{"title":"Skimmer Parts","description":"\u003cp\u003eShop skimmer parts at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"skimmer-basket-oem","title":"Hayward Genuine OEM SP1082 Skimmer Basket","description":"\u003cp\u003eThe Hayward SPX1082CA is the genuine replacement basket for Hayward SP1082, SP1083, SP1084 and SP1085 in-ground skimmers. It sits in the skimmer throat and catches leaves, bugs and grit before they reach the pump strainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShape and size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket is cylindrical from top to bottom, 7 in. across the top outside, 6-1\/2 in. across the bottom outside and 5 in. tall. A lip at the top makes the rim slightly wider than the body and holds the basket at the right height in the skimmer. If you are unsure of your skimmer model, those three measurements against your old basket are the quickest way to confirm the fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer baskets crack at the rim and split along the mesh after a few seasons of sun and handling. A cracked basket lets debris through to the pump basket and, eventually, the impeller. Swapping in a new one takes seconds and needs no tools.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624876945620,"sku":"HAY-251-1911","price":23.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_dce7dbdf-b78b-44be-8ccc-bd512d6ab552.png?v=1788648468"},{"product_id":"hide-12-pool-deck-skimmer-lid-kit-2-25x2-5","title":"Hide 12\" Pool Deck Skimmer Lid Kit, 2-1\/4\" to 2-1\/2\" Material Depth (6 cm)","description":"\u003cp\u003eThe Hide HSL12-2.5 is a 12 in. square skimmer lid kit built to be filled with your own deck material. Instead of a plastic lid interrupting the paving, the tray carries a cut paver, stone, tile or a pour of concrete, and the skimmer opening blends into the deck around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDepth matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHide sells the cover in several depths so the tray can be matched to the material going into it. This kit is the 2-1\/4 to 2-1\/2 in. (6 cm) version, which suits thicker pavers and stone, and also works for decks where the inlay is wet-pour concrete rather than a cut piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe complete Hide cover kit for a 12 in. square opening. You supply the inlay material. Once it is installed the cover lifts out for access to the skimmer basket and sits back down flush with the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm two numbers: the 12 in. square cover size against your skimmer opening and paving layout, and the thickness of the material you intend to inlay, which must fall in the 2-1\/4 to 2-1\/2 in. range for this kit.\u003c\/p\u003e","brand":"Hide","offers":[{"title":"Default Title","offer_id":48624877535444,"sku":"SKD-25-1005","price":274.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_622bea65-7d0f-43c8-a9ab-c179bd353abf.jpg?v=1788648554"},{"product_id":"skimmer-vac-plate","title":"Waterco Baker-Hydro Skimmer Vac Plate","description":"\u003cp\u003eThe Waterco 51B1024 is the vac plate for Baker-Hydro skimmers. It measures about 8-7\/8 in. across and comes as a complete set: plate, plug on a cord, decal and gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSet the plate over the skimmer basket, connect the vacuum hose to it and the pump draws through the skimmer with the basket still catching debris. When you are not vacuuming, the tethered plug closes the port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the seat in your skimmer and confirm it matches roughly 8-7\/8 in. Baker Hydro is a Waterco brand, and 51B1024 is the current part number for this plate.\u003c\/p\u003e","brand":"Waterco","offers":[{"title":"Default Title","offer_id":48624881008852,"sku":"BAK-251-1556","price":108.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c25ec1ca-4321-4dfc-bb5e-0261506ff1fd.jpg?v=1788648965"},{"product_id":"kafko-1008-skimmer-lid-9-1-2-od-19-0165-1","title":"Kafko Equator 1008 Skimmer Lid 9-1\/2\" OD","description":"\u003cp\u003eThe Kafko 19-0165-1 is the replacement lid for the Equator 1008 skimmer. It measures 9-1\/2 in. across the outside and drops into the deck ring in place of a cracked, sun faded or missing lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the lid you are replacing across its widest point and confirm 9-1\/2 in. The skimmer basket is sold separately.\u003c\/p\u003e","brand":"Barmik","offers":[{"title":"Default Title","offer_id":48624884678868,"sku":"KAK-251-9504","price":20.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/KAK-251-9504_1a.png?v=1788649673"},{"product_id":"hide-12-pool-deck-skimmer-lid-kit-1x1-25-hsl12-1-2","title":"Hide 12\" Pool Deck Skimmer Lid Kit, 1\" to 1-1\/4\" Material Depth (3 cm)","description":"\u003cp\u003eThe Hide HSL12-1.2 is a 12 in. square skimmer cover kit for decks where the skimmer lid should not show. The lid is a tray: the same paver, tile or stone as the surrounding deck is set into it, so the skimmer opening blends in instead of sitting under a plain plastic cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the depth\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHide makes the kit in several depths, and this one takes inlay material 1 in. to 1-1\/4 in. thick, about 3 cm. It is not intended for a poured concrete inlay. If you plan to fill the tray with concrete, order the 1.6, 2.0 or 2.5 kit instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit comes complete. Once the material is set and the cover is in place, it lifts out for access to the skimmer basket and needs little attention beyond that.\u003c\/p\u003e","brand":"Hide","offers":[{"title":"Default Title","offer_id":48624918429908,"sku":"SKD-25-1002","price":257.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fb6aa6c3-6f73-4f31-8462-5251427a56d3.jpg?v=1788653384"},{"product_id":"heavy-duty-flowskim-skimmer-basket-sp1082-12-handle","title":"CMP FlowSkim HD Skimmer Basket with 12\" Handle for Hayward SP-1082 Skimmers","description":"\u003cp\u003eThe CMP 27182-352-000 is a heavy duty FlowSkim skimmer basket built to replace the SP1082CA basket in Hayward SP-1082 skimmers. It measures 7 in. across the top, 6-1\/2 in. across the bottom and 5 in. tall, and it carries a 12 inch FlowSkim handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe handle is the point\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard skimmer basket has to be fished out of the throat by hand, which means reaching into the water and into whatever the basket has caught. The FlowSkim handle stands up above the basket so you take hold of it from the deck, lift, dump and drop it back. Emptying the skimmer turns into a few seconds' work you do not have to think about.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeavy duty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket itself is CMP's thicker heavy duty version, made to survive years of lifting, knocking out against a bin and sitting in the sun. It does the same job as the original, catching leaves and grit before they reach the pump, and it does it for longer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for the Hayward SP-1082 skimmer. Measure your old basket if you are unsure: about 7 in. across the top and 5 in. tall means this is the one.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624922296532,"sku":"CTM-251-3011","price":32.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_48551c97-5eab-4122-b798-69eec83e0db4.jpg?v=1788653614"},{"product_id":"hide-12-pool-deck-skimmer-lid-kit-5-8x7-8-hsl12-0-8","title":"Hide 12 in. Pool Deck Skimmer Lid Kit, 5\/8 in. to 7\/8 in. Material Depth (2 cm)","description":"\u003cp\u003eThe Hide HSL12-0.8 is a complete 12 in. square skimmer cover kit that lets you set your own deck material into the lid, so the skimmer blends into the paving instead of sitting there as a plain plastic disc. This is the 0.8 depth version, for inlay material between 5\/8 in. and 7\/8 in. thick, roughly 2 cm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the depth\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHide offers the 12 in. cover in 0.4, 0.8, 1.2, 1.6, 2.0 and 2.5 in. depths. Measure your paver, tile or stone and order the matching kit. This 0.8 depth is not suitable for poured concrete; if you want to match a concrete deck, use the 1.6 in., 2.0 in. or 2.5 in. kit instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation and use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit based range is meant to make ordering simple for a new pool or landscaping project. Once the cover is in and the material is set, it lifts out for access to the skimmer basket and goes back flush with the deck.\u003c\/p\u003e","brand":"Hide","offers":[{"title":"Default Title","offer_id":48624927637716,"sku":"SKD-25-1001","price":257.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fb7b6e1c-6406-47c1-9bb9-b2231edce91a.jpg?v=1788654777"},{"product_id":"replacement-weir-door","title":"Baker Hydro Replacement Weir Door","description":"\u003cp\u003eThis is the replacement weir door for Baker Hydro skimmers, supplied with its clips. The weir is the hinged flap in the skimmer throat: it floats up to let surface water skim in and drops closed when the pump stops so the leaves it collected stay in the basket instead of drifting back into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe door measures 9-3\/8 in. wide, 6-3\/4 in. tall and 1-1\/8 in. thick. Baker Hydro lists it under two part numbers, WC624070A and 51B1055, and both refer to this door. Measure your old one against those three dimensions before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePull the old door and clips out of the skimmer throat, press the new clips into place and hang the door on them. No tools and no draining. If the old door is missing entirely, the skimmer still runs but pulls less from the surface and lets debris wash back out, so it is worth replacing promptly.\u003c\/p\u003e","brand":"Baker Hydro","offers":[{"title":"Default Title","offer_id":48624929865940,"sku":"BAK-061-7516","price":49.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8765cead-4ec0-42e4-b47e-2c2825804c1e.jpg?v=1788654989"},{"product_id":"pool-skimmer-weir-door-7-3-4","title":"Hayward Pool Skimmer Weir Flap Door 7-3\/4 in.","description":"\u003cp\u003eThe Hayward SPX1082K is the weir flap door for Hayward SP1080 series in-ground skimmers. It is the genuine Hayward part, 7-3\/4 in. wide, and fits the SP1082, SP1084, SP1085-1 and SP1885-2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe door swings inward as water flows into the skimmer, which speeds surface water over the lip and pulls floating debris in with it. When the pump stops, the door closes and keeps that debris in the basket instead of letting it drift back into the pool. A missing or broken weir is the usual reason a skimmer stops picking up leaves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the throat of your skimmer. This door is 7-3\/4 in. wide. The skimmer basket and deck lid are separate parts.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624938025172,"sku":"HAY-251-1917","price":30.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5b030bc6-9c38-4069-8168-d39fa3ff1ca2.jpg?v=1788655758"},{"product_id":"hide-12-pool-deck-skimmer-lid-kit-1-75x2-hsl12-2","title":"Hide 12\" Pool Deck Skimmer Lid Kit, 1-3\/4\" to 2\" Material Depth (5 cm)","description":"\u003cp\u003eThe Hide HSL12-2 is a 12 in. square skimmer lid kit that takes your own deck material. Instead of a plastic disc breaking up the paving, the tray is filled with a matching paver, stone or poured concrete, and the skimmer opening all but disappears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoose the depth to match your material\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHide sells the lid in several depths. This kit suits inlay material 1-3\/4 to 2 in. thick, about 5 cm, and the same depth works for concrete wet pour applications where the lid is filled in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to install and use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit based range makes ordering straightforward, and once installed the lid lifts out for skimmer basket access and sits back flush with the deck. It suits new pool builds and landscape projects alike.\u003c\/p\u003e","brand":"Hide","offers":[{"title":"Default Title","offer_id":48624956834004,"sku":"SKD-25-1004","price":274.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b4a033d4-6d1e-4f25-a30c-3b92fdca6a17.jpg?v=1788656034"},{"product_id":"sp1071k-weir-assembly","title":"Hayward Skimmer Weir Assembly","description":"\u003cp\u003eThe Hayward SPX1071K is the genuine weir door for Hayward in-ground skimmers, supplied as a complete assembly: the plastic door, the foam that floats it and the two spring loaded pins that hold it in the skimmer throat. It is the part previously sold as SP1071K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir rides at the water line and creates the small waterfall that pulls floating leaves and oils into the skimmer. When the pump stops, the door swings shut so what was collected stays in the basket instead of drifting back out. A cracked, sunk or missing weir is the usual reason a skimmer stops pulling debris from the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the door you are replacing. This weir is 8-1\/2 in. by 5-5\/8 in. Hayward also sells a narrower 7-3\/4 in. weir and the SP1070 weir with stop pad, and neither is interchangeable with this one.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48624957849812,"sku":"HAY-251-1918","price":35.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_960062cb-58ff-46d7-a65c-a00a8a4a43e2.jpg?v=1788656159"},{"product_id":"basket-with-vented-tower","title":"SkimPro Skimmer Basket with Vented Tower for Hayward 1080 Skimmers","description":"\u003cp\u003eThe SkimPro SP-HP-1080 is a replacement skimmer basket for the Hayward 1080 series of in-ground skimmers, the ones with two large tabs inside the throat that secure the lid. It replaces the flat standard basket with a basket that carries a patented vented tower and a handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the tower\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard basket packed with leaves blocks the skimmer and starves the pump. The SkimPro tower has vents above the debris line, so water keeps circulating through the skimmer even when the basket is full. That protects the pump motor from running dry and keeps water moving instead of stagnating where algae can take hold.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasier to service\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle sits at the top of the tower, above the water, so you lift the basket out from the deck without reaching into the skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket measures 7-5\/16 in. across the top, 5-5\/8 in. across the bottom and 6-1\/8 in. tall, and stands 12-7\/8 in. from the base to the top of the tower. Other SkimPro baskets fit the Hayward SP1070 series and Baker Hydro skimmers; confirm you have the 1080 before ordering.\u003c\/p\u003e","brand":"Skimpro","offers":[{"title":"Default Title","offer_id":48624957948116,"sku":"GVT-60-502","price":24.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4068bf82-e772-485c-b907-56e21d641dd6.jpg?v=1788656171"},{"product_id":"b-9-skimmer-basket","title":"CMP Pool Skimmer Basket, Replaces Hayward SP1070-E","description":"\u003cp\u003eThe CMP 27180-009-000 is a B-9 size skimmer basket, the common size shared by several skimmers from different manufacturers. It replaces the Hayward SPX1070E basket in the SP1070 Skim Master series, the Pentair Bermuda basket 516112 and the Sta-Rite U3 basket 08650-000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBaskets look alike and fit differently, so measure before ordering. This one is 8-5\/16 in. across the top rim, 5-3\/4 in. across the bottom and 5-3\/16 in. tall. If your old basket matches those numbers, this one drops onto the same ledge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cracked or missing basket lets leaves and debris straight into the pump strainer, and a basket with a split rim can jam in the throat. A spare on the shelf is cheap insurance.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48624967680212,"sku":"SPG-601-0009","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d00788ea-76fd-4e8b-8f82-647112977bc6.jpg?v=1788656855"},{"product_id":"basket-with-vented-tower-hayward-sp1070-series-pool-skimmers","title":"SkimPro Replacement Skimmer Basket with Vented Tower for Hayward SP1070 Series Skimmers","description":"\u003cp\u003eThe SkimPro SP-HP is a replacement skimmer basket with a vented tower and built in handle. SkimPro calls it their most universal basket: it fits Hayward SP1070 series skimmers along with PacFab, Jacuzzi Deckmate, SwimQuip, Sta-Rite and American skimmers that use the flap weir.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the tower matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA standard basket that fills with leaves chokes off flow to the pump. The SkimPro tower has vents above the debris line, so water keeps moving through the skimmer even when the basket is packed. That protects the pump motor from running starved and keeps circulation going, which helps hold off algae between cleanings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasier to empty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tower also works as a handle. Lift the basket straight out from above instead of reaching down into the skimmer throat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket measures 8-7\/16 in. across and 6-1\/8 in. tall. From the base to the top of the tower it is 12-15\/16 in. Check those against your skimmer before ordering.\u003c\/p\u003e","brand":"Skimpro","offers":[{"title":"Default Title","offer_id":48624997040340,"sku":"GVT-60-501","price":24.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_79b63f20-2e34-45b8-8c47-25202172030f.png?v=1788661648"},{"product_id":"oem-strainer-basket-assembly-includes-basket-handle","title":"Baker Hydro OEM Strainer Basket Assembly (Includes Basket and Handle)","description":"\u003cp\u003eThis is the genuine Baker Hydro strainer basket for Hydropak and in-ground Hydro skimmers, part number 51B1026, supplied as a complete assembly with the handle. It is the basket that catches leaves and debris in the skimmer well before water reaches the pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket measures 7-3\/4 in. across the top, tapers to 5-1\/16 in. at the bottom and stands 6 in. tall. Compare those numbers to the basket you are replacing. If they match, this drops straight in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the handle matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket gets emptied more often than any other part of the system. The molded handle lets you lift it clear without reaching into the well, which is the reason handles break off and baskets end up with cracked rims in the first place. Replacing the whole assembly puts a fresh handle and a sound basket back in service at once.\u003c\/p\u003e","brand":"Waterco","offers":[{"title":"Default Title","offer_id":48625005887700,"sku":"BAK-251-1558","price":36.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_79541dee-99a8-430a-9ab7-29e2d466f4c8.jpg?v=1788661955"},{"product_id":"basket-with-vented-tower-1","title":"SkimPro Baker-Hydro Basket with Vented Tower","description":"\u003cp\u003eThe SkimPro SP-B is a replacement skimmer basket with a vented tower, made for Baker-Hydro skimmers. It is a deep skimmer basket, and it stands 18-1\/2 in. from the base to the top of the tower.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the vented tower does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn ordinary basket chokes off flow the moment it fills with leaves. The patented SkimPro tower is vented, so water keeps circulating through the skimmer even when the basket is loaded. That protects the pump motor from a starved suction line and helps keep the water moving instead of going stagnant, which is where algae starts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Baker-Hydro is a deep skimmer with a clear dish control plate that fits over the basket area. That plate comes out when the SkimPro basket goes in. A handle on the basket means you can lift it out without putting your arm in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBasket width 7-15\/16 in., basket height 6-1\/8 in., overall height 18-1\/2 in.\u003c\/p\u003e","brand":"Skimpro","offers":[{"title":"Default Title","offer_id":48625580638420,"sku":"GVT-60-500","price":24.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cda5ccc8-48dd-4e89-8049-35e400225dfe.jpg?v=1788688781"},{"product_id":"weir-assembly-938","title":"Pentair Weir Assembly for Sta-Rite U-3 Skimmer","description":"\u003cp\u003eThe Pentair 08650-0022 is the hinged weir door assembly for Sta-Rite and SwimQuip U-3 skimmers. It is the genuine Pentair OEM part, molded to the original specification so it fits without filing or adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne piece by design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir door and its vertical hinge strip are molded as a single assembly. They are not meant to come apart. Keeping them together is what gives the door its structural strength and its consistent movement in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes and markings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir body measures 8-1\/2 in. long by 5-1\/8 in. wide. The hinge strip is 8-1\/4 in. long by 13\/16 in. wide and carries five holes in two rows. If you want to confirm the match before ordering, check the old part: the weir body is marked PAT. 270235 and 8650-4, and the hinge is marked 8650-8.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation and what it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hinge strip slots inside the skimmer housing behind the small retaining posts and is secured with one or two screws depending on the setup. The door then floats on a horizontal plane and follows the water level, which is what keeps surface debris flowing into the skimmer. A weir that no longer stays upright, has broken prongs or a worn hinge, lets leaves and bugs drift back out of the throat, and this assembly restores the skimming action.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625581129940,"sku":"SWQ-251-3791","price":38.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9b615d62-564b-4ad6-8554-5b1ff6ab472a.jpg?v=1788688882"},{"product_id":"renegade-skimmer-basket","title":"Waterway Renegade Pool Skimmer Basket","description":"\u003cp\u003eThe Waterway 542-3240 is the replacement skimmer basket for Renegade skimmers. It is the genuine Waterway part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTop outside diameter 8 in., 7-13\/16 in. across the top from flat side to flat side, 5-1\/4 in. high, and 5-3\/4 in. across the bottom. Measure your old basket against those figures if you are not sure which skimmer body you have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket sits in the skimmer throat and catches leaves, bugs and larger debris before the water reaches the pump. It is the first line of defense for the pump strainer and impeller, which is why a basket with a split side or a broken rim is worth replacing straight away rather than at the end of the season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLift the old basket out and drop the new one in. It fits Renegade gunite skimmers as well as the vinyl liner and fiberglass versions.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625722097876,"sku":"WWP-251-2083","price":16.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b78c5416-579d-4168-9386-56b8e900cde3.jpg?v=1788689974"},{"product_id":"pool-skimmer-basket-handle-attachment-12-flowskim","title":"CMP FlowSkim Pool Skimmer Basket Handle Attachment, 12 in.","description":"\u003cp\u003eThe CMP FlowSkim basket handle attachment, part 25573-300-000, adds a 12 in. handle to a skimmer basket that did not come with one. It makes emptying the basket cleaner, faster and easier, because you lift and dump instead of reaching down into the skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe flow through design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle is more than a grab point. Water travels down the center of it, so when the basket packs solid with leaves the pump still gets water. That is the difference between a skimmer that chokes off and a pump that keeps its prime, and running dry is what wrecks pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe FlowSkim handle works with most skimmer baskets that stand at least about 5 in. tall. Measure your basket before ordering. The handle is sold on its own, to fit into a basket you already have.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625722163412,"sku":"CTM-251-0505","price":19.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_355ee840-8444-4b49-87e5-76d77dc659e5.jpg?v=1788689982"},{"product_id":"hide-12-pool-deck-skimmer-lid-kit-3-8x-5","title":"Hide 12 in. Pool Deck Skimmer Lid Kit, 3\/8 in. to 1\/2 in. Material Depth (1 cm)","description":"\u003cp\u003eThe Hide HSL12-0.4 is a 12 in. square deck skimmer lid kit, an external inlay cover that takes your own deck material so the skimmer lid blends into the surface instead of interrupting it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial depth\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is the 1 cm depth, which suits inlay material 3\/8 in. to 1\/2 in. thick. It is not suitable for concrete. Hide offers 1.6, 2.0 and 2.5 depth kits for heavier material, so match the kit to the thickness of the material you plan to set into it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits in the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit based range is aimed at new landscape work and new pool installations, where the deck material is chosen before the cover is ordered. Once it is installed, the cover lifts and reseats the same way an ordinary skimmer lid does.\u003c\/p\u003e","brand":"Hide","offers":[{"title":"Default Title","offer_id":48625723670740,"sku":"SKD-25-1000","price":257.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a31532b7-11f4-428b-b00a-3851786b0e32.jpg?v=1788690068"},{"product_id":"sp1070-weir-assembly-with-stop-pad","title":"Hayward SP1070 Weir Assembly with Stop Pad","description":"\u003cp\u003eThe Hayward SPX1070KHR is the skimmer weir assembly with stop pad for SP1070 series Skim-master skimmers. It is the genuine Hayward part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow a weir works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir is the hinged door across the skimmer throat. With the pump running, suction pulls it down just below the water line so only the top film of water spills over it, which is where the leaves, oils and dust are. That is the whole trick to surface skimming. When the pump shuts off, the weir floats back up and closes the throat, keeping everything already in the basket from washing back into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe flapper door measures approximately 5-1\/16 in. by 8-3\/8 in., and the hinge is 1 in. by 8-3\/4 in. by 1.5 in. Compare those against your old weir before ordering, since skimmer throats vary between models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe stop pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stop pad sets how far the door can travel. Without it the weir can lay over flat or jam in the throat, and the skimming action is lost even though the part looks like it is in place.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48625727602900,"sku":"HAY-251-1891","price":39.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_11e167b8-8b39-40ed-a69c-81e007100fad.jpg?v=1788690155"},{"product_id":"s-10-admiral-skimmer-basket-generic","title":"SuperPro S-10 Admiral Skimmer Basket (Generic)","description":"\u003cp\u003eThe SuperPro B-37 is a generic replacement basket for the Pentair American Products S-10 Admiral in ground skimmer. It drops into the same skimmer that takes the factory 850001 basket and is also sold against the numbers B37 and 27180-037-000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the measurements\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer baskets look alike and are not interchangeable. This one is 8-7\/16 inches across the top, 7-3\/4 inches tall and 7-1\/2 inches across the bottom. Pull your old basket and measure it against those three numbers before ordering, because a basket that is close but not right will sit high in the throat and let debris slip past.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a cracked basket matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe skimmer basket is the first filter in the system. Once the rim cracks or a wall splits, leaves and grit go straight down the suction line to the pump strainer, and from there to the impeller. Replacing a worn basket is a cheap way to keep that from happening.\u003c\/p\u003e\u003cp\u003eThis is an aftermarket part, built to the original dimensions rather than supplied by the skimmer manufacturer.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48625743495380,"sku":"SPG-601-0037","price":18.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cf15b33d-7258-4e24-932d-bb91a95e8b6a.jpg?v=1788690606"},{"product_id":"flowskim-basket-and-handle-sp1070e-u3","title":"CMP FlowSkim Basket and Handle SP1070E, U3","description":"\u003cp\u003eThe CMP 27182-300-000 is the FlowSkim skimmer basket with an integrated handle, a replacement for the Hayward SPX1070E basket used in SP1070E and U3 skimmers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe handle does two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt gives you something to grab, so the basket lifts straight out and tips over cleanly instead of being fished at with fingertips. It is also hollow and set at an angle, which gives water a path through the middle of the basket once leaves have packed the sides. That keeps flow up to the pump when the basket is full rather than choking it off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e8 in. across the top, 6-1\/2 in. across the bottom and 5-3\/8 in. high. Measure the basket you are taking out if you are unsure which skimmer body you have.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48625747362004,"sku":"CTM-251-0504","price":31.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a9f1a4e0-dbfe-4be4-9030-2bf032ee1c57.jpg?v=1788691376"},{"product_id":"u-3-skimmer-basket-with-handle","title":"Pentair U-3 Skimmer Basket with Handle","description":"\u003cp\u003eThis is the replacement basket with handle for the U-3 model skimmer, the skimmer sold over the years under the Pentair, Sta-Rite and Swimquip names on concrete and vinyl pools. Pentair part number 08650-0007Z.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMeasurements\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket is 5 1\/4 in deep with an 8 1\/4 in top diameter and a 5 3\/4 in bottom diameter. That taper is what seats it properly in the U-3 throat, so a basket from another skimmer will either sit high or drop through. If you are not certain which skimmer you have, measure the old basket at the rim first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is worth changing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket takes the first pass at leaves and debris. Once the mesh cracks or the rim splits, debris slips past and ends up in the pump strainer basket or, worse, wedged in the impeller. A basket is the cheapest part in the whole suction line and the one that protects everything downstream of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe handle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle is molded onto the basket. Full baskets are heavy and slippery, and a handle is the difference between a clean lift and dumping half the load back into the pool.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625748377812,"sku":"SWQ-251-3789","price":21.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_567d4f07-20e2-49fa-8ec7-d4b7b1fef621.jpg?v=1788691527"},{"product_id":"oem-sp1070-skimmer-basket","title":"Hayward OEM SP1070 Skimmer Basket","description":"\u003cp\u003eThe Hayward SPX1070E is the replacement basket for the SP1070 series Skim-Master in-ground skimmer. It is the genuine Hayward part, molded in plastic and sized to drop into the skimmer throat without rocking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward lists it for the SP10712S, SP1071210FVA, SP1070 and SP1071 skimmers. The basket measures 8-5\/16 inches across the top, 5-3\/4 inches across the bottom and 5-3\/16 inches tall, so it is easy to check against the one you are pulling out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe skimmer basket is the first thing standing between the pool surface and the pump. When it cracks, or when someone runs without one, leaves and grit go straight to the pump strainer and then to the impeller. A basket is the cheapest part in the whole circulation loop and the one that saves the most.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48625749852372,"sku":"HAY-251-1896","price":21.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2db00a92-7a34-4305-ae62-8cda3825ea8a.png?v=1788691749"},{"product_id":"kafko-equator-skimmer-weir-door-19-0101-0","title":"Latham Pool Products Kafko \/ Equator Skimmer Weir Door","description":"\u003cp\u003eThis is the replacement weir door for Kafko and Equator pool skimmers, Latham part number 19-0101-0.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir is the hinged flap sitting in the skimmer mouth. Water flowing toward the pump pushes it inward, which narrows the opening and speeds up the surface flow so leaves and film get pulled in rather than drifting past. When the pump shuts down, the flap falls closed and holds whatever the skimmer collected inside the basket instead of letting it float back out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeir doors are among the shortest lived parts on a pool. Sun and chemistry make the plastic brittle, the pivot tabs snap, and a loose one often disappears entirely. If your skimmer seems slow at clearing the surface, or debris reappears in the pool every time the pump cycles off, the weir is the first thing to check.\u003c\/p\u003e","brand":"Barmik","offers":[{"title":"Default Title","offer_id":48625784979668,"sku":"KAK-251-9501","price":17.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/KAK-251-9501_1a.png?v=1788692310"},{"product_id":"bermuda-skimmer-basket-with-handle","title":"Pentair OEM Bermuda Skimmer Basket with Handle","description":"\u003cp\u003eThe Pentair 516112Z is the genuine Bermuda skimmer basket with a handle, for the Pentair Bermuda gunite and vinyl liner skimmers. It is the OEM basket, so it drops into the skimmer throat the way the original did.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the handle matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA basket without a handle has to be fished out by the rim, which is awkward when it is packed with wet leaves. The handle gives you something to grip, so a full basket comes out in one motion and goes back seated correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo not run a cracked basket\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe skimmer basket is the first filter in the system. Once it splits, leaves and grit pass straight through to the pump strainer and then to the impeller, which is a much more expensive thing to clear. A basket that has gone brittle in the sun is due for replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size before you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo dimension sets are published for this part. The attribute list gives an 8-1\/4\" top outside diameter with a 5-1\/4\" height, while the descriptive listing gives 8-1\/2\" top and 5-1\/2\" height. Both agree on the 5-3\/4\" bottom outside diameter. If your skimmer throat is a close fit, measure the old basket first.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625816043732,"sku":"PAC-251-5748","price":33.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_835e931d-f140-4a0f-ac50-f3231f02b639.jpg?v=1788700506"},{"product_id":"skim-clean-skimmer-weir-assembly","title":"Pentair Skim-Clean Skimmer Weir Assembly","description":"\u003cp\u003eThe Pentair 513027 is the replacement weir assembly for Pac-Fab Skim-Clean skimmers. It is the genuine part and comes with the plastic hinge and the foam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it goes together\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hinge snaps onto the weir, and the hinge is then screwed onto the skimmer body. The foam in the package is what keeps the weir riding at the water line so it swings with the surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes and color\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir measures 7-1\/4\" wide, 5-1\/8\" long and 1-1\/4\" thick. The manufacturer has changed the color from white to gray, so if your skimmer still carries an original white weir the new one will not match it exactly.\u003c\/p\u003e\u003cp\u003eA weir that has gone stiff, cracked or waterlogged stops doing the one job it has, which is holding surface debris inside the skimmer once the pump stops. It is a small part with an outsized effect on how clean the surface stays.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625842389204,"sku":"PAC-251-5753","price":32.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e8362ede-438a-45f9-89c9-be18cc777056.jpg?v=1788701377"},{"product_id":"baker-hydro-skimmer-lid","title":"Waterco Baker Hydro Skimmer Lid","description":"\u003cp\u003eThe Waterco 51B1017 is the skimmer lid, also listed as the deck plate or deck lid, for Baker Hydro and Waterco skimmers. It is supplied in beige.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich skimmers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed for the Baker Hydro Hydropak skimmer and the Baker Hydro in-ground Hydro skimmer, and Waterco lists it across the Baker Hydro and Waterco skimmer range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they need replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer lid sits flush in the deck and takes foot traffic, deck furniture and years of sun. The plastic goes brittle, then cracks or breaks through. Once it does, the deck has an open hole in it, which is a hazard underfoot and lets leaves and debris drop straight past the basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNames to look for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same piece is sold under three descriptions: skimmer lid, deck lid and deck plate. If you are cross referencing an old parts list, 51B1017 is the number that ties them together.\u003c\/p\u003e","brand":"Waterco","offers":[{"title":"Default Title","offer_id":48625847763156,"sku":"BAK-061-7520","price":39.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e56e606c-64bd-4488-b38c-531b24100f48.jpg?v=1788701518"},{"product_id":"square-skimmer-deck-lid-cover","title":"Hayward Square Skimmer Deck Lid Cover","description":"\u003cp\u003eThe Hayward SPX1082E is the square deck lid cover for SP1080 series Skim-master pool skimmers. It is the genuine Hayward part, supplied in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSize first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid measures 10 in. by 10 in. Skimmer lids come in several shapes and sizes and they are not interchangeable, so measure the existing opening before ordering rather than going by the skimmer body alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is worth replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer lid takes sun, foot traffic and pool chemicals year after year, and eventually it goes brittle and cracks. A broken lid is a trip hazard on a wet deck and it lets leaves, toys and grit drop straight into the skimmer throat. Swapping it is a two second job with no tools.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48626113020116,"sku":"HAY-251-1913","price":30.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ede8e5d1-5263-4517-9206-c636105efb23.jpg?v=1788704998"},{"product_id":"round-extension-collar","title":"Hayward Round Extension Collar","description":"\u003cp\u003eThe Hayward SPX1084P is the round extension collar for the SP1082, SP1083, SP1084, SP1085 and SP1086 skimmers. It is the genuine Hayward part, molded in plastic.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe collar sits between the skimmer body and the deck, raising the opening so it finishes level with the surface and giving the lid a flat, square seat. Get that wrong and the lid rocks, sits proud, or lets deck grit fall into the basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCollars crack from foot traffic, from freeze cycles, and most often during deck repairs when something heavy lands on an uncovered skimmer. A cracked or chalked collar is easy to change and instantly tidies up the look of the deck around the skimmer.\u003c\/p\u003e\u003cp\u003eThe lid is a separate part. If the collar has been damaged there is a good chance the lid took a knock at the same time, so check both while the skimmer is open.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48626118426836,"sku":"HAY-251-1928","price":34.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0ba94a9-8bbb-46ad-ae68-1345c5cb9010.jpg?v=1788705066"},{"product_id":"hide-12-pool-deck-skimmer-lid-kit-1-3-8x1-5-8-hsl12-1-6","title":"Hide 12\" Pool Deck Skimmer Lid Kit, 1-3\/8\" to 1-5\/8\" Material Depth","description":"\u003cp\u003eThe Hide HSL12-1.6 is a complete 12 inch square lid kit for a pool deck skimmer. Instead of leaving a plastic lid on show in the middle of the deck, it takes a piece of your own material so the skimmer reads as part of the surface around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the kit to your material\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHide covers are chosen by the depth of the inlay. This one is built for material 1-3\/8 in. to 1-5\/8 in. thick, listed as 4 cm, and the same depth is called out for concrete wet pore applications. Measure the paver, tile or stone you plan to set before ordering, because the depth is what decides which kit is correct.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat arrives\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit ships complete, so there is nothing else to source before the install. Once the material is set into the cover, the lid lifts out for basket checks and cleaning the way a skimmer lid should.\u003c\/p\u003e","brand":"Hide","offers":[{"title":"Default Title","offer_id":48626216992980,"sku":"SKD-25-1003","price":245.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_785834d4-6ad0-403b-b682-3e7e3a250e1a.jpg?v=1788706354"},{"product_id":"vac-mate-vacuum-skimmer-attachment","title":"Pentair Vac-Mate Vacuum and Skimmer Attachment","description":"\u003cp\u003eThe Pentair Vac-Mate, part R211100, is a multi function vacuum and skimmer attachment. It sits in the skimmer and gives you one control handle that manages both jobs at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe problem it solves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRun a suction cleaner off the skimmer the ordinary way and the skimmer stops doing what it is there for. Surface debris sits on the water while the cleaner works the floor. With a Vac-Mate in the skimmer you set the handle once and get cleaner suction and surface skimming together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists a broad set of skimmers: Certikin HD100, Filtrite SK950 and SK910, Hayward SP1070, Jacuzzi PMP9411 and PMP9989, Kafko, Nally P1000, Pentair Pool Products 506300 series, PoolRite, Quiptron and SwimQuip U3.1. Check yours against that list before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626220302548,"sku":"RAI-40-2083","price":113.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cc8ddbcc-f9ae-44c0-ae6c-344f28ff9e42.jpg?v=1788706464"},{"product_id":"bermuda-skimmer-weir-door-8-1-2","title":"Pentair Bermuda Skimmer Weir Door, 8-1\/2 in.","description":"\u003cp\u003eThis is the weir door for the Pentair Bermuda skimmer, listed as 516252Z and also shown as 516252. It measures 8-1\/2 in. wide by 5-3\/8 in. tall and is molded in white.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir is the hinged flap in the skimmer throat. It floats up against the water line and narrows the opening, which speeds up the surface flow and pulls floating leaves and oils in rather than letting them drift past. When the pump shuts off, the weir falls closed so what is in the basket stays there instead of washing back into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeirs crack, warp and go brittle in sunlight, and they get knocked out of their hinge. If the skimmer no longer seems to grab surface debris, or debris keeps reappearing in the pool overnight, the weir is the first thing to look at.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626222366932,"sku":"PAC-251-7631","price":30.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6a3388ae-dfea-4f82-bd12-ec744d7ebb0a.jpg?v=1788706481"},{"product_id":"skimmer-basket","title":"CMP Kafko\/Equator Skimmer Basket","description":"\u003cp\u003eThe CMP 27180-163-000 is a replacement skimmer basket for Kafko and Equator skimmers, made to fit in place of the Kafko 19-0163-1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIdentifying your basket\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe quickest check is the top rim. The basket this part replaces normally carries the number 1006 molded into the rim, so lift yours out and look before ordering. The body measures 6-1\/2 inches tall with 6-3\/4 inches across one end and 7-1\/2 inches across the other. Our sources disagree on which of those measurements is the top and which is the bottom, so measure both ends of the old basket and match the pair rather than a single figure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy not run without one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket is the last barrier before the pump. When it cracks or the rim breaks away, leaves pass straight through, and what would have been a basket change turns into a clogged impeller, a lost prime or a burnt out seal. Baskets are the cheapest part in the entire circulation loop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLife expectancy\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSun and cold both work on a skimmer basket. Most crack at the rim or at the handle first, and by then the plastic is brittle everywhere. If yours has gone that way, replace it rather than nursing it through another season.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626224857300,"sku":"CTM-251-3018","price":32.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_76c91bea-7a5b-476f-b001-510d697dc950.jpg?v=1788706543"},{"product_id":"pre-fab-kit-w-inserts","title":"Baker Hydro Pre-Fab Kit with Inserts","description":"\u003cp\u003eThe Baker Hydro 51B1019 is the pre-fab kit with inserts, supplied complete with the faceplate, gasket, inserts and screws. It is the whole front end of the skimmer in one part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy it as a kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFaceplates rarely fail on their own. By the time the plate is cracked or chalked the gasket underneath has hardened and the screws have corroded into place. Sourcing those three items individually turns a short job into a scavenger hunt, so Baker Hydro sells them together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the faceplate pattern and the screw layout against the skimmer you have. Baker Hydro built several skimmer bodies over the years and the faceplates are not universal.\u003c\/p\u003e","brand":"Baker Hydro","offers":[{"title":"Default Title","offer_id":48626303926484,"sku":"BAK-25-1581","price":90.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c37e6fae-9a64-4efc-ae31-876aa83298e4.gif?v=1788707933"},{"product_id":"aquastar-skz214-zarstar-skimmer-basket","title":"AquaStar ZarStar Skimmer Basket","description":"\u003cp\u003eThe AquaStar SKZ214 is the genuine replacement skimmer basket for ZarStar skimmers, in the large 19-1\/2 inch size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the extra size buys you\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAquaStar lists this as a large basket that filters more debris than a standard size skimmer basket. Capacity is the practical difference. A basket that fills up stops passing water, and once flow is restricted the skimmer stops skimming and the pump starts working against a restriction. A bigger basket takes longer to get there, which matters most in the weeks when leaves are coming down faster than anyone wants to keep up with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits in the chain\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe skimmer basket is the first stage. It pre-filters debris before that debris reaches the pump basket and the filter, so everything downstream sees less. Keeping this basket in one piece and seated correctly is a small habit that keeps the pump wet end clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBaskets crack at the rim and the handle, and a cracked basket lets exactly the leaves and twigs it was supposed to hold slip past into the line. If yours is split or missing sections of mesh, replace it rather than working around it.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48626309759188,"sku":"API-251-0999","price":85.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_832819b8-3e9d-4037-9838-1b97f5a6afe4.jpg?v=1788708018"},{"product_id":"forming-frame","title":"Baker Hydro Skimmer Forming Frame","description":"\u003cp\u003eThe 51B1016 is the forming frame for the Baker Hydro skimmer, a flat frame measuring 10.5\" x 1.75\". The same part number is also listed under the Waterco name, and it is the same frame either way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe forming ring frame sets the finished shape of the skimmer throat opening. It is a structural piece rather than a wear part, which is why most people come looking for one only after a frame has been damaged or a skimmer is being fitted from scratch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the frame you are replacing. Skimmer families differ, and 10.5\" x 1.75\" is the size that matters here. The frame is supplied by itself, so gaskets, baskets and lids are separate purchases.\u003c\/p\u003e","brand":"Baker Hydro","offers":[{"title":"Default Title","offer_id":48626310217940,"sku":"BAK-251-1551","price":38.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ce1f9f92-151f-4e86-8342-9872d9b539e2.gif?v=1788708027"},{"product_id":"skimmer-basket-sp1082ca-generic","title":"CMP Hayward SP1082CA Replacement Skimmer Basket","description":"\u003cp\u003eThis is the CMP 27180-152-000 skimmer basket, a generic replacement for the Hayward SP1082CA. It fits the Hayward 1082, 1083, 1084 and 1085 model skimmers, and is also referenced under the number B-152.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShape and size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket is cylindrical from top to bottom, with a lip at the rim that makes it slightly wider at the top than at the base. The source data carries two sets of measurements for it. One gives a 7 inch top, 5 inch height and 6-1\/2 inch bottom. The other gives 7-3\/8 inch top, 5-1\/8 inch height and 6-5\/8 inch bottom. Both are listed in the specifications so you can measure your old basket against them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric, and what that means\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a CMP made basket rather than the Hayward original. It substitutes for the OEM part in the same skimmers, but the color and the handle style may vary from what came out. If matching the original exactly matters to you, the genuine Hayward basket is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy baskets get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer baskets live in sun and chlorinated water and go brittle over a few seasons. Once one cracks, leaves and grit pass straight through to the pump basket and then the impeller, so a split basket is worth changing as soon as it shows.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626381193428,"sku":"SPG-601-0152","price":18.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_686691a3-59c8-4f61-bbf4-3bf7cc451669.jpg?v=1788709517"},{"product_id":"pentair-506160-float-valve-assembly","title":"Pentair Bermuda Float Valve Assembly","description":"\u003cp\u003eThe Pentair 506160Z is the float valve assembly for Bermuda gunite skimmers. It also appears under part number 506160; both refer to this assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the float valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt rides the water level inside the skimmer. When the level falls far enough that the skimmer would start pulling air, the float closes off that path so the pump keeps drawing water instead. That is what stands between a low pool and a pump that loses prime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it gets replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFloat valves stick. Scale, grit and years of movement stop the float traveling freely, and a float that will not move is a float that will not close. Testing it at opening takes a minute; finding out it failed by losing a pump seal takes considerably longer.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626508169428,"sku":"PAC-251-7307","price":62.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3a4b1c5f-fc20-43a1-ae11-6fe905db3179.jpg?v=1788711098"},{"product_id":"skimmer-wier-plate-w-2-clips","title":"AquaStar Flow Star Skimmer Weir, Dark Gray","description":"\u003cp\u003eThe AquaStar SKWD105 is the Flow Star weir plate assembly in dark gray, supplied with two weir clip locks. It measures 8-3\/8 inches high by 5-1\/8 inches wide and is listed for standard skimmers as well as vinyl and fiberglass skimmers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir is doing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir is the hinged flap at the mouth of the skimmer. It holds a shallow, fast moving layer of water across the throat, which is what pulls leaves, bugs and oils in and stops them washing back out when the pump shuts down. It is a small plastic part carrying a large share of how well the pool surface stays clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it needs changing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeirs go stiff, crack at the hinge, or simply disappear. The symptom is usually the same: debris sitting on the surface all day while the skimmer basket stays empty. Replacing the weir restores the skimming action without touching anything else in the system.\u003c\/p\u003e\u003cp\u003eMeasure the skimmer throat against the 8-3\/8 by 5-1\/8 inch dimensions before ordering, since skimmer openings vary between manufacturers.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48626582880468,"sku":"API-251-1227","price":22.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_16e63a06-c7f9-4f7f-aac4-85689400c27d.jpg?v=1788712712"},{"product_id":"admiral-deck-lid-white","title":"Pentair Admiral Deck Lid, White","description":"\u003cp\u003eThe Pentair 85007400Z is the white locking deck lid for the American Products Admiral in ground skimmer. It is a new OEM part, the same lid the skimmer was supplied with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy lids fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer lid sits in the deck taking full sun and every footstep near the edge of the pool. Over the years the plastic goes brittle, the locking tabs chip, and the lid starts to rock or lift out. A cracked lid is a trip hazard and lets leaves blow straight past the skimmer throat, so it is worth changing as soon as it starts to move.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAdmiral skimmers were built with more than one lid design. This is the current locking deck lid. If your collar takes the old style lid, that is a separate Pentair part number, so hold the old lid up against the product photos first.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626701762772,"sku":"AMP-251-1263","price":42.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_64a8a32f-8cf5-4287-91cf-d0c8b511d57d.jpg?v=1788713849"},{"product_id":"u-3-skimmer-basket-b-9","title":"Val-Pak U-3 Skimmer Basket (B-9)","description":"\u003cp\u003eThe Val-Pak V22-110 is a heavy duty replacement skimmer basket for the U-3, the Hayward SP-1070 and Bermuda skimmers. It is also known as the B-9 basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to last longer than the original\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer baskets fail in two ways: the handle snaps and the basket cracks around the rim. This one has a finger grip molded into the top lip instead of a separate handle, and it is a heavier moulding than a budget basket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe weight matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere is a weight on the outside of the base. That keeps the basket seated in the throat when the pump shuts down or when leaves and other floating debris try to lift it. A basket that floats up lets debris past into the pump pot, which is exactly what the skimmer basket is there to prevent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasurements are given so you can compare against your old basket: 8-3\/8 in. at the top lip, 7-3\/8 in. top inside diameter, 6-3\/4 in. at the bottom. Height is 5-3\/4 in. measured with the weight, or 5-3\/8 in. without it.\u003c\/p\u003e","brand":"Val-pak","offers":[{"title":"Default Title","offer_id":48626729189588,"sku":"VAL-251-503","price":38.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_17f5b00d-a197-4d86-ae08-05efe5bf8f18.jpg?v=1788714119"},{"product_id":"vacuum-plate-assembly","title":"Pentair Vacuum Plate Assembly for PacFab Bermuda Skimmer","description":"\u003cp\u003eThe Pentair 506161 is the vacuum plate assembly for the PacFab Bermuda skimmer. It is the piece that turns the skimmer into a vacuum port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo vacuum a pool by hand you need the pump to pull through the hose and nothing else. The vacuum plate seats down in the skimmer and blocks the open path, so all the suction goes to the hose connection instead of splitting between the hose and the skimmer mouth. The difference at the vacuum head is obvious: with the plate in, the head grips the floor and picks up; without it, it wanders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plate goes into the skimmer above the basket, so debris pulled up the hose still collects in the basket where it is easy to empty rather than travelling on to the pump strainer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the assembly only. The Bermuda skimmer basket is a separate part, so order it alongside if yours is cracked or missing a handle.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626821234900,"sku":"PAC-25-1660","price":33.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_eb7edea7-1bb9-40db-a465-93495dd9ad35.jpg?v=1788715481"},{"product_id":"replacement-skimmer-lid-for-anthony-sylvan","title":"Replacement Skimmer Lid for Anthony Sylvan Pools, 8-3\/4 in. Top Diameter","description":"\u003cp\u003ePart 59200209 is the replacement skimmer lid cover for Anthony Sylvan pools. The top diameter is 8-3\/4 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMeasure before ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer lids are easy to get wrong, because several look alike at a glance. The check that settles it is the top diameter. Lay a tape across the top of the lid you are replacing and confirm 8-3\/4 inches before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid only. The skimmer body, the basket and the weir are separate items, so order those alongside it if more than the cover has failed. A missing or broken lid leaves an open hole in the deck, so it is the kind of repair worth doing promptly.\u003c\/p\u003e","brand":"Active Pool Supply","offers":[{"title":"Default Title","offer_id":48626837029076,"sku":"59200209","price":61.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_308fcafe-0092-4590-acd2-917e3490a462.jpg?v=1788715701"},{"product_id":"weir-door-assembly-white","title":"Waterway Weir Door Assembly, White","description":"\u003cp\u003eThe Waterway 550-9950 is the white weir door assembly for the Waterway Renegade pool skimmer. It is the hinged flap that sits in the throat of the skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir floats up so its top edge rides just at the water line. That forces the skimmer to draw the thin surface layer, which is where oils, pollen, dust and floating leaves collect. Take the weir away and the skimmer pulls from the full depth of the opening, and surface debris simply drifts past.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe other half of the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen the pump shuts off, the weir falls closed and holds whatever is in the basket. Without it, an afternoon of collected leaves floats straight back into the pool overnight. A weir that is cracked, stuck or gone is worth replacing on both counts.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627380617428,"sku":"WWP-251-2081","price":20.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_deece006-b905-4f1b-ad3e-c5a7de712355.jpg?v=1788722922"},{"product_id":"skimmer-wier-plate-w-2-clips-1","title":"AquaStar Flow Star Skimmer Weir Plate","description":"\u003cp\u003eThe AquaStar SKWD101 is the Flow Star weir plate assembly in white, supplied with two weir clip locks. It fits standard skimmers as well as vinyl and fiberglass skimmers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir is the hinged flap sitting in the throat of the skimmer. While the pump runs it lifts, and the narrow gap it creates speeds up the surface water so leaves and film get pulled in rather than drifting past. When the pump shuts off, the weir falls closed and traps everything already in the basket instead of letting it wash straight back into the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is worth replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeirs take sun and chemicals for years, and they end up cracked, warped, or simply gone after someone lifts the lid to clear the basket. A pool that used to keep a clean surface and now does not is very often just a missing or broken weir, which makes this one of the cheapest fixes on the equipment pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir plate assembly with two weir clip locks, in white.\u003c\/p\u003e","brand":"AquaStar","offers":[{"title":"Default Title","offer_id":48627603898580,"sku":"API-251-1224","price":23.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ac672f02-023a-4e42-8645-59b6a2dc7a5a.jpg?v=1788724259"},{"product_id":"snap-on-face-plate-cover-sp1084","title":"Hayward Snap-On Face Plate Cover for SP1084 Skimmers, White","description":"\u003cp\u003eHayward SP1084F is the snap-on face plate cover for SP1084 in-ground skimmers, in white. It is the genuine Hayward part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe face plate is what clamps the skimmer throat against the pool wall, and its mounting screws sit in plain view. This cover snaps over the top of them so the opening reads as a clean, finished rectangle rather than a row of fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor options\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhite is the standard. Hayward also makes the same cover in gray and dark gray under different part numbers, so match it to the skimmer lid and the rest of the deck trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt snaps into place over the existing face plate, with nothing extra to buy. Covers usually get replaced because the old one has yellowed, chalked or snapped a clip, and swapping it is a few minutes of work at the water line.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627687424212,"sku":"HAY-251-6308","price":18.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6b748c3c-e00e-400d-b803-cc4c0fc3ce02.png?v=1788726611"},{"product_id":"bermuda-skimmer-lid-white","title":"Pentair Bermuda Skimmer Lid, White","description":"\u003cp\u003eThe Pentair 516215Z is the white deck lid for Bermuda gunite skimmers and the white goods kits supplied with them. It measures 9-1\/4 inch and is the genuine Pentair part, also listed under the OEM number 516215.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy lids get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer lid sits flush in the deck and takes sun, chemicals and foot traffic year after year. They go brittle, crack around the edge and eventually break through. Beyond the look of it, a broken lid leaves an open hole at the deck and is a genuine trip and fall hazard around a pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSkimmer lids come in several sizes that look alike. This one is 9-1\/4 inch for the Bermuda skimmer, so measure the lid you are replacing rather than going by eye. It is also made in tan under a separate part number if your deck hardware is tan.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627699286228,"sku":"PAC-251-6128","price":41.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d9599f00-d40e-4feb-ba7b-ee586b537ccd.jpg?v=1788726748"},{"product_id":"orifice-plate-gasket","title":"Aqua Genie Orifice Plate Gasket","description":"\u003cp\u003eThe Aqua Genie H02190 is the orifice plate gasket for the Aqua Genie in ground skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe gasket goes between the orifice plate and the skimmer, and it is what keeps that joint watertight. If the joint is weeping after the plate has been off, or the old gasket came out flattened, hardened or torn, this is the part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are buying\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe gasket alone, part number H02190. The orifice plate and the face plate gasket are separate part numbers, so identify which piece you actually need before ordering.\u003c\/p\u003e","brand":"Hydra Pools","offers":[{"title":"Default Title","offer_id":48627703382228,"sku":"HYD-251-1700","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_125bb2c8-fffd-4a91-92a4-85b447fedca6.jpg?v=1788726815"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/skimmer-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}