{"title":"Repair Supplies","description":"\u003cp\u003eShop repair supplies at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"magic-lube-1-oz-o-ring-lubricant","title":"Aladdin Magic Lube 1 oz. O-Ring Lubricant, 630","description":"\u003cp\u003eMagic Lube is the tube most pool techs keep in the truck. It is a PTFE based lubricant and sealant for the o-rings, gaskets and bearings in pool and spa equipment, and it is not petroleum, which is the point.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy not ordinary grease\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePetroleum based products attack rubber, and many of the most common lubricants on the shelf are petroleum based. Use one on a pump lid o-ring and it swells, softens and fails. Magic Lube is PTFE based, so it is safe on rubber and compatible with most metals and plastics as well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterproof, non-melting and non-volatile, with a working range of -10°F to 425°F in wet or dry service. It forms a durable, adhesive film that keeps surfaces apart even under severe shock loads, it is chemical resistant, and it carries a USDA H-1 rating. Common uses are pump lid o-rings, filter tank o-rings, gaskets, bearings, motors and water filters.\u003c\/p\u003e\u003cp\u003eThis is the 1 oz. tube.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48624834445524,"sku":"ALA-60-1000","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6ae54446-bfcf-4b2f-b937-a0e281cc54e6.jpg?v=1788643346"},{"product_id":"96-oz-dura-white-pour-grade","title":"Deck-O-Seal Pour Grade Joint Sealant Kit, Dura White 96 oz., 4701031","description":"\u003cp\u003eDeck-O-Seal Pour Grade is a two part, polysulfide based joint sealant that you mix and pour into the expansion joints and cracks of a pool deck. This kit is the Dura White color in the 96 oz. size, part number 4701031.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy pour grade\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sealant is self leveling. Once poured into a horizontal joint it flows out flat and cures smooth, which suits the long coping to deck joint that runs around a pool. Polysulfide sealants stay flexible after cure, so the seal moves with the slab through heat and cold instead of cracking loose.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the joint, set backer rod where the joint is deep, mix the two parts as the kit instructions describe, and pour. Because it levels itself, it is not for vertical or sloped joints. Choose Dura White for light colored decks and coping; the pour grade is also made in other colors.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48624872358100,"sku":"DFC-55-3104","price":160.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a3556c90-240d-4b6a-aa15-61871e2cd8f4.jpg?v=1788647784"},{"product_id":"clear-silicone-sealant-tube-3-oz","title":"Boss Clear Silicone Sealant Tube, 3 oz., PLB103C","description":"\u003cp\u003eBoss PLB103C is a clear RTV silicone sealant in a 3 oz. tube, the size that lives in a service tech's bag. It is meant for sealing up pool pumps, PVC fittings and the other small joints on an equipment pad that need a cured, flexible seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it earns its keep\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRTV silicone cures at room temperature into a rubbery seal that stays flexible, which suits threaded fittings, housings and hairline gaps that a rigid adhesive would crack out of. Because it dries clear, a repair on white PVC or a pump body does not shout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSealant is not lubricant\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eO-rings that seal under compression, on pump lids, unions and filter tanks, want a lubricant such as Magic Lube, not sealant. Keep this tube for joints that need to set.\u003c\/p\u003e","brand":"American Granby","offers":[{"title":"Default Title","offer_id":48624874029268,"sku":"AMG-56-4181","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8effcb32-3476-425c-a0f0-6c617d44ffa1.png?v=1788647997"},{"product_id":"deck-o-shield-waterfall-stone-sealer-1-gallon","title":"Deck-O-Seal Deck-O-Shield Waterfall \u0026 Stone Sealer, 1 Gallon, 3460210","description":"\u003cp\u003eDeck-O-Shield is a ready to use, water-based sealer and water repellent for natural stone, concrete and masonry. It was developed for pool waterfalls, where it limits how much water soaks into structurally sound, crack-free surfaces, and it works just as well on stone decks, coping, walkways and patios.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSalt, stains and efflorescence\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOnce a surface is treated, salts have a harder time penetrating it, which cuts down the whitening and staining that salt water leaves on rock features. It also protects against efflorescence and rust staining, helps the surface shrug off spills, and reduces the dirt and contaminants that settle in and discolor stone over time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the surface thoroughly and let it dry. It can go on slightly damp stone, but a clean, dry, absorbent surface gives the best penetration and the longest service. Apply with a brush, roller or low-pressure sprayer under 50 psi, with a fan tip if spraying. Keep surface and air temperatures between 40 and 95 F during application and for eight hours afterward. Always test a small area on each type of surface first to check appearance and coverage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne gallon covers roughly 75 to 175 sq ft of natural stone, 100 to 175 sq ft of concrete or masonry, 60 to 100 sq ft of stucco and 50 to 100 sq ft of concrete block. Porous stone and block can need considerably more, sometimes a second coat. When dry the finish is matte and the surface looks virtually unchanged. Sealers and other chemical products are non-returnable once shipped.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48624876978388,"sku":"DFC-55-3100","price":116.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ed858d27-cbe6-4ace-bc15-7d26d20f0636.jpg?v=1788648472"},{"product_id":"96-oz-gray-pour-grade","title":"Deck-O-Seal Pour Grade Joint Sealant Kit, Gray 96 oz., 4701032","description":"\u003cp\u003eDeck-O-Seal Pour Grade is a two part, polysulfide based joint sealant for the expansion joints and cracks around a swimming pool deck. This is the 96 oz kit in gray, part number 4701032.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePourable and self leveling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMix the two components, pour the sealant into the joint and it levels itself. That makes it suited to horizontal joints: the joint between deck and coping, and the control joints across the slab. It is not for vertical joints, which need a sealant that holds its shape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll chemical products are non-returnable and non-refundable once they leave the warehouse, so estimate the length, width and depth of the joints you plan to fill before choosing a quantity.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48624880681172,"sku":"DFC-55-3106","price":149.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2840c7fb-901d-44fd-b5c1-98ceff0fdb83.jpg?v=1788648916"},{"product_id":"96-oz-tan-pour-grade","title":"Deck-O-Seal Pour Grade Joint Sealant Kit, Tan 96 oz., 4701033","description":"\u003cp\u003eDeck-O-Seal 4701033 is the 96 oz. pour grade joint sealant kit in tan. It is a premium grade, two part, polysulfide based sealant with a self leveling formula, made for sealing joints and cracks in the horizontal surfaces around a swimming pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe two components are mixed and poured into the joint, where the sealant levels itself and cures to a flexible seal that moves with the deck through heat and cold. Tan blends with light concrete and stone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure your joint length, width and depth to work out how many kits you need. Chemical products, including sealant kits, are non-returnable and non-refundable once shipped.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48624883990740,"sku":"DFC-55-3105","price":147.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_32edb2ee-1329-49b7-a860-9cb40a9b4dd8.jpg?v=1788649556"},{"product_id":"4708323-1-qt-tan-hs-1-sl-one-part-self-leveling-hybrid-joint-sealant","title":"Deck-O-Seal HS-1 SL One-Part Self-Leveling Hybrid Joint Sealant, 32 oz, Tan, 4708323","description":"\u003cp\u003eDeck-O-Seal HS-1 SL is a one-part, self-leveling joint sealant built on silyl-modified polymer (SMP) technology. It comes in a 32 oz (one quart) container in tan, and this listing is for that size and color.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause it is one-part there is nothing to mix. Pour it into a horizontal joint and it levels itself to a flat finish, then cures by reacting with moisture in the air. The result is a medium modulus sealant: firm enough to hold its shape and bond, flexible enough to move with the joint as the slab expands and contracts through the seasons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for the outdoors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe formulation is designed for strong adhesion and for resistance to aging and weathering, which is what a pool deck joint sees year round: sun, water, chemicals and temperature swings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChemical products are non-returnable and non-refundable, so check that tan is the color you need and that a 32 oz container covers the length of joint you have to fill.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48624921018580,"sku":"DFC-55-3194","price":54.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3463517a-a010-4f1e-9e40-616ed709deb1.jpg?v=1788653521"},{"product_id":"4708322-1-qt-gray-hs-1-sl-one-part-self-leveling-hybrid-joint-sealant","title":"Deck-O-Seal 32 Oz. HS-1 SL One-Part Self-Leveling Hybrid Joint Sealant, Gray, 4708322","description":"\u003cp\u003eDeck-O-Seal HS-1 SL is a one-part, self-leveling hybrid joint sealant, and this is the 32 ounce gray container, part number 4708322. It is built on silyl-modified polymer (SMP) technology, cures from atmospheric moisture, and sets up as a medium modulus sealant with strong adhesion and good resistance to aging and weathering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause it is one part there is nothing to mix. Poured into a horizontal joint it levels itself, so the finish comes out flat without tooling. Once it has cured it moves with the joint rather than cracking away from it, which is the job of a medium modulus sealant in an expansion or control joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the gray color in the one quart size. Estimate the joint length and cross section you have to fill and order enough containers to finish the run in one pass.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48624922099924,"sku":"DFC-55-3193","price":54.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_459c543e-5869-4c12-8ce3-e0992827e62a.jpg?v=1788653601"},{"product_id":"waterfall-stone-sealer-5-gallon","title":"Deck-O-Seal Deck-O-Shield Waterfall \u0026 Stone Sealer, 5 Gallon, 3460005","description":"\u003cp\u003eDeck-O-Shield is a water-based, ready to use water repellent sealer from Deck-O-Seal for the stone and concrete around a swimming pool. This is the 5 gallon size, part 3460005, enough for a full waterfall and deck job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made for natural stone, concrete and masonry, with waterfalls the headline use. It works just as well on natural stone decks, coping, walkways and patios. Once treated, a surface inhibits salt from penetrating, which reduces the whitening and staining that salt water leaves on stone. The finish is matte, so the stone keeps its natural look.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCoverage varies a lot with the porosity of the substrate. Expect 75 to 175 sq ft per gallon on natural stone, 100 to 175 on concrete and masonry, 60 to 100 on stucco and 50 to 100 on concrete block. Very porous stone and block can take considerably more and may need an extra application, so always seal a test area first to find your real rate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReturns\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChemical products are non-returnable and non-refundable. Once they leave the warehouse they cannot be restocked or resold, so measure your area before you order. A 1 gallon size is available for smaller jobs.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48624924688596,"sku":"DFC-55-3158","price":401.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_05fd7497-d26e-4bd1-bd5b-cfca30550f0e.jpg?v=1788653739"},{"product_id":"magic-lube-5-oz-o-ring-lubricant","title":"Aladdin Magic Lube 5 oz. O-Ring Lubricant, 631","description":"\u003cp\u003eMagic Lube is a PTFE based lubricant and sealant for the o-rings, gaskets and seals around a pool or spa. It forms a strong adhesive film that keeps mating surfaces from touching, even under severe shock loads, and it works in wet or dry conditions. This is the 5 oz. tube, Aladdin part 631.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy PTFE and not petroleum\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePetroleum based products corrode rubber, and many of the most common lubricants on the shelf are petroleum based. Magic Lube is not, which is why service techs carry it for every o-ring in and around the pool: pump lids, filter tanks, valves, unions and chlorinator caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNon-melting, non-volatile and waterproof, rated from -10°F to 425°F, chemical resistant, and rated by the USDA as environmentally safe. It is compatible with most metals, rubbers and plastics and is commonly used on motors, o-rings, gaskets, bearings and water filters.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48624930259156,"sku":"ALA-60-1001","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3a7df16d-7f72-468c-bbd4-8dc87fc96c68.jpg?v=1788655050"},{"product_id":"one-step-sealing-compound-11-oz-gray","title":"Deck-O-Seal One-Step Sealing Compound, 11 oz. Gray, 4705012","description":"\u003cp\u003eDeck-O-Seal One-Step is a single component polysulfide sealing compound for the joints in and around a pool deck. This is the gray version in an 11 oz. cartridge, sized for touching up a few joints or sealing a short run rather than a whole deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy One-Step\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe compound is elastomeric, so it stretches and recovers as the deck moves with temperature changes instead of cracking or pulling away from the concrete. It is also non-sag, which means it holds its shape in vertical and sloped joints while it cures rather than running out the bottom. There is nothing to mix: it comes ready to use in the cartridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the color to your deck. Deck-O-Seal makes this compound in gray, tan and Dura White, and in larger gun grade kits and pour grade versions for flat work. Like all chemical products, sealant cannot be returned once it ships.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48624957587668,"sku":"DFC-55-3095","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ddd4fe7b-176d-4c00-bbd7-6d8bd6ab3c49.jpg?v=1788656134"},{"product_id":"pool-putty-epoxy-plaster-repair-2-part-white-14-oz","title":"Atlas Minerals \u0026 Chemicals Pool Putty Epoxy Plaster Repair, 2-Part White 14 oz, 530318","description":"\u003cp\u003eEpoxybond Pool Putty from Atlas Minerals \u0026amp; Chemicals is a two part epoxy putty made for plaster repairs on concrete and gunite pools. It comes as a 14 oz cartridge of resin and hardener in white, and it cures under water, so cracks and leaks below the waterline can be fixed without lowering the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ratio is 1 to 1. Cut equal lengths of resin and hardener, mix them above water and knead until the putty is one even color. There is nothing to weigh or measure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUnder water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClear the area of loose plaster, slime and algae, then press the mixed putty firmly into the crack or void. Apply it at least 1\/16 in. thick and leave it alone until it has fully cured. Once set it will not shrink or sag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbove water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean off grease, rust and loose material and rough up the surface with a wire brush or sandpaper so the epoxy has something to grip. After pressing the putty in place you can shape or smooth it with a wet sponge before it hardens. A black version is available for dark finishes.\u003c\/p\u003e","brand":"Atlas Minerals \u0026 Chemicals","offers":[{"title":"Default Title","offer_id":48624985899220,"sku":"ATM-60-5081","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f04767d1-2439-45d5-a083-23d61a532231.png?v=1788661342"},{"product_id":"sealer-deck-o-shield-plus-1-gallon","title":"Deck-O-Seal Deck-O-Shield Plus Sealer, 1 Gallon, 3460710","description":"\u003cp\u003eDeck-O-Shield Plus is Deck-O-Seal's premium grade, water based sealer for natural stone, sold here in the one gallon size, part number 3460710. It is ready to use out of the can and dries to a matte finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for salt pools\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSalt water wicks into porous coping and deck stone and crystallizes inside it. Over time that pressure pits and spalls the surface. Deck-O-Shield Plus is formulated specifically to seal those pores, which makes it the right choice for coping and decks around saltwater pools. The same sealing limits spalling from freeze-thaw cycles in cold climates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNatural stone is the target surface, but it works on any porous material: tile, concrete, pavers and grout included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDeck-O-Shield Plus is a chemical product and cannot be returned once shipped. Measure the area first.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48625001365716,"sku":"DFC-65-0710","price":244.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bf0ec80d-a454-4cb2-8a76-c8b3ee209e11.jpg?v=1788661895"},{"product_id":"96oz-dura-white-gun-grade-non-sag-kit","title":"Deck-O-Seal 96 oz Dura White Gun Grade Non-Sag Kit, 4702031","description":"\u003cp\u003eDeck-O-Seal Dura White gun grade is a two component, polysulfide based joint sealant that stays where you put it. The non-sag, non-flowing formula makes it the right choice for vertical joints, cracks and any spot where a self leveling sealant would run off. It is intended for both interior and exterior work and is rated for submerged applications, which covers the joints in and around a swimming pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the kit is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 96 oz gun grade kit in Dura White, part number 4702031. The two components are mixed on site and applied with a caulking gun. For horizontal deck joints where a flowing sealant is wanted, Deck-O-Seal offers a pour grade Dura White kit in the same size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReturns\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSealants are chemical products and are non-returnable and non-refundable. Once they leave the facility they cannot be restocked or resold under safety and quality rules, so confirm the grade and color match your job before ordering.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48625007034580,"sku":"DFC-55-3086","price":238.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5eca7d65-a7c8-45c8-9742-484d72a35652.jpg?v=1788662123"},{"product_id":"perma-pool-patch-50lb","title":"CGM Inc Perma Pool Patch, 50 lb, 50PL","description":"\u003cp\u003ePerma Pool Patch from CGM Inc is a fast setting, high strength white mortar supplied in a 50 lb bag, part number 50PL. It is made to be applied under water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNo draining\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe reason to reach for this material is that the repair can be made with the pool still full. The mix sets under water, so a crack, chip or hole in a concrete pool can be dealt with without the cost, the risk and the hassle of dropping the water. It works just as well on out of water repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStrength and bonding\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mix is twice as strong as ordinary cement with three times the bonding power. It bonds to old and new concrete, masonry and metal, and it is formulated for the surfaces a pool is actually made of: concrete, plaster and gunite.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAdd water, mix and apply. Nothing else is needed. Pigment can be worked into the mix if you want the patch to sit closer to the color of the surrounding finish.\u003c\/p\u003e","brand":"C G M Incorporated","offers":[{"title":"Default Title","offer_id":48625717543124,"sku":"CGM-60-5225","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f67eecde-12fa-4181-9cbb-15d88e67beb8.jpg?v=1788689245"},{"product_id":"novalink-sl-pool-deck-concrete-sealant-stone-color-68oz-bag","title":"Chem Link NovaLink SL Pool Deck Concrete Sealant, Stone Color, 68 oz Bag, F1239ST","description":"\u003cp\u003eNovaLink SL is Chem Link self leveling joint sealant for concrete pool decks, supplied in the Stone color in a resealable bag. It fills the expansion joints, cracks and gaps that open up between deck sections and around coping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSelf leveling, poured from the bag\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCut the corner of the bag and run the sealant into the joint. It flows out level on its own, so there is no tooling or smoothing pass afterward. That is the difference between this and a cartridge sealant that has to be struck flat by hand along every foot of joint.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for wet surroundings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDeck joints near a pool rarely dry out completely. NovaLink SL is formulated for damp conditions, which is why it is used around pools and fountains rather than a general purpose construction sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor and pack\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStone suits light concrete and stone decking. A Gray version is a separate item. The bag reseals, so leftover sealant can be kept for the next section of joint instead of being thrown out.\u003c\/p\u003e","brand":"Chem Link","offers":[{"title":"Default Title","offer_id":48625744380116,"sku":"CKP-65-1237","price":107.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cb3262c7-2345-4bae-82c8-bd4dabce298b.jpg?v=1788690734"},{"product_id":"plast-aid-6-oz-kit","title":"Plast-Aid 6 oz. Kit, PLA-6","description":"\u003cp\u003ePlast-Aid is a two part repair compound, a liquid and a powder, supplied here as the 6 oz. kit, part number PLA-6. It does not behave like a glue in a tube. You combine the two parts and a curing reaction starts immediately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it cures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMixed, the compound thickens, passing through a glue like stage on its way to a solid. After roughly 10 minutes it has formed a hard, durable, waterproof acrylic plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorking with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the cured material is a real plastic rather than a flexible filler, it can be sanded, drilled or filed once it has set. That makes it usable where a repair has to be shaped, tapped or trimmed flush rather than simply sealed.\u003c\/p\u003e","brand":"Plast-Aid","offers":[{"title":"Default Title","offer_id":48625815879892,"sku":"PST-60-701","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7ce40152-3cac-48f8-8ee3-013f3980d088.png?v=1788700488"},{"product_id":"magic-lube-ii-5-oz","title":"Aladdin Magic Lube II 5 oz, 651","description":"\u003cp\u003eMagic Lube II is a silicone based lubricant and sealer in a 5 oz tube, Aladdin part 651. It is formulated for use under adverse conditions, and it is the grease service techs carry for the o-rings around a pool and spa.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy not a petroleum grease\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePetroleum based products corrode rubber. That catches people out, because many of the best known lubricants on the shelf are petroleum based. Put one on a pump lid o-ring or a diverter shaft seal and the rubber swells, softens and fails early. Magic Lube II is silicone, so it can go on every o-ring in and around the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eValves and other applications that need the added protection of a silicone compound: pump lid o-rings, filter tank o-rings, diverter shafts, unions and gaskets. It is non melting, completely waterproof and chemical resistant, and it is USDA H-1 rated.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48625852973268,"sku":"ALA-60-5251","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_87a776b1-0f1a-4d54-8673-51314f0e1145.jpg?v=1788701699"},{"product_id":"aquabond-underwater-swimming-pool-repair-epoxy-kit-for-pools-and-spas-white-dmk-5000","title":"Aquabond Underwater Swimming Pool Repair Epoxy Kit for Pools and Spas, White, DMK-5000","description":"\u003cp\u003eThe Aquabond DMK-5000 is an underwater repair starter kit built around the UW-5000 epoxy compound. It is white, and it is meant for pools and spas where the damage is below the waterline.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy underwater matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost structural repair products want a dry, prepared surface, which on a pool means dropping the water and losing days. This compound is made to be applied and to bond while submerged, so a crack or a leak can be dealt with where it is. The kit is listed for cracks, leaks and repairs to fiberglass and PVC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe itemized kit contents are a UW-5000 50ml tube of underwater repair compound, a DM-50 dispensing gun and a bag of five SM-5416 static mixer tips. The compound goes into the gun, the mixer tip goes on the end, and the material comes out ready to place. Once you have the gun and tips, later repairs only need another cartridge.\u003c\/p\u003e","brand":"Aquabond","offers":[{"title":"Default Title","offer_id":48626286330068,"sku":"AQB-60-1308","price":157.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_77fdc427-db98-4eae-af73-a55891920d65.jpg?v=1788707660"},{"product_id":"perma-pool-patch-10lb","title":"CGM Perma Pool Patch 10 lb Bucket, 10PL","description":"\u003cp\u003ePerma Pool Patch is a fast setting, high strength mortar for patching and repairing pool plaster. This is the 10 lb bucket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn or out of the water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mix can be applied underwater, which is what separates it from an ordinary mortar. A chipped step edge, a hollow spot or a crack can be dealt with without dropping the water level and exposing the shell, and the fast set is what makes working under water practical.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is supplied white. Cement colorants can be added to the mix if the surrounding plaster is tinted, so it is worth mixing a small test batch and letting it cure before committing to a large visible patch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 10 lb bucket suits a normal repair session. The same patch is stocked in a 3 lb size for small touch ups and a 50 lb size for larger resurfacing work.\u003c\/p\u003e","brand":"C G M Incorporated","offers":[{"title":"Default Title","offer_id":48626996183252,"sku":"CGM-60-5256","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2e347de5-d691-4f8b-9d78-79a7481edf67.jpg?v=1788718870"},{"product_id":"wet-niche-potting-compound","title":"3M Scotchcast Wet Niche Potting Kit, 2136","description":"\u003cp\u003eThe 3M Scotchcast 2136 wet niche potting kit encapsulates the 8 AWG ground connection inside a wet niche shell. That encapsulation is what the NEC calls for when rigid nonmetallic conduit is used to install a wet niche underwater lighting fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the compound is doing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA ground connection in a niche lives permanently in pool or fountain water and, in a shallow niche, in sunlight as well. Both attack the joint. Potting the connection seals it away from the water and from the light, so the bond stays sound instead of corroding out of sight behind the fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it applies\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is UL Listed as a potting compound for swimming pool, fountain and spa equipment, and it is intended for use only where it is adhering to copper, copper alloy and stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA package of the 2136 compound, a cleaning pad kit for preparing the connection, an applicator stick and a pair of gloves.\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":48627578208468,"sku":"GEP-57-5203","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fae8764f-6543-4d5f-b188-4b8ebe0b82f6.jpg?v=1788723856"},{"product_id":"one-step-sealing-compound-11-oz-tan","title":"Deck-O-Seal One-Step Sealing Compound, 11 oz., Tan, 4705013","description":"\u003cp\u003eDeck-O-Seal 4705013 is the One-Step sealing compound in tan, an 11 ounce tube of single component, polysulfide based sealant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJoints around a pool deck are not static. Concrete grows and shrinks with the temperature, and the gap between slabs, or between deck and coping, changes width all year. A rigid filler cracks away from one edge within a season. This compound is elastomeric, so it stretches and recovers with the joint instead of failing at the bond line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorking with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBeing single component means there is no mixing and no pot life to race. The non-sag formula holds its tooled shape, so it can be used in a vertical or sloped joint without slumping while it cures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChemical products are non-returnable and non-refundable, so confirm the color and the quantity you need before ordering. This is the tan 11 ounce size.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48627615367380,"sku":"DFC-55-3094","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7e10ca7a-f7f8-47fe-8b12-3c5ada526693.jpg?v=1788725369"},{"product_id":"silicone-lubricant-75oz","title":"Pentair Silicone Lubricant, .75 oz, R172036","description":"\u003cp\u003ePentair R172036 is a .75 oz tube of silicone lubricant for the rubber seals on Rainbow automatic chlorine feeders. It is the lubricant Pentair lists against the feeder parts themselves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid o-ring gets the most benefit. That seal is opened and closed every time the feeder is loaded, and a dry o-ring drags, pinches and eventually leaks. A thin film of silicone lets it seat evenly, holds the seal under pressure, and stops the lid from bonding to the body after a season in the sun. The internal o-rings that get handled during service want the same treatment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSilicone, not grease\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSilicone is chosen because it is compatible with the rubber compounds used in pool equipment. Petroleum based grease can swell or soften the same seals, so a tube kept for feeder work is worth having on the shelf.\u003c\/p\u003e\u003cp\u003eListed for Rainbow feeder models 300, 302, 300-19, 300-29, 300-29X, 320, 322, HC-3315, HC-3330 and 3340. Use it sparingly: a light coat, not a packed joint.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627686867156,"sku":"RAI-451-4023","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f412b34b-fe72-4a63-adf9-51533362171d.jpg?v=1788726593"},{"product_id":"pool-putty-epoxy-plaster-repair-2-part-black-14-oz","title":"Atlas Minerals \u0026 Chemicals Pool Putty Epoxy Plaster Repair, 2-Part Black 14 oz, 530317","description":"\u003cp\u003eEpoxybond Pool Putty is a two part, hand moldable epoxy putty made for concrete and gunite pool repairs. This is the black version in a 14 oz cartridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRepairs with the pool full\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe putty hardens under water, which is the point of it. Cracks, leaks and chipped plaster can be dealt with without draining the pool and without waiting for a surface to dry. Once cured it will not shrink or sag, so the patch stays where you put it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMixing and applying\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cartridge form gives an equal 1 to 1 ratio, so you cut off what you need, knead the resin and hardener together until the color is uniform, and press the putty firmly into the repair. For underwater work, mix above the water first, and make sure the area is clear of loose material, slime and algae. Above water, clean off grease and rust and roughen the surface with a wire brush or sandpaper, then smooth the finished patch with a wet sponge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting a lasting repair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eApply the putty at least 1\/16 in. thick. Thinner than that and the repair has nothing to hold on to. Once it is in place, leave it undisturbed until it has cured completely.\u003c\/p\u003e","brand":"Atlas Minerals \u0026 Chemicals","offers":[{"title":"Default Title","offer_id":48627881541844,"sku":"ATM-60-5084","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9efeb6ff-5d93-4e86-9cce-021ade3908ea.png?v=1788729564"},{"product_id":"65-lb-bag-one-step-bond-kote®-surface-preparation","title":"SGM One-Step Bond Kote Surface Preparation, 65 lb Bag, PBBKOS","description":"\u003cp\u003eOne-Step Bond Kote, part number PBBKOS, is a surface preparation product supplied in a 65 lb bag. It is the coat that goes onto a prepared pool shell ahead of a new finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits in the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eResurfacing is a sequence, and the bond coat is the step that decides whether the new finish stays attached to the old shell. This is that step, sold as a one step product rather than a separate primer and slurry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBags are contractor sized at 65 lb, and a pool takes several of them, so work out coverage from the manufacturer instructions before you order. Larger quantities can be quoted rather than bought a bag at a time.\u003c\/p\u003e","brand":"SGM","offers":[{"title":"Default Title","offer_id":48628806320340,"sku":"SGM-37-3000","price":240.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2a6e3d59-1356-4b3e-951f-15371f6eae58.jpg?v=1788751870"},{"product_id":"jandy-flopro-fhp-series-pump-repair-kit","title":"SuperPro Jandy FloPro FHP Series Pump Repair Kit, GO-KIT88V-9","description":"\u003cp\u003eThe SuperPro GO-KIT88V-9 is a pump repair kit for the Jandy FloPro FHP series. It gathers the service pieces for that pump family under one part number so a rebuild takes one order rather than several.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAftermarket, not Jandy branded\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuperPro builds this kit as an aftermarket alternative to buying the pieces individually. It is sold for the FloPro FHP series, so read the model off the pump label before ordering, since Jandy has used the FloPro name across more than one pump line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur data for this kit does not list the individual contents. If you need a particular seal, gasket or hardware piece confirmed, check GO-KIT88V-9 against the FHP parts list or contact us first. The FloPro backplate kit, the lid o-ring, the pump basket and the housing body are separate parts, and a pump that is already apart is the right time to look at all of them.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48628815888596,"sku":"SPG-601-6110","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_47de383e-e64e-483a-b952-f3418930c4cd.png?v=1788752383"},{"product_id":"hayward-spxhkit3-quick-pump-repair-replacement-kit-for-hayward-super-pool-and-spa-pumps","title":"Hayward Quick Pump Repair Replacement Kit for Super Pool and Spa Pumps, SPXHKIT3","description":"\u003cp\u003eThe Hayward SPXHKIT3 is the quick fix repair kit for Hayward Super pool and spa pumps. Hayward lists it for the Super Pump VS 115V and for the SP2600VSP, SP1600X and SP2600X series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump service parts tend to come in sets because the pieces wear together and because a pump that is already apart should not go back together with half of it new. Ordering the kit under a single part number keeps the job to one order and one delivery instead of three.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo checks are worth the minute they take. First, read the model number off the pump label rather than going by the Super Pump name on the housing, because Hayward has built the line across several generations. Second, our data for SPXHKIT3 does not break out the individual contents, so if you are chasing one specific seal or gasket, confirm it against your pump parts list or ask us first.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628816249044,"sku":"HAY-101-9945","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPXHKIT3_hayward_quickfix.jpg?v=1788752411"},{"product_id":"magic-lube-ii-1-oz","title":"Aladdin Magic Lube II, 1 oz, 650","description":"\u003cp\u003eAladdin Magic Lube II, part 650, is a silicone based lubricant and sealant in a 1 oz tube. It is the small tube of the product that lives in most service vans.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump lid O-rings, filter clamp seals, valve stems, union O-rings and threaded fittings. Anywhere a rubber seal has to slide into place and then hold pressure, a light film of silicone is what lets it do both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy silicone and not any grease\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePetroleum based products attack many of the rubber compounds used in pool seals, so an O-ring greased with the wrong thing swells, softens and fails early. A silicone lubricant does not do that, which is why it is the standard around a pool pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much to use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLess than people expect. A thin film across the seal is enough. A heavy coat collects grit, and grit under an O-ring is what causes the leak you were trying to prevent.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48628860289236,"sku":"ALA-60-1002","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d7a496bd-a2df-4a48-aee6-455796674654.jpg?v=1788755548"},{"product_id":"no-diving-6x6-tile-image-non-skid-deck","title":"Inlays NO DIVING 6x6 Tile Image, Non-Skid (Deck), C621500","description":"\u003cp\u003eThe Inlays C621500 is a 6 by 6 inch NO DIVING tile for the pool deck, carrying both the lettering and the no diving image.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWords plus symbol\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA warning that has to be read is a warning many swimmers walk straight past. Pairing the lettering with the symbol means the message lands on anyone glancing down, including children and anyone who does not read English.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for the deck\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the non-skid deck version, so the face is intended to be stood on wet. It is set into the deck as part of the surface rather than fixed on top of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the rest\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tile is part of the same 6x6 non-skid deck range as the depth marker tiles, so a pool can be marked out with depths and warnings that all match in size and finish.\u003c\/p\u003e","brand":"Inlays","offers":[{"title":"Default Title","offer_id":48628905017556,"sku":"INL-37-5105","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_66db9a85-f9f1-4295-adae-abfd492521d1.jpg?v=1788757156"},{"product_id":"24oz-blue-foam-bond-aerosol-adhesive","title":"Gladon 24 oz. Blue Foam Bond Aerosol Adhesive, FB24","description":"\u003cp\u003eGladon Foam Bond is a pressure sensitive aerosol adhesive in a 24 oz. can, made for bonding pool wall foam. It sticks foam to itself and to concrete, wood and other surfaces that normally resist adhesive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy installers use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGladon developed the formula through years of work with pool installers, and it is packaged with the high volume spray nozzle that suits the job. The adhesive is blue, which sounds like a small thing until you are working around a pool wall and need to see at a glance where you have already sprayed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorking with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is intended for vinyl liner pool wall foam. Spray in open air, since aerosol adhesive drifts further than you expect, and cover any liner, decking or vehicle nearby that you do not want to find tacky afterwards. Work in sections and keep the coverage even rather than laying it on heavily in patches.\u003c\/p\u003e","brand":"Gladon","offers":[{"title":"Default Title","offer_id":48629184790740,"sku":"GAD-801-6169","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bd04be4d-48d6-48f9-a7f8-8656b63d0591.jpg?v=1788760071"},{"product_id":"silicone-lube","title":"Pentair Lifeguard Silicone Lubricant, 3\/4 oz Bottle, R172351","description":"\u003cp\u003ePentair R172351 is the Lifeguard silicone lubricant, supplied in a 3\/4 oz bottle. It is made for the rubber seals, gaskets and O-rings that sit against plastic and metal in pool equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it belongs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair recommends it for filters, pumps, chlorinators and valves, which are the places on a pool pad where corrosion takes hold and where a seal has to be opened and closed repeatedly. Lubricating the connecting parts extends the life of the rubber and helps stop O-rings and seals cracking as they age.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it stops leaks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost nuisance leaks at a pump lid, a filter clamp or a union are a dry O-ring problem rather than a broken part. Without lubrication the ring drags, twists and rolls out of its groove as the fitting is tightened. A thin film lets it slide into place and seat evenly, so the joint seals the way it did when the equipment was new.\u003c\/p\u003e\u003cp\u003eThe 3\/4 oz bottle is a service size. A small amount goes a long way on an O-ring, so one bottle covers a season of routine filter and pump work.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48629294825684,"sku":"RAI-45-959","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_72140d61-2de1-4167-a363-08434e1b4f71.png?v=1788762053"},{"product_id":"4703031-white-deck-o-seal-125-kit-96oz","title":"Deck-O-Seal 96 oz 125 Two-Part Pour Grade Joint Sealant Kit, White, 4703031","description":"\u003cp\u003eDeck-O-Seal 125 is a two part, pour grade joint sealant supplied here as a 96 oz white kit, part number 4703031. It is a self leveling, polysulfide based compound for the expansion joint between a pool deck and the coping or shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it behaves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe sealant is poured rather than gunned, and it levels itself in the joint. It cures to a firm, flexible, tear resistant rubber that is highly resilient and recovers well even after extended periods of compression or elongation, which is exactly the cycle a deck joint sees through a year of heat and cold. It resists most chemicals, all weather conditions, aging and shrinkage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFirmer than the standard product\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDeck-O-Seal 125 is 25 percent firmer than regular Deck-O-Seal. That extra firmness is the reason to pick 125 over the standard version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is premeasured for job site use: a 2.84 L base container plus a separate container of setting agent. The base container is deliberately oversized so the setting agent can be added and mixed in place.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48633450660052,"sku":"DFC-55-8502","price":191.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fed30813-e96c-430a-8267-0c8a0e3ed2ac.png?v=1788804851"},{"product_id":"1-2-with-m-6x6-tile-4-numbers-non-skid-deck-depth-marker","title":"Inlays 1.2 with M 6x6 Depth Marker Tile, 4 in Numbers, Non-Skid Deck, C622712","description":"\u003cp\u003eThis is an Inlays depth marker tile, part number C622712, in the 6 inch by 6 inch format with 4 inch numbers. The face reads 1.2 with an M.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe deck version\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is supplied as a non-skid tile for the deck, so the face is textured for the walking surface rather than smooth like a waterline tile. That distinction matters when you are ordering: the deck and waterline versions of the same depth are separate items.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlan the full run\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDepth markers work as a set. They are placed around the pool at the depth changes so a swimmer reads the depth before entering, which usually means several tiles at several depths plus any NO DIVING markers. Working out the whole layout before ordering saves a second order later.\u003c\/p\u003e","brand":"Inlays","offers":[{"title":"Default Title","offer_id":48633450987732,"sku":"INL-37-4001","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0754d59-1a2d-4df5-8ea9-d743b812d379.jpg?v=1788804856"},{"product_id":"1-qt-quickn-thick-tile-clnr","title":"Bio-Dex 1 qt Bottle Quick 'n Thick Tile Cleaner, QT032","description":"\u003cp\u003eBio-Dex Quick 'n Thick, part number QT032, is a one quart tile cleaner for the waterline grime that builds up on pool tile and vinyl liners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it lifts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe scum line at the water surface is a mix of body oils, suntan lotion, grease, dirt and general oil, and it stains tile and liners if it is left. This cleaner is made to break that film down so the surface comes back clean rather than dull.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThick on purpose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe thicker body is the useful part. A thin cleaner runs off a vertical tile band before it has done anything, while a gel stays put on the line you are working. Use it straight for a heavy build up, or dilute it when the job is lighter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere else it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is also used on pool equipment, spa surfaces and vinyl to lift soil and dirt, and it is formulated to be fume free, which matters when you are working on a spa or an indoor pool.\u003c\/p\u003e","brand":"Bio-dex Laboratories","offers":[{"title":"Default Title","offer_id":48633451774164,"sku":"BDL-50-149","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_153f65be-0f78-45ce-baf3-3a15984c3600.png?v=1788804874"},{"product_id":"96-oz-redwood-pour-grade","title":"Deck-O-Seal Pour Grade Joint Sealant Kit, Redwood 96 oz., 4701035","description":"\u003cp\u003eDeck-O-Seal pour grade is a two part, polysulfide based joint sealant, supplied here in a 96 oz. redwood kit. It is a premium grade, self leveling formula for the joints and cracks in the deck around a swimming pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy self leveling matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pour grade sealant is mixed and poured into the joint, where it settles flat on its own. There is no tooling and no ridge left standing proud, which is what you want on a surface people walk on barefoot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExpansion joints\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe joint between a pool deck and the coping or a slab is there so the two can move separately with temperature. Sealing it keeps water and grit out of the gap. When the old sealant hardens, shrinks or pulls away from one side, it stops doing that job and is due for replacement.\u003c\/p\u003e","brand":"Deck-O-Seal","offers":[{"title":"Default Title","offer_id":48633453969620,"sku":"DFC-55-3138","price":187.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2073de3c-1813-42c6-8f94-516561efc876.jpg?v=1788804963"},{"product_id":"50-lb-hydraulic-water-stop-cement-gray","title":"Quikrete 50 lb. Hydraulic Water-Stop Cement, Gray, 1126-50","description":"\u003cp\u003eQuikrete 1126-50 is a hydraulic water-stop cement supplied in a 50 lb bucket. It is a rapid setting, high strength material made to plug leaks in concrete and masonry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOrdinary patching products need a dry surface. This one does not. It is mixed and pressed into a crack that is actively passing water, and it sets in three to five minutes, quickly enough that the flow cannot wash it back out. That makes it the usual choice for a leaking wall penetration, a cracked equipment pad, or a below grade block wall that is weeping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it can be used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eQuikrete lists it for use above and below grade, and it cures gray so a repair reads as concrete rather than as a bright patch. Mix only as much as you can place inside the working time, because once it starts to set there is no reworking it.\u003c\/p\u003e","brand":"Quikrete","offers":[{"title":"Default Title","offer_id":48633648349396,"sku":"QKC-37-2012","price":153.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5eac5f0c-1ec5-4d43-adb3-3e2d58cb2cd2.jpg?v=1788808267"},{"product_id":"perma-pool-patch-3lb","title":"CGM Perma Pool Patch, 3 lb Pail, 300PL","description":"\u003cp\u003ePerma Pool Patch is a fast setting, high strength patching and repair mortar for pool plaster, supplied here as CGM part 300PL in a 3 lb pail.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWet or dry application\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe reason this product stays in a service truck is that it can be worked in the water. A chipped step, a void behind a fitting or a cracked plaster face can be dealt with the day it is found instead of scheduling a drain down. It sets quickly, which is what lets it hold on a wet or vertical surface, so mix only what you can place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe patch is white. If the surrounding plaster is tinted, cement colorants can be blended into the mix to bring the repair closer to the existing finish. Test a small batch first, since color shifts as the mortar cures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it suits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 3 lb pail is a spot repair size. It handles chips, cracks, hollow spots and small voids, and works as either an emergency patch or a permanent one.\u003c\/p\u003e","brand":"C G M Incorporated","offers":[{"title":"Default Title","offer_id":48633703170260,"sku":"CGM-60-5254","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_57105572-4677-4342-9625-8c67f91fe745.jpg?v=1788812027"},{"product_id":"silicone-general-10-3-oz-12-cs","title":"Boss 802 Clear Acetoxy Cure Silicone General Purpose Adhesive, 10.3 oz, 142315","description":"\u003cp\u003eBoss 802 is a one part, mildew resistant acetoxy cure silicone sealant, supplied clear in a 10.3 oz size under part number 142315.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is designed for sealing spa jets, skimmers and fittings, and it handles most of the general repair and maintenance sealing that comes up around a pool. Curing clear means a bead around a fitting stays inconspicuous instead of drawing the eye.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAcetoxy cure\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAcetoxy silicone cures quickly by reacting with moisture in the air, releasing acetic acid as it does, which is the vinegar smell. It bonds well to glass, glazed and most plastic surfaces. Because it cures on contact with humidity, tool the bead promptly and cap the tube after use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSilicone only holds on a surface that is clean and dry. Remove the old sealant completely, degrease the joint and let it dry before laying a new bead.\u003c\/p\u003e","brand":"Accumetric Inc\/ Boss Pool\u0026spa","offers":[{"title":"Default Title","offer_id":48633703694548,"sku":"BOS-60-3009","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_92f5d31c-4a34-439f-bb86-ad519145fc08.png?v=1788812103"},{"product_id":"21-round-armor-shield-floor-pad","title":"GLI 21' Round Armor Shield Floor Pad, 70-0021RD-BLK-160","description":"\u003cp\u003eArmor Shield is GLI's floor pad for above ground pools, and this is the 21' round size. It goes down between the prepared base and the vinyl liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is made of\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArmor Shield is a polypropylene geotextile blend rather than the foam padding that has traditionally been used for this job. The point of the material is puncture resistance: it minimizes the cuts and punctures that come from rocks, roots, grass and even glass working their way up through a sand or soil base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe other two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pad also slows convective heat loss into the ground, so the pool holds its warmth better than it would on bare earth. And it puts a softer layer underfoot, which is the difference most bathers actually notice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pad is laid over the base after it has been leveled and cleared, and before the liner goes in. Getting the base right first still matters, since a pad protects the liner but does not flatten a bad floor.\u003c\/p\u003e","brand":"GLI","offers":[{"title":"Default Title","offer_id":48633766936788,"sku":"AG-LA-1121","price":181.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d78e258e-f2b8-47ec-96bc-3788a3facf95.jpg?v=1788814851"},{"product_id":"no-diving-6x6-tile-with-image","title":"Inlays NO DIVING 6x6 Tile with Image, Smooth (Waterline), C611500","description":"\u003cp\u003eThe Inlays C611500 is a 6 inch by 6 inch NO DIVING marker tile in the smooth waterline finish. It carries the international no diving symbol together with centered 2 inch lettering in red and black on a white ground.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe smooth face means this tile belongs on the inside waterline of the pool, set into the run of waterline tile so the warning reads clearly from the deck and from the water. Deck surfaces take the non skid version instead, which is a separate part number, and a smooth tile should never be used where people walk.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is made\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe marking is printed with ceramic glaze inks and the tile is kiln fired, so the message stays sharp under sunlight and pool chemistry rather than fading or lifting the way an applied decal does.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a single tile. Count the positions the waterline run needs, and check whether your local code also calls for depth markers, which are ordered as their own tiles.\u003c\/p\u003e","brand":"Inlays","offers":[{"title":"Default Title","offer_id":48633772146900,"sku":"INL-37-5109","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_accbd04e-241d-42c0-93a8-bdff92772362.jpg?v=1788815128"},{"product_id":"aboveground-pool-wall-foam-2-1-8x48x100","title":"Gladon Aboveground Pool Wall Foam 2#, 1\/8\" x 48\" x 100', AG100","description":"\u003cp\u003eGladon AG100 Waveless wall foam is a 100 foot roll, 48 inches wide and 1\/8 inch thick, in blue, at the number 2 density. It is fitted to the inside of an above ground pool wall before the liner goes in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does for the liner\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA bare steel wall is not a friendly surface for vinyl. Seams, rivets, rust spots and dents all print through, and every knock from inside the pool lands on metal. A layer of wall foam puts something soft between the two, so the wall reads as smooth from the water side and the liner takes a gentler life.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWall foam goes in during a liner change or a new build, while the wall is open and clean. Measure the circumference of the pool first and compare it against the 100 foot roll length, since a larger pool may need more than one roll and running short partway around is a bad place to stop.\u003c\/p\u003e","brand":"Gladon","offers":[{"title":"Default Title","offer_id":48633783615700,"sku":"GAD-60-6168","price":116.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_962ebbe1-d249-4a19-b6c9-2b0ba738e6d2.jpg?v=1788816271"},{"product_id":"vinyl-liner-repair-kit-2-oz-4-oz-tube","title":"Boxer Adhesives Vinyl Liner Repair Kit (2 oz. \/ 4 oz. Tube), 859","description":"\u003cp\u003eThe Boxer Adhesives 859 is a vinyl liner repair kit, the tube and patch material used to close tears and pinholes in a swimming pool liner. It suits above ground and in ground vinyl pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy small holes are worth chasing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA liner pinhole rarely looks urgent. The trouble is not the water in the pool, it is the water behind the liner: it works its way into the sand or vermiculite base and washes it out, and once the base is rutted the liner stretches into the hollow and the damage spreads. Patching early is the cheap version of that repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTube size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis product is listed with two different tube sizes in its source data, a 2 oz. \/ 4 oz. title and a 2 oz. summary. If the exact quantity matters for your job, ask us to confirm before you order.\u003c\/p\u003e","brand":"Boxer Adhesives","offers":[{"title":"Default Title","offer_id":48633785417940,"sku":"BOX-60-5088","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b67b2545-7cc5-4fb0-aa7e-a9147f116668.jpg?v=1788816370"},{"product_id":"jm-products-bs680ig-bond-safe-680-inground-pool-kit","title":"J. M. Products Bond Safe 680 In-Ground Pool Kit, BS680IG","description":"\u003cp\u003eThe J. M. Products BS680IG is the Bond Safe 680 in its in-ground pool form. It is supplied as a kit rather than as a single loose component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering by part number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 680 is offered in more than one configuration, so the part number is what tells the two apart. BS680IG is the in-ground kit. If your pool is an above ground installation, this is not the version you want.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe detail carried on this listing is limited to the model, the part number and the application. If you need the full contents list before you commit, ask us and we will confirm it with the manufacturer.\u003c\/p\u003e","brand":"JM PRODUCTS INC","offers":[{"title":"Default Title","offer_id":48633917210836,"sku":"JMP-57-6801","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/BS680IG_bondsafe.jpg?v=1788817206"},{"product_id":"jacks-multilube-1oz","title":"Hayward Jack's Multilube, 1 oz., SP032712","description":"\u003cp\u003eJack's Multilube in a 1 oz. size, listed under Hayward part number SP032712. It is the small tube of lubricant kept on hand for pool seal work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy o-rings need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery removable lid on a pool system seals on an o-ring: the pump strainer pot, unions, filter and feeder caps. Left dry, those rings grip the housing, stretch when the lid is turned and eventually tear, which turns a routine basket clean into a leak and a parts order. A lubricated ring slides, seats evenly and comes back apart next time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUsing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWipe the o-ring and its groove clean first, then work a thin film over the ring with your fingers. That is all it needs. Extra lubricant does not improve the seal, it just collects grit that will chew the ring.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48633930219732,"sku":"HAY-60-5163","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_03c0f19f-df12-46a8-868f-bd20091e45c2.png?v=1788817434"},{"product_id":"18-round-armor-shield-floor-pad","title":"GL International 18' Round Armor Shield Floor Pad, 70-0018RD-BLK-160","description":"\u003cp\u003eArmor Shield is a floor pad for above ground pools, cut here for an 18' round. It lays between the vinyl liner and the sand or soil base it sits on, and its job is to stop what is underneath the pool from working its way into the liner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeotextile rather than foam\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTraditional floor padding is foam. Armor Shield is a polypropylene geotextile blend instead, a material chosen for puncture resistance rather than cushioning alone. Rocks, roots, grass and even glass in the base are what tear an above ground floor, and the geotextile is what stands between them and the vinyl.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo side benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pad also slows convective heat loss through the floor of the pool, and it gives swimmers a softer, more even surface to stand on than sand alone.\u003c\/p\u003e\u003cp\u003eFit it during the build, before the liner goes in. Once the pool is up and full, adding a floor pad means taking the liner back out.\u003c\/p\u003e","brand":"GLI","offers":[{"title":"Default Title","offer_id":48633933594836,"sku":"AG-LA-1118","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8572bba2-c1a8-4b30-a2f0-7b9f391c7241.jpg?v=1788817640"},{"product_id":"aboveground-pool-wall-foam-1-8x48x60","title":"Gladon Waveless Above Ground Pool Wall Foam, 1\/8 in. x 48 in. x 60 ft., Blue, AG60","description":"\u003cp\u003eGladon AG60 is a roll of Waveless above ground pool wall foam, 60 ft. long by 48 in. wide by 1\/8 in. thick, in blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWall foam goes between the pool wall and the liner. A steel or resin wall is rarely perfectly smooth: there are seams, fasteners, small dents and whatever texture the panel came with, and all of it prints through a liner that is pressed against it by thousands of gallons of water. A layer of foam gives the liner a flat, even surface to lie on and takes the hard edge off the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is liner change work. With the old liner out, the foam is run around the inside face of the wall before the new liner goes in. One roll covers 60 ft. of wall, so measure the circumference of your pool and order enough to go all the way around.\u003c\/p\u003e","brand":"Gladon Company Inc","offers":[{"title":"Default Title","offer_id":48633982419156,"sku":"GAD-60-6160","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a75eaffb-88c7-4036-b6aa-3c1dd55bc6ff.jpg?v=1788823352"},{"product_id":"step-gasket-50-roll","title":"Frank Wall Enterprises Step Gasket, 50' Roll, SG-12550","description":"\u003cp\u003eThis is the Frank Wall Enterprises step gasket, part number SG-12550, supplied as a 50 foot roll.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is supplied\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuying gasket on a roll means you cut the lengths the job actually needs rather than working around fixed pieces. Fifty feet covers a step reseal with material left over, which is why it is a sensible thing to keep on a shelf.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA note on fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGasket material only performs as well as the surface it is pressed onto. Clean both mating faces properly and remove the old gasket and any adhesive residue before you lay the new one, or the joint will weep regardless of how good the gasket is.\u003c\/p\u003e","brand":"Frank Wall Enterprises","offers":[{"title":"Default Title","offer_id":48634006896852,"sku":"FWE-801-7603","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_164e9f4e-c744-42bf-ae59-f11836f3508e.png?v=1788823653"},{"product_id":"dye-refill-8-oz","title":"Anderson Dye Refill for Leak Testers, 8 oz, LD601","description":"\u003cp\u003eThe Anderson LD601 is an 8 oz bottle of leak detection dye, sold as a refill for dye testers. The flip top lid is there so the tester can be recharged without spilling, and one bottle provides approximately 40 refills.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow leak dye works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater leaving a pool through a crack or a bad fitting creates a small local current. Release dye next to that spot and the current pulls it in, which turns an invisible loss into something you can point at. It is the simplest way to confirm a suspected leak at a light niche, a skimmer throat, a return fitting or a hairline crack in the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting a clean result\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe test only works in still water. Turn the pump and any features off, wait for the surface and the body of water to settle, and keep your own movement to a minimum. If circulation is still running, the dye drifts and every spot looks like a leak. Release a small amount at a time and watch it rather than clouding the area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHandling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe dye is made to be seen, which means it will also stain skin, clothing and porous deck surfaces. Work over the water, close the lid between tests and store the bottle upright.\u003c\/p\u003e","brand":"Anderson","offers":[{"title":"Default Title","offer_id":48634029539540,"sku":"AND-60-5007","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d43cd520-04f7-4148-a46a-08dfee25bab1.jpg?v=1788824981"},{"product_id":"pre-filled-dye-leak-tester","title":"Anderson Pre-Filled Dye Leak Tester, DT601","description":"\u003cp\u003eThe Anderson DT601 is a pre-filled dye leak tester for finding where a pool is losing water. It arrives ready to use, with no dye to mix or load.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA dye test works on the fact that water going out through a leak pulls whatever is next to it along. With the pump off and the water as still as you can get it, release a small amount of dye beside a suspected spot and watch. If there is a leak there, the dye moves toward it and disappears into it. If it just drifts and disperses, move on to the next candidate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere to look\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWork through the places that fail most often before opening anything up: liner seams and creases, the skimmer throat, the light niche and its conduit, return fittings, steps and any place the structure changes. Anderson offers a dye refill separately, so the tester keeps earning its place after the first hunt.\u003c\/p\u003e","brand":"Anderson","offers":[{"title":"Default Title","offer_id":48634152386772,"sku":"AND-60-5008","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_07df7570-e50f-4d97-aca7-4fc8ad7b51b5.jpg?v=1788825818"},{"product_id":"silicone-adhesive-10-3oz-12-cs","title":"Boss 10.3 oz Gray 801 Neutral Cure Silicone Adhesive, 02505GY10","description":"\u003cp\u003eBoss 801 is a one part neutral cure silicone adhesive and sealant in a 10.3 oz gray cartridge. It bonds and seals in the same pass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manufacturer lists it for adhering ceramic tile to acrylic, fiberglass, ABS, PVC, wood and masonry, and specifically for sealing spa jets and fittings. It is also used in bathroom tile work, which is the same job in a different room.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy neutral cure\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNeutral cure silicone is low odor and non-corrosive as it sets. That is what makes it suitable against the plastics and composites in a spa shell, where a more aggressive silicone chemistry is a poor neighbor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis cartridge is gray, which sits better against gray grout and darker surrounds than a clear or white bead would.\u003c\/p\u003e","brand":"Accumetric Inc\/ Boss Pool\u0026spa","offers":[{"title":"Default Title","offer_id":48634161496276,"sku":"BOS-60-3021","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_16062805-0126-4cf8-a375-454510f61f45.jpg?v=1788826015"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/repair-supplies.oembed?page=6","provider":"Active Pool Supply","version":"1.0","type":"link"}