{"title":"Spa Parts","description":"\u003cp\u003eShop spa parts at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"black-cover-butler-spa-cover-lifter","title":"Cover Butler Spa Cover Lifter, Black, CB-BLACK","description":"\u003cp\u003eThe Cover Butler CB-BLACK is a spa cover lifter in a black finish. Its one size frame adjusts to fit nearly every square and rectangular spa, and it mounts to the bottom and back of the cabinet with three rear mounting blocks, so the sides of the spa stay clear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClearances and fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAllow 18 in. (45.72 cm) behind the spa for the folded cover and 3 in. (7.62 cm) at each side. It handles covers up to 99 in. (251.46 cm) across. Round, hexagonal and octagonal cabinets are the exceptions; the frame is not designed for those shapes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDetails that matter daily\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eComfort foam grips pad the corners where you take hold of the bar, and the arms double as a towel rack once the cover is folded back. It is a genuine Cover Butler product.\u003c\/p\u003e","brand":"Cover Butler","offers":[{"title":"Default Title","offer_id":48625022795988,"sku":"ASI-85-3005","price":160.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/cb-black-black-cover-butler-spa-cover-lifter.jpg?v=1788662537"},{"product_id":"laing-10-0102-120-240v-75-barb-e5-spa-circulation-pump-with-4-cord","title":"Laing Thermotech E5 Spa Circulation Pump with 4' Cord, 120\/240V, 3\/4\" Barb, 10-0102-K","description":"\u003cp\u003eThe Laing Thermotech E5, part 10-0102-K, is a spa circulation pump with 3\/4 in. barb connections and a 4 ft cord fitted. It is the current replacement for the SilentFlo 5000 (72204) and all earlier single speed circulation pumps on Caldera, Hot Spring and Tiger River spas, where it carries the Watkins part number 74427. HydroQuip lists it as 10-0102-K and Laing as E5-NCHNNNN3W-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe E5 draws 39 watts and moves up to 6,000 gallons of water in 24 hours, a step up in capacity over the models it replaces. The magnetic drive starts gradually and primes with water reliably.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRun it wet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump is water lubricated and should only be run with water in the spa. If it does run dry, a thermal cut-off shuts it down before it overheats; switch it off for 10 seconds and back on to reset.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWiring note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis newer model no longer needs a bonding lug. Connect the green wire in the cord to a grounding location inside the controller.\u003c\/p\u003e","brand":"Hydro-Quip","offers":[{"title":"Default Title","offer_id":48625023025364,"sku":"HQP-85-0102","price":195.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/HQ100102.jpg?v=1788662569"},{"product_id":"2hp-240v-silencer-air-blower","title":"Air Supply of the Future Silencer Air Blower, 2HP, 240V, 5.0 Amps, 6320241","description":"\u003cp\u003eThe Silencer from Air Supply of the Future is an air blower rated 2 HP at 240 volts and 5.0 amps, part number 6320241. It supplies the air that produces the bubbles in a spa, working alongside but separately from the jet pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it stays quiet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor mount is the reason for the name. A thick rubber cup encases the fan while the motor is left free to vibrate on a flexible rubber base, so vibration is absorbed rather than transmitted into the cabinet. That approach means the blower needs virtually no sound absorbing foam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy that matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMany blowers rely on filter foam to bring the noise down. Foam can pack and clog over time, and a blower starved of air runs hot. Handling noise at the mount instead avoids that failure mode entirely.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the 240 volt version. Check the supply at the spa pack, since the 120 volt Silencer is a different part number.\u003c\/p\u003e","brand":"Air Supply of the Future","offers":[{"title":"Default Title","offer_id":48625723506900,"sku":"AIR-85-8464","price":230.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_066a6401-c322-447a-a2ec-40630ee7ae23.jpg?v=1788690048"},{"product_id":"badu-swimjet-systems-badustream-ii-ss484-2400m-1sw-swimjet-system-with-square-cover-2-jets-4-0hp-1-ph","title":"Speck Badu Stream II SS484-2400M-1SW SwimJet System with Square Cover, 2 Jets, 4.0 HP, 1 PH","description":"\u003cp\u003eThe Speck SS484-2400M-1SW is a Badu Stream II SwimJet system built with two jets, a 4.0 HP single phase motor and a square cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a swim jet system does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt drives a current across the pool so a swimmer can work against moving water without needing length to swim into. That turns a small or oddly shaped pool into somewhere you can train, and gives a larger pool a second use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis configuration\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpeck builds the Badu Stream II in several arrangements. This model number is the two jet version with the square cover and a 4.0 HP single phase motor, so match SS484-2400M-1SW against the jets, cover style and electrical supply you need before ordering.\u003c\/p\u003e\u003cp\u003eIt ships as freight.\u003c\/p\u003e","brand":"Speck Pumps","offers":[{"title":"Default Title","offer_id":48625744740564,"sku":"SPK-10-3146","price":6791.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1b1d0477-77ce-4e10-a728-bb7bb4f5ac5d.jpg?v=1788690799"},{"product_id":"speck-pumps-ss484-2400m-1rw-badu-stream-ii-swimjet-system-4hp-208-230v","title":"Speck Badu Stream II SS484-2400M-1RW SwimJet System, 4 HP, 208-230V","description":"\u003cp\u003eThe Speck SS484-2400M-1RW is a Badu Stream II SwimJet system with a 4 HP motor running on a 208-230V supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a swim jet system does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt pushes a current across the pool so a swimmer works against moving water instead of needing length to swim into. A small pool becomes somewhere you can train, and a larger one gains a second use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder by the full model number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpeck builds the Badu Stream II in several configurations, and they differ in jets, cover style and electrical supply. SS484-2400M-1RW is the 4 HP, 208-230V version. It ships as freight.\u003c\/p\u003e","brand":"Speck Pumps","offers":[{"title":"Default Title","offer_id":48625745789140,"sku":"SPK-10-3145","price":6791.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3883bc6e-7a5a-4b32-9072-533ad33d3553.jpg?v=1788690820"},{"product_id":"aqua-flo-02607000-1010-flo-master-fmcp-center-discharge-48-frame-115v-1-0-hp-75-ophp-2-speed","title":"Aqua-Flo Flo-Master FMCP, Center Discharge, 48-Frame 115V 1.0 HP .75 OPHP 2-Speed, 02607000-1010","description":"\u003cp\u003eThe Aqua-Flo Flo-Master FMCP, part number 02607000-1010, is a center discharge pump on a 48-frame 115V motor, rated 1.0 HP with .75 OPHP and wired for two speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the pump you are replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree things decide whether a pump drops in: the frame size, the discharge position and the voltage. This one is 48-frame, center discharge and 115V. Confirm all three against what is on the pad now, because a side discharge or 230V unit of the same horsepower will not simply swap in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed handles the long circulation and filtration hours at a fraction of the power. High speed is there for the times the system needs real flow. A two speed pump earns its place on the low speed hours, not the high ones.\u003c\/p\u003e","brand":"Spa Parts Plus","offers":[{"title":"Default Title","offer_id":48626282135764,"sku":"AQF-10-407","price":407.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5e9b389a-2a66-4fd5-aae6-ee4dfe3ce984.png?v=1788707609"},{"product_id":"2-clear-check-valve-f-blowers","title":"Air Supply of the Future 2\" Clear Check Valve for Blowers, 1112500","description":"\u003cp\u003eThe Air Supply of the Future 1112500 is a union check valve for spa blowers, built with a clear PVC body so the valve can be inspected without opening it up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a blower needs one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA blower pushes air into the spa, and without a one way valve in the line, water finds its way back up the pipe toward the blower when the air stops. That is how blowers die. The check valve is the cheap part that stands between the water and the expensive one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is built\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal is drip proof, which keeps air from leaking out of the line, and the spring is a 1\/4 lb. dome shape chosen to give balanced, even airflow rather than a hard snap. That spring is Underwriters Recognized stainless steel, so it holds up in the warm, wet air a blower line carries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir Supply lists the valve for 1 1\/2 inch IPS and 2 inch O.D. spigot, and the union connection means it can be taken off for service without cutting into the pipe. Measure the plumbing you are joining before ordering.\u003c\/p\u003e","brand":"Air Supply of the Future","offers":[{"title":"Default Title","offer_id":48626366415060,"sku":"AIR-851-8016","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/air-supply-of-the-future-1112500-2-clear-check-valve-for-blowers.jpg?v=1788709349"},{"product_id":"silencer-air-blower-motor-2-0hp-120v-11-0-amps","title":"Air Supply of the Future Silencer Air Blower, 2.0HP, 120V, 11.0 Amps, 6320141","description":"\u003cp\u003eThe Silencer from Air Supply of the Future is an air blower rated 2.0 HP at 120 volts, drawing 11.0 amps, listed under part number 6320141. It is the model built around quiet running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it stays quiet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe noise control is mechanical rather than added on. A thick rubber cup encases the fan, and the motor sits on a flexible rubber base that lets it vibrate freely instead of passing that vibration into the housing. The result is that the blower needs almost no noise absorbing foam to run quietly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy that matters over time\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlenty of blowers use filter foam to hold noise down. Foam works at first, then loads up with dust and lint. As it clogs, airflow drops, the blower starves and the motor runs hotter than it should. A design that does not lean on foam avoids that whole failure path.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you buy\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the voltage and current your spa pack supplies. This unit is 120 volts at 11.0 amps, and blowers in this family are also built in other horsepower and voltage combinations.\u003c\/p\u003e","brand":"Air Supply of the Future","offers":[{"title":"Default Title","offer_id":48626381390036,"sku":"AIR-85-8479","price":230.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c07e86bf-5af6-4952-bac9-698e5734f2ff.jpg?v=1788709521"},{"product_id":"cmp-spa-master-25580-090-000-2-1-2-white-gunite-jet-body-with-niche","title":"CMP Spa Master 2-1\/2\" White Gunite Jet Body with Niche, 25580-090-000","description":"\u003cp\u003eThe CMP Spa Master 25580-090-000 is a 2-1\/2 inch white gunite jet body with niche. It is the rough in half of a spa jet, the part that gets plumbed and set into the shell during construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBody and niche\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body carries the water and air connections and locates the jet in the wall. The niche is the recess that the finished jet internal seats into after the shell is plastered. Having both as one molded part means the geometry is right without any field fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGunite specific\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is made to be poured into gunite. Fiberglass and vinyl liner pools use different bodies, so match the body to the shell type before ordering. The internals that complete the jet are ordered separately, which is normal: bodies go in during construction and internals go in at the end.\u003c\/p\u003e\u003cp\u003eIt is supplied in white, in the 2-1\/2 inch size.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48626488312020,"sku":"CTM-25-1011","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_81e68bb6-f150-4a52-9523-78567397029e.jpg?v=1788710877"},{"product_id":"super-pro-super120010-1-hp-120v-quiet-pool-spa-air-blower","title":"SuperPro 1 HP, 120V, Quiet Pool Spa Air Blower, SUPER120010","description":"\u003cp\u003eThe SuperPro SUPER120010 is a quiet pool and spa air blower rated at 1 HP and wired for 120V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a blower does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe blower is the air half of a spa. The pump moves water through the jets, and the blower pushes air into the channel that feeds the bubbles. When a blower fails, the water still circulates but the spa goes flat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the horsepower and the voltage to the unit you are removing, and check how the old blower was mounted and plumbed so the replacement lands in the same place.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48626500796628,"sku":"SPG-85-0010","price":282.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f3262463-d349-4b57-babd-fb877af6d3c4.jpg?v=1788711015"},{"product_id":"cover-rock-it-hot-tub-cover-lifter","title":"Cover Valet Cover Rock-It Bar Style Spa Cover Lifter, CVROCK-IT","description":"\u003cp\u003eThe Cover Valet Cover Rock-It is a bar style spa cover lifter that mounts under the spa rather than through the cabinet. Under spa plates slide beneath the shell and are held securely in place by the weight of the spa itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for tight spaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost cover lifters need a generous run of clear space behind the tub to swing the cover through. The Rock-It requires as little as 18 inches of clearance, which puts it within reach of spas installed against a wall, a fence or a deck rail where a conventional lifter simply will not work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOpen and closed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFolded down, the cover stores neatly along the side of the spa and leaves the tub with a full, unobstructed view. Taking the cover off a spa by hand is heavy, awkward work that gets skipped on cold nights, and a cover dragged across the deck wears out early. A lifter turns that into a one person job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild and coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe frame is zinc plated and powder coated for life around chemically treated water, it fits most spas up to 96 inch, and it carries a five year limited manufacturer warranty. Measure the spa cabinet before ordering.\u003c\/p\u003e","brand":"Cover Valet","offers":[{"title":"Default Title","offer_id":48626577146068,"sku":"CHS-85-5010","price":191.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c60d2c98-0438-496e-b433-cfd81ca5f53a.jpg?v=1788712649"},{"product_id":"waterway-plastics-poly-storm-gunite-jet-internals-twin-roto-5-scallop-gray","title":"Waterway Thread-in 5-Scallop Twin Roto Poly Storm Gunite Jet Internal, Gray, 229-8127","description":"\u003cp\u003eThis is the Waterway 229-8127, a Poly Storm gunite jet internal in gray. It is the thread-in twin roto version with a 5-scallop escutcheon face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the internal is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a gunite pool the jet body is set into the wall when the shell is built and stays there. The internal is the part that threads into that body, and it is what you actually see and what shapes the water leaving the jet. Because it screws in, it can be replaced on its own without disturbing the plumbing behind the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching what you have\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway builds Poly Storm internals in several nozzle styles, face patterns and colors. This one is twin roto, 5-scallop, gray. If you are replacing one of a set, pull the old internal and match style and color so the whole wall looks and behaves the same.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626719621332,"sku":"WWP-85-8633","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f32ab296-62e0-4d0a-8a55-b59451ce1f70.jpg?v=1788714034"},{"product_id":"superpro-1-hp-120-v-quiet-spa-blower-with-switch","title":"SuperPro 1 HP 120V Quiet Spa Blower with On\/Off Switch, SUPER120010SW","description":"\u003cp\u003eThe SuperPro SUPER120010SW is a 1 HP quiet spa blower on 120 volts, supplied with an on\/off switch. The brand appears as both SuperPro and Super-Pro on this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a blower does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump moves water; the blower moves air. It feeds the spa air channel so the jets break into bubbles, and it is the component responsible for that effect. A blower that has died leaves the jets flowing water with no aeration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis version includes its own on\/off switch, which is what the SW suffix in the part number marks. That makes it a straightforward choice on a spa without a dedicated blower control already wired in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne horsepower at 120 volts is the usual residential size. SuperPro also builds a 2 HP unit on 240 volts for larger spas, so match the horsepower and the voltage to what your spa is wired for before ordering.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48626964824276,"sku":"SPG-85-0203","price":274.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_703a7168-5c10-4ba9-8375-47d3d931e602.png?v=1788718562"},{"product_id":"life-essentials-lst600-deluxe-adjustable-spa-tray-table","title":"Life Essentials Deluxe Adjustable Spa Tray Table, LST600","description":"\u003cp\u003eThe Life Essentials LST600 is a deluxe adjustable tray table that sits on the wall of a spa or hot tub. It holds two drinks, keeps a phone dry, and turns the edge of the tub into somewhere you can actually put things down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it carries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo cup holders take care of drinks. The shelf is grooved so wet items do not slide off it. A separate waterproof section is built in for a cell phone, which is the thing most people would rather not set down on a wet spa cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReading in the tub\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLift the lid and the table becomes a stand for a book or a tablet, angled where you can see it from the water rather than flat where you cannot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe table adjusts to sit securely on most makes of spa and hot tub wall, so it does not need a bracket or any permanent mounting.\u003c\/p\u003e","brand":"Life Essentials","offers":[{"title":"Default Title","offer_id":48627628310740,"sku":"SSP-85-0000","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8db116b4-6c8c-4a7c-b157-24ae0d75c152.jpg?v=1788725558"},{"product_id":"balboa-slimline-escutcheon-eyeball-white-10-3955","title":"Balboa Slimline Escutcheon and Eyeball White 10-3955, 10-3955WHT","description":"\u003cp\u003eThe Balboa 10-3955 in white is the slimline escutcheon and eyeball set for spa jets. It comes as four pieces: the escutcheon, a Teflon washer, the eyeball itself and a round rubber o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlimline versus standard\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe slimline escutcheon is flat across the top instead of stepping up in a dome, and it measures 2-5\/8 inches across the outside. That shape is what identifies it, so compare it against the trim you are replacing before you order. A standard escutcheon in the same nominal size will not sit right in a slimline body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJet trim is the part everyone touches. The escutcheon dulls and stains, the o-ring hardens, and the eyeball loses the friction that holds it where you aim it. Because the set includes all four pieces, one order refreshes the whole face of the jet.\u003c\/p\u003e","brand":"Hydro Air\/itt Industries","offers":[{"title":"Default Title","offer_id":48627655213268,"sku":"HAI-85-7143","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e31bc606-ee55-4589-8d3d-86de3e6daf14.jpg?v=1788725851"},{"product_id":"hayward-spb151-spa-air-blower-1-5hp-115v","title":"Hayward SPB151 Spa Air Blower 1.5HP 115V","description":"\u003cp\u003eThe Hayward SPB151 is the 1.5HP, 115V unit in the Hayward spa air blower range. It supplies the air that produces the bubble action in a spa or hot tub.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe air blower is often confused with the pump, but the two do different jobs. The pump moves water through the jets. The blower pushes air into the spa air channel, and that is what produces the column of bubbles across the footwell. When the blower fails, the water jets keep working and only the bubbles stop, which is usually how owners spot it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward builds this blower in 1HP, 1.5HP and 2HP, and each size in both 115V and 230V. Those are not interchangeable. Read the label on the unit you are removing and match both the horsepower and the voltage. Fitting a 115V blower to a 230V supply, or the reverse, is the most common mistake on this replacement.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48627718357204,"sku":"HAY-85-1002","price":283.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_67bd1ae9-c027-48c1-aa1c-96c01c68acff.png?v=1788727074"},{"product_id":"2hp-240v-quiet-spa-blower","title":"SuperPro 2 HP 240V Quiet Spa Blower, SUPER240320","description":"\u003cp\u003eThe SuperPro SUPER240320 is a 2 HP quiet spa air blower running on 240 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa blower is separate from the pump. It pushes air into the spa air line, and that air is what turns a plain water jet into the bubbling action a spa is bought for. When the blower fails, the jets keep moving water but the bubbles stop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the voltage. This is the 240 volt unit, and a spa wired for 120 volts needs a different blower. Confirm what is at the spa pack, then order by the part number, SUPER240320.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48627744866516,"sku":"SPG-85-0320","price":340.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-85-0320.png?v=1788727651"},{"product_id":"hydraulic-spa-cover-lift","title":"Cover Valet Hydraulic Spa Cover Lift, CV250","description":"\u003cp\u003eThe Cover Valet CV250 is a spa cover lift for covers up to 7.5 feet across. It is designed for spas with a corner radius of less than 10 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a lifter is worth it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa cover is heavy, awkward and expensive, and most of the damage they take happens on the way off the spa. A lifter carries the weight so the cover folds and swings rather than being dragged over the cabinet edge and dropped on the deck. One person can then open and close the spa without help.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the fit and the style\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo things to confirm before ordering. First, the corner radius: the spa needs less than 10 inches at the corner for this lifter to sit correctly. Second, the style. The product name for the CV250 describes it as hydraulic, while the specification attribute lists the lifter type as non-hydraulic. We have carried both readings here rather than picking one, so ask us if the distinction matters for your installation.\u003c\/p\u003e","brand":"California Home Spas","offers":[{"title":"Default Title","offer_id":48627884458196,"sku":"CHS-85-5002","price":243.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0980bd23-2b45-42ab-8759-18660c0056c9.jpg?v=1788729594"},{"product_id":"polyjet-internal-std-adjustable-deluxe-gray","title":"Waterway Polyjet Internal Standard Adjustable Deluxe, Gray, 210-6087","description":"\u003cp\u003eThe Waterway 210-6087 is the Polyjet internal in the standard adjustable deluxe style, finished in gray. It is the piece that sits in the wall fitting and directs the returning water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInternal, not the whole jet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA Polyjet assembly is built in two parts. The wall fitting is set into the pool structure and stays there. The internal drops into it and is the part that takes the wear, so when a jet will not hold its aim, will not adjust, or has cracked, the internal is what gets changed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis one is gray. If the rest of the jets on the pool are a different color, order to match, because the internal is the visible face of the fitting.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48628744224980,"sku":"WWP-851-8048","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_025f61a0-df09-4e57-bcca-fa7dcc6de232.jpg?v=1788749585"},{"product_id":"2hp-230v-spa-air-blower","title":"Hayward Spa Air Blower 1HP 230V, SPB102","description":"\u003cp\u003eThe Hayward SPB102 is a 1 HP spa air blower running on 230 volts. It supplies the air side of a spa, feeding the bubbler jets and air channels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAir, not water\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA blower is not a pump. It pushes air into the spa air line so the jets break the surface and aerate. When a blower fails, the jets go quiet even though the circulation pump is still running normally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the voltage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 230 volt build. Hayward makes the same blower in a 115 volt version, and the two are not interchangeable, so confirm the supply at the equipment pad before ordering.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48628777058516,"sku":"HAY-85-1001","price":268.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d4142b69-83ae-4b72-8ad1-0f4250ae166c.png?v=1788750482"},{"product_id":"super-pro-25098-000-000-1-s-white-air-control-assembly-for-gunite-fiberglass-spa","title":"SuperPro 1\" S White Air Control Assembly for Gunite\/Fiberglass Spa, 25098-000-000","description":"\u003cp\u003eThe SuperPro 25098-000-000 is a 1 in. S air control assembly in white, for gunite and fiberglass spas. It is the control that sets how much air goes into the jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it changes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpa jets mix air into the water stream. Open the air control and more air is drawn in, which makes the jets feel sharper and run louder. Close it down and the jets go smoother and quieter, and the water holds its heat better because less cool air is being pulled through it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir controls sit in the deck and get handled constantly. Over time the internals stiffen up, the knob loses its travel or the assembly starts weeping around the body. When that happens the whole assembly is replaced rather than repaired. Confirm your existing control is the 1 in. S size before ordering.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48628828209364,"sku":"SPG-85-0050","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_94afc52f-d848-4fde-bb65-56cb72bad079.jpg?v=1788753413"},{"product_id":"gunite-straight-body-power-seat-kit-3-jet-manifold","title":"Waterway Gunite Straight Body Power Seat Kit, 3 Jet Manifold, 210-3410G","description":"\u003cp\u003eThe Waterway 210-3410G is the gunite straight body power seat kit with a three jet manifold. It is the plumbing assembly behind a therapy seat position, supplied as a matched kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStraight body, three jets\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe manifold takes a single supply run and feeds three jet bodies from it. The bodies are the straight pattern, so the run comes into them in line rather than turning through an elbow. Which pattern you need depends on how the seat was laid out, so check the plumbing before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGunite installation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the gunite version of the kit. The bodies are plumbed and positioned during construction, before the shell is shot, which is why it is worth confirming the fitting type and jet count against the plan while the work is still open.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48629285257428,"sku":"WWP-85-3410","price":229.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4827328d-bf4d-4837-a860-4351968ba975.gif?v=1788761926"},{"product_id":"white-1-5-jet-internal-ss-pulsator","title":"CMP Spa Master 1.5\" Gunite Jet Internal Pulsator, Stainless Steel\/White, 23315-030-200","description":"\u003cp\u003eThe CMP 23315-030-200 is a Spa Master 1.5\" jet internal pulsator, finished in white with stainless steel. It is a way to get therapy jet performance out of return locations that already exist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost pool returns end in a plain directional eyeball fitting that pushes a steady stream of water. This jet internal threads into a standard wall fitting with 1.5\" FPT threads and replaces that eyeball with a pulsator, changing what the water does when it leaves the wall. The plumbing behind the wall stays exactly as it is.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCMP lists this internal as a gunite jet internal, and it is described as installing into standard wall fittings with 1.5\" FPT threads. Those two descriptions are both on the product, so the practical check is what is actually in your wall: confirm the fitting is a standard 1.5\" FPT wall fitting and that there is room for the internal to seat before you buy.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48629392441556,"sku":"CTM-85-0131","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d8b7ca33-a9f1-461a-8ffa-b62a5668e9b3.png?v=1788765964"},{"product_id":"air-supply-ultra-9000-blower-1hp-120v-6-0a-2in-fitting-3910131","title":"Air Supply of the Future Ultra 9000 Blower, 1 HP 120V 6.0 Amps, 3910131","description":"\u003cp\u003eThe Ultra 9000 is Air Supply of the Future part 3910131, a 1 HP spa blower running on 120 volts and drawing 6.0 amps. It is intended for OEM installs and portable spas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe noise problem\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA blower sits close to the bather and its noise travels through the spa shell as much as through the air. The Ultra 9000 answers that with a rubber motor mount, which stops motor vibration from being transmitted into the cabinet and the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy blowers fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost blower failures start at the intake, when a small object or a handful of debris gets pulled into the housing. The Ultra 9000 intake manifold was redesigned to prevent that, which is the single biggest change from earlier blowers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and variants\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe connection is a tapered slip fitting, so the plumbing joint is made up without glue or a clamp. Note that the source data lists the fitting as both 2 inch and 2.5 inch, so measure before you order. The Ultra 9000 line is also built in 3 speed and heater versions, so check which one your spa pack expects.\u003c\/p\u003e","brand":"Air Supply of the Future","offers":[{"title":"Default Title","offer_id":48633371656404,"sku":"AIR-85-8509","price":142.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_84e849dd-7073-4536-acef-0d181d005d06.png?v=1788798663"},{"product_id":"air-supply-comet-2000-blower-2hp-120v-3218120f-3220131","title":"Air Supply of the Future Comet 2000 Blower, 2HP 120V 9.0 Amps, 3220131","description":"\u003cp\u003eThe Comet 2000 from Air Supply of the Future is a spa air blower rated 2HP at 120V, drawing 9.0 amps. It is listed as part number 3220131 and also referenced as 3218120F.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuiet is the point\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA blower sits close to the bather, so noise is the thing owners notice. The Comet 2000 is built as a super quiet blower for OEM and portable spas, which is why it shows up as the factory choice on a lot of packaged tubs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to last outdoors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing has high impact resistance at both high and low temperatures, so it holds up through summer heat and winter cold rather than going brittle. The motor is thermally protected, which stops a long run or a restricted air line from cooking the windings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlumbing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe outlet is a tapered slip fitting. It seals on the taper, so the connection needs no glue and no clamps, which also makes the blower easy to pull off again for service.\u003c\/p\u003e","brand":"Air Supply of the Future","offers":[{"title":"Default Title","offer_id":48633451970772,"sku":"AIR-85-8488","price":174.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0ec7ba33-c145-45e9-a9b1-ef33b18e73d6.jpg?v=1788804893"},{"product_id":"balboa-g7415-flothru-heater-4-0kw-230v-w-o-mounting-studs","title":"Balboa G7415 FloThru Heater 4.0kW, 230V, without Mounting Studs, G7415-01","description":"\u003cp\u003eThe Balboa G7415 is a FloThru heater assembly rated at 4.0kW on 230V, supplied in the version without mounting studs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBalboa produces FloThru heaters in more than one wattage and in versions with and without mounting studs. Before ordering, confirm the wattage and voltage marked on the heater you are removing and check whether your installation relies on studs on the heater body or on separate hardware, because this listing has no studs fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart numbering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe heater is referred to as G7415, and the full manufacturer part number is listed as G7415-01. Both refer to this 4.0kW 230V FloThru assembly.\u003c\/p\u003e","brand":"Balboa","offers":[{"title":"Default Title","offer_id":48633672040660,"sku":"BBG7415","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_08570ecb-c595-4f98-92e4-b35d7a7c0a92.png?v=1788808569"},{"product_id":"poly-storm-twin-roto-int-thrd-5-sclp-esc","title":"Waterway Thread-in 5-Scallop Twin Roto Poly Storm Gunite Jet Internal, Black, 229-8121","description":"\u003cp\u003eThe Waterway 229-8121 is a Poly Storm twin roto jet internal for gunite pools. It threads into the existing wall fitting, carries the 5-scallop escutcheon face and is finished in black.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe internal is the visible working part of the jet: the nozzle assembly and the face you see in the wall. The fitting behind it stays plumbed into the shell. That is why a tired, discolored or seized jet is a straightforward swap rather than a plumbing job, and why the part you order has to match the fitting already in the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the rest of the wall\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway makes Poly Storm internals in several face patterns and colors. This one is the 5-scallop face in black. If you are replacing one jet in a row, check the face pattern and the color of the neighbors first, because a mismatched escutcheon is the first thing anyone notices.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48633702777044,"sku":"WWP-85-8625","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f4fa67b3-7396-4e01-9c34-c929a97ac2e5.jpg?v=1788811989"},{"product_id":"poly-jet-internal-pulsator-deluxe-white","title":"Waterway Deluxe Adjustable Scalloped Pulsator Poly Jet Internal, 210-6070B","description":"\u003cp\u003eThe Waterway 210-6070B is the deluxe adjustable scalloped pulsator Poly Jet internal, in white. It is the internal alone, made to go into a Poly Jet wall fitting already set in the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the series first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJet internals are not universal. Waterway builds several series and the internals are not interchangeable between them even when they look close. Twist your existing internal out and compare it to the photograph before ordering, because a Poly Jet internal will not seat in another maker or another series of wall fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the pulsator style, so instead of one continuous stream the flow arrives in pulses. It is adjustable, which means the jet can be turned down or shut off at the face without touching the valves at the equipment pad. The deluxe scalloped face is the trim you see from the water.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48633763889364,"sku":"WWP-85-9518","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/210-6070b-poly-jet-internal-pulsator-deluxe-white.jpg?v=1788814692"},{"product_id":"manifold-1-5-slip-x-1-5-8-3-4-slip-ports","title":"Waterway Manifold, 1.5\" Slip x 1.5\", (8) 3\/4\" Slip Ports, 672-4640","description":"\u003cp\u003eThe Waterway 672-4640 is a water manifold with 1.5\" slip connections at the body and eight 3\/4\" slip ports along it. It is the part that turns one pump discharge line into a bank of individual jet feeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow a manifold is used\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpa plumbing runs a large trunk line from the pump and then branches it down to the small lines that reach each jet. Building that from separate tees is slow and leaves a lot of joints to leak. A molded manifold does the same job in one part, with every branch already sized and spaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes and fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll connections here are slip, so the pipe is solvent welded into the socket. The main line is 1.5\" and the branches are 3\/4\". Measure the pipe you are joining rather than working from the old manifold alone, since spa builders mix sizes on the same pack.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48633766641876,"sku":"WWP-85-8045","price":20.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a008d93d-213d-4bc7-a6d0-a2a0737117e0.jpg?v=1788814836"},{"product_id":"poly-jet-body-1x1-5","title":"Waterway Poly Jet Body 1\" x 1.5\", 211-5860","description":"\u003cp\u003eThe Waterway 211-5860 is a Poly Jet body with 1 inch and 1.5 inch connections. It is the part that gets plumbed into the shell, and the poly jet internal fits into it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing covers the body only. The internal assembly and the trim ring are separate Waterway parts, so order those alongside if you are building a jet from nothing rather than replacing a cracked body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch both connection sizes to the plumbing you already have. Bodies in the Poly Jet line come in more than one size combination, and the two ports on this one are 1 inch and 1.5 inch.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48633767985364,"sku":"WWP-85-8097","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_500a6ef7-66a4-4d73-a64d-3c73a886aa9a.png?v=1788814969"},{"product_id":"spa-jet-1-1-2-water-x-1-air","title":"CMP Spa Jet 1-1\/2\" Water by 1\" Air, 25594-150-000","description":"\u003cp\u003eCustom Molded Products 25594-150-000 is a spa jet body assembly with a 1-1\/2 inch socket for water and a 1 inch socket for air.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow a jet body works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is the part that gets plumbed into the shell. Water comes in through the larger port and air is drawn in through the smaller one, and the jet internal that fits into the body is what mixes them and aims the stream. Because both ports here are sockets, they solvent weld onto pipe rather than threading on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the body assembly only, so if you are also replacing the internal or the escutcheon, order those separately. Match both port sizes to the plumbing you already have, since jet bodies are made in several water and air size combinations.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48633768771796,"sku":"CTM-85-200","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/cmp-25594-150-000-fg-spa-jet-body-assy-1insx15ins.jpg?v=1788815023"},{"product_id":"air-supply-of-the-future-1hp-240v-2-4a-max-spa-air-blower-2510231","title":"Air Supply of the Future 1 HP 240V 2.4A Max Spa Air Blower 2510231","description":"\u003cp\u003eThis is the Air Supply of the Future 2510231, a 1 horsepower spa air blower rated for 240 volts with a maximum draw of 2.4 amps. It is part of the Max line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a blower does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe jet pump moves water. The blower moves air, feeding the spa air channel so the water comes alive with fine bubbles. They are separate systems, which is why a spa can have strong jets and no bubbles at all when the blower has failed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVoltage is the thing to get right. A 240 volt blower belongs on a 240 volt supply and will not simply run slower on 120 volts. Check what your spa pack sends to the blower terminal, and check the current rating against the 2.4 amp maximum here. Our record does not carry a UPC for this unit, so identify it by the part number 2510231.\u003c\/p\u003e","brand":"Air Supply of the Future","offers":[{"title":"Default Title","offer_id":48633781485780,"sku":"AIR-85-8506","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/2510231.jpg?v=1788816203"},{"product_id":"5-scallop-twin-roto-thread-in-poly-storm-gunite-jet-internals-white","title":"Waterway 5-Scallop Twin Roto Thread In Poly Storm Gunite Jet Internals, White, 229-8120","description":"\u003cp\u003eThe Waterway 229-8120 is the Poly Storm gunite jet internal assembly in white, with a five scallop face and twin roto action, in the thread in style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA jet is two parts. The wall fitting is set into the shell during construction and stays there. The internal assembly is the piece that carries the moving face, and it is the part that wears, discolors and stops spinning. This listing is that internal assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThread in, not snap in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway builds internals in both thread in and snap in styles and they are not interchangeable. This one threads into the fitting. Before ordering, take out your existing internal and note how it came out, because a thread in body will not seat in a snap in fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwin roto face\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe twin roto design spins under water pressure to produce a moving, swirling stream rather than a fixed one. When the rotating element seizes or the face is worn, the jet still passes water but loses the action it was built for.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48634021675220,"sku":"WWP-85-8617","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_352865d0-4f4e-4337-9c06-c28c2f7ac908.jpg?v=1788824854"},{"product_id":"14x-25-gecko-4p3w-w-m-t-hl-sensor","title":"Hydro-Quip Gecko 4-Pole 3 Wire Hi Limit Sensor with 1\/4 Inch Bulb, 34-0201","description":"\u003cp\u003eThe Hydro-Quip 34-0201 is a hi limit sensor for Gecko spa controls. It uses the Gecko 4-pole 3 wire connector, has a 1\/4 inch sensing bulb and a 14 inch lead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it protects\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hi limit is the safety sensor at the heater. It is not the one that holds your set temperature; its job is to notice when the water at the heater has gone past a safe point and shut the heater down before anything is damaged or anyone is scalded. Because it is a safety device, a spa will refuse to heat rather than run without a working one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom that leads here\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRepeated overheat or hi limit faults on a spa whose water is plainly not hot. A sensor that has drifted out of range or failed open reports a temperature that is not real, and the controller does the safe thing and locks the heater out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe connector is what matters most. Count the poles and wires on the sensor you are removing and confirm it is the Gecko 4-pole 3 wire style before ordering.\u003c\/p\u003e","brand":"Hydro-Quip","offers":[{"title":"Default Title","offer_id":48634165756116,"sku":"HQP-851-9029","price":74.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/34-0201-14x25-gecko-4p3w-wmt-hl-sensor.jpg?v=1788826041"},{"product_id":"jet-directional-gunite-dk-gry","title":"CMP Spa Master Scalloped Directional Jet Internal, Gunite Dark Gray, 25591-217-000","description":"\u003cp\u003eThe CMP 25591-217-000 is a Spa Master scalloped directional jet internal with a 3.5 inch flange, in dark gray, for gunite pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wall fitting itself is cast into the shell and stays where it is. The internal is the removable part that carries the aimable eyeball and the scalloped face you see from the water. That is the piece that gets brittle, stained or chipped, and it is what this listing covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy aim is worth caring about\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump only moves so much water, and where that water is pointed decides how well the pool turns over. Angling returns so they push surface water toward the skimmer keeps leaves and film moving to where they get collected. A jet aimed at a wall or straight down leaves a dead corner that eventually shows as a stain or an algae patch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDark gray, which sits quietly against darker plaster and tile instead of standing out the way a white fitting does.\u003c\/p\u003e","brand":"CMP","offers":[{"title":"Default Title","offer_id":48634165788884,"sku":"CTM-85-2020","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/cmp-25591-217-000-sm35in-gnt-jetdir-adj-scpn-texdkgy.jpg?v=1788826046"},{"product_id":"poly-storm-twin-roto-int-thrd-5-sclp-esc-1","title":"Waterway Thread-in 5-Scallop Twin Roto Poly Storm Gunite Jet Internal, Dark Gray, 229-8121-DK","description":"\u003cp\u003eThe Waterway 229-8121-DK is a Poly Storm twin roto jet internal for gunite, in the thread-in style with a 5-scallop escutcheon, finished in dark gray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat twin roto means\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInstead of one fixed stream, this internal carries two nozzles that spin as water flows through them. The result is a moving pattern rather than a single point of pressure, which is why roto jets are common on spa benches where the water hits the same spot on your back for a long time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThread-in, not snap-in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis one screws into the wall fitting. Waterway builds internals in both mounting styles and they are not interchangeable, so look at the one you are pulling out. If it unscrews, this is your style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe internal only. The wall fitting is plumbed into the shell and stays there; the internal is the serviceable part that carries the nozzles and the visible face.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48634165919956,"sku":"WWP-85-8664","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_eb81fe82-2327-4bfe-bef1-9d44142340fa.jpg?v=1788826053"},{"product_id":"18-x-9-5-spa-life-tray-table","title":"Life Essentials Spa Life Tray Table, 18\" x 9.5\", LST500","description":"\u003cp\u003eThe Life Essentials LST500 is a spa tray table measuring 18 by 9.5 inches. It adjusts to sit securely on the rim of most spas, giving you a flat surface for a drink, a phone or a book without leaning out of the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a tray beats the deck\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnything set on the surround ends up out of reach, and reaching for it is how glasses go into the water. A tray that rides on the spa edge puts everything at hand height, and it comes away with you when you get out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and use\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tray adjusts rather than being molded for one shell, so it works across a range of spa models. Nothing is fixed to the cabinet: it sets in place, and it lifts off in one movement when the cover goes on. If your spa has an unusually wide or heavily contoured top edge, measure it before ordering.\u003c\/p\u003e","brand":"Life Essentials","offers":[{"title":"Default Title","offer_id":48634263339220,"sku":"SSP-85-5000","price":40.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/life-essentials-lst500-18-x-95-spa-life-tray-table.jpg?v=1788827876"},{"product_id":"jet-grill-flow-path-white","title":"Balboa Micro'ssage Grill and Flow Path Assembly, White, 16-5230WHT","description":"\u003cp\u003eThe Balboa 16-5230WHT is the white grill and flow path assembly used inside HydroAir Micro'ssage spa jets. It is the internal piece that sits behind the visible trim, and it is what separates a Micro'ssage jet from an ordinary fixed therapy jet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater entering the jet is routed through the flow path so the discharge sweeps instead of holding one fixed line. That is the massaging action the jet is named for. When the assembly cracks, wears or seizes, the jet still passes water but the feel goes flat, and owners usually notice the difference on one seat before the others.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and care\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly drops into the existing jet body in place of the old one, so nothing behind the spa shell has to be touched. It is molded plastic and runs without lubrication, so there is no periodic servicing once it is in.\u003c\/p\u003e\u003cp\u003eOrdered in white to suit white jet trim. Check the finish of the jets already in the spa before you order.\u003c\/p\u003e","brand":"Hydro Air\/itt Industries","offers":[{"title":"Default Title","offer_id":48634385301716,"sku":"HAI-85-7299","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f9c60366-3298-4286-9580-62a43ad1ec77.png?v=1788828937"},{"product_id":"11-22-x-3-3-black-headrest-pillow-w-black-stitching","title":"Life Essentials Spa \u0026 Hot Tub Headrest Pillow, Black, LSP202","description":"\u003cp\u003eThe Life Essentials LSP202 is a black spa and hot tub headrest pillow, 11.22 by 3.3 inches, finished with black stitching. It pairs a vinyl outer with a soft foam insert.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWeighted, so it stays put\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe back of the pillow is weighted. That is what separates it from a light foam pad: instead of mounting to a bracket or fighting a suction cup that lets go, it simply sits on the spa lip and stays where you put it. Move it seat to seat as you like.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComfort and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe foam insert takes the hard edge of the acrylic shell out from behind your neck, and the vinyl cover with matching black stitching is meant for a wet environment at the waterline. The black on black finish blends with most spa interiors.\u003c\/p\u003e\u003cp\u003eThis listing is for one pillow.\u003c\/p\u003e","brand":"Life Essentials","offers":[{"title":"Default Title","offer_id":48634393428180,"sku":"SSP-85-5041","price":58.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/life-essentials-lsp202-1122-x-33-black-headrest-pillow-w-black-stitching.jpg?v=1788829108"},{"product_id":"jet-air-iii-body-1-1-2-x-1-1-2","title":"Hayward Jet Air III Body 1-1\/2\" x 1-1\/2\", SP1434PAKA","description":"\u003cp\u003eThe Hayward SP1434PAKA is the Jet Air III body, built with 1-1\/2 inch by 1-1\/2 inch connections. It is the genuine Hayward part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part of the jet this is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA jet assembly has a body that is plumbed into the structure and an internal set of parts that face the water. This listing is the body. It is the piece the water line and the air line connect to, and it is what the rest of the jet mounts into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the sizes first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHayward supplies jet bodies in more than one port combination, so read the sizes off the part you are taking out rather than guessing from the look of it. This one is 1-1\/2 inch by 1-1\/2 inch. Since the body lives behind the shell, getting the size right the first time is worth the extra minute.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48634401816788,"sku":"HAY-85-8136","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1be81d9f-52f4-466d-94b4-3002ab4977e5.jpg?v=1788829140"},{"product_id":"700-series-sensor-kit","title":"Balboa 700 Series Sensor Kit, 30337","description":"\u003cp\u003eThe Balboa 30337 is the dual sensor assembly for 700 series systems. It supplies both sensors the control needs, the hi-limit and the temperature sensor, in one kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat each sensor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe temperature sensor is what the control reads to decide whether to call for heat, and it is the one that gives you a display reading. The hi-limit is a safety device. Its job is to shut the heater down if the water gets too hot, regardless of what the temperature sensor is reporting. They are different components with different failure symptoms, but they live in the same place and are replaced through the same access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes and lengths\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hi-limit sensor has a 1\/4 inch diameter bulb on a 31 inch cable. The temperature sensor has a 3\/8 inch diameter bulb on a 96 inch cable and finishes in a 4 pin white end connector. Compare those against what is in your spa before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross references\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis sensor kit turns up under a number of part numbers depending on where it was bought, including 340202DK, 34-0202D-K, 10283 and 9711-27. If the number on your old assembly is one of those, this is the same kit.\u003c\/p\u003e","brand":"Balboa Instruments","offers":[{"title":"Default Title","offer_id":48634422952148,"sku":"BAL-851-1075","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d384bec6-1d05-44ed-84be-dfa1af928e3d.jpg?v=1788830339"},{"product_id":"manifold-2-slip-x-2-slip-6-3-4-ports","title":"Waterway Manifold 2\" Slip x 2\" Slip with Six 3\/4\" Ports, 672-4270","description":"\u003cp\u003eThe Waterway 672-4270 is a spa manifold with 2 inch slip connections on both ends and six 3\/4 inch ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a manifold does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the piece that turns one trunk line into a set of jet lines. Water comes in through the 2 inch slip inlet, feeds the six 3\/4 inch ports, and carries on out through the 2 inch slip outlet. Because the outlet is a full 2 inch, the run does not dead end at the manifold, so more manifolds can follow it where a spa needs more jets than six.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlumbing notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 2 inch ends are slip, which means solvent welded rather than threaded. The 3\/4 inch ports take the jet line fittings, and any port that is not being used is plugged rather than left open. The 3\/4 inch inside plugs are sold separately.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48634473218260,"sku":"WWP-851-7002","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7e919451-7706-4962-b6dd-772e08281808.jpg?v=1788831839"},{"product_id":"waterway-plastics-poly-storm-gunite-jet-internals-directional-5-scallop-white","title":"Waterway Poly Storm Gunite Jet Internal, Directional 5-Scallop White, 229-8050","description":"\u003cp\u003eThe Waterway 229-8050 is the Poly Storm gunite jet internal in the thread-in directional style, with a textured 5-scallop face in white. It measures 3-3\/8 inch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat part of the jet this is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA gunite jet is built in two halves. The body is plumbed and set into the shell when the pool is built, and it stays there. The internal is the piece you see and the piece that wears, and it threads into that body. That means a tired or discolored jet is a straightforward replacement without touching the plumbing behind the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional face\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe directional internal lets the stream be aimed, so flow can be pointed along a bench, away from a seat, or toward a corner that needs circulation. The 5-scallop textured face is the Poly Storm look, so it will match other Poly Storm jets on the same shell and will not match a different series.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48634490716372,"sku":"WWP-85-8615","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b70ed76e-3ba7-4365-b522-aa837e5bdcbb.jpg?v=1788832564"},{"product_id":"fitting-bearing-white","title":"Balboa Convertassage Wall Fitting with Bearing, White, 56-5215WHT","description":"\u003cp\u003eThe Balboa Water Group 56-5215WHT is the Converta'ssage wall fitting with bearing, in white. It is the replacement component for HydroAir Convertassage jet systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the bearing does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe fitting carries an internal bearing that is driven by the water passing through it. That is what produces the rotational movement the Convertassage jet is known for, and because it runs on flow rather than on grease, there is nothing to lubricate or service. When the bearing wears, the jet keeps passing water but the sweeping motion fades, which is usually the first sign the fitting needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is white plastic, chosen to sit unobtrusively against most spa interiors, and it is built to last as a permanent replacement rather than a temporary patch. The bearing comes as part of the fitting, so this is a single piece swap.\u003c\/p\u003e","brand":"Hydro Air\/itt Industries","offers":[{"title":"Default Title","offer_id":48634500939988,"sku":"HAI-85-8115","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_23bf2531-ba01-43a8-9196-5c2d9332648f.png?v=1788832924"},{"product_id":"hydroquip-80-11774-k-j-j-l-w-m-c-control-panel-overlay","title":"Balboa HydroQuip J\/J\/L\/W\/M\/C Control Panel Overlay, 80-11774-K","description":"\u003cp\u003eThe 80-11774-K is the control panel overlay for the J\/J\/L\/W\/M\/C button layout used on HydroQuip spa control systems. It is the printed face that sits over the panel buttons.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy overlays fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA topside panel takes steam from underneath, splash from above and sun all day. The printing fades, the edges lift and eventually water gets behind it. None of that means the electronics have failed, which is why an overlay is often the whole repair.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the layout first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOverlays are specific to the button arrangement. Look at the lettering on your current panel and count the buttons before ordering so the new face lines up with the switches beneath it.\u003c\/p\u003e","brand":"Balboa","offers":[{"title":"Default Title","offer_id":48634590626004,"sku":"HQP-851-0106","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b7222c6e-87d0-4575-8f84-ee8deba0d0d5.png?v=1788835141"},{"product_id":"brown-mushroom-air-button","title":"Tecmark Brown Mushroom Air Button, PT13130-02","description":"\u003cp\u003eThe Tecmark PT13130-02 is a Tri Delta raised cone mushroom air button in brown. It is the push button side of a pneumatic spa control, the piece that sits in the deck or skirt where you press it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the control works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePressing the button squeezes air down a length of tubing to an air switch at the equipment pack, and that switch does the actual electrical work. Because the button carries only air, nothing live reaches the wet surface where the bather touches it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eButtons crack, take on water and lose their spring long before the switch behind them fails. If the equipment no longer responds to a press, replacing the button is the cheap first move.\u003c\/p\u003e","brand":"Tecmark","offers":[{"title":"Default Title","offer_id":48634720223444,"sku":"TDI-85-1007","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/pt13130-02-brown-mushroom-air-button.jpg?v=1788836568"},{"product_id":"3-8-top-flo-air-injector","title":"Waterway 3\/8\" Top Flo Air Injector, 670-2300","description":"\u003cp\u003eThis is the Waterway 670-2300, a 3\/8 inch air injector from the Top Flo line. It is the genuine Waterway part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe injector needs a 1-3\/16 inch hole to install. That is the one measurement to confirm before you order, because an opening cut for a different injector will not let this one seat and seal. The 3\/8 inch in the name refers to the air line the injector takes, not the hole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir injectors live in a hard spot: constant wet, constant air, and whatever the water chemistry is doing. They scale up internally and eventually crack. The symptom is a weak or uneven bubble pattern that does not come back when you open the air control or clear the line. At that point the injector is the part to change, and swapping in a fresh one restores the pattern without touching the surrounding plumbing.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48635036467412,"sku":"WWP-85-8245","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7f9e1a01-40ad-4981-a0f0-c8b073c96efd.jpg?v=1788840157"},{"product_id":"waterway-poly-storm-jet-body-white-218-6610","title":"Waterway Poly Storm Jet Body, White, 218-6610","description":"\u003cp\u003eThe Waterway 218-6610 is the Poly Storm jet body in white. It is the housing side of the jet, the part the internal assembly seats into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a jet body is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa jet is built in layers. The body is plumbed into the shell and carries the water and air connections. The internal assembly, the part with the moving nozzle, drops into that body from the inside of the tub, and the escutcheon trims it off. This listing covers the body alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the series\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway builds several jet families and their parts do not cross over. Poly Storm parts fit Poly Storm jets. Before ordering, pull an internal out and confirm which series the tub is running, because a body from the wrong family will not take the internal you already have.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48635039056084,"sku":"WWP-851-1004","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/218-6610-diffuser-diverter-storm-jet.jpg?v=1788840352"},{"product_id":"lock-ring-3","title":"Hayward Lock Ring SPX1419D1","description":"\u003cp\u003eThe Hayward SPX1419D1 is the lock ring for an eyeball return fitting. It threads into the wall fitting and traps the eyeball and its seat, which is what keeps the return aimed where you set it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring is the part that takes the strain every time somebody twists the eyeball to change the flow direction, and it sits in sunlight and pool water for years. Most of the ones that come out are cracked from over tightening or have simply gone brittle. Once the ring splits, the eyeball works loose and the return sprays wherever it likes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the ring alone, sized 2.25 in by 0.5 in. Eyeball fittings and seats are ordered separately, so check whether those parts are still sound before you take the wall fitting apart. Thread the new ring in hand tight and leave it there.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48635041415380,"sku":"HAY-251-1978","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6916bab3-3d7f-461f-a10f-dcb3863f2cb0.jpg?v=1788840410"},{"product_id":"boulder-springs-slide-rock-right-turn-complete-tan-with-rustic-sandstone","title":"Interfab Boulder Springs Slide Rock | Right Curve Rustic Sandstone | 5200-SS-29","description":"\u003cp\u003eInter-Fab Boulder Springs Slide Rock | Right Curve Rustic Sandstone | 5200-SS-29\u003c\/p\u003e","brand":"Interfab","offers":[{"title":"Default Title","offer_id":48647361036500,"sku":"HRL-35-1250","price":3180.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/46922_1_2010922103316.jpg?v=1789034207"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/spa-parts.oembed?page=5","provider":"Active Pool Supply","version":"1.0","type":"link"}