{"title":"Return Fittings \u0026 Jets","description":"\u003cp\u003eShop return fittings \u0026amp; jets at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"inlet-fitting-return-line-venturi-jet-white","title":"Infusion Inlet Fitting, Return Line Venturi Jet, White","description":"\u003cp\u003eThe Infusion VRFTHWH is a venturi return fitting, or V-Fitting, in white. It replaces a standard return eyeball and uses a venturi shape to draw in surrounding water as the return flows, sending a larger, stronger stream into the pool from the same pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat that does for the pool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe directional jet lifts sediment off the walls and floor and reaches the corners and dead spots where water normally sits. Chemicals spread more evenly, the filter sees more of the water and there is less brushing and less service time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt works on both in-ground and above ground pools. The white finish matches most standard return fittings, and Infusion offers the same fitting in black and dark gray for pools with darker plaster or liners.\u003c\/p\u003e","brand":"Infusion","offers":[{"title":"Default Title","offer_id":48624968761556,"sku":"55-276-1000","price":20.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_99faab9b-c5f0-4609-88bb-5ba0f2be650b.jpg?v=1788656896"},{"product_id":"eyeball-jet-cap","title":"CMP Pool Eyeball Jet Cap Cover","description":"\u003cp\u003eThe CMP 25552-020-300 is a white threaded cap that takes the place of the eyeball on a pool return fitting. It threads onto most common 1-1\/2 in. MIP directional flow outlets, which covers the standard eyeball returns from Hayward, Pentair, CMP and Polaris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnthread the locking ring from the existing eyeball, remove the eyeball, and thread the cap onto the fitting. No tools are called for beyond what it takes to loosen the ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost pools use it at closing time, sealing each return line as part of winterizing. It also works as a service cap for shutting off one return while the rest of the system runs.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625020076244,"sku":"CTM-25-2082","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1b604032-3b74-460e-ae3f-e47abb5ffc7d.jpg?v=1788662247"},{"product_id":"adjustable-spa-jet-gunite","title":"Waterway Adjustable Spa Jet, Gunite","description":"\u003cp\u003eThe Waterway 210-3400 is the adjustable spa jet in the gunite version. It is the genuine Waterway fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable, and for gunite\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo details define this part. It is the adjustable jet rather than a fixed one, and it is the gunite version rather than the one specified for other wall construction. Match both when you replace a jet, because the wrong version will not seat correctly in the wall fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpas run a set of jets, and they age at much the same rate. Count what you are replacing before ordering so you are not waiting on a second delivery to finish the job.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625847501012,"sku":"WWP-85-8087","price":29.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_88c9944e-05c1-4492-8af6-4d8c9419c042.jpg?v=1788701505"},{"product_id":"poly-gunite-jet-assembly-1-5x2-tee-body","title":"Waterway Poly Gunite Jet Assembly 1.5\" x 2\" Tee Body","description":"\u003cp\u003eThe Waterway 210-3700 is the poly gunite jet assembly with a 1.5 inch by 2 inch tee body. It is the return jet body that gets plumbed into a gunite pool or spa wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tee body is the buried half of the jet. It ties into the return line during the plumbing stage and gives the jet a fixed, sealed home in the shell. The face the swimmer sees, the poly jet internal, threads into the body afterwards and is chosen separately, which is why Waterway lists roto, pulsator and smooth face internals as their own parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis jet is referenced in our source both as 210-3700 and as 210-3700B. If you are matching an existing installation, check the number molded or printed on the body you are replacing.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626104238292,"sku":"WWP-85-8000","price":20.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ae923036-0e7f-4aa5-8b17-c518bd5bd3e9.jpg?v=1788704822"},{"product_id":"3-4-in-hydrostream-eyeball-return-jet","title":"Hayward 3\/4\" HydroStream Eyeball Return Jet, White","description":"\u003cp\u003eThe Hayward SP1419D is a HydroStream directional flow eyeball return jet with a 3\/4 inch opening, finished in white. It is the genuine Hayward fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the eyeball does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe eyeball sits inside the return housing and swivels, which lets you aim the returning water instead of just letting it dump straight out of the wall. Pointing returns to sweep the surface toward the skimmer, or to reach a corner that always collects leaves, is one of the cheapest circulation improvements available on a pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the opening size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 3\/4 inch opening is the largest of the common HydroStream sizes. A smaller opening throws water further and agitates the pool more aggressively, but adds head to the system. Hayward makes the same fitting with 3\/8 inch and 1\/2 inch openings if you want more velocity out of the same return line.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48626210799828,"sku":"HAY-25-1546","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_de3ce732-98ee-43cc-b290-e9735a3a5dad.gif?v=1788706144"},{"product_id":"eyeball-inlet-assy-1-25-gray","title":"Pentair 8428-7 Gray Inlet Eyeball Replacement Kit","description":"\u003cp\u003ePentair 08428-0001B, listed as the 8428-7, is the gray inlet eyeball replacement kit. It comes complete with the screw, the face plate, the ball and four nozzles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the eyeball does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe return inlet is where filtered water comes back to the pool, and the eyeball is what aims it. Point it correctly and the whole pool turns over; leave it stuck or broken and you get dead corners, poor chemical distribution and debris that settles where the water never reaches. The ball swivels in the face plate so the jet can be set wherever the pool needs it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe four nozzles\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach nozzle has a different outlet size. A smaller opening throws harder and further, a larger one moves more volume with less velocity. Having all four in the kit means the return can be tuned to the pool rather than left as it came.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48626493849812,"sku":"STA-251-2832","price":48.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fe745470-bb32-4b90-beab-93d118135977.jpg?v=1788710923"},{"product_id":"2-x-1-5-white-return-diverter-plate","title":"AquaStar 2 in. x 1.5 in. White Return Diverter Plate","description":"\u003cp\u003eThe AquaStar DIV0101 is a white return diverter plate sized 2 in. by 1.5 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA return is the fitting that puts filtered water back into the pool, and where that water is aimed decides how well the pool circulates. Almost every pool has a spot the flow never reaches, usually a corner, the far end of a bench or the space under the steps, and that is exactly where fine debris settles and algae takes hold. A diverter plate turns the return flow so the current sweeps those areas instead of running straight down the middle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 2 in. by 1.5 in. plate in white. Check the size of the fitting you are working with before ordering, since diverter plates are made in more than one size.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48626594087124,"sku":"API-25-9913","price":16.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f2e77985-2757-4bcf-9759-ba04a3ee262b.jpg?v=1788712836"},{"product_id":"waterway-plastics-wall-fitting-escutcheon-gray-in-ground-pool-vinyl-liner-return-fittings","title":"Waterway Wall Fitting Escutcheon, Gray, for In-Ground Vinyl Liner Return Fittings","description":"\u003cp\u003eThe Waterway 218-1447 is the gray escutcheon for in-ground vinyl liner pool return wall fittings, part of the eyeball return fitting assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe escutcheon is the ring you actually see from inside the pool. It sits over the wall fitting and finishes the opening in the liner, hiding the joint and giving the return a clean face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it gets replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEscutcheons take the worst of the sun and the chemistry while doing none of the work. They chalk, yellow and crack years before the fitting behind them gives any trouble, so swapping the trim ring is usually all a tired looking return needs. This is the gray version, so match it to the rest of your return hardware.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626863407316,"sku":"WWP-85-8222","price":6.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/218-1447-eyeball-fitting-escutcheon-gray.jpg?v=1788716004"},{"product_id":"roto-deluxe-jet-white","title":"Waterway Roto Deluxe Jet, White","description":"\u003cp\u003eThe Waterway Roto Deluxe Jet in white is Waterway part number 210-6090.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpa and pool jets are matched to the fitting body already set in the shell, so the safest way to buy is by part number. If the jet you are pulling out is a 210-6090, this is its replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJets take the brunt of chemistry and sunlight. They scuff, dull and discolor long before the plumbing behind them needs attention, and swapping the internal is a quick way to freshen the look of a spa or pool wall.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627001229524,"sku":"WWP-85-8009","price":32.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7a63170e-6b94-41a4-972a-06708e621243.jpg?v=1788718924"},{"product_id":"spamaster-2in-insider-jetintdir-ss-wht","title":"CMP SpaMaster 2\" Insider Jet Internal, Directional, Stainless Steel, White","description":"\u003cp\u003eThe CMP 25591-110-000 is a SpaMaster 2 inch Insider jet internal, supplied in the directional stainless steel and white configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat an internal is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wall fitting body is glued into the shell and stays there. The internal is the visible part that drops into it and does the work of shaping the stream. Replacing an internal is a job you do by hand at the wall, with no plumbing to touch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJet internals are matched to their bodies and to the size of the jet, so ordering to the part number is the only reliable way to buy. This listing is the 2 inch directional SpaMaster Insider, part 25591-110-000.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627004440788,"sku":"CTM-85-0118","price":22.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_61667802-1a50-48de-847d-16dc7a89830e.jpg?v=1788718962"},{"product_id":"insider-1-1-2x-2-wht","title":"CMP Wall Return Fitting, 1.5\" FIP x 2\" Insider Fitting, White","description":"\u003cp\u003eThe CMP 25524-200-000 is a white wall return fitting with a 1-1\/2 inch FIP port facing the pool and a 2 inch connection behind it, listed for gunite construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it sits in the wall\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe return fitting is the piece cast into the pool wall that the return line lands on. The threaded pool side is what an eyeball, a directional fitting or a plug threads into, and the back is what the plumbing joins to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the 2 inch end\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 2 inch side is described two different ways in the manufacturer data: as an insider fitting, which goes inside the pipe, and as a socket, which takes the pipe inside it. Those are opposite joints, so measure and look at the pipe stub at your wall before ordering or gluing rather than assuming either one.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627007422676,"sku":"SPG-25-0010","price":6.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/25524-200-000.jpg?v=1788719002"},{"product_id":"eyeball-fitting","title":"Polaris Genuine OEM Eyeball Fitting","description":"\u003cp\u003ePolaris 6-511-00 is the genuine universal wall eyeball fitting, a molded plastic fitting that seats in any Polaris wall fitting collar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe problem it solves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen the Polaris comes out of the pool, the wall port it plugs into is left as an open hole in the wall. Drop the eyeball fitting in and the port looks like every other return jet in the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt goes into the Polaris universal wall fitting collar already installed in the wall, so no collar change is needed. It comes back out when the cleaner goes back in.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48627211796692,"sku":"POL-201-2754","price":29.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1a1687ec-d5dd-4924-8e14-a31f013d635f.jpg?v=1788720103"},{"product_id":"7-nozzle-jet-int-poly-massage-deluxe-blk","title":"Waterway Deluxe 7-Nozzle Scalloped Large Face Massage Poly Jet Internal, Black","description":"\u003cp\u003eThe Waterway 210-6701 is a deluxe massage poly jet internal in black, with seven nozzles behind a scalloped large face. It is the internal only, designed to fit a poly jet body already installed in the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the seven nozzles do\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single nozzle jet concentrates its flow in one place. This one splits the same flow across seven nozzles behind a large face, which spreads the massage over a wider area and softens the point pressure. The scalloped trim ring is the visible part at the wall, and its finish sets the look of the jet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing the internal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJet internals take the abuse while the buried plumbing stays untouched. Sun and pool chemistry dull the face, scale locks up the nozzle movement, and trim rings crack. Because the internal is a separate piece from the wall fitting, a jet can be brought back to new condition without opening anything up. Match the black finish across the rest of the jets so the wall stays consistent.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627595608276,"sku":"WWP-85-7005","price":37.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_73e20bcf-c76e-4437-88a5-7b10b6677a86.jpg?v=1788724049"},{"product_id":"return-inlet-gasket-vinyl-liner-1-5","title":"Hayward Return Inlet Gasket, Vinyl Liner 1.5\"","description":"\u003cp\u003eThe Hayward SPX1408C is the vinyl inlet face plate gasket, the flat gasket that seals a 1.5 inch return inlet against a vinyl liner. It is used on the Hayward SP-1408 inlet and on other fittings built to the same pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe measurements\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOutside diameter is 3-3\/8 in. The center hole is 2-5\/32 in and carries a notch, so the gasket seats one way only. Four outside holes measure 3\/16 in and sit 2-1\/2 in from the hole opposite, measured at the center line. If your existing gasket matches those numbers, this is the right part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA face plate gasket that has gone hard, flat or torn will let water track behind the liner at the fitting. It is a cheap part to renew any time the return face plate comes off, and far cheaper than chasing the leak later.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627618873556,"sku":"HAY-251-1968","price":13.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_eff9719c-ea99-4a7f-a7cf-ebb97145751b.jpg?v=1788725415"},{"product_id":"aquamoto-white-3-4-eyeball-pack-of-6-with-installation-tool","title":"Aquamoto White 3\/4\" Eyeball Pack of 6 with Installation Tool","description":"\u003cp\u003eThis Aquamoto pack contains six white directional flow eyeball inlet jets with a 3\/4 inch opening on a 1-1\/2 inch MIP thread, plus one installation tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCirculation you can aim\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn eyeball fitting swivels inside the return, so each jet can be pointed deliberately. Angled correctly, the returns sweep the surface toward the skimmer and keep the deep end from going stagnant. Pointing them straight out into open water wastes most of that effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the tool matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEyeballs seat tightly and get stiff with age. The included tool grips the fitting properly so you can set it or free it without cracking the ring or chewing up the face. The set cross references to 400-1410D, 540021 and SP1419D.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627734806740,"sku":"AQM-25552-300-000-MF","price":26.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_92ab259a-3a09-4cf9-aa58-fac1d4a83289.jpg?v=1788727488"},{"product_id":"1-1-2-wall-fitting-with-locknut-gaskets-threaded","title":"Hayward 1-1\/2 Inch FIP Return Inlet Fitting with Locknut and Gasket","description":"\u003cp\u003eThe Hayward SP1023 is the threaded wall return inlet fitting for vinyl liner and above ground pools, supplied complete with its locknut and gaskets. The connection is a 1-1\/2 inch female inside pipe thread, and the fitting is white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it goes in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe fitting passes through a 2-1\/4 inch diameter hole in the pool wall. Gaskets sit either side of the wall and the locknut draws the assembly up tight, which is what makes the joint watertight. On the plumbing side, a threaded pipe or a male adapter screws into the female thread.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuying the whole fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the kit includes the locknut and gaskets, this is the part to order when the fitting body is cracked, cross threaded or missing. If the body is sound and only the seal has hardened, the rubber gaskets are available separately as a pair.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627747946708,"sku":"HAY-25-1505","price":15.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_22256555-9bef-4e2d-8917-b24aea23f780.gif?v=1788727698"},{"product_id":"hayward-sp1408s2dgr-2-skt-dark-grey-return-fitting-for-vinyl-pools","title":"Hayward 2\" SKT Dark Gray Return Fitting for Vinyl Pools","description":"\u003cp\u003eThe Hayward SP1408S2DGR is a return fitting for vinyl pools with a 2 inch socket connection, finished in dark gray. It is the wall port that filtered water passes back through on its way into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe fitting is built for a vinyl lined wall and takes 2 in pipe on the socket side. Dark gray is the DGR variant in the part number, which is the choice when the liner pattern or the surrounding trim is dark rather than white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does for circulation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReturns are the last step in the loop. Water leaves the skimmer and main drain, moves through the pump, the filter and any heater or sanitizer, then comes back to the pool through fittings like this one. A cracked or leaking return is worth changing promptly, because it sits on the pressure side and will keep pushing water behind the liner.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627848741076,"sku":"HAY-25-7050","price":19.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a6babfbe-0569-45af-8f1a-9d546878e68d.jpg?v=1788728231"},{"product_id":"3-8-hydrostream-eyeball-return-jet","title":"Hayward 3\/8\" HydroStream Eyeball Return Jet, White","description":"\u003cp\u003eThe Hayward SP1419B is a HydroStream directional flow return jet with a 3\/8 inch opening, finished in white. It threads into a standard 1-1\/2 inch MIP return fitting and replaces a worn or missing eyeball.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe 3\/8 inch opening\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe opening size sets how the water leaves the wall. At 3\/8 inch the stream is narrow and fast, which reaches further across the pool. Hayward makes the same HydroStream in larger openings, so pick the size by how much reach you want against how much back pressure you are willing to add.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAiming it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe eyeball is fully adjustable and pivots to direct flow anywhere in the pool. Getting the returns pointed correctly is the simplest way to fix a pool with dead corners or one where debris always settles in the same place, and it costs nothing in pump energy.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627854737620,"sku":"HAY-25-1544","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e8796281-0f3d-4148-8a3d-937c193fb22e.gif?v=1788728396"},{"product_id":"1-2-hydrostream-eyeball-return-jet","title":"Hayward 1\/2\" HydroStream Eyeball Return Jet, White","description":"\u003cp\u003eThe Hayward SP1419C is the genuine HydroStream directional flow return jet in white, the eyeball fitting that sits in the pool wall where the return line enters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the eyeball matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA return that points straight out sends clean water across the middle of the pool and leaves the corners, the steps and the shallow end turning over slowly. The HydroStream eyeball swivels, so you can aim each return down and along the wall and set up a circular flow that reaches the whole pool. Better circulation means chemicals distribute properly and the spots where algae normally takes hold get moving water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis item is listed as the 1\/2 inch HydroStream, with its opening given as 3\/8 inch. Hayward makes the same fitting in other opening sizes, so if the throw of an existing jet is what you are trying to match, order by part number.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627861455060,"sku":"HAY-25-1545","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_56928ccc-4a30-4f04-be66-8b32aa34d5cd.jpg?v=1788728548"},{"product_id":"return-inlet-sp1408-faceplate","title":"Hayward Return Inlet SP1408 Faceplate, White","description":"\u003cp\u003eThe Hayward SPX1408B is the white faceplate for the SP1408 return inlet. It is the round trim plate that finishes the wall return, with four evenly spaced screw holes on the front and four slots on the back side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes and hole pattern\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate is 3-9\/16 inch across the outside, 2 inch across the inside, and 5\/16 inch thick. The four screw holes are 1\/4 inch and are countersunk to 15\/32 inch so the heads finish flush. Measured on the center line, one hole sits 2-9\/16 inch from the hole opposite it, which is the fastest way to check an old plate against this one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIdentifying what you have\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward stamps SP1408-B into the back side of the plate, just inside the center hole. If the plate on the pool wall carries that stamp, this is the replacement. The listing covers the faceplate alone; the four screws are a separate set.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627888685268,"sku":"HAY-251-1967","price":6.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b0fa844f-008f-407e-bde6-f2e60a7f1c01.jpg?v=1788729646"},{"product_id":"inlet-fitting-1-5slip-whtfg","title":"Pentair 1.5\" Threaded x 1.5\" Socket Long Body Return Fitting for Fiberglass, White","description":"\u003cp\u003eThe Pentair 542411 is a long body return fitting for fiberglass pools and spas, with a 1-1\/2 inch threaded end and a 1-1\/2 inch socket end, in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a long body\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard return fitting is sized for a wall it can reach through comfortably. Fiberglass shells and spa walls are built differently, and the long body version gives the extra reach needed to land properly and seal. Using the right length is what keeps the fitting from stressing the shell or leaking behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReturn fittings crack with age, freeze cycles and over tightening. A slow loss at the return is easy to blame on evaporation until the water line keeps dropping. Swapping the fitting is a straightforward repair compared to chasing a leak elsewhere in the plumbing.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627946586324,"sku":"PAC-25-1648","price":21.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_31e2127a-1f38-4cda-b7a8-5f091370856f.jpg?v=1788730553"},{"product_id":"above-ground-wall-fitting-w-locknut-gaskets","title":"Hayward Above-Ground Wall Fitting with Locknut and Gaskets","description":"\u003cp\u003eThe Hayward SP1023G is the threaded wall fitting that carries filtered water back into an above ground pool. It comes with the locknut and the gaskets, so the whole through wall assembly is in one box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe fitting passes through the pool wall and is clamped by the locknut, with a gasket on each face so the wall is sandwiched between them. That is what keeps water on the inside of the liner instead of running down the outside of the pool. When those gaskets harden with age, the return starts to weep, and replacing the fitting and gaskets as a set is the reliable fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat threads into it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause the inlet is threaded, a return eyeball fits in during the season and a threaded plug goes in for winterizing. Fitting and unfitting either one does not disturb the wall seal.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627947798740,"sku":"HAY-25-1702","price":20.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_74921f19-f716-4366-ae14-c4975ed6fb63.jpg?v=1788730598"},{"product_id":"rubber-flow-director","title":"Hayward Rubber Flow Director","description":"\u003cp\u003eThe Hayward SPX1420A1 is the rubber flow director that fits inside a 1 inch eyeball return fitting. It is the genuine Hayward part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe director sets the direction and shape of the water coming out of a return. Aiming returns is how circulation is controlled: point them well and the whole pool turns over, point them badly and water stalls in the corners where debris and algae then settle. The rubber body flexes to the angle you set and stays there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eShut the pump down and wait for flow to stop. Loosen the locking ring, remove the eyeball fitting, then push the director into the return from behind until it pops into place. Refit the eyeball, tighten the ring and start the pump to check the aim before you walk away.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuying options\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the eyeball itself is also worn, the same director is available as an assembly with a 1 inch eyeball return nozzle.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627975586004,"sku":"HAY-251-1979","price":16.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f01f9608-6a72-432b-ac1f-95544dbb7abd.jpg?v=1788732085"},{"product_id":"gunite-spa-jet-puls-1-5in-mpt-gy-ss","title":"CMP Spa Master 1.5\" Gunite Jet Internal Pulsator, Stainless Steel\/Gray","description":"\u003cp\u003eThe CMP 23315-031-200 is a Spa Master gunite jet internal with pulsator action, finished in gray with a stainless steel face. It threads into a standard 1.5 inch wall fitting, which is what makes it a straightforward way to add therapy jets without opening up the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost pool and spa returns are a plain directional eyeball. That moves water but it does nothing for you if you are sitting in front of it. Swapping the internal for a Spa Master pulsator gives that same return a massage style output, using the plumbing that is already there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe internal carries 1.5 inch MPT threads and screws into any standard 1.5 inch FPT wall fitting. This is the gunite version, sized for a concrete shell. If you want more from the jet, CMP pairs these with venturi tees or a JetArray 2x2 cluster.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48627978240212,"sku":"CTM-85-0130","price":32.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6566e831-1950-4125-831a-0d827632c701.png?v=1788732164"},{"product_id":"inlet-fitting-1-5slip-wht-c","title":"Pentair 1.5 inch Threaded x 1.5 inch Socket Standard Body Return Fitting for Concrete, White","description":"\u003cp\u003eThe Pentair 542405 is a standard body return fitting for gunite and concrete pools, with a 1-1\/2 inch threaded connection on one side and a 1-1\/2 inch socket on the other, finished in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReturn fittings are the last piece in the circulation loop. Water leaves the filter, travels back through the return line and enters the pool through this fitting at the wall. The threaded end takes the plumbing, the socket end accepts pipe, and the visible body is what you see standing in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSun and chemistry make wall fittings brittle and chalky over the years, and a cracked body is worth changing rather than living with. The two different connection types on this fitting are what let it adapt to how the return line was originally run, so match both sides against what you are removing.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628740227284,"sku":"PAC-25-1650","price":16.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1bfd2c1c-e7aa-41c9-9448-bef732b882b1.jpg?v=1788749495"},{"product_id":"face-plate-threaded","title":"Hayward Threaded Face Plate for SP1411 Vinyl Liner Inlet Fitting","description":"\u003cp\u003eThe Hayward SPX1411B is the threaded face plate for the SP1411 vinyl liner inlet fitting. It is the 4 hole old style plate, molded in white ABS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it goes together\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate is the visible piece on the pool side of a vinyl liner return. It has 1.5 inch female threads on the inside, and the eyeball screws into those. The back of the plate is completely flat, with 2 partial holes, and that flat face is what clamps against the liner and gasket when the four screws are drawn up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirming the pattern\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere is more than one faceplate pattern in circulation, so measure before ordering. This one is 3-9\/16 inch outside diameter, 1-3\/4 inch inside diameter and 9\/32 inch thick. The four screw holes are 1\/4 inch with 15\/32 inch countersinks, evenly spaced, and opposite holes sit 2-7\/16 inch apart centerline to centerline.\u003c\/p\u003e\u003cp\u003eIf the old plate has cracked around a screw hole or gone brittle in the sun, replacing it is a liner side job that does not disturb the fitting behind it.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628773388500,"sku":"HAY-251-1969","price":15.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_29386c9d-af99-4afb-8881-ba61eb707bf5.jpg?v=1788750455"},{"product_id":"aquamoto-6-pack-white-1-eyeball-jets-1-1-2-thread-fittings-with-installation-tool","title":"Aquamoto White 1\" Eyeball Jets, 1-1\/2\" Thread, 6 Pack with Installation Tool","description":"\u003cp\u003eThese are Aquamoto white eyeball jet fittings with a 1 inch opening and the standard 1-1\/2 inch thread, supplied six to a pack with an installation tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat an eyeball does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe eyeball sits in the return and lets you aim the water. Point them so the surface turns over toward the skimmer and the pool clears debris on its own instead of leaving it in corners. Old eyeballs go brittle, crack around the ball and stop holding an angle, and a pack of six is usually the sensible way to buy them because the whole set tends to age together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes and finishes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis pack is the white 1 inch version. Aquamoto also lists a 1\/2 inch directional flow jet and black versions of both, each under its own part number.\u003c\/p\u003e","brand":"Aquamoto","offers":[{"title":"Default Title","offer_id":48628784365780,"sku":"AQM-25552-400-000","price":33.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_687d8902-3e6e-4fe8-888a-3be1d0da183f.jpg?v=1788750643"},{"product_id":"insider-1-1-2x-2-gry","title":"CMP Insider Wall Return Fitting, Gray","description":"\u003cp\u003eThe CMP 25524-201-000 is an Insider wall return fitting in gray, made by Custom Molded Products. It seats into the return outlet in the pool wall and provides a threaded port for an eyeball or a directional return nozzle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the size first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source data for this item is not consistent about the inlet thread. The listing title describes it as a 1.5 inch FIP by 2 inch Insider fitting, while the product description gives it as a 2 inch FIP by 2 inch socket. Both readings are carried here rather than picking one. Measure the fitting in the wall, or ask us to confirm the exact size, before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does not include\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe fitting is supplied on its own. The eyeball or directional nozzle that threads into it is a separate part, so order that alongside if you are replacing the whole return.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48628786462932,"sku":"CTM-25-2025","price":6.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CTM-25-2025_1a.png?v=1788750682"},{"product_id":"insider-1-1-2x-2-blk","title":"CMP Wall Return Fitting, 1.5\" FIP x 2\" Insider Fitting, Black","description":"\u003cp\u003eThe CMP 25524-204-000 is a black wall return fitting with a 1-1\/2\" FIP connection and a 2\" pool side, listed for gunite pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe return fitting is the piece at the pool wall that filtered water comes back through. It threads onto the return line and finishes the penetration on the inside of the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur source describes the 2\" end in two ways, as an insider fitting and as a socket. Measure what is in the wall now, or pull the old fitting and take it with you, rather than ordering from the pipe size alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBlack hardware disappears into dark plaster, pebble and tile finishes in a way white fittings never do. On a pool that has been resurfaced dark, changing the returns over is a small detail that makes the finish look finished.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48628811006164,"sku":"SPG-25-0011","price":8.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/25524-204-000.jpg?v=1788752225"},{"product_id":"inlet-fitting-return-line-venturi-infusion-light-gray","title":"Infusion Inlet Fitting, Return Line Venturi, Light Gray","description":"\u003cp\u003eThe Infusion VRFTHLG is a venturi driven return line inlet fitting in light gray. It replaces a standard return fitting in the pool wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow a venturi fitting works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA plain eyeball fitting simply aims whatever water the pump pushes through it. A venturi fitting is shaped so that the water leaving the return draws additional pool water in alongside it, which means more water moves for the same pump output. The result is a stronger, more directional stream than the same pump produces through a conventional fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat that changes in the pool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStronger directional flow reaches the side walls and the floor, disturbing sediment before it has a chance to settle. It also spreads sanitizer through the whole body of water instead of concentrating it near the returns, so the chemicals you add do more of the work. Dirt that stays suspended reaches the skimmer and the filter, which is where you want it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the light gray version. Infusion offers the venturi return fitting in more than one color, so choose the one that suits your other wall fittings and interior finish.\u003c\/p\u003e","brand":"Infusion","offers":[{"title":"Default Title","offer_id":48628812939476,"sku":"IFP-25-1002","price":20.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a9496059-8ebc-4027-8dcb-8595bf7ed578.jpg?v=1788752303"},{"product_id":"6-pack-aquamoto-grey-1-directional-flow-eyeball-inlet-jet-standard-1-1-2-thread-pack-of-6-fittings-with-installation-tool","title":"Aquamoto Grey 1\" Directional Flow Eyeball Inlet Jet, Standard 1-1\/2\" Thread, 6 Pack with Installation Tool","description":"\u003cp\u003eThis is a six pack of Aquamoto grey directional flow eyeball inlet jets with a 1 in. opening and a standard 1-1\/2 in. thread, supplied with an installation tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a directional eyeball does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReturn fittings are how a pool actually circulates. A directional eyeball lets you aim each return, so you can push surface debris toward the skimmer and keep water moving in the corners instead of letting it sit. A 1 in. opening narrows the flow and raises the exit velocity, which reaches further across the pool than a wide open return.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoing the whole pool at once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEyeballs go brittle and discolor with sun and chemicals, and a pool that needs one usually needs all of them. Six fittings covers most residential pools in a single job, and the included tool seats each eyeball squarely and gets the old ones out without chewing up the wall fitting.\u003c\/p\u003e","brand":"Aquamoto","offers":[{"title":"Default Title","offer_id":48628833419476,"sku":"AQM-25552-407-000-MF","price":29.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1f255236-42d5-4b56-9852-703c43b046e4.jpg?v=1788753682"},{"product_id":"waterway-spa-rotating-therapy-massage-jet","title":"Waterway Rotating Therapy Massage Jet, 1-1\/2 inch MPT, Dark Gray","description":"\u003cp\u003eThe Waterway 212-9179-DKG is a rotating therapy massage jet assembly with a 1-1\/2 inch MPT connection, finished in dark gray. It comes from Waterway Plastics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the rotating jet works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard jet pushes water in one direction and holds it there. This one has a face that turns under flow, so the stream sweeps rather than sits. That moving pattern is what people are after in a therapy seat, and it is why the rotating jets usually end up in the shoulder and back positions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching what you have\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway builds this jet in more than one finish, and the suffix on the part number is the color. DKG is dark gray. If you are replacing one jet out of a bank, order the same suffix or the odd one will be obvious as soon as the spa is filled.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48628880539860,"sku":"WWP-85-8095","price":27.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/212-9179-dkg-spa-rotating-therapy-fitt-pulsator-1-12mpt.jpg?v=1788756912"},{"product_id":"massage-spa-jet-internal-1-1-2-gray","title":"CMP Massage Spa Jet Internal, 1-1\/2 Inch Gray","description":"\u003cp\u003eThe CMP 23315-241-000 is the Spa Master massage therapy jet internal in gray, with a 1-1\/2 inch MPT connection. It is made by Custom Molded Products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInternal, not the whole jet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa jet is built in two parts. The wall fitting is plumbed into the shell and stays put. The internal is the visible face and nozzle that drops into it, and it is the piece that wears, discolors or stops swirling. This listing is the internal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInternals are made to be serviced. In most spas the old one twists free of the wall fitting by hand and the new one goes back the same way. Confirm the size before you order, since a single spa often runs more than one jet size, and match the gray color to the rest of the trim.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48628888535252,"sku":"CTM-85-2094","price":33.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_51de473a-781f-495d-8fb8-5e2ba54155ce.jpg?v=1788756951"},{"product_id":"hydrostream-jet-fitting-slotted-black","title":"Hayward Hydrostream Jet Fitting Slotted, Black","description":"\u003cp\u003eThe Hayward SP1419ABLK is the slotted Hydrostream jet fitting in black. It threads into a standard return line on 1-1\/2 inch MIP and narrows the outlet to 3\/8 of an inch, which turns a broad return flow into a directed stream.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSetting up circulation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReturn fittings do more than put water back in the pool. Aimed properly they drive the whole circulation pattern, pushing surface debris toward the skimmer and keeping dead spots from forming in corners and behind steps. This fitting is fully adjustable, so the direction can be set once the pump is running and the effect can be seen.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBlack suits dark tile and dark interior finishes, where a white fitting stands out. The same slotted Hydrostream is available in white for lighter pools, listed separately.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628947452116,"sku":"HAY-25-7033","price":8.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9867f0b0-46ba-4112-8ba3-ca64bd726111.jpg?v=1788758345"},{"product_id":"vinyl-return-faceplate-kit","title":"CMP Replacement Hayward SPX1408B White Vinyl Inlet Fitting Face Plate with Screws and Gaskets","description":"\u003cp\u003eThe CMP 25545-100-000 is a white vinyl liner return faceplate kit, supplied with the faceplate, two gaskets and four screws. It replaces the Hayward SPX1408B face plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the kit matters more than the plate\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate is the visible part, but the seal is what the job depends on. A vinyl liner return is sandwiched between two gaskets, one on each side of the liner, held by the screws through the plate. When a return starts weeping behind the wall, the gaskets are almost always the reason, and buying the plate alone leaves you back at the same place. This kit covers all of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBring the plate up square, get both gaskets seated, and run the four screws down in a cross pattern. Snug is enough. Over tightening is the one thing that turns a small job into a large one, because the plate cracks and the liner tears at the holes.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48629100150996,"sku":"CTM-251-1403","price":13.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2587c30a-b529-47ac-96b3-f4d8e647e041.jpg?v=1788759680"},{"product_id":"fiberglass-return-fitting-gray","title":"CMP Fiberglass Return Fitting, Gray","description":"\u003cp\u003eThis is the CMP fiberglass return fitting in gray, part number 25523-701-000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a return fitting does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe return is where water that has been through the pump, filter and heater comes back into the pool. The fitting is the visible piece in the wall at that point, and it is what shapes and aims the flow coming in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReturn fittings are not universal. This one is the fiberglass pool version in gray, so compare it against what you are taking out to confirm the type and the color match.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48629156970708,"sku":"CTM-251-9100","price":18.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/CTM-251-9100_1a.png?v=1788760011"},{"product_id":"3-4-hydrostream-ftg-dk-gry","title":"CMP 1.5\" MPT Dark Gray Hydrostream Fitting with 3\/4\" Opening","description":"\u003cp\u003eThe CMP 25552-307-000 is a dark gray Hydrostream return fitting with a 1.5\" MPT thread and a 3\/4\" opening. It threads into a standard wall fitting and shapes the water coming back into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the opening size changes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA smaller opening restricts the return and raises the speed of the stream leaving it. That extra velocity is what carries circulation to the far end of a pool. The 3\/4\" size is the tighter of the common options, so it is the one to reach for when water is stagnating in corners or on the far wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 1.5\" MPT thread matches standard female wall fittings, and the change is usually done by hand with no plumbing work. The dark gray finish suits pools where a white fitting would be conspicuous against the interior.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48629266120916,"sku":"SPG-25-0229","price":11.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_660e5518-b6d6-490c-b5dd-48eacb9bdeb7.png?v=1788761773"},{"product_id":"cmp-25524-207-000-insider-wall-return-fitting-2-inch-fip-x-2-inch-socket-dark-gray","title":"CMP Insider Wall Return Fitting, Dark Gray","description":"\u003cp\u003eThe CMP 25524-207-000 is an Insider wall return fitting in dark gray. It is the point where filtered water comes back into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the Insider line is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCMP Insider fittings set into the pool wall so that the visible face finishes level with the surface rather than standing proud of it. That matters on gunite and tile work where a fitting that sticks out is both a snag point and an eyesore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne thing to confirm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe size on this part is inconsistent across the sources we have. One reading gives a 1.5 inch female pipe thread inlet with a 2 inch Insider outlet; the other gives 2 inch female pipe thread with a 2 inch socket. The outlet side is the same either way, and the thread is what changes. If your return line is plumbed one way and not the other, contact us to confirm before ordering rather than guessing.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48629275623636,"sku":"CTM-25-2020","price":6.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/25524-200-000-gunite-fitting.jpg?v=1788761829"},{"product_id":"poly-gunite-jet-wall-fitting-only-white","title":"Waterway Poly Gunite Jet Wall Fitting, White","description":"\u003cp\u003eThe Waterway 215-1070 is the poly gunite jet wall fitting in white. It is the wall side face of the return jet, the piece filtered water comes back into the pool through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing covers the wall fitting itself. The tee body that sits behind the wall, the 1.5 inch by 2 inch poly gunite jet assembly, is a separate Waterway part. If your plumbing is intact and only the visible face is damaged, the fitting on its own is all you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGunite construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe poly gunite range is designed for concrete and gunite shells, where the fitting is set into the wall as part of the structure. Vinyl liner pools use a different style of return fitting that seals against the liner, so confirm which type of pool you have before ordering this one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the white version. Waterway lists the same fitting in gray and black if you are matching existing hardware rather than replacing a white one.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48629282570452,"sku":"WWP-85-8091","price":7.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_daf3f1bc-cb7f-4e35-986e-e69c6ff6b5d8.gif?v=1788761899"},{"product_id":"ss-white-double-double-roto-internal-jet","title":"CMP SpaMaster White Double Double Roto Internal Jet","description":"\u003cp\u003eThe CMP 25591-130-000 is the SpaMaster 2 inch double double roto internal jet, listed in white with stainless steel. It is the internal only, the part that drops into a jet body already set in the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat roto means\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA roto internal spins as water flows through it, so the stream sweeps around rather than pounding one spot. Double roto multiplies that action. It is the difference between a jet that feels like a jet of water and one that feels like a massage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy internals get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe spinning surface is a wear point. Scale, grit and time eventually stop the nozzle turning, and once a roto jet stops rotating it is just a directional jet. Replacing the internal restores the action without touching the plumbing, since the body stays in the wall.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48629287387348,"sku":"CTM-85-0511","price":28.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/cmp-25591-130-000-ss-white-double-double-roto-internal-jet.jpg?v=1788761968"},{"product_id":"cmp-25523-700-000-1-1-2-socket-x-2-spigot-white-fiberglass-wall-fitting-and-flush-eyeball","title":"CMP 1-1\/2\" Socket x 2\" Spigot White Fiberglass Wall Fitting and Flush Eyeball","description":"\u003cp\u003eThe CMP 25523-700-000 is a white wall return fitting supplied with a flush eyeball, for fiberglass pool walls. One side is a 1-1\/2 inch socket and the other a 2 inch spigot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe eyeball is part of it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReturn fittings are often sold as a body and an eyeball you buy separately, and it is easy to end up with one and not the other. This listing is both. The eyeball is the flush type, so it seats into the face of the fitting rather than projecting into the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck both ends\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe two connection sizes are different, which is normal for a fitting like this but is worth measuring twice. Confirm the 1-1\/2 inch socket and the 2 inch spigot both suit the run you are tying into, and confirm the wall type: this is the fiberglass version.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48629290598612,"sku":"CTM-251-9099","price":15.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6cf323be-adc0-4ec3-8c90-c90b68133b8a.jpg?v=1788762004"},{"product_id":"face-plate-grate","title":"Hayward Face Plate Grate, 4 Inch Round","description":"\u003cp\u003eThe Hayward SPX1425C is the face plate grate for a pool wall fitting, listed at 4 inch round. It is the genuine Hayward replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the visible face at the pool wall. It covers the fitting body behind it and gives the opening a finished edge. When one cracks, chips or goes missing, what is left is a rough hole in the wall that snags fingers and toes, so it is worth replacing even though the pool still runs without it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTake the old grate off and measure it across the face. Hayward lists this one at 4 inch round, and wall fittings are made in several diameters, so a quick measurement saves a return. Hayward catalogues this part under both return jets and skimmer parts, so compare your old grate to the photograph as well.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48629535178964,"sku":"HAY-251-1981","price":12.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c70bbf83-d173-4def-a3c4-47675c96ede3.jpg?v=1788766240"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/return-fittings-jets.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}