{"title":"PoolStyle Parts","description":"\u003cp\u003ePoolStyle parts at Active Pool Supply, genuine OEM and quality aftermarket.\u003c\/p\u003e","products":[{"product_id":"skimmer-basket-ps016b","title":"Poolstyle Above Ground Pool Skimmer Basket, PS016B","description":"\u003cp\u003eThe Poolstyle PS016B is a replacement skimmer basket for above ground pools. It measures 6-1\/2 inches across the top outside diameter, 3-7\/8 inches across the bottom outside diameter, and 2-7\/8 inches tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer baskets are not interchangeable by eye. The basket tapers from top to bottom, so the throat diameter, the base diameter and the depth all have to line up with your skimmer body. Measure all three before ordering rather than matching on appearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe skimmer basket is the first thing standing between fallen leaves and the pump. Once it cracks or the rim breaks, debris passes straight through to the pump strainer and the flow drops off. A basket is inexpensive next to a pump repair, so it is worth replacing at the first split.\u003c\/p\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48627951599828,"sku":"PSL-251-1009","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f88df9eb-aa0e-43d9-bd6e-6c8f9e2acfb5.jpg?v=1788730771"},{"product_id":"60-sq-ft-filter-grid-each-large-1","title":"SuperPro 60 Sq. Ft. Filter Grid Each, Large, FC-9350","description":"\u003cp\u003eThe SuperPro FC-9350 is the full size vertical DE filter grid for 60 sq ft filters, measuring 11 inches by 30 inches. It is sold individually, and a complete set calls for seven of these full grids.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the grid does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA DE filter works by holding a coat of diatomaceous earth on the fabric of the grids. That powder layer is what actually filters the water, down to a far finer particle than sand or a cartridge will catch. The grid itself is only the frame and fabric that holds the coat in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOnce the fabric tears, thins, or hardens with age, the DE coat cannot hold. The symptom owners notice is powder blowing back into the pool through the returns after recharging, and water that never quite clears. Pull the grid pack and inspect every element; a tear at a seam or along the top edge is easy to miss.\u003c\/p\u003e\u003cp\u003eGrids are sold one at a time so a single failure does not mean a full set. That said, if several elements have aged together, replacing the whole pack usually restores filtration better than patching in one new grid among old ones.\u003c\/p\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48629533311188,"sku":"SPG-051-0113","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1ffece46-10ee-4b40-a092-932d778fa576.jpg?v=1788766083"},{"product_id":"60-sq-ft-filter-grid-each-small","title":"SuperPro 60 Sq. Ft. Filter Grid Each, Small, FC-9450","description":"\u003cp\u003eThe SuperPro FC-9450 is the partial size vertical DE filter grid for 60 sq ft filters, measuring 9-3\/4 inches by 30 inches. It is sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a set has a narrow grid in it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDE grid packs are built from full width elements plus one narrower partial grid. The partial is what lets the pack close up neatly inside a round tank. It is the same 30 inch height as the full grids but narrower, and the two are not interchangeable, so ordering the wrong one leaves you with a pack that will not seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe grid fabric is what holds the DE coat that does the actual filtering. When it tears, thins or goes hard with age, the coat cannot hold and powder blows back through the returns after a recharge while the water stays cloudy.\u003c\/p\u003e\u003cp\u003eTake the pack out and inspect every element rather than assuming the visible one is the only failure. Seams and top edges are where tears usually start.\u003c\/p\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48629533343956,"sku":"SPG-051-0123","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d6b41304-530c-45e8-8ad4-75029748954c.jpg?v=1788766087"},{"product_id":"2x50-backwash-hose","title":"PoolStyle 2 in x 50 ft Backwash Hose, QT-0317-02","description":"\u003cp\u003eThis is a 2 inch by 50 foot backwash hose from PoolStyle, part number QT-0317-02, supplied shrinkwrapped. The source also references it as PS586.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the length matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBackwash water has to go somewhere other than back into the yard around the equipment pad. Fifty feet is enough to reach a drain, a slope or a spot where the discharge will not undercut the pad or flood a bed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandling and storage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA backwash hose lays flat when it is empty, which is the main advantage over rigid pipe: it rolls into a compact coil and takes little room in the shed. Walk it out to drain the last of the water before you roll it up, especially heading into winter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the waste port on your filter valve. Two inch is the common size but not the only one, and the hose has to match the port rather than the filter.\u003c\/p\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48633372016852,"sku":"PSL-40-2109","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ce5607ca-5828-4b8c-84d3-68b1a28ef35e.png?v=1788798700"},{"product_id":"2-x-200-backwash-hose","title":"SuperPro 2\" x 200' Backwash Hose, Service Grade, 2160WBUSD200","description":"\u003cp\u003eThis is SuperPro service grade backwash hose, 2 inches in diameter and 200 feet long, supplied as a single bulk roll.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBulk length, cut to suit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo hundred feet is a working roll rather than a finished hose. Service companies cut it into the lengths their pools need, which is usually a mix: a short run to a nearby drain on one property and a much longer one to reach the street on another. Buying the roll costs less per foot than buying made up lengths and means you are never short by ten feet on a Friday afternoon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCollapsible construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hose lies flat when it is empty and opens out when water pressure hits it. That is the whole reason a 200 ft length is practical to carry and store. Roll it up wet and it goes back into a manageable coil instead of a truck bed full of rigid hose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy service grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eService grade is the heavier specification. The failure point on cheap backwash hose is the fold line, where repeated rolling and unrolling eventually splits the wall. A heavier grade takes that cycle for far longer, which is what matters when the hose is being deployed and rolled several times a day.\u003c\/p\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48633765003476,"sku":"SPG-40-1115","price":177.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a906a7d3-9576-4aa0-99d2-a4d5f9c61ff4.jpg?v=1788814738"},{"product_id":"leaf-vacuum-bag","title":"Poolmaster Leaf Vacuum Bag, PS454","description":"\u003cp\u003eThe Poolmaster PS454 is a replacement bag for a leaf vacuum. It catches leaves, acorns and other debris as water passes through the vacuum head, so the load never reaches the skimmer basket or the pump pot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made for most standard size leaf vacuums and measures 1\" X 7 1\/2\" X 6\". If your vacuum head is an unusual size, compare its collar against the bag opening before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBags wear from the inside as grit scours the mesh. A torn seam or a hole lets everything you just collected wash back into the pool, and a bag that has gone stiff and will not open fully chokes flow through the head, which makes the vacuum feel weak even though nothing else has changed.\u003c\/p\u003e\u003cp\u003eKeeping a spare on hand pays for itself in fall, when one storm can fill and split a tired bag in a single session.\u003c\/p\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48633769263316,"sku":"PSL-401-1053","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3e00cb78-c340-4516-a234-c073dbfc03ae.jpg?v=1788815038"},{"product_id":"2-x-50-deluxe-backwash-hose","title":"SuperPro 2\" x 50' Deluxe Backwash Hose, 2160WBUSD050","description":"\u003cp\u003eThe SuperPro 2160WBUSD050 is a deluxe backwash hose, 50 feet long and 2 inches in diameter, in a service grade build.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a sand or D.E. filter is backwashed, the dirty water has to go somewhere other than back into the pool. This hose carries it from the valve outlet to wherever you are allowed to discharge it. Fifty feet is enough to clear the equipment pad and the surrounding landscaping on most properties.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSlide the hose over the 2 inch backwash outlet and clamp it in place before opening the valve, since backwash flow will push an unclamped hose off. Roll the hose out straight so it does not kink, and let it drain before rolling it back up. Where backwash water can legally be discharged varies by area, so check the local requirement before you point it at a drain or the street.\u003c\/p\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48634472235220,"sku":"SPG-40-1114","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2553a733-96c0-4ea5-bb13-6e0cf6f7f6aa.jpg?v=1788831780"},{"product_id":"pool-cleaner-hose-section-light-gray-4-ea","title":"Poolstyle Pool Cleaner Hose Section, Light Gray 4' Each, PA01062-HSCS4","description":"\u003cp\u003eThis is a single 4 foot section of universal pool cleaner vacuum hose in light gray, Poolstyle part PA01062-HSCS4, also referenced as PS482.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits together\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hose uses the common cleaner size: a 1.5 inch inside diameter female end and a 1.5 inch outside diameter male end. Sections push together to make up whatever total length the pool needs, so one replacement length can go into an existing set. It is stocked as the hose section for suction cleaner families including Hayward Navigator and Pool Vac, and Arneson Aquabug and Aquadroid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace a section\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCleaner hose fails one length at a time. A section that has split, gone brittle at an end or collapsed under suction upsets the whole cleaner's pattern, and replacing that single piece is far cheaper than a new hose set. Since these are sold each, buy only the number you actually need.\u003c\/p\u003e","brand":"Poolstyle","offers":[{"title":"Default Title","offer_id":48634932953300,"sku":"PSL-201-7002","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_703a32fe-1e47-41be-ab4c-8b8404168863.jpg?v=1788838958"},{"product_id":"poolstyle-ps783-deluxe-vacuum-hose-1-5-x-40-bo520112040pco","title":"PoolStyle Deluxe Vacuum Hose 1.5in by 40Ft | BO520112040PCO","description":"PoolStyle 40' Deluxe PS783 vacuum hose with a 1-1\/2\" wide cuff to allow maximum suction.\u003cbr\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48648816689364,"sku":"PSU-79304","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/79304_1_201113131934.jpg?v=1789059324"},{"product_id":"standard-vac-handle","title":"PoolStyle Standard ABS Vacuum Handle with Pin, PS047","description":"\u003cp\u003eThe PoolStyle PS047 is a standard ABS vacuum handle with a pin, used to attach a manual vacuum head.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe PS047 is a standard vacuum handle molded from ABS plastic and supplied with a mounting pin. It is used to attach a vacuum head to a pool pole for manual vacuuming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis handle is sold on its own and does not include the pole or vacuum head. Confirm the handle style against your existing vacuum head before ordering a replacement.\u003c\/p\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48694146990292,"sku":"PSL-401-1005","price":10.86,"currency_code":"USD","in_stock":false}]},{"product_id":"cable-precut-100-lengths","title":"Cypress Precut Steel Cable for Winter Pool Covers, 100 ft, CAB6503","description":"\u003cp\u003eThe Cypress CAB6503 is a 100 ft length of steel cable, precut and ready to install for tensioning a winter pool cover.\u003c\/p\u003e\u003cp\u003eCable and winch hardware is used to pull a winter cover snug around the perimeter of a pool, and having the cable precut to length saves cutting and measuring at install.\u003c\/p\u003e\u003cp\u003eThe CAB6503 is sold individually.\u003c\/p\u003e","brand":"PoolStyle","offers":[{"title":"Default Title","offer_id":48694173499604,"sku":"GPC-701-6503","price":20.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c18a78f5-522b-422d-b2e4-f4c5eedd211e.jpg?v=1789765727"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/poolstyle-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}