{"title":"Praher Parts","description":"\u003cp\u003ePraher parts at Active Pool Supply, genuine OEM and quality aftermarket.\u003c\/p\u003e","products":[{"product_id":"valve-2-multiport-kit","title":"Praher Valve, 2\" Multiport Kit, SM2-PP3","description":"\u003cp\u003eThis is the 2 inch multiport valve kit, part SM2-PP3, for Pac-Fab Triton sand filter tanks. It covers TR 100, TR 140, TR 100HD, TR 100C and TR 140C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a multiport does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe multiport is the valve that gives a sand filter its modes. One handle position sends water through the sand to filter, another reverses it to backwash, another rinses the bed after a backwash, and the rest cover waste, recirculate and closed. All of that comes from a rotor turning inside a single valve body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen the whole valve is the answer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMultiports wear from the inside. Once the sealing surface is worn or the body is cracked, water passes between ports whatever the handle is set to, and the usual sign is water running to waste while the filter is supposedly filtering. That is the point where the valve gets replaced instead of rebuilt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 2 inch valve. Side mount sand filters are also built with 1-1\/2 inch ports, so confirm the port size on your tank before ordering.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48626111414484,"sku":"PRA-06-204","price":326.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_57de20f5-4db7-4627-b4c5-3bac5923163e.png?v=1788704962"},{"product_id":"key-hub-assembly-2-white","title":"Praher Key Hub Assembly 2\" White, E-50-S2","description":"\u003cp\u003eThe Praher E-50-S2 is a key hub assembly for 2 inch filter valves, supplied in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe key hub is the internal hub the valve key turns on. It is one of the wearing parts inside a multiport valve, and renewing it is the alternative to replacing a valve that is glued into the plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe available information on this part is limited to the Praher part number, the 2 inch size and the white finish. Check E-50-S2 against your own valve parts breakdown to confirm it is the right hub for your valve.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48626211324116,"sku":"PRA-061-1001","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cb3e1047-2ca1-48b1-b3c5-d8cbdf41e818.png?v=1788706176"},{"product_id":"praher-tm-22-pb-abs-clamp-down-top-mount-multiport-valve-for-sand-or-de-filter-2-inch-8-22-inch-clamp-flange","title":"Praher 2\" ABS Clamp-Down Top Mount Multiport Valve for Sand or DE Filter, TM-22-PB","description":"\u003cp\u003eThe Praher TM-22-PB is a top mount multiport valve in ABS, built for sand and DE filters that use a clamp-down connection. It runs 2 inch plumbing and seats on an 8.22 inch clamp flange.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClamp-down versus threaded\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClamp-down valves sit on a flanged tank neck and are held by a clamp ring rather than threading in. There is nothing to cross thread and the valve comes off in one piece when the tank needs opening, which is why the style is common on tanks that get serviced often. The trade off is that the flange diameter has to match exactly, so the 8.22 inch figure is the number to check against your filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe multiport is what sets the filter to filter, backwash, rinse, recirculate, waste or closed. Owners usually replace one when the internal spider gasket has been changed once too often, when the valve body itself is cracked, or when water crosses between ports no matter what position the handle is in.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48626585141460,"sku":"PRA-061-9836","price":173.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e827f577-1c65-4950-95d5-df623a957715.jpg?v=1788712734"},{"product_id":"1-1-2-6-way-multiport-valve","title":"Praher 1-1\/2\" 6-Way Multiport Valve, TM-12-L","description":"\u003cp\u003eThe Praher TM-12-L is a 1-1\/2 inch six way multiport valve. It is the backwash valve for the Sta-Rite Cristal-Flo sand filter, and it turns up on a long list of other filters besides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything a sand filter can do, it does through the multiport. The handle picks the port position and the valve sends water where that position calls for. When the internals wear, water starts passing between positions instead of following the one you selected, and the usual symptom is dirty water going back to the pool during a backwash.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBeyond the Sta-Rite Cristal-Flo, the same valve is used on the Baker Hydro III, Cooper and Millenium sand filter, the W Cooper Ranger RS Series sand filters, the Waterway Smartclean sand filter and the Speck Aquaswim AS-250. Match the valve size at your filter first: this is the 1-1\/2 inch version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clamp assembly and its o-ring are a separate Praher part. If the old clamp has been on the filter for years it is worth replacing at the same time, since it is the piece holding the new valve to the tank.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48628758020308,"sku":"PRA-06-212","price":136.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_566010df-7327-4347-b0c8-37726cb20c6c.jpg?v=1788749808"},{"product_id":"1-1-2-sxs-union","title":"Praher 1-1\/2\" Slip by Slip Union, 150-100","description":"\u003cp\u003eThe Praher 150-100 is a 1-1\/2 inch union with slip sockets on both ends, in white, rated to 50 PSI.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a union buys you\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery piece of equipment on the pad eventually has to come out. A union in the pipe on each side means that is a matter of loosening a collar, not cutting and regluing plumbing. Fitting them at the pump, the filter and the heater turns a half day job into a short one, and it pays for itself the first time something needs service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth ends are sockets, so the union glues directly onto 1-1\/2 inch pipe. Take note of the 50 PSI rating and confirm where you are putting it: normal residential circulation is comfortably inside that, but a system running high head pressure deserves a second look before this goes on the pressure side.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48629098578132,"sku":"PRA-56-4004","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/150-100.jpg?v=1788759659"},{"product_id":"valve-tm-clamp-2-sta","title":"Waterway 2\" Top Mount Valve Clamp TM-22-L","description":"\u003cp\u003eThe Waterway TM-22-L is the clamp for the 2 inch top mount sand filter valve. Waterway catalogues it as a filter valves part, so this listing is the clamp on its own and not a complete valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it holds together\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a top mount filter, the valve sits down onto the tank flange and the clamp pulls the two together. Everything downstream of that joint depends on the clamp staying sound. A clamp that is cracked, distorted or corroded will not hold the valve square on the flange, and no amount of retightening fixes it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part is listed against the Waterway 2 inch top mount Smart Clean sand filter valve. Confirm your valve is the 2 inch top mount version, since side mount valves and other sizes use different clamps.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48633455739092,"sku":"PRA-06-210","price":171.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c650669b-7262-42ea-9026-81ad0f808e2e.jpg?v=1788805000"},{"product_id":"2-sxmip-union","title":"Praher 2\" Slip x MIP Union, 200-903","description":"\u003cp\u003eThe Praher 200-903 is a two inch union with a slip socket on one side and a male pipe thread on the other. It is the joint you put in a plumbing run when you want to be able to take it apart later.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it goes in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe slip end solvent welds onto 2 in PVC pipe. The male threaded end screws into a female port, which is how most pumps, filters and heaters present their inlets and outlets. Threaded plastic wants sealant rather than force, so tape the thread and stop when it is snug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it earns its place\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnything on the equipment pad eventually comes off for service or replacement. With a union at the connection that is a two minute job. Without one it means a saw, fresh pipe and a wait for the cement to cure.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48633709166804,"sku":"PRA-56-4035","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/200-903.jpg?v=1788812252"},{"product_id":"2-spider-gasket","title":"Pentair 2\" Spider Gasket, E-12-S2","description":"\u003cp\u003eThe Pentair E-12-S2 is the spider gasket for 2 in multiport valves. It is the rubber seal that sits inside the valve body and divides the ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA multiport valve works by rotating a key against this gasket. The arms of the gasket seal off the ports you are not using, which is how one handle can mean filter, backwash, rinse, waste, recirculate or closed. There is nothing else in the valve doing that job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow you know it is worn\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe symptom almost everyone meets first is water running out of the waste line while the handle is set to filter, or the pool level dropping for no visible reason. That is the gasket failing to seal one port from the next. Rubber under constant compression takes a set with time, so this is a wear part rather than a fault.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpider gaskets are specific to the valve body. This one is carried with the 6-position top mount valve parts for 1-1\/2 in and 2 in multiport models 501131, 501130 and 501231, and is also listed with 2 in BWVL-MPV DE and sand side valve parts. Confirm your valve and port size before ordering.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48633989333204,"sku":"PRA-061-1003","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a9703fc9-c84d-409a-9bee-48677de75c2f.jpg?v=1788823446"},{"product_id":"key-cover-assembly-1-1-2-white","title":"Praher Key Cover Assembly 1-1\/2 Inch, White, E-50-S1","description":"\u003cp\u003eThe Praher E-50-S1 is a 1-1\/2 inch key cover assembly in white, sold as an aftermarket replacement for the Pentair key cover assembly used on SM-10-2 and SM-10-3 valves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe key cover is the top plate of a multiport valve: it holds the handle, carries the port label, and keeps the diverter loaded correctly against the valve seat. A cracked cover, a stripped handle mount or a label worn illegible are all reasons to replace it, and the assembly is a cheaper repair than a whole valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo things to know before ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFirst, the label fitted to this cover is the sand filter version. If your valve is on a DE filter the cover itself fits and operates correctly, but the printed positions read in reverse, so set the valve by what it is doing rather than by the label. Second, the source notes that color may vary and that stock is sometimes supplied in black, so the white finish is not guaranteed.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48634267959508,"sku":"PRA-061-1000","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dbab3123-05cd-4a07-ac7c-75b6149180f0.jpg?v=1788827945"},{"product_id":"12l-clp-clamp-assembly-with-o-ring","title":"Pentair 12L-CLP Clamp Assembly with O-ring","description":"\u003cp\u003eThe 12L-CLP is a clamp assembly supplied with its o-ring, listed among Sta-Rite filter valve parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA clamped joint on a filter valve holds two halves together against system pressure, and the o-ring inside it does the actual sealing. Over years of seasonal tightening the clamp stretches and the o-ring flattens, and a joint that used to seal at hand tight starts weeping no matter how hard it is pulled up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompare the 12L-CLP number to the clamp on your own valve. Clamp assemblies look similar across a lot of equipment and do not interchange freely, so the part number is the reliable check rather than the shape.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48634608058580,"sku":"PRA-06-CLP","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d43c7275-839b-4541-8653-84b6ff328953.jpg?v=1788835369"},{"product_id":"2-sxs-union","title":"Praher 2\" S x S Union, 200-100","description":"\u003cp\u003eThe Praher 200-100 is a 2 inch PVC union with a socket on each end, made for pool and spa plumbing. It solvent welds into a 2 inch line the same way any slip fitting does, and from then on that joint can be opened by hand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePool equipment gets pulled. Pumps get rebuilt, filters get replaced, heaters get swapped. Every one of those jobs is quick if there is a union either side of the equipment and slow if there is not, because the alternative is a saw, new fittings and a wait for the glue to cure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTake the union apart before you glue, prime and cement each half onto the pipe, then bring the two halves together and hand tighten the nut. The seal is made by the union nut and its o-ring, not by overtightening, so leave the wrench alone.\u003c\/p\u003e\u003cp\u003ePraher Plastics Canada builds this fitting, and it is a straightforward replacement wherever a 2 inch slip by slip union is called for.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48634609205460,"sku":"PRA-56-4012","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_77a62be0-edc4-4170-b198-b6baac4b886f.jpg?v=1788835387"},{"product_id":"valve-tm-clamp-1-5-pac","title":"Praher ABS Clamp-Down Top Mount Multiport Valve for 1-1\/2 in. Triton Filters, TM-12-CFC","description":"\u003cp\u003eThe Praher TM-12-CFC is a clamp-down, top mount multiport valve built for 1-1\/2 inch plumbing on Pentair Triton filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA multiport valve sits above the filter tank and redirects water through the filter positions used during normal operation and maintenance: filter, backwash, rinse, waste, recirculate, and closed. Moving the handle changes the flow path without disturbing the plumbing underneath. The TM-12-CFC uses a clamp-down design that locks the valve body to the tank flange, and it is molded from ABS plastic for resistance to pool chemicals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis valve is built for 1-1\/2 inch filter plumbing and is made to fit Pentair Triton filters. Multiport valves vary by clamp style, plumbing size, and mounting pattern between filter families, so match the existing valve to the filter model or the part number before ordering a replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe TM-12-CFC is sold as a complete valve assembly rather than as individual internal parts. Confirm the part number against the old valve before ordering.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48694043148500,"sku":"PRA-06-201","price":111.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_610502f2-03c5-4598-8e36-146bcdd87ee5.png?v=1789765578"},{"product_id":"praher-sm1-hp2-abs-pre-plumbed-side-mount-multiport-valve-for-de-filter-1-1-2-inch-fip","title":"Praher ABS Pre-Plumbed Side Mount Multiport Valve for DE Filters, 1-1\/2 in. FIP, SM1-HP2","description":"\u003cp\u003eThe Praher SM1-HP2 is a pre-plumbed side mount multiport valve built for DE filters, connecting with 1-1\/2 inch FIP plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA side mount multiport valve controls the position of water flow into and out of a DE filter tank, switching among filter, backwash, rinse, waste, and closed positions from a single handle. The SM1-HP2 is pre-plumbed and mounts on the side of the filter tank rather than the top.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve connects with 1-1\/2 inch FIP plumbing on a 5 inch center dimension and includes a molded 90 degree sweep for flow. Confirm the connection size and center dimension against the existing valve before ordering, since side mount valves are not interchangeable across filter models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SM1-HP2 is sold as a complete ABS side mount valve assembly, not as individual internal parts.\u003c\/p\u003e","brand":"Praher","offers":[{"title":"Default Title","offer_id":48694091382996,"sku":"PRA-06-219","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_34875084-7063-4f9e-9a8d-16cc6e58b497.jpg?v=1789765585"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/praher-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}