{"title":"Pump Parts \u0026 Motors","description":"\u003cp\u003eReplacement pool pump motors, impellers, seals, housings, lids and baskets for every major pump line.\u003c\/p\u003e","products":[{"product_id":"b2854-1-5hp-115-230v-ur-56y","title":"Century 1-1\/2 HP 3450 RPM 56Y Frame Square Flange Pool Pump Motor, 115\/230V","description":"\u003cp\u003eThe Century B2854V1 is a single speed 1-1\/2 HP, 3450 RPM pool pump motor in the 56Y square flange frame, wired for 115 or 230 volts. It is the motor used on the Pentair WhisperFlo, Challenger and Pinnacle pumps and on the Sta-Rite Max-E-Pro, and it replaces the older Century stock numbers B854 and B2854V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1.5 HP output (1.1 kW), 1.1 service factor, 16.0\/8.0 A at 115\/230 V, 60 Hz, single phase, continuous duty. The enclosure is drip proof, the motor is thermally protected with Class F insulation, and it is UL Recognized and CSA certified. Electrically it is a permanent split capacitor design with across the line starting, two poles, counterclockwise rotation at the pump end and ball bearings at both ends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOverall length 12.95 in., frame length 8.50 in. The shaft is 1\/2 threaded, 0.625 in. in diameter with a 0.91 in. extension, on a rolled steel frame. A new shaft seal is normal practice when changing a motor; the seal and gasket kits for WhisperFlo and Challenger are listed with the related parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot be shipped to California. Century builds six CEC compliant replacements in the V-Green EVO line, EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225, which also cut running cost through variable speed operation.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624546939092,"sku":"MGT-60-2989","price":319.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6bef0f35-281b-4ff9-8db1-069457b250e0.jpg?v=1788643204"},{"product_id":"pump-housing-eq-series","title":"Pentair Pump Housing, EQ Series","description":"\u003cp\u003eThis is the genuine Pentair replacement pump housing for EQ Series commercial pool pumps, part number 356755. It is a new OEM part, not a rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for the Pentair EQ Series. Confirm 356755 against the EQ Series parts diagram for your pump before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 5-3\/4 in. ID lid o-ring is a separate part. If the old one is flattened or cracked, replace it at the same time so the new housing seals properly.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624551919828,"sku":"PAC-101-6502","price":1475.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dd78a9e1-e8d3-4b1b-b560-81df84f27deb.jpg?v=1788642999"},{"product_id":"pot-optiflo","title":"Pentair OptiFlo Strainer Pot with Drain Plug","description":"\u003cp\u003eThe Pentair 357228Z is the strainer pot for the OptiFlo above ground pool and spa pump, supplied with its drain plugs. It also fits the Jacuzzi JPA Pro Grade pump that Leslie's sells as 622383, which shares the same wet end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePots crack when water is left in them over a freeze or when the lid is cranked down too hard. Once the pot leaks, the pump draws air, loses prime and runs hot. Replacing the pot restores the seal without replacing the whole pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pot body and the drain plugs. The lid, lid o-ring, clamp and basket are not part of this listing, so check those while the pump is apart.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624552902868,"sku":"PAC-101-0019","price":41.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_85f16557-4f41-481b-a715-45068584b97a.jpg?v=1788643040"},{"product_id":"lid-lock-ring-assembly-w-seal-phpf-phpm","title":"Jandy Lid \u0026 Lock-Ring Assembly with Seal, PHPF\/PHPM","description":"\u003cp\u003eThe Jandy R0448800 is the genuine replacement lid and lock ring assembly for Plus HP PHPF and PHPM pumps. It comes as a kit of three parts: the clear trap lid, the black lock ring assembly and the lid o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed for the Plus HP PHPF and PHPM, and the same assembly is used on the MaxHP MHPM and WaterFeature WFTR series. The lid is 7-13\/16 in. across, clear plastic, with a four tab twist lock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOld part numbers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit replaces A0578200 and A0578100. If you look at your existing clear lid you will find A0578100 stamped into it. That lid is not sold on its own, only as part of this kit.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624831496404,"sku":"TLD-101-2012","price":72.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f6c7ccb9-6d01-4c75-8a20-c1b77e616413.jpg?v=1788643124"},{"product_id":"3-2kw-intellifloxfvsf-vsf-vs-svrs-i1-i2-motor","title":"Pentair 3.2 kW IntelliFloXF VSF, VSF, VS+SVRS, i1, i2 Motor","description":"\u003cp\u003eThe Pentair 350305S is the 3.2 kW, 10 pole variable speed motor fitted to the larger IntelliFlo pumps. It is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIntelliFloXF variable speed pumps built after August 2015, IntelliFlo 2 VST pumps, IntelliFlo i1 and i2 pumps built after April 2016 and IntelliFlo VS+SVRS pumps built after June 2016.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacture date matters. Check the date code on your pump label and confirm it falls inside the ranges above before ordering. Pumps built before those dates use a different motor.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624833134804,"sku":"PUR-101-3257","price":789.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/PUR-101-3257_1a.png?v=1788643401"},{"product_id":"volute-replacement-kit","title":"Pentair WhisperFlo and IntelliFlo Volute Housing Replacement Kit","description":"\u003cp\u003ePentair 357149 replaces the entire housing side of a WhisperFlo or IntelliFlo pump in one order. It covers the WhisperFlo and WFE pump and pot, and the IntelliFlo VS, VF, VS-SVRS and i1 pumps, which all share this wet end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump housing 350015, seal plate kit 350201 with the mechanical shaft seal, lid 357151, the clamp, cam and ramp lock ring 357199, basket 070387, drain plug 071131, two drain plug gaskets 092115 and two lid o-rings 350013. Everything that seals is new, which is what makes a housing rebuild hold pressure the first time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReach for the full kit when the volute is cracked, when the drain plug threads have given up, or when the seal plate, lid and lock ring are all showing their age at once. The impeller and motor are not part of the kit; they bolt back on to the new seal plate. If a single component has failed, the part numbers above can be ordered individually instead.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624833265876,"sku":"PAC-101-1465","price":284.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2a1e5940-26c9-4c4d-8736-8dbdc6a4c1f7.png?v=1788643300"},{"product_id":"6-pump-trap-assembly-2x2","title":"Waterway 6 in. Pump Trap Assembly, 2 in. x 2 in. Ports","description":"\u003cp\u003eWaterway 310-6600 is the complete 6 in. strainer trap for Waterway pumps plumbed in 2 in. It is the assembly seen on the front of the Waterway Hi-Flow pump and is listed for the Premier and Renegade model 756 pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe trap body with 2 in. x 2 in. ports and its drain plug, the new style lid assembly with o-ring, a pump basket, and the split nut assembly with its two screws. That is every piece needed to replace a cracked or leaking trap without hunting down small parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck your port size. This trap is 2 in. on both ports; Waterway also offers the 6 in. trap in 1.5 in. x 1.5 in. and 1.5 in. x 2 in. Note that Waterway has temporarily changed the color of the replacement trap, so you may receive a gray trap rather than the one pictured. It is the same part.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48624833298644,"sku":"WWP-101-8061","price":69.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f4ab90cb-7c1e-4607-ac98-8aed73bda88e.jpg?v=1788643305"},{"product_id":"pentair-356922z-drive-kit-with-keypad","title":"Pentair IntelliFlo VSF Drive Kit With Keypad","description":"\u003cp\u003eThe Pentair 356922Z is the original drive kit with keypad for the IntelliFlo VSF variable speed and flow pump. The drive is the electronics package on top of the motor that runs the variable speed control and the display, and replacing it as a kit with the keypad restores the pump when the motor itself is still good.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the part number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair has released a newer drive for the same pump, part number 356944Z, and a newer drive kit, 356971Z. The 356922Z here is the original version. If you are matching an existing part or a service quote, check which number you were given.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your pump is the IntelliFlo VSF and not the IntelliFlo VS or the IntelliFlo3, which use different drives. Disconnect power at the breaker before any work on the drive.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624869966036,"sku":"PUR-101-0108","price":1202.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/356922Z_pentiar_drivekit.jpg?v=1788647578"},{"product_id":"hayward-spx3206z1vspe-2-7hp-tristar-vs-g3-pump-power-end-assembly","title":"Hayward 2.7 HP TriStar VS G3 Pump Power End Assembly","description":"\u003cp\u003eThe Hayward SPX3206Z1VSPE is the power end assembly for the 2.7 HP TriStar VS G3 variable speed pump: the motor, drive and digital control interface as one genuine Hayward unit. It replaces the electrical half of the pump while keeping the existing wet end, strainer and plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward's 2.7 THP variable speed family is the most energy efficient variable speed pump in the industry. The totally enclosed permanent magnet motor, paired with the pump's hydraulic design, is what delivers those savings, and it runs quietly at the low speeds a pool spends most of its day at.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe digital control interface can be mounted in any of four positions on the pump or taken off and mounted on a wall. The pump programs as a stand alone unit or takes commands from a Hayward or third party automation controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your pump is the TriStar VS G3 at 2.7 HP. This is the power end only; it does not include the housing or wet end.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624871309524,"sku":"HAY-101-1252","price":1694.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPX3206Z1VSPE.jpg?v=1788647673"},{"product_id":"hayward-spx3202z1vspe-tristar-vs-power-end-motor-unit-assembly","title":"Hayward TriStar VS 1.85 Power End Motor Unit Assembly (Non-SVRS)","description":"\u003cp\u003eThe Hayward SPX3202Z1VSPE is the power end motor unit assembly for the TriStar VS 1.85 and the TriStar VS 900 Omni, in the non-SVRS version. It is the genuine Hayward part for the TriStar VS pump series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the power end is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a variable speed pump the motor and its drive are the expensive half. When they fail and the housing, strainer and plumbing are still sound, the power end is the repair: it bolts to the existing wet end and the pump goes back into service without replumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your pump is the 1.85 HP TriStar VS or the TriStar VS 900 Omni and that it is not an SVRS model, which uses a different assembly. Plan on a new shaft seal and housing o-ring for the reassembly, matched to your pump model.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624872521940,"sku":"HAY-101-1642","price":1256.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPX3206Z1VSPE_front.jpg?v=1788647797"},{"product_id":"century-b2855-replacement-motor","title":"Century 56Y Frame ODP Square Flange Pool \u0026 Spa Pump Motor 2HP 230V","description":"\u003cp\u003eThe Century B2855 is a 2 HP, 230 V single speed replacement motor on the 56Y square flange, the fit for Pentair Challenger, WhisperFlo, SuperFlo and Pinnacle pumps and for the Jandy Stealth SHPF and SHPM series. It is an open drip proof motor rated for continuous duty at a 50 C ambient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSingle phase, 60 Hz, 3450 rpm, service factor 1.1 with 10.0 A at service factor, 1.5 kW output, insulation class B, thermally protected. The design is permanent split capacitor and switchless, so there is no centrifugal start switch to stick or burn. Bearings are sealed ball at both ends, the shaft is stainless steel with a 1\/2 in. thread, and rotation is counterclockwise from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e13.46 in. overall length with a 9.00 in. frame, 0.625 in. shaft diameter and 0.91 in. shaft extension. Mounting is horizontal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot ship to a California address. For a California install, Century offers V-Green EVO variable speed models EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225 that meet the CEC standard.\u003c\/p\u003e\u003cp\u003ePlan on a new shaft seal with any motor swap. Seal kits for the Challenger, WhisperFlo, SuperFlo, Pinnacle and Jandy SHPF and SHPM pumps are sold separately.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624872947924,"sku":"MGT-60-2985","price":391.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b9fc6cb4-d273-4baa-ac09-483b9496d38b.png?v=1788647869"},{"product_id":"drive-cover","title":"Pentair SuperFlo VS Drive Cover","description":"\u003cp\u003eThe Pentair 353123 is the genuine drive cover for the SuperFlo VS variable speed pool pump. It sits over the drive on top of the motor and keeps dirt, dust, water and debris off the electronics underneath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSun and weather eventually crack or fade the original, and a cover that has gone missing leaves the drive open to the elements. The cover is the cheap part; the drive it protects is not. Replacing it as soon as it is damaged is the sensible order of operations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and install\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for the SuperFlo VS, the variable speed pump, not the single speed SuperFlo. Remove the old cover, set the new one in place and secure it. The drive, keypad and motor are not included.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624873406676,"sku":"PAC-101-1002","price":276.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5d26f510-4b13-4b82-b746-116d2d588974.jpg?v=1788647934"},{"product_id":"pump-body-shpf-shpm","title":"Jandy Pump Body for Stealth SHPF\/SHPM Pumps","description":"\u003cp\u003eThe Jandy R0445601 is the genuine pump body for the Stealth SHPF and SHPM pumps, and it is shared by the WaterFall SWF series and the ePump JEP variable speed pump. It is a unibody housing, meaning the strainer trap and the volute are one molded piece, so a crack in either means replacing this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnections\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth suction and discharge are male buttress thread, the same as the original, so the existing Jandy unions thread straight back on without cutting pipe. The trap takes the standard four tab twist lock lid with an 8-13\/16 in. outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is not in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe drain plugs are not included; they are Jandy part R0446000. The lid and locking ring, strainer basket, seal plate and motor all transfer from your existing pump. Plan on new o-rings while everything is apart.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624873636052,"sku":"TLD-101-2008","price":331.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_71d40024-1614-4819-ba38-436a839f5889.jpg?v=1788647955"},{"product_id":"superflo-pump-housing","title":"Pentair Superflo Pump Housing, Volute","description":"\u003cp\u003eThe Pentair 350089Z is the volute housing for SuperFlo and SuperFlo VS pool pumps, the main pump body that holds water around the impeller and directs it to the discharge. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA housing goes bad in a few predictable ways: a crack from freezing or a hard knock, a drain plug thread that no longer seals, or a union thread that has been stripped by overtightening. Any of those means a leak and a pump that struggles to hold prime. If the motor, seal plate and impeller are still good, swapping the housing is a far cheaper repair than a new pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the housing only. The seal plate, impeller, diffuser, motor and fasteners carry over from your existing pump, so it is a good moment to inspect the shaft seal and diffuser o-ring and replace them if they are worn.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624875765972,"sku":"PAC-101-0089","price":259.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dd02e2d9-c8ed-4c40-b79f-77a35e843cd9.jpg?v=1788648463"},{"product_id":"pump-union-cpvc-1-1-2-slip-by-male-thread-with-o-ring","title":"CMP Pump Union CPVC 1-1\/2\" Slip by Male Thread with O-Ring","description":"\u003cp\u003eThe CMP 21063-154-000 is a 1-1\/2 in. CPVC pump union with a slip socket on one side and a male threaded end with o-ring on the other. It is the fitting that lets a pool pump be unbolted from the plumbing for service instead of being cut out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it connects\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe slip end solvent welds onto 1-1\/2 in. pipe. The male threaded end screws into the pump housing. The union nut in the middle draws the two halves together on an o-ring, which means the joint can be opened and closed as often as needed without a new gasket each time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CPVC\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCPVC handles warmer water than standard PVC, so this union is a sensible choice on the pump side of a heater loop or anywhere the plumbing sees heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 1-1\/2 in. slip version. If your suction or return side is plumbed in 2 in. pipe, CMP also makes a 1-1\/2 in. thread by 2 in. slip hi-temp union, part 21063-160-000.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624877502676,"sku":"SPG-56-0012","price":17.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_763d0994-baac-4337-be26-abdd0544e397.jpg?v=1788648550"},{"product_id":"front-housing-volute-with-o-ring-pb4-60-new-style","title":"Polaris Front Housing Volute Cover with O-Ring","description":"\u003cp\u003eThe Polaris R0536300 is the front housing volute for the new style PB4-60 booster pump. It ships with its drain plug and o-ring, so the housing goes back on the pump with a fresh seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich PB4-60 do you have?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis volute fits PB4-60 pumps manufactured from 2011 to current, serial number PB120111001 and later. The quickest check is the housing cover: on the new style the ridges extending from the center hole are curved, on the old style they are straight. Straight ridges mean you need the P5 volute rather than this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cracked or warped volute is one of the usual reasons a booster pump starts spraying water at the front. The housing comes off without disturbing the motor, and with the drain plug and o-ring already included there is nothing else to source for the housing itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the pump has been leaking for a while, consider replacing the backplate o-ring and the 13\/16 in. shaft seal at the same time. Both are separate parts.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624877994196,"sku":"POL-101-5363","price":66.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7c76ca57-fb3a-4602-a092-51b478b89803.jpg?v=1788648580"},{"product_id":"pump-union-threaded-2-mpt-x-2-slip-cpvc","title":"CMP Pump Union, Threaded 2\" MPT x 2\" Slip, CPVC","description":"\u003cp\u003eThis CMP union puts a detachable joint between your pool pump and the plumbing. One end is 2 in. male pipe thread that screws into the pump port, the other is a 2 in. slip socket that glues onto the pipe. When the pump needs to come off, back off the union nut and lift it out. Nothing gets cut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy CPVC matters here\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump unions live next to the hottest part of the system. If a pump runs dry or overheats, an ordinary PVC union can shrink and open a suction leak that is hard to find. This union is molded from heat tolerant CPVC, which holds its shape through that kind of abuse.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCMP sizes it for Pentair WhisperFlo, IntelliFlo and Challenger pumps, and it works on any pump with a 2 in. female threaded port. It is sold individually, so order two to union both the suction and discharge sides.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624879435988,"sku":"CTM-56-2001","price":20.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a6e9a8aa-f71b-41d9-90a4-f7c916beeec1.jpg?v=1788648718"},{"product_id":"pump-housing-body","title":"Jandy Pump Housing Body for FHPM FloPro \u0026 VS FloPro","description":"\u003cp\u003eThe Jandy R0479800 is the genuine replacement pump housing body for the FloPro FHPM series and the VS FloPro. It is the wet end shell that holds the strainer basket and carries the suction and discharge connections, and it is the part to order when a housing has frozen, cracked or started leaking at the seams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits the single speed FHPM models from 0.75 through 2.5 HP and the variable speed VS FloPro. Your existing motor and internal parts transfer over.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the housing only. The pump basket, lid with lock ring, lid o-ring, diffuser and the 2 in. tailpiece o-rings and union nuts are separate parts. If any of them are worn, this is a convenient time to replace them.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624879468756,"sku":"TLD-101-2045","price":202.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7f5ebc54-7cf5-4744-b736-e9b54e257563.jpg?v=1788648722"},{"product_id":"flush-union-connectors","title":"Hayward Flush Union Connectors","description":"\u003cp\u003eThe Hayward SP1500UNPAK2C is the genuine set of flush union connectors for Power-Flo pumps. The connectors are 1-1\/2 in. socket, so they solvent weld to standard 1-1\/2 in. PVC and give the pump a detachable joint at each port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThey fit the Power-Flo SP1500 series and the Power-Flo II SP1700 and SP1700UN, and they are also used on the Power-Flo Matrix SP1590 series and the Super Spa SP-3500.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy bother with unions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOnce unions are in place, removing the pump is a matter of loosening two nuts. Motor changes, seal work and pulling the pump for winter all happen without cutting or regluing pipe. This pack includes connectors for both ports.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624879599828,"sku":"HAY-101-1391","price":26.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0c8e40f9-8a85-41b8-ac0f-e605e271e533.png?v=1788648756"},{"product_id":"threaded-shaft-motor","title":"Hayward Genuine OEM Max Rate Threaded Shaft Motor 2 HP","description":"\u003cp\u003eThe Hayward SPX1615Z1M is the 2 HP max rate threaded shaft motor used on three of Hayward's most common pumps: the Super Pump SP1600X and SP2600X series, the Super II SP3000X series and the Max-Flo SP2800X series. It is the genuine Hayward part, so it bolts to the seal plate and takes the impeller without adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor is dual voltage, 115 or 230 volts at 60 Hz. Check the voltage setting on the motor against your supply before you wire it, because a 230 V feed into a motor set for 115 V will not last long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the pump is apart\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRemoving the motor means separating the seal plate from the housing and pulling the impeller, which disturbs the shaft seal. Fit a new seal and look over the housing gasket and o-rings before you close it back up; it is far cheaper than doing the job twice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShipping restriction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor cannot be shipped to California.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624880287956,"sku":"HAY-101-9769","price":545.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c982bba4-1390-4291-94cd-d8ab57d21e2f.jpg?v=1788648867"},{"product_id":"pump-housing-strainer-2-x-2","title":"Hayward 2\" x 2\" Super Pump Strainer Housing","description":"\u003cp\u003eThe Hayward SPX1620AA is the strainer housing, the front pot of the pump that holds the basket, for Super Pump models with 2 in. x 2 in. ports. It is the genuine Hayward part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits Super Pump SP1600, SP1600X, SP2600 and SP2600X pumps plumbed in 2 in. Super Pumps plumbed in 1-1\/2 in. take the 1-1\/2 in. housing instead, so check the port size before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing only. The strainer lid, basket and housing gasket are separate and transfer over from the old housing if they are still in good condition. A new housing gasket is cheap insurance when the pump is apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA housing cracked by a freeze, a lid seat worn so the pump pulls air, or damaged port threads are the usual reasons. Replacing the housing keeps the rest of the pump in service.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624881172692,"sku":"HAY-101-2030","price":338.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_10324e5b-52b3-43a8-ae18-516750e107be.png?v=1788649284"},{"product_id":"superflo-vst-drive-test","title":"Pentair SuperFlo VST Motor Drive Kit","description":"\u003cp\u003eThe Pentair 356282 is the motor drive kit for the SuperFlo VST variable speed pool pump. The drive is the electronics package on the motor that sets and holds pump speed. It is a genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA SuperFlo VST that will not hold its programmed speeds, throws drive faults or will not power up may have a failed drive. Replacing the drive alone keeps the motor and wet end in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck part number 356282 against the parts list for your pump. The kit does not include the motor.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624881533140,"sku":"PAC-101-0034","price":808.01,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3ad28aef-e552-48ef-8361-7b21744bf046.png?v=1788649337"},{"product_id":"pentair-357527z-keypad-assembly-kit-with-keypad-cover-almond","title":"Pentair IntelliFlo Keypad Cover Kit, Almond","description":"\u003cp\u003eThe Pentair 357527Z is the keypad assembly kit with top cover for IntelliFlo variable speed pumps, in almond. It is the genuine Pentair part: the keypad itself together with the cover that protects it on the front of the drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplace the kit when buttons stop responding, when the cover has cracked or faded in the sun, or when the keypad has taken water. Because the keypad ships assembled with its cover, the swap is a straight exchange rather than a rebuild.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your pump is an IntelliFlo and that almond is the finish you need. If you want the controls mounted away from the pump, Pentair offers a separate keypad relocation kit.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624883564756,"sku":"PUR-101-3255","price":315.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5ea1e35c-e56d-4d81-9b8c-77c17bc07b15.jpg?v=1788649516"},{"product_id":"flange-6-w-gaskets-ss-hardware","title":"Pentair Flange 6\" with Gaskets and SS Hardware","description":"\u003cp\u003eThe Pentair 357263 is the 6 in. flange assembly kit for Pentair commercial pumps, supplied with the gaskets and stainless steel hardware needed to make up the connection. It fits the EQ Series, C-Series and Aurora commercial pump lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEverything for the joint\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe flange, its gaskets and the stainless fasteners come together, so a repipe or a pump swap does not stall waiting on a separate gasket or bolt order. Stainless hardware holds up in a damp equipment room where plated steel would rust.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 6 in. kit. Pentair also offers the 4 in. kit as part 357262 and the 3 in. kit as part 357261 for pumps with smaller connections.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624883630292,"sku":"PUR-101-7263","price":212.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d04290a1-a4ee-46b0-881c-db045825aa3e.jpg?v=1788649525"},{"product_id":"pump-motor-56j-up-rated-1-hp-115-230v","title":"Century 1 HP Pump Motor, 230\/115 Volt, 3450 RPM, Round Flange, 56J Frame, ODP","description":"\u003cp\u003eThe Century UST1102, also sold under the A.O. Smith name, is a 1 HP up rated replacement motor for the Hayward Super Pump, Super II and Max-Flo II. It is a 56J round flange motor with a 7\/16 in. threaded shaft, wired for 230 or 115 volts at 3450 rpm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNameplate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1 HP output with a 1.10 service factor, 7.5 A at 230 V or 15.0 A at 115 V, single phase, 60 Hz, single speed. The enclosure is open drip proof with automatic thermal protection, a 50 C ambient rating and class B insulation. Starting is capacitor start, capacitor run, across the line, with a sealed switch design. Rotation is counterclockwise from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft is 303 stainless steel, 0.625 in. in diameter with a 2.56 in. extension and a 304 bearing at the shaft end. Ball bearings at both ends, a rolled steel frame, 13.53 in. overall and 7.75 in. frame length. A new shaft seal is standard practice when swapping the motor; the Super Pump seal kit and Super II rebuild kit are listed separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe UST1102 is not California Title 20 compliant and cannot be shipped to California. Century's CEC compliant pool motors are the V-Green EVO variable speed models EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624884285652,"sku":"AOS-60-5240","price":156.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cbaa5746-d9bf-4bb6-be8a-b2aa433093e9.jpg?v=1788649602"},{"product_id":"drive-cover-kit","title":"Pentair Drive with Cover Kit for SuperFlo VS Pump","description":"\u003cp\u003eThe Pentair 353127 is the drive and cover kit for the SuperFlo VS variable speed pump. The drive is the electronics package that controls motor speed and holds the schedule, and it is sold together with its cover as one assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA SuperFlo VS with a failed drive will fault out or stop responding to its controls even though the motor and the wet end are fine. Swapping the drive puts the pump back in service without buying a whole new pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe drive and the cover. The motor, seal and wet end parts are separate, as is the SuperFlo VS pump itself.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624884580564,"sku":"PAC-101-3100","price":405.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_533eb903-e270-4913-8cc0-a2072ed14c5b.jpg?v=1788649646"},{"product_id":"lid-locking-ring-assembly-w-o-ring","title":"Jandy Lid \u0026 Locking Ring Assembly with O-Ring","description":"\u003cp\u003eThe Jandy R0445800 is the complete lid and locking ring assembly, with o-ring, for the Jandy Stealth SHPF and SHPM pumps and the ePump JEP variable speed pumps. The lid is stamped A0577900; R0445800 is the number you order it under.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA clear plastic trap lid 10-1\/16 in. across, the 4 tab twist lock ring that holds it down and a fresh lid o-ring. Buying the three together means a cracked lid, a stripped ring or a flattened o-ring are all dealt with in one swap, and the clear lid lets you check the basket and water level without opening the pot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the pump is a Stealth SHPF or SHPM or an ePump JEP, and if you can, check that the old lid is stamped A0577900.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624885334228,"sku":"TLD-101-2031","price":104.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_04b93a9b-2765-459f-82d3-1880dc2a48f1.png?v=1788649767"},{"product_id":"strainer-pot-kit-in-almond-for-3hp-intelliflo3-pool-pump","title":"Pentair Strainer Pot Kit for 3 HP IntelliFlo3 Pool Pump, Almond","description":"\u003cp\u003eThe Pentair 356175Z is the strainer pot kit in almond for the 3 HP IntelliFlo3 variable speed pool pump. It is the genuine Pentair part, the housing on the front of the pump that holds the strainer basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe strainer pot takes the abuse on a pump: a dropped lid, a freeze, a wrench slipped on the lid ring. Once it cracks or the lid seat is damaged, the pump pulls air, loses prime or runs with a stream of bubbles in the lid. A new pot puts the suction side back to airtight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is listed for the 3 HP IntelliFlo3 in almond. Check the horsepower on the pump label and the color of the body so the new pot matches.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624885498068,"sku":"PUR-101-3643","price":243.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_74a385b8-9b80-442b-bc82-c4f0824b52e6.png?v=1788649860"},{"product_id":"backplate-kit-fhp","title":"Jandy FHP Flo Pro Backplate Kit","description":"\u003cp\u003eThe Jandy R0479500 is the genuine backplate kit for the FloPro line of pumps. It fits the FHPM series from 0.75 through 2.5 HP, the FHPF series and the VS FloPro, and it comes with the three parts the job needs: the backplate, the o-ring that seals it to the housing, and a new shaft seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe backplate is the seal plate that sits between the motor and the wet end. When it cracks or warps, water leaks out behind the impeller and air gets drawn in, which shows up as a drip under the motor or bubbles in the basket that no suction side fix will cure. The shaft seal lives in the same plate and is the pump's main wear item, so Jandy packs a fresh one with the plate rather than have you reuse a seal that has already run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate mounts in place of the original with the pump apart at the housing clamp. It covers the whole FHPM horsepower range and the VS FloPro, so one part number serves most FloPro installations.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624886382804,"sku":"TLD-101-2042","price":96.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bfca08a6-56aa-4fb0-a4d7-554979a4af3b.jpg?v=1788649941"},{"product_id":"1-65thp-vgreen-evo-sq-flange-var-speed-motor","title":"Century VGreen Evo Variable Speed 1.65 THP Square Flange Pool Pump Motor, 230\/115 V, 48Y Frame","description":"\u003cp\u003eThe Century VGreen Evo EVQ165 is a 1.65 total horsepower variable speed motor in a 48Y square flange frame, made to bolt onto an existing pump in place of its single or two speed motor. Nothing else changes: the wet end stays, the plumbing stays, and the motor carries its own controller and user interface, so there is no drive box to mount or wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy variable speed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed motor runs flat out whenever it runs, moving more water than the pool needs and paying for it in electricity. A variable speed motor turns over the same water at a lower rpm for longer, which uses a fraction of the power, runs noticeably quieter and keeps the motor cooler, which in turn extends its life. Federal DOE rules and California Title 20 now require this class of motor on most replacements, and the EVQ165 is compliant with both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgramming\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single button on the motor steps through pre programmed schedules across the 600 to 3450 rpm range. Voltage is detected automatically on 230 or 115 V, and freeze protection is built in. If the pad has automation, the motor works with Pentair EasyTouch, IntelliTouch and IntelliConnect, Hayward OmniLogic, ProLogic, OmniPL and EcoStar, and Jandy iQPump 1.0, AquaLink TCX, iAquaLink 3.1 and AquaLink RS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSquare flange, 48Y frame, threaded 0.625 in. shaft with a 1\/2-20 thread, TEFC enclosure. It replaces the motor on Pentair WhisperFlo, Max-E-Pro, SuperFlo and SuperMax, Hayward Super Pump and MaxFlo, and Jandy FloPro and PlusHP pumps. A C face version and 1.30 and 2.25 THP ratings are available in the same family. Replace the shaft seal at the same time.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624917840084,"sku":"MGT-60-4051","price":589.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/MGT-60-4051.jpg?v=1788653263"},{"product_id":"1-5hp-sqfl-motor-208v-230v-115v","title":"Pentair 1.5 HP Square Flange Motor, 208V\/230V","description":"\u003cp\u003eThe Pentair 071315S is the genuine square flange replacement motor for 1.5 HP WhisperFlo pumps. It is an energy efficient design wired for 208V or 230V, finished in almond to match the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor bolts to the WhisperFlo seal plate on the square flange pattern, so the wet end and plumbing stay put. Plan on a new shaft seal while the pump is apart; a WhisperFlo seal kit is sold separately and is cheap insurance against a leak behind the new motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot ship to California. Pool owners there should look at the Century VGreen Evo variable speed square flange motors, EVQ130, EVQ165 and EVQ225, which meet the California Energy Commission rules and fit the same pumps.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624917971156,"sku":"PUR-10-444","price":410.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f4d1576a-0b48-494f-9aec-c542d091b05d.jpg?v=1788653293"},{"product_id":"motor-full-rated-two-speed-2-0-hp-1-3-sf-230v-b2984","title":"Century Full-Rated Two-Speed Pool Pump Motor, 2.0 HP 1.3 SF 230V (B2984)","description":"\u003cp\u003eThe Century B2984 is a full rated, two speed square flange motor for pool pumps: 2.0 HP with a 1.3 service factor at 230V, switching between 3450 rpm and 1725 rpm. It is the replacement motor for Pentair Challenger and WhisperFlo, Hayward TriStar and Jandy PlusHP PHPF and PHPM pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh speed handles vacuuming, heating and heavy circulation at 11.0 amps. Low speed turns the pool over at 1725 rpm on 1.8 amps, quietly and for a fraction of the energy. Both windings are energy efficient designs: permanent split capacitor on low speed, capacitor start and capacitor run on high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eY56Y frame, open drip proof enclosure rated for 50 °C ambient, class F insulation and built in thermal protection. The 303 stainless steel shaft is 0.625 in. in diameter with 1\/2 in. threads and rides on sealed ball bearings at both ends. Rotation is counterclockwise from the pump end. Overall length is 14.40 in. with a 10.00 in. frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant. Century makes six compliant VGreen Evo variable speed motors, EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225, for installations in California.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624918069460,"sku":"MGT-60-2984","price":643.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9ba61956-3881-4828-845c-a065c9cafc49.jpg?v=1788653308"},{"product_id":"whisperflo-intelliflo-chem-salt-o3-resist-seal-set","title":"Pentair Genuine OEM Seal Kit for WhisperFlo and IntelliFlo Pool Pumps","description":"\u003cp\u003ePentair 356198 is the factory seal set for WhisperFlo and IntelliFlo pumps, in the chemical, salt and ozone resistant grade. It bundles every seal a wet end rebuild touches: the shaft seal, the seal plate gasket, the impeller screw washer, the diffuser o-ring, the strainer pot o-ring and the drain plug o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA drip from behind the seal plate, water tracking down the motor, or air in the pot that no lid tightening fixes all point to the seals. Replacing the full set at once means the pump is opened one time and every wear point is new.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSalt and chemical duty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt chlorinators, ozone and heavy chemical feed are hard on standard seals. Pentair specifies this set for exactly those conditions, so it is the right choice on any pool running a salt system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit covers both WhisperFlo and IntelliFlo. The strainer lid o-ring is not included and is a separate part if yours is flattened or cracked.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624918200532,"sku":"PUR-101-6198","price":39.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_32e057c8-0f35-42fd-99e9-930a5f795ac1.jpg?v=1788653344"},{"product_id":"tank-body-assembly","title":"Sta-Rite Pump Tank Body Housing Assembly, IntelliPro","description":"\u003cp\u003eThe Sta-Rite 17307-0110S is the tank body assembly, the strainer pot housing, for the IntelliPro VS 3050 and other IntelliPro variable speed pumps, the Max-E-Pro series and the Pentair Pinnacle. It is the genuine Pentair Sta-Rite part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing is the part that takes the abuse: freeze damage over a winter, a crack from an impact, or a drain plug port that has been overtightened until it will no longer seal. Once the body itself is compromised, a new o-ring or plug will not stop the leak and the housing has to be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is and is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the tank body on its own. The trap cover lid assembly, the V clamp that holds the lid, and the drain plug are separate part numbers. If any of those are damaged too, order them alongside the housing so the pump goes back together in one visit.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624918888660,"sku":"STA-101-1003","price":289.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3c6d6eff-9567-4058-8e6f-d666d4a4e752.jpg?v=1788653419"},{"product_id":"superflo-supermax-pump-repair-kit","title":"SuperPro Superflo \/ Supermax Pump Repair Kit","description":"\u003cp\u003eThe SuperPro GO-KIT78 is the seal and o-ring kit for Pentair SuperFlo and Sta-Rite SuperMax pool pumps. It puts the shaft seal and every o-ring you disturb during a reseal in one bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne AS-200 shaft seal, one O-130 drain plug o-ring, one O-150 lid o-ring, one O-395 diffuser o-ring and one O-465 seal plate o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA drip from the gap between the motor and the seal plate means the shaft seal has let go. Getting to it means splitting the pump, and once the pump is apart the diffuser and seal plate o-rings are exposed and cheap to change, while a new lid and drain plug o-ring stop the air leaks that cause a pump to lose prime. Doing all of it in one visit avoids opening the pump twice.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48624919871700,"sku":"SPG-601-6101","price":22.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_879213dd-e7b6-41e5-9e1b-941daa34f9a8.jpg?v=1788653445"},{"product_id":"century-pro-hsq165-square-flange-pool-and-spa-pump-motor-1-65-thp-3450-rpm-115-230-v-48y-threaded-shaft","title":"Century 1.65 HP Square Flange Pool and Spa Pump Motor, 3450 RPM 48Y, Threaded Shaft","description":"\u003cp\u003eThe Century Centurion Pro HSQ165 is a single speed replacement motor for square flange pool and spa pumps. It is rated 1.65 total horsepower at 3450 RPM with a 1.0 service factor, on a 48Y frame with a threaded 303 stainless steel shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor is single phase, 60 Hz, and runs on either 115 V or 230 V through an on board voltage change device, drawing 18.8 A or 9.4 A. It is a capacitor start, induction run design with automatic thermal protection, class F insulation and an open drip proof enclosure rated for 50 degree C ambient. UL 1081 design, UL recognized and CSA listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for the pump end\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSealed 203 bearings at both ends, with triple seal protection on the pump end bearing where water is most likely to reach. The terminal board and wiring compartment are open and accessible, and the shaft has a 7\/16 in. wrench flat so you can hold it while threading the impeller on or off. Overall length is 14.12 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia buyers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe HSQ165 is not California Title 20 compliant and cannot be shipped to California. Century makes CEC compliant V-Green EVO variable speed motors, including the square flange EVQ130, EVQ165 and EVQ225, for that market.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624919904468,"sku":"AOS-60-2723","price":309.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_176bbc02-ad68-4056-a432-27736021de8a.png?v=1788653450"},{"product_id":"challenger-front-housing","title":"Pentair Challenger Front Housing, Slip Suction, Black","description":"\u003cp\u003eThe Pentair 355468Z is the genuine front housing for PacFab Challenger High Flow and High Pressure pool pumps, in black with a slip suction connection. If the housing on your Challenger is cracked, warped from heat or leaking at the clamp, this is the factory replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing slides over the diffuser and impeller and is held to the seal plate by the large band clamp. Its other end connects to the strainer pot. The discharge port accepts a standard 2 in. threaded male PVC fitting, so the existing plumbing connection is reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your pump is a Challenger High Flow or High Pressure model and that it uses the slip suction housing. While the pump is apart it is worth checking the housing o-ring and the shaft seal, which are separate parts.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624920035540,"sku":"PAC-101-1459","price":143.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_84ccc831-b0d7-40b6-99b7-843b8c7991d7.jpg?v=1788653472"},{"product_id":"pentair-355022s-single-speed-replacement-motor-1-horsepower-115-208-230-volt-1-phase","title":"Pentair Single Speed OEM Replacement Motor, 1 Horsepower, 115\/208-230 Volt, 1 Phase","description":"\u003cp\u003eThe Pentair 355022S is a genuine single speed replacement motor rated at 1 horsepower, wired for 115 or 208-230 volt single phase supply, in an almond square flange housing. Pentair identifies it by the motor code WF-4\/26. It is the factory motor for a like for like swap when the original has failed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and wiring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe square flange bolts directly to the pump seal plate. The motor is dual voltage, so check the voltage setting against your supply before the first start. Because this is a single speed motor, it is a straight replacement rather than an efficiency upgrade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia restriction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant. It cannot be sold, shipped or installed in the state of California. Buyers there need a compliant variable speed motor.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624920068308,"sku":"PAC-101-5266","price":315.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/355022S_pentair_motor1hp.jpg?v=1788653476"},{"product_id":"purex-whisperflo-pump-go-kit32-9","title":"Aladdin Seal \u0026 Gasket Kit for Pentair WhisperFlo \u0026 IntelliFlo Pool Pumps","description":"\u003cp\u003eThe Aladdin GO-KIT32-9 is a seal and gasket kit for the Pentair WhisperFlo and IntelliFlo pump families, in both single speed and variable speed form, and it fits the older Purex WhisperFlo as well. It gathers the seals and gaskets a wet end reseal needs into one order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy you would need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a WhisperFlo starts weeping at the housing seam, dripping under the motor or drawing air into the basket, the cause is almost always a tired seal or a flattened o-ring. Rather than tracking down each piece by its Pentair number, this kit replaces them together so the pump goes back together sealed all the way around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNumbers you may know it by\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGO-KIT32-9 is the current Aladdin number. The same kit has been sold as GO-KIT32 and GOKIT32, as Optimus 8200-032, and as APCK1027. If any of those are on your old packaging, this is the replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an Aladdin Equipment Co. aftermarket kit, not a Pentair branded part. Have o-ring lubricant on hand for reassembly, and look at the strainer basket and drain plug knob while the pump is open.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48624921051348,"sku":"SPG-601-5032","price":27.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/GO-KIT32-9.png?v=1788653526"},{"product_id":"2-x-2-1-2-pump-union-assembly","title":"Jandy 2\" x 2-1\/2\" Pump Union Assembly (Set of 2)","description":"\u003cp\u003eThe Jandy R0449000 is a set of two 2 in. by 2-1\/2 in. pump unions. Each union is the full three piece assembly: a tail piece, its o-ring and the coupling nut, so the pair covers both the suction and discharge sides of a pump. It is the genuine Zodiac Jandy part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same union is used across three Jandy pump lines, the PlusHP in both PHPF and PHPM versions, the MaxHP MHPM and the WaterFeature WFTR. It is also the union on the Legacy LRZE and LRZM gas heaters from 2009 onward, so one part number covers the pump and the heater on many Jandy pads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnions are what let you pull a pump or heater without cutting pipe. A cracked coupling nut, a warped tail piece or a flattened o-ring turns into a drip at the equipment, and a new union set is the clean fix. Replacing both sides at once keeps the two connections at the same age.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624922362068,"sku":"TLD-101-2028","price":49.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d4db5336-f0a0-411f-846d-daf7ddbfeb77.png?v=1788653624"},{"product_id":"ps200-mechanical-seal-assembly","title":"U.S. Seal PS200 Mechanical Seal Assembly","description":"\u003cp\u003eThe U.S. Seal PS200 is the mechanical shaft seal assembly used on a large share of residential pool and spa pumps. It seals the motor shaft where it passes through the seal plate into the wet end, keeping pool water out of the motor. When a pump starts dripping between the housing and the motor, this is almost always the part that has worn.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne seal, several numbers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same seal is catalogued as PS-200, PS-3867, 35-423-1020 and 5250-210 by different pump makers and distributors. If your parts list shows any of those, this is the replacement. It is listed for the Pentair Challenger high head and high flow models and for the Aqua-Flo Dominator high head and Tub-Master TMCP series pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly includes both halves of the seal. Clean the seal plate bore and the shaft, press the stationary half into the plate and slide the rotating half onto the shaft without touching the polished faces. A light film of silicone lubricant on the rubber parts helps them seat. If the pump has been leaking for a while, check the motor bearings while it is apart.\u003c\/p\u003e","brand":"US Seal","offers":[{"title":"Default Title","offer_id":48624922460372,"sku":"USS-60-5021","price":11.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9625bb58-18e0-4eb2-a802-760c49233c8d.jpg?v=1788653632"},{"product_id":"motor-full-rated-two-speed-1-5-hp-1-47-sf-230v-b2983","title":"Century Full-Rated Two-Speed Motor, 1.5 HP 1.47 SF 230V (B2983)","description":"\u003cp\u003eThe Century B2983 is a full rated two speed pool pump motor: 1.5 HP with a 1.47 service factor on high, running 3450 rpm on high and 1725 rpm on low from a 230V single phase 60 Hz supply. It is listed as a replacement motor for the Hayward TriStar SP3200 and SP3200EE and for Pentair SuperFlo pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, one motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed runs everyday filtration at 1.6 A while high speed delivers 10.0 A worth of flow for vacuuming, spa jets or backwashing. Both windings are energy efficient. Electrically it is PSC on low speed and capacitor start, capacitor run on high, with two and four pole operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOpen drip proof rolled steel frame in the Y56Y size, sealed ball bearings at both ends, class F insulation with thermal protection and a 50 C ambient rating for continuous duty. The 1\/2 in. threaded shaft is 303 stainless steel, 0.625 in. in diameter with a 0.91 in. extension. Overall length is 13.90 in. with a 9.50 in. frame. Rotation is counterclockwise viewed from the pump end. UL recognized and CSA listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor does not meet California Title 20 and cannot be sold, shipped or installed in California. Century offers six CEC compliant V-Green EVO models, EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225, for pools in that state.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624922853588,"sku":"MGT-60-2983","price":535.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_15dbcba8-1825-45eb-9bf3-bdabe6e0271f.jpg?v=1788653693"},{"product_id":"polaris-booster-pumps-old-style-go-kit71","title":"Aladdin GO-KIT 71 Seal Kit for Polaris PB4-60 Booster Pump","description":"\u003cp\u003eThe Aladdin GO-KIT 71 is the seal kit for the old style Polaris PB4-60 booster pump. It packs the three parts that wear out together, the housing o-ring, the shaft seal and the shaft o-ring, so one order covers a full reseal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck your pump before ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePolaris built the PB4-60 in two styles and the seals are not the same. The quickest way to tell them apart is the housing cover: on the old style the ridges extending from the center hole are straight, on the new style they are curved. This kit is for the straight ridge pump. If yours has curved ridges, it takes a different mechanical seal and backplate o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA puddle under the booster pump, or a slow drip from behind the impeller housing, usually means the shaft seal has given up. As long as the motor runs and the housing is not cracked, a seal kit brings the pump back for a fraction of the cost of a new one.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48624922886356,"sku":"SPG-601-6091","price":16.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/go-kit71.jpg?v=1788653697"},{"product_id":"impeller-7-5hp-1ph-3ph-mh","title":"Pentair C Series Pump Impeller, 1PH or 3PH Medium Head, 7.5HP","description":"\u003cp\u003eThe Pentair 070227 is the 7-1\/2 HP medium head impeller for the C Series commercial pumps sold under both the Pentair and Purex names. It fits the single phase CM-75 and the three phase CMK-75 and CMKL-75 bronze pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCast bronze, closed face, with eight vanes. This is the CMK medium head configuration; C Series pumps were built in more than one head, so confirm yours before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions for matching\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOutside diameter across the vanes is 5-1\/8 in. Thickness at the outside edge is 1-1\/16 in. measured inside and 1-3\/8 in. measured outside. Front to back is 2-3\/4 in., not counting the 1-5\/8 in. diameter by 3\/8 in. long extension on the front face. The vaneless section measures 4-17\/32 in. outside and 4-5\/32 in. inside.\u003c\/p\u003e\u003cp\u003eThe impeller is what carries the motor's energy into the water. A worn or damaged one shows up as falling flow and rising motor load well before anything else on the pump complains, so on a commercial pump it pays to replace it as soon as the vanes show wear.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624924557524,"sku":"PUR-101-1457","price":1297.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_36afa199-7617-4bc9-8264-36ec703b8654.png?v=1788653726"},{"product_id":"1hp-motor-threaded-shaft-single-phase-60-cycle-115-230v","title":"Hayward 1HP Motor, Threaded Shaft, Single Phase, 60 Cycle 115\/230V","description":"\u003cp\u003eThe Hayward SPX1607Z1M is a 1 HP single phase replacement motor with a threaded shaft, wired for 115 or 230 volts at 60 cycles. It fits the Hayward Max-Flo, Super Pump and Super II.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat to know before ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor is built by Century, a Regal brand. Because of DOE energy efficiency regulations it may be replaced with the compatible SP26110Z1MEG, so do not be surprised if that part number arrives instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor does not meet the California Energy Commission Title 20 efficiency standard for pool pumps and replacement motors. It cannot be sold or installed in California. Century makes CEC compliant alternatives in its V-Green EVO range, the EVC130, EVC165, EVC225, EVQ130, EVQ165 and EVQ225.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA motor swap opens the pump wet end, so plan on a new shaft seal and gaskets. Rebuild kits for the Super Pump, Max-Flo and Super II are sold separately.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624927113428,"sku":"HAY-101-9934","price":372.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f8cbfb82-7cef-4217-8337-0c7f678c5b81.jpg?v=1788654733"},{"product_id":"seal-assembly-ps1000","title":"U.S. Seal PS1000 Shaft Seal Assembly","description":"\u003cp\u003eThe U.S. Seal PS1000 is the mechanical shaft seal that keeps water in the wet end of a pool pump and out of the motor. It fits pumps from Polaris, Pentair, Hayward, Astral, Jandy and Waterway, and it replaces a long list of OEM seal numbers including AS1000, VG1000, P55 and S1000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe symptom is water leaking between the motor and the seal plate. Ignored, that water tracks down the shaft into the motor bearings and ruins the motor; a motor that has started screaming has usually already been flooded and needs replacing too. Beyond that, fit a new seal any time the pump is dismantled, since a used seal rarely goes back together dry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo pieces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne half is a ceramic seat in a rubber back that presses into the seal plate. The other is a carbon face with a spring and stainless steel cup that rides on the impeller side. The two polished faces running against each other are the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNever touch the black carbon face. The easiest way to seat the cup half is a 1 in. coupling, which presses on the cup and lets the seal go into the housing square without contacting the face.\u003c\/p\u003e","brand":"US Seal","offers":[{"title":"Default Title","offer_id":48624927244500,"sku":"USS-60-5023","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_70d53be0-89fc-493f-ba15-101131be6d70.jpg?v=1788654737"},{"product_id":"challenger-pump-strainer-pot","title":"Pentair Challenger Pump Strainer Pot","description":"\u003cp\u003eThe Pentair 355300 is the strainer pot, the front housing, for Challenger high head and high flow pool pumps. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe strainer pot takes the brunt of sun, chemicals and the occasional dropped lid. A crack or a warped sealing surface lets air into the suction side, which shows up as bubbles in the pot, a pump that loses prime or a noisy motor. Replacing the pot puts a fresh sealing surface under the lid and o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing only. The strainer lid and the 5-3\/4 in. ID lid o-ring are separate parts, and it is worth ordering a new o-ring with the pot if the old one has flattened.\u003c\/p\u003e\u003cp\u003eFour photos show the pot from several angles so you can compare it with the housing on your pump before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624928293076,"sku":"PAC-101-3123","price":141.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_75bd93b6-3332-4b0d-8e47-38c63d033c29.png?v=1788654858"},{"product_id":"1hp-pool-motor-2-speed-energy-effiecient-full-rate-230v","title":"Century 1 HP Pool Motor, 2 Speed, Energy Efficient Full Rate, 230V","description":"\u003cp\u003eThe Century B2982 is a two speed, full rated 1 HP pool and spa pump motor for 230 V service, built on the Y56Y frame with a threaded shaft. It is the replacement motor for Pentair Challenger, SuperFlo and WhisperFlo pumps that run two speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, one motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh speed is 3450 rpm for vacuuming, running a heater or clearing the pool after a storm. Low speed is 1725 rpm for everyday turnover, where the motor draws a fraction of the current (1.4 A against 7.4 A at service factor). Nameplate output is 1.0 HP on high with a 1.65 service factor, 0.75 kW, 60 Hz single phase. The electrical design is PSC on low speed and cap start, cap run on high, started across the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSealed ball bearings at both ends, a 303 stainless steel shaft with a 1\/2 in. thread and 0.625 in. diameter, and a rolled steel open drip proof frame. It is thermally protected, Class F insulated, rated for continuous duty at 50 C ambient, UL recognized and CSA certified. Overall length is 13.40 in. with a 9.00 in. frame; rotation is counterclockwise from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis motor is not California Title 20 compliant and cannot be sold or installed in California. Century's V-Green EVO variable speed motors (EVC130, EVC165, EVC225, EVQ130, EVQ165, EVQ225) meet the CEC standard and are the route for California pools.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48624928620756,"sku":"MGT-60-2982","price":432.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_45905ebe-934b-46db-b99e-d209a9f02fad.jpg?v=1788654893"},{"product_id":"5hp-3hp-diffuser-w-o-ring-and-hardware","title":"Jandy 0.5 HP to 3 HP Diffuser with O-Ring and Hardware","description":"\u003cp\u003eThe Jandy R0445400 is the genuine diffuser for Jandy's 0.5 through 3 HP pumps, supplied as a kit with the o-rings and hardware needed to fit it. One part number covers the Stealth SHPF and SHPM, PlusHP PHPF and PHPM, MaxHP MHPM, WaterFeature WFTR and the ePump JEP variable speed pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne diffuser, two screws, two washers and two o-rings. That is everything the diffuser needs to go back onto the pump with fresh seals, so there is no second order for the small parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser sits over the impeller and shapes the flow into the volute. A cracked or worn diffuser costs the pump flow and can make it noisy or slow to prime. If the pump is already open for an impeller or shaft seal, it is the right time to fit a new diffuser as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the pump is one of the listed Jandy families and rated between 0.5 and 3 HP. The horsepower range is broad on this part, so the family match is what matters.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48624928653524,"sku":"TLD-101-2006","price":58.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8fb341b2-a62b-442f-8111-655a86a7d202.jpg?v=1788654897"},{"product_id":"motor-vfd-3-2kw-intelliflo","title":"Pentair VFD Motor Kit 3.2 kW PMSM, Almond","description":"\u003cp\u003eThe Pentair 350105S is the replacement motor kit for the IntelliFlo VF, VS 3050 and VS+SVRS inground pool and spa pumps: a 3.2 kW permanent magnet synchronous motor (PMSM) in the almond finish, made for the pumps Pentair built before August 2015.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor is the part that turns the drive's electrical output into the shaft power that spins the impeller. On an IntelliFlo that is a PMSM, a permanent magnet motor whose speed tracks the frequency from the variable frequency drive, which is what lets the pump hold whatever rpm you program. This kit is the motor; the drive and keypad are a separate assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the manufacture date on the pump label. The 350105S is for IntelliFlo pumps dated before August 2015. Confirm the model is a VF, VS 3050 or VS+SVRS, and note the almond color if matching the housing matters to you.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624928817364,"sku":"PAC-101-5293","price":731.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8dbde5a0-4424-4aa6-81a3-193094af4787.gif?v=1788654913"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/pool-pump-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}