{"title":"Heater Parts","description":"\u003cp\u003eIgniters, heat exchangers, control boards, sensors and burner parts for pool and spa heaters.\u003c\/p\u003e\u003cp\u003eStart from the code on the heater's display. \u003ca href=\"\/pages\/pool-heater-error-codes\"\u003ePool heater error codes\u003c\/a\u003e lists what each Pentair, Hayward, Raypak and Jandy code means and the part it names.\u003c\/p\u003e","products":[{"product_id":"raypak-100-10000347-heat-pump-digital-control-board-9350-9353-5450-8450","title":"Raypak Heat Pump Digital Control Board 9350\/9353 5450-8450, 100-10000347","description":"\u003cp\u003eThe Raypak 100-10000347 is the digital control board for the 9350\/9353 control series used on Raypak 5450, 6450, 8450 and 8350 heat pumps, and it supersedes the older part number H000302. It is the Brand OEM board, the same part Raypak specifies for these units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis board is matched to the 9350\/9353 control series, so confirm the control series on your heat pump before you order. Raypak's public pages do not publish a parts fit chart for this board. Use the model number on the heat pump data plate and the part number on the board itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing an H000302\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the board you are replacing is marked H000302, order 100-10000347. Raypak replaced H000302 with 100-10000347, so the newer number is the one to use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTemperature sensors are separate parts. If your diagnosis points at a sensor rather than the board, Raypak offers a 100K temp sensor kit and an ambient temp sensor kit for the same series. Match the UPC 840328444823 against the box to confirm you have the right part.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624545792212,"sku":"RAY-151-0049","price":302.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_30e185f6-a71c-4ef6-8b96-f2a2b7ef9e52.png?v=1788643179"},{"product_id":"1-2-electronic-natural-gas-combination-valve","title":"Raypak Genuine OEM 3\/4\" IID Pool Heater Natural Gas Electronic Valve, 003900F","description":"\u003cp\u003eThe Raypak 003900F is the natural gas valve kit for Raypak IID pool heaters, the intermittent ignition models that light the pilot electronically on each call for heat. At its center is a Honeywell VR8304K4814 electronic combination valve, and Raypak packages it with the two 1\/2 in. x 3\/4 in. bushings, the valve support bracket, two #10 x 3\/8 hex head screws and the installation instructions, so the swap does not depend on reusing old hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt covers a broad run of Raypak IID heaters: the 53A, 53B, 055A, 105A, 105B, 151, 153, 153A and 0155A, and the larger models from the 181 through the 405A. That puts it on the Versa 55, Versa 155, Versa 185 through 405, and the RP2100 R185 through R405 heater families.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the natural gas version. Check your heater rating plate for the fuel type before ordering, and confirm the heater is an IID model rather than a millivolt standing pilot unit, which uses a different valve. Gas valve replacement should be done by a qualified technician and leak checked before the heater is returned to service.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624832839892,"sku":"RAY-151-3570","price":216.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f594b9f7-b459-474c-a43f-d9a235f8c414.jpg?v=1788642922"},{"product_id":"natural-gas-valve-kit-fd","title":"Hayward Natural Gas Valve Kit, FD Series, FDXLGSV0003","description":"\u003cp\u003eThis is the natural gas valve for Hayward's Universal H-Series Low NOx FD heaters. It fits every size in the line, H150FD, H200FD, H250FD, H300FD, H350FD and H400FD, across the pool, spa and hot tub versions and the ASME models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number history\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward has superseded FDXLGSV0001 with FDXLGSV0003. If your parts list or the tag on your old valve shows FDXLGSV0001, this is the current replacement; FDXLGSV0003 is what ships.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNatural gas only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGas valves are fuel specific. If your heater runs on propane, order the FD Series LP gas valve instead. Converting a heater from one fuel to the other is a separate job that uses the burner orifice kit or the conversion kit, not just a valve.\u003c\/p\u003e\u003cp\u003eGas valve replacement should be done by a qualified technician, with the gas supply shut off and the connection leak checked before the heater goes back into service.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624833233108,"sku":"HAY-151-0032","price":418.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1bcb11ba-3351-4ee4-8d7b-c7ed2990d65e.png?v=1788643297"},{"product_id":"pentair-mastertemp-125-manifold-kit-474972","title":"Pentair MasterTemp 125 Manifold Kit, 474972","description":"\u003cp\u003eThe Pentair 474972 is the manifold kit for the MasterTemp 125 pool and spa heater. It brings together the parts on the water side of the heater that wear or leak: the coil and tubesheet sealing o-ring kit, the bottom plate, the baffle plate, the bypass valve, the water pressure switch, a 5\/16 in. stainless steel washer and the hex cap screw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOpening the manifold on a MasterTemp is most of the labor, whichever part failed. A weep at the tubesheet means new o-rings, a heater that short cycles or will not fire may be the pressure switch, and a sticking bypass valve throws off water flow through the exchanger. Having all of them in the box means the manifold goes back together once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit fits the MasterTemp 125 only; the 175 through 400 models use a different manifold. Check the rating plate on your heater and match the model before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624870326484,"sku":"PUR-151-5066","price":283.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_60d042a9-cfcf-4ff6-80f7-a500297015f9.jpg?v=1788647620"},{"product_id":"raypak-017960f-protek-shield-module-assembly","title":"Raypak Genuine OEM Protek Shield Module Assembly, 017960F","description":"\u003cp\u003eThe Raypak 017960F is the replacement Protek Shield module for Raypak pool heaters. It is the genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePool water attacks metal, and salt pools attack it faster. The Protek Shield is sacrificial: it erodes over the season so the heater does not. Seeing the shield worn down when you pull it is the sign it has been protecting the heat exchanger and other wetted parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplace it every year\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak recommends annual replacement. The module is compact and swaps out in a few minutes, so it belongs on the same spring checklist as cleaning the filter. It is designed for both chlorinated and saltwater pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the replacement module for heaters that already have the Protek Shield installed. If your heater does not have one yet, you need the adapter retrofit kit instead.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624870818004,"sku":"RAY-151-0163","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_04cf4737-145b-4553-8fa9-590a5385635f.jpg?v=1788647653"},{"product_id":"raypak-010392f-burner-tray-with-burners-for-model-266a-pool-heater","title":"Raypak Burner Tray with Burners for Model 266A Pool Heater, 010392F","description":"\u003cp\u003eThe Raypak 010392F is the complete burner tray for the model 266A pool and spa heater, with the burners already mounted in the tray. It is the genuine Raypak part, so it fits the 266A combustion chamber and gas manifold the way the original did.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is time\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBurners live in a hot, damp space and slowly rust, warp and clog. The symptoms are a yellow or ragged flame, soot building up on the heat exchanger fins, rough ignition and a heater that runs long without getting the water to temperature. Replacing the whole tray puts a fresh set of burners in at once rather than chasing them one by one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePropane heaters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf your 266A runs on LP gas, you will also need the correct orifice, Raypak part 350083F. It is not included with the tray, so order it at the same time.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624871407828,"sku":"RAY-151-9826","price":502.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_721121a2-89c0-4f48-9929-c32348853266.jpg?v=1788647682"},{"product_id":"206-407-inlet-outlet-header-complete-protek-shield","title":"Raypak Inlet\/Outlet Header Complete with ProTek Shield, 017959F","description":"\u003cp\u003eThe Raypak 017959F is the complete inlet\/outlet header for the polymer header Raypak pool and spa heaters, supplied with the ProTek Shield already in place. It is the genuine Raypak assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich heaters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the atmospheric 206A, 266A, 336A and 406A and the low NOx 207A, 267A, 337A and 407A, all with the polymer heat exchanger header, on units manufactured from October 2019 onward. Older heaters used a different header, so check the manufacture date on the rating plate before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe header is the water connection on the heat exchanger, where the pool plumbing enters and leaves the heater. Replace it if it is cracked, leaking at the unions or damaged by freezing or chemical attack. Use a new o-ring gasket at the exchanger, and lubricate it before assembly.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624871833812,"sku":"RAY-151-1460","price":430.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_90215086-c60f-42d8-ad47-05f082b353ea.jpg?v=1788647712"},{"product_id":"heat-exchanger-assembly-h250fd","title":"Hayward Heat Exchanger Assembly for H250FD, FDXLHXA1250","description":"\u003cp\u003eThe Hayward FDXLHXA1250 is the genuine heat exchanger assembly for the H250FD, the 250 size in the Universal H-Series low NOx line of pool and spa heaters. It is the part that carries pool water across the burner heat, and it is the one you replace when the exchanger has failed from scale, chemistry damage or a freeze.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe complete exchanger assembly from Hayward, with 2 in. x 2 1\/2 in. CPVC union plumbing connections. Because it is the OEM assembly it matches the H250FD without adapting anything. It meets low NOx emission standards for clean air compliance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck that your heater is an H250FD. The other Universal H-Series FD sizes have their own exchanger part numbers. The assembly weighs 48.5 lb, so plan for the lift when you set it into the heater. Gasket kits and the header o-ring kit for the FD series are sold separately.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624873046228,"sku":"HAY-151-0005","price":1207.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4fc97949-785e-45a1-a0e5-567e669eeb7d.jpg?v=1788647873"},{"product_id":"heat-exchanger-assembly-h300fd","title":"Hayward Heat Exchanger Assembly, H300FD, FDXLHXA1300","description":"\u003cp\u003eThe Hayward FDXLHXA1300 is the genuine heat exchanger assembly for the Universal H-Series Low NOx H300FD pool heater. It is an exact replacement for the original, built to the same standard, and fits the H300FD without modification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is the fix\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater inside the cabinet, rust streaking below the exchanger, or a heater that fires but has lost its heating performance all point to the exchanger. Replacing the assembly restores the heater rather than replacing the whole unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore it goes in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe part is specific to the H300FD; other H-Series FD sizes use their own exchanger. And if the old exchanger failed early, check water chemistry before installing the new one. Low pH and high chlorine are what shorten an exchanger's life.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624873799892,"sku":"HAY-151-0006","price":1345.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a7f58080-4e4f-4997-b0fd-f71b68ca8db9.jpg?v=1788647971"},{"product_id":"hayward-smx24024864-318-inch-heat-exchanger-replacement-for-hayward-pool-pumps","title":"Hayward Heat Exchanger Replacement for Heat Pumps, SMX24024864","description":"\u003cp\u003eThis is the genuine Hayward replacement heat exchanger, part number SMX24024864, for the HP21404T pool heat pump. The heat exchanger is the component where pool water absorbs heat from the refrigerant, and it is the part most affected by water chemistry over the life of the unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the model on your heat pump data plate to HP21404T. Because the exchanger is part of the sealed refrigerant circuit, replacement involves recovering and recharging refrigerant and should be done by a licensed technician. Confirm the diagnosis with them before buying, since a heating fault can also come from the compressor, the reversing valve or a control fault.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624874455252,"sku":"HAY-151-5012","price":2115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/Smx24024864_hayward_heatexchanger.jpg?v=1788648045"},{"product_id":"kit-pc-3-wire-board-controller-iid-for-206a-408-pool-heaters","title":"Raypak Kit-PC 3-Wire Board Controller IID for 206A-408 Pool Heaters, 100-10000345","description":"\u003cp\u003eThe Raypak 100-10000345 is the Kit-PC 3-wire board controller for 206A through 408 Raypak pool heaters with intermittent ignition (IID). It is the genuine Raypak part, supplied as a service kit for field replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich heaters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak pool heaters from the 206A up to the 408 that use the 3-wire IID wiring. Raypak has used more than one board across this series, so compare the part number on your existing board and confirm the 3-wire IID configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine Raypak\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA factory board classified by Raypak as a pool heater part, built for these heaters rather than a generic replacement.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624879337684,"sku":"RAY-151-0058","price":324.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_086440a2-6ec9-4256-9ab2-26f3e5fd2cf5.jpg?v=1788648701"},{"product_id":"heat-exchanger-assembly-h350fd","title":"Hayward Heat Exchanger Assembly, H350FD, FDXLHXA1350","description":"\u003cp\u003eThe Hayward Heat Exchanger Assembly, H350FD, FDXLHXA1350 is the complete heat exchanger assembly for the Hayward Universal H-Series Low NOx H350FD pool heater. It is a Brand OEM Hayward part, and the heat exchanger is the component where burner heat moves into the pool water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFDXLHXA1350 is specific to the H350FD. Other sizes in the H-Series use their own heat exchanger part numbers, so an H300FD or an H400FD needs a different assembly. Read the model on the heater's rating plate and confirm it says H350FD before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly is a large, heavy component at about 42.6 lb, so plan for lifting help when it is time to handle it. Replacing a heat exchanger is gas appliance work, and a qualified heater technician should confirm the diagnosis and make the swap. The UPC is 610377073745.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624879698132,"sku":"HAY-151-0007","price":1496.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e82c41d0-e24b-466a-8378-16a6ac9bfb64.jpg?v=1788648764"},{"product_id":"burner-tray-with-burners-for-model-206a-pool-heater","title":"Raypak Burner Tray with Burners for Model 206A Pool Heater, 010391F","description":"\u003cp\u003eThe Raypak 010391F is the burner tray for the model 206A pool heater, supplied as a kit with the burners already in place. It is the genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the tray gets replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBurner trays live in a hot, damp environment and eventually rust, and once several burners are corroded the flame no longer runs evenly across the heat exchanger. Replacing the tray and burners as one assembly is quicker than rebuilding it piece by piece and restores an even flame pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the rating plate to confirm the heater is a 206A. Raypak part 010391F, UPC 840891028451.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624879993044,"sku":"RAY-151-9825","price":330.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0549a9f-57f9-41ce-82f8-27d270991a80.png?v=1788648818"},{"product_id":"igniter-w-gasket-kit","title":"Sta-Rite Max-E-Therm Igniter with Gasket Kit, 77707-0054","description":"\u003cp\u003eThe Sta-Rite 77707-0054 is the replacement igniter for Max-E-Therm SR-200, SR-333 and SR-400 pool heaters, supplied as a kit with the igniter gasket. It is a new, genuine Sta-Rite part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen an igniter cracks or burns out, the heater runs through its start sequence but never lights. Fitting a new igniter and gasket together restores ignition and renews the seal in the same job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIgniter elements are brittle and should not be touched by hand. Switch off power to the heater before starting, and if the bracket that holds the igniter is damaged it is available as a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your heater is a Max-E-Therm SR-200, SR-333 or SR-400. The part is also catalogued with Pentair MasterTemp burner system parts; check the igniter part number on your parts list if you have a MasterTemp.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624880091348,"sku":"STA-151-6259","price":93.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e960027d-93c5-4819-b7fc-d8452832df88.jpg?v=1788648830"},{"product_id":"complete-control-bezel-for-206a-266a-336a-and-406a-digital-heaters","title":"Raypak Complete Control Bezel for 206A, 266A, 336A and 406A Digital Heaters, 013491F","description":"\u003cp\u003eThe Raypak 013491F is the complete control bezel for Raypak digital pool and spa heaters. It is the housing that frames the digital display and buttons on the front of the heater, and it is a genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e206A, 266A, 336A, 406A and 408A digital heaters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYears of sun and weather crack and fade the bezel before anything else on the heater shows age, and a broken bezel lets water reach the control behind it. This part restores the housing. The control board and display are not included and move over from the old bezel.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624881270996,"sku":"RAY-151-9297","price":170.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3a26f885-15b6-4eff-942d-0914e00d747a.jpg?v=1788649309"},{"product_id":"raypak-018155f-water-unions-and-o-ring-for-crosswind-pool-heaters","title":"Raypak Water Unions and O-Ring for Crosswind Pool Heaters, 018155F","description":"\u003cp\u003eThe Raypak 018155F is the water union and o-ring pack for Crosswind pool and spa heaters. The unions are where the heater connects to the pool plumbing, and they allow the heater to be unhooked for service without cutting pipe. It is a genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCrosswind models I-30, I-40, I-50, I-65, O-40, O-50 and O-65. The Crosswind is an inverter driven heater that adjusts its output to hold the pool temperature, and these are the standard water connections for the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA drip at the heater connection that a snug turn does not stop usually means the o-ring has flattened. If the union nut is cracked or its threads are worn, the union itself needs to go too. This pack covers both.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624881500372,"sku":"RAY-151-7690","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5b0cb4ea-283f-47e2-b0d4-ee8a3f8f5c1f.png?v=1788649333"},{"product_id":"copper-tube-bundle-266-267","title":"Raypak Genuine OEM Copper Tube Bundle 266\/267, 010060F","description":"\u003cp\u003eThe Raypak 010060F is the genuine copper tube bundle heat exchanger for 266A and 267A digital pool heaters built with polymer headers. It is the core of the heater: pool water passes through the copper tubes while the burners heat them from below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bundle ships with its baffle, the flange nut kits and two o-ring gaskets, so the exchanger can be swapped without a separate hardware order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck two things: that the heater is a 266A or 267A, and that it has polymer headers. This bundle is specific to the polymer header design.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624882909396,"sku":"RAY-151-1464","price":694.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8be76acd-7434-4a5e-89b8-cb35147910a3.jpg?v=1788649444"},{"product_id":"copper-tube-bundle-r206a-r207a","title":"Raypak Copper Tube Bundle R206A, R207A, 010059F","description":"\u003cp\u003eThe Raypak 010059F is the genuine replacement copper tube bundle for residential 206A and 207A digital heaters built with polymer, or plastic, headers. It is the heat exchanger core of the heater: pool water passes through the copper tubes while the burner tray heats them from below. The kit includes the baffle, a flange nut kit and two o-ring gaskets so the exchanger goes back together in one job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResidential and commercial bundles are not the same part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis bundle fits residential heaters only. Residential model numbers start with P-R for Raypak, P-M for Rheem and P-D for Ruud. Commercial heaters start with C-R and use metal ASME headers, and their tube bundle is part 010055F, which will not fit here. Before ordering, open the front cabinet door and read the full model number off the identification plate. The serial number on the same plate gives the build date, with the year in the first two digits and the month in the next two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCopper or cupro nickel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you want more resistance to aggressive water, Raypak part 010364F is the cupro nickel version of this bundle. It interchanges directly with 010059F on the same heaters.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624883368148,"sku":"RAY-151-1463","price":663.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0eb79f9f-e084-4e91-a9fa-b446ebda9016.jpg?v=1788649479"},{"product_id":"r0457502-igniter-kit-jxi-jandy-pro-series","title":"Jandy Igniter Kit for JXi Heater Models 200\/260\/400, R0457502","description":"\u003cp\u003eThe Jandy R0457502 is the genuine replacement igniter kit for JXi pool heaters in the 200, 260 and 400 sizes, including the JXi Jandy Pro Series. The igniter is the component that lights the burner on each call for heat, and it is one of the parts most often replaced on a gas heater as it ages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA heater that runs its blower on a call for heat but never lights, then locks out on an ignition fault, often has a failed igniter. A visible crack in the element confirms it. Fitting the R0457502 kit restores normal ignition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your heater is a JXi 200, 260 or 400 before ordering. This kit is specific to that line.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624883728596,"sku":"LAR-151-3220","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1614d399-2efa-49cd-b7ab-ceff4a7b0374.png?v=1788649543"},{"product_id":"h-series-control-bezel-assembly-ed2","title":"Hayward H-Series Control Bezel Assembly ED2, HAXCPA1932","description":"\u003cp\u003eThe Hayward HAXCPA1932 is the control bezel assembly for H-Series ED2 style electronic gas heaters in the 150 through 400 sizes. Hayward lists it as Control Bezel Assy, ED2, and it is the Brand OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bezel is specific to the ED2 generation of the H-Series. Hayward lists separate bezel and keypad assemblies for its Universal H-Series FD heaters, such as FDXLBKP1930, and separate ED2 control panel assemblies by heater size, so match the style before ordering. Read the model number and label on your heater and compare it with the ED2 designation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe control bezel supplied as an assembly rather than a bare trim piece. The control panel and control board assemblies for each ED2 size are separate Hayward part numbers, so this listing covers the bezel only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTurn the gas, power and pump off before you work on the front panel. If the display or the keypad no longer responds, confirm whether the bezel is the failed part before replacing it.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624884351188,"sku":"HAY-151-1226","price":692.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d9014af9-dacd-4635-894f-bb18fed0c922.jpg?v=1788649615"},{"product_id":"raypak-014931f-266a-polymer-cu-ni-tube-bundle","title":"Raypak 266A Polymer Cu-Ni Tube Bundle, 014931F","description":"\u003cp\u003eThe Raypak 014931F is the cupronickel tube bundle for the 266A pool and spa heater with polymer headers, the set of tubes that carries pool water through the heat exchanger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is listed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak lists 014931F in its parts list for the 206A through 406A heaters, under the polymer heat exchanger, as the cupronickel tube bundle for the 266A on units built from July 2013. The other sizes have their own numbers: 014930F for the 206A, 014932F for the 336A and 014933F for the 406A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCopper or cupronickel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak states that copper and cupronickel heat exchangers and tube bundles are not interchangeable. Heaters with the suffix C use copper parts, listed for the 266A as 010060F, and heaters with the suffix X use cupronickel parts such as this one. The model name on the rating plate, for example 266A-EN-X, shows which you have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen the bundle fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak warns that the water conditions that caused a tube bundle to fail have very likely also damaged the bypass valve and the Unitherm Governor. It recommends replacing the Unitherm Governor, 006719F, and inspecting the bypass assembly when the bundle is changed. The header O-ring gasket, 006713F, the flange nut kit, 008259F, and the cupronickel baffle, 014935F, are listed as separate parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the model, the X suffix and the polymer headers. Bronze header ASME models have their own tube bundles.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624884383956,"sku":"RAY-151-8802","price":1369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d51c448f-f1d4-4d6e-a447-abb22f083649.jpg?v=1788649619"},{"product_id":"pentair-mastertemp-461031-heater-direct-air-intake-duct-kit","title":"Pentair MasterTemp Heater Direct Air Intake Duct Kit, 461031","description":"\u003cp\u003eThe Pentair 461031 Direct Air Intake Duct Kit is the combustion air intake for a MasterTemp heater installed indoors. Rather than letting the heater breathe the air in the equipment room, the kit ducts outside air straight to the burner through a 3 in. PVC pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVertical or horizontal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 3 in. intake can be run vertically through a roof or horizontally through a wall, so it fits most equipment room layouts. It is PVC pipe on the intake side, not metal flue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does not cover\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is for the air going in. The exhaust vent and the appliance adapter that connects the heater to its flue are separate parts, so plan the exhaust run alongside this kit when you lay out an indoor install.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624885432532,"sku":"PUR-151-1031","price":245.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0ebd462b-6053-4400-bdf2-fab348763ae2.jpg?v=1788649851"},{"product_id":"hayward-fdxlter1931-thermistor","title":"Hayward HDF400 Thermistor, FDXLTER1931","description":"\u003cp\u003eThe Hayward FDXLTER1931 is the thermistor, the water temperature sensor, for the Hayward HDF400 gas heater. It is item 10 on the Hayward HDF400 service parts sheet, and it is the Brand OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward's H-Series FD manual explains that the thermistor monitors the return water temperature so the heater can hold the selected pool or spa temperature, and it shuts the heater off as the return water reaches 104 F. When it drifts or fails open, the display shows the wrong temperature or the heater reports a sensor fault and refuses to run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn Hayward H-Series FD heaters the thermistor screws into the inlet side of the header, and its connector plugs into the ignition control board. Hayward's procedure is to turn the pump, gas and power off, drain the heat exchanger, and use new sealant on the thermistor threads when you refit it. Have a qualified technician do the work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward uses more than one thermistor across its heater lines, and FDXLTER1930 is a separate listing for FD heaters. Confirm your heater calls for FDXLTER1931 before ordering.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624886055124,"sku":"HAY-151-0119","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ac624729-87bf-4cb7-95a5-746ba4db55dd.jpg?v=1788649881"},{"product_id":"pentair-control-board-kit-461105","title":"Pentair Genuine OEM MasterTemp\/Max-E-Therm 6-Button Control Board Kit, 461105Z","description":"\u003cp\u003eThe Pentair 461105Z is the six button control board kit for MasterTemp and Sta-Rite Max-E-Therm gas heaters. It is the factory part, the same board Pentair fits on the production line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMasterTemp and Max-E-Therm heaters share this control system. On the Max-E-Therm side it covers the SR200, SR333 and SR400, where it is listed in the electrical system parts breakdown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoard or pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the heater ignores button presses but the display and firing logic are otherwise normal, check the six button membrane pad first, since it is a separate part. If the display, temperature control or diagnostics are acting up, the board is the more likely cause.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624917938388,"sku":"PUR-151-0974","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cc0b28f3-0582-4ad3-955f-d07534fc3e18.jpg?v=1788653288"},{"product_id":"heat-exchanger-assembly-h400fd","title":"Hayward Heat Exchanger Assembly for H400FD, FDXLHXA1400","description":"\u003cp\u003eThe Hayward FDXLHXA1400 is the heat exchanger assembly for the H400FD Universal H-Series Low NOx pool and spa heater. It is the genuine Hayward replacement, supplied as a complete assembly so it drops in where the original came out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe heat exchanger is the heart of a gas heater. Pool water passes through it while the burner heats it from below, and everything the heater does depends on that transfer working. When an exchanger scales up, corrodes or starts to leak, the symptoms show up as poor heating, water in the cabinet or tripped safeties, and the fix is a new assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis assembly is specific to the H400FD. The other sizes in the Universal H-Series, H150FD through H350FD, use their own exchangers, so confirm the model on your heater's rating plate before ordering. If the plate reads H400FD, this is the part.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624921903316,"sku":"HAY-151-0008","price":1605.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4bad3fd3-bd3d-4818-afcf-9bc81f0fbccd.jpg?v=1788653584"},{"product_id":"h-series-bezel-keypad-assembly","title":"Hayward H-Series Bezel \u0026 Keypad Assembly, FDXLBKP1930","description":"\u003cp\u003eThe Hayward FDXLBKP1930 is the bezel and keypad assembly for the Universal H-Series Low NOx heaters, and it fits every size in the line: H150FD, H200FD, H250FD, H300FD, H350FD and H400FD. It is the genuine Hayward part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe keypad is the only way to talk to an H-Series heater. Temperature, mode and every status reading go through this pad and the window in the bezel around it. Years of sun and weather stiffen the buttons until they need a hard press, then stop responding altogether, and a cracked bezel lets water in behind the pad. Because the two come as one assembly, either problem is fixed with a single part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny Hayward heater whose model ends in FD takes this assembly. Check the rating plate behind the access panel, and if it reads one of the six FD models, this is the keypad.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624922263764,"sku":"HAY-151-0015","price":122.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_88205d76-16a8-4949-8c20-b38627ba09ad.jpg?v=1788653610"},{"product_id":"raypak-burner-tray-with-burners-pro-sea-level","title":"Raypak Burner Tray with LP Burners Pro (Sea Level) for Heat Exchanger Models 399 and 406A, 019209F","description":"\u003cp\u003eThe Raypak 019209F is the complete burner tray with propane burners for Raypak gas fired pool and spa heaters built on the 399 and 406A heat exchangers. It covers both the bronze ASME and the polymer atmospheric versions of those models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the gas and the altitude\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis tray is the LP (propane) version set up for sea level. Natural gas heaters and high altitude installations each take their own tray, so check the heater rating plate for gas type and confirm the elevation before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tray arrives with the burners fitted, ready to go into the heater, which makes it the straightforward fix when a burner tray has rusted through or the burners are too far gone to clean.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624924590292,"sku":"RAY-151-1953","price":321.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_473cdbc9-4829-48de-94ad-dd31528461d6.png?v=1788653731"},{"product_id":"pentair-474059-tube-sheet-coil-assembly-kit-for-250na-250lp-mastertemp-heater","title":"Pentair Tube Sheet Coil Assembly Kit for 250NA 250LP MasterTemp Heater, 474059","description":"\u003cp\u003ePentair 474059 is the tube sheet coil assembly kit for the MasterTemp 250NA and 250LP heaters. It is a genuine Pentair part, and it fits heaters manufactured after 1\/12\/09, the new tub design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEverything for the exchanger swap\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBeyond the coil assembly itself the kit carries 8 coil o-rings, 8 tube sheet seals, a metal tube replacement o-ring, a blower\/adapter plate gasket and a tube of high temp RTV silicone, so the heater goes back together sealed without a second parts order. A manifold bypass valve package, a Koala wool insulation service kit and a sheet metal warning label are also included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIgnitor included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn ignitor and gasket kit rounds out the package, which makes sense on a job where the burner side is already open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the heater is a 250NA or 250LP and that its manufacture date is after 1\/12\/09. Earlier heaters use a different tub and are not covered by this kit.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624926687444,"sku":"PUR-151-4059","price":929.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f408ccf4-1e7f-4cbd-ad4f-9abbd4b5c36f.png?v=1788654693"},{"product_id":"burner-tray-w-burners-for-406a-pool-heater","title":"Raypak Burner Tray with Burners for 406A Pool Heaters, 010394F","description":"\u003cp\u003eThe Raypak 010394F is the natural gas burner tray with burners for the Raypak 406A pool and spa heater, listed by Raypak for heaters with a copper or an ASME heat exchanger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich 406A it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak builds the 406A with a copper heat exchanger (suffix C), a cupronickel heat exchanger (suffix X) and as an ASME model. In its parts list, 010394F is the natural gas tray for the copper and ASME heaters, set up for number 50 orifices. Cupronickel heaters use a different tray, 019213F, and propane heaters use their own trays too. The suffix is part of the model name on the rating plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhole assembly swap\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOrdering the tray with its burners means the whole burner assembly is replaced in one step instead of moving burners one at a time into an old tray. Raypak lists the 406A spacer and hold-down kit (010418F), the burner (100-10009120) and the orifices as separate parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the heater is a 406A, the gas, and the C, X or ASME designation from the rating plate. Raypak directs service on its gas heaters to a qualified installer, service agency or the gas supplier.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624926851284,"sku":"RAY-151-1563","price":775.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e9bc2c0e-abaf-4b90-adbe-3a3c51b92f59.jpg?v=1788654721"},{"product_id":"propane-natural-gas-pilot","title":"Raypak Genuine OEM Propane and Natural Gas Pilot, 002003F","description":"\u003cp\u003eThe Raypak 002003F is the genuine pilot for Raypak propane and natural gas pool heaters with intermittent ignition. One part covers both fuels, which saves sorting out which version you have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak lists the 002003F for the 53A, 53B, 055A and 055B IID heaters. It is also catalogued for the Versa 55A and 55B, the Versa 155A, 155B and 155C, and the RP2100 R185A through R405A heaters manufactured from 1993 to 1998. Check the model on your rating plate and compare the old pilot before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pilot that has burned back or fouled is one of the usual reasons an IID heater sparks without lighting, or lights and drops out a moment later. Swapping the pilot is a routine repair, and using the OEM part keeps the flame shape and sensing the control expects.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624927539412,"sku":"RAY-151-3523","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c215f180-0055-4522-ae53-c497ad24bc15.jpg?v=1788654768"},{"product_id":"raypak-h000329-100k-temp-sensor-kit-9350-9353-5450-8450","title":"Raypak 100K Temp Sensor Kit, 9350\/9353 and 5450-8450 Heat Pumps, H000329","description":"\u003cp\u003eThe Raypak H000329 is the 100K temperature sensor kit for the Raypak 9350, 9353, 5450, 6450 and 8450 heat pump pool heaters. It is the genuine Raypak part, supplied as a kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering the right sensor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese heat pumps use more than one sensor, and Raypak sells the ambient sensor kit and the coil sensor (H000334) separately. Match H000329 against your parts list or the old sensor before ordering. A sensor is usually the culprit when the display shows an impossible temperature, throws a sensor error, or the unit cannot settle on its set point.\u003c\/p\u003e\u003cp\u003eThe kit ships by parcel.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624927604948,"sku":"RAY-151-9552","price":108.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_91c3c648-6a76-4574-81de-126a7d8be7b3.png?v=1788654773"},{"product_id":"5-5kw-balboa-heater-assy-w-m7-sensors-studs","title":"Hydroquip 5.5 kW Balboa Heater Assembly with M7 Sensors and Studs, 26-58083-K","description":"\u003cp\u003eThe Hydroquip 5.5 kW Balboa Heater Assembly with M7 Sensors and Studs, 26-58083-K, is a 5.5 kW Balboa heater assembly supplied with the M7 sensors and terminal studs fitted. It is meant for Balboa based spa control packs that use the M7 sensor arrangement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the M7 temperature and high limit sensors and the studs come with it, this is a complete swap rather than a bare element, and there is no separate hardware order. The rating is 5.5 kW.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the part number 26-58083-K to your spa pack paperwork, and confirm the 5.5 kW rating matches the heater you are replacing. Hydroquip also lists other Balboa 5.5 kW M7 dual sensor assemblies under different part numbers, so do not swap one for another without checking the number against your pack.\u003c\/p\u003e","brand":"Hydro-Quip","offers":[{"title":"Default Title","offer_id":48624927703252,"sku":"HQP-851-0040","price":152.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/26-58083-k-55kw-balboa-heater-assy-w-m7-sensors-studs.jpg?v=1788654787"},{"product_id":"heat-exchanger-assembly-h150fd","title":"Hayward Heat Exchanger Assembly for H150FD, FDXLHXA1150","description":"\u003cp\u003eThe Hayward FDXLHXA1150 is the replacement heat exchanger assembly for the Universal H-Series Low NOx H150FD heater. It is the genuine Hayward part, supplied as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch it to your heater\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Universal H-Series Low NOx line runs from the H150FD up to the H400FD, and each size has its own exchanger. This one is for the H150FD. Check the model on the rating plate before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is time\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe heat exchanger is where pool water takes heat from the burner, and it is the part that suffers most from poor water balance. Leaks from the cabinet, scale or corrosion at the header, or a heater that fires but no longer heats are the usual signs. If the inlet and outlet unions have hardened or cracked, Hayward sells a union connector kit separately so the whole water side can be renewed at once.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624928194772,"sku":"HAY-151-0003","price":1272.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_37996bb6-676c-457c-8608-82acba1263d7.jpg?v=1788654837"},{"product_id":"pentair-474061-tube-sheet-coil-assembly-kit-cupro-nickel-for-model-400na-400lp-mastertemp-heater","title":"Sta-Rite Tube Sheet Coil Assembly Kit for Model 400NA, 400LP MasterTemp Heater, 474061","description":"\u003cp\u003eThe 474061 kit is the cupro nickel tube sheet coil assembly for Pentair MasterTemp 400NA and 400LP heaters manufactured after 1\/12\/09, the new tub design. It is the genuine Pentair Sta-Rite part and comes with everything the exchanger swap needs, not just the coil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tube sheet coil assembly itself, eight coil o-rings, eight tube sheet seals, a metal tube o-ring, a manifold bypass valve package, a blower and adapter plate gasket, an ignitor and gasket kit, a tube of high temp RTV silicone, a Koala wool insulation service kit and a sheet metal warning label.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe MasterTemp coil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMasterTemp and Sta-Rite Max-E-Therm exchangers are built around a generally round coil rather than the straight, flat tube bundle most heaters use. The end plate measures 5-1\/2 in. wide by 8-1\/2 in. tall, the assembly is about 13 in. side to side, and it runs about 15 in. from the plate to the far end of the coil. The photos show the coil from several angles for comparison with yours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the heater is a 400NA or 400LP built after 1\/12\/09. The 200NA\/200LP and 250NA\/250LP heaters take their own kits.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624928260308,"sku":"STA-151-4061","price":1253.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/474061.jpg?v=1788654846"},{"product_id":"pentair-474957-combustion-chamber-assembly-for-max-e-therm-heater","title":"Pentair Combustion Chamber Assembly for Max-E-Therm Heaters, 474957","description":"\u003cp\u003eThe Pentair 474957 is the combustion chamber assembly for the Sta-Rite Max-E-Therm gas heaters, covering the SR200, SR333 and SR400. It is the genuine part, supplied as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe combustion chamber is part of the Max-E-Therm burner system, the same group of parts as the flameholder, the insulation kit and the gas valve. Those are separate part numbers, so if the chamber has failed it is worth inspecting the rest of the burner system while the heater is apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the heater is a Max-E-Therm SR200, SR333 or SR400. Burner and combustion work on a gas appliance belongs with a qualified technician: shut off the gas, make the repair, and verify combustion before the heater goes back into service.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624928850132,"sku":"PUR-151-7042","price":373.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/Pentair_474957.jpg?v=1788654917"},{"product_id":"copper-tube-bundle-for-model-156a-pool-heater","title":"Raypak Copper Tube Bundle for Model 156A Pool Heater, 014875F","description":"\u003cp\u003eThe Raypak 014875F is the genuine copper tube bundle for the Raypak model 156A pool heater. The tube bundle is the heat exchanger at the heart of the heater: pool water runs through the copper tubes while the burners heat them from below, and everything the heater does depends on that exchange working cleanly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eScale from hard or poorly balanced water, corrosion from low pH or high chlorine, and freeze damage all attack the tubes over time. The symptoms are a heater that short cycles or trips on high limit, falling heat output, or water dripping from the exchanger into the burner tray. Once a tube is leaking, replacing the bundle as a complete assembly is the practical repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis bundle is specific to the 156A. Raypak makes a different bundle for each heater size, so confirm the model number on your heater's rating plate. While the heater is apart, it is a good time to check the headers and gaskets that seal against the bundle and replace anything worn.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624930554068,"sku":"RAY-151-1907","price":445.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2b9a3df9-a5ef-4588-b08b-28807e705cab.jpg?v=1788655098"},{"product_id":"heat-exchanger-assembly-h200fd","title":"Hayward Heat Exchanger Assembly, H200FD, FDXLHXA1200","description":"\u003cp\u003eThe Hayward FDXLHXA1200 is the genuine replacement heat exchanger assembly for the Universal H-Series Low NOx pool and spa heater, model H200FD. The exchanger is where the heater does its work: pool water passes through it while the burners heat it from below, and the assembly is supplied complete and ready to set into the heater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePoor water chemistry, especially low pH and high sanitizer levels, attacks the exchanger from the inside, and scale from hard water coats it. The signs are water in the burner tray or under the heater, rust staining below the exchanger, and a heater that short cycles on high limit or will not reach set temperature. Once it leaks, the exchanger assembly is the repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part is specific to the H200FD. The H150FD, H250FD, H300FD, H350FD and H400FD each use their own exchanger, so check the model on the heater's rating plate. Correct the water chemistry that damaged the old exchanger before running the new one.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624934256852,"sku":"HAY-151-0004","price":1266.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_744e61b2-fa36-4bf3-aa7e-b40a796dfd30.jpg?v=1788655168"},{"product_id":"control-bezel-w-switch-decal","title":"Raypak Genuine OEM Control Bezel with Switch Decal, 009491F","description":"\u003cp\u003eThe Raypak 009491F is the control bezel with switch decal membrane for R185B, R265B, R335B and R405B IID digital pool heaters. It is the genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bezel comes with the switch decal membrane, the button face that sits over the control. Sun and pool chemicals fade and crack these over the years until the labels are unreadable and the buttons stop responding cleanly; replacing bezel and membrane together fixes both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your heater is one of the four models listed. The bezel cover and the control board are separate Raypak parts.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624938189012,"sku":"RAY-151-9491","price":172.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8e736631-f8bf-48ec-a487-4cb482a979d5.jpg?v=1788655775"},{"product_id":"boiler-burner-kit","title":"Raypak Boiler Burner 10-Pack, 100-10000414","description":"\u003cp\u003eThe Raypak 100-10000414 is a kit of ten replacement boiler burners for select Raypak heaters. It is the genuine Raypak part and the current replacement for burner model 301210, so it covers heaters whose parts lists still show the older number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace burners\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBurners that have rusted through, warped from heat or clogged with debris no longer spread the flame evenly across the tray. The result is a heater that lights poorly, soots up or shuts down on safety. A fresh set of burners brings the flame pattern back to even and helps the heater reach its full service life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your heater model and serial number against the Raypak parts list to be sure this burner applies. The burners are made for straightforward installation into the existing tray.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624938451156,"sku":"RAY-151-1123","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_75fedc2f-22bb-4fae-a1aa-c2c4972076fc.png?v=1788655809"},{"product_id":"raypak-406a-burner-tray-without-burner-010398f","title":"Raypak 406A Burner Tray Without Burner 010398F","description":"\u003cp\u003eThe Raypak 010398F is the burner tray for the Raypak 406A pool and spa heater, supplied without burners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the tray does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe burners sit on a burner tray assembly that also carries the pilot. Raypak describes taking the tray out as a short job: disconnect the gas line and the gas valve wiring, remove the two screws that mount the tray and the two that secure the gas valve to the jacket, then slide the assembly out. The steps are reversed to install the new one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBurners and related parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the tray only. Raypak lists the 406A burner (100-10009120), the burner spacer and hold-down kit (010418F) and the natural gas orifices as separate parts, with the orifice size set by the gas and the elevation on the rating plate. Raypak also notes that on a badly sooted heat exchanger the hold-down bracket and spacer can be distorted by direct flame and need replacing too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the heater is a 406A from the rating plate. Raypak directs service on its gas heaters to a qualified installer, service agency or the gas supplier.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624938877140,"sku":"RAY-151-8788","price":582.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a8723c18-e967-4a5e-b768-2b27a296ea18.png?v=1788655884"},{"product_id":"jandy-r0589600-access-door-kit-for-jxi-heaters","title":"Jandy Access Door Kit for JXi Heaters, R0589600","description":"\u003cp\u003eThe Jandy R0589600 is the access door kit for Jandy JXi gas-fired pool and spa heaters in the 200, 260 and 400 sizes, supplied with the door, an O-ring seal and screws. It is item 28 in Jandy's JXi parts list, and one kit number covers all three heater sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJandy's parts table describes R0589600 as an access door kit made up of a door, an O-ring seal and screws. Because the seal is part of the kit, the door goes back on with a fresh O-ring instead of the worn one that came off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe part is listed for the JXi 200, 260 and 400. This listing is for the JXi series only, so check the parts list in your heater manual against the model number on the heater before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated JXi service parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same Jandy parts table lists the R0589700 thermal regulator valve, the R0589800 bypass kit, the R0446000 drain plug and the R0589500 gasket and seals kit for the heater manifold. Jandy publishes spare parts installation instructions for the JXi (document H0439300). They begin with switching off electrical power and the main gas supply and draining the heater, and the work should be done by a qualified pool equipment professional.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624956899540,"sku":"LAR-151-3255","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d4aaf2eb-1c83-42a5-86c1-96c4ca3de576.jpg?v=1788656060"},{"product_id":"zodiac-r0589700-thermal-regulator-valve-for-model-200-260-400-jxitm-heaters","title":"Jandy Thermal Regulator Valve for Model 200, 260, 400 JXi Heaters, R0589700","description":"\u003cp\u003eThe Jandy R0589700 is the thermal regulator valve for the JXi pool and spa heaters in the 200, 260 and 400 sizes. It is the genuine Jandy part, also listed under the Zodiac name with the same number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe thermal regulator lives in the heater header and governs how much water flows through the heat exchanger. By holding flow back until the exchanger is warm it lets the heater reach its working temperature quickly and keeps it there, which is what protects the exchanger over the long run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your heater is a JXi 200, 260 or 400 and that R0589700 is the regulator called out in its parts list.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624957325524,"sku":"LAR-151-3233","price":102.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/LAR-151-3233_1a.png?v=1788656089"},{"product_id":"temperature-sensor-kit","title":"Raypak Genuine OEM Temperature Sensor Kit, 009577F","description":"\u003cp\u003eThe Raypak 009577F is the genuine 3-wire temperature sensor kit for the 206A, 266A, 336A and 406A Low NOx IID pool heaters. It is the sensor the control board reads to know the water temperature, so when it drifts or fails the heater loses its reference: the display reads wrong, the heater overshoots or never gets to set point, or the control flags a sensor fault.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTemperature sensors are one of the cheapest parts on the heater and one of the most common causes of erratic temperature control. If the symptoms above show up and the heater otherwise fires normally, swapping the sensor is the sensible first step before chasing anything more expensive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your heater is one of the four models listed and that it uses a 3-wire sensor. This kit is the OEM Raypak part, not a generic substitute.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624958505172,"sku":"RAY-151-1208","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b134abdf-833f-4092-8689-5ba865fe7bd8.jpg?v=1788656501"},{"product_id":"jxi-user-interface-kit","title":"Jandy JXi User Interface Kit for Model 200\/260\/400, R0591900","description":"\u003cp\u003eThe Jandy R0591900 is the genuine user interface kit for the JXi pool heaters in the 200, 260 and 400 sizes. It is the control face on the front of the heater, where the temperature is set, pool or spa mode is chosen and status and fault codes are read.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA display that stays dark while the heater has power, buttons that no longer respond, or an interface that has taken on water and behaves erratically all point to the user interface. Replacing the kit is a fraction of the cost of a new heater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIsolate power to the heater before opening the control compartment, transfer the harness connections to the new interface and refit the cover. Check the model size on your data plate is 200, 260 or 400 before ordering.\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":48624959979732,"sku":"LAR-151-3247","price":246.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_81403d58-614d-4191-bf04-0de6a2b25aa3.jpg?v=1788656611"},{"product_id":"d-2-indoor-power-vent-120v-for-models-206a-408","title":"Raypak D-2 Power Vent, 120V, for 336A to 408 Heaters, 010745","description":"\u003cp\u003eThe Raypak 010745 is the D-2 power vent for Raypak 336, 337, 406, 407 and 408 pool and spa heaters, factory wired for 120 VAC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe D-2 is a fan-assisted vent that lets the heater use through-the-wall venting and reduced horizontal and vertical flue pipe in new and existing installs. It is tested and certified to ANSI Z21.56 for pool heaters and works as a Category III appliance with 4 in. positive pressure vent pipe. Category I vent material such as B-vent must not be used with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich part number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak makes four D-2 kits. Part 010745 is the 120 VAC kit for the 336\/337 and 406\/407\/408 sizes. The 120 VAC kit for the 206\/207 and 266\/267\/268 sizes is 010744, and the 240 VAC kits are 009832 and 009833.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe blower has a 120\/240 volt, 60 Hz motor rated 1.95 and 1.0 A at 3200 RPM, with a plenum, a draft proving switch and a motor relay. Raypak includes a collar adapter, a 7\/8 in. grommet, an adjustable 90 degree elbow with screen and a 4 in. flue adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the heater size on the rating plate against the part number table above. Raypak requires a qualified installer.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624960110804,"sku":"RAY-151-0745","price":769.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ab552777-f111-466c-91f8-9b4b4ae3c1cc.jpg?v=1788656623"},{"product_id":"front-header-assembly","title":"Hayward Front Header Assembly, FDXLFHA1930","description":"\u003cp\u003eThe Hayward FDXLFHA1930 is the front header assembly for the Universal H-Series Low NOx FD pool heaters, H150FD through H400FD. Hayward lists it as Header Assy, FD Heaters, and it is the Brand OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the header does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe header is the water side manifold at the plumbing end of the heat exchanger, where the pool plumbing connects. Hayward builds a bypass into the header to keep flow through the heat exchanger correct, the thermistor screws into the inlet side of it, and the high limit switches are mounted on it. It is the usual replacement when a heater leaks where the pool plumbing meets the heater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembled header, not loose pieces. The header o-ring kit is a separate part, and plan on replacing the o-rings whenever the header comes off. The union nuts are a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the model number on the heater rating label reads one of the Universal H-Series FD models. Drain the heat exchanger and turn off the gas, power and pump before removing the header.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624960340180,"sku":"HAY-151-1000","price":303.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_062c2ab4-ae73-4344-bdaf-01b2485b6a32.jpg?v=1788656663"},{"product_id":"heater-manifold-kit-250-000-btu","title":"Pentair Heater Manifold Kit 250,000 BTU, 460748","description":"\u003cp\u003eThe Pentair 460748 is the manifold kit for the Pentair MasterTemp 250 pool and spa heater, models 250NA and 250LP at 250,000 BTU. It is the Brand OEM kit for the heater's water system, where the manifold directs pool water through the heat exchanger and back out to the return line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the kit includes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair's MasterTemp water system parts sheet lists the manifold kit as including the numbered items 3 through 14 and 21 on that sheet, plus items 5 to 7 on the electrical system sheet. That covers the coil and tubesheet sealing O-ring kit, the manifold bypass valve kit, the water pressure switch, the connector tube kit and the zinc plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair sells a different manifold kit for each MasterTemp size, so 460748 is for the 250 only. The 175 and 200 models use 77707-0014, the 300 uses 77707-0015 and the 400 uses 77707-0016. Check the BTU rating on the heater data plate before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 250 sealing O-ring kit (460749, eight O-rings) and the tube sheet coil assembly kit (460747) are listed separately. Pentair also lists a basic manifold kit, 474200, that includes items 3, 5 and 10 to 14 only.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624960471252,"sku":"PUR-151-0748","price":510.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6031f12e-942a-4acd-adb4-1408736b76b2.jpg?v=1788656675"},{"product_id":"raypak-014933f-cupro-nickel-tube-bundle-for-406a-polymer-header-pool-spa-heater","title":"Raypak 406A Polymer Cu-Ni Tube Bundle, 014933F","description":"\u003cp\u003eThe Raypak 014933F is the cupro-nickel tube bundle for the 406A pool and spa heater built with polymer headers. It is the genuine Raypak part and the core of the heat exchanger, the run of finned tubes that pool water passes through while the burners heat it from below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy cupro-nickel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCupro-nickel is copper alloyed with nickel. It holds up to corrosion better than plain copper, which is the usual reason a heater needs a new bundle in the first place: low pH, high chlorine or poor water balance eating into the tubes until they scale, pit or leak. Replacing the bundle with the more resistant alloy addresses the failure rather than repeating it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak builds the 406A with either polymer or bronze ASME headers, and the two take different tube bundles. This one is for the polymer header heater. The bronze ASME 406A and 407A use Raypak 017981F. Check the header material on your heater before ordering.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624960536788,"sku":"RAY-151-8807","price":1538.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a4407173-6d88-449c-89a8-daeef49e352e.jpg?v=1788656684"},{"product_id":"heat-exchanger-cupro-nickel-tube-bundle-406a-407a","title":"Raypak Heat Exchanger Cupro Nickel Tube Bundle 406A\/407A, 017981F","description":"\u003cp\u003eThe Raypak 017981F is the cupro nickel tube bundle for 406A and 407A pool and spa heaters with bronze ASME headers. It is a genuine Raypak part and the core of the heat exchanger, the finned tube section pool water passes through as the burners heat it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to resist corrosion\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCupro nickel is copper alloyed with nickel, and the nickel is what gives it its corrosion resistance and long life. Tube bundles usually fail because water chemistry has gone after the copper, so replacing with the nickel alloy addresses the cause instead of repeating it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak builds these heaters with either bronze ASME or polymer headers, and the two use different bundles. This one is for bronze ASME headers on the 406A and 407A. The polymer header 406A takes Raypak 014933F. Check your header material first.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624964534484,"sku":"RAY-151-0181","price":1627.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a428d0e1-a385-47e5-85ae-524a583dbf62.jpg?v=1788656698"},{"product_id":"pentair-474058-tube-sheet-coil-assembly-kit-cupro-nickel-for-mt-175na-200lp","title":"Pentair Tube Sheet Coil Assembly Kit Cupro Nickel, for MasterTemp 175NA-200LP, 474058","description":"\u003cp\u003eThe Pentair 474058 is the cupro nickel tube sheet coil assembly kit for MasterTemp 175NA, 175LP, 200NA and 200LP heaters. It is the genuine Pentair heat exchanger replacement, the coil pool water runs through while the burner heats it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCupro nickel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe coil is cupro nickel, copper alloyed with nickel. It resists corrosion better than plain copper, which matters because aggressive water chemistry is what usually takes out a heat exchanger. Replacing with the nickel alloy addresses the cause.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne kit covers both the natural gas (NA) and propane (LP) versions of the MasterTemp 175 and 200. The MasterTemp 300NA and 300LP take the 474060 kit instead.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624964731092,"sku":"STA-151-4058","price":773.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dea74d18-b90a-4ab5-bf3c-d92789a2c194.jpg?v=1788656723"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/pool-heater-parts\/brand-american-granby.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}