{"title":"Sta-Rite Max-E-Pro Pump Parts","description":"\u003cp\u003eReplacement parts for Sta-Rite Max-E-Pro Pump, genuine OEM and compatible aftermarket.\u003c\/p\u003e","products":[{"product_id":"tank-body-assembly","title":"Sta-Rite Pump Tank Body Housing Assembly, IntelliPro","description":"\u003cp\u003eThe Sta-Rite 17307-0110S is the tank body assembly, the strainer pot housing, for the IntelliPro VS 3050 and other IntelliPro variable speed pumps, the Max-E-Pro series and the Pentair Pinnacle. It is the genuine Pentair Sta-Rite part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing is the part that takes the abuse: freeze damage over a winter, a crack from an impact, or a drain plug port that has been overtightened until it will no longer seal. Once the body itself is compromised, a new o-ring or plug will not stop the leak and the housing has to be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is and is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the tank body on its own. The trap cover lid assembly, the V clamp that holds the lid, and the drain plug are separate part numbers. If any of those are damaged too, order them alongside the housing so the pump goes back together in one visit.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624918888660,"sku":"STA-101-1003","price":313.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3c6d6eff-9567-4058-8e6f-d666d4a4e752.jpg?v=1788653419"},{"product_id":"tank-body-assembly-max-e-glas-ii-and-dura-glas-ii","title":"Sta-Rite Tank Body Assembly for Max-E-Glas II and Dura-Glas II","description":"\u003cp\u003eThe Sta-Rite C176-59PZ is the genuine tank body assembly for the Max-E-Glas II and Dura-Glas II pumps, the series also listed as P4R, P4RA, P4E and P4EA. The tank body is the strainer pot on the front of the pump, and this assembly arrives with the trap cover, cover o-ring and strainer basket already included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is needed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe strainer pot takes the abuse on a pump: freeze expansion, over tightened suction fittings and years of sun. Once it cracks, the pump draws air, loses prime and cavitates, and there is no reliable way to patch it. Replacing the assembly puts a sound pot, a fresh lid and a new basket on the pump in one step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is held to the seal plate by the tank body V clamp, which is a separate part. Check it for corrosion when the old body comes off. If the diffuser o-ring or the trap cover o-ring on your old pump were the reason it was losing prime, this assembly covers the cover o-ring, and the diffuser o-ring is available separately.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624930619604,"sku":"STA-101-8558","price":305.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_debf246c-d197-43c3-8e08-96fed92f2726.jpg?v=1788655106"},{"product_id":"max-e-pro-seal-plate","title":"Sta-Rite Max-E-Pro Seal Plate","description":"\u003cp\u003eThe Sta-Rite C103-194PZ is the genuine seal plate for the Max-E-Pro 5P6R pool pump. It is the same plate Pentair lists for the 50Hz MG II, DG II and IntelliPro pumps, and it was previously sold under the number C103-194P.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the seal plate does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal plate closes the back of the pump volute against the motor and carries the shaft seal. If yours has cracked, warped from a dry run, or has a worn seal seat that will not hold a new seal, this is the part to replace. A damaged plate will keep weeping no matter how many seals you install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the plate only. Because the pump has to be split at the motor to change it, most techs fit a new shaft seal and pump lid o-ring in the same job so the pump is not opened twice.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624996679892,"sku":"STA-101-1265","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e9c8c091-c843-4350-9ac6-f3dfd26bc81e.png?v=1788661619"},{"product_id":"seal-plate-kit-max-e-pro","title":"Sta-Rite Seal Plate Kit for Max-E-Pro, Max-E-Glas II and Dura-Glas II C203-194P","description":"\u003cp\u003eThe Sta-Rite C203-194P is the seal plate kit for Max-E-Pro, Max-E-Glas II and Dura-Glas II pumps. It is the new style plate without the copper insert, and it ships with a shaft seal and the seal plate o-ring so the pump goes back together with fresh sealing surfaces on both sides of the plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew style, no copper insert\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEarlier Sta-Rite seal plates carried a copper insert. This kit is the current design without it, and it is the replacement Sta-Rite specifies for those older plates as well as for pumps that already have the new style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite Max-E-Pro, Max-E-Glas II and Dura-Glas II. The same kit is also listed on the Pentair Pinnacle and IntelliPro VS 3050 parts diagrams. If the pump has been leaking at the seal or the plate itself is cracked or worn where the seal seats, this kit covers the whole repair in one part number.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625021616340,"sku":"STA-101-1464","price":176.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_724f1ae9-e245-4878-bda4-b4392fa95922.gif?v=1788662480"},{"product_id":"black-supermax-volute-housing","title":"Sta-Rite Black SuperMax Volute Housing 351089Z","description":"\u003cp\u003eThe Sta-Rite 351089Z is the black volute housing for SuperMax High Pressure and SuperMax VS variable speed pumps. The volute is the body the impeller spins inside, so a cracked or stripped one takes the whole pump out of service. This is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite SuperMax High Pressure and SuperMax VS. The same housing appears on the Pentair SuperFlo VS parts diagram, which shares the platform. It is the black version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the job once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith the wet end apart, fit a new 5\/8 in. mechanical shaft seal (PAC-101-4545). If the clamp, ramp and cam (STA-101-5180) are worn or the unions are cracked, the SuperFlo and SuperMax union kit (PAC-101-0157) finishes the job.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625021780180,"sku":"STA-101-1368","price":262.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5abc3bcd-f6ec-4398-9bb1-d8300b424022.png?v=1788662490"},{"product_id":"o-ring-diffuser","title":"Pentair Genuine OEM High Flow Diffuser O-Ring","description":"\u003cp\u003eThe Pentair 355030 is the high flow diffuser o-ring, a square profile ring measuring 3-1\/8 in. outside diameter by 2-3\/4 in. inside diameter. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSquare, not round\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe groove in these pumps is cut for a square cross section. A round o-ring of similar diameter will sit proud, roll under load, and never seal properly, so it is worth ordering the correct part rather than substituting from a drawer of assorted rings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair Pinnacle High Flow in-ground pumps, SuperFlo, Challenger High Flow and the Sta-Rite SuperMax.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser sits over the impeller and turns velocity into pressure. This ring seals it to the housing so all the flow is forced through the impeller eye. When it hardens and flattens, water bypasses the impeller, and the pump loses head while the motor sounds exactly as it always has.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove, fit the new ring dry into a clean seat, and give it a thin film of silicone o-ring lubricant so it stays put as the pump goes back together.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625722491092,"sku":"PAC-101-3107","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e560ccec-0868-429d-ab16-13b9e377ee29.png?v=1788690028"},{"product_id":"whisperflo-xf-5hp-impeller","title":"Pentair WhisperFlo XF 5 HP Impeller","description":"\u003cp\u003eThe Pentair 400023Z is the 5 HP impeller assembly for WhisperFloXF and Max-E-ProXF pumps. It fits the XFET-20, XFE-20, XFJ-20 and XFK-20 models in both families.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the impeller does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is the rotating disc inside the pump that takes energy from the motor and puts it into the water. Everything downstream, the flow to the filter, the pressure at the returns, the suction that runs a cleaner, comes from this one part turning cleanly inside the volute.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the horsepower\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers are sized to the motor. This one is the 5 HP part. Fitting a different size changes the flow curve the pump was designed around, so match the horsepower to what is on your motor plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSigns it needs replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeak return flow when the filter is clean and the pump is fully primed is the classic symptom. Open the wet end and you typically find vanes packed with debris, worn thin, or broken away. Because the pump has to come apart to reach the impeller, it is worth having the shaft seal and the seal plate o-ring on hand for the same job.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625747820756,"sku":"PUR-101-4000","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9827669c-9480-4149-8177-d546b0d03191.jpg?v=1788691457"},{"product_id":"tank-body-v-clamp","title":"Sta-Rite Tank Body V Clamp","description":"\u003cp\u003eThis is the C19-37AZ, the V clamp that holds the tank body of the pump together. It is listed for the Max-E-Glas II and Dura-Glas II, the Max-E-Pro series, IntelliPro, and the original Max-E-Glas and Dura-Glas pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe clamp is part of the seal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt looks like a plain band, but the clamp is what applies even pressure around the housing gasket. Years of chlorine, sun and the odd overtightened knob leave clamps stretched, distorted or corroded, and once that happens the pump weeps at the seam whatever gasket you put in. If you have replaced a housing gasket and the leak came back, the clamp is the next thing to look at.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoing the job once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clamp knob is a separate part number and usually ages alongside the clamp, so check both. If the pump is coming apart for a shaft seal or a gasket anyway, changing a tired clamp at the same time adds a couple of minutes rather than a second service call.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625749262548,"sku":"STA-101-5155","price":121.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_000ab224-2f6a-45d6-b5eb-2e077c26679c.gif?v=1788691669"},{"product_id":"diffuser-75hp-2-5hp-full-rated","title":"Sta-Rite Max-E-Glas\/Dura-Glas Diffuser .75HP \/ 2.5HP Full Rated","description":"\u003cp\u003eThe Sta-Rite C1-200PAZ is the replacement diffuser for Max-E-Glas and Dura-Glas inground pool and spa pumps. It is a durable molded plastic part, and the front of the diffuser itself carries C1-200PA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe horsepower range is stated two ways in the source material. The listing title reads .75HP to 2.5HP full rated, and the manufacturer note reads 1 through 2-1\/2 HP full rated, with the body text describing 3\/4 HP through 2-1\/2 HP full-rate and up-rate pumps. Rather than guess, match the physical part: 6-1\/2 inch diameter, 9\/16 inch thickness at the outside edge of the vane, 1-7\/8 inch from the back of the vanes to the front of the intake, a 1-7\/8 inch inlet ID and a 2-1\/4 inch inlet OD.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat to look at\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt has five vanes, each about 2-5\/8 inches long, and five screw holes. A brass sleeve is permanently attached inside the inlet, which is a useful way to tell this diffuser apart from similar looking parts. Since the pump has to come apart to reach it, check the impeller and the strainer basket while you are in there.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625749786836,"sku":"STA-101-3716","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0adff19-5261-468b-9ead-1f178f6b964c.png?v=1788691741"},{"product_id":"seal-plate-1","title":"Pentair SuperFlo Seal Plate","description":"\u003cp\u003eThe Pentair 356012Z is the seal plate for Pinnacle high flow in-ground pumps and SuperFlo pool pumps, finished in almond. It is the genuine Pentair part, and it is also listed for the Sta-Rite SuperMax pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the seal plate does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal plate is the disc between the motor and the wet end of the pump. The motor bolts to one side, the impeller sits on the other, and the shaft seal rides in the middle. If the plate cracks, warps or corrodes at the seal bore, water finds its way back along the shaft toward the motor, so a failed plate is worth replacing rather than patching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn SuperFlo VS pumps this plate is for units manufactured before 6\/17\/19, so read the build date on the motor label first. While the pump is open, the seal bracket o-ring and the shaft seal are separate parts that are normally replaced at the same time.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625773576404,"sku":"PAC-101-6012","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0f63381-03f7-426b-958d-3fcc29597f36.gif?v=1788692095"},{"product_id":"impeller-75hp-full-rate-1hp-up-rate","title":"Sta-Rite Max-E-Pro Impeller .75HP Full Rate \/ 1HP Up Rate","description":"\u003cp\u003eThe C105-238P is the impeller assembly for the Sta-Rite Max-E-Glas II, Dura-Glas II and Max-E-Pro series inground pumps, rated 3\/4 horsepower full rate and 1 horsepower up rate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the rating\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers are cut for a specific horsepower. The same pump housing takes several different impellers, and fitting the wrong one changes the flow the pump produces. Read the full rate or up rate designation off the pump label rather than going by the horsepower figure alone, since 3\/4 HP full rate and 1 HP up rate are the same impeller here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeak flow with a clean filter, an empty pump basket and no air in the lid usually means the impeller. Either the vanes have worn away their edges over years of service, or the narrow passages between them have packed with hair, pebbles or leaf fragments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReaching the impeller means pulling the motor assembly out of the housing, which puts the shaft seal right in front of you. It is the standard companion part on this job.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625784389844,"sku":"STA-101-8551","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f09d5ce7-aff9-4589-9174-eaeee135d727.gif?v=1788692232"},{"product_id":"impeller-2hp-full-rate-2-5hp-up-rate","title":"Sta-Rite Max-E-Pro Impeller 2HP Full Rate\/2.5HP Up Rate","description":"\u003cp\u003eThe C105-238PEBAZ is the impeller assembly for Sta-Rite Max-E-Pro, Max-E-Glas II and Dura-Glas II inground pumps, rated 2 horsepower full rate and 2-1\/2 horsepower up rate. It is the genuine part, listed under both the Sta-Rite and Pentair names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the right impeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite builds a different impeller for every horsepower step in these pump families, and they are not interchangeable. The motor label is what decides it. This one covers two ratings at once: a 2 horsepower full rate motor and a 2-1\/2 horsepower up rate motor use the same impeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a worn impeller looks like\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlow falls off, the filter pressure reads low, and a heater or chlorinator that depends on flow starts throwing faults. Often nothing sounds wrong. Debris lodged in the vanes, or vane edges worn thin over years of service, quietly costs the pump a large share of its output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the wet end is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGetting to the impeller means going through the seal plate, so the shaft seal is the standard companion replacement. Inspect the impeller o-ring and the diffuser at the same time rather than opening the pump twice.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625785077972,"sku":"STA-101-9692","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d1fe0339-ccc2-4725-adad-1057c9dc7b45.gif?v=1788692321"},{"product_id":"whisperflo-xf-5hp-diffuser","title":"Pentair WhisperFlo XF 5 HP Diffuser","description":"\u003cp\u003eThe Pentair 400011Z is the diffuser for the 5 HP WhisperFlo XF and Max-E-Pro XF inground pool pumps. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the diffuser does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser sits over the impeller in the wet end and converts the spinning flow leaving the impeller into steady pressure heading out of the pump. It is also what lets the pump hold prime. When it cracks, warps or wears at its sealing face, the pump becomes noisy, loses pressure and struggles to prime, and the impeller usually takes the blame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eXF diffusers are matched to horsepower. This is the 5 HP part, so check the rating on your motor plate before ordering. Since the wet end is already open when the diffuser is changed, it is a sensible time to look at the impeller and the seal as well.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625810571476,"sku":"PUR-101-0123","price":118.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_18d280d5-f88f-4f4d-bc95-42e24efbbf9b.jpg?v=1788700384"},{"product_id":"seal-plate-kit","title":"Sta-Rite Seal Plate Kit for Max-E-Glas, Dura-Glas","description":"\u003cp\u003eThe C203-193P is the Sta-Rite seal plate kit for the Max-E-Glas and Dura-Glas pool pumps. It is sold as three pieces together: the seal plate, the shaft seal and the seal plate o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater on the pad under the middle of the pump usually means the shaft seal has gone. Once it has been leaking for a while, the seal plate face is often scored or pitted where the seal rides, and a new seal alone will weep again. Fitting the plate, the seal and the o-ring in one go removes that guesswork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the fitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit is listed for the Max-E-Glas and Dura-Glas pumps, and it is also published as fitting the Max-E-Glas II, Dura-Glas II and Max-E-Pro. Both lists are in circulation. Compare the kit against the seal plate on your own pump, or against the parts diagram for it, before you order.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625852580052,"sku":"STA-101-2492","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3b863bbe-78df-43af-8a0b-316056e21a07.gif?v=1788701683"},{"product_id":"square-ring-seal-plate-max-e-pro-intellipro","title":"Pentair Square Ring, Seal Plate, Max-E-Pro \/ IntelliPro","description":"\u003cp\u003eThe Pentair 357099Z is the square ring that seals at the seal plate on Max-E-Pro and IntelliPro pumps. Pentair also lists it under replacement part number U9-228A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a square ring does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA square section ring seats flat in its groove and holds its position under clamping load. That gives a wide, even contact face at the seal plate joint. Over seasons the rubber hardens and takes a set, and the joint starts to weep. A fresh ring restores the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal plate has to be separated from the volute to reach the shaft seal, so a pump that is already apart for a seal change is the natural moment to renew this ring rather than reuse a compressed one.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626099028180,"sku":"STA-101-3782","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9441b205-c801-4863-9a2b-f603d6a79e9f.jpg?v=1788704690"},{"product_id":"diffuser-1-1-2hp-3hp","title":"Sta-Rite Diffuser for 1-1\/2 HP to 3 HP Pumps","description":"\u003cp\u003eThe Sta-Rite C1-271P is the pump diffuser covering 1-1\/2 HP through 3 HP. One part number spans that whole range, which is worth knowing because the impeller behind it is horsepower specific and the diffuser is not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the diffuser does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller throws water outward at speed. The diffuser is the shaped housing that catches it and turns that speed into the pressure the filter and returns actually see. When it cracks, warps from heat, or loses the fit around the impeller hub, water recirculates inside the pump instead of leaving it. The symptom is a pump that sounds normal and moves noticeably less water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePump coverage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eC1-271P is carried in the parts groups for the Sta-Rite Max-E-Pro, the Sta-Rite IntelliPro VS 3050 and the Pentair Pinnacle, and it also appears in the Max-E-Glas II and Dura-Glas II listings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the pump is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring that seals the diffuser and the diffuser screws are separate part numbers. Both are cheap, both are already exposed once the pump is apart, and neither is worth a second teardown.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48626120065236,"sku":"STA-101-8556","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_08c6bbdd-6c1c-4f4e-9bd7-3dc281c79bdb.gif?v=1788705101"},{"product_id":"drain-plug-with-o-ring","title":"Sta-Rite Drain Plug with O-Ring, 1\/4 in. NPT","description":"\u003cp\u003eThe Sta-Rite U178-920P is a 1\/4 inch drain plug supplied with its o-ring, used across a wide range of Sta-Rite pumps, valves and heater water systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe o-ring is the part that matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plug body is simple, but the o-ring is what actually seals against the housing. It gets compressed and released every time the plug comes out, which on most pools is at least twice a year for winterizing and opening. After enough cycles the ring takes a permanent set or cracks, and the plug that used to seal by hand suddenly weeps no matter how hard it is tightened. Buying the plug with the o-ring removes the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBroad fitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis plug is shown on parts diagrams for Sta-Rite ABG, JWPA, Max-E-Glas, Dura-Glas, Max-E-Glas II, Dura-Glas II, Dyna-Glas, Dyna-Max, Dura-Jet JS Series and Max-E-Pro Series pumps. It also appears on the Sta-Rite 1-1\/2 inch and 2 inch side mount multiport valve, MasterTemp heater water system and Pentair Dyna-Wave pump diagrams. Check yours against the relevant breakdown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth keeping spare\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDrain plugs are the parts that go missing between seasons or strip in the hand on a cold morning. Keeping one on the shelf costs almost nothing against a pump that cannot be drained before a freeze.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48626211455188,"sku":"STA-101-3730","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0f5cc071-d383-49e8-92f8-6c0e8608244b.png?v=1788706181"},{"product_id":"trap-basket-assembly","title":"Sta-Rite Trap Basket Assembly for Dura-Glas and Max-E-Glas Pumps","description":"\u003cp\u003eThe Sta-Rite PKG 115 is the complete 5 inch strainer trap assembly for Dura-Glas and Max-E-Glas inground pool and spa pumps. It arrives as a finished unit: the trap body, the lid, the basket, the drain plug and every o-ring, gasket and piece of hardware that goes with them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the whole trap\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe trap lives under constant suction and takes the brunt of freeze damage, over-tightened lids and years of sun. Once the body itself is cracked or the sealing face is chewed up, sealants and clamps only buy a few weeks. Replacing the assembly gives you fresh sealing surfaces and fresh seals at the same time, which is usually what a stubborn prime problem needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the size first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 5 inch trap. Measure the pot on your pump before ordering so you are matching the right body, and confirm you have a Dura-Glas or Max-E-Glas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it protects\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket in this trap is the last filter before water reaches the impeller. Keeping it intact and seated properly is what stops leaves and grit from wearing out the wet end.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48626305597652,"sku":"STA-10-336","price":163.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6ba17090-cf74-485c-9c32-9275c4cf741e.gif?v=1788707955"},{"product_id":"impeller-1hp-full-rated-1-5hp-up-rated-high-flow","title":"Pentair Super Flo\/Max Impeller, 1 HP Full Rated \/ 1.5 HP Up Rated, High Flow","description":"\u003cp\u003eThe Pentair 355074Z is the genuine high flow impeller rated 1 HP full rated and 1.5 HP up rated. It covers a wide spread of Pentair and Sta-Rite pumps, which is why the same part number turns up in several parts diagrams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists it for Challenger and Pinnacle High Flow pool and spa 1 hp full rated and 1-1\/2 hp inground pumps, and for SuperFlo and Sta-Rite SuperMax pool and spa 1-1\/2 hp pumps. On SuperFlo VS pumps it applies to units manufactured before 6\/17\/19, so read the date on the motor label rather than assuming.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the flow rating\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the high flow impeller. Pentair builds standard and high flow versions of the same nominal horsepower, and they are not interchangeable if you want the pump to perform the way the label says. Compare the part number on the impeller you are pulling out before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a worn impeller looks like\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVane edges rounded off, hairline cracks at the hub, or debris packed solid between the vanes. Any of those cut flow without making an obvious noise, so the usual complaint is a slow cleaner, weak returns and a filter gauge sitting lower than normal.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626305761492,"sku":"PAC-101-3110","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f59eacd4-8b70-40fb-8179-c77af1a173c1.png?v=1788707960"},{"product_id":"lid-superflo-pump","title":"Pentair Strainer Cover for SuperFlo Pool Pump","description":"\u003cp\u003eThe Pentair 350091Z is the clear strainer cover for the SuperFlo pump, the lid that sits over the strainer pot at the front of the pump. Pentair also lists it as 350091. It is the genuine factory part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy lids get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pump lid takes sun, heat and chlorinated water for years. It clouds first, so you can no longer see the basket, then it crazes, and eventually it distorts or cracks and stops sealing. Once the seal is gone, the pump draws air on the suction side and loses prime, which is usually the point at which the lid gets blamed correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover only. The lid o-ring and the clamp are separate parts, and a new o-ring with a smear of silicone lubricant is worth fitting at the same time so the new lid seals properly from the first start.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists this cover under SuperFlo and SuperFlo VS pump parts, and it also appears in the Sta-Rite SuperMax pump replacement parts. Compare the lid you have against the pictures before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626363236564,"sku":"PAC-101-0091","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_707314ad-f3f8-4e3a-925d-60c748424ff9.jpg?v=1788709300"},{"product_id":"water-slinger","title":"Sta-Rite Water Slinger For Dyna-Jet\/Glas\/Max\/Pro","description":"\u003cp\u003eThe Sta-Rite 17351-0009 is the new style water slinger, the small rubber ring that rides on the motor shaft between the seal plate and the motor face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it protects against\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo shaft seal stays perfect forever. When one starts to weep, the slinger spins with the shaft and throws that water outward instead of letting it run along the shaft into the motor. Without it, seal leakage reaches the drive end bearing, and a cheap seal replacement turns into a motor replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is used across a lot of the Sta-Rite range: Dyna-Jet, Dyna-Glas, Dyna-Max, Dyna-Pro and Dyna-Pro E, Max-E-Glas and Max-E-Glas II, Max-E-Pro, Dura-Glas and Dura-Glas II, JWPA and the PLBC booster pump. It also shows up in the Pentair Pinnacle and IntelliPro VS 3050 parts breakdowns.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChange it whenever the motor is off the pump, particularly during a shaft seal replacement. The shaft is already bare, the part costs almost nothing, and an old slinger that has gone hard or split is doing no work at all.\u003c\/p\u003e","brand":"17351-0009","offers":[{"title":"Default Title","offer_id":48626476777684,"sku":"STA-101-3727","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_368139b3-65e3-44ec-8fce-39aea78ef99e.png?v=1788710672"},{"product_id":"trap-cover-o-ring-max-e-pro-6-3-4-id-1-4-thickness","title":"Sta-Rite Trap Cover O-Ring, Max-E-Pro, 6-3\/4\" ID, 1\/4\" Thickness","description":"\u003cp\u003eThis is the trap cover o-ring, part number 35505-1440Z, used on the Max-E-Pro Series, Dyna-Pro and Dyna-Pro E pumps as well as the IntelliPro VS 3050, IntelliFloXF Variable Speed and WhisperFloXF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe seal that holds prime\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe strainer pot runs under suction, so any gap at the lid pulls air rather than leaking water. That is why a worn trap cover o-ring shows up as a pump that will not stay primed, or a basket that fills with air while the pump is running, instead of as a puddle on the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes on record\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur sources give this seal two size readings: 6-3\/4 inch inside diameter with a 1\/4 inch cross section, and 6.35 inch by 6.9 inch. Both are recorded here rather than one being chosen. If exact dimensions matter for your application, measure the seal in your hand before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eService note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid comes off every time the basket is emptied, so this seal sees more handling than almost any other part on the pump. Keep it lubricated with a pool grade o-ring lubricant and replace it as soon as it stops springing back.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48626499158228,"sku":"STA-101-1440","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_495c38a5-d2c5-4150-bec6-a7df35d9cb5a.gif?v=1788710984"},{"product_id":"pentair-supermax-drive-cover-with-control-panel-353124","title":"Pentair SuperMax Drive Cover with Control Panel 353124","description":"\u003cp\u003eThe Pentair 353124 is the HMI drive cover with control panel for Sta-Rite SuperMax VS variable speed pumps, finished in black. It is the genuine Pentair assembly and comes with the panel fitted rather than as a bare cover.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the HMI does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a variable speed pump the human machine interface is where everything is set: speeds, run times, schedules. Lose the panel and the pump may still run, but there is no way to change what it is doing from the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA blank or unresponsive display, cracked buttons, or water intrusion at the cover all point to this assembly. Because the cover and panel come together, one part gets the pump back under local control. Sta-Rite is a Pentair brand, which is why a SuperMax part carries a Pentair number.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626599264468,"sku":"STA-101-6591","price":303.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_75470688-3a44-4e78-b657-7cf1170da45d.png?v=1788712916"},{"product_id":"trap-basket-max-e-pro","title":"Sta-Rite Max-E-Pro Trap Basket","description":"\u003cp\u003eThe Sta-Rite C8-58P is the trap basket for the Max-E-Pro pump. It is the genuine Sta-Rite part, and it also turns up under the Sta-Rite Dyna-Pro and Dyna-Pro E and the Pentair Pinnacle pump parts listings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe trap basket sits in the strainer pot ahead of the impeller and catches leaves, bugs and larger debris before they can reach the vanes. Everything the basket stops is something that does not end up jammed in the impeller or the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBaskets go brittle with age and chemicals, and the handle or the rim usually goes first. Once there is a crack or a broken section, debris passes straight through, so it is worth replacing rather than working around. Compare the old basket with the part number before ordering, since Sta-Rite uses several sizes across its pump lines.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48626872090836,"sku":"STA-101-8559","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e25fb589-f7c9-4572-8d3a-2f6436c3d7e4.png?v=1788716077"},{"product_id":"chemical-salt-ozone-resistant-seal-set","title":"Pentair SuperFlo and SuperMax Seal Kit, Chemical, Salt and Ozone Resistant","description":"\u003cp\u003eThe Pentair 356197 is the seal set for SuperFlo and SuperMax pumps, supplied in the chemical, salt and ozone resistant material. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the material matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pump seal spends its whole life in moving water. On a salt pool, or a system running ozone, that water is harder on rubber and plastic than plain chlorinated water is. Pentair offers this set specifically for those conditions, so the seal lasts closer to its intended life rather than hardening early.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe first sign of a failed shaft seal is water at the joint between the motor and the pump body, either dripping while the pump runs or leaving rust and mineral marks on the motor face. Left alone, that water reaches the motor bearings and turns a seal job into a motor job.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626974884052,"sku":"PAC-101-6197","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_91ae1281-2beb-4249-9926-6e8a0d71a2f6.jpg?v=1788718640"},{"product_id":"impeller-1-5hp-full-rated-2hp-up-rated-high-flow","title":"Pentair SuperFlo and SuperMax Impeller, 1.5 HP Full Rated \/ 2 HP Up Rated, High Flow","description":"\u003cp\u003eThe Pentair 355086Z is the high flow impeller used across several Pentair and Sta-Rite pump families. It is the genuine factory part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists it for Challenger and Pinnacle High Flow pool and spa inground pumps, model CFII-NI-2A, and for SuperFlo and Sta-Rite SuperMax pool and spa pumps at 1-1\/2 hp full rated or 2 hp up rated. One impeller carries two horsepower numbers because full rated and up rated pumps share hydraulics and differ in how they are labeled.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the label\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source data for this part is not consistent on the full rate figure: the product name and the fitment list say 1-1\/2 hp full rated, while older page copy says 1 hp full rated. Both agree on 2 hp up rated. Read the horsepower and the rating wording printed on your pump before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a worn impeller looks like\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeak returns, a filter pressure gauge sitting lower than it used to, and a pump that primes but never quite makes flow. Vanes wear thin or break, and debris packs the passages. While the pump is open, the mechanical seal behind the impeller and the diffuser o-ring are the parts worth replacing at the same time.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626975277268,"sku":"PAC-101-3113","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1a80ab1e-d3b8-4112-a882-5483a8b00c7c.png?v=1788718649"},{"product_id":"o-ring-2-357","title":"Pentair O-Ring, 2-357","description":"\u003cp\u003eThe Pentair 357255 is the genuine lid o-ring, size 2-357, for SuperFlo pool pumps. Pentair also lists it with OptiFlo and Sta-Rite SuperMax pump parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe o-ring that causes prime problems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid o-ring seals the strainer pot against atmosphere while the pump pulls a vacuum on it. Once the ring hardens, flattens or picks up a nick, air gets in past it, and the pump either refuses to prime or runs with a pocket of air trapped under the clear lid. It looks like a suction line problem and it usually is not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and care\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove and the lid seat before the new ring goes on, and use a silicone lubricant intended for pool equipment. Petroleum grease will swell and break down the rubber. Do not overtighten the lid to make a worn o-ring seal, since that distorts the ring and the lid without solving anything.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48626992709844,"sku":"PAC-101-7255","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5e6807ee-ac9a-4320-b96b-07225bc676f7.jpg?v=1788718834"},{"product_id":"impeller-1hp-fr-1-5hp-ur","title":"Sta-Rite Impeller 1HP FR\/1.5HP UR for Dura-Glas\/Max-E Glas","description":"\u003cp\u003eThe C105-137PEBZ is the genuine impeller assembly for Sta-Rite Max-E-Glas and Dura-Glas inground pool and spa pumps, in the 1 HP full rated and 1-1\/2 HP up rated size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the size right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers are matched to horsepower, not just to the pump family. This one is specified for Max-E-Glas models PE6E-182L, PE52E-182L, PEA5F-182L and PEA6F-182L, and for Dura-Glas models P2R5YE-133L, P2R5E-182L, P2R5YE-125L, P2RA5F-182L, P2RAXF-182LS and P2RA6F-125L. Read the model and horsepower off the motor label before ordering, because a mismatched impeller either will not fit the diffuser or will load the motor incorrectly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a worn impeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pump with a failing impeller still primes and still sounds normal, but the returns go weak and the filter gauge reads low. Vanes wear thin, small stones crack them, and hair and grit pack the passages solid. Replacing the impeller restores the flow the pump was designed to deliver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAppearance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe molded color can vary between production runs. That is normal and does not affect fit.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48627236700372,"sku":"STA-101-3705","price":110.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b91b090f-0704-45ee-bede-57cf44466444.png?v=1788720227"},{"product_id":"diffuser-1-1-2-hp-thru-2hp","title":"Pentair SuperFlo and SuperMax Diffuser, 1-1\/2 HP Thru 2 HP","description":"\u003cp\u003eThe Pentair 355618Z is the diffuser for SuperFlo and SuperMax pool and spa inground pumps and for the Pinnacle high flow inground pump, in the 1.5 HP and 2 HP sizes. It also fits Pentair SuperFlo VS pumps manufactured before 6\/17\/19.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a diffuser matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser caps the impeller and shapes the water on its way through the pump. It has to seal cleanly against the impeller face for the pump to build pressure. When the diffuser cracks, warps from a dry run, or wears at the sealing face, water simply circulates inside the volute instead of heading out to the filter. The pump sounds normal and the numbers on the filter gauge say otherwise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the date on a variable speed pump\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 1.5 HP and 2 HP fitment is straightforward on the standard pumps. On a SuperFlo VS, the cutoff matters: this part covers units built before 6\/17\/19, so read the manufacture date on the pump label before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the pump is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser o-ring and the hex head screw that retains the diffuser are separate parts. Both are cheap, both are already exposed once the housing is off, and neither is worth a second teardown.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627339788500,"sku":"PAC-101-7004","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6572a9b0-e576-4b3c-bdaa-4445f434ba96.jpg?v=1788722666"},{"product_id":"impeller-1-5hp-full-rate-2hp-up-rate","title":"Sta-Rite Impeller 1.5 HP Full Rate, 2 HP Up Rate","description":"\u003cp\u003eSta-Rite C105-238PDBA is the impeller sized for the 1-1\/2 horsepower full rated and 2 horsepower up rated pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the impeller number matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn these pumps the impeller, working with its diffuser, is what sets the horsepower rating. Two pumps that look identical on the pad can carry different impellers. Fit the wrong one and the pump runs, but the flow it produces is not the flow the system was designed around. Check the number on the impeller you take out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a worn impeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeak returns, slow skimming and a filter that never seems to build pressure usually trace back to the impeller: either vanes worn thin with age or a vane passage packed with debris. It is listed against the Max-E-Pro, Max-E-Glas II and Dura-Glas II parts breakdowns.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48627345260756,"sku":"STA-101-9691","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_29b09f8e-509f-45b8-886f-47fc20b09bec.gif?v=1788722705"},{"product_id":"impeller-1hp-full-rate-1-5hp-up-rate","title":"Sta-Rite Max-E-Pro Impeller, 1 HP Full Rate \/ 1.5 HP Up Rate","description":"\u003cp\u003eC105-238PBZ is the impeller assembly for Sta-Rite Max-E-Pro, Max-E-Glas II and Dura-Glas II inground pumps, rated 1 horsepower full rate and 1-1\/2 horsepower up rate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the rating\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers are not interchangeable across horsepower. The vane profile is what sets how much water the pump moves against a given head, so a pump fitted with the wrong impeller either starves the system or loads the motor. Read the horsepower and the full rate or up rate designation off the motor label and match it to this part before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a tired impeller looks like\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlow falls off and filter pressure drops even though the strainer basket is clean and the suction side holds prime. Pull the impeller and you usually find either worn vane edges or fine debris packed solid into the passages.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the seal at the same time\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReaching the impeller means the seal plate comes apart. That is the moment to fit a new shaft seal, since the labor is already spent and a seal that gets disturbed rarely goes back dry.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48627566182612,"sku":"STA-101-8552","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_be0a0818-24fa-4ba3-b9df-7c944a193776.gif?v=1788723702"},{"product_id":"1-5-black-union-kit","title":"Pentair 1.5\" Black Union Kit for SuperMax and SuperFlo","description":"\u003cp\u003eThe Pentair 351157 is the black 1.5 inch union kit for the SuperMax and SuperFlo high performance pumps. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is not a single fitting. It carries the adapters that glue into the plumbing, the union nuts that thread onto the pump, and the O-rings that seal the joint, so one order covers a complete rebuild of the connections at both ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater at the pump is usually water at the unions. The O-ring takes a set over the years, or a nut gets cranked down hard enough to crack, and the joint starts to weep. Rather than chase one part at a time, replacing the whole union assembly puts the pump connections back to new.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627655180500,"sku":"AMP-101-1102","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/pentair-351157-15-black-union-kit.jpg?v=1788725847"},{"product_id":"impeller-2hp-full-rated-2-1-2hp-up-rated-high-flow","title":"Pentair Impeller, 2 HP Full Rated \/ 2-1\/2 HP Up Rated, High Flow","description":"\u003cp\u003eThe Pentair 355093Z is the high flow impeller for 2 HP full rated and 2-1\/2 HP up rated pumps in the SuperFlo, SuperMax and Challenger High Flow families. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFull rated or up rated\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThose two labels describe the motor rating, not the wet end. A 2 HP full rated pump and a 2-1\/2 HP up rated pump move the same water and share this impeller. What does matter is high flow versus standard: this is the high flow part, so confirm your pump model rather than working from horsepower alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a worn impeller looks like\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpeller wear is gradual, so few owners notice the flow going. It usually turns up somewhere else: a pressure side cleaner that has gone slow, a heater cycling on flow, a longer time to prime, or a filter pressure reading that has quietly dropped. Vanes that are eroded, chipped or packed with debris all produce the same result.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the pump is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mechanical seal sits directly behind the impeller and comes out in the same teardown, so replace it at the same time. The impeller locking screw and the matching high flow diffuser are available separately if either is damaged.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627710755028,"sku":"PAC-101-3114","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8e7166c7-9ed4-40b5-846b-a6317bfd63d4.png?v=1788727009"},{"product_id":"impeller-screw","title":"Sta-Rite Impeller Screw for Dyna-Pro","description":"\u003cp\u003eThe Sta-Rite 37337-6080 is the impeller screw for Dyna-Pro and Dyna-Pro E pumps. It also appears in the Pentair Pinnacle pump parts listing. It is the small fastener that holds the impeller onto the motor shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost people meet this screw during a seal or impeller job. It comes out to free the impeller, and it often comes out corroded, chewed up by a driver that slipped, or not at all. Once the head is rounded or the threads are damaged, reusing it is a gamble on a part that has to hold the impeller in place every time the pump runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the screw on its own. The impeller o-ring is sold separately, so order both together if you are already taking the pump apart.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48627735724244,"sku":"STA-101-3147","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4d6c4096-acc1-433d-9af2-29a617cb0cf3.png?v=1788727508"},{"product_id":"chemical-salt-ozone-resistant-seal-set-1","title":"Pentair Max-E-Pro Chemical, Salt, Ozone Resistant Seal Set","description":"\u003cp\u003eThe Pentair 356196 is the chemical, salt and ozone resistant seal set for Max-E-Pro and IntelliPro pumps. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the resistant version\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEverything the pump moves passes over its seals. On a salt pool, or on any system running ozone, standard seal material hardens and cracks well before the rest of the pump is worn out, and the first sign is usually a drip at the motor end or a pump that will not hold prime. This set is specified for those conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSeals go in as part of a wet end service, so plan on having the pump apart. Replace the whole set at once rather than a single piece, since the remaining original seals are the same age as the one that failed.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627835797716,"sku":"STA-101-6196","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b63eb2dc-1369-41e8-9f54-8e1139dc06c6.jpg?v=1788728024"},{"product_id":"max-e-glas-ii-dura-glas-ii","title":"SuperPro Pump Rebuild Kit for Sta-Rite MAX-E-GLAS II and DURA-GLAS II","description":"\u003cp\u003eThe SuperPro GO-KIT38-9 is a gasket and o-ring kit with the shaft seal included, built for Sta-Rite P4E and P4EA series MAX-E-GLAS II and DURA-GLAS II pumps. SuperPro lists it as Gasket and O-Ring Kit 38, and it crosses to U.S. Seal part PSK-ST3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSix pieces: the O-113 seal plate o-ring, the O-240 seal plate housing o-ring, the AS-1521 shaft seal, the O-83 diffuser o-ring, the O-12 lid o-ring and the O-39 drain plug o-ring. That is every soft part the pump needs to come back together, including the mechanical seal that is usually ordered on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a kit rather than one part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePool pump o-rings harden with heat and chlorine, and the set ages together. Pulling a pump apart to change one leaking o-ring and reusing the rest often means going back in a few months later for the next one. Doing them all while the pump is open costs one teardown instead of several.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the pump first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm you have a Sta-Rite P4E or P4EA series MAX-E-GLAS II or DURA-GLAS II. Sta-Rite used similar names across different pump bodies, and the o-ring sizes are not shared between them.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48627845923028,"sku":"SPG-601-5038","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fd04052f-bb49-4590-b499-b280bdc1489b.jpg?v=1788728195"},{"product_id":"impeller-1-75hp-up-rate","title":"Sta-Rite Impeller 1.75 HP Up Rate","description":"\u003cp\u003eThe Sta-Rite C105-238PDCA is a replacement pool pump impeller rated 1.75 HP up rate. It is listed for SuperFlo VST pumps manufactured after 6\/17\/19.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the rating and the date both matter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn impeller is machined for one horsepower rating. Fit the wrong one and it may still slide onto the shaft while moving the wrong volume of water, which either starves the returns or loads the motor. The build date is the other half of the check: this part covers SuperFlo VST pumps built after 6\/17\/19, so confirm the date on your pump before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the wet end is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller screw, the impeller o-ring and the diffuser sit right behind the impeller and are separate parts. They are worth inspecting while everything is already apart, since a fresh impeller behind a tired diffuser will not give back the flow you are chasing.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48627851919572,"sku":"STA-101-1510","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5ac6acff-6989-4160-b094-d93895f76992.jpg?v=1788728311"},{"product_id":"diffuser-1-2hp-1-1-2hp","title":"Sta-Rite Diffuser 1\/2 HP to 1-1\/2 HP for Max-E-Pro Series Pumps","description":"\u003cp\u003eThe Sta-Rite C1-271P1Z is the replacement diffuser for the Max-E-Pro series pump. It is the part that seats over the impeller inside the pump body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller throws water outward; the diffuser collects that flow and directs it into the volute so it leaves the pump as pressure instead of turbulence. A diffuser that has cracked, or whose center opening has worn open around the impeller nose, lets water recirculate inside the housing. The symptom is weak return flow that does not improve after you clean the pump basket and the filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the horsepower\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source information for this part is not consistent on horsepower. The listing title covers 1\/2 HP through 1-1\/2 HP, while the manufacturer description names 3\/4 HP and 1 HP. Compare the diffuser you have taken out against the photographs, and check the horsepower on the motor label, before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the pump is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe diffuser O-ring is a separate part and is the seal between the diffuser and the volute. Since the pump has to come apart either way, it makes sense to fit a new O-ring, and to look over the impeller and shaft seal at the same time.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48627878559956,"sku":"STA-101-2805","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6abe12ce-eee2-4165-a3f3-51aecf5580e9.gif?v=1788729529"},{"product_id":"superflo-pump-base","title":"Pentair Superflo Pump Base","description":"\u003cp\u003eThe Pentair 350094 is the pump base for the Superflo family of pumps. It is the genuine Pentair part, sold on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo styles\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo styles of this base are in circulation. Both are operable with the pump, and we cannot guarantee which version will be sent. Either one does the same job in the same place, so plan on fitting whichever arrives rather than matching the old part by eye.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists 350094 as a replacement part for the Superflo and Superflo VS pumps and for the Sta-Rite SuperMax. It is the piece the pump sits on, so it is the part to order when the original has cracked, split or broken away and the wet end is no longer properly supported.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48627953336532,"sku":"PAC-101-0094","price":98.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_39f3ab88-dbf4-45d4-aa73-6a7b28adf2ea.jpg?v=1788730852"},{"product_id":"union-adapter-each","title":"Pentair SuperFlo and SuperMax Union Adapter","description":"\u003cp\u003eThe Pentair 350093 is the union adapter used on the SuperFlo and SuperMax pool pumps. It is the genuine Pentair part and it is sold individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder two\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair lists this adapter as 2 required. A pump has a union on each side, so a single adapter only rebuilds half the job. If you are opening the pump to replace one, replace both while you are there, since the second one is the same age as the first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePentair carries 350093 in the SuperFlo and SuperFlo VS parts data, and Sta-Rite carries it under the SuperMax pump. Check the number against your own parts list before ordering, because pump unions across brands look alike and are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the union is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnion joints seal on an o-ring. If the seal is flat, cracked or dry when you take the union apart, replace it and lubricate the new one. A tired o-ring on a suction side union is one of the most common causes of a pump that will not hold prime.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628797604052,"sku":"PAC-101-0093","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_40c6cf01-fb65-4b3e-83dd-11fa8be31456.jpg?v=1788750792"},{"product_id":"motor-pad","title":"Sta-Rite Motor Pad for Max-E-Pro Pumps","description":"\u003cp\u003eThe Sta-Rite C35-43 is the motor vibration pad for Max-E-Pro pumps. It is the genuine Sta-Rite replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pad sits between the motor and what it mounts on. Its job is to soak up the vibration a running motor produces instead of letting it pass straight into the base and the pipework around it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth replacing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMotor pads are easy to overlook. They flatten, crack and sometimes disappear entirely during a motor swap, and the pump ends up sitting hard against its mount and sounding rougher than it should. The part costs very little, so it is worth fitting a fresh one any time the motor is off the pump for other work.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48628810973396,"sku":"STA-101-8563","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5dbfedc2-0ae8-4e00-88fb-10879a87a20d.gif?v=1788752221"},{"product_id":"impeller-screw-1-5hp-thru-3hp","title":"Sta-Rite Impeller Screw, 1.5 HP Thru 3 HP","description":"\u003cp\u003eThis is the Sta-Rite C30-12 impeller screw, the fastener that holds the impeller on the motor shaft in Max-E-Glas and Dura-Glas pumps rated 1.5 HP through 3 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrder it with the impeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnyone taking a wet end apart to change an impeller, a shaft seal or a seal plate has to deal with this screw. On a pump that has been in service for years it usually comes out corroded, with a head that is already partly rounded from the first attempt to break it loose. Putting the old one back is how a straightforward job becomes a drilling job the following season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite lists this screw for the Max-E-Glas and Dura-Glas pump families in the 1.5 HP to 3 HP range. Check the model plate on your pump before ordering.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48628856062164,"sku":"STA-101-4111","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8ffc7267-ea1a-4b94-990f-a1b672944548.gif?v=1788755448"},{"product_id":"seal-gasket-kit-for-sta-rite-max-e-pro-series-pool-pumps","title":"Aladdin Seal \u0026 Gasket Kit for Sta-Rite Max-E-Pro Series Pool Pumps","description":"\u003cp\u003eThe Aladdin GO-KIT79 is the seal and gasket kit for Sta-Rite Max-E-Pro series pool pumps. It is the set of parts you want on the bench before the motor comes off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is inside\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit contains one AS201V or PS201 shaft seal, a trap lid o-ring (O-12), a drain plug o-ring (O-39), a diffuser o-ring (O-240) and an impeller screw o-ring (O-627). Each kit also contains one package of PTFE based sealant and lubricant so the gaskets seat properly rather than rolling as the housing goes back together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is everything you need to successfully replace the motor on a Sta-Rite Max-E-Pro pump. Splitting the wet end disturbs every one of these seals, and old o-rings that have taken a set will not seal reliably a second time. Replacing all of them at once costs very little next to the labor of pulling the pump apart again to chase a drip.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48628865827028,"sku":"ALA-APCK1185","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e1c83765-f785-4f7c-90af-d05d9a3cdf0e.png?v=1788756766"},{"product_id":"impeller-1-1-2-hp-fr","title":"Sta-Rite Impeller for 1-1\/2 HP Dyna-Max and Dyna-Pro Pumps","description":"\u003cp\u003eThe C105-236PC is the 1-1\/2 HP impeller for the Sta-Rite Dyna-Glas and Dyna-Max Series pumps and for the Dyna-Pro and Dyna-Pro E. It is the genuine part, not an aftermarket copy.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the impeller does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller is the spinning vane set that actually moves water. Its vanes are cut for a particular horsepower, which is why the 1-1\/2 HP part is a separate number from the 1 HP and 2 HP versions. Fitting the wrong one leaves the pump either starved or loading the motor harder than it should.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms and service\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA tired impeller shows as weak returns and slow suction that a clean filter and an empty basket do not fix. Debris packed into the vanes does the same thing. Because the wet end has to come apart to reach it, the shaft seal assembly and the diffuser are usually replaced or at least inspected during the same job.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48628884635860,"sku":"STA-101-2808","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_03b12ac5-9216-498a-bda3-4a6d1798ef6a.gif?v=1788756937"},{"product_id":"energy-efficient-motor-up-rated-1-hp-115-230v","title":"Century Energy Efficient Motor, Up Rated, 1 HP, 115\/230v","description":"\u003cp\u003eThe Century UQC1102 is a 1 HP up rated pool pump motor, 115\/230V, on a 48Y frame with a square flange. It is the energy efficient version of the standard replacement motor for several Sta-Rite pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for pool duty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor runs at 3450 rpm with a 1.25 service factor and a capacitor start capacitor run design, which gives it the starting torque a pool pump needs and steadier current once it is spinning. Both ends ride on sealed ball bearings, the shaft is 303 stainless steel with a 1\/2 inch thread, and the open drip proof enclosure is rated to a 50 C ambient with automatic thermal protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich pumps it serves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCentury lists this motor for the Sta-Rite Max-E-Glas, Dura-Glas I and II, Max-E-Pro, Dyna-Max and Dyna-Glas. It is a UL 1081 design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRead your existing nameplate and match the horsepower, the rating, the frame and the voltage. Note that the product data describes this motor as square flange while the technical specification sheet lists the mounting as round, so compare the flange on the motor you are replacing and check with us if the two do not agree.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48628891615444,"sku":"AOS-60-5041","price":382.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fe8e53ef-ffe5-4a8a-835c-35d27219a76b.jpg?v=1788757021"},{"product_id":"tank-and-trap-body-dyna-pro","title":"Pentair Sta-Rite Dyna-Pro Tank and Trap Body","description":"\u003cp\u003eThe Pentair C76-71P is the tank and trap body for the Sta-Rite Dyna-Pro pump. It is the main housing, the casting that holds the strainer basket, takes the suction and discharge plumbing and mates to the seal plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen the body is the problem\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA trap body gets replaced when it is cracked, when a freeze has split the pot, or when a threaded port or mounting boss has failed. Those are not repairs that hold once the pump is back at pressure. Warped or scored sealing faces are the other reason, and they show up as a leak or a loss of prime that no amount of new lid o-rings will cure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat carries over\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the housing on its own. The lid and its o-ring, the strainer basket, the seal plate and the impeller are separate parts, so sound components move across to the new body. It is worth replacing the lid o-ring at the same time while the pump is apart.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48628942012628,"sku":"STA-051-0071","price":274.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b5ce77d0-7566-4469-981b-f130a2b20940.png?v=1788758289"},{"product_id":"impeller-75hp-fr-1hp-ur","title":"Sta-Rite Impeller, 3\/4 HP Full Rate and 1 HP Up Rate, for Max-E-Glas and Dura-Glas","description":"\u003cp\u003eThe C105-138PEBZ is the impeller assembly for Sta-Rite Max-E-Glas and Dura-Glas inground pumps, covering the 3\/4 horsepower full rate and 1 horsepower up rate ratings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGet the rating right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers across a pump family look nearly identical and are not interchangeable. The vane geometry is what sets the flow the pump produces at a given motor speed, so an impeller from the wrong rating either chokes the pump or lets the motor work harder than it was matched for. Read the horsepower and the full rate or up rate designation off the pump label rather than guessing from the motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a bad impeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeak returns with a clean filter and a clean basket usually means the impeller. Either the vanes are packed with debris that has worked past the basket, or they are worn open after years of running, and either way the pump moves less water than the system was designed around. Heaters and cleaners feel it first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the pump is apart\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft seal sits directly behind the impeller and can only be reached with the impeller off. Change both in the same teardown. It costs very little more and it means the pump is not coming apart again in a year for the half of the job you skipped.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48628966719700,"sku":"STA-101-3706","price":91.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0a2c9fa-4089-4fd3-ba43-bb714f0c09d4.gif?v=1788758520"},{"product_id":"trap-cover-o-ring","title":"Sta-Rite Trap Cover O-Ring","description":"\u003cp\u003eThis is the trap cover o-ring for Sta-Rite pumps, carried as part number U9-375 and also as O-12. It measures 6-1\/4 inches on the inside diameter with a 1\/4 inch cross section, and it is listed for the Sta-Rite Dyna-Glas and Dyna-Max pumps from 3\/4 through 2 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters more than it looks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe trap cover o-ring is the seal between the strainer pot and its lid, which puts it on the suction side of the pump. Anything that is not airtight there does not leak water out, it draws air in. That is the difference between a pump that primes and holds and one that runs half full of air, loses flow, and eventually runs its seal dry.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat our source says, and where it disagrees\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe listing carries the Sta-Rite brand and two part numbers, U9-375 and O-12, while the description also refers to the ring as generic. We have kept both readings rather than choose one. It appears on the Sta-Rite Max-E-Glas II and Dura-Glas II, Dyna-Glas and Dyna-Max, and Pentair Dyna-Wave pump parts diagrams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWipe the groove and the lid face clean, seat the ring without twisting it, and use a silicone based o-ring lubricant. That lubricant is not optional on a lid that gets opened for basket cleaning, since a dry ring bonds to the lid and tears the next time the pot is opened.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48629118140628,"sku":"STA-101-7462","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0eaeabb-5b2a-4e9f-b7d3-1abd010417a7.gif?v=1788759872"},{"product_id":"cap-screw-8-32-x-7-8","title":"Sta-Rite Cap Screw, #8-32 x 7\/8\"","description":"\u003cp\u003eU30-542SS is the Sta-Rite cap screw in a #8-32 thread, 7\/8 inch long. It is the factory fastener, carried under Sta-Rite Dyna-Pro and Dyna-Pro E pump parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the size right\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThread and length both matter on a pump. A screw that is too long bottoms out before it clamps, and one that is too short strips the few threads it does catch. Ordering the specified part removes the guesswork on a housing you do not want to re-tap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth a spare\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eScrews corrode, round off and disappear into the deck during a rebuild. Keeping an extra on the shelf costs very little and saves an unplanned trip in the middle of a job.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48629511487700,"sku":"STA-101-3732","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e36c9e30-81b2-49f7-af15-d18399d436ce.gif?v=1788766009"},{"product_id":"impeller-3-4hp","title":"Sta-Rite Impeller for Dyna-Glas\/Dyna-Max Series and Dyna-Pro\/Dyna-Pro E Pumps","description":"\u003cp\u003eThe Sta-Rite C105-236P is the replacement impeller for the Dyna-Glas and Dyna-Max Series pumps and the Dyna-Pro and Dyna-Pro E. It is the factory part for that family.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfirm the horsepower first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers are matched to a specific horsepower, and the two source listings we hold for this part do not agree with each other: one calls it the 1\/2 HP impeller and the other calls it 3\/4 HP. Check your pump or motor nameplate and get in touch before ordering if there is any doubt. Fitting the wrong impeller for the motor either starves the pump or overloads it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the impeller does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAll of the flow a pump produces comes from the impeller spinning inside the diffuser. When vanes wear down, break, or pack with debris, the symptoms look like a system problem: weak returns, a skimmer that no longer pulls, and a filter that never reaches normal pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the pump is apart\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe impeller threads onto the motor shaft, so changing it means splitting the pump. That is the moment to fit a new shaft seal, since the old one rarely reseals once it has been disturbed. Look at the diffuser face as well, because a worn diffuser against a new impeller gives back only part of the flow you were expecting.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48633375916244,"sku":"STA-101-2806","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4ab6427d-7e87-43c7-a6b1-2d4ac6e2bca6.png?v=1788798872"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/sta-rite-max-e-pro-parts.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}