the second channel can instead drive a backup pump and tank as a safety reserve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003epH control and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pH side doses either muriatic acid or CO2, whichever the site uses. The controller works with every common sanitizing method, including liquid, tablets, granular and salt chlorine generators, and operates on 110 or 230 VAC.\u003c\/p\u003e","brand":"IPS Controllers","offers":[{"title":"Default Title","offer_id":48624957522132,"sku":"ISI-45-1002","price":1703.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/ips-m820l-dual-orp-ph-controller.jpg?v=1788656125"},{"product_id":"pcb-main-printed-circuit-board-for-aquarite","title":"Hayward PCB Main Printed Circuit Board for AquaRite","description":"\u003cp\u003eThe Hayward GLX-PCB-RITE is the main printed circuit board for the AquaRite salt chlorination system. It is the board that runs the AQR power center, and fitting it brings the unit current to revision 1.55.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the update gives you\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith revision 1.55 installed, the power center can run the T-CELL-3 and T-CELL-9 salt cells on pools under 40,000 gallons. That widens the cell choices for an older AquaRite without replacing the whole control box.\u003c\/p\u003e\u003cp\u003eThe board measures 6-1\/2 in. long by 5-3\/8 in. wide and works on either 110V or 220V supply. It is the main board only; the digital display board and the flow switch are separate parts, so diagnose which one has failed before ordering.\u003c\/p\u003e","brand":"Goldline Controls","offers":[{"title":"Default Title","offer_id":48624970170580,"sku":"GLD-451-1004","price":416.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_063ddf6f-4a08-4cea-88c1-2731ff79520d.jpg?v=1788656957"},{"product_id":"easytouch-8sc-pool-spa-combo-ic40-cell-2-actuators","title":"Pentair EasyTouch 8SC Pool\/Spa Combo with IC40 Salt Cell, Transformer, and 2 Actuators","description":"\u003cp\u003eThe Pentair EasyTouch 8SC, part EC-520545, is a complete automation package for a pool and spa that share one set of equipment. The load center brings the pump, heater, lights and valves under one control, and the included IC40 salt cell handles chlorination for pools up to 40,000 gallons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the package\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 8SC load center with 8 feature relays, 3 valve outputs and an 8 position breaker panel, two valve actuators, two temperature sensors, the IC40 chlorine generator cell and the local control at the load center. An indoor control is not included and is bought separately, as are any wired or wireless remotes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEveryday operation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery function is controlled with one-button access from the self-contained load center. Equipment schedules are fully programmable, and they can be reprogrammed as pool and spa use changes through the year or when equipment is added or swapped.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOnboard diagnostics run a self test on specific functions, and a diagnostic screen reports failures so a technician can go straight to the problem instead of hunting for it.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624971317460,"sku":"COM-30-1545","price":3211.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/EC-520545.jpg?v=1788657004"},{"product_id":"pentair-522186-ph-sensor-for-intellichem-chemical-controller","title":"Pentair pH Sensor for IntelliChem Chemical Controller","description":"\u003cp\u003eThis is the genuine Pentair pH sensor for the IntelliChem chemical controller, part number 522186Z. IntelliChem adjusts pH based on what this probe reports, so a tired or damaged sensor means bad readings and bad adjustments. Swapping in a fresh probe puts the readings back where they belong.\u003c\/p\u003e\u003cp\u003eIt is the pH sensor only. The IntelliChem ORP sensor is a separate part, so if both are due, order both.\u003c\/p\u003e\u003cp\u003eMatch the part number to your controller before ordering: Pentair 522186Z, UPC 788379865573. The same sensor is also listed under 522186.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624987209940,"sku":"PAC-451-2186","price":142.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_01653858-2fc5-4857-953f-b9bfeb1a076c.jpg?v=1788661431"},{"product_id":"circuit-board-f-lx80-10688","title":"Pentair Circuit Board for ComPool LX80 Commercial Control Power Centers and RF","description":"\u003cp\u003eThe Pentair PCLX80 is the replacement circuit board for ComPool LX80 commercial control power centers and RF receivers. It carries the ComPool number 10688 and is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoard level repair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSwapping the board keeps the existing LX80 enclosure, transformer and field wiring in place, which is a much smaller job than replacing the control center. Before ordering, confirm the unit has incoming power and that the transformer is producing output; a failed transformer presents the same way as a failed board, and the transformer assembly is a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eListed for the ComPool LX80 power center and RF receiver. Check the model label on your unit before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624993468628,"sku":"COM-301-2690","price":561.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/circuit-board-for-compool-lx80-commercial-control-power-centers-and-rf--PentairPCLX80.jpg?v=1788661526"},{"product_id":"dual-orp-ph-controller-1","title":"IPS Controllers Automated Dual ORP and pH Controller for Muriatic Acid or CO2","description":"\u003cp\u003eThe IPS M820 automates pool chemistry. It monitors pH and ORP, then dispenses the right amount of chemical on demand so sanitizer and pH stay consistent through the day rather than drifting between manual doses. It handles pools, spas and water features of any size, from a residence to a hotel, condominium, aquatic center or school.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDual ORP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhat sets the M820 apart is a second ORP controlled output. That lets an operator run two sanitizer devices on the same pool: a primary such as a salt chlorine generator, plus a secondary such as liquid chlorine that responds quickly when bather load climbs. On a liquid chlorine system the second output can instead drive a backup pump and tank for redundancy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorks with what you already use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe M820 is compatible with every common sanitizing method, liquid, tablets, granular and salt chlorine generators, and it controls pH with either muriatic acid or CO2. Installation is out of the box and setup takes minutes.\u003c\/p\u003e\u003cp\u003eChemical automation has improved water quality enough that many states, along with the CDC Model Aquatic Health Code, now require controllers on commercial pools and spas. The M820 is a direct path to meeting that.\u003c\/p\u003e","brand":"IPS","offers":[{"title":"Default Title","offer_id":48624996253908,"sku":"ISI-45-1001","price":1373.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ddca5f1f-bf57-4ef1-add3-1a20be262896.png?v=1788661571"},{"product_id":"hayward-glx-probe-ph-sense-and-dispense-ph-probe","title":"Hayward Sense and Dispense pH Probe","description":"\u003cp\u003eThe Hayward GLX-PROBE-PH is the replacement pH probe for the Sense and Dispense chemistry automation system. It is the genuine Hayward part.\u003c\/p\u003e\u003cp\u003eSense and Dispense reads the water with two probes, one for pH and one for ORP. This listing is the pH probe only; the ORP probe is sold separately. Sense and Dispense parts are listed under both the Goldline and Hayward names, and GLX-PROBE-PH is the current Hayward number.\u003c\/p\u003e\u003cp\u003eFit it as a direct replacement when the existing pH probe has worn out or failed.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624996548820,"sku":"GLD-451-1024","price":393.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_88ac4eed-51b4-4c3a-9f7c-dd8d72a38b93.jpg?v=1788661601"},{"product_id":"aqualink-rs8-upgrade-kit-pool-spa-combo-rev-qq","title":"Jandy AquaLink RS8 Upgrade Kit, Pool\/Spa Combo, Rev.QQ","description":"\u003cp\u003eThe Jandy R0468501 is the genuine upgrade kit for the AquaLink RS8 control system in the Pool\/Spa Combo configuration, revision QQ. It is for pools that already have an AquaLink RS8 installed and brings that system up to the current revision.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe AquaLink RS8 runs a pool and spa that share equipment, with eight auxiliary circuits. Upgrading to Rev.QQ extends the features available for controlling the pool, spa and connected equipment from the AquaLink.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an upgrade, not a complete control system. Confirm that your existing system is an AquaLink RS8 in the Pool\/Spa Combo configuration. Pool only and spa only systems use different kits.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624997236948,"sku":"JDY-301-0002","price":1043.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e6030bdf-6a79-4608-9f49-2e8897d4f39f.jpg?v=1788661660"},{"product_id":"hayward-omnix-wifi-gateway-w3gatewayx1","title":"Hayward OmniX Wifi Gateway","description":"\u003cp\u003eThe Hayward OmniX Wifi Gateway, part number W3GATEWAYX1, is the optional piece that takes OmniX enabled pool equipment from local control to remote control. Installed inside the home, it connects the equipment to your home network so the OmniX app can reach it from anywhere.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOmniX equipment runs on its own without the gateway. Adding the gateway is what enables away from home control and monitoring: checking status, making changes and keeping an eye on the system when you are not standing at the pad. A powerful sub-GHz link between the gateway and the equipment keeps that connection robust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHomeowners who want to manage the pool from a phone, and service professionals who want to see what a system is doing before a visit. Confirm your equipment is OmniX enabled before ordering, since the gateway only connects to OmniX equipment.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624997761236,"sku":"HAY-101-1001","price":215.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2bfaf4a0-66db-409a-82b1-c44a8ab1020a.png?v=1788661681"},{"product_id":"hayward-glx-pcb-hpc-4-main-pcb-service-part-replacement-for-hayward-hpc-4-e-command-4-automation-and-sanitization","title":"Hayward Main PCB Service Part Replacement for HPC-4 E-Command 4 Automation and Sanitization","description":"\u003cp\u003eThe Hayward GLX-PCB-HPC-4 is the main printed circuit board for the HPC-4 E-Command 4 automation and sanitization control, supplied by Hayward as a service part. It is the genuine OEM board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRepair, not replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen the main board in an HPC-4 fails, this part lets you replace the board and keep the enclosure, field wiring and sensors that are already installed, instead of pulling the whole control off the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the control is an HPC-4 E-Command 4 and match the part number GLX-PCB-HPC-4 and UPC 761418011346 on the box. Shut off power at the breaker before opening the enclosure.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48625005625556,"sku":"GLD-301-1017","price":824.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/GLX-PCB-HPC-4_XL.jpg?v=1788661908"},{"product_id":"hayward-glxs3omnipcb-omni-printed-circuit-board-for-aquarite-s3-salt-chlorination-system","title":"Hayward Omni Printed Circuit Board for AquaRite S3 Salt Chlorination System","description":"\u003cp\u003eThe Hayward GLXS3OMNIPCB is the Omni printed circuit board for the AquaRite S3 salt chlorination system. It is the genuine Hayward part, built from top grade components and materials for the longest service life the system can give.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA direct replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe board is made to install straight into the existing AquaRite S3, so a failed board is fixed by swapping the PCB rather than replacing the whole unit or the cell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis board is specific to the AquaRite S3. Confirm the model and match the part number GLXS3OMNIPCB and UPC 610377436793 on the box. Cut power at the breaker before opening the enclosure.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48625005822164,"sku":"GLD-451-0003","price":367.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0a35be91-b07d-49e6-b774-7073b955f1dc.jpg?v=1788661941"},{"product_id":"intellichem-orp-sensor-without-wire","title":"Pentair IntelliChem ORP Sensor, without Wire","description":"\u003cp\u003eThe Pentair 522187Z is the replacement ORP sensor for the IntelliChem chemical controller, supplied without the sensor wire. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntelliChem reads two probes, one for pH and one for ORP, and uses those readings to decide when to feed chemicals. The ORP sensor measures oxidation reduction potential, which is how the controller judges sanitizer activity. When the probe ages and its readings drift, the controller doses on bad information. Replacing the sensor restores the reading the whole system depends on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the sensor only. The wire is not included, so it suits an installed IntelliChem where the existing cable is undamaged. If you need the pH probe instead, that is a separate Pentair part.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625006575828,"sku":"PAC-451-2187","price":200.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5a3857ef-65df-430b-8f09-fe041c3350f5.jpg?v=1788662056"},{"product_id":"waterproof-wireless-remoteomnilogic","title":"Hayward OmniLogic Waterproof Wireless Remote","description":"\u003cp\u003eThe Hayward HLWIRELESS is the waterproof wireless remote for the OmniLogic pool automation system. It puts the controls in your hand around the pool instead of at the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy waterproof matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pool remote spends its life near water. This one is built for that, so it can be used from the deck or the pool without worrying about splashes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made for Hayward OmniLogic. It is a separate item from the OmniPL retrofit kit, which converts an older Pro Logic system; this listing is the remote only.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48625006641364,"sku":"HAY-30-2109","price":603.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3c1d5ba2-45a2-4eb6-989b-c86dab28645d.jpg?v=1788662065"},{"product_id":"60a-3-circuit-control-center-w-digital-time-clock","title":"Intermatic 60 Amp Load Center with P1353ME Mechanism","description":"\u003cp\u003eThe Intermatic PE25300 combines a 60 amp load center with a P1353ME digital timer mechanism, giving a pool pad breaker protection and three timed circuits in one enclosure. The mechanism uses three SPST outputs to schedule a single speed or two speed filter pump, a cleaner or booster pump, and pool, spa or landscape lighting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the enclosure\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere are four breaker spaces, and the dead front has two knockouts for switches or GFCI receptacles. Wiring devices are installed with standoffs, sold separately. The panel also accepts Intermatic T100 series mechanisms, so it can be configured with mechanical timers where that is preferred.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart of the PE20000 series\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe PE25300 belongs to the Intermatic PE20000 pool and spa control family. A version with a freeze protection probe is available under a separate part number.\u003c\/p\u003e","brand":"Intermatic","offers":[{"title":"Default Title","offer_id":48625019879636,"sku":"INT-30-647","price":510.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ad4c6ad7-c3bf-42f3-82d0-8b65675364f4.jpg?v=1788662226"},{"product_id":"suntouch-single-body-control-system-includes-temp-sensors-3-relays","title":"Pentair SunTouch Single Body Control System, Includes Temp Sensors and 3 Relays","description":"\u003cp\u003eThe Pentair SunTouch 520859 is a single body control system for a pool and spa that share one filtration system. It replaces the mechanical time clock with a power center that runs the pump, heater and up to four feature circuits on schedules, with manual override when you want the spa on now.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach circuit can hold 4 operating schedules, up to 6 per system, so filtration, cleaner, lights and solar can each run on their own timing. It works with gas or electric heaters, heat pumps and solar, and holds temperature in 1 degree steps. It also supports one IntelliFlo pump and the IntelliChlor salt chlorine generator, so pump speed and chlorine output live in the same control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy bother\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eScheduling lets you run the pump during off peak electrical rates and stop paying for hours you do not need. Heating the spa on demand instead of leaving it up to temperature is the other saving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne power center, one 20 ft water temperature sensor, one 40 in. air temperature sensor and three relays.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625020305620,"sku":"COM-30-0859","price":735.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_60c08e86-39b5-4c55-9415-bffc6102d52f.jpg?v=1788662270"},{"product_id":"pentair-intellichem-orp-sensor-cable-744000360","title":"Pentair IntelliChem ORP Sensor Cable","description":"\u003cp\u003eThe Pentair 744000360 is the genuine 3 ft cable that connects the ORP sensor to the IntelliChem chemical controller. It is the ORP side only; the pH sensor uses its own cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eErratic or dropping ORP readings are not always the probe. A cable that has been nicked, kinked or corroded at the connector produces the same symptoms, and it is the cheaper part to try first when the sensor calibrates correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sensor is not included. If the probe is also due, order it alongside the cable, together with the IntelliChem service kit if the unit is getting a full service.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625020436692,"sku":"PAC-451-0593","price":56.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_633089cc-dd11-4bd0-9c31-57f54d874808.jpg?v=1788662312"},{"product_id":"pentair-521397-chlorine-container-for-intellichem-chemical-controller-4-gal","title":"Pentair Chlorine Container for IntelliChem Chemical Controller, 4 Gal","description":"\u003cp\u003eThe Pentair 521397 is the 4 gallon chlorine container for the IntelliChem chemical controller. It is the genuine Pentair part and holds the chlorine supply the controller feeds from.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChlorine, not acid\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntelliChem manages both sanitizer and pH, and each chemical gets its own container. This is the chlorine side. The acid side uses a separate Pentair 4 gallon acid container, so order the one that matches the chemical you are storing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the container on its own, for replacing a damaged one or adding to an existing IntelliChem installation.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625020895444,"sku":"PAC-451-1397","price":468.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PAC-451-1397_1a.png?v=1788662367"},{"product_id":"sense-and-dispense-ph-dispense-120v-solenoid-valve-for-co2","title":"Hayward Sense and Dispense pH Dispense, 120V Solenoid Valve for CO2","description":"\u003cp\u003eThe Hayward AQL-CHEM2 is the pH Dispense kit for Sense and Dispense, a 120 V solenoid valve that releases CO2 into the pool water to bring pH down. It is the dispensing half of Hayward's automated pH control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSense and Dispense reads pH through its sensing kit, and when the reading climbs above the set point the automation energizes this solenoid. CO2 goes in, pH comes down, the valve closes. The homeowner never handles acid and the pad never stores it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 120 V version. Hayward makes the same solenoid in 240 V, so match the voltage to your equipment. You also need the Sense and Dispense ORP and pH sensing kit for the automation to have a pH reading to act on. If you prefer to feed acid rather than CO2, Hayward's 120 V acid feeder kit is the alternative.\u003c\/p\u003e","brand":"Goldline Controls","offers":[{"title":"Default Title","offer_id":48625020960980,"sku":"GLD-451-1019","price":438.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7b671bd4-1490-4b0d-94a2-7132013d3e8b.jpg?v=1788662375"},{"product_id":"flow-switch-for-flow-cell","title":"Rola-Chem Flow Switch for Globe Flow Cell","description":"\u003cp\u003eThe Rola-Chem 550183 is the replacement flow switch for Rola-Chem's globe style flow cell. It is the genuine Rola-Chem part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe flow switch proves that water is moving through the flow cell. The controller will only feed chemical while that signal is present, which keeps it from dosing a dead line when the pump is off. A switch that sticks open shuts feeding down; one that fails closed lets the controller feed with no flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the switch on its own, not the flow cell. Confirm your cell is the globe style before ordering.\u003c\/p\u003e","brand":"Rola-Chem","offers":[{"title":"Default Title","offer_id":48625020993748,"sku":"ROL-451-6073","price":146.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_34469bf2-c841-4f6b-988c-5a82bb4f4b7b.jpg?v=1788662380"},{"product_id":"is4-spa-side-remote-white-100ft","title":"Pentair Genuine OEM iS4 Spa-Side Remote, White, 100 ft.","description":"\u003cp\u003eThe Pentair iS4 is a four-function spa-side remote from the Compool line, here in white with a 100 ft. cable. It puts four functions of the pool and spa system within reach of the water: auxiliary circuits, the heater, heat boost and more.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFour buttons, your choice of functions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny four functions of the system can be assigned to the iS4, so the buttons do what matters at the spa: jets, lights, blower, heater, whatever is wired to the aux circuits. Heater and heat boost can be controlled directly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e100 feet of cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 100 ft. cable covers spas set well away from the equipment pad. This is the genuine Pentair part, 521885, in white.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625023189204,"sku":"COM-30-1885","price":315.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0d3686bf-ca75-443d-9c74-b7cc3a68c8c6.jpg?v=1788662618"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/pool-automation.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}