{"title":"Filter Parts \u0026 Cartridges","description":"\u003cp\u003eReplacement filter cartridges, DE grids, multiport valves, o-rings, manifolds and tank parts.\u003c\/p\u003e","products":[{"product_id":"hayward-outlet-elbow-o-ring-pro-grid-dex2400z5","title":"Hayward Outlet Elbow O-Ring Pro-Grid | DEX2400Z5","description":"Hayward Outlet Elbow O-Ring Pro-Grid","brand":"Hayward","offers":[{"title":"Default Title","offer_id":47383112384724,"sku":"16089","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/16089_0_202011121055.jpg?v=1766356260"},{"product_id":"pentair-triton-valve-adaptor-o-ring-154494","title":"Pentair O-Ring Valve adapter | 154494","description":"\u003cdiv style=\"border: 2px solid #10b981; background-color: #f0fdf4; padding: 12px; margin-bottom: 16px; border-radius: 4px;\"\u003e\u003cstrong style=\"color: #065f46;\"\u003eThis item has been discontinued.\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv\u003ePentair O-Ring Valve adapter\u003c\/div\u003e\r\n\u003cul\u003e\r\n     \u003cli\u003eFor use with: FNS® Pool and Spa D.E. Filter, Tagelus® Filter Model TA 30D, TA 35D, TA 40D, TA 50D, TA 60D, 6 Inch Valve Adapter\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n","brand":"Pentair Aquatic Systems","offers":[{"title":"Default Title","offer_id":47403853414612,"sku":"28174","price":2.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/154494_l_1.jpg?v=1767136267"},{"product_id":"filbur-complete-de-filter-grid-set-48-sq-ft-24-in-grids","title":"DE Pool Filter Grid Replacement Set Complete","description":"\u003cp\u003eComplete replacement grid sets for diatomaceous earth pool filters, in five sizes from 24 to 72 square feet. Every set is eight grids: seven full size plus one partial that closes the assembly. Pick the size that matches your filter, using the table below to check it against the part number you are replacing.\u003c\/p\u003e\n\u003cp\u003eEach grid is built around a reinforced center tube. The tube acts as a duct, funneling water from the outer edges of the grid into the center and out through the frame. Spreading the draw this way keeps tension off the fabric, which is usually what decides how long a grid set lasts and how hard the pump has to work to pull through it.\u003c\/p\u003e\n\u003cp\u003eThe fabric is woven polypropylene made from virgin resins only, stitched with chemical resistant 4-ply thread. Virgin resin matters here: reground material carries impurities that weaken the weave and open up the pore structure, which is how a tired grid starts passing DE back into the pool.\u003c\/p\u003e\n\u003ch3\u003eSizes and part numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter area\u003c\/th\u003e\n\u003cth\u003eGrid height\u003c\/th\u003e\n\u003cth\u003eFilbur\u003c\/th\u003e\n\u003cth\u003eUnicel\u003c\/th\u003e\n\u003cth\u003eOur SKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e24 sq. ft.\u003c\/td\u003e\n\u003ctd\u003e12 in.\u003c\/td\u003e\n\u003ctd\u003eFC-9520\u003c\/td\u003e\n\u003ctd\u003eFS-2002\u003c\/td\u003e\n\u003ctd\u003eUNI-60-5180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e36 sq. ft.\u003c\/td\u003e\n\u003ctd\u003e18 in.\u003c\/td\u003e\n\u003ctd\u003eFC-9530\u003c\/td\u003e\n\u003ctd\u003eFS-2003\u003c\/td\u003e\n\u003ctd\u003eUNI-60-5181\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48 sq. ft.\u003c\/td\u003e\n\u003ctd\u003e24 in.\u003c\/td\u003e\n\u003ctd\u003eFC-9540\u003c\/td\u003e\n\u003ctd\u003eFS-2004\u003c\/td\u003e\n\u003ctd\u003eUNI-60-5182\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 sq. ft.\u003c\/td\u003e\n\u003ctd\u003e30 in.\u003c\/td\u003e\n\u003ctd\u003eFC-9550\u003c\/td\u003e\n\u003ctd\u003eFS-2005\u003c\/td\u003e\n\u003ctd\u003eUNI-60-5183\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e72 sq. ft.\u003c\/td\u003e\n\u003ctd\u003e36 in.\u003c\/td\u003e\n\u003ctd\u003eFC-9560\u003c\/td\u003e\n\u003ctd\u003eFS-2006\u003c\/td\u003e\n\u003ctd\u003eUNI-60-5184\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eChoosing the right size\u003c\/h3\u003e\n\u003cp\u003eMeasure the height of a grid already in the filter, or read the square footage off the filter label. The two go together: 12 in. grids make a 24 sq. ft. set, 18 in. a 36, 24 in. a 48, 30 in. a 60 and 36 in. a 72. The brand on the tank does not decide fit, the grid dimensions do.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the box\u003c\/h3\u003e\n\u003cp\u003eSeven full size grids and one partial grid, eight grids total, which is a complete set for one filter. Manifolds, standpipes and clamps are not included. Reuse the ones already in the filter or order them separately.\u003c\/p\u003e\n\u003ch3\u003eWhen to replace a grid set\u003c\/h3\u003e\n\u003cp\u003eReplace when DE comes back into the pool through the returns, when the filter will not hold pressure, or when the fabric shows tears, thin patches or a hardened glaze that backwashing no longer clears. Grids are replaced as a full set rather than one at a time, because a single new grid alongside seven worn ones takes an uneven share of the flow and fails early.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/de-grid-features-photo_cd1e11ac-0c96-4c16-b2eb-71853c11395f.png?v=1788228465\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Filbur","offers":[{"title":"24 sq. ft. (12 in. grids)","offer_id":48574838997204,"sku":"UNI-60-5180","price":100.99,"currency_code":"USD","in_stock":true},{"title":"36 sq. ft. (18 in. grids)","offer_id":48574839029972,"sku":"UNI-60-5181","price":143.99,"currency_code":"USD","in_stock":true},{"title":"48 sq. ft. (24 in. grids)","offer_id":48574839718100,"sku":"UNI-60-5182","price":175.99,"currency_code":"USD","in_stock":true},{"title":"60 sq. ft. (30 in. grids)","offer_id":48574839062740,"sku":"UNI-60-5183","price":193.99,"currency_code":"USD","in_stock":true},{"title":"72 sq. ft. (36 in. grids)","offer_id":48574839095508,"sku":"UNI-60-5184","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/Filbur_FC-9540.png?v=1787940947"},{"product_id":"complete-vari-flo-sp714t-xl-1-5-top-mount-valve-kit","title":"Hayward SP0714T Vari-Flo XL 1.5 in. Top Mount Multiport Valve Kit","description":"\u003cp\u003eThe Hayward SP0714T Vari-Flo XL is the top mount multiport valve on Hayward's Pro Series sand filters, sold here as the complete kit: the valve itself, the tank o-ring, a side mount pressure gauge and the two piece clamp that holds it to the tank. It is the genuine Hayward part and the current replacement for the older SP-711-13.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeven positions on one lever\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFilter for everyday running, Backwash to flush the sand bed, Rinse to resettle it, Waste to send water around the filter for lowering the pool or vacuuming heavy debris, Recirculate to move water without filtering, Closed, and Winter for laying the system up. A built in sight glass shows the backwash water running clear, so you know when to switch to rinse rather than guessing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for years on a pad\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe body and cover are ABS, the spring is heavy duty stainless steel and the valve seat is heavy duty rubber. The self cleaning design keeps the diverter from clogging or sticking between uses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePorts are 1.5 in. threaded on an 8 in. flange. That matches the S164T, S166T, S180T, S190T, S210T, S220T, S244T and S245T. Filters plumbed in 2 in., including the S310T and S310T2, take the SP071620T instead. Everything for the swap is in the box, so no separate o-ring or clamp order is needed.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/spins0.arqspin.com\/iframe.html?spin=1a4i530004t0k\u0026amp;is=0.16\" width=\"500\" height=\"500\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48618098098388,"sku":"HAY-06-271","price":158.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ee40a594-5655-4ec0-b57b-41e6a4b6cf6e.jpg?v=1788629097"},{"product_id":"pentair-170145-starite-s7m120-large-and-small-cartridge-250210200s-250220201s","title":"Sta-Rite 170145 System 3 S7M120 Large and Small Cartridge Set, 25021-0200S and 25022-0201S","description":"\u003cp\u003ePentair 170145 is the genuine replacement cartridge pack for the Sta-Rite System 3 S7M120, the 21 in. modular media filter. It contains both elements the filter uses: the 25021-0200S inner cartridge and the 25022-0201S outer cartridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo cartridges that work as one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe System 3 nests a smaller cartridge inside a larger one. The inner element measures 11 in. by 11 in. by 31.25 in. and the outer 19 in. by 19 in. by 23 in. Together they give the filter its full surface area, which is why replacing only one of them rarely brings performance back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCartridges are cleaned many times over their life, but eventually hosing no longer returns the pressure gauge to its clean reading, and pleats start to fray or collapse. That is the point to fit a new pack rather than keep cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis pack fits the S7M120 only. The S8M150, S7M400 and S8M500 in the same family take different cartridges. The model is on the tank label.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48620697419988,"sku":"STA-051-6578","price":464.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f157c2cb-828b-49b3-a55b-ba75c7ec9a62.png?v=1788573177"},{"product_id":"jandy-bwvl-mpv-80-2-side-mount-multi-port-valve-with-unions","title":"Jandy 2\" Side Mount Multi-Port Valve with Unions for DEV48\/60, JS60-SM or JS100-SM, BWVL-MPV-80","description":"\u003cp\u003eThe Jandy BWVL-MPV-80 is the 2 in. side mount multiport valve fitted to Jandy DEV48 and DEV60 DE filters and to the JS60-SM and JS100-SM side mount sand filters. It is supplied with its unions, so it couples straight to the filter tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix positions on one handle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEveryday filtering, backwash, rinse and the remaining service modes are all selected from the single handle, which is what makes a multiport the easiest way to run a DE or sand filter through a cleaning cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMolded ABS\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is molded ABS: rigid, corrosion free and suited to a valve that spends its life outdoors with water in it. Ports are 2 in. to match the plumbing on these filters. This is the genuine Jandy part.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624548348116,"sku":"TLD-06-134","price":327.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6ff46842-89b0-40d6-aee1-39b347b1f1d0.jpg?v=1788643242"},{"product_id":"tank-bottom-assembly","title":"Jandy Replacement Bottom Tank Assembly for CL \u0026 DEV Model Filters, R0466500","description":"\u003cp\u003eThe Jandy R0466500 is the lower tank half for CL series cartridge filters and DEV series DE filters, supplied as a complete assembly rather than a bare shell. The tank bottom comes with its bulkhead fitting, unions with o-rings, outlet elbow, tank o-ring and tank retaining ring, so a cracked or leaking lower tank can be swapped without chasing down the small parts separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything that lives below the clamp ring: the molded tank bottom, the bulkhead fitting, both unions with their o-rings, the outlet elbow, the large tank o-ring that seals the two halves, and the retaining ring. The existing tank top, internals and clamp carry over.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOlder DEL and CV tanks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis assembly can also replace the bottom on a DEL DE filter or a CV cartridge filter, but not as a straight swap. On a DEL the drain is on the side rather than the back, the plumbing unions must be replaced because the bulkhead fittings are different, and the multiport valve has to be replaced as well because the union threads do not match. On a CV with the inlet on one side and the outlet on the other, the plumbing has to be brought around so that both connect at the front of the tank, inlet at the bottom port and outlet at the top port. The unions in the box are there for that work.\u003c\/p\u003e\u003cp\u003eOn a current CL or DEV filter, none of that applies: set the new bottom in place, seat the o-ring, drop the internals back in and clamp the top on.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624549822676,"sku":"TLD-051-5048","price":673.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4b59065b-00d7-4f71-a711-cd3ca5021b4b.jpg?v=1788642919"},{"product_id":"2-valve-kit-multiport-side-mount-sand-filters-sm-20-3","title":"Pentair 2 in. Multiport Valve Kit for Side Mount Sand Filters, SM-20-3, 261055","description":"\u003cp\u003ePentair 261055, model SM-20-3, is the 2 in. threaded multiport backwash valve for side mount Pentair filters. It is the genuine Pentair valve listed for Triton II sand filters and Quad DE filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix positions plus winterizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve handle locks positively into each of its six operating positions, and a separate winterizing position lets the valve body drain when the system is laid up. The body is PVC, made for the working pressures of a side mount sand filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSide mount valves are matched to the filter by port spacing. This one measures 7-1\/2 in. centerline to centerline between the filter ports and has 2 in. threaded connections. Measure your existing valve before ordering; a different centerline will not line up.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624555229396,"sku":"PAC-06-229","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5ff5f2c8-e8ec-4605-a4dd-c84d1c5dc8b5.jpg?v=1788643321"},{"product_id":"oem-key-cover-handle-assembly","title":"Hayward Genuine OEM Vari-Flo XL Filter Valve Key Cover Handle Assembly, SPX0714BA","description":"\u003cp\u003eThe Hayward SPX0714BA is the genuine key, cover and handle assembly for the SP0714T Vari-Flo XL top mount valve, the multiport valve on Hayward Pro Series and other top mount sand filters. It is effectively the whole upper half of the valve: a fully assembled cover with the handle, handle pin, spring and washers, plus the rotor and spider gasket underneath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater leaking out of the backwash port. When the spider gasket or rotor wears, the valve can no longer seal the ports off from one another and water finds its way to backwash while the filter runs. Replacing the assembly restores the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the SP0714T (SP-714) valve on Hayward top mount filters including the S166T, S180T, S190T, S210T, S220T, S230T, S244T and S270T.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover o-ring, part SPX0714L, is not included. It is worth ordering alongside so the valve goes back together with a fresh seal.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624831529172,"sku":"HAY-061-2138","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_99497112-16b6-4fcb-99bf-b99eb1fff0b3.jpg?v=1788643127"},{"product_id":"valve-1-5-6-way-clamp-style","title":"Pentair Genuine OEM HiFlow Valve 1.5 in. 6-Way Clamp Style, 262506","description":"\u003cp\u003eThe Pentair 262506 is the genuine HiFlow six position top mount multiport valve for Tagelus sand filters, supplied as a kit with the clamp and pressure gauge. It is the 1-1\/2 in. clamp style valve with a 6-1\/2 in. flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for years on the tank\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve body is corrosion resistant PVC and the diverter is heavy duty Noryl. A large one piece handle moves the six position positive lock diverter, which includes a dedicated winterizing position for closing the system down at the end of the season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDesigned for the Pentair Tagelus, the same valve appears in the parts breakdowns for the Pentair Sand Dollar and Meteor, the American Products Eclipse and the Sta-Rite Cristal-Flo II top mount filters. Confirm the 6-1\/2 in. flange and 1-1\/2 in. plumbing before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne top mount valve assembly, one pressure gauge and one clamp assembly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624832446676,"sku":"PAC-06-248","price":203.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6355f681-fefa-47a9-bec0-bd119949476f.png?v=1788643219"},{"product_id":"fns-plus-element-assembly-complete-48-sqft","title":"Pentair Genuine OEM FNS Plus Element Assembly Complete, 48 Sq Ft, 59023400","description":"\u003cp\u003eThe Pentair 59023400 is the complete element grid assembly for the FNS Plus 48 sq ft DE filter, model FNSP48. It is the genuine Pentair part, and it replaces the entire grid set in one go.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the whole assembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDE grids wear together. When one has torn fabric or a blinded coat, the rest are usually not far behind, and swapping the complete assembly puts 48 sq ft of fresh filter area back in the tank without piecing grids onto an old set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the filter is the 48 sq ft FNS Plus. The assembly ships in a box 18.75 in. long, 19.0 in. wide and 30.5 in. high. The tank o-ring is not included; the 20-7\/8 in. ID o-ring for this tank is listed separately.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624832512212,"sku":"AMP-051-4018","price":393.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7b9c42a9-315b-4823-ad12-b678edf94b7f.png?v=1788643249"},{"product_id":"element-assembly-complete-36-sqft","title":"Pentair FNS Plus Filter Element Assembly Complete 36 Sqft, 59023500","description":"\u003cp\u003eThe Pentair 59023500 is the complete internal grid assembly for the 36 sq ft FNS Plus DE filter. Rather than a loose set of grids to fit one at a time, it arrives as the whole element: manifold, grids, grid retainer and thru rod, assembled and ready to set into the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace the element\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDE grids wear over years of backwashing and acid washing. Torn fabric lets DE pass back to the pool, blinded fabric shortens the cycle between cleanings, and a cracked manifold bypasses the grids altogether. If more than one or two grids are past saving, replacing the assembly as a unit is faster than rebuilding and gets the filter back to its rated flow in one step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis assembly is sized for the 36 sq ft FNS Plus tank. The 48 and 60 sq ft models take taller grids and a different part number, so check the label on your tank before ordering. It is the genuine Pentair part listed on the FNS Plus parts diagram.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624832872660,"sku":"AMP-051-4017","price":357.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_422abc41-a697-4f7e-b870-1b068447891b.jpg?v=1788642929"},{"product_id":"2-valve-kit-multiport-side-mound-de-filters-sm20-2","title":"Pentair 2\" Valve Kit Multiport, Side Mount DE Filters SM20-2, 261152","description":"\u003cp\u003eThe Pentair 261152 is the SM20-2 side mount multiport valve kit for Pentair FNS, FNS Plus and NSP DE filters. It has 2 in. PVC connections and a 7.5 in. centerline between the filter ports, which is the spacing on those side mount tanks. The kit includes the lock nuts that screw down onto the filter bulkheads to hold the valve tight and leak free.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo measurements settle whether this is the right valve: the plumbing size and the port spacing. This one is 2 in. with a 7.5 in. centerline. The same valve in 1.5 in. is the SM10-2, part 261153. If you are not sure, measure center to center across the two filter ports before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith the pump off and the system depressurized, unscrew the old lock nuts, lift the old valve off the bulkheads, seat the new valve and tighten the new nuts. The 2 in. PVC connections then glue up to the pump, return and waste lines in the usual way.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624832938196,"sku":"PAC-06-230","price":297.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f46d1517-4082-4426-86b6-75cdeccf66fc.jpg?v=1788642936"},{"product_id":"vari-flo-1-5-valve-with-gauge-sand-filters","title":"Hayward Vari-Flo 1.5\" Side Mount Multiport Valve for Sand Filters, SP0710X62","description":"\u003cp\u003eThe Hayward SP0710X62 is the Vari-Flo side mount multiport valve for the Pro Series S210S, S244S and S310S sand filters, sold with a side mount pressure gauge. It has 1.5 in. plumbing ports and a 6 in. centerline between the valve ports that connect to the filter tank, with 3-1\/2 in. inside between the pipes at the ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirming fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis valve fits only the three side mount Pro Series models listed. The easiest check is on the old valve: SP710XA-13 is stamped into the body just below the pump port, and patent number 3640310 is stamped into the lid. Measure the port centerline as well. If the filter is plumbed in 2 in., the correct valve is the SP0715X62, the 2 in. version of the same design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Vari-Flo lever selects filter, backwash, rinse, waste, recirculate, closed and winter, so backwashing and vacuuming to waste are a matter of shutting the pump off and turning the handle. The included gauge threads into the side of the valve and is the reference for when a backwash is due.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624832970964,"sku":"HAY-06-253","price":188.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6bf13a44-0f9d-491d-a113-4eddcb093942.png?v=1788642946"},{"product_id":"element-assembly-complete-60-sqft","title":"Pentair 60 Sq Ft Element Assembly Complete, 59023300","description":"\u003cp\u003eThe Pentair 59023300 is the complete grid element assembly for the 60 sq ft FNS Plus DE filter. It includes the full set of 30 in. tall grids already mounted on the manifold with the rods, so the whole internal assembly comes out and goes in as one piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace the assembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTorn grid fabric sends DE back to the pool and a cracked manifold does the same. If more than a grid or two is damaged, or the manifold itself is suspect, the complete assembly is the cleaner repair than rebuilding a used manifold with new grids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your filter is the 60 sq ft FNS Plus. While the tank is open, check the clamp, tank o-ring and inlet pipe assembly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624833102036,"sku":"AMP-051-4019","price":444.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9a81f71e-4249-425a-8eaf-6af3cb1c043c.png?v=1788643047"},{"product_id":"closure-kit-8-1-2-buttress-thread","title":"Pentair Genuine OEM 8-1\/2\" Triton II Buttress Thread Closure Kit, 154856Z","description":"\u003cp\u003eThe Pentair 154856Z is the 8-1\/2 in. buttress thread closure kit for Triton II and Triton C-3 side mount sand filters. It is the genuine Pentair part, also listed under the older number 154856.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich filters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTriton II models TR40, TR50, TR60, TR100 and TR140, and the commercial TR100C, TR140C and TR100C-3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is needed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe closure is the large threaded fitting that seals the top of the tank. When it weeps under pressure, cracks from over tightening or the threads strip, a new closure kit is the fix. Pentair makes a plastic wrench for the 8.5 in. closure, and a little o-ring lubricant on the seal helps it seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck that your closure is 8-1\/2 in. with buttress threads. The smaller 6 in. closures come in both V thread and buttress thread versions and are different kits.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624833167572,"sku":"PAC-051-2821","price":227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7bd60c29-2e82-4bb6-a1ff-7673ce4fb917.jpg?v=1788643051"},{"product_id":"pentair-178546z-clean-and-clear-rp-tank-lid-200-sqft","title":"Pentair 150 sq ft and 200 sq ft Clean \u0026 Clear Replacement Tank Lid, 178546Z","description":"\u003cp\u003eThe Pentair 178546Z is the replacement tank lid for the Clean \u0026amp; Clear RP cartridge filters in the 150 sq ft and 200 sq ft sizes. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003eLike the tank it closes, the lid is injection molded polypropylene reinforced with fiberglass, so it does not corrode and it holds its shape under pressure. Sun and years of clamp cycles eventually crack or warp the original, and a lid that no longer seats flat will weep at the clamp no matter how often you change the o-ring.\u003c\/p\u003e\u003cp\u003eThis is the lid only. The locking ring assembly, tank o-ring and manual air relief valve are separate parts. Check the Clean \u0026amp; Clear RP parts diagram to confirm what else your filter needs.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624871276756,"sku":"AMP-051-1412","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d7e6c7ba-65d3-4834-a6a5-2d8c64852132.png?v=1788647670"},{"product_id":"bulkhead-fitting","title":"Hayward Bulkhead Fitting for S200 and S240 Sand Filters, SX200D","description":"\u003cp\u003eThe Hayward SX200D is the bulkhead fitting for the S200 and S240 side mount sand filters. It is the connection that passes through the tank wall and joins the filter to the multiport valve plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLook at it whenever the tank is weeping at the port and a new o-ring has not cured it. A fitting that has cracked, gone brittle in the sun or lost its threads will keep leaking no matter how many o-rings go in. This is the genuine Hayward part, so it matches the tank opening and the valve connection exactly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder the o-ring too\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bulkhead o-ring is sold separately. Fit a new one whenever the fitting is removed.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624871506132,"sku":"HAY-051-2188","price":41.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4081ea06-530c-42b6-a787-56e0e78cd7c5.png?v=1788647690"},{"product_id":"side-mount-pressure-gauge-with-indicator","title":"SuperPro Side Mount Pressure Gauge with Indicator, 81060BU","description":"\u003cp\u003eThe SuperPro 81060BU is a side mount pressure gauge for pool filters, with a 1\/4 in. fitting on the bottom of the gauge and a set indicator needle on the face. It threads into the gauge port on sand, DE and cartridge filters and their multiport valves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the indicator matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA filter's clean pressure is the reading right after a backwash or cartridge clean. Set the indicator needle there and the gauge shows you how far pressure has climbed since. Once the live needle is 8 to 10 psi above the indicator, it is time to clean the filter, no notebook required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSide mount means the stem comes out of the bottom, for ports that face down. It is the gauge found on Hayward® Pro Series and S200 series sand filters, Pentair Tagelus, Sta-Rite Cristal-Flo and System 2 filters, Jacuzzi DVK-6 and DVK-7 dial valves and a long list of others. If your port faces sideways, the back mount version is the one you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplace it when\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe needle no longer drops to zero with the pump off, sticks, or the face has fogged. A gauge that reads wrong is worse than no gauge, because it lets a dirty filter go unnoticed.\u003c\/p\u003e","brand":"American Granby","offers":[{"title":"Default Title","offer_id":48624871571668,"sku":"SPG-06-1001","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default.gif?v=1788647695"},{"product_id":"clamp-kit-with-tension-control","title":"Pentair Genuine OEM Clamp Kit with Tension Control, 190003","description":"\u003cp\u003eThe Pentair 190003 is the tank clamp kit for the Clean and Clear Plus cartridge filters, FNS Plus DE filters and Quad DE filters. The same tanks were sold under the PacFab and American Products names, and this kit fits those too. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe metal clamp band, a washer and the spring barrel nut assembly. The spring is the tension control: it keeps an even load on the band as you tighten, so the tank halves seal evenly and the clamp is not overtightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clamp measures roughly 23-1\/4 in. long, 22-1\/4 in. wide and 2-1\/4 in. high. Pentair has changed the finish from the original to black; the fit and part number are the same, so do not be surprised if the new clamp does not match the colour of the one coming off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplace the clamp if the band is corroded, bent or stretched, or if the barrel nut threads are damaged. A clamp that will not hold tension is a safety issue on a pressurised tank, so do not try to repair one.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624871735508,"sku":"PAC-051-1646","price":301.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a9783024-368f-4323-bc9c-61dc6d850e14.jpg?v=1788647699"},{"product_id":"vari-flo-1-5-valve-s200-s240","title":"Hayward Vari-Flo 1.5 in. Multiport Valve (S200 and S240), SPX0710X32","description":"\u003cp\u003eThe Hayward SPX0710X32 is the Vari-Flo multiport valve for the S200 and S240 sand filters. It is made for those two filters and their 1.5 in. plumbing, and it is the replacement and upgrade for any filter that came with the older SP071113 valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix positions, one lever\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFilter, backwash, waste, rinse, closed and recirculate are selected with the lever action handle. An integral sight glass shows the backwash water, so you can watch it run clear before switching to rinse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for flow\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve body is molded from Hayward's PermaGlass XL material and engineered for maximum flow through the filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBefore ordering, look for SP710XA-13 stamped into the valve body below the pump port, S-200-N on the bottom sweep elbow and S 200 P on the top filter connection. The valve to filter port center line measures 5 in. If your valve matches, this is the part.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624871932116,"sku":"HAY-06-238","price":272.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f47a4ca4-c26d-43ee-a4d9-d4c985f9fcf0.png?v=1788647741"},{"product_id":"tank-bottom-assembly-clean-clear-plus","title":"Pentair Genuine OEM Tank Bottom Assembly, Clean \u0026 Clear Plus, 178578","description":"\u003cp\u003ePentair part 178578 is the replacement tank bottom assembly for the Clean \u0026amp; Clear Plus cartridge filter and the Quad DE filter. It fits filters manufactured after 11-98 and is the genuine Pentair part, so it seals to the existing lid and clamp the way the original did.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lower tank takes the load of the plumbing and the pressure of the system. When it cracks, weeps at a port or has been damaged by a freeze, the rest of the filter is usually still good. Replacing the tank bottom keeps the lid, clamp, cartridges or grids and internals in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the manufacture date on your tank label. This bottom is for filters built after November 1998. The tank o-ring and clamp kit are sold separately, and a new o-ring is the right call any time the tank is split and reassembled.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624872423636,"sku":"PAC-051-1748","price":518.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1af2254a-277d-4447-a1cc-b68dec9a1aa7.png?v=1788647789"},{"product_id":"1-5-valve-kit-multiport-side-mound-de-filters-sm10-2","title":"Pentair 1.5\" Multiport Valve Kit for Side Mount DE Filters, SM10-2, 261177","description":"\u003cp\u003eThe Pentair 261177 is the 1.5 in. side mount multiport valve kit, model SM10-2, for PacFab DE filters including the FNS, FNS Plus, Nautilus and Nautilus Plus. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSix positions and a winter setting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle locks positively into each of six positions, and there is a separate winterizing position that leaves the valve open so trapped water can drain and freeze without damage. The body is PVC, which will not corrode on an outdoor pad, and the valve is rated for 50 PSI working pressure and 75 GPM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis valve mounts on the side of the filter with 7 1\/2 in. between port centers and 1.5 in. plumbing. If your filter is plumbed in 2 in., the SM20-2 is the matching 2 in. kit.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624873210068,"sku":"PAC-06-233","price":215.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dff6f29c-5a59-40da-a705-8dd4fdcc592c.jpg?v=1788647895"},{"product_id":"1-1-2-top-mount-multiport-valve-2002-after","title":"Waterway 1-1\/2\" Top Mount Multiport Valve (2002 \u0026 After), WVS003","description":"\u003cp\u003eThe Waterway WVS003 is the seven position, 1-1\/2 in. top mount multiport valve for Waterway sand filters built in 2002 and after. It is the backwash valve on the TWM, Clearwater, Carefree and Baquapure filters, and on the same filter sold under other names: Rec Warehouse 4742-010, Baquapure 111960, Premium Blue, Cyclone, Sparko, Eco Kleer, Aquastar Blue Star and Aqua Coastal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the year\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway changed the valve in 2002. This one fits 2002 and later filters; a filter from 2001 or earlier takes a different valve kit. If you are not sure, look for the date on the tank before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemoval tool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve collar is meant to come off with the Waterway 505-1970 removal wrench, which is not included. Have it on hand before you start the swap.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48624873242836,"sku":"WWP-06-408","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fa6a7a5d-0b0a-4708-bede-ce42ffc0d526.jpg?v=1788647899"},{"product_id":"folding-lateral-assembly-with-center-pipe-s310t","title":"Hayward Folding Lateral Assembly With Center Pipe for S310T Sand Filters, SX310DA2","description":"\u003cp\u003eThe Hayward SX310DA2 is the folding lateral assembly with center pipe for the Pro Series S310T sand filter. It is the genuine Hayward part: ten swivel style laterals on a 29-1\/4 in. center pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe laterals sit at the bottom of the sand bed and collect filtered water evenly from across the tank, then carry it up the center pipe to the valve. Even distribution is what lets the whole bed do its share of the work. When a lateral cracks, sand ends up back in the pool, and the assembly is the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe swivel laterals fold up against the pipe so the assembly fits through the tank opening, then swing out flat once it is inside. Set it in an empty tank, fill around it with sand and refit the valve. It is built from durable materials to last for years under sand and water.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624873308372,"sku":"HAY-051-8262","price":167.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a4811288-bc89-4d07-a608-33864c829066.png?v=1788647907"},{"product_id":"internal-bulkhead-assembly","title":"Pentair Genuine OEM 2 in. Triton II Bulkhead Kit, 154714Z","description":"\u003cp\u003eThe Pentair 154714Z is the genuine internal bulkhead assembly for the Triton II side mount sand filter. It is the fitting that passes through the tank wall and gives the multiport valve its 2 in. connection, so when it cracks or the seal gives up, water weeps at the side of the tank and no amount of tightening the valve union fixes it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTriton II models TR50, TR60, TR100 and TR140, and select Purex filters that used the same tank. You may see the part listed as 154714 without the Z; it is the same kit under Pentair's current number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDrain the tank below the port, remove the valve and back the old bulkhead nut off with a 2 in. bulkhead wrench. Seat the new assembly, tighten the nut evenly with the same wrench, then reconnect the valve. Pulling it with the wrench rather than pliers keeps the load square on the fiberglass tank.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624873341140,"sku":"PAC-051-5288","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8d8a56eb-547b-4c7a-ba8b-b76ed5c9a97e.jpg?v=1788647911"},{"product_id":"hayward-cx225xrem-swimclear-c225sc-225-sqft-cartridge-filter","title":"Hayward SwimClear C225SC 225 Sq Ft Filter Cartridge CX225XREM","description":"\u003cp\u003eThe Hayward CX225XREM is the genuine 225 square foot cartridge element for the SwimClear C225SC cartridge filter. It is the single pleated element that does all the filtering in that tank, so a fresh one restores the flow and clarity the filter had when it was new.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SwimClear C225SC and the SwimClear C200S, and the Blue Haven exclusive SmartFilter system that uses the same element. The element ships on its own; the tank, lid, lock ring and o-ring are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHose the element down whenever the pressure gauge climbs above its clean reading. Once a good cleaning no longer brings the pressure back down, or the pleats are torn or collapsing, cleaning has done all it can and the element needs replacing. The swap needs no tools: unlatch the lid, lift out the old element and set the new one in place.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624873373908,"sku":"HAY-051-9893","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c744c808-dba0-4ad6-a31e-d014ec57d5e4.jpg?v=1788647924"},{"product_id":"gauge-air-release-assembly","title":"Jandy Genuine Replacement Gauge with Air Release Assembly, R0357200","description":"\u003cp\u003eThe Jandy R0357200 is the genuine pressure gauge and air release assembly fitted to Jandy cartridge, sand and DE filters. The gauge tells you when the filter needs cleaning; the air release bleeds trapped air from the top of the tank after the lid has been off. This assembly replaces both together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCV340, CV460 and CV580 and CL340, CL460 and CL580 cartridge filters, JS60-SM and JS100-SM sand filters, and DEV48, DEV60, DEL48 and DEL60 DE filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA gauge that sticks, reads high, or never returns to zero leaves you guessing about filter pressure, and a guess usually means the filter runs dirty too long. The R0357200 has a clear, easy to read dial and corrosion resistant construction, so it keeps giving a straight answer season after season. Wrap the threads with PTFE tape, thread it in hand tight plus a modest turn, and do not overtighten.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624873570516,"sku":"TLD-101-6000","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_891aa019-6afb-4c85-a2e0-ca7fc6cd9ced.jpg?v=1788647946"},{"product_id":"tank-top-cl580-del60","title":"Jandy Tank Top CL580\/DEL60, R0357300","description":"\u003cp\u003eThe Jandy R0357300 is the replacement tank top for the CL580 cartridge filter and the DEL60 D.E. filter. It is the genuine Jandy part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecial order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is typically a special order item with limited quantities, so plan for a longer lead time than a stocked part. It replaces the upper half of the filter tank when the original is cracked or damaged, without replacing the whole filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck before ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your filter is a CL580 or DEL60 from the model plate. The bottom tank assembly and the tank body o-ring are separate parts; if the o-ring is old, it is worth replacing at the same time.\u003c\/p\u003e","brand":"Waterpik Technologies","offers":[{"title":"Default Title","offer_id":48624874160340,"sku":"TLD-051-5042","price":600.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d2e1af41-c29a-44ed-a00f-3a82615600c9.jpg?v=1788648015"},{"product_id":"lid-assembly-ccp-420-quad-80","title":"Pentair Genuine OEM Lid Assembly, CCP 420 \/ Quad 80, 178581","description":"\u003cp\u003eThis is the genuine Pentair tank lid assembly, part number 178581, for the Clean and Clear Plus 420 sq. ft. cartridge filter and the Quad DE 80 filter. It is the almond (tan) lid that matches the original tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lid that has cracked, chalked from sun exposure or been damaged during a cartridge change needs to be replaced rather than patched, since it carries system pressure. This assembly is the direct factory replacement, so it seats on the tank base and under the clamp exactly like the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your filter is a Clean and Clear Plus 420 or a Quad DE 80. The tank o-ring and the clamp kit are not included; if the o-ring is flattened or the clamp is corroded, replace them at the same time so the new lid seals properly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624874422484,"sku":"PAC-051-8581","price":341.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d8c72548-4578-46dd-99f2-e3fc8768e909.gif?v=1788648041"},{"product_id":"air-relief-valve-kit","title":"Pentair Genuine OEM High Flow Manual Air Relief Valve, 98209800","description":"\u003cp\u003eThis is the genuine Pentair high flow manual air relief valve assembly, part number 98209800, complete with the pressure gauge. It is the valve on top of the tank that you open to bleed air after a cartridge change or a restart, and the gauge next to it that tells you when the filter needs cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists it for the Clean and Clear, Clean and Clear Plus, FNS Plus and Quad DE filters and the EasyClean above-ground DE system. It also fits the American Products Eclipse side mount, Titan CM DE, Quantum CM, Quantum stainless steel, Quantum RPM and Predator filters, as well as American Products separation tanks. Pentair refers to it as the HFMARV, the High Flow Manual Air Relief Valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA gauge that reads zero with the pump running or sticks at one number, a valve that weeps when closed, or a cracked body are all reasons to swap the assembly. Because the gauge and valve come together, one kit restores both at once and the filter goes back to reading and bleeding correctly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624874684628,"sku":"AMP-051-4016","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cb732bb6-fdfc-41cb-bb19-fa1294408ddb.png?v=1788648073"},{"product_id":"lid-assembly-pacfab-2-top-side-mount-valve","title":"Pentair Lid Assembly, PacFab 2\" Top\/Side Mount Valve, 270067","description":"\u003cp\u003eThis is the genuine Pentair replacement lid assembly for the PacFab HiFlow 2 in. multiport valve, part 270067. It fits both the top mount 261055 and the side mount 261152.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve top assembly, a lid o-ring and two position labels, one for DE and one for sand, so the same kit serves either filter type. Apply the label that matches your filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid assembly replaces the top of the valve. The valve body stays plumbed in place, so the job is unbolting the old top, seating the new o-ring and bolting the new top down.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624875438292,"sku":"PAC-061-0067","price":225.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_107c0a48-adc8-4ee9-9f20-8579ccb3f894.jpg?v=1788648422"},{"product_id":"pentair-196090-easyclean-ec90-element-retro-kit","title":"Pentair EasyClean EC90 Element Retro Kit, 196090","description":"\u003cp\u003eThe Pentair 196090 is the element retro kit for the EasyClean EC90, Pentair's aboveground pool DE filter system. It is the genuine Pentair replacement element, supplied as a retrofit kit for the EC90 tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is specific to the EC90. The smaller EC60 uses a different quad style cartridge and is not covered by this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplace the element when cleaning no longer brings the filter pressure back to its clean reading, or when the element is torn or collapsed.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624875536596,"sku":"PAC-051-0181","price":190.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_88559920-645c-49f7-8a14-8625ecb20ce6.jpg?v=1788648430"},{"product_id":"r0462400-filter-cartridge-element-cs200","title":"Jandy Genuine OEM Filter Cartridge Element for CS200 Filter, R0462400","description":"\u003cp\u003eThe Jandy R0462400 is the genuine replacement cartridge element for the Jandy CS200 cartridge filter. It is the element the filter shipped with, so pleat count, end caps and fit match the tank exactly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e33 in. long, 8-7\/8 in. outside diameter, 4 in. inside diameter. If you are replacing an element without the original box, those three numbers against your old cartridge confirm you have the right one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCleaning versus replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cartridge lasts several seasons if it is hosed off when the pressure rises and soaked in a cartridge cleaner once or twice a year to strip oils and scale that hosing leaves behind. When pressure stays high after a proper clean, or the pleats are torn, frayed or starting to collapse, it is time for a new element. Swapping it is a matter of opening the filter, lifting out the old one and setting this one in.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624877174996,"sku":"TLD-051-1902","price":276.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_502a564f-c6d3-40be-985e-7b97e4d1a5ce.jpg?v=1788648503"},{"product_id":"key-cover-and-handle-assembly-black","title":"Hayward Vari-Flo Key Cover and Handle Assembly, Black, SPX0710XBA17","description":"\u003cp\u003eThe Hayward SPX0710XBA17 is the genuine key, cover and handle assembly in black for the SP0710, SP0710X, SP0711 and SP0712 1-1\/2 in. Vari-Flo multiport valves. It replaces the whole top of the valve in one piece: the cover, the key that diverts water beneath it and the handle that turns it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePositions and ratings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReading clockwise the six positions are Backwash, Recirculate, Rinse, Filter, Waste and Closed. The assembly carries the valve's ratings of 50 PSI (3.4 bar) rated pressure, 60 GPM rated flow and 10 PSI (0.7 bar) maximum head loss. The lid is stamped Patent No. 3640310, a quick way to confirm you are looking at a valve from this family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover o-ring is not included and must be bought separately. Since the o-ring is the seal between this assembly and the valve body, plan to fit a new one at the same time rather than reusing a flattened one. A white version of the same assembly is also available if you prefer to match an older valve.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624877306068,"sku":"HAY-061-2109","price":136.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_27eddd97-f177-4895-b21a-d5068118ab2c.jpg?v=1788648520"},{"product_id":"hayward-cx200b-filter-head-assembly-c200s","title":"Hayward C200S SwimClear Filter Head Assembly, CX200B","description":"\u003cp\u003eThe Hayward CX200B is the genuine replacement filter head assembly for the SwimClear C200S cartridge filter. When the original head cracks, warps or will no longer hold a seal, this is the OEM part that puts the filter back in service without changing anything else on the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe CX200B is made for the SwimClear C200S. It is the complete head, so it sets straight onto the tank body and clamps down as the original did.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward no longer supplies this head in tan; the current color is what ships. While the filter is open, it is worth fitting a fresh lid o-ring so the new head seals cleanly the first time it is pressurized.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624877437140,"sku":"HAY-051-9905","price":410.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b75b3be3-f0f2-4104-82af-2648c859d170.png?v=1788648537"},{"product_id":"pentair-152237-2-ta60-standpipe-assembly","title":"Pentair 2\" TA60 Standpipe Assembly, 152237","description":"\u003cp\u003eThe Pentair 152237 is the 2 in. standpipe and piping assembly with hub for the Tagelus TA60 sand filter. It is the genuine Pentair replacement for the filter's internal piping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside a sand filter, water passes down through the sand bed, is collected by the laterals at the bottom, and travels back up the standpipe to the valve. If the standpipe or hub cracks, sand gets past it and shows up in the pool. Replacing the assembly is the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlanning the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe standpipe runs the full height of the tank with the hub at the base, so replacing it means removing the sand. Since the media has to come out anyway, most owners take the opportunity to install fresh sand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis assembly is for the TA60 with 2 in. plumbing. Pentair lists a separate piping assembly with hub for the TA60D, so check the model number on your filter tank.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624878059732,"sku":"PAC-051-1300","price":110.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_aed03719-ff5e-4790-87f3-328cf16fb595.jpg?v=1788648595"},{"product_id":"hayward-cx3030h-swimclear-lower-piping-assembly","title":"Hayward SwimClear Lower Piping Assembly, CX3030H","description":"\u003cp\u003eThe Hayward CX3030H is the lower piping assembly for SwimClear cartridge filters, the internal piping at the base of the tank. It is the genuine Hayward part for filters manufactured after September 2012.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the date on your filter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSwimClear filters built before 2012 used a different assembly, the CX3020FB, which is now obsolete. The CX3030H does not replace it, so confirm your manufacture date from the tank label before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModels\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward lists this assembly with the C200SC and C225SC SwimClear filters. Replacing a cracked or broken lower piping assembly restores the seal so water passes through the cartridges instead of around them.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624879304916,"sku":"HAY-051-9856","price":141.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_234f6582-7e29-44aa-a0be-56b141365697.jpg?v=1788648697"},{"product_id":"starclear-c200s-cartridge-filter","title":"Hayward Genuine OEM SwimClear C200S Filter Cartridge, CX200XRE","description":"\u003cp\u003eThe Hayward CX200XRE is the genuine replacement cartridge for the SwimClear C200S filter. It carries the full 200 sq. ft. of filter area the tank was designed around, measures 10-1\/4 in. in diameter by 28-1\/8 in. long, and drops into place without tools or plumbing work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePleated for capacity\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pleated media packs a lot of surface into the tank, so it holds dirt, fine debris and other contaminants for longer between hose downs and keeps water clear through the swim season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross reference\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you have been buying an aftermarket element, this is the original behind it. The CX200XRE replaces Unicel C-9442, Pleatco PA200S, FC-1267, CP-C200S and CS200E.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTurn the pump off and bleed pressure at the tank, open the tank, lift the old cartridge out, set the new one in its place and close the tank. Rinse the element and reset the pressure gauge baseline as you normally would.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624879370452,"sku":"HAY-051-249","price":202.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_248cf9c7-7f5f-41b3-85b1-9c3921c1412d.png?v=1788648705"},{"product_id":"key-seal-diverter-assembly","title":"Hayward Key Seal Diverter Assembly, SPX0714CA","description":"\u003cp\u003eThe Hayward SPX0714CA is the key seal diverter assembly for the SP0714T Vari-Flo XL, the 1-1\/2 in. top mount multiport valve found on Hayward Pro Series and SandMaster sand filters. The spider gasket comes molded into the bottom of the diverter, and because Hayward does not sell that gasket separately, this assembly is the way to replace it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA worn spider gasket lets water bypass inside the valve. The usual signs are water trickling out the waste line or returning to the pool unfiltered while the handle is set to Filter. Swapping the diverter restores the seal between positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the match\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRemove the key cover handle assembly and look at the underside of the old diverter. The matching part has SP0714C stamped into it. This is the genuine Hayward plastic diverter with the seal already in place.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624879534292,"sku":"HAY-061-2141","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b877aa1c-8a7e-4416-8a76-8ee5fe0d0a6d.jpg?v=1788648735"},{"product_id":"top-housing-assembly-cs100-cs150","title":"Jandy Top Housing Assembly CS100, CS150, R0461900","description":"\u003cp\u003eThe Jandy R0461900 is the gray top housing for CS100 and CS150 cartridge filters, the upper half of the tank that lifts off to reach the cartridge. It is the genuine Jandy part, made to the original dimensions so it seats and seals against the bottom tank exactly as the factory housing did.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA top housing usually needs replacing after a crack, a chip around the sealing edge, or long sun exposure that has left the plastic brittle. Swapping the housing is far cheaper than a new filter and keeps the rest of the CS unit in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the filter label for CS100 or CS150. The housing ships on its own; the 100 sq ft and 150 sq ft cartridges are separate parts, and a filter that is being opened up anyway is a convenient time to fit a new one.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624879861972,"sku":"TLD-051-1900","price":326.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_62567a69-ee84-4329-a094-a91c1f2e9ed1.jpg?v=1788648793"},{"product_id":"top-valve-assembly-hi-flow-1-1-2","title":"Pentair Genuine OEM 1.5\" HiFlow Valve Top Assembly, 272531","description":"\u003cp\u003eThe Pentair 272531 is the top assembly for the PacFab 1.5 in. HiFlow six way multiport valve, complete with the diverter and its gasket. Those are the parts that take the wear every time the handle is moved, and replacing them as a set is the usual fix when a HiFlow valve starts leaking to waste or refuses to hold pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe HiFlow valve is the one fitted to the Pentair PacFab Sand Dollar SD35, SD40 and SD60 sand filters, and this top is also listed for the 261124, 261130 and 262506 top mount 1.5 in. valves. Confirm your valve is the 1.5 in. HiFlow before ordering; the 2 in. valves use different parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is and is not in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYou get the valve top, diverter and gasket. The handle, the valve top o-ring and the pressure gauge are separate parts. Since the valve is apart for this job anyway, it is worth checking the top o-ring at the same time.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624880255188,"sku":"PAC-051-1776","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f9a2c566-36ab-4cbe-9a93-2f537ddf4f37.png?v=1788648863"},{"product_id":"pentair-272568z-valve-top-assembly-for-sta-rite-6-position-top-mount-clamp-on-multiport-valve","title":"Pentair 6-Position Top Mount Clamp Valve Top Assembly, 272568Z","description":"\u003cp\u003eThe Pentair 272568Z is the valve top assembly for the Sta-Rite 263085 six position top mount clamp-on multiport valve. When a multiport valve leaks or will not hold its position, the wear is almost always in the top, and this assembly replaces that section while the valve body stays on the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made for the clamp-on style of the six position top mount valve, model 263085. Check that your valve is the clamp-on version before ordering, because the threaded and bolted top mount valves take different tops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish the job properly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve body o-ring, the sight glass and the drain plug o-ring are separate parts. The body o-ring in particular should be replaced any time the top is removed, so order it alongside the top if yours has been in service for a while.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624880386260,"sku":"PAC-051-3071","price":151.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_117cd2c8-a69c-48fb-8898-1307fc07cd55.jpg?v=1788648880"},{"product_id":"jandy-r0501300-complete-grid-assembly-dev-del-48-sqft","title":"Jandy Complete Grid Assembly for DEV\/DEL 48 Sq Ft Filters, R0501300","description":"\u003cp\u003eThe Jandy R0501300, also sold under the Zodiac name, is the complete grid assembly for the 48 sq ft DEV and DEL DE filters. It is the full grid set and the manifold in one pre-assembled unit, which makes it the quick way to bring a tired DE filter back to full filtration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for the tank\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly is shaped to fit the DEV48 and DEL48, and the grids and frame are made from materials chosen to resist pool chemicals and UV over many seasons. The manifold distributes water evenly across the grids so the entire 48 sq ft of filter area is working.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause it arrives assembled, the job is to open the tank, lift out the old grid assembly and set the new one in place. There is no stacking individual grids or lining up a manifold on the bench.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 60 sq ft DEV60 and DEL60 filters use a different complete assembly, so confirm your filter is the 48 sq ft model before ordering.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624880419028,"sku":"R0501300","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_68f0e27f-3720-4ee2-b7ee-6a7562c57f32.jpg?v=1788648884"},{"product_id":"lateral-hub-assembly-s244s-s220s","title":"Hayward Lateral Hub Assembly (S244S, S220S), SX242MA1S","description":"\u003cp\u003eThe Hayward SX242MA1S is the folding umbrella lateral assembly with center pipe for the Pro Series side mount S220S and S244S sand filters. It comes as one assembly: the hub, the laterals and the center pipe, so there is no threading individual laterals into a hub inside the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and history\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the S220S and S244S built after 1999, and it replaces the earlier SX242MA1. Hayward made the new version backward compatible, so it goes into the filters that originally shipped with the old number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the folding design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe laterals fold up against the center pipe so the whole assembly passes through the tank opening, then unfold to lie flat on the tank floor under the sand. That is what makes a lateral swap possible without cutting the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiagnosis\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSand blowing back into the pool through the returns almost always means a cracked lateral. Drain the sand, inspect, and if any lateral is damaged replace the assembly rather than hunting for a single lateral.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624880550100,"sku":"HAY-051-1373","price":130.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3121fc85-4fe1-4f89-a439-a3b4b2c7857b.png?v=1788648900"},{"product_id":"jandy-tank-top-cl340-cl460","title":"Jandy CV Series Cartridge Filter Tank Top R0554700","description":"\u003cp\u003eThe Jandy R0554700 is the upper half of the filter tank on the CV and CL series cartridge filters and the DEV and DEL series DE filters. It is the genuine Jandy part, packaged under the Jandy or Zodiac name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the CV340, CV460, CL340, CL460, DEV48 and DEL48. Check the model on your filter label against that list; the 580 cartridge and 60 sq ft DE sizes take a different top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tank top only. The tank body o-ring, the clamp ring assembly, the gauge and the internal manifold are separate parts. If the o-ring is flattened, cracked or has been in service for years, replace it while the tank is open so the new top seals properly on the first try.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624880648404,"sku":"TLD-051-5027","price":522.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_74525b92-e377-4fe7-b238-9fe54a3e38d5.jpg?v=1788648912"},{"product_id":"star-clear-plus-filter-head-w-vent-valve-c1200","title":"Hayward Star Clear Plus Filter Head with Vent Valve C1200, CX1200B","description":"\u003cp\u003eThe Hayward CX1200B is the filter head for the Star Clear Plus C1200 cartridge filter. It is the genuine OEM part, and most units have C-1200B molded on the inside of the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is on it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn air relief vent valve for bleeding trapped air from the tank, and a threaded hole for a pressure gauge so you can watch filter pressure and know when to clean the cartridge. The head is 12-3\/4 in. tall with a 1 in. inside diameter hole at the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward has moved production of this head from tan to black. The part you receive may be black even if your existing tank is tan; the fit and function are unchanged.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pressure gauge, the head o-ring and the locking knob are separate parts.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624880746708,"sku":"HAY-151-1506","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_40ac9893-be3d-4fdc-a3db-d483e28ad56e.jpg?v=1788648924"},{"product_id":"metal-reinforced-seal-swimclear-pro-grid-filters","title":"Hayward Metal Reinforced Seal for SwimClear and Pro-Grid Filters, DEX2422Z2","description":"\u003cp\u003eThe Hayward DEX2422Z2 is the tank seal that sits between the two halves of a Pro-Grid DE or SwimClear cartridge filter. Unlike a plain o-ring, it has a metal ring molded inside, which keeps the gasket seated in its groove while the clamp is drawn down and stops it from stretching or rolling out under pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits Pro-Grid DE2420, DE3620, DE4820, DE6020 and DE7220 DE filters and SwimClear C2020, C3020, C4020 and C5020 cartridge filters. It applies only to tanks built after March 2009 that use the DEX2421JKIT aluminum clamp. Earlier tanks take a different seal, so check the build date on the tank label before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOutside diameter is 20-5\/8 in. and inside diameter is 19-7\/8 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean both tank flanges, seat the seal in the groove without lubricant that could let it slip, then fit and tighten the clamp evenly. If the tank has been weeping at the belt line after a clean and reassemble, a tired seal is the usual cause.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624881107156,"sku":"HAY-051-2430","price":102.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c16e09d2-0c4b-4ad7-8ee9-56f3a5448d7f.jpg?v=1788649276"},{"product_id":"bulkhead-o-ring-1995-and-prior","title":"Hayward OEM Bulkhead O-Ring, SX200Z3","description":"\u003cp\u003eThe Hayward SX200Z3 is the o-ring that seals the bulkhead fittings where plumbing enters and leaves several Hayward filter tanks. It is also the o-ring for Hayward 2 in. unions. Genuine Hayward part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e2-1\/2 in. inside diameter, 2-3\/4 in. outside diameter, 1\/8 in. cross section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMicro-Clear DE2400, DE3600, DE4800 and DE6000 DE filters, including the stainless steel versions, and S200 and S240 side mount sand filters. On Super Star Clear cartridge filters, C2000, C3000, C4000, C4500, C5000 and C5500, it fits bulkheads on tanks built in 1995 and earlier. Newer Super Star Clear tanks use a different ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA drip at the bulkhead nut that does not stop with a snug turn means the o-ring has flattened. Back the nut off, roll the old ring out, clean the groove, lightly lubricate the new ring with silicone pool lube and reassemble hand tight. Filters have two bulkheads, so it is worth doing both at once.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624881205460,"sku":"HAY-051-2202","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e28c6831-9d86-4f9d-8f67-533a4c182cd4.png?v=1788649288"},{"product_id":"oem-cartridge-100-sqft","title":"Hayward OEM Filter Cartridge, 100 sq ft, CCX1000RE","description":"\u003cp\u003eThe Hayward CCX1000RE is the genuine 100 sq ft replacement cartridge for the X-Stream CC1000 series filter. The original has CC-1000-E stamped into its top end cap, which is the quickest way to confirm a match.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eX-Stream CC10092S, CC100922S, CC10092SFT, CC10092STL, CC15093S, CC150932S, CC15093SFT, CC15093STL and CC10093STUFFT. It also fits Star-Clear C225, C250 and C500 filters and HCF models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e9 in. diameter by 17 in. tall, with 100 sq ft of pleated media.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCartridges are cleaned by hosing between the pleats. Once a cleaning no longer returns the gauge to its clean-filter reading, or the end caps crack or the pleats fray, the cartridge is spent and this is the replacement. Using the genuine part keeps the rated 100 sq ft and the right end cap fit in the tank.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624881336532,"sku":"HAY-051-7008","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4724afb4-55f3-4cb1-80b4-685fafd0e6cc.png?v=1788649316"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/pool-filter-parts\/brand-filbur.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}