{"title":"Spa Pumps","description":"\u003cp\u003eShop spa pumps at Active Pool Supply, with genuine OEM and quality aftermarket options.\u003c\/p\u003e","products":[{"product_id":"balboa-1070021-circulation-pump-1-speed-0-25-hp-230v-1-1-a-60-hz","title":"Balboa 1070021 Spa Circulation Pump, 1-Speed, 0.25 HP, 230V, 1.1A, 60Hz","description":"\u003cp\u003eThe Balboa 1070021 is a one speed circulation pump for spas and hot tubs. It runs continuously at low flow to keep water moving through the heater and filter, which is what holds the temperature steady and keeps the water clear between soaks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e0.25 HP, 230 V, 1.1 A, 60 Hz, on a standard 10-frame, with a 120 in. cord fitted with an AMP plug for the spa pack. It is built by Balboa Water Group.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 1070021 is the current replacement for Balboa 1030056 and 1070056 circulation pumps. Check the horsepower, voltage, amperage, frame size and cord against the label on your existing pump before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the circ pump matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a circulation pump fails the heater cannot run safely and filtration stops, so a worn or noisy one is worth replacing before it quits. A working circ pump also takes load off the rest of the system.\u003c\/p\u003e","brand":"Balboa Instruments","offers":[{"title":"Default Title","offer_id":48624877142228,"sku":"BAL-85-2000","price":295.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_57e2aa40-2cde-4f5d-baec-095dbed5d55b.png?v=1788648495"},{"product_id":"balboa-5235212-s-ultimax-pump-4hp-230v-12-0-amp-2-speed-2-suction-port","title":"Balboa Ultimax Pump, 4HP 230V, 12.0 Amp, 2 Speed","description":"\u003cp\u003eThe Balboa 5235212-S is an Ultimax spa pump rated 4 HP at 230 volts and 12.0 amps, running two speeds through a 2 in. suction port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed carries the circulation and filtration load, where quiet running and low draw matter. High speed is there for the jets. One pump covers both instead of asking a single speed motor to do circulation work it was never sized for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Ultimax range\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBalboa positions Ultimax as its benchmark for design flexibility and performance, used from small applications like zone seating and focused therapy right up to multi pump configurations driving 100 or more jets. The range is built for long service life under that kind of duty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch three things to your existing pump: the voltage, the horsepower and the suction port size. This one is 230 volts, 4 HP and a 2 in. port.\u003c\/p\u003e","brand":"Balboa","offers":[{"title":"Default Title","offer_id":48625723736276,"sku":"BAL-10-1002","price":307.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a9c2ff95-05f6-4426-939b-560ba7f0c02c.png?v=1788690076"},{"product_id":"balboa-dura-jet-spa-pump-1hp-2-speed-48-frame-115v-4239110-s","title":"Balboa Dura-Jet Spa Pump, 1HP 2-Speed 48 Frame 115V","description":"\u003cp\u003eThe Balboa Dura-Jet 4239110-S is a 1 horsepower two speed spa pump on 115 volts, built on a 48 frame motor with a compact volute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed handles circulation and heating. It is quiet, it draws little power, and it is what the pump should be doing most of the day. High speed is reserved for the jets. Splitting those two jobs across one pump is the reason a two speed unit costs less to run than a single speed of the same size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for spa conditions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery seal in the pump uses carbon ceramic faces with Viton elastomers. That combination is specified because spa water sits hot and heavily sanitized for years at a time, and standard seal materials harden and leak under those conditions. The impeller is designed for higher efficiency flow than others in its horsepower class, and Balboa rates the Dura-Jet family as capable of flow rates exceeding 210 gallons per minute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe small volute and the 48 frame footprint are the practical advantage here: this pump goes into bays that will not take a bigger body. Check the union sizes and the port orientation on your existing pump before you order, and confirm the spa pack is wired for 115 volts.\u003c\/p\u003e","brand":"Balboa","offers":[{"title":"Default Title","offer_id":48625785012436,"sku":"BAL-10-1008","price":278.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_72993c46-508f-45da-8ae6-bb26e3517e17.png?v=1788692314"},{"product_id":"fmxp2e-spa-pump-5hp-230v-2-speed","title":"Aqua-Flo FMXP2E Spa Pump, 5 HP 230V 2 Speed","description":"\u003cp\u003eThe Aqua-Flo FMXP2E, part number 05340009-5040, is a 5 HP two speed spa pump running on 230 volts. It is the largest rating in the two speed FMXP2E line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa asks a pump to do two different jobs. Most of the day it only needs to move water slowly through the heater and filter, and doing that on low speed is quieter and cheaper to run. When the jets come on it needs everything the motor has. A two speed pump covers both without a second pump plumbed in beside it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing an existing pump\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the part number where you can. FMXP2E pumps are built in several horsepower ratings and configurations, and the voltage is not interchangeable, so read the label on the old pump and confirm the 230V supply at the spa pack before the new one comes out of the box.\u003c\/p\u003e","brand":"Allied Innovations","offers":[{"title":"Default Title","offer_id":48625786028244,"sku":"AQF-10-468","price":472.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f5bec183-1f33-432c-8d08-72377eff0d51.jpg?v=1788692462"},{"product_id":"executive-5-hp-2-speed-2-56-frame-230-volt-pump","title":"Waterway Executive 5 HP 2 Speed 2\" 56 Frame 230 Volt Pump","description":"\u003cp\u003eThe Waterway Executive 3722021-1D is a 5 HP two speed spa pump on a 56 frame motor, plumbed 2 inch on both the intake and the discharge and wired for 230\/240 volts. It draws 16.4 amps on high speed and 4.8 amps on low.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed pump runs flat out whether the spa is filtering or in use. Two speeds split that job: the low speed turns the water over quietly and cheaply through the filter cycle, and the high speed is there when the jets are on. On a system plumbed for it, that is the difference between a pump that runs all day and a power bill that does the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing and fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 56 frame version, which is the heavier motor frame, and it is a 2 inch by 2 inch pump. Check the frame size, the port sizes and the voltage on the pump you are replacing before ordering, because 48 frame and 56 frame units do not swap freely on a spa base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross reference\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump is also referenced as PF-50-2N22C. If that is the number on the old label, compare the voltage, amperage and port sizes here against it.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626378604756,"sku":"WWP-10-1423","price":424.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0b502cf9-70ee-4923-b64b-ec16485e42c5.jpg?v=1788709513"},{"product_id":"1-5hp-executive-spa-pump-2-speed-115v-48fr-2","title":"Waterway 1.5HP Executive Spa Pump, 2 Speed, 115v, 48fr, 2\"","description":"\u003cp\u003eThis is the Waterway Executive spa pump rated at 1.5 horsepower, two speed, 115 volt, built on a 48 frame motor with 2 inch suction and discharge. Waterway part number 3420610-1A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa asks a pump to do two very different things. Most of the time it just needs slow, quiet water movement to hold temperature and keep the sanitizer distributed, and that is what low speed is for. When the jets are turned on, high speed delivers the pressure they need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree numbers decide whether a spa pump drops into an existing cabinet: the motor frame, the voltage and the port size. This one is 48 frame, 115 volt and 2 inch. Check all three against the pump coming out, because a mismatch on any of them means new plumbing or new wiring.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626496667860,"sku":"WWP-10-1001","price":379.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ccbb9c1f-c3c5-4130-ade4-370f3a8ba832.png?v=1788710958"},{"product_id":"balboa-dura-jet-pump-48-frame-2-0hp-2-speed-115v-djayfa","title":"Balboa Dura-Jet Pump, 48 Frame 2.0 HP 2 Speed 115V","description":"\u003cp\u003eThe Balboa Dura-Jet 4239113-S, model DJAYFA, is a 2.0 HP two speed spa pump running on 115 volts in a 48 frame. Balboa Water Group built the Dura-Jet line around consistent quality and long service life, and it is a common choice when a spa pump needs replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for heat and chemicals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll the seals are carbon ceramic with Viton elastomers. That combination is specified because a spa pump lives in hot, chemically treated water for years, which is exactly the condition that ends cheaper seal materials early.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlow from a small body\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller design is where the Dura-Jet earns its name. Balboa states flow rates that can exceed 210 gallons per minute, from a smaller horsepower motor than comparable pumps in the class. The volute is petite and the frame is a compact 48, so the whole pump goes into equipment bays that will not accept a larger unit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it in\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wet end offers multi-directional volute mountings and a three position drain plug, which means the plumbing can be oriented to match the bay rather than the other way round. This pump is 60 Hz. If your installation is 230 volt, Balboa builds the same Dura-Jet under a separate part number.\u003c\/p\u003e","brand":"Balboa","offers":[{"title":"Default Title","offer_id":48626582683860,"sku":"BAL-10-1009","price":281.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c4fb2f4a-3b1e-42d4-a9e9-567143fec1ed.png?v=1788712707"},{"product_id":"4hp-executive-spa-pump-2-speed-230v-56fr-2","title":"Waterway 4HP Executive Spa Pump, 2 Speed, 230v, 56fr, 2\"","description":"\u003cp\u003eThe Waterway 3721621-1D is a 4HP Executive series spa pump, two speed, wired for 230 volts, on a 56 frame motor with 2 inch suction and discharge ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speed matters on a spa\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa spends most of its running hours filtering and heating, which needs very little flow. The low speed does that work quietly and cheaply. When the jets are called for, the high speed steps in and delivers the flow the therapy jets were designed around. One pump covers both jobs instead of running flat out all day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck three things against the pump you are replacing: the supply voltage, the motor frame and the port size. This unit is 230v on a 56 frame with 2 inch ports, and all three have to match for a straight swap. Waterway lists it for spa and hot tub use.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627005882580,"sku":"WWP-10-1410","price":346.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_13e39f80-588e-4739-a7d8-2a61cbcdc841.jpg?v=1788718988"},{"product_id":"flo-master-xp2-2-hp-2-speed-230v","title":"Aqua-Flo Flo-Master XP2 2 HP 2 Speed 230V","description":"\u003cp\u003eThe Flo-Master XP2 from Aqua-Flo by Gecko is a two speed 230V spa pump rated 2.0 operational horsepower and 3.0 total horsepower, on a 48 frame motor with 2 inch ports. It is the OEM pump, part number 06120500-2040.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA two speed pump runs slowly for filtration and circulation, then steps up to full speed for the jets. That is what lets a spa keep the water turning over without running a big motor around the clock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe horsepower question\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn 2012 the manufacturer changed how these pumps are rated. Aqua-Flo pumps now carry both an operational horsepower and a total horsepower figure, where older ones quoted operational horsepower only. If you are replacing an older Aqua-Flo, match the operational rating, which is 2.0 HP here, and ignore the 3.0 total figure for that comparison. Getting this backwards is the most common ordering mistake on these pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the 48 frame motor, the 2 inch port size and the 230V supply against your existing installation before ordering, since all three have to line up.\u003c\/p\u003e","brand":"Gecko Alliance - Pump Division","offers":[{"title":"Default Title","offer_id":48627202654420,"sku":"AQF-10-466","price":394.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9db876d7-c624-40b4-9661-25f510b53aa3.jpg?v=1788720046"},{"product_id":"aquaflo-06115000-1040-flomaster-xp2-48-frame-115v-2-0-hp-1-5-ophp-2-speed","title":"Aqua-Flo Flo-Master XP2, Side Discharge, 48-Frame 115V 2.0 HP 1.5 OPHP 2-Speed","description":"\u003cp\u003eThe Aqua-Flo Flo-Master XP2, part number 06115000-1040, is a side discharge pump on a 48-frame 115V motor, rated 2.0 HP with 1.5 OPHP and wired for two speeds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the pump you are replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree things decide whether a spa pump drops straight in: the frame size, the discharge position and the voltage. This one is 48-frame, side discharge and 115V. Check all three against what is fitted now, because a center discharge or 230V unit of the same horsepower will not simply swap over.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed handles the long filtration and circulation hours at a fraction of the power draw. High speed is there when the jets need real flow. On a spa the low speed hours are where a two speed pump pays for itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOn the horsepower rating\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump carries two numbers, 2.0 HP and 1.5 OPHP, and different listings lead with one or the other. Both refer to this same part, 06115000-1040.\u003c\/p\u003e","brand":"Allied Innovations","offers":[{"title":"Default Title","offer_id":48627344834772,"sku":"AQF-10-372","price":335.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b3995f1b-6993-4f21-ab96-8a3fb8b16fcf.png?v=1788722694"},{"product_id":"1-15-hp-iron-might-single-speed-spa-pump-115v","title":"Waterway 1\/15 HP Iron Might Circulation Pump, Single Speed, 115V","description":"\u003cp\u003eThe Waterway Iron Might is a single speed circulation pump for spas and hot tubs, running on 115V with a 48 frame motor. It is the complete pump, model CP-1\/8-1N11A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCirculation, not jets\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA circulation pump has a different job from a jet pump. It moves water quietly and continuously through the heater, the filter and any ozone or sanitizer equipment, around the clock. That is why the Iron Might delivers 40 GPM on only 1.3 amps: the priority is running all day at a cost you can ignore, not producing pressure at the jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe rating on the label\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis pump carries two horsepower figures. It is listed at 1\/15 HP and was previously sold as 1\/8 HP. The output is the same, only the rating changed, so a pump bought under either number does the same work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild and plumbing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing uses a side discharge for better flow and easier routing at the pack, with 1-1\/2 inch intake and discharge. Viton seals handle water carrying sanitizer and ozone better than standard materials. Union assemblies are available separately to suit different plumbing. The pump carries a one year warranty.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627695059156,"sku":"WWP-10-1432","price":271.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d07daa5c-64fa-4c3a-bc2a-98a3bd24fcbf.jpg?v=1788726687"},{"product_id":"02115000-1010-aqua-flo-fmhp-spa-pump-1-5hp-115v","title":"Aqua-Flo Flo-Master FMHP Spa Pump 1.5 HP 115V 2 Speed","description":"\u003cp\u003eThe Aqua-Flo Flo-Master FMHP, part number 02115000-1010, is a 1.5 HP two speed spa pump on a 115 V, 48 frame motor with a side discharge wet end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speed matters on a spa\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed handles filtration and circulation while the heater runs, quietly and at lower draw. High speed is there for the jets. Running a spa on a single speed pump means choosing between the two, so most spa packs are built around a two speed pump like this one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the replacement right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpa pumps are sold in a long grid of variations: horsepower, voltage, one or two speed, frame size, and the direction the discharge faces. The safest approach is to match the complete Aqua-Flo part number, 02115000-1010, against the label on the pump you are taking out, and to check that the plumbing meets a side discharge before you commit.\u003c\/p\u003e","brand":"Allied Innovations","offers":[{"title":"Default Title","offer_id":48627721044180,"sku":"AQF-10-357","price":230.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8274de41-e689-402e-894e-74540c00f761.jpg?v=1788727248"},{"product_id":"5hp-executive-spa-pump-2-speed-2-1-2-x-2-56fr-230v","title":"Waterway 5 HP Executive Spa Pump, 2 Speed, 2-1\/2\" x 2\", 56 Frame, 230V","description":"\u003cp\u003eThe Waterway Executive 3722021-13 is a 5 HP two speed spa pump on a 56 frame motor, wired for 230V, with 2-1\/2 in and 2 in plumbing connections. It is the large end of the Executive line, intended for spas and hot tubs rather than for small portable units.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA two speed pump gives you a low setting and a full output setting from one motor. That is what lets a spa circulate quietly for filtration and then come up to full jet output on demand, without a second pump in the pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree things have to match on a spa pump swap: the voltage, the motor frame and the plumbing. This one is 230V, 56 frame, and 2-1\/2\" x 2\". Check all three against what is in the equipment bay, because a pump that is right on two of them and wrong on the third still will not go in.\u003c\/p\u003e\u003cp\u003eOrder by part number 3722021-13 to get this exact configuration from the Executive range.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48628798161108,"sku":"WWP-10-1451","price":457.51,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9cfbb05c-8607-42a1-b9af-e94e5d26da72.jpg?v=1788750848"},{"product_id":"flo-master-fmcp-48-frame-pump-1-5-1-5-hp-115v-14-4-amp","title":"Aqua-Flo Flo-Master FMCP 48 Frame Pump, 1.5 in., 1.5 HP, 115 V, 14.4 Amp","description":"\u003cp\u003eThe Aqua-Flo Flo-Master FMCP is a complete 48 frame spa pump rated 1.5 HP, 2 speed, on a 115 V supply drawing 14.4 amps, with 1.5 in. connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA two speed spa pump runs quietly at low speed to turn the water over and carry it through the heater, then steps up to high speed to drive the jets. That is why two speed pumps stay popular on spas: the filtration hours cost far less to run.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCenter discharge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFMCP is the center discharge version of the Flo-Master. Before ordering, check the discharge orientation, the frame size and the connection size against the pump you are taking out, since those are what decide whether the new pump drops into the existing plumbing.\u003c\/p\u003e","brand":"Allied Innovations","offers":[{"title":"Default Title","offer_id":48628814414036,"sku":"AQF-10-382","price":379.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_165bfd1a-6036-48c5-ac77-04d0d2f876e5.jpg?v=1788752362"},{"product_id":"1-5-hp-230v-2sp-flo-master-xp2-pump","title":"Aqua-Flo Flo-Master XP2 Pump, 1.5 HP, 230 V, 2 Speed","description":"\u003cp\u003eThe Flo-Master XP2 from Aqua-Flo by Gecko is a complete spa pump rated 1.5 HP on 230 V, with two speeds and 2 in. inlets and outlets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePerformance in a standard footprint\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eXP2 is the high performance pump in the Aqua-Flo range, and it delivers that while taking up the same space most other spa pump applications allow for. The 2 in. connections are what let it move enough water to drive a full set of jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed handles filtration and heating quietly and cheaply, and high speed is there when the jets are running. That split is what keeps the running cost of a spa reasonable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the voltage, the plumbing size and the discharge orientation of the pump you are replacing. Those three decide whether a pump drops into the existing pack without replumbing.\u003c\/p\u003e","brand":"Gecko Alliance","offers":[{"title":"Default Title","offer_id":48628814676180,"sku":"AQF-101-9964","price":320.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7f29c4be-5cd2-4560-a239-a4293076883c.jpg?v=1788752366"},{"product_id":"1hp-2-speed-fmcp-spa-pump-120v","title":"Aqua-Flo 1 HP 2-Speed FMCP Spa Pump, 120V","description":"\u003cp\u003eThe Aqua-Flo Flo-Master FMCP is a 1 horsepower two speed spa pump on a 48Y frame, with the discharge at the center of the top of the pump in a 1-1\/2 inch male buttress thread. It is supplied with quick release compression fittings so it can be taken off the plumbing without cutting pipe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh speed pulls 9.8 amps and drives the jets. Low speed pulls 3.8 amps and handles circulation and filtering. Running the low speed for the long daily filter cycle is what keeps the running cost down, and it is the reason a two speed pump suits a spa better than a single speed of the same rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAqua-Flo positions the Flo-Master CP line at entry level and mid range spas and at booster jet duty, with a high performance impeller and an upgraded shaft seal. Rated flow is up to 150 GPM at 115 volts, 60 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump does not include a power cord; cord type is listed as none. Check your existing plumbing size and frame before swapping, and match the discharge position, which is center top on this model.\u003c\/p\u003e","brand":"Spa Parts Plus","offers":[{"title":"Default Title","offer_id":48628828569812,"sku":"PEX-85-8552","price":396.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5016d610-42e7-4669-bbf0-1f043af6809b.jpg?v=1788753468"},{"product_id":"balboa-ultimax-5235208-s-pump-2hp-230v-8-8-amp-2-speed-2-suction-port","title":"Balboa Ultimax Pump, 2HP 230V, 2 Speed, 2 Inch Suction Port","description":"\u003cp\u003eThe Balboa Water Group Ultimax 5235208-S is a two speed spa pump rated 2 HP at 230V, drawing 8.8 amp, with a 2 inch suction port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa pump does two different things. It circulates water quietly through the filter for most of the day, and it drives the jets when someone is in the tub. A two speed pump splits those jobs: low speed handles filtration without noise or wasted power, high speed delivers the flow the jets need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Ultimax line\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBalboa positions Ultimax as its benchmark for design flexibility and performance. The range spans small installations such as zone seating and focused therapy through to multi pump configurations built to run systems of 100 or more jets, which is why the same series shows up in very different sized spas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm three things against your existing pump: the 2 inch suction port, the 230V supply and the 8.8 amp draw. Port size and voltage are what decide whether a pump drops into the plumbing and the pack you already have.\u003c\/p\u003e","brand":"Balboa","offers":[{"title":"Default Title","offer_id":48628866154708,"sku":"BAL-10-1000","price":287.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7f642120-628a-4930-b9c1-115ad0933ea5.png?v=1788756775"},{"product_id":"flo-master-fmhp-side-discharge-48-frame-pump-2-hp-2-speed-230-v","title":"Aqua-Flo Flo-Master FMHP Side Discharge 48 Frame Pump, 2 HP, 2-Speed, 230 V","description":"\u003cp\u003eThe Aqua-Flo Flo-Master FMHP in this configuration is a 2 HP, two speed, 230 volt pump on a 48 frame motor, with a side discharge wet end. Aqua-Flo lists it as part number 02120000-1010.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat two speed buys you\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed moves water quietly for filtration and for carrying heat, and high speed is there when the jets are running. Because most hours are spent on low, a two speed pump does the same daily work as a single speed one while spending far less of the run time at full draw.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree details have to match: the side discharge orientation, the 48 frame motor and the 230 volt supply. This part number covers all three, so if your existing pump differs on any of them, check the number on the old unit rather than going by horsepower alone.\u003c\/p\u003e","brand":"Allied Innovations","offers":[{"title":"Default Title","offer_id":48628898201812,"sku":"AQF-10-400","price":284.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d0fbcb9d-68d2-4b51-8cf6-2833e7a5bc3b.jpg?v=1788757111"},{"product_id":"02115005-1010-1-1-2-hp-2-speed-flo-master-fmhp-pump-230v","title":"Aqua-Flo 1-1\/2 HP 2-Speed Flo-Master FMHP Pump, 230V","description":"\u003cp\u003eThis is the Aqua-Flo Flo-Master FMHP in the 1-1\/2 HP, two speed, 230 volt configuration, side discharge, on a 48 frame motor. The part number is 02115005-1010.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow speed handles circulation and filtration, which is most of the hours a spa pump runs, and it does that quietly and on far less power. High speed is there for the jets. The speed is selected by the spa pack, timer or two speed switch on the system, so the pump needs a control that can call for both.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree things decide whether a pump drops straight in: the voltage, the frame size and the discharge orientation. This one is 230V on a 48 frame with side discharge. Confirm each against the pump you are pulling out before the plumbing comes apart, and check the union sizes at the same time, since the Flo-Master range covers several combinations.\u003c\/p\u003e","brand":"Allied Innovations","offers":[{"title":"Default Title","offer_id":48629182398676,"sku":"AQF-10-399","price":228.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a38bb140-6359-40b7-b765-7e99991a4e96.jpg?v=1788760063"},{"product_id":"tiny-might-complete-spa-circulating-pump-1-union-230v","title":"Waterway Tiny Might Complete Spa Circulating Pump, 1\" Union, 230V","description":"\u003cp\u003eThis is the Waterway Tiny Might complete spa circulating pump in the 230V, 1 inch union configuration. It is supplied as the genuine Waterway pump and motor with the insulated wet end, listed under model TM-0061N22C3 and JF1GO74N.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a circulation pump is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAt 1\/16 HP and a single speed, this pump is not there to drive jets. It keeps water moving continuously through the spa so that heat is distributed evenly and sanitizer reaches the whole body of water rather than sitting in a stagnant corner. That constant low flow is also why circulation pumps run far more hours than a jet pump and eventually wear out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck before you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo things decide whether this is the right pump. The first is voltage: this one is 230V at 50 or 60 Hz, and the same Tiny Might is built in 115V as well. The second is the plumbing. The source gives the inside connection as 1\/2 inch slip and the outside as a 1 inch threaded union measuring 1-7\/8 inches, while the image caption reads 1 inch slip by 1 inch union, so measure what is on your spa rather than assume.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it was fitted\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Tiny Might turned up in a great many spas and hot tubs, Sundance and Sunbelt among them. If your old pump carries the TM-0061N22C3 or JF1GO74N marking, this is its replacement.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48629282865364,"sku":"WWP-10-1430","price":231.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8ffb8d7f-967f-46bf-9031-bab9ba925a5b.jpg?v=1788761903"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/spa-pumps.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}