{"title":"Raypak Heat Pump Parts","description":"\u003cp\u003eReplacement parts for Raypak Heat Pump, genuine OEM and compatible aftermarket.\u003c\/p\u003e","products":[{"product_id":"raypak-100-10000347-heat-pump-digital-control-board-9350-9353-5450-8450","title":"Raypak Heat Pump Digital Control Board 9350\/9353 5450-8450, 100-10000347","description":"\u003cp\u003eThe Raypak 100-10000347 is the digital control board for the 9350\/9353 control series used on Raypak 5450, 6450, 8450 and 8350 heat pumps. It is the genuine Raypak part.\u003c\/p\u003e\u003cp\u003eRaypak has superseded the older part number H000302 with 100-10000347. If the board you are replacing is marked H000302, this is the correct replacement.\u003c\/p\u003e\u003cp\u003eTemperature sensors are separate parts. If your diagnosis points at a sensor rather than the board, Raypak offers a 100K temp sensor kit and an ambient temp sensor kit for the same series.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624545792212,"sku":"RAY-151-0049","price":296.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_30e185f6-a71c-4ef6-8b96-f2a2b7ef9e52.png?v=1788643179"},{"product_id":"raypak-018155f-water-unions-and-o-ring-for-crosswind-pool-heaters","title":"Raypak Water Unions and O-Ring for Crosswind Pool Heaters, 018155F","description":"\u003cp\u003eThe Raypak 018155F is the water union and o-ring pack for Crosswind pool and spa heaters. The unions are where the heater connects to the pool plumbing, and they allow the heater to be unhooked for service without cutting pipe. It is a genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCrosswind models I-30, I-40, I-50, I-65, O-40, O-50 and O-65. The Crosswind is an inverter driven heater that adjusts its output to hold the pool temperature, and these are the standard water connections for the line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA drip at the heater connection that a snug turn does not stop usually means the o-ring has flattened. If the union nut is cracked or its threads are worn, the union itself needs to go too. This pack covers both.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624881500372,"sku":"RAY-151-7690","price":151.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5b0cb4ea-283f-47e2-b0d4-ee8a3f8f5c1f.png?v=1788649333"},{"product_id":"raypak-h000329-100k-temp-sensor-kit-9350-9353-5450-8450","title":"Raypak 100K Temp Sensor Kit, 9350\/9353 and 5450-8450 Heat Pumps, H000329","description":"\u003cp\u003eThe Raypak H000329 is the 100K temperature sensor kit for the Raypak 9350, 9353, 5450, 6450 and 8450 heat pump pool heaters. It is the genuine Raypak part, supplied as a kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering the right sensor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese heat pumps use more than one sensor, and Raypak sells the ambient sensor kit and the coil sensor (H000334) separately. Match H000329 against your parts list or the old sensor before ordering. A sensor is usually the culprit when the display shows an impossible temperature, throws a sensor error, or the unit cannot settle on its set point.\u003c\/p\u003e\u003cp\u003eThe kit ships by parcel.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48624927604948,"sku":"RAY-151-9552","price":102.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_91c3c648-6a76-4574-81de-126a7d8be7b3.png?v=1788654773"},{"product_id":"raypak-018146f-water-flow-switch-for-crosswind-pool-heaters","title":"Raypak Water Flow Switch for Crosswind Pool Heaters, 018146F","description":"\u003cp\u003eThe Raypak 018146F is the water flow switch for Crosswind pool and spa heaters. It is a genuine Raypak product and fits Crosswind models I-30, I-40, I-50, I-65, O-40, O-50 and O-65.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe flow switch is a safety interlock. It has to see water moving through the heater before the control will let the unit run. That protects the heat exchanger from firing against still water, and it is why a heater with a failed switch simply refuses to start.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiagnosing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA no flow message with the pump running points at low flow first: a dirty filter, a partly closed valve, a low water level or a blocked impeller. If the plumbing checks out and flow is good, the switch has failed and a new one puts the heater back in service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout the Crosswind\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Crosswind is built around inverter technology that adjusts continuously to hold pool temperature, which is what makes it quiet and efficient. That control depends on knowing water is moving, so the flow switch is not an optional part of the system.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48625710366932,"sku":"RAY-151-7681","price":135.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8df76660-ac52-459d-88e7-b35d6259b16f.png?v=1788688866"},{"product_id":"raypak-h000332-ambient-temp-sensor-kit-9350-9353-5450-8450","title":"Raypak H000332 Ambient Temp Sensor Kit 9350\/9353 5450-8450","description":"\u003cp\u003eThe Raypak H000332 is the ambient temperature sensor kit for the 9350, 9353, 5450, 6450 and 8450 heat pump pool heaters. It is the genuine Raypak service part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the ambient sensor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA heat pump pulls warmth out of the outside air, so it has to know how cold that air is. The ambient sensor supplies that reading. When it drifts or fails, the unit works from bad information and behavior around startup, defrost and shutdown stops making sense.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSupplied as a kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak sells this as a kit rather than a bare sensor, so the parts needed for the change arrive together. The components are built for outdoor service on pool equipment.\u003c\/p\u003e\u003cp\u003eCheck which sensor your heater is calling out before ordering. The coil temperature sensor and the 100K temp sensor kit are separate Raypak parts for the same heat pump range.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48625746313428,"sku":"RAY-151-9550","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6068a9a7-c993-4066-b287-7b9daf5b6874.png?v=1788690908"},{"product_id":"raypak-h000025-water-pressure-switch","title":"Raypak Water Pressure Switch for Model 5100, 6100, 5100ti Pool Heater, H000025","description":"\u003cp\u003eThe Raypak H000025 is the water pressure switch for the Model 5100, 6100 and 5100ti. It is the genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pressure switch is a safety interlock. It watches the water side of the unit and closes when there is pressure, which is the control system permission to run. Without that signal the unit stays off, which is exactly what you want when the pump is not moving water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiagnosing a no heat call\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA unit that will not start and reports a flow problem is not always a bad switch. Start with the obvious water side causes: a loaded filter, a closed or partly closed valve, a clogged pump basket, air in the system. If the water is moving properly and the switch still never closes, the switch itself has failed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a small electrical component, straightforward for a service technician to change. Kill power to the unit before touching it and note the wiring before removing the old switch.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48625762926804,"sku":"RAY-151-3632","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8d06d7b3-11f9-4c27-8d85-a77ebdcc7672.jpg?v=1788691990"},{"product_id":"temperature-sensor-for-model-r5350-r6350-r8350-pool-heater-10-kohm","title":"Raypak Temperature Sensor for R5350, R6350 and R8350 Pool Heaters, 10 kohm, H000002","description":"\u003cp\u003eThe Raypak H000002 is the 10 kohm temperature sensor for the R5350, R6350 and R8350 pool heaters. It is the genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe heater reads water temperature from this sensor and uses it to hold the set point and to enforce its limits. Everything the control does about temperature rests on what the sensor reports, which is why a failing one produces symptoms that look far more serious than they are.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiagnosing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA reading that never changes, jumps around, or sits well away from a thermometer in the water usually means the sensor. Check it before condemning the control board, since a sensor is a fraction of the cost and a much simpler job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOrder by model and by rating. This is the 10 kohm version for the R5350, R6350 and R8350, and a sensor built to a different resistance curve will report the wrong temperature even when it plugs straight in.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48625796022484,"sku":"RAY-151-3630","price":70.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_04246a85-6835-43ca-aa77-8f4c516d7b47.jpg?v=1788700277"},{"product_id":"raypak-100-10000816-water-bypass-for-crosswind-v-heat-pump","title":"Raypak 100-10000816 Water Bypass for Crosswind V Heat Pump","description":"\u003cp\u003eThe Raypak 100-10000816 is the genuine water bypass for the Crosswind V pool heat pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA heat pump needs the right amount of water moving through its heat exchanger. Send everything through and the system flow drops; send too little and the water leaves barely warmer than it went in. The bypass splits the incoming flow so part of it passes through the exchanger and the rest goes around, which is what lets a single pump serve both the filter loop and the heater properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is the problem\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLook at the bypass when the unit runs but never reaches temperature, when the pressure drop across the heater has changed noticeably, or when the housing itself is cracked or weeping. Adjustment that will not hold is another sign the internals have gone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the model is a Crosswind V. Raypak lists this part for that unit specifically.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48626307170516,"sku":"RAY-151-0241","price":258.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_52bd625c-bf73-47d1-8715-5691700579e5.png?v=1788707996"},{"product_id":"5450-6450-8450-heat-pump-switch-decal-membrane","title":"Raypak 5450\/6450\/8450 Heat Pump Switch Decal Membrane, H000326","description":"\u003cp\u003eThe Raypak H000326 is the switch decal membrane for the 5450, 6450 and 8450 heat pumps. It is the genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe membrane is the printed layer over the switches. It carries the legends you read and the surface you press, and it takes the weather on an outdoor unit year after year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplace it when the printing has faded past reading, when the edges lift, or when the surface has split. Order by part number H000326 so the legends and the layout match the unit you have.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48626503090388,"sku":"RAY-151-3735","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bf5a5902-c93f-4963-b9e1-8ab79f2d8879.png?v=1788711049"},{"product_id":"raypak-h000078-low-pressure-switch-for-5350-6350-8350-2350-3350-4350-heat-pump-pool-heater","title":"Raypak H000078 Low Pressure Switch for 2350, 3350, 4350, 5350, 6350 and 8350 Heat Pumps","description":"\u003cp\u003eThe Raypak H000078 is the OEM low pressure switch for the 2350, 3350, 4350, 5350, 6350 and 8350 heat pump pool heaters. It is a small part with an outsized job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it protects\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA heat pump moves heat with a refrigerant circuit, and running the compressor with too little suction pressure damages it. The low pressure switch sits on that side of the circuit and opens the control path before the pressure gets there, shutting the unit down instead of letting it grind on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRepeated low pressure lockouts are the usual reason people arrive at this part. The switch itself can fail and report a fault that is not real. Before you swap it, it is worth having the actual refrigerant pressures read, because a true low charge is a leak that needs finding, not a switch.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48626966069460,"sku":"RAY-151-8161","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c4c5de1c-17bb-4e88-837b-8c5b6495d5ff.jpg?v=1788718588"},{"product_id":"raypak-h000077-tx-valve-for-r8350-p8350-heat-pump-pool-heater-12-ton","title":"Raypak 12 Ton TX Valve for R8350\/P8350 Heat Pump Pool Heater, H000077","description":"\u003cp\u003eThe Raypak H000077 is the 12 ton thermal expansion valve for the R8350 and P8350 heat pump pool heaters. It is the genuine Raypak part for that circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA heat pump moves heat out of the air and into the pool water. The expansion valve sits between the condenser and the evaporator and meters refrigerant into the coil at the rate the load calls for. Get that flow wrong and everything downstream suffers, because the compressor sees the wrong suction conditions and the coil cannot absorb heat properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a failed valve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe usual signs are a unit that runs for long stretches without warming the water, a coil that frosts over in mild weather, or suction pressures that will not settle. Those symptoms overlap with a low charge and with airflow problems, so the diagnosis should be confirmed on gauges before the valve is condemned.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplacement requires recovering the refrigerant, brazing the new valve in and recharging the system. It is a licensed technician job, not a pad side repair.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48627354697940,"sku":"RAY-151-8810","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_485522f1-794e-4a29-b30e-9d1948b37b85.png?v=1788722787"},{"product_id":"raypak-h000051-capacitor-for-8350-9350-9353-8320ti-heat-pump-pool-heater-3-phase-80-mfd-440-vac","title":"Raypak H000051 Capacitor for 8350\/9350\/9353\/8320ti Heat Pump Pool Heater, 3 Phase, 80 MFD, 440 VAC","description":"\u003cp\u003eThe Raypak H000051 is the genuine capacitor for the 8350, 9350, 9353 and 8320ti heat pump pool heaters, rated 80 MFD at 440 VAC and specified for three phase units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe capacitor stores and releases the energy the compressor motor needs to get moving and to keep running smoothly. It is a wear item: heat, hours and voltage swings degrade it long before the compressor or the coil reach the end of their lives. When it goes, the heat pump usually still has power and still calls for heat, but the compressor hums, draws hard, or refuses to start at all.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplace like for like. A capacitor with a different microfarad value or voltage rating will not run the motor properly and can shorten its life. Capacitors also hold a charge after the disconnect is pulled, so leave the swap to a qualified service technician.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48627946291412,"sku":"RAY-151-8072","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7b03027e-19bc-4d9b-8f71-e320f1ccf860.png?v=1788730544"},{"product_id":"raypak-h000127-capacitor-for-5350-6350-6200-heat-pump-pool-heater-3-phase-80-5-mfd-370-vac","title":"Raypak Capacitor for 5350\/6350\/6200 Heat Pump Pool Heater, 3 Phase, 80+5 MFD, 370 VAC, H000127","description":"\u003cp\u003eThe Raypak H000127 is the genuine replacement capacitor for the 5350, 6350 and 6200 heat pump pool heaters, rated 80+5 MFD at 370 VAC for the three phase configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the capacitor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA capacitor stores and releases the charge that gets a motor turning and keeps it running efficiently. The 80+5 MFD rating means this is a dual value can: the larger section serves one motor circuit and the smaller section another, so a single part covers both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptoms of a failure\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCapacitors fail with heat and age. The heat pump hums but the compressor or fan will not start, the unit trips out, or a fan turns only when it is given a push. A can that is bulged at the top or weeping is finished. Because the ratings have to match, check the 80+5 MFD and 370 VAC figures against the capacitor you are pulling out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA capacitor holds a charge after the power is off. Anyone opening the cabinet should be comfortable discharging it safely, or the job belongs with a service tech.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48627968573652,"sku":"RAY-151-8066","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_47f1464a-5159-43f0-b454-e66efcbcc22c.jpg?v=1788731943"},{"product_id":"raypak-h000043-50-amp-contactor-for-model-5100-6100-5100ti-pool-heaters","title":"Raypak 50 Amp Contactor for Model 5100, 6100, 5100Ti Pool Heaters, H000043","description":"\u003cp\u003eThe Raypak H000043 is the 50 amp contactor used in the model 5100, 6100 and 5100Ti pool heaters. It is the genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA contactor is a heavy duty relay. The control side of the unit sends a small signal to the contactor coil, the coil pulls a set of large contacts closed, and full line current flows through to the main load. Every heat cycle passes through those contacts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaking and breaking high current arcs the contact faces. Over years they pit, carbon up, and either stop conducting or, at the other extreme, weld themselves shut. A heater that will not start when it calls for heat, or one that will not stop when it should, points straight at the contactor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUse the right part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 50 amp rating is only part of the story. Coil voltage, terminal arrangement and mounting all have to match, which is why the Raypak part number is the sensible replacement rather than a generic contactor of the same amperage.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48627978830036,"sku":"RAY-151-1227","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_940feaf4-09b5-401a-962a-f2b3797e990d.jpg?v=1788732206"},{"product_id":"5450-6450-8450-heat-pump-transformer","title":"Raypak Heat Pump Transformer for 5450, 6450 and 8450, H000331","description":"\u003cp\u003eThe Raypak H000331 is the transformer for the 5450, 6450 and 8450 pool heat pumps. It is the genuine Raypak replacement part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe transformer steps line voltage down to the low voltage the control circuit runs on. Everything on the control side of the heat pump depends on it, so when it fails the unit can have power at the disconnect and still be completely dead at the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiagnosing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the heat pump shows no signs of life but line voltage is present, checking the transformer output is one of the first steps. Replace it with the OEM part so the secondary voltage matches what the rest of the control circuit expects.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48627983548628,"sku":"RAY-151-3737","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d1dee830-e52c-4e8b-abb1-434dfd7e5102.png?v=1788732392"},{"product_id":"raypak-h000173-tx-valve-for-r6350-r8350-p5350-p6350-p8350-heat-pump-pool-heater-8-ton","title":"Raypak 8 Ton TX Valve for Heat Pump Pool Heaters, H000173","description":"\u003cp\u003eThe Raypak H000173 is the 8 ton thermal expansion valve for Raypak heat pump pool heaters. It is the genuine Raypak part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the TX valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA heat pump moves heat from the air into the pool water, and the expansion valve is what meters refrigerant into the evaporator so that transfer can happen. Get that metering wrong and the symptoms look like a failing unit: weak heat rise, a coil that ices, or a machine that runs and runs while the water temperature barely moves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment and fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRaypak lists this valve for the R6350, R8350, P5350, P6350 and P8350. It is an 8 ton valve, so it has to be matched to the unit rather than assumed. Because it is inside the sealed refrigerant circuit, replacement is work for a technician equipped to recover and recharge refrigerant.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48629275263188,"sku":"RAY-151-8813","price":244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fa02c0f8-d574-428a-a078-c5abe23372fe.png?v=1788761825"},{"product_id":"raypak-h000299-dpst-fan-relay-for-2350-3350-4350-heat-pump-pool-heater","title":"Raypak H000299 DPST Fan Relay for 2350\/3350\/4350 Heat Pump Pool Heater","description":"\u003cp\u003eThe Raypak H000299 is the genuine DPST fan relay for the 2350, 3350 and 4350 heat pump pool heaters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA heat pump moves heat out of the air and into the pool water, and the fan is what keeps air flowing across the evaporator coil to make that possible. The fan relay is the switch that makes and breaks the fan motor circuit on command from the control. DPST means double pole single throw, so it switches two conductors together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRelay contacts carry the motor inrush every time the fan starts, and over the years they pit, stick or weld. The symptom is a unit that powers up and calls for heat while the fan hums, chatters or sits still, often followed by a high pressure trip because there is no airflow across the coil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the model number on the data plate is one of the 2350, 3350 or 4350, and check the fan motor and capacitor as well, since a seized motor will destroy a new relay the same way it destroyed the old one.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48633672237268,"sku":"RAY-151-8292","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_90257d0f-f072-493e-a8d5-02252f68bb52.png?v=1788808589"},{"product_id":"raypak-100-10000635-100k-inlet-temperature-sensor-for-crosswind-v-heat-pump","title":"Raypak 100K Inlet Temperature Sensor for Crosswind V Heat Pump, 100-10000635","description":"\u003cp\u003eRaypak 100-10000635 is the 100K inlet temperature sensor for the Crosswind V pool heat pump. It is the genuine Raypak part, matched to the resistance curve and connector the control board expects.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the inlet sensor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe heat pump decides what to do based on the water temperature coming in. That reading drives whether the unit calls for heat, how it stages, and what it puts on the display. The Crosswind V leans on that information heavily for its status reporting and diagnostics, so when the sensor drifts the unit does not simply run a little off, it starts reporting faults that have nothing to do with the real problem.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you swap it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the obvious things first. Confirm flow through the unit is good, the filter is clean and the plumbing is not restricted, since a starved heat pump produces temperature complaints of its own. If the reported inlet temperature does not agree with a thermometer in the water, replace the sensor.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48633707135188,"sku":"RAY-151-0228","price":117.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_40117632-885e-4ba6-ad56-458e8a43da8a.png?v=1788812202"},{"product_id":"raypak-rheem-ruud-heat-pump-fan-motor-guard-h000040","title":"Raypak Heat Pump Fan Motor Guard H000040","description":"\u003cp\u003eThe Raypak H000040 is the fan motor guard for the 5350, 6350 and 8350 heat pump pool heaters. The same units are sold under the Rheem and Ruud names, and the part is listed for those as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo jobs at once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe guard sits over the fan opening at the top of the heat pump cabinet. Its obvious job is safety: keeping hands away from a large blade turning at speed on a unit that lives out in the open next to a pool deck. Its less obvious job is protecting the fan, since a heat pump spends its life outdoors under whatever is above it. A dropped branch or a pool toy landing on an unguarded blade can bend it, and a fan that is even slightly out of balance starts working its motor bearings to death.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGuards get stepped on, crushed by covers, and corroded at the fixing points. If yours is bent into the fan path, badly rusted, or missing entirely, replace it rather than running the unit open. Airflow through the guard is part of how the heat pump is designed to breathe, so a flattened or blocked guard also costs you performance.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48633765036244,"sku":"RAY-151-8349","price":130.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bae3b001-9819-4429-abec-16fe6adcf789.png?v=1788814743"},{"product_id":"raypak-h000011-liquid-line-drier-for-5200-6200-8200-6300-heat-pump-pool-heater","title":"Raypak H000011 Liquid Line Drier for 5200\/6200\/8200\/6300 Heat Pump Pool Heater","description":"\u003cp\u003eThe Raypak H000011 is the liquid line drier for the Raypak 5200, 6200, 8200 and 6300 heat pump pool heaters. It is the genuine Raypak part for those units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the drier does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA heat pump moves heat by circulating refrigerant through a sealed loop. The drier sits in the liquid line and acts as the loop cleanup point, holding the moisture and fine debris that circulate after a repair or after a component failure. Left unchecked, that moisture reaches the metering device, freezes at the orifice and starves the evaporator, which shows up as poor heating and short cycling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFitting a drier means opening the sealed refrigerant circuit, which is EPA certified work. Have a qualified heat pump technician recover the charge, braze in the new drier, evacuate and recharge. Standard practice is to fit a fresh drier every time the circuit has been opened, so it is worth having this on hand before the service call.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48634024329428,"sku":"RAY-151-8268","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_733c32cd-c3cf-4dba-a7a9-dc2a1de80857.png?v=1788824940"},{"product_id":"raypak-h000317-9350-9353-10353-heat-pump-union-connector-kit","title":"Raypak Genuine OEM Heat Pump Union Connector Kit, H000317","description":"\u003cp\u003eThe Raypak H000317 is the genuine PVC union connector kit for Raypak heat pump pool heaters, supplied with a built-in drain. Raypak lists it for the 9350 and 9353.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the unions do\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pair of unions at the heat pump turns a permanent plumbing run into a serviceable connection. When the unit has to come out, you break the unions instead of cutting and regluing pipe, and the integral drain lets you empty the heat exchanger before a freeze rather than leaving water sitting in it over winter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the model number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source listing gives the third supported model two different ways, as 10353 in the title and 10355 in the summary. The 9350 and 9353 are consistent throughout. If your unit is a 103 series, read the model off the data plate and confirm before ordering.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48634258227412,"sku":"RAY-151-6489","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7dfdfea2-12ed-4f5c-a064-62f0203de005.png?v=1788827810"},{"product_id":"raypak-h000009-tx-valve-for-5200-6200-8200-6300-heat-pump-pool-heater-10-ton","title":"Raypak Heat Pump TX Valve | Heat Only Unit | H000009","description":"\u003cp\u003eRaypak Heat Pump TX Valve. OEM part number H000009.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48647921533140,"sku":"RAY-151-8272","price":202.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/139942_1_201210319245.jpg?v=1789036599"},{"product_id":"poolstat-cover-lock-rheem","title":"Raypak Rheem Poolstat Thermostat Cover and Lock Kit | All Heat Pump | 009540","description":"Works with the following models: All Raypak \u0026amp; Rheem Heat Pumps with Analog \u0026amp; Digital Controls. Cover is painted the same color as the cabinet. Allows you to use your own lock and key\u003cbr\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48649103114452,"sku":"RAY-151-1202","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/84354_1_20101223142925.jpg?v=1789060106"},{"product_id":"raypak-heat-exchanger-repair-r22-rhp-5310-6310-8320ti-h000074","title":"Raypak Heat Exchanger Repair for R22 RHP 5310, 6310, and 8320TI Heat Pumps, H000074","description":"\u003cp\u003eThe Raypak H000074 is a heat exchanger repair part for R22 RHP 5310, 6310, and 8320TI heat pump pool heaters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe H000074 is a heat exchanger repair part for Raypak R22 RHP model heat pumps, covering the 5310, 6310, and 8320TI heat pump pool heaters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your heat pump model before ordering, since heat exchanger components are specific to each heat pump model and refrigerant type. This part is sold individually under the number H000074.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48694904226004,"sku":"PSU-144779","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/144779_0_20199238418.jpg?v=1789765903"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/raypak-heat-pump-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}