{"title":"Pool Lift Parts","description":"\u003cp\u003eShop pool lift parts at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"aqua-creek-f-41cbj-revolution-scout-titan-linak-control-box","title":"Aqua Creek Revolution\/Scout\/Titan Linak Control Box, F-41CBJ","description":"\u003cp\u003eThe Aqua Creek F-41CBJ is the Linak control box for the Revolution, Scout and Titan pool and spa lifts. It is a two port box that runs the operation of the lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt in safeguards\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe box is portable rather than fixed to the lift, so it can be taken off and stored. It has an emergency lifting function, and an acoustic battery alarm that sounds when the battery is down to roughly 50 percent capacity, giving warning well before the lift is left without power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is separate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 24 volt battery and the Linak four button hand controller are sold on their own.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48624884777172,"sku":"ACP-42-1004","price":276.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d4a582a8-9601-4909-91e8-f94093bb5abc.jpg?v=1788649681"},{"product_id":"aqua-creek-linak-hb00-u10-4-button-hand-controller-for-pool-lift","title":"Aqua Creek Linak 4 Button Hand Controller for Pool Lift, HB00-U10","description":"\u003cp\u003eThe Aqua Creek Linak HB00-U10 is the four button hand controller used on Aqua Creek pool lifts. It puts the lift cycle in the hand of whoever is operating it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFour buttons cover up, down and side to side movement, which is the full set of motions a pool lift makes when it takes a rider from the deck out over the water and back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe controller plugs into its own brand of control box, so there is nothing to wire. It is water resistant, as a control that lives at the pool edge has to be. If the control box itself is the failed part, that is a separate item.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48625731895508,"sku":"ACP-42-1070","price":246.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4ce9c1dd-f88c-4b7a-8f46-45dda16c7e46.jpg?v=1788690252"},{"product_id":"sr-smith-la34-actuator-for-splash-lift-100-5000a","title":"S.R. Smith LA34 Actuator for Splash! Lift, 100-5000A","description":"\u003cp\u003eThe S.R. Smith 100-5000A is the LA34 actuator for the Splash! pool lift. It is the genuine factory part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe actuator is the powered ram at the heart of the lift. It is what extends and retracts to raise the seat out of the water and lower it back in, so when it stops working the lift stops working.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the model on your lift. This actuator is listed for the Splash! lift, and S.R. Smith uses different actuators across the rest of its range. Have the part number 100-5000A to hand when you compare against the unit you are replacing.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48625743626452,"sku":"SRS-42-3012","price":1305.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_62b75cb4-7f38-4745-92b6-c3d6c39ba7fe.png?v=1788690627"},{"product_id":"aqua-creek-f-004abv-24v-vito-rechargeable-battery","title":"Aqua Creek 24V Vito Rechargeable Battery, F-004ABV","description":"\u003cp\u003eThe Aqua Creek F-004ABV is the 24V rechargeable battery for the Vito pool lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it connects\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cord comes out of the back of the battery and mates with a matching cord on the lift control box. The same cord connects the pack to the charger, so charging is a matter of unplugging from the lift and plugging into the charger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the most life out of it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePut the pack on the charger any time the lift is not in use. Batteries left sitting partly discharged do not last as long, and a lift that runs out mid session is the failure mode nobody wants. Many facilities keep a second pack so one is always charged and ready.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48626109874388,"sku":"ACP-42-4061","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6cb33ffd-2ff0-44c2-b1c8-24f6cc95da3e.png?v=1788704944"},{"product_id":"aqua-creek-24v-battery-charger","title":"Aqua Creek 24v Battery Charger, F-044CH","description":"\u003cp\u003eThe Aqua Creek F-044CH is the 24v battery charger for the batteries used on all Aqua Creek powered lifts. It is supplied as the CHJ2 Linak battery charger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe charger plugs into any standard outlet and brings a lift battery back up in approximately 4 hours. Because a powered lift has to be ready whenever the pool is open, most operators keep a spare battery on charge and rotate the two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAway from a US outlet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe unit can be converted to fit non-US power sources, so it is not limited to North American installations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe charger mounting bracket is not included and is purchased separately if you want the charger fixed in place rather than sitting loose.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48626124980436,"sku":"ACP-42-4016","price":296.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b9ae18da-eb08-46c3-a7e0-c685008f845e.png?v=1788705180"},{"product_id":"aqua-creek-f-494daa-linak-400mm-actuator-pull-for-admiral-pathfinder-ranger-2-and-spa-series","title":"Aqua Creek Linak 400mm Actuator Pull for Admiral, Pathfinder, Ranger 2, and Spa Series, F-494DAA","description":"\u003cp\u003eThe Aqua Creek F-494DAA is the Linak 400mm actuator, pull configuration, used on the Admiral, Pathfinder, Ranger 2 and Spa Series pool lifts. It is the genuine Aqua Creek part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe actuator is the motorized drive that moves the lift. Every raise and lower cycle goes through it, which makes it one of the few parts on a lift that genuinely wears out. When it stops, the lift stops, and on a commercial pool that means an accessibility problem the same day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eActuators come in push and pull versions and in different lengths. This listing is the 400mm pull actuator. Check your lift model against the list above, and check whether your unit uses the pull or the push variant, before ordering.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48626228592852,"sku":"ACP-42-1170","price":946.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f204992d-32f0-465e-b1ff-e95aa09a46b4.png?v=1788706586"},{"product_id":"spectrum-153605-motion-trek-lift-charger-cradle","title":"Spectrum Aquatics Motion Trek Lift Charger Cradle, 153605","description":"\u003cp\u003eThe Spectrum Aquatics 153605 is the replacement charger cradle for the Motion Trek pool lift. It fits the BP 350, the BP 400 and the Deluxe versions of both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the charging works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cradle is the docking point for the lift battery. It works in conjunction with the AC\/DC adapter, which supplies the power. Between charges the battery sits in the cradle, which is why the cradle takes the wear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pool lift is only available if its battery is charged, so a cradle that has stopped making reliable contact takes the whole lift out of service. If a battery that should be good is not charging, the cradle is worth checking before you replace the battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cradle itself. The AC\/DC adapter and the battery are ordered separately.\u003c\/p\u003e","brand":"Spectrum Aquatics","offers":[{"title":"Default Title","offer_id":48626497454292,"sku":"SPM-42-8604","price":125.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4d3e129e-59e0-4c87-9cee-438872d39b88.png?v=1788710976"},{"product_id":"sr-smith-100-3500-axs-1000-eu-lift-linak-battery-charger","title":"S.R. Smith Linak Battery Charger for aXs, PAL and Splash Lifts, 100-3500","description":"\u003cp\u003eThis is the genuine S.R. Smith 100-3500 Linak battery charger, the 24 volt charger used on the aXs, PAL and Splash pool lifts. The same part number is also listed for the aXs 1000 and EU lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCharger or battery?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a lift stops holding charge, the battery gets blamed first, but the charger fails just as often and the symptoms are the same. Confirm the charger is putting out a charge before replacing the battery pack, and check the connector and cord while you are there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched to the battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLinak batteries expect a Linak charge profile. Using the correct charger keeps the pack charging the way it was designed to, which is the simplest way to get full service life out of an expensive battery.\u003c\/p\u003e\u003cp\u003eIt is a direct replacement for the original charger, so there is nothing to modify on the lift.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627358761172,"sku":"RMI-42-1026","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_22d34ea8-9bd1-4f9f-94f8-123d71eeb519.jpg?v=1788722822"},{"product_id":"aqua-creek-f-450ssc-g-gray-solar-lift-cover-for-scout-2-scout-excel-lifts","title":"Aqua Creek Solar Lift Cover for Scout 2 and Scout Excel Lifts, Gray, F-450SSC-G","description":"\u003cp\u003eThe Aqua Creek F-450SSC-G is a gray solar charger lift cover for the Scout 2 and Scout Excel (F-SCTXL) pool lifts. It is a protective fabric cover for the lift when it is not in use. The manufacturer lists this part for use with the solar charger option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial and color\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover is heavyweight polyester. Aqua Creek describes the fabric as durable, breathable, quick drying and highly water resistant. Standard covers like this one have a PVC coating and are pigment dyed, and the standard range comes in blue, tan and gray. This one is gray. A logo may or may not appear on the cover, depending on what the supplier has available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Scout Excel (F-SCTXL) is the current Aqua Creek model in this family and replaced the Scout 2. Cover part numbers change with the lift, the color and the fabric grade, so match the part number to your lift before you order. A cover is a wear item. When the fabric is worn through, torn or damaged, a new cover in the same color puts the lift back under protection.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48627643744468,"sku":"ACP-42-1099","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_44736e24-0f93-4a31-a2bc-ba801566133b.png?v=1788725793"},{"product_id":"blue-protective-lift-cover","title":"Global Pool Products Deluxe Protective Lift Cover for Commercial, Proformance and Superior Series, Blue, GLCPCB","description":"\u003cp\u003eThe Global Pool Products GLCPCB is a blue deluxe lift cover made for pool lifts in the Commercial, Proformance and Superior Series, sold without a lift.\u003c\/p\u003e\u003cp\u003eA pool lift is a deck fixture that sits in the weather through the season. Fitting a cover over the seat and mast when the pool is closed keeps sun, rain and dust off the lift between uses. Compared with the standard covers, the deluxe grade is thicker and holds up better, and this blue one resists UV, water and weather.\u003c\/p\u003e\u003cp\u003eOrder by part number and match your lift to the series first. The L Series, SXR, H-300 and H-350 lifts take a different deluxe blue cover, GLCPCXB. The cover is replaced when the fabric wears or sun fades it, not on a set schedule.\u003c\/p\u003e","brand":"Global Pool Products","offers":[{"title":"Default Title","offer_id":48627652985044,"sku":"GLO-42-0033","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/global-pool-products-glcpcb-blue-protective-lift-cover.jpg?v=1788725838"},{"product_id":"liftoperator-intelligent-4-button-control-box","title":"S.R. Smith LiftOperator Intelligent 4-Button Control Box, 400-7000","description":"\u003cp\u003eThe S.R. Smith 400-7000 is the LiftOperator intelligent 4-button control box for the PAL, PAL2, Splash and aXs pool lifts. It is the factory part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it controls\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe control box is the brain between the buttons and the lift actuator. Four buttons cover the movements a bather needs, which is what allows the lift to be used without a second person standing by. When the box fails, the lift stops responding and the access it provides goes away with it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith sells the 4-button hand control, the battery and the battery charger as separate items for these same lifts. If the lift is dead, work out whether the fault is the control box, the hand control or the power source before you buy, so you replace the part that actually failed.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627952320724,"sku":"SRS-42-2001","price":582.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_da2584af-0c73-44ab-a09c-50bb20eccd35.jpg?v=1788730804"},{"product_id":"aqua-creek-f-astspa-nebula-neptune-concrete-anchor","title":"Aqua Creek Nebula \u0026 Neptune Concrete Anchor, F-ASTSPA","description":"\u003cp\u003eThe Aqua Creek F-ASTSPA is the concrete anchor for the Nebula and Neptune lifts. It is the deck side hardware the lift mounts into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lift is only as sound as what holds it down. The anchor is set into the concrete deck and the lift seats into it, which is what lets the unit be removed for storage without losing its mounting point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek lists this anchor for the Nebula and Neptune. Anchors are matched to specific lifts, so confirm the model you are working with. The anchor is sold on its own.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48627952943316,"sku":"ACP-F-ASTSPA","price":147.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ea03085a-db22-44ea-a4d9-4738aec9b4dd.png?v=1788730830"},{"product_id":"new-style-battery-charger-for-multilift-pal-splash-axs-pool-lifts","title":"S.R. Smith New Style Battery Charger for Multilift, PAL, Splash and aXs Pool Lifts, 1001530","description":"\u003cp\u003eThe S.R. Smith 1001530 is the new style standard battery charger for the 24 volt LiftOperator battery system on the multiLift2, PAL2, Splash! and aXs2 pool lifts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese lifts run on a 24 volt rechargeable battery under the LiftOperator control, and the charger keeps that battery topped up between uses. S.R. Smith supplies a charger with each of the four lifts and lists it in its brochure as the standard battery charger, 1001530-R. One charger covers a facility that runs more than one of these lifts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCharger only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe battery is not included. The LiftOperator battery is a separate S.R. Smith part, 1001495-R. If a lift will not hold a charge, work out whether the charger or the battery has failed before you order, because replacing the wrong one leaves the lift out of use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith also lists a BC marked charger, 1001530-BC, for lifts built with its 2018 energy compliant LiftOperator, and states that those systems are not compatible with standard units. Match the charger to the control on your lift. Lifts still on the earlier Linak control are a different system, and S.R. Smith sells upgrade kits 1001540 and 1001550 to move them to LiftOperator.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48627954122964,"sku":"1001530","price":161.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_41d8f64c-1209-487e-8638-b7830977852d.jpg?v=1788730890"},{"product_id":"spectrum-aquatics-153604-motion-trek-ac-dc-adapter","title":"Spectrum Aquatics Motion Trek AC\/DC Adapter, 153604","description":"\u003cp\u003eSpectrum Aquatics 153604 is the replacement AC\/DC adapter for the Motion Trek pool lift. It is listed for the BP 350, BP 400, BP 350 Deluxe and BP 400 Deluxe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits into the charging system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Motion Trek runs on a removable battery that charges off a cradle. This adapter is the piece that supplies the cradle. Without it the cradle has no power, so the battery slowly drains through use and the lift eventually stops responding at the poolside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you replace the battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a lift stops holding a charge, the adapter is the cheaper thing to rule out first. It lives on a wet deck, gets stepped on, and its cord takes the strain every time the cradle is moved. A failed or intermittent adapter presents exactly like a dead battery. This listing covers the adapter only; the cradle and the battery are separate parts.\u003c\/p\u003e","brand":"Spectrum Aquatics","offers":[{"title":"Default Title","offer_id":48627954811092,"sku":"SPM-42-8605","price":182.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_31b51961-7230-4ec5-922d-68396eebcbce.png?v=1788730916"},{"product_id":"aqua-creek-f-rvgrkt15-base-gear-kit-revolution-pool-lift-2015-and-newer-models","title":"Aqua Creek Base Gear Kit for Revolution Pool Lift, 2015 and Newer, F-RVGRKT15","description":"\u003cp\u003eThe Aqua Creek F-RVGRKT15 is a base gear kit for the Revolution pool lift, 2015 and newer models. It is a Brand OEM repair kit that gathers the base gear parts needed for the job into one order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is needed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek says to replace these parts as needed, so there is no set interval: wear in the base gear is what calls for the kit. A pool lift is access equipment, and the base gear helps carry the load, which is why Aqua Creek ties the kit to keeping the lift performing safely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is specified for the Revolution lift from the 2015 model year on. Check the model year of your lift before you order, and note that this kit is not listed for other lift families.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48627983515860,"sku":"ACP-42-1210","price":573.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_892932d4-abca-4c26-86d9-f7ffc343b06a.png?v=1788732388"},{"product_id":"aqua-creek-f-30220-ez-series-anchor-kit-for-paver-applications","title":"Aqua Creek EZ Series Anchor Kit for Paver Applications, F-30220","description":"\u003cp\u003eThe Aqua Creek F-30220 is the EZ Series anchor kit for paver applications, the anchor that mounts an EZ 2, Power EZ 2 or Super Power EZ pool lift to a deck laid with pavers. Aqua Creek states that every EZ Series lift requires an anchor installed into a sturdy deck to function correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek lists F-30220 for the EZ 2, the Power EZ 2 and the Super Power EZ. Its own catalog name for the part is EZ Series Paver Deck Anchor. This listing is the anchor only, and the lift is a separate purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing by deck type\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek makes a different EZ Series anchor for each kind of surface. F-033EZA is the standard anchor for concrete decks, F-30600 is for wood decks, and F-035EZSM is the surface mount anchor for the top of a boat dock. F-30220 is the paver version. Where the lift has to reach over a wide gutter at the pool edge, the F-031473EZ anchor extension arm adds up to 30 inches of reach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm how your deck is built, because an anchor written for concrete or wood is not a substitute for the paver kit. Aqua Creek publishes a specification sheet and an installation manual for F-30220, and the paver requirements and parts list are in those documents.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628740063444,"sku":"ACP-42-1144","price":514.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_080bb9c7-2135-4388-aaec-17d1e9c1cfd9.png?v=1788749491"},{"product_id":"aqua-creek-f-40220-at1-wood-deck-anchor-kit","title":"Aqua Creek Wood Deck Anchor Kit, F-40220-AT1","description":"\u003cp\u003eThe Aqua Creek F-40220-AT1 is the Pro Series wood deck anchor kit. It lets a Ranger 2 or Admiral pool lift be mounted on a wood deck rather than the concrete an anchor is usually set into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is built\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate is stainless and powder coated, with threaded nuts welded to the back side so the lift mounting hardware has solid threads to pull against. A bonding lug is included with the kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the lift is a Ranger 2 or an Admiral, since the anchor is matched to those models, and confirm the deck structure underneath will carry a lift under load. This is the anchor only, not the lift.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628742455508,"sku":"ACP-42-4155","price":510.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7e4cd883-2de3-4c41-82c6-0193973b7d48.png?v=1788749533"},{"product_id":"mighty-lift-tan-cover","title":"Aqua Creek Mighty 400 and Mighty 600 Series Lift Cover, Tan, F-MTLCT","description":"\u003cp\u003eThe Aqua Creek F-MTLCT is a tan standard cover that goes over Mighty 400 and Mighty 600 series pool lifts when they are not in use.\u003c\/p\u003e\u003cp\u003eAqua Creek cuts its lift covers from a heavyweight polyester. This standard grade has a PVC coating and a pigment dye, and the same grade is sold in blue and gray. The premium grade, with a polyurethane coating that is dyed in the solution to resist fading, is only made in blue.\u003c\/p\u003e\u003cp\u003ePutting the cover on when the pool is closed or the lift is idle keeps sun, rain and dirt off the mechanism. No replacement interval is published, so swap it when the fabric is torn or worn through. A logo may or may not be present, depending on the supplier.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628754120916,"sku":"ACP-42-1037","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/f-mtlc_mighty-lift-cover-colors_28638034-de35-4e35-bbf8-48cf549a0d65.jpg?v=1788749752"},{"product_id":"aqua-creek-f-sbgr-base-gear-kit-for-scout-elite-ultra-pool-lifts","title":"Aqua Creek Base Gear Kit for Scout\/Elite\/Ultra Pool Lifts, F-SBGR","description":"\u003cp\u003eThe Aqua Creek F-SBGR is the base gear kit for the Scout, Elite and Ultra pool lifts. It is a genuine Aqua Creek product and it is supplied as a kit of the required base gear parts, not as a single component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the base gear does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe base is the part of the lift that stays fixed while everything above it turns and lifts. Its gearing takes the load of a person and the arm together every time the lift is used, which is why Aqua Creek lists these parts as a serviceable set rather than as permanent structure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplace as needed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek calls for replacement as needed, for performance and for safety. That is worth taking literally on a lift: the equipment carries a person over the water, so gear that is showing wear gets changed rather than watched.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm F-SBGR against your lift documentation. The kit covers the Scout, Elite and Ultra families, so knowing which model you are working on settles it.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628758675668,"sku":"ACP-42-1211","price":582.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f22ffd69-8a3b-4b9c-9249-3c19d0508c64.png?v=1788749825"},{"product_id":"4-point-pool-lift-anchor-kit-4","title":"Aqua Creek 4-Point Pool Lift Anchor Kit, 4\" Inserts, F-04CAJP","description":"\u003cp\u003eThe Aqua Creek F-04CAJP is the standard anchor kit for Aqua Creek pool lifts, in the 4-point AT pattern with 4 inch inserts. Aqua Creek lists it for the Pathfinder, the Ranger, the PRO and the EXT base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe deck side of the install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pool lift is only as solid as what holds it down. The anchor kit is the set of inserts that goes into the pool deck, and the lift base then bolts to it. This kit uses the four point layout rather than a single center anchor, so the pattern has to be set correctly when the deck work is done.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm two things: that your lift base takes the 4-point AT pattern, and that 4 inch inserts suit your deck. Anchor work is not something you want to redo once concrete has cured, so check the base against the kit first, and order the kit before the deck is poured wherever the schedule allows it.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628816085204,"sku":"ACP-42-4141","price":408.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4573e949-4ba0-4e8b-8cdc-30d3b0ef5ab0.jpg?v=1788752401"},{"product_id":"lift-operator-battery-for-axs","title":"S.R. Smith Lift-Operator Old Style Battery for PAL, Splash! and aXs Pool Lifts, 100-2000","description":"\u003cp\u003eThe S.R. Smith 100-2000 is the old style Lift-Operator rechargeable battery for PAL, Splash and aXs pool lifts purchased before 2011.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOld style or new style\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith sold two generations of this battery. The quick test is on the control box: a red emergency stop button means the lift takes the newer pack, and no button means it takes this older one. Buying the wrong generation is the usual mistake, so look at the box before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lift runs entirely from this battery at the deck, so a tired pack shows up as a lift that stops partway through a cycle, runs slowly, or will not move even after a full charge. This listing is the battery alone. The charger is a separate part, so check whether it is also due.\u003c\/p\u003e\u003cp\u003eCalifornia installations need the CEC compliant BC version of the battery, charger and control box, which are not interchangeable with the standard parts.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48628831617236,"sku":"RMI-42-1031","price":418.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SRS-100-2000_1a.png?v=1788753635"},{"product_id":"aqua-creek-f-037xxls-50-x-39-5-sling-assembly-for-adults","title":"Aqua Creek 50\" x 39.5\" Sling Assembly for Adults, F-037XXLS","description":"\u003cp\u003eThe Aqua Creek F-037XXLS is a 50 by 39.5 inch sling assembly for adults, part of the seating range offered across Aqua Creek pool lifts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sling is made from a heavy 9 oz Denier PVC coated mesh, specified as durable and mildew resistant. That combination matters for a seat that spends its life wet and in the sun: the mesh drains rather than holding water, and the coating is what keeps it from breaking down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing a sling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek offers a range of seating so a lift can be matched to the people using it. That range runs from longer slings through heavy duty versions with two layers of mesh and added reinforcement at stress points, down to smaller slings for children. This one is at the larger adult end of that range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSeating options are tied to lift models, so confirm this sling assembly against the lift you are fitting it to.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628844134612,"sku":"ACP-42-1154","price":368.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bc68f4c4-fd50-4188-9e2b-3d31a1bb176a.png?v=1788755170"},{"product_id":"standard-anchor-for-scout-pool-lifts","title":"Aqua Creek Standard Anchor for Scout Pool Lifts, F-808SA","description":"\u003cp\u003eThe Aqua Creek F-808SA is the standard anchor for Scout series pool lifts. It is the genuine Aqua Creek Products part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe anchor is the fixed point in the deck that the Scout lift seats into. Without it the lift has nothing to mount to. Buyers reach for this part either because their lift shipped without an anchor, or because they want a second anchored position so one lift can serve two places on the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the version\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the standard anchor. Aqua Creek also lists deeper anchor sockets for the Scout and Mighty, so confirm which one your installation calls for before ordering.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628850983124,"sku":"ACP-42-4112","price":93.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d165f4a4-686f-4cae-a491-7bdbf8da22f1.png?v=1788755325"},{"product_id":"aqua-creek-products-f-033eza-standard-anchor-for-ez-power-ez-pool-lifts-400-lbs-capacity","title":"Aqua Creek Standard Anchor for EZ\/Power EZ Pool Lifts, F-033EZA","description":"\u003cp\u003eThe Aqua Creek F-033EZA is the standard anchor for the EZ and Power EZ pool lifts, rated for 400 lbs capacity. It is the genuine Aqua Creek part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe anchor is what ties the lift to the deck. Order this one to replace an anchor that has been damaged or lost at an existing lift position, or to keep a spare on hand at a facility that cannot afford downtime on an accessibility lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnchors have to match the lift they hold. Confirm that F-033EZA is the anchor specified for your EZ or Power EZ installation before ordering.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628855996628,"sku":"ACP-42-4020","price":92.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5aa393d3-2369-40d2-bafb-b3c4ef15edb4.png?v=1788755440"},{"product_id":"lift-operator-battery","title":"S.R. Smith Lift-Operator New Style Battery for multiLift, PAL, Splash! and aXs Pool Lifts, 1001495","description":"\u003cp\u003eThe S.R. Smith 1001495 is the new style 24 V rechargeable Lift-Operator battery for multiLift, PAL, Splash and aXs pool lifts built from January 2012.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew style or old style\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith made two generations of this pack. Look at the lift control box: a red emergency stop button means the lift takes this battery, and no button means it takes the older 100-2000. The new pack only works on lifts that use the LiftOperator Intelligent Control, so check the build date on the data plate before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lift runs each cycle off this battery, so seat travel, rotation and the hold under load all depend on it. Batteries age whether or not the lift gets used, which is why a lift that sat through a closed season often needs one. The pack is non-spillable and is also listed as 1001495-R.\u003c\/p\u003e\u003cp\u003eThe charger is not included. It is a separate part, number 1001530 in the Splash parts list. California installations need the CEC compliant BC version of the battery, charger and control box, which are not interchangeable with the standard parts.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48628861403348,"sku":"SRS-42-3007","price":372.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6c9230c0-97ae-4929-a2c3-263b196e8493.jpg?v=1788755648"},{"product_id":"aqua-creek-f-038ezhb-standard-hanger-bar-for-ez-series","title":"Aqua Creek Standard Hanger Bar for EZ Series, F-038EZHB","description":"\u003cp\u003eThe Aqua Creek F-038EZHB is the standard hanger bar for the Standard EZ Series pool lifts. It is the piece that connects the sling to the lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is built\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bar is made from heavy duty materials and carries 2 points of attachment, which is the standard configuration for the EZ Series. It hangs from the lift and the sling clips to it, so every bit of load in the system passes through this one component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA hanger bar supports a person over water. Anything that compromises it, a bend, a crack, corrosion around the attachment points or worn hardware, takes the lift out of service until the bar is replaced. Inspect it as part of your regular lift checks rather than waiting for a problem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSlings and the EZ Series chain set are ordered separately, so check what else on the lift is due while you have it apart.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628893581524,"sku":"ACP-42-1220","price":322.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_24490151-1f60-4dc9-80d3-f2b923ae7a7f.jpg?v=1788757050"},{"product_id":"scout-2-vito-2-port-control-box-for-rotational-style-lifts","title":"Aqua Creek Scout 2 Vito 2 Port Control Box for Rotational Style Lifts, F-41CBJV","description":"\u003cp\u003eThe Aqua Creek F-41CBJV is a two port Vito control box for Scout 2 and other rotational style pool lifts. The battery and the hand controller connect to this box, and it controls the operation of the lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSingle port or dual port\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSingle port control boxes are used on lifts that do not have powered rotation features, such as the Ranger 2 and the Admiral. Dual port control boxes serve the lifts that have both lifting and rotation. Count the ports on the box you are replacing and match it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLinak or Vito\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDepending on the model of lift you have, you will have either a Linak or a Vito brand control box fitted. This is the Vito version, so read the name on your existing box before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOlder lifts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOlder models may not have had a charge window showing the current battery charge level. The newer boxes are typically interchangeable with those, so a lift without a charge window can usually take this one.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628897251540,"sku":"ACP-42-4153","price":344.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9de07993-d65a-4039-a7d3-2b53d0448326.jpg?v=1788757094"},{"product_id":"aqua-creek-f-031ezch-ez-series-slings-chain-set","title":"Aqua Creek EZ Series Slings Chain Set, F-031EZCH","description":"\u003cp\u003eThe Aqua Creek F-031EZCH is the chain set for EZ Series lift slings. It holds the sling from the header bar, which makes it part of the load path every time the lift is used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe chain set connects the sling to the header bar on an Aqua Creek EZ Series lift. It is matched to the EZ Series sling rather than being a generic length of chain, so ordering by the part number is what keeps the geometry right.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek treats the chain set as a replace as needed item for optimal safety and performance. Anything carrying a person gets judged strictly: visible wear, a distorted link or damaged hardware is enough reason to change it rather than run another season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the listing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe chain set on its own. Slings and hanger bars for the EZ Series are ordered separately.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628907213012,"sku":"ACP-42-1217","price":316.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_952e28d3-bc71-4580-914f-f42982289069.png?v=1788757160"},{"product_id":"aqua-creek-24-volt-battery","title":"Aqua Creek 24 Volt Battery, F-004AB","description":"\u003cp\u003eThe Aqua Creek F-004AB is the 24 volt DC battery used on Aqua Creek pool lifts built with Linak systems. It is the factory pack, not a substitute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA battery powered lift is only as available as its battery. When the pack stops holding a charge, the lift is out of service, and for a facility that means an accessibility feature nobody can rely on. Replacing the battery is the direct fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCharging and spares\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pack is charged with the Aqua Creek F-044CH charger, which is sold on its own. Operators who cannot afford downtime often keep a second battery charged and ready so the lift is never waiting on the charger to finish.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628909670612,"sku":"ACP-42-4060","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_08136d6d-1f93-4da2-a61e-fe67ef098b43.jpg?v=1788757182"},{"product_id":"tan-lift-cover","title":"Aqua Creek Pro Series Lift Cover for Ranger 2 and Admiral, Tan, F-120PPC-T","description":"\u003cp\u003eThe Aqua Creek F-120PPC-T is a tan lift cover for the Aqua Creek Pro Series pool lifts, made from heavyweight polyester fabric.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed for the Ranger, Ranger 2, Admiral, Pro Pool, Pro Pool XR, Portable Pro, Portable Pro 2, Patriot, Pathfinder and Ambassador lifts. Match the cover to your lift by model name, since other Aqua Creek lift families use their own covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFabric and color\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek describes its standard covers as polyester with a PVC coating, pigment dyed, durable and breathable, and quick to dry. Standard covers come in blue, tan and gray, and this listing is the tan version. A logo may or may not appear on the cover.\u003c\/p\u003e\u003cp\u003eA lift left on the deck sits in sun, weather and grit all year. Putting the cover on between uses and through the closed season keeps that exposure off the frame and the moving parts.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628909736148,"sku":"ACP-42-4145","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/f-120ppc-t-tan-lift-cover.jpg?v=1788757186"},{"product_id":"aqua-creek-f-120ppc-g-pro-series-gray-pool-lift-cover","title":"Aqua Creek Pro Series Lift Cover for Admiral, Ranger and Portable Pro, Gray, F-120PPC-G","description":"\u003cp\u003eThe Aqua Creek F-120PPC-G is a gray standard cover for Pro Series pool lifts, including the Admiral, Ambassador, Patriot, Pathfinder, Pro Pool, Pro Pool XR, Portable Pro, Portable Pro 2, Ranger and Ranger 2.\u003c\/p\u003e\u003cp\u003eAqua Creek cuts its covers from heavyweight polyester. The standard grade has a PVC coating and a pigment dye and is offered in blue, tan and gray, and gray is the color here. The premium grade has a more flexible polyurethane coating and is solution dyed to resist fading, and it is made only in blue.\u003c\/p\u003e\u003cp\u003eSun, rain and airborne grit all wear on a lift that stays on the deck. A cover that goes on between uses and over a closed season slows that wear. Aqua Creek does not publish a replacement interval, so replace the cover when the fabric tears or wears through. A logo may or may not appear, depending on the supplier.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48628909899988,"sku":"ACP-42-1068","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2cdb575e-81b3-406d-8974-76c5c9b1abf1.png?v=1788757190"},{"product_id":"ranger-vito-control-box","title":"Aqua Creek Ranger Vito Control Box, F-40CBJV","description":"\u003cp\u003eThe Aqua Creek F-40CBJV is the replacement control box for the Ranger Vito pool lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe control box holds the electronics that read the operator controls and drive the lift. When a lift powers up but will not respond, or responds unpredictably, the control box is one of the first places a technician looks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm that your lift is the Ranger Vito, since Aqua Creek builds several Ranger variants and the control boxes are not interchangeable across them. A pool lift carries people over water, so have the replacement installed and function tested by someone who services this equipment.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48629102379220,"sku":"ACP-42-4154","price":346.99,"currency_code":"USD","in_stock":false}]},{"product_id":"aqua-creek-f-036rss-38-x-20-sling-assembly-for-adult-with-seat-belt-and-rigid-insert","title":"Aqua Creek 38\" x 20\" Sling Assembly for Adult with Seat Belt and Rigid Insert, F-036RSS","description":"\u003cp\u003eThe Aqua Creek F-036RSS is a 38 by 20 inch sling assembly for an adult, supplied with a seat belt and a rigid insert.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial and construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek sling seats are made from a heavy 9 oz Denier PVC coated mesh, chosen for strength and for its resistance to mildew. That matters on a seat that spends its life wet, sitting in chlorinated water and then drying in the sun between uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSeat belt and rigid insert\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis version carries both options. The seat belt secures the occupant during the transfer, and the rigid insert holds the seat in shape instead of letting the mesh fold, which gives more support to a user who needs it. Aqua Creek builds slings across a range of sizes and duties, from longer slings and heavy duty two layer versions with reinforcement at the stress points down to smaller slings for children.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSling choice depends on the lift as well as the person using it. Our facts for this item do not list which Aqua Creek lift models it attaches to, so match the part number F-036RSS against your lift and its hanger bar rather than ordering on the dimensions alone.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48629119090900,"sku":"ACP-42-1152","price":252.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_13f91d14-ed3d-4e32-a36f-d10d2e043f51.png?v=1788759876"},{"product_id":"aqua-creek-f-ezbl-c-blue-solar-lift-cover-for-ez-ez-2-power-ez-power-ez-2-lifts","title":"Aqua Creek Solar Lift Cover for EZ, EZ-2, Power EZ and Power EZ-2 Lifts, Blue, F-EZBL-C","description":"\u003cp\u003eThe Aqua Creek F-EZBL-C is a blue solar charger lift cover for the EZ, EZ-2, Power EZ and Power EZ-2 pool lifts. It is a protective fabric cover for the lift when it is not in use. The manufacturer lists this part for use with the solar charger option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial and color\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover is heavyweight polyester. Aqua Creek describes the fabric as durable, breathable, quick drying and highly water resistant. Standard covers like this one have a PVC coating and are pigment dyed, and the standard range comes in blue, tan and gray. This one is blue. A logo may or may not appear on the cover, depending on what the supplier has available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis number covers the whole EZ family named in the title. The Power EZ 2 (F-PEZPL2) is the current model in that family. Cover part numbers change with the lift, the color and the fabric grade, so match the part number to your lift before you order. A cover is a wear item. When the fabric is worn through, torn or damaged, a new cover in the same color puts the lift back under protection.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48629278703828,"sku":"ACP-42-1156","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d45f80e4-b2a7-457c-aaa6-d9a3dbde3563.jpg?v=1788761855"},{"product_id":"aqua-creek-f-ajspa-neptune-nebula-lifts-jig-tool","title":"Aqua Creek Neptune and Nebula Lifts Jig Tool, F-AJSPA","description":"\u003cp\u003eThe Aqua Creek F-AJSPA is the anchor jig tool for the Spa Series pool lifts, the Neptune and the Nebula. Aqua Creek lists it as the Jig Plate Tool Option and recommends it for easier installation of the lift anchor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA jig is an installer tool that serves as a template, holding the anchor locations in position while the anchors are set so that everything lines up. It does its work during installation and is not a component that stays on the lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek shows the jig as an option on both the Neptune and Nebula product pages, with a specification sheet titled Spa Series Anchor Jig Tool. Those lifts use their own Spa Series anchors: F-ASTSPA for concrete decks, F-AWDSPA for wood decks and F-APVSPA for pavers. The Spa Series anchors do not suit the older Spa Lift Ultra or Elite, which use different anchors, so match the tool to the lift family you are installing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tool is sold on its own and is not a spare part for a lift that is already installed. Read the specification sheet and your installation instructions together before you start, since the jig is a recommended option and the anchor kit carries the deck specific instructions.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48633371459796,"sku":"ACP-F-AJSPA","price":151.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_35705ac4-da1a-4e29-aec2-7936b4eb970d.png?v=1788798642"},{"product_id":"aqua-creek-f-ubc-blue-universal-battery-control-box-cover","title":"Aqua Creek Universal Battery and Control Box Cover, Blue, F-UBC","description":"\u003cp\u003eThe Aqua Creek F-UBC is a blue universal cover for the battery and control box on an Aqua Creek pool lift. It covers the electrical end of the lift, the part that has to stay dry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek calls this the universal style and lists it for the Pro Pool series (Ranger 2, Admiral, Portable Pro 2), the Mighty series (400, 600, Voyager), Scout 2 and Scout Excel, Revolution and Titan 600, the Spa Series, and the EZ family (Power EZ, Power EZ-2, Super Power EZ). Some older lifts used a sock style cover that wrapped the battery, control box and actuator as one piece, so check which style yours has before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial and color\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eElectronics covers are cut from the same standard cover material as the rest of the Aqua Creek range, heavyweight polyester with a PVC coating, pigment dyed. The universal cover is offered in blue, tan and gray, each under its own part number, and this one is blue. A new cover is a sensible replacement once the fabric is worn or torn.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48634375864532,"sku":"ACP-42-1197","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_34c56fc8-1449-4ab4-a8d7-ac2c921bd868.png?v=1788828742"},{"product_id":"aqua-creek-f-45acb-ct-tan-actuator-electronics-covers","title":"Aqua Creek Tan Actuator Electronics Covers, F-45ACB-CT","description":"\u003cp\u003eThe Aqua Creek F-45ACB-CT is the tan electronics cover for Aqua Creek pool lifts. It is the fabric shield that keeps sun, rain and splash off the parts of a lift that least enjoy any of them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it goes over\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua Creek lifts ship with a protective cover over the electrical control box and battery. The sock style cover goes further and wraps the battery, control box and actuator together, and Aqua Creek lists that style for the Pro Pool Lift, Ranger AT, Pro Pool XR, Ambassador, Portable Pro Pool and Patriot AT. Current lifts more often use the universal electrical cover, offered in blue, tan and gray. Check which style is on your lift before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lift lives outdoors on a hot deck, within reach of chlorinated splash, all season. The battery and control box are the expensive parts, and a cover is by far the cheapest thing standing between them and the weather. When the original cover fades through, splits at a seam or goes missing over a winter, replacing it is straightforward maintenance.\u003c\/p\u003e\u003cp\u003eMade from the same standard cover material Aqua Creek uses across its accessory line, in tan.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48634385891540,"sku":"ACP-42-4146","price":51.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9ced60b4-23a9-411b-b549-41ee6c524e7a.png?v=1788828955"},{"product_id":"aqua-creek-f-38sb-pro-pool-ranger-pool-lift-seat-belt","title":"Aqua Creek Pro-Pool\/Ranger Pool Lift Seat Belt, F-38SB","description":"\u003cp\u003eThe Aqua Creek F-38SB is the replacement seat belt for the Pro-Pool and Ranger pool lifts. It is the genuine Aqua Creek part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lift carries someone out over the water and lowers them in, and a belt across the lap is what keeps them contained in the seat while that happens. It guards against a fall out of the chair, and just as importantly it gives the rider something to trust, which makes the whole transfer calmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is designed for the Aqua Creek Pro-Pool and Ranger lifts, and Aqua Creek also offers it as an addition to PVC pool access chairs. Buy it to replace a belt that is frayed, cut or missing, or to add one to a chair that never had it.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48634522370260,"sku":"ACP-42-8503","price":33.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_da8963cc-b8e6-4ce0-a530-1d1d9aac20c5.jpg?v=1788833759"},{"product_id":"aqua-creek-f-vtc002-vito-24v-battery-test-cable","title":"Aqua Creek Vito 24V Battery Test Cable, F-VTC002","description":"\u003cp\u003eThe Aqua Creek F-VTC002 is the battery test cable for the 24V Vito pool lift. It is a service accessory, used to check the lift battery when the lift is not responding.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy start at the battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pool lift that will not raise or lower generates the same complaint whatever the cause, and the battery is both the most common culprit and the cheapest thing to rule out. Working through it in order, battery first, means you are not pulling a control box or ordering an actuator on a hunch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis cable is listed for the Aqua Creek Vito on a 24V system. Aqua Creek build several lift families and their accessories are not interchangeable, so check the model plate on your lift before ordering.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48634612809940,"sku":"ACP-42-1180","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fb0e1dea-d6a3-47ab-a518-830709b9663e.png?v=1788835408"},{"product_id":"sr-smith-24-vdc-motor-assembly-120-2100a-120-2100a-r","title":"S.R. Smith 24 VDC Motor Assembly, 120-2100A-R","description":"\u003cp\u003eThis is the S.R. Smith 24 VDC motor assembly, part number 120-2100A-R. It is also listed under the number 120-2100A, and both refer to the same assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch on the part number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe listing gives the voltage and the part number but does not name the equipment it goes into. The safe way to order is to read the number off the motor you are replacing, or off the parts list for your unit, and match it to 120-2100A or 120-2100A-R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat to expect\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt arrives as a complete motor assembly. Because it runs on 24 volts DC, it is not a substitute for a line voltage motor of similar size.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48645962957012,"sku":"PSU-182618","price":566.99,"currency_code":"USD","in_stock":true}]},{"product_id":"liftlock2-anchor-assembly-cast-316l-ss","title":"S.R. Smith LiftLock2 Anchor Assembly, Cast 316L Stainless Steel, 300-6600L","description":"\u003cp\u003eThe S.R. Smith 300-6600L is the LiftLock2 anchor assembly, cast in type 316L stainless steel. It is the deck side fixing that locks a pool lift in position, and the anchor cap is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the grade matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn anchor sits in the deck, gets splashed with chlorinated water all season and drains slowly. Ordinary stainless pits under those conditions. Type 316L is specified for exactly this kind of exposure, and casting it rather than fabricating it gives a stronger, simpler part with fewer places for water to sit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe anchor is set in the deck and the lift drops into it and locks. That means the lift can be taken out of service, moved or stored without disturbing the fixing, and put back in the same position each time. When the lift is out, the supplied cap closes off the anchor so the deck stays flush and clear.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48645965545684,"sku":"SRS-42-0031","price":436.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_188b6dfb-5996-4197-8b18-8dc811a98963.png?v=1788975279"},{"product_id":"sr-smith-axs2-lift-cover-tan-ax9006","title":"S.R. Smith aXs2 Pool Lift Cover, All Weather, Tan, AX9006","description":"\u003cp\u003eThe S.R. Smith AX9006 is the tan, all weather cover for the aXs2 pool lift, made to protect the entire lift, including the base, actuator arm and seat, from the elements.\u003c\/p\u003e\u003cp\u003eA pool lift stays outdoors on a wet, chlorinated deck. A cover keeps sun, rain and debris off the moving parts and the seat between uses, and a covered lift also signals that it is not for casual use. The cover goes on over the lift where it stands.\u003c\/p\u003e\u003cp\u003eThe AX9006 fits the aXs2 pool lifts, such as the 310-0000N. S.R. Smith builds several lift models and each has its own cover, so confirm the model on your lift before you order. For a California installation of the lift, the battery, charger and control box must be the CEC compliant BC versions, which are not interchangeable with the standard parts.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48645966266580,"sku":"PSU-168525","price":725.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/168525_0_201844151727.jpg?v=1788975290"},{"product_id":"tan-cover-for-splash-pal-pal2-pool-lifts","title":"S.R. Smith Lift Cover for Splash!, PAL and PAL2 Pool Lifts, Tan, 920-5000T","description":"\u003cp\u003eThe S.R. Smith 920-5000T is a tan, all weather lift cover for the PAL, PAL2 and standard Splash pool lifts.\u003c\/p\u003e\u003cp\u003eA pool lift spends its life on an open deck, exposed to sun, rain and grit. This cover goes over the lift between uses. On a PAL or PAL2 it protects the seat and the actuator arm. On a Splash it reaches further and also covers the base, so more of the lift stays out of the weather.\u003c\/p\u003e\u003cp\u003eThe cover is tan and is designed specifically for the PAL and Splash lifts, so it is not a general purpose tarp. A covered lift also signals that it is not for casual use. The multiLift has its own cover, and other lift series use different ones, so confirm your series before ordering. Replace the cover when the fabric wears through or no longer shelters the seat.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48645967118548,"sku":"RMI-42-4501","price":685.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/sr-smith-920-5000t-tan-cover-for-splash-palpal2-pool-lifts.jpg?v=1788975303"},{"product_id":"sr-smith-lift-operator-four-button-hand-control-1001600","title":"S.R. Smith 4-Button LiftOperator Hand Control, 100-4300-R","description":"\u003cp\u003eThis is the S.R. Smith LiftOperator four button hand control, part number 100-4300-R. It carries up, down, left and right on a single handset.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe part that wears out first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA hand control lives a hard life. It is handled wet, it hangs off the lift in the sun, and its cable gets pulled and pinched. When buttons stop responding or the housing cracks, the handset is the failure, and replacing it is normally quicker and cheaper than troubleshooting further into the lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eS.R. Smith paperwork shows this control under more than one number. The manufacturer part number is 100-4300-R, and the same handset also turns up as 1001600 and 1004300. Any of those on your manual or service records points here. Check that your lift is set up for the four button control before ordering.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48646280413396,"sku":"SRS-42-8525","price":264.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_21bcca78-7cbf-4f63-835f-73a409263b6c.png?v=1788987735"},{"product_id":"global-lift-t1-motion-battery-t5068-2","title":"Global Pool Products TiMotion 24 V Battery for Commercial, Legend, Superior, Proformance and Rotational Lifts, T5068-2","description":"\u003cp\u003eThe Global Pool Products T5068-2 is the 24 V TiMotion replacement battery for Global pool lifts, supplied as a single battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacturer lists the T5068-2 for the Commercial C-375 and C-450 lifts and for the Legend, Superior, Proformance and Rotational Series lifts built after 2016. These are the Global lifts that use the TiMotion control system, so the battery is matched to that controller. Order by part number and confirm your lift series and build year first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCharging and coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCharging takes the matching TiMotion battery charger, part number T5068-17. The manufacturer lists battery coverage at 1 year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the battery only and is sold individually. The charger is a separate part.\u003c\/p\u003e","brand":"Global Pool Products","offers":[{"title":"Default Title","offer_id":48646299680980,"sku":"GLO-42-0050","price":474.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_59060d79-2482-4cb6-b244-ccab0f2665fd.png?v=1788987874"},{"product_id":"sr-smith-liftoperator™-pool-lift-intelligent-control-upgrade-kit-2-button-1001540","title":"S.R. Smith LiftOperator Intelligent Control Upgrade Kit, 2 Button, 1001540","description":"\u003cp\u003eThe S.R. Smith 1001540 is the LiftOperator Intelligent Control upgrade kit in the 2 button version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the fit first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is not named in the owner manual parts lists for the PAL2, Splash!, aXs2, PAL or multiLift2, so match it to your lift by serial number with S.R. Smith before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the LiftOperator\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn the S.R. Smith manuals, the LiftOperator Intelligent Control has battery level LEDs, a red emergency stop button, a service LED that lights after 120 battery swaps and a USB port that downloads a log of lift events. The new style 1001495 battery works only on lifts with this control. Since January 2, 2018, S.R. Smith lifts bound for California use the CEC compliant BC versions of the LiftOperator battery, charger and control box, and those BC parts do not interchange with the standard LiftOperator parts.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48647556006100,"sku":"PSU-139768","price":826.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/139768_1_201111112633.jpg?v=1789034849"},{"product_id":"sr-smith-new-construction-anchor-jig-kit-for-multilift-500-5000","title":"S.R. Smith New Construction Anchor Jig Kit for multiLift Pool Lifts, 500-5000","description":"\u003cp\u003eThe S.R. Smith 500-5000 is the new construction anchor jig kit for multiLift pool lifts, carried under OEM part number 500-5000.\u003c\/p\u003e\u003cp\u003eIt is an anchor part for new construction, made by S.R. Smith for the multiLift line. A jig positions the anchor, so this kit is for the stage of a new pool or deck when the lift anchor is being set, before the lift itself is installed.\u003c\/p\u003e\u003cp\u003eThis item is the kit only, sold individually. Confirm that your lift is a multiLift and that your pool is new construction before ordering.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48647978909908,"sku":"PSU-139763","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/139763_4_201110281499.jpg?v=1789036775"},{"product_id":"9-x-12-pool-spa-lift-available-sign","title":"S.R. Smith Pool and Spa Lift Available Sign, 9 x 12 in. Metal, 900-5000","description":"\u003cp\u003eThe S.R. Smith 900-5000 is a 9 by 12 in. metal sign that reads Pool\/Spa Lift Available, posted at a facility so guests know a pool or spa lift is on site.\u003c\/p\u003e\u003cp\u003eThe sign is 9 in. wide and 12 in. tall and made of metal. Mount it near the pool entrance or the lift itself so swimmers who need the lift can find it without asking. Because it only announces that a lift exists, it suits any pool or spa lift installation, not just S.R. Smith models.\u003c\/p\u003e\u003cp\u003eMounting hardware is not described for this item, so plan your own fasteners for the wall or post you choose.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48648794341588,"sku":"RMI-42-5000","price":117.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/139766_1_2011125115948.jpg?v=1789059282"},{"product_id":"sr-smith-pal-lift-motor-assembly-120-1000-120-1000r","title":"S.R. Smith Pal Lift Motor Assembly, Replacement Motor Assembly for the Pal Lift, 120-1000R","description":"\u003cp\u003eThe S.R. Smith 120-1000R is the motor assembly for the S.R. Smith Pal Lift.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and part numbers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a replacement motor assembly for the Pal Lift. The same part is also listed as 120-1000 and 120-1000-R, so any of those numbers refers to this assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe listing is one motor assembly, sold individually. Confirm that your lift is a Pal Lift before ordering.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":48659358646484,"sku":"PSU-144958","price":806.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/55308_0_2024107151357.jpg?v=1789251428"},{"product_id":"aqua-creek-products-f-824-anchor-adapter-for-scout-pool-lifts","title":"Aqua Creek Plastic Anchor Adapter Sleeve for Scout, Mighty 400 and Mighty 600 Pool Lifts, F-824","description":"\u003cp\u003eThe Aqua Creek F-824 is a plastic anchor adapter sleeve that lets an Aqua Creek Scout, Mighty 400 or Mighty 600 pool lift mount in an existing deck anchor with a 2-3\/8 in. outer diameter and a 1.95 in. inner diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a pool already has an older anchor set in the deck, the sleeve lines up and seats the base of a newer Aqua Creek lift in it. That means no core drilling for a replacement anchor and no pulling out the old one, which keeps the existing deck intact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUse it with the Scout, Mighty 400 and Mighty 600 lifts. Before ordering, measure the anchor that is already in your deck and confirm it is 2-3\/8 in. across the outside and 1.95 in. across the inside. Anchor sizes differ between lift brands and older installations, so a quick measurement avoids a wrong order.\u003c\/p\u003e\u003cp\u003eThe F-824 is sold as a single sleeve. The lift and its seat are not part of this item.\u003c\/p\u003e","brand":"Aqua Creek","offers":[{"title":"Default Title","offer_id":48694053109972,"sku":"ACP-42-4115","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/F-824.jpg?v=1789765538"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/collections\/default_2cdb575e-81b3-406d-8974-76c5c9b1abf1.png?v=1791839750","url":"https:\/\/www.activepoolsupply.com\/collections\/pool-lift-parts.oembed?page=5","provider":"Active Pool Supply","version":"1.0","type":"link"}