{"title":"Sta-Rite","description":"\u003cp\u003eSta-Rite pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"pentair-170145-starite-s7m120-large-and-small-cartridge-250210200s-250220201s","title":"Sta-Rite 170145 System 3 S7M120 Large and Small Cartridge Set, 25021-0200S and 25022-0201S","description":"\u003cp\u003ePentair 170145 is the genuine replacement cartridge pack for the Sta-Rite System 3 S7M120, the 21 in. modular media filter. It contains both elements the filter uses: the 25021-0200S inner cartridge and the 25022-0201S outer cartridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo cartridges that work as one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe System 3 nests a smaller cartridge inside a larger one. The inner element measures 11 in. by 11 in. by 31.25 in. and the outer 19 in. by 19 in. by 23 in. Together they give the filter its full surface area, which is why replacing only one of them rarely brings performance back.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCartridges are cleaned many times over their life, but eventually hosing no longer returns the pressure gauge to its clean reading, and pleats start to fray or collapse. That is the point to fit a new pack rather than keep cleaning.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis pack fits the S7M120 only. The S8M150, S7M400 and S8M500 in the same family take different cartridges. The model is on the tank label.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48620697419988,"sku":"STA-051-6578","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f157c2cb-828b-49b3-a55b-ba75c7ec9a62.png?v=1788573177"},{"product_id":"igniter-w-gasket-kit","title":"Sta-Rite Max-E-Therm Igniter with Gasket Kit","description":"\u003cp\u003eThe Sta-Rite 77707-0054 is the replacement igniter for Max-E-Therm SR-200, SR-333 and SR-400 pool heaters, supplied as a kit with the igniter gasket. It is a new, genuine Sta-Rite part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen an igniter cracks or burns out, the heater runs through its start sequence but never lights. Fitting a new igniter and gasket together restores ignition and renews the seal in the same job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIgniter elements are brittle and should not be touched by hand. Switch off power to the heater before starting, and if the bracket that holds the igniter is damaged it is available as a separate part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your heater is a Max-E-Therm SR-200, SR-333 or SR-400. The part is also catalogued with Pentair MasterTemp burner system parts; check the igniter part number on your parts list if you have a MasterTemp.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624880091348,"sku":"STA-151-6259","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e960027d-93c5-4819-b7fc-d8452832df88.jpg?v=1788648830"},{"product_id":"pentair-272568z-valve-top-assembly-for-sta-rite-6-position-top-mount-clamp-on-multiport-valve","title":"Pentair 6-Position Top Mount Clamp Valve Top Assembly","description":"\u003cp\u003eThe Pentair 272568Z is the valve top assembly for the Sta-Rite 263085 six position top mount clamp-on multiport valve. When a multiport valve leaks or will not hold its position, the wear is almost always in the top, and this assembly replaces that section while the valve body stays on the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made for the clamp-on style of the six position top mount valve, model 263085. Check that your valve is the clamp-on version before ordering, because the threaded and bolted top mount valves take different tops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinish the job properly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve body o-ring, the sight glass and the drain plug o-ring are separate parts. The body o-ring in particular should be replaced any time the top is removed, so order it alongside the top if yours has been in service for a while.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624880386260,"sku":"PAC-051-3071","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_117cd2c8-a69c-48fb-8898-1307fc07cd55.jpg?v=1788648880"},{"product_id":"sta-rite-s7d75-full-filter-grid-set-11-grids","title":"Filbur Sta-Rite S7D75 Full Filter Grid Set (11 Grids)","description":"\u003cp\u003eThe Filbur FS-3037 is a full eleven grid replacement set for the Sta-Rite System 3 S7D75 DE filter. It is grids only: the manifold, retainer and hardware from your existing element stay in service, and the new grids go on in place of the old ones.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the set\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree offset port grids, one at 12-7\/16 in. and two at 13-13\/16 in., and eight center port grids, two each at 9-11\/16, 12-7\/16, 15-3\/16 and 16-1\/2 in. Every grid is 18 in. long. Together they replace the complete grid pack in the S7D75 tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the filter is the S7D75. The larger System 3 S8D110 takes a thirteen grid set instead. While the tank is apart it is worth checking the 21 in. tank o-ring and replacing it if it has flattened or cracked.\u003c\/p\u003e","brand":"Unicel Filter Cartridges","offers":[{"title":"Default Title","offer_id":48624884089044,"sku":"UNI-051-3037","price":253.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8220d387-d4e7-40d8-a0cf-4184331eeb8a.jpg?v=1788649564"},{"product_id":"pentair-control-board-kit-461105","title":"Pentair Genuine OEM MasterTemp\/Max-E-Therm 6-Button Control Board Kit","description":"\u003cp\u003eThe Pentair 461105Z is the six button control board kit for MasterTemp and Sta-Rite Max-E-Therm gas heaters. It is the factory part, the same board Pentair fits on the production line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMasterTemp and Max-E-Therm heaters share this control system. On the Max-E-Therm side it covers the SR200, SR333 and SR400, where it is listed in the electrical system parts breakdown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBoard or pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the heater ignores button presses but the display and firing logic are otherwise normal, check the six button membrane pad first, since it is a separate part. If the display, temperature control or diagnostics are acting up, the board is the more likely cause.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624917938388,"sku":"PUR-151-0974","price":554.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_cc0b28f3-0582-4ad3-955f-d07534fc3e18.jpg?v=1788653288"},{"product_id":"tank-body-assembly","title":"Sta-Rite Pump Tank Body Housing Assembly, IntelliPro","description":"\u003cp\u003eThe Sta-Rite 17307-0110S is the tank body assembly, the strainer pot housing, for the IntelliPro VS 3050 and other IntelliPro variable speed pumps, the Max-E-Pro series and the Pentair Pinnacle. It is the genuine Pentair Sta-Rite part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing is the part that takes the abuse: freeze damage over a winter, a crack from an impact, or a drain plug port that has been overtightened until it will no longer seal. Once the body itself is compromised, a new o-ring or plug will not stop the leak and the housing has to be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is and is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the tank body on its own. The trap cover lid assembly, the V clamp that holds the lid, and the drain plug are separate part numbers. If any of those are damaged too, order them alongside the housing so the pump goes back together in one visit.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624918888660,"sku":"STA-101-1003","price":313.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3c6d6eff-9567-4058-8e6f-d666d4a4e752.jpg?v=1788653419"},{"product_id":"pentair-starite-s8m150-large-and-small-cartridge-filter-pack-250210202s-250220203s","title":"Pentair Sta-Rite S8M150 Large and Small Cartridge Filter Pack 25021-0202S \u0026 25022-0203S","description":"\u003cp\u003eThe Pentair 170147 is the complete replacement cartridge pack for the Sta-Rite System:3 S8M150 modular media filter. It pairs the large outer cartridge, 25022-0203S, with the small inner cartridge, 25021-0202S, so one order refreshes the whole filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMade for the S8M150\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe S8M150 is the 259 sq ft System:3 filter. Its two cartridges nest inside one another, and this pack supplies both in the correct sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCartridges are cleaned many times before they are done, but eventually a hose down no longer brings the starting pressure back to where it was, or the pleats tear and collapse. That is the point to fit a new set. Because the two cartridges age together, most owners replace both at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your filter is the S8M150. While the tank is open, check the tank o-ring, the drain plug and the air bleeder so you only open it once.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624921575636,"sku":"STA-051-6580","price":791.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_48e6df7d-2526-4b3c-a347-09d28e76fa41.png?v=1788653576"},{"product_id":"300-sqft-filter-replacement-mod-media","title":"Sta-Rite 300 Sq. Ft. Filter Replacement MOD Media","description":"\u003cp\u003eThe Sta-Rite 27002-0300S is the 300 square foot replacement modular media module for the System 2 PLM300 cartridge filter. Sta-Rite calls it MOD media: instead of several loose cartridges, the PLM filter runs a single modular element, and this is the genuine replacement for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eModular media is cleaned, not backwashed. Over time the cleanings stop restoring flow, the starting pressure creeps up, and eventually the pleats or bands give out. When that happens a new module puts the filter back to its rated 300 square feet and the pressure back to where it started.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis module is for the PLM300 only. The smaller filters in the System 2 range, PLM100 through PLM200, use their own modules, so match the size stamped on your tank before ordering. Replacement is a matter of opening the tank, lifting out the old module and setting the new one in place.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624922001620,"sku":"STA-06-290","price":586.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f7060780-64fd-46dc-89f5-918acfa43e55.jpg?v=1788653592"},{"product_id":"tank-shell-upper-half-black","title":"Sta-Rite System 2 Tank Shell Upper Half, Black","description":"\u003cp\u003eThe Sta-Rite 27001-0020S is the black upper half of the tank on System 2 modular media filters. It is the genuine Sta-Rite shell, sold on its own so a cracked or damaged top can be replaced without buying a new filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich filters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed for the System 2 PLM100 and PLM150 and appears on the Sta-Rite parts diagrams for the PLM125, PLM175, PLM200 and PLM300 cartridge filters, the PLD cartridge filters and the PLDE36 and PLDE48 DE filters. It is also cross listed for the AquaTools AT84100 and AT84150 permanent media filters and the AT8230 to AT8236 DE filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is not included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the upper shell only. The lower tank half, the position lock ring, the safety latch for the ring and the spring check valve are separate parts. Order them alongside if yours are worn.\u003c\/p\u003e\u003cp\u003eThe top and bottom photos show the shell from both sides so you can compare it against the tank on your pad before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624928162004,"sku":"STA-051-2579","price":295.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3620c1a3-fda3-4c7e-80a4-eded85450841.png?v=1788654833"},{"product_id":"pentair-474061-tube-sheet-coil-assembly-kit-cupro-nickel-for-model-400na-400lp-mastertemp-heater","title":"Sta-Rite Tube Sheet Coil Assembly Kit for Model 400NA, 400LP MasterTemp Heater","description":"\u003cp\u003eThe 474061 kit is the cupro nickel tube sheet coil assembly for Pentair MasterTemp 400NA and 400LP heaters manufactured after 1\/12\/09, the new tub design. It is the genuine Pentair Sta-Rite part and comes with everything the exchanger swap needs, not just the coil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tube sheet coil assembly itself, eight coil o-rings, eight tube sheet seals, a metal tube o-ring, a manifold bypass valve package, a blower and adapter plate gasket, an ignitor and gasket kit, a tube of high temp RTV silicone, a Koala wool insulation service kit and a sheet metal warning label.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe MasterTemp coil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMasterTemp and Sta-Rite Max-E-Therm exchangers are built around a generally round coil rather than the straight, flat tube bundle most heaters use. The end plate measures 5-1\/2 in. wide by 8-1\/2 in. tall, the assembly is about 13 in. side to side, and it runs about 15 in. from the plate to the far end of the coil. The photos show the coil from several angles for comparison with yours.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the heater is a 400NA or 400LP built after 1\/12\/09. The 200NA\/200LP and 250NA\/250LP heaters take their own kits.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624928260308,"sku":"STA-151-4061","price":1259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/474061.jpg?v=1788654846"},{"product_id":"pentair-474957-combustion-chamber-assembly-for-max-e-therm-heater","title":"Pentair Combustion Chamber Assembly for Max-E-Therm Heaters","description":"\u003cp\u003eThe Pentair 474957 is the combustion chamber assembly for the Sta-Rite Max-E-Therm gas heaters, covering the SR200, SR333 and SR400. It is the genuine part, supplied as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe combustion chamber is part of the Max-E-Therm burner system, the same group of parts as the flameholder, the insulation kit and the gas valve. Those are separate part numbers, so if the chamber has failed it is worth inspecting the rest of the burner system while the heater is apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the heater is a Max-E-Therm SR200, SR333 or SR400. Burner and combustion work on a gas appliance belongs with a qualified technician: shut off the gas, make the repair, and verify combustion before the heater goes back into service.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624928850132,"sku":"PUR-151-7042","price":385.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/Pentair_474957.jpg?v=1788654917"},{"product_id":"tank-body-assembly-max-e-glas-ii-and-dura-glas-ii","title":"Sta-Rite Tank Body Assembly for Max-E-Glas II and Dura-Glas II","description":"\u003cp\u003eThe Sta-Rite C176-59PZ is the genuine tank body assembly for the Max-E-Glas II and Dura-Glas II pumps, the series also listed as P4R, P4RA, P4E and P4EA. The tank body is the strainer pot on the front of the pump, and this assembly arrives with the trap cover, cover o-ring and strainer basket already included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is needed\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe strainer pot takes the abuse on a pump: freeze expansion, over tightened suction fittings and years of sun. Once it cracks, the pump draws air, loses prime and cavitates, and there is no reliable way to patch it. Replacing the assembly puts a sound pot, a fresh lid and a new basket on the pump in one step.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is held to the seal plate by the tank body V clamp, which is a separate part. Check it for corrosion when the old body comes off. If the diffuser o-ring or the trap cover o-ring on your old pump were the reason it was losing prime, this assembly covers the cover o-ring, and the diffuser o-ring is available separately.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624930619604,"sku":"STA-101-8558","price":305.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_debf246c-d197-43c3-8e08-96fed92f2726.jpg?v=1788655106"},{"product_id":"pentair-178745z-150-sqft-200-sqft-posi-clear-rp-replacement-lid","title":"Sta-Rite 150\/200 Sq Ft Posi-Clear RP Replacement Lid, 12.5 in.","description":"\u003cp\u003eThe Sta-Rite 178745Z is the genuine 12.5 in. tank lid for the Posi-Clear RP cartridge filter in the 150 and 200 sq ft sizes. A lid that has cracked from sun and pressure, or whose sealing edge has worn, will weep at the clamp or fail to hold pressure. This replaces it with the same Pentair part the filter came with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid alone. The tank o-ring, air relief valve and pressure gauge are separate parts, and it is worth checking each while the filter is open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMade for the Posi-Clear RP 150 and 200 sq ft models. Measure your existing lid at 12.5 in. to confirm before ordering.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624934518996,"sku":"AMP-051-1410","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_74dd2e20-8369-4a9a-907e-4da24d6e495d.png?v=1788655182"},{"product_id":"pentair-356893z-intellipro-vsf-drive-kit-with-keypad-black","title":"Pentair IntelliPro VSF Drive Kit with Keypad, Black","description":"\u003cp\u003eThe Pentair 356893Z is the genuine replacement drive and keypad for the Sta-Rite IntelliPro VSF variable speed pump, supplied in black. When the drive fails, the display goes blank, throws persistent error codes or stops responding to the keypad, and the pump will not run its programs. This kit replaces the drive assembly on top of the motor while the motor, seal and wet end stay in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe drive and its integrated keypad as one assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your pump is the IntelliPro VSF and that 356893Z matches the part number for your unit.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624934650068,"sku":"STA-101-7296","price":1264.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3760e7a0-1e9c-4414-92a2-0e2ad30741ba.jpg?v=1788655199"},{"product_id":"face-plate-screws-eyeball","title":"Sta-Rite Face Plate Inlet Eyeball Kit with Screws","description":"\u003cp\u003eThe Sta-Rite 08428-0125 is the genuine Pentair rebuild kit for SwimQuip pool inlets. It replaces the parts of a return fitting that actually wear: a white face plate, an adjustable eyeball inlet and the screws that hold the plate on.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is made for Sta-Rite SwimQuip inlet fittings with a 1-1\/4 in. IPS connection, the fitting typically set in the wall of a gunite pool. If the body in the wall is sound, this kit is all the repair needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEyeballs crack, seize or lose their grip over years of sun and chlorine, and a return you cannot aim means poor circulation. A new eyeball restores the ability to direct flow, and the fresh white face plate tidies up the wall.\u003c\/p\u003e\u003cp\u003eThis is the white kit. A gray version is available separately for pools with darker finishes.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624956506324,"sku":"STA-251-2827","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_83177378-b1fc-440e-8f82-cd95a814db31.jpg?v=1788655997"},{"product_id":"d-e-module-60-sqft-s7md60","title":"Sta-Rite DE Filter Module 60 sqft S7MD60","description":"\u003cp\u003eThe Sta-Rite 25023-0160S is the genuine 60 sq ft DE filter module for the System 3 S7MD60 modular DE filter. The System 3 uses a single module in place of the usual set of separate grids, so this one part replaces the entire filtering element.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDE showing up back in the pool, pressure that rises fast after a fresh charge, or tears, cracks or a collapsed section on inspection all mean the module is done. Cleaning will not recover a torn module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDrain the tank, remove the old module, check the tank o-ring and seat the new module. Reassemble, restart the pump and add the DE charge for the S7MD60 through the skimmer.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624959946964,"sku":"STA-06-276","price":624.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a301f4db-cde1-431b-b44a-9107563a47d7.jpg?v=1788656606"},{"product_id":"control-valve-assembly-combination-gas","title":"Sta-Rite MasterTemp and Max-E-Therm Combination Gas Control Valve Assembly","description":"\u003cp\u003eThe Sta-Rite 42001-0051S is the combination gas control valve assembly for the Pentair MasterTemp and the Sta-Rite Max-E-Therm SR200, SR333 and SR400 pool heaters. It is part of the burner system, where it regulates gas to the burner and shuts it off when the control board calls for it.\u003c\/p\u003e\u003cp\u003eMasterTemp and Max-E-Therm share the same burner design, so one part number covers both. It is sold as a complete assembly, the genuine part rather than a generic valve.\u003c\/p\u003e\u003cp\u003eBecause this is a gas component, it should be fitted by a qualified technician and every connection leak checked before the heater is put back into service. Confirm 42001-0051S against your existing valve or your heater parts list before ordering.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624970039508,"sku":"STA-151-6250","price":435.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_47f64a15-545f-4b27-9da2-76d1c49d3077.jpg?v=1788656949"},{"product_id":"valve-gauge-assembly","title":"Sta-Rite Valve and Gauge Assembly for System 3 Filters","description":"\u003cp\u003eThe Sta-Rite 24850-0105 is the air relief valve and pressure gauge assembly for System 3 filters. It is the genuine Pentair part and comes as a complete kit: the pressure gauge, the tee, a 1\/4 in. nipple, an adapter bushing and the o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe gauge is how you read the filter. Clean pressure tells you the baseline, and a rise of several psi tells you it is time to clean the cartridges, backwash the DE or the sand. The valve above it bleeds the air that collects at the top of the tank after a cartridge clean or when the pump is primed. A gauge stuck at zero, a cracked lens or a valve that will not seal are the reasons this assembly gets replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt fits across the System 3 line: the SM series modular media cartridge filters S7M120, S7M400, S8M150 and S8M500, the SD series DE filters S7D75 and S8D110, and the SS series sand filter S8S70. The internal air bleed assembly is a separate part.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624992714964,"sku":"STA-051-2592","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b49f63bc-36d6-4e45-afdf-4ab7cb15e68d.png?v=1788661501"},{"product_id":"max-e-pro-seal-plate","title":"Sta-Rite Max-E-Pro Seal Plate","description":"\u003cp\u003eThe Sta-Rite C103-194PZ is the genuine seal plate for the Max-E-Pro 5P6R pool pump. It is the same plate Pentair lists for the 50Hz MG II, DG II and IntelliPro pumps, and it was previously sold under the number C103-194P.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the seal plate does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal plate closes the back of the pump volute against the motor and carries the shaft seal. If yours has cracked, warped from a dry run, or has a worn seal seat that will not hold a new seal, this is the part to replace. A damaged plate will keep weeping no matter how many seals you install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis listing is the plate only. Because the pump has to be split at the motor to change it, most techs fit a new shaft seal and pump lid o-ring in the same job so the pump is not opened twice.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48624996679892,"sku":"STA-101-1265","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e9c8c091-c843-4350-9ac6-f3dfd26bc81e.png?v=1788661619"},{"product_id":"21-filter-tank-o-ring","title":"Sta-Rite 21 in. Filter Tank O-Ring, System 3","description":"\u003cp\u003eThe Sta-Rite 24850-0008Z is the tank o-ring for System 3 filters with the 21 in. tank. It is a Pentair part, and it fits the S7S50 and S8S70 sand filters among others in the System 3 family built on that tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck your tank size first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSystem 3 filters come in more than one tank size. The 25 in. tank, used on the S8D110, takes a different o-ring. If you are not sure which you have, measure across the tank at the seam.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove, lightly lubricate the new ring with a silicone o-ring lubricant, seat it and bring the tank halves together evenly. A drip at the seam after reassembly usually means the ring was pinched or the groove was not clean.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48624998514900,"sku":"STA-051-2809","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a545f93e-f2b5-4f27-a56d-43c1e06ff4ec.jpg?v=1788661784"},{"product_id":"air-flow-switch","title":"Sta-Rite Max-E-Therm Air Flow Switch","description":"\u003cp\u003eThe Sta-Rite 42001-0061S is the air flow switch for the Max-E-Therm SR200, SR333 and SR400 pool heaters. It is a new, genuine OEM part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe air flow switch sits in the heater's electrical system and proves that the combustion blower is moving air. Only when it closes does the control let the ignition sequence go ahead. A switch that has failed or will not close leaves a heater that hums the blower but never lights, which is one of the more common Max-E-Therm complaints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause it is the factory part, it mounts and wires exactly like the switch coming out. It belongs to the same electrical group as the terminal board, transformer, ignition control module, thermistor and high limit switch, so if you are working through a no-ignition fault, those are the other parts to check.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625001332948,"sku":"STA-151-7186","price":161.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b46c12e5-5e4e-41ac-8717-e13a9b2cc41a.jpg?v=1788661891"},{"product_id":"pentair-476223-ignition-control-module-replacement-kit","title":"Pentair MasterTemp Max-E-Therm Ignition Control Module Replacement Kit","description":"\u003cp\u003eThe Pentair 476223Z is the ignition control module replacement kit for Pentair MasterTemp and Sta-Rite Max-E-Therm pool heaters. It is the genuine Pentair part, also listed under the earlier number 476223.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the module does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ignition control module runs the heater's lighting sequence: it confirms the safeties are satisfied, energizes the igniter, opens the gas valve and watches for flame. When it fails, the heater typically runs the blower and then locks out without ever firing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiagnosing before you buy\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA no-ignition fault can also come from the igniter, the air flow switch, the terminal board or the gas supply. Rule those out first; if the sequence stalls at the module, this kit is the fix.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625005658324,"sku":"PUR-151-0973","price":330.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d9cd3327-44ce-40d8-8320-0f763e18af05.jpg?v=1788661912"},{"product_id":"sand-filter-drain-cap","title":"Pentair Genuine OEM Sand Filter Drain Cap","description":"\u003cp\u003eThe Pentair 154712 is the drain cap for a family of top mount sand filters sold under three names: the Sta-Rite Cristal-Flo II, the Pentair Sand Dollar, and the American Products Eclipse and Meteor. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cap closes the drain port at the bottom of the tank. With it in place the filter holds pressure; with it off, the tank empties. That makes it the part you handle at every winterizing and every sand change, and the one most likely to be cracked or misplaced by the time spring comes around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your filter is one of the models listed. Sta-Rite and Pentair are the same company, so a Cristal-Flo II owner ordering a Pentair numbered cap is getting the right part.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625020633300,"sku":"PAC-051-0056","price":35.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_72409409-4a1d-4038-9451-9bfc2c067364.jpg?v=1788662338"},{"product_id":"pentair-474958-combustion-chamber-cover-for-max-e-therm-heater","title":"Pentair Combustion Chamber Cover for Max-E-Therm Heaters","description":"\u003cp\u003eThe Pentair 474958 is the combustion chamber cover for the MasterTemp 125 and Sta-Rite Max-E-Therm 125 heaters, on units manufactured after 11\/16\/13 with the newer 9 bolt lid tub design. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cover closes the top of the burner chamber. If it is warped, cracked or corroded, combustion gases can escape and the airflow through the burner is disturbed, which shows up as poor ignition, soot or a heater that runs rough. Replacing the cover restores the seal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 125 size cover only; larger MasterTemp and Max-E-Therm heaters use different parts. Check the build date on the heater rating plate and count the lid bolts. Nine bolts and a date after 11\/16\/13 confirms the match. Gaskets are not included and are available as a separate Pentair kit.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625021354196,"sku":"PUR-151-4441","price":445.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/pentair_474958.jpg?v=1788662450"},{"product_id":"seal-plate-kit-max-e-pro","title":"Sta-Rite Seal Plate Kit for Max-E-Pro, Max-E-Glas II and Dura-Glas II C203-194P","description":"\u003cp\u003eThe Sta-Rite C203-194P is the seal plate kit for Max-E-Pro, Max-E-Glas II and Dura-Glas II pumps. It is the new style plate without the copper insert, and it ships with a shaft seal and the seal plate o-ring so the pump goes back together with fresh sealing surfaces on both sides of the plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNew style, no copper insert\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEarlier Sta-Rite seal plates carried a copper insert. This kit is the current design without it, and it is the replacement Sta-Rite specifies for those older plates as well as for pumps that already have the new style.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite Max-E-Pro, Max-E-Glas II and Dura-Glas II. The same kit is also listed on the Pentair Pinnacle and IntelliPro VS 3050 parts diagrams. If the pump has been leaking at the seal or the plate itself is cracked or worn where the seal seats, this kit covers the whole repair in one part number.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625021616340,"sku":"STA-101-1464","price":176.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_724f1ae9-e245-4878-bda4-b4392fa95922.gif?v=1788662480"},{"product_id":"black-supermax-volute-housing","title":"Sta-Rite Black SuperMax Volute Housing 351089Z","description":"\u003cp\u003eThe Sta-Rite 351089Z is the black volute housing for SuperMax High Pressure and SuperMax VS variable speed pumps. The volute is the body the impeller spins inside, so a cracked or stripped one takes the whole pump out of service. This is the genuine Pentair replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite SuperMax High Pressure and SuperMax VS. The same housing appears on the Pentair SuperFlo VS parts diagram, which shares the platform. It is the black version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the job once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith the wet end apart, fit a new 5\/8 in. mechanical shaft seal (PAC-101-4545). If the clamp, ramp and cam (STA-101-5180) are worn or the unions are cracked, the SuperFlo and SuperMax union kit (PAC-101-0157) finishes the job.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625021780180,"sku":"STA-101-1368","price":262.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5abc3bcd-f6ec-4398-9bb1-d8300b424022.png?v=1788662490"},{"product_id":"tube-sheet-coil-assembly-kit-sr400","title":"Sta-Rite MasterTemp and Max-E-Therm Tube Sheet Coil Assembly Kit","description":"\u003cp\u003eThe Sta-Rite 77707-0234 is the tube sheet coil assembly kit for Pentair MasterTemp and Sta-Rite Max-E-Therm heaters, models 400NA and 400LP, built prior to 1-12-09.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes these heat exchangers different\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn the MasterTemp and Max-E-Therm, the tubes in the tube sheet assembly are generally round in shape rather than straight and flat like most other heaters on the market. The plate at the end of the tubes measures 5-1\/2 in. wide by 8-1\/2 in. tall, the assembly is roughly 13 in. side to side, and it runs about 15 in. from the end of the plate to the opposite end of the coil.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA kit, not just a coil\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplacing a heat exchanger disturbs a lot of sealing surfaces, and this kit accounts for that. It includes eight coil o-rings, eight tube sheet seals, the tube sheet coil assembly, a sheet metal warning label, a metal tube replacement o-ring, a manifold bypass valve package, a tube of high temperature RTV silicone, a koala wool insulation service kit, a blower and adapter plate gasket, and an ignitor and gasket kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the model and build date on the heater data plate. This kit is for 400NA and 400LP units built prior to 1-12-09, and heaters built after that date use a different assembly.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625580966100,"sku":"STA-151-6264","price":1196.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0d5f0da3-871c-4455-bcc0-38d228afa04c.png?v=1788688837"},{"product_id":"weir-assembly-938","title":"Pentair Weir Assembly for Sta-Rite U-3 Skimmer","description":"\u003cp\u003eThe Pentair 08650-0022 is the hinged weir door assembly for Sta-Rite and SwimQuip U-3 skimmers. It is the genuine Pentair OEM part, molded to the original specification so it fits without filing or adjustment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne piece by design\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir door and its vertical hinge strip are molded as a single assembly. They are not meant to come apart. Keeping them together is what gives the door its structural strength and its consistent movement in the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizes and markings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir body measures 8-1\/2 in. long by 5-1\/8 in. wide. The hinge strip is 8-1\/4 in. long by 13\/16 in. wide and carries five holes in two rows. If you want to confirm the match before ordering, check the old part: the weir body is marked PAT. 270235 and 8650-4, and the hinge is marked 8650-8.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation and what it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hinge strip slots inside the skimmer housing behind the small retaining posts and is secured with one or two screws depending on the setup. The door then floats on a horizontal plane and follows the water level, which is what keeps surface debris flowing into the skimmer. A weir that no longer stays upright, has broken prongs or a worn hinge, lets leaves and bugs drift back out of the throat, and this assembly restores the skimming action.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625581129940,"sku":"SWQ-251-3791","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9b615d62-564b-4ad6-8554-5b1ff6ab472a.jpg?v=1788688882"},{"product_id":"stand-pipe-assembly-sd60","title":"Pentair Genuine OEM Stand Pipe Assembly SD60","description":"\u003cp\u003eThe Pentair 152227 is the stand pipe assembly for the Sand Dollar SD60 above ground pool and spa sand filter, and for the Sta-Rite Cristal-Flo II high rate sand filter on the 22 in. tank. It is the genuine Pentair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stand pipe runs down the center of the tank and carries filtered water from the bottom of the sand bed back up to the valve. The laterals at its base collect that water while holding the sand back. When the pipe cracks or a lateral breaks, sand slips past and shows up in the pool through the return jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the model on the filter label. The SD60 is the largest of the Sand Dollar tanks and the SD35 and SD40 use their own parts. Reaching the stand pipe means emptying the sand out of the tank, so plan on fresh media for the same visit.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625586405588,"sku":"PAC-051-9301","price":132.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7cd44efe-a216-4fd9-8a18-7292979014d9.png?v=1788689020"},{"product_id":"impeller-7-5-hp","title":"Sta-Rite Closed Face Impeller, 7.5 HP, Bronze","description":"\u003cp\u003eThis is the bronze closed face impeller for the Sta-Rite CSPH and CCSPH series commercial pumps, part number 16830-0209. It is rated 7.5 HP at 60 Hz and 5 HP at 50 Hz, and it is catalogued under Pentair with the same number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBronze and closed face\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCommercial duty pumps run long hours against real head, and the wet end is built for it. The impeller is cast bronze rather than plastic, and the closed face design is what the CSPH and CCSPH volute is matched to. A different profile will not develop the same curve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch the motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers in this family are horsepower specific. Read the motor nameplate and check both the horsepower and the frequency before ordering, since the same casting covers 7.5 HP at 60 Hz and 5 HP at 50 Hz but not the ratings above or below it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the pump is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft mechanical seal for the CSPH and CCSPH is a separate part, and pulling the impeller is what gets you to it. Replacing it during the same job saves a second teardown.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625588830420,"sku":"STA-101-1469","price":1255.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9f557d80-e1e7-45e0-ba6c-4a142c6ede16.jpg?v=1788689109"},{"product_id":"abs-6-posistion-valve-with-piping","title":"Sta-Rite ABS 6-Position Valve with Piping","description":"\u003cp\u003eThe Sta-Rite 18201-0200 is the 2 in. ABS side mount multiport valve, supplied as a kit with its piping and union nuts. It is used on the Sta-Rite S7D75, S8D110, S7S50 and S8S70 filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a multiport valve does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA multiport valve replaces a bank of separate valves with one handle. Six positions cover the routines a filter needs, so filtering, backwashing and rinsing are a matter of moving the lever rather than repiping anything.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction and fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is molded ABS, which holds up to years of handle movement and weather at the equipment pad. Because the kit includes union nuts, the valve can be taken off later for service without cutting into the plumbing. Check that your filter is one of the four listed models before ordering, since top mount filters use a different valve.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625710661844,"sku":"STA-06-273","price":354.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f50aa539-e65a-4274-961c-5e409ba70f33.jpg?v=1788688903"},{"product_id":"o-ring-for-tank-after-2-97","title":"Sta-Rite Genuine OEM Tank O-Ring, After 2\/97","description":"\u003cp\u003eThe Sta-Rite 27001-0061S is the tank o-ring for filters built from February 1997 to the present. It measures 15-1\/4 in. inside diameter with a 3\/8 in. cross section, and it is the genuine Sta-Rite part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich filters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSystem 2 Modular Media filters, System 2 Modular D.E. filters, and PLM filter systems manufactured in 2009 and beyond.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite changed this ring in 2\/97, so an older tank needs the earlier version instead. If you are not sure how old the filter is, measure the old ring. This one is 15-1\/4 in. across the inside with a 3\/8 in. cross section, and a ring that has taken a set will read slightly flatter than that.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove and the sealing faces before the new ring goes in, and tighten the band clamp evenly around the tank. A ring that is pinched or sitting on grit will keep weeping no matter how tight the clamp goes.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625712660692,"sku":"STA-051-2511","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_54dcb1b2-fc9e-44bc-91b4-27d0e5f8c8e4.jpg?v=1788689161"},{"product_id":"position-lock-ring-modular-filter","title":"Sta-Rite Position Lock Ring, Modular Filter","description":"\u003cp\u003eThe Sta-Rite 27001-0054S is the position lock ring, also called the Posi-Lok ring, for System 2 modular media filters. It is the genuine Sta-Rite part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe filter tank is built as an upper and a lower half. The lock ring goes around the joint between them and holds the two together against the pressure inside. Everything the filter does depends on that ring staying intact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inside diameter is approximately 16 in. The inner lip, the part that grips the tank flange, is approximately 3\/4 in. thick. Sta-Rite used more than one ring size across the modular filter range, so compare those measurements with your old ring before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSun and years of clamping load make the plastic brittle. A ring that has cracked, split or lost its shape has to be replaced rather than coaxed back on, since it is the only thing keeping a pressurized tank closed.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625721639124,"sku":"STA-051-2790","price":222.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_5f82a8e7-e099-4e75-bc9d-0cd65e10510a.png?v=1788689926"},{"product_id":"100-sqft-filter-replacement-module","title":"Sta-Rite 100 Sq. Ft. Filter Replacement Module for PLM100","description":"\u003cp\u003eThe Sta-Rite 27002-0100S is the 100 sq. ft. filter replacement module for the System 2 Modular Media filter, model PLM100. It is the original Sta-Rite replacement and carries the manufacturer number 24800-0121.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA module, not a bare cartridge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe System 2 filter uses a complete media module rather than a loose element, and the air bleed assembly comes fitted to it. That means the replacement drops in as one piece with nothing to transfer over from the old one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe round section measures 13 in. in diameter and the module stands 18-3\/8 in. tall. The top opening is a figure 8 shape, 6-1\/4 in. by a maximum of 4-1\/2 in. Measure the old module if you are unsure which one you have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the filter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis module is for the PLM100. The larger PLM150 takes the 150 sq. ft. module, which is a separate part, so check the model on the tank label before ordering.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625722589396,"sku":"STA-05-246","price":300.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8ed15d7a-0fac-41a7-9a7d-0677fa1ba5f0.png?v=1788690040"},{"product_id":"manifold-s8d110","title":"Sta-Rite Manifold for System 3 S8D110 DE Filter","description":"\u003cp\u003eThe Sta-Rite 24801-0101 is the manifold for the System 3 SD series DE filter, model S8D110. It is the genuine factory part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInside a DE filter, the grids stand in a frame and drain into a manifold. Filtered water collects there and leaves the tank through the outlet. If the manifold cracks, splits at a port or warps, the seal to the grids is lost, water bypasses the media, and DE powder shows up in the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the label on the tank reads S8D110. Replacing the manifold means opening the tank and lifting the grid assembly out, so it is a good moment to inspect the grids and the tie rod at the same time.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625724195028,"sku":"STA-051-2690","price":181.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_14b25fd0-9746-4423-b3c1-d7208cdb3069.jpg?v=1788690111"},{"product_id":"heater-manifold-kit-sr333","title":"Sta-Rite MasterTemp Heater Manifold Assembly, SR333","description":"\u003cp\u003eThis is the heater manifold assembly kit for the SR333, Sta-Rite part number 77707-0015. It is sold as a kit rather than as a bare manifold, so the parts that come off with it are all in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit contains the coil and tubesheet sealing o-ring kit, the manifold bypass kit, a water pressure switch, a connector tube kit made up of one connector tube and one o-ring, a 428-60 PS zinc plug, the automatic gas shutoff switch, the high limit switch and the thermistor. That covers the water side of the heater and the safety devices that mount on it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIdentify the model first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source describes this part both as a MasterTemp heater manifold assembly and as the Sta-Rite Max-E-Therm SR333 manifold. Rather than choose between those two descriptions, read the model number from your heater plate and confirm it says SR333 before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe zinc plug\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe zinc plug included in the kit is a sacrificial anode. It is a consumable that protects the manifold and heat exchanger from corrosion, so fit the new one rather than reusing the old.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625743298772,"sku":"STA-151-6277","price":492.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d760fee9-66af-44a1-92e1-c8a416c50d0d.jpg?v=1788690581"},{"product_id":"pcb-enclosure-nat-lp-with-topside","title":"Sta-Rite Max-E-Therm Control Board Enclosure with Topside Panel, Natural Gas and LP Models","description":"\u003cp\u003eSta-Rite 77707-0013 is the Max-E-Therm control board enclosure supplied with the topside controls. It is a new OEM part and covers the SR-200, SR-333 and SR-400 heaters in both natural gas and LP versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the enclosure together with the topside control panel, so it takes in both the housing that protects the electronics and the face the owner presses to set temperature and mode. Note that the same part number is described in two ways in the manufacturer listings, as a PCB enclosure with topside controls and as a control board enclosure membrane panel kit. Compare what you are removing against the photos before ordering rather than assuming from the name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it fails\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe topside sits outdoors and takes weather, sun and thousands of button presses. Buttons that need a hard push, a display that has gone dim behind a clouded window, or water that has found its way past a split membrane are all reasons to replace the assembly rather than chase the fault deeper into the control system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFuel type\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne part number serves natural gas and LP, so there is no need to work out which fuel version you have before you order.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625743823060,"sku":"STA-151-0013","price":237.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7416c3e7-2ab1-4420-8c20-7acf97c6b96c.jpg?v=1788690648"},{"product_id":"lower-tank-shell-half-plm-pld","title":"Sta-Rite Lower Tank Shell Half for PLM and PLD Filters","description":"\u003cp\u003e27001-0009S is the lower tank shell half for Sta-Rite PLM and PLD filter systems, and for the System 2 Modular Media and System 2 modular DE filters that share the same two piece tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese filters use a tank split across the middle and held together by a lock ring. This part is the bottom half. If the shell has cracked, split at the clamp lip or gone chalky and brittle with age, it has to be replaced rather than repaired, because the tank is a pressure vessel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat carries over\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe cartridges or grids, the internal assemblies and the plumbing connections all move to the new shell. While the filter is open it is worth checking the lock ring, the safety latch and the tank body O-ring, since those are the parts that wear alongside the shell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGenuine part\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the factory shell, sold under the Sta-Rite and Pentair names, so it matches the original mating surface and the lock ring already on your filter.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625744478420,"sku":"STA-051-2580","price":523.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f85fed0f-6cf1-40bc-8abb-42a6611fd126.jpg?v=1788690746"},{"product_id":"air-bleed-assembly","title":"Sta-Rite Air Bleed Assembly","description":"\u003cp\u003eThe Sta-Rite 24800-0120 is the genuine air bleed assembly, the relief fitting that vents air trapped at the top of a filter tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy bleeding matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery time a filter is opened, or the pump loses prime, air collects at the top of the tank. That air displaces water, so less of the media is actually doing work, and the pressure gauge reads something that does not reflect what is happening inside. Opening the air bleed until water runs steadily is what clears it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir bleeds corrode in place and seize, and the stem frequently snaps when someone leans on one that has not moved in several seasons. A bleed that weeps continuously or will not close is worth replacing rather than working around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it appears\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite lists this assembly across a broad set of filter diagrams, including the System 3 D.E. and SM cartridge models, the Posi-Flo TX and TR, the System 2 PLD and PLDE series, and the Sta-Rite PLD aboveground cartridge system. It also appears in Hayward Super Star-Clear and SwimClear cartridge filter diagrams. Check your filter against its diagram before ordering.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625746247892,"sku":"STA-051-2691","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ab76d34c-d1b4-4f28-92b0-8c649d6b426c.png?v=1788690900"},{"product_id":"valve-body-o-ring","title":"Pentair Genuine OEM Valve Body O-Ring for Cristal-Flo II and Sand Dollar Filters","description":"\u003cp\u003eThe Pentair 272541 is the valve body o-ring listed for Sand Dollar and Tagelus top mount sand filters and the Sta-Rite Cristal-Flo II. It is the genuine Pentair part, molded in rubber and listed at 3\/16\" x 4-3\/4\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat an o-ring does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn o-ring is a simple circle of rubber that sits in a groove and gets squeezed between two parts. That squeeze is the seal. As the rubber ages it hardens and takes the shape it has been held in, and once it stops springing back, the joint starts to weep.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it goes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis one seals the valve body on the filter systems listed above. It also appears in the PacFab 1-1\/2 in. multiport and 6 way Hi-Flo multiport valve parts diagrams, so check the diagram for your equipment against the part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWorth doing while you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eValve work is mostly disassembly time. When the valve is already apart, replacing the o-ring costs very little compared with taking it apart a second time a month later.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":48625746772180,"sku":"PAC-051-8099","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3be969f6-28fd-4855-b8fa-553f8bae8a73.png?v=1788691295"},{"product_id":"switch-f-water-pressure","title":"Pentair MasterTemp Water Pressure Switch","description":"\u003cp\u003eThe Pentair 42001-0060S is the water pressure switch for the MasterTemp heater and the ETi 400 High Efficiency heater. It is part of the heater water system, the group of components on the water side of the heater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pressure switch is a safety. It senses that water is actually moving through the heat exchanger and closes to allow the heater to fire. If it does not close, the heater will not light, which is exactly the behavior you want when flow is low or absent.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe fault it causes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause it is a gatekeeper, a failed pressure switch presents as a heater that simply will not come on. The pump runs, the filter is clean, the thermostat is calling, and nothing happens. Once flow has been ruled out, the switch is one of the first parts to test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA note on branding\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis part appears in the source data under both the Pentair and Sta-Rite names. The number that matters is 42001-0060S.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625747722452,"sku":"STA-151-6251","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_92d0308c-7974-4048-a5f8-e103b747c71e.png?v=1788691444"},{"product_id":"u-3-skimmer-basket-with-handle","title":"Pentair U-3 Skimmer Basket with Handle","description":"\u003cp\u003eThis is the replacement basket with handle for the U-3 model skimmer, the skimmer sold over the years under the Pentair, Sta-Rite and Swimquip names on concrete and vinyl pools. Pentair part number 08650-0007Z.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMeasurements\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket is 5 1\/4 in deep with an 8 1\/4 in top diameter and a 5 3\/4 in bottom diameter. That taper is what seats it properly in the U-3 throat, so a basket from another skimmer will either sit high or drop through. If you are not certain which skimmer you have, measure the old basket at the rim first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is worth changing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA skimmer basket takes the first pass at leaves and debris. Once the mesh cracks or the rim splits, debris slips past and ends up in the pump strainer basket or, worse, wedged in the impeller. A basket is the cheapest part in the whole suction line and the one that protects everything downstream of it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe handle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle is molded onto the basket. Full baskets are heavy and slippery, and a handle is the difference between a clean lift and dumping half the load back into the pool.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625748377812,"sku":"SWQ-251-3789","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_567d4f07-20e2-49fa-8ec7-d4b7b1fef621.jpg?v=1788691527"},{"product_id":"elbow-and-bulkhead-assembly","title":"Sta-Rite System:3 Elbow and Bulkhead Assembly","description":"\u003cp\u003eThis is the 25021-0100Z elbow and bulkhead assembly for the Sta-Rite System:3 Modular Media SM series filter. It is listed with the S7M120, S7M400, S8M150 and S8M500 models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bulkhead is the port through the filter tank wall, and the elbow turns the flow at that point. It is a joint that has to seal under pressure for years. When the assembly cracks, distorts or the sealing face is chewed up, the symptom is a weep or a drip at the tank that no amount of tightening cures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the model, not the media\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur source describes this part both as a Modular Media SM series D.E. filter part and as a System:3 SM cartridge filter part, for the same four model numbers. Rather than choosing between those readings, match your filter to the model numbers listed above. The bulkhead o-ring is a separate part, so inspect it while the assembly is out.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625749131476,"sku":"STA-051-2951","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1847f5a5-2b22-40ef-a2f9-597793d65282.gif?v=1788691661"},{"product_id":"tank-body-v-clamp","title":"Sta-Rite Tank Body V Clamp","description":"\u003cp\u003eThis is the C19-37AZ, the V clamp that holds the tank body of the pump together. It is listed for the Max-E-Glas II and Dura-Glas II, the Max-E-Pro series, IntelliPro, and the original Max-E-Glas and Dura-Glas pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe clamp is part of the seal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt looks like a plain band, but the clamp is what applies even pressure around the housing gasket. Years of chlorine, sun and the odd overtightened knob leave clamps stretched, distorted or corroded, and once that happens the pump weeps at the seam whatever gasket you put in. If you have replaced a housing gasket and the leak came back, the clamp is the next thing to look at.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoing the job once\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe clamp knob is a separate part number and usually ages alongside the clamp, so check both. If the pump is coming apart for a shaft seal or a gasket anyway, changing a tired clamp at the same time adds a couple of minutes rather than a second service call.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625749262548,"sku":"STA-101-5155","price":121.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_000ab224-2f6a-45d6-b5eb-2e077c26679c.gif?v=1788691669"},{"product_id":"diffuser-75hp-2-5hp-full-rated","title":"Sta-Rite Max-E-Glas\/Dura-Glas Diffuser .75HP \/ 2.5HP Full Rated","description":"\u003cp\u003eThe Sta-Rite C1-200PAZ is the replacement diffuser for Max-E-Glas and Dura-Glas inground pool and spa pumps. It is a durable molded plastic part, and the front of the diffuser itself carries C1-200PA.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGetting the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe horsepower range is stated two ways in the source material. The listing title reads .75HP to 2.5HP full rated, and the manufacturer note reads 1 through 2-1\/2 HP full rated, with the body text describing 3\/4 HP through 2-1\/2 HP full-rate and up-rate pumps. Rather than guess, match the physical part: 6-1\/2 inch diameter, 9\/16 inch thickness at the outside edge of the vane, 1-7\/8 inch from the back of the vanes to the front of the intake, a 1-7\/8 inch inlet ID and a 2-1\/4 inch inlet OD.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat to look at\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt has five vanes, each about 2-5\/8 inches long, and five screw holes. A brass sleeve is permanently attached inside the inlet, which is a useful way to tell this diffuser apart from similar looking parts. Since the pump has to come apart to reach it, check the impeller and the strainer basket while you are in there.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625749786836,"sku":"STA-101-3716","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f0adff19-5261-468b-9ead-1f178f6b964c.png?v=1788691741"},{"product_id":"z-flex-appliance-adapter","title":"Sta-Rite Z-Flex Appliance Adapter","description":"\u003cp\u003eThe Sta-Rite 77707-0087 is a Z-Flex appliance adapter for horizontal and vertical positive pressure venting. It is made of stainless steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it connects\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe adapter is the fitting between the heater and the vent run. It is designed for the Pentair Sta-Rite Max-E-Therm pool and spa heaters, and is also compatible with the Pentair MasterTemp pool and spa heaters, which share the same venting arrangement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlue gases from a pool heater are hot and wet. Stainless steel is the material a positive pressure vent connection needs if it is going to last, which is why the factory adapter is built from it rather than a coated mild steel.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625784291540,"sku":"STA-151-6268","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_67439bc5-628c-40ce-8c0c-d46580d975eb.jpg?v=1788692219"},{"product_id":"impeller-75hp-full-rate-1hp-up-rate","title":"Sta-Rite Max-E-Pro Impeller .75HP Full Rate \/ 1HP Up Rate","description":"\u003cp\u003eThe C105-238P is the impeller assembly for the Sta-Rite Max-E-Glas II, Dura-Glas II and Max-E-Pro series inground pumps, rated 3\/4 horsepower full rate and 1 horsepower up rate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the rating\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers are cut for a specific horsepower. The same pump housing takes several different impellers, and fitting the wrong one changes the flow the pump produces. Read the full rate or up rate designation off the pump label rather than going by the horsepower figure alone, since 3\/4 HP full rate and 1 HP up rate are the same impeller here.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWeak flow with a clean filter, an empty pump basket and no air in the lid usually means the impeller. Either the vanes have worn away their edges over years of service, or the narrow passages between them have packed with hair, pebbles or leaf fragments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are in there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReaching the impeller means pulling the motor assembly out of the housing, which puts the shaft seal right in front of you. It is the standard companion part on this job.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625784389844,"sku":"STA-101-8551","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f09d5ce7-aff9-4589-9174-eaeee135d727.gif?v=1788692232"},{"product_id":"impeller-2hp-full-rate-2-5hp-up-rate","title":"Sta-Rite Max-E-Pro Impeller 2HP Full Rate\/2.5HP Up Rate","description":"\u003cp\u003eThe C105-238PEBAZ is the impeller assembly for Sta-Rite Max-E-Pro, Max-E-Glas II and Dura-Glas II inground pumps, rated 2 horsepower full rate and 2-1\/2 horsepower up rate. It is the genuine part, listed under both the Sta-Rite and Pentair names.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the right impeller\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite builds a different impeller for every horsepower step in these pump families, and they are not interchangeable. The motor label is what decides it. This one covers two ratings at once: a 2 horsepower full rate motor and a 2-1\/2 horsepower up rate motor use the same impeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a worn impeller looks like\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlow falls off, the filter pressure reads low, and a heater or chlorinator that depends on flow starts throwing faults. Often nothing sounds wrong. Debris lodged in the vanes, or vane edges worn thin over years of service, quietly costs the pump a large share of its output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the wet end is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGetting to the impeller means going through the seal plate, so the shaft seal is the standard companion replacement. Inspect the impeller o-ring and the diffuser at the same time rather than opening the pump twice.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625785077972,"sku":"STA-101-9692","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d1fe0339-ccc2-4725-adad-1057c9dc7b45.gif?v=1788692321"},{"product_id":"21-lower-tank-half","title":"Sta-Rite 21\" System 3 Lower Tank Half","description":"\u003cp\u003eThis is the lower tank half for the 21 inch Sta-Rite System 3 filter, part number 24850-0102S. It is the bottom shell of the filter body, the piece that holds the internals and carries the plumbing connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich filters it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite used the same 21 inch tank across several System 3 models, so this half serves the modular SMD Series D.E. filter, the SD Series D.E. filter model S7D75, and the SS-Series sand filters S7S50 and S8S70. Confirm your model tag before ordering, since System 3 filters were also built in larger tank sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA tank half is bought when the shell itself has failed: a crack, a split at the clamp band, or a leak that keeps coming back after a new o-ring and a careful clamp. Once the tank is compromised, no seal will hold it, and the shell has to be replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat carries over\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe internals stay with your filter. Grids, the manifold, the drain plug and the plumbing all move into the new half. The tank o-ring that seals the two halves together is a separate item, and fitting a fresh one is standard practice any time the filter is split open.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625785405652,"sku":"STA-101-2250","price":1147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_305786d8-06ee-40d1-9c05-b3292a0aae3b.jpg?v=1788692355"},{"product_id":"thermistor","title":"Sta-Rite Thermistor for Max-E-Therm and MasterTemp Heater Electrical System","description":"\u003cp\u003eSta-Rite 42001-0053S is the replacement thermistor for the Max-E-Therm SR-200, SR-333 and SR-400 heaters. The same sensor is part of the MasterTemp heater electrical system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe thermistor is the heater control board eyes on water temperature. Its resistance changes with temperature, the board reads that, and everything downstream follows: what the display shows, when the burner fires, when the heater satisfies the setpoint and shuts down.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen it is the problem\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA drifting or failed thermistor makes the heater behave in ways that look like other faults. Temperatures that read nothing like the pool, a heater that will not fire even though the pool is cold, or short cycling near setpoint all point at the sensor. It is an inexpensive part to change and a common one to find at fault.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is a direct OEM replacement, so it goes back into the same location on the same wiring. Kill power at the breaker before opening the heater.\u003c\/p\u003e","brand":"Sta-Rite","offers":[{"title":"Default Title","offer_id":48625790025940,"sku":"STA-151-6254","price":96.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a27c6fbf-5ba5-464c-96d7-4cc536955b40.jpg?v=1788700123"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/sta-rite.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}