{"title":"SuperPro","description":"\u003cp\u003eSuperPro pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"superflo-supermax-pump-repair-kit","title":"SuperPro Superflo \/ Supermax Pump Repair Kit, GO-KIT78","description":"\u003cp\u003eThe SuperPro GO-KIT78 is the seal and o-ring kit for Pentair SuperFlo and Sta-Rite SuperMax pool pumps. It puts the shaft seal and every o-ring you disturb during a reseal in one bag.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne AS-200 shaft seal, one O-130 drain plug o-ring, one O-150 lid o-ring, one O-395 diffuser o-ring and one O-465 seal plate o-ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to use it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA drip from the gap between the motor and the seal plate means the shaft seal has let go. Getting to it means splitting the pump, and once the pump is apart the diffuser and seal plate o-rings are exposed and cheap to change, while a new lid and drain plug o-ring stop the air leaks that cause a pump to lose prime. Doing all of it in one visit avoids opening the pump twice.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48624919871700,"sku":"SPG-601-6101","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_879213dd-e7b6-41e5-9e1b-941daa34f9a8.jpg?v=1788653445"},{"product_id":"7-diameter-105-sqft-advanced-ultra-replacement-filter-cartridge-4-pack-pentair-clean-clear-plus-420","title":"Pleatco 7 in. Diameter 105 Sq Ft Advanced Ultra Replacement Filter Cartridge 4 Pack for Pentair Clean and Clear Plus 420, X15-ULT-A6-Q4","description":"\u003cp\u003eThe Pleatco X15-ULT-A6-Q4 is a four pack of Advanced Ultra replacement cartridges for the Pentair Clean and Clear Plus 420 filter. Each cartridge is 7 in. in diameter with 105 sq ft of filter area, matching the OEM cartridge the CCP420 was built around, and the four together replace the complete set in the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a set of four\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Clean and Clear Plus 420 splits flow across four cartridges on a common manifold. Replacing all four at once keeps the pressure drop even so no single cartridge is doing more than its share, and it puts the filter back to its rated 420 sq ft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUltra or Xtreme Blue\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the Advanced Ultra grade. Pleatco also offers the same fit in its Xtreme Blue line, with antimicrobial protection in the media and a bandless design that Pleatco says lowers operating pressure and simplifies cleaning. Either one fits the CCP420; the Xtreme Blue set is listed separately.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48624930685140,"sku":"PLE-051-3011","price":300.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_545c28f6-b1a4-442d-b910-b3d38d1d0109.png?v=1788655115"},{"product_id":"go-kit32v-9-viton-whisperflo-pump-seal-kit","title":"SuperPro Viton Whisperflo Pump Seal Rebuild Kit, GO-KIT32V-9","description":"\u003cp\u003eThe SuperPro GO-KIT32V-9 is the Viton gasket and o-ring kit, Kit 32, for Purex Whisperflo and IntelliFlo pool pumps. It gathers the seal set for the pump into one package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy Viton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eViton is a more chemically resistant elastomer than standard rubber. On a salt pool, a heavily chlorinated pool or a system running ozone, seals live a harder life, and the Viton version of the kit is the one to reach for.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eO-rings and gaskets flatten and harden with heat and time. The result is a pump that weeps at the lid or the housing seam, or one that struggles to hold prime because it is drawing air past a seal instead of water. Once the pump is open, replacing the full set costs nothing extra in labor and avoids a second teardown a month later.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis kit applies to the Whisperflo family, including the WF and WFE models, and to IntelliFlo pumps. Confirm the model on your pump label before ordering.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48625710334164,"sku":"SPG-601-5033","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_42f36691-8246-474c-92a9-294dacbd946f.png?v=1788688861"},{"product_id":"magnus-18x33-oval-54-deep-above-ground-pool","title":"Trendium Magnus 18' x 33' Oval, 54 in. Deep Above Ground Pool, PMAGELL-YE183354RSRSRSB11-TS","description":"\u003cp\u003eThe Trendium Magnus is an 18 ft by 33 ft oval above ground pool with a 54 in. deep wall. It is built around a resin coated Pearl colored steel wall on a resin coated steel frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResin where it counts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe top ledge is 7 in. wide and molded from Synpro resin. The ledge caps are all resin as well, with rounded corners that cover the screw heads. The uprights are 5 in. resin coated steel. That mix puts resin on the surfaces that get touched and weathered while the steel does the structural work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSkimmer and return\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA stainless steel service panel is built into the wall, and the widemouth thru-wall skimmer and return fitting assembly connect there. Both are included with the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you still need\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe liner is a separate purchase, as is the pool equipment. Size the pump, filter and liner for an 18 by 33 oval with a 54 in. wall when you order them.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48625845305556,"sku":"AG-PP-2341","price":4201.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_21fcca42-a124-4850-b4a6-3007d82439e9.jpg?v=1788701475"},{"product_id":"w-ss-treads-049","title":"SuperPro 3-Step Pool Ladder with Stainless Steel Treads, LAD100SS","description":"\u003cp\u003eThe SuperPro LAD100SS is a three step pool ladder fitted with stainless steel treads. It is the straightforward answer for a pool that needs a solid, no nonsense way in and out of the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless treads\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTreads take the whole load of a swimmer climbing out, usually with wet feet and often in a hurry. Stainless steel does not flex or go brittle the way plastic treads can after a few seasons of sun and pool chemistry, and it keeps its footing surface intact.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA dimensioned drawing is included in the images on this page. Check it against the anchor sockets already set in your deck so the ladder lines up with what is there.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48625848811732,"sku":"SPG-35-0003","price":467.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ef2255d0-48b8-4e40-9de9-ec7e5dbd90a4.jpg?v=1788701564"},{"product_id":"pool-basket-ball-set-splash-and-shoot-with-stainless-steel-rim","title":"Dunn-Rite Splash and Shoot Adjustable Pool Basketball Set with Stainless Steel Rim, B600 STAINLESS","description":"\u003cp\u003eThe Splash and Shoot is Dunn-Rite free standing pool basketball set, built around a one piece 2 3\/8 inch powder coated aluminum post and an 18 inch vinyl coated stainless steel rim. This is the stainless rim version, part B600 STAINLESS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeight and reach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe post telescopes, so the rim can sit anywhere up to 53 inches above the deck in infinite increments. That range covers small children through adults without swapping parts, and the 20 inch overhang puts the hoop out over the water rather than over the coping.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe base\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe base is rotational molded, 40 inches wide by 24 inches deep by 10 inches tall, and holds 25 gallons of water. Filled, it weighs 200 lb, which is what keeps the post upright under a hard rebound. A brass anchor and tightening wedge lock the post into it.\u003c\/p\u003e\u003cp\u003eThe set includes the post, the reinforced 29 inch by 43 inch silkscreened backboard, the RIM375 stainless rim with its white all weather net, a color matching 9 inch ball and all stainless steel hardware. Some assembly is required. It is made in Indiana.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48625849663700,"sku":"DUN-90-0601","price":384.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_af548198-8629-4ef7-bb5a-78fafddfad47.jpg?v=1788701616"},{"product_id":"hi-flo-suction-fitting-gry","title":"SuperPro Gray Fiberglass Hi-Flo Suction Fitting Complete with 6\" Cover, Wall Fitting and Nut, 25215-001-000","description":"\u003cp\u003eThe Super-Pro 25215-001-000 is a gray fiberglass Hi-Flo suction fitting supplied complete. The 6 in. cover, the wall fitting and the nut all come together, so there is nothing else to source before the fitting can go in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you are buying\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the whole fitting rather than a replacement cover on its own. The body is fiberglass and the finish is gray. The nut holds the assembly through the pool wall, and the cover fastens on the pool side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart numbering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same fitting appears under two numbers, 25215-001-000 and 25215-001-000VGB. If a service company or a quote has given you either one, this listing is the part they mean.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48625852252372,"sku":"SPG-85-8802","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_98f97c7b-4ea3-4f67-9a2d-2ee22de556e7.jpg?v=1788701674"},{"product_id":"ips-controllers-blue-clear-complete-flow-cell-with-flow-switch-fc100g","title":"IPS Controllers Blue\/Clear Complete Flow Cell with Flow Switch, FC100G","description":"\u003cp\u003eThe IPS Controllers FC100G is the complete flow cell for Blue\/Clear systems, supplied with its flow switch already fitted. It is the assembly the controller reads through, and it is sold here as one kit rather than as a cell plus a list of small parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it is sold complete\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplacing a flow cell usually means replacing the plumbing around it as well. This kit includes all fittings, the valves and the grounding lug, so a cracked or fouled cell can be pulled out and a fresh one built back in during the same visit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe flow switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe switch is part of the cell. It proves water is actually moving past the sensing point, which is what keeps a controller from acting on a stale reading or feeding chemical into a dead line.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48626300780756,"sku":"ISI-451-1003","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_9a84cea8-e83e-4b82-a5d0-2b9aa17b9720.jpg?v=1788707892"},{"product_id":"super-pro-super120010-1-hp-120v-quiet-pool-spa-air-blower","title":"SuperPro 1 HP, 120V, Quiet Pool Spa Air Blower, SUPER120010","description":"\u003cp\u003eThe SuperPro SUPER120010 is a quiet pool and spa air blower rated at 1 HP and wired for 120V.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a blower does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe blower is the air half of a spa. The pump moves water through the jets, and the blower pushes air into the channel that feeds the bubbles. When a blower fails, the water still circulates but the spa goes flat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the horsepower and the voltage to the unit you are removing, and check how the old blower was mounted and plumbed so the replacement lands in the same place.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48626500796628,"sku":"SPG-85-0010","price":274.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f3262463-d349-4b57-babd-fb877af6d3c4.jpg?v=1788711015"},{"product_id":"super-pro-super120020-quiet-pool-spa-air-blower-2-hp-120v","title":"SuperPro Quiet Pool and Spa Air Blower, 2 HP, 120V, SUPER120020","description":"\u003cp\u003eThe SuperPro SUPER120020 is a quiet pool and spa air blower rated at 2 HP on 120 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a blower does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo separate things feed a spa. The pump handles water, and the blower handles air. Without the blower, jets push a plain stream of water, and the bubbling action people actually buy a spa for is missing. The same unit also feeds bubbler rings and air channels built into pool benches and tanning ledges.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA blower that hums but moves no air, that runs noticeably hotter or louder than it used to, or that trips its circuit is finished. Blowers live outdoors, breathe damp air and run under load, and they do not last as long as the pump beside them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 120 volt version. Electrical work belongs to a qualified electrician, done to local code with the circuit isolated, and the blower must be mounted and plumbed so water cannot run back into it.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48626595004628,"sku":"SPG-85-0016","price":320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-85-0016_1a.png?v=1788712850"},{"product_id":"go-kit82v-9-viton-jandy-shp-pump-seal-kit","title":"SuperPro Jandy SHPF and SHPM Series Viton Seal Kit, GOKIT82V-9","description":"\u003cp\u003eThis is SuperPro GOKIT82V-9, the Viton gasket and o-ring kit for Jandy Stealth pumps in the SHPF and SHPM series. SuperPro calls the set Go-Kit 82.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePump seals age together. When one o-ring has hardened and started to weep, the rest are usually the same age and the same condition. Buying the set means the pump goes back together with fresh seals throughout, instead of a mix of new and tired ones that has you back in the pump next season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eViton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the Viton version. Viton stands up to heat and pool chemistry better than standard rubber, which matters at an equipment pad that gets hot and sees chlorinated water day in and day out.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck that your pump is a Jandy Stealth in the SHPF or SHPM series. Jandy built several pump families with different seal sets, and the kits are not interchangeable between them.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48626725126356,"sku":"SPG-601-6095","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-601-6095-_1a.png?v=1788714057"},{"product_id":"safety-cover-installation-tool","title":"SuperPro Safety Cover Installation Tool","description":"\u003cp\u003eThis is the SuperPro safety cover installation tool, a stainless steel tool with a black handle, sold as a replacement for the install and removal tool supplied with Loop-Loc safety pool covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy a spare\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tool is small, it gets used twice a year, and it is exactly the sort of thing that disappears between the spring open and the fall close. Without it the cover job does not start, so a second one in the truck is cheap insurance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStainless steel with a black handle, which is what keeps it usable after seasons of sitting damp in a bag. Check your own cover hardware before ordering it for a brand other than Loop-Loc.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48626842829012,"sku":"SPG-701-505","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6cf908a1-7119-40ba-801a-18a984a81bbc.jpg?v=1788715772"},{"product_id":"superpro-1-hp-120-v-quiet-spa-blower-with-switch","title":"SuperPro 1 HP 120V Quiet Spa Blower with On\/Off Switch, SUPER120010SW","description":"\u003cp\u003eThe SuperPro SUPER120010SW is a 1 HP quiet spa blower on 120 volts, supplied with an on\/off switch. The brand appears as both SuperPro and Super-Pro on this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a blower does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump moves water; the blower moves air. It feeds the spa air channel so the jets break into bubbles, and it is the component responsible for that effect. A blower that has died leaves the jets flowing water with no aeration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis version includes its own on\/off switch, which is what the SW suffix in the part number marks. That makes it a straightforward choice on a spa without a dedicated blower control already wired in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne horsepower at 120 volts is the usual residential size. SuperPro also builds a 2 HP unit on 240 volts for larger spas, so match the horsepower and the voltage to what your spa is wired for before ordering.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48626964824276,"sku":"SPG-85-0203","price":266.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_703a7168-5c10-4ba9-8375-47d3d931e602.png?v=1788718562"},{"product_id":"super-pro-x15-ult-a6-m-xtreme-blue-a6-single-replacement-filter-cartridge-for-use-with-clean-clear-plus-420","title":"Pleatco Xtreme Blue A6 CCP420 Single Filter Cartridge, X15-ULT-A6-M","description":"\u003cp\u003eThe Pleatco X15-ULT-A6-M is an Xtreme Blue A6 replacement cartridge for Clean and Clear Plus 420 filters, sold as a single cartridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat makes it an Xtreme Blue\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe media is a point bonded fabric, which holds more dirt and debris than plain filter cloth, and it is treated so it carries antimicrobial protection against microorganisms that touch it. That treatment is why the media is blue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to rinse clean\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePurePleat construction keeps the pleats from bunching, which matters at cleaning time because bunched pleats trap dirt where water cannot reach. Inside, the Free Flow Core gives the element its strength and keeps water moving through it, which is what holds operating pressure down as the cartridge loads up.\u003c\/p\u003e\u003cp\u003eThis is one cartridge. Cartridge filters of this size run a set of elements together, so check how many your housing holds and order to match, and replace the whole set at once so they load evenly.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48627007619284,"sku":"SPG-051-2510","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2c8370a3-44b5-4428-9a17-77c77df5f7f5.png?v=1788719011"},{"product_id":"magnus-15-round-54-deep-above-ground-pool","title":"Trendium Magnus 15' Round, 54\" Deep Above Ground Pool, PMAGELL-1554RSRSRSB11-TS","description":"\u003cp\u003eThe Magnus is Trendium's 15 ft round above ground pool with a 54 inch wall. The wall itself is steel in a Pearl color with a resin coating applied over it, carried on 5 inch resin coated steel uprights and a resin coated steel frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe top ledge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 7 inch wide top ledge molded from Synpro resin runs the full circle. The ledge caps are all resin as well, and their rounded corners sit over the screws so the fasteners are out of sight and out of the way.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSkimmer and returns\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Magnus puts a stainless steel service panel in the wall where the skimmer and the return fitting connect. The widemouth thru wall skimmer and the return fitting assembly both ship with the pool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you still need\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe liner and the pool equipment are bought separately, so plan the pump, filter and liner alongside the pool itself.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48627240468692,"sku":"AG-PP-2315","price":1896.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_95a1372d-0a19-48ca-9e75-738a233fac18.jpg?v=1788720271"},{"product_id":"super-pro-go-kit77-9-jandy-jhp-pump-seal-kit","title":"SuperPro Jandy JHP Pump Seal Kit, GO-KIT77-9","description":"\u003cp\u003eThe Super-Pro GO-KIT77-9 is a seal kit for Jandy JHP series pool pumps. It is an aftermarket kit, an alternative to ordering the factory seal parts individually.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA shaft seal fails quietly at first: a drip between the pump body and the motor, worse when the pump is running, that dries between cycles so it is easy to miss. Left long enough, that water reaches the motor bearings and turns a small parts order into a motor replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal sits behind the impeller, so it is only reachable with the wet end apart. That makes it worth changing any time the pump is opened for other work, not only when it is already leaking.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48627404406996,"sku":"SPG-601-6100","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_efda38bd-7476-41db-90cb-882fb6b4c781.jpg?v=1788723082"},{"product_id":"brass-anchor-for-concrete-decks","title":"GLI Brass Anchor for Concrete Decks, 99-20-9100003","description":"\u003cp\u003eThis is the GLI 99-20-9100003 brass safety cover anchor, made to be set into a concrete pool deck. It is also listed under the SuperPro name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow the anchor works\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSafety cover anchors live in the deck permanently. The strap on the cover hooks into the anchor, tension is set with the installation tool, and at the end of the season the anchor screws down flush so nobody catches a foot on it. That means the anchor spends its whole life in wet concrete, which is why brass is the material used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck before you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the concrete deck version. A wood deck takes a different brass anchor assembly. The tools used to set anchors and tamp them into place are separate items.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48627626246356,"sku":"SPG-701-502","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0b8e03b9-05bc-4791-8048-d38b86649d6b.jpg?v=1788725518"},{"product_id":"viton-shaft-seal","title":"SuperPro Viton PS200 Shaft Seal, 200V-9","description":"\u003cp\u003eThe SuperPro 200V-9 is a Viton shaft seal built to the Seal 200 (PS-200) pattern, one of the most common shaft seal footprints in pool pumps. It is supplied as a set, with a rotating half and a polished seat already mounted in its cup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy Viton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe elastomer is what usually decides how long a shaft seal lasts. Viton holds up better against heat and aggressive water chemistry than a standard seal, so it is the sensible upgrade on a pump that has chewed through more than one seal, or one that runs hot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis seal is sized for a 5\/8 inch shaft. Pull the motor and measure the shaft rather than guessing, because the 200 series is produced in more than one shaft size and the wrong one will not seat.\u003c\/p\u003e\u003cp\u003eA shaft seal is the part that keeps water in the wet end and out of the motor. If water is tracking down the back of the pump while the lid and the unions stay dry, this is the part to change, and it is worth doing before the bearings take the damage.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48627715047636,"sku":"SPG-60-0202","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-60-0202.jpg?v=1788727045"},{"product_id":"2hp-240v-quiet-spa-blower","title":"SuperPro 2 HP 240V Quiet Spa Blower, SUPER240320","description":"\u003cp\u003eThe SuperPro SUPER240320 is a 2 HP quiet spa air blower running on 240 volts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa blower is separate from the pump. It pushes air into the spa air line, and that air is what turns a plain water jet into the bubbling action a spa is bought for. When the blower fails, the jets keep moving water but the bubbles stop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMatch the voltage. This is the 240 volt unit, and a spa wired for 120 volts needs a different blower. Confirm what is at the spa pack, then order by the part number, SUPER240320.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48627744866516,"sku":"SPG-85-0320","price":330.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-85-0320.png?v=1788727651"},{"product_id":"super-pro-super240310-quiet-pool-spa-air-blower-1-hp-240v","title":"SuperPro Quiet Pool Spa Air Blower, 1 HP, 240V, SUPER240310","description":"\u003cp\u003eThe SuperPro SUPER240310 is a quiet running air blower for pools and spas, rated 1 HP and wired for a 240 volt supply.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a blower does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA blower feeds air into the spa air channel or bubbler ring, which is what produces the rolling bubbles a jet pump on its own cannot make. Because it handles air rather than water, it is mounted at the pad and plumbed so water can never run back into the housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the right one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo things have to match: the horsepower and the voltage. This unit is 1 HP on 240V. If the blower you are replacing is 120 volt, or a different horsepower, it is the wrong part. Ordering by the SuperPro number SUPER240310 is the quickest way to be sure.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48627877642452,"sku":"SPG-85-0310","price":278.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-85-0310_1a.png?v=1788729522"},{"product_id":"suction-cover-w-frame","title":"SuperPro 12\" x 12\" Square White Anti-Vortex Main Drain Frame and Grate, SG6404720 V","description":"\u003cp\u003eThe SuperPro SG6404720 V is a 12 in. square white anti-vortex main drain frame and grate. The frame and the cover come together as a set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy anti-vortex\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater pulled through an open drain wants to swirl. An anti-vortex grate is shaped to break that pattern up as the water passes through, which is why the profile is the way it is rather than a flat plate with holes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and sizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure your existing opening before ordering. This is the 12 in. by 12 in. square format, and it will not stand in for a round cover or a different square size. A main drain cover that is cracked, warped or missing should be replaced before the pool is used again, not patched.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48627948421332,"sku":"SPG-25-8008","price":103.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f097fcda-23e3-4040-8521-91a4425150cf.jpg?v=1788730618"},{"product_id":"hayward-matrix-pump-seal-kit","title":"SuperPro Pump Seal Kit Compatible with Hayward® Matrix, GO-KIT74","description":"\u003cp\u003eThe SuperPro GO-KIT74 is the seal and gasket kit for Hayward® Matrix above ground pool pumps. It gathers the four seals a Matrix needs for a motor swap or a rebuild into one part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit contains the AS-200 mechanical shaft seal, the O-4 strainer o-ring, the O-368 housing o-ring and the O-453 lid o-ring. Between them, those four cover the pump from the lid down to the shaft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buy the kit rather than one seal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe shaft seal is not reusable once the motor has been pulled, and an o-ring that has spent a few seasons compressed and baked does not reseat cleanly on reassembly. Fitting the pump back together with old rings is how a rebuild turns into a second teardown a week later. Everything comes apart at once, so everything goes back with new seals.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48628757528788,"sku":"SPG-601-6097","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_d14aabfa-b5aa-4590-a571-129aed02a5e4.jpg?v=1788749795"},{"product_id":"seal-plate-booster-pump","title":"SuperPro Seal Plate, Booster Pump, 311-8300","description":"\u003cp\u003eThe SuperPro 311-8300 is a replacement seal plate for the Waterway booster pump, the pump that supplies pressure to a pressure side pool cleaner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the seal plate does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe seal plate closes off the wet end and bolts to the motor, and the shaft seal rides in the bore at its center. Everything about whether the pump stays dry depends on that bore being round, smooth and undamaged. A plate that has cracked, warped from running dry, or worn where the seal sits will keep leaking however many new seals go into it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering and fitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a SuperPro aftermarket part, not a Waterway factory one, so match 311-8300 to your parts list rather than judging by appearance. Booster pump plates from different manufacturers look similar and are not interchangeable. Since the motor has to come off the wet end anyway, inspect the shaft, the bolt pattern and the seal faces at the same time.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48628797931732,"sku":"SPG-101-8301","price":143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-101-8301_1a.png?v=1788750825"},{"product_id":"volute-o-ring-268","title":"SuperPro Volute O-Ring #268, 805-0268","description":"\u003cp\u003eThe SuperPro 805-0268 is the #268 volute housing o-ring for the Waterway booster pump. It seals the joint between the volute and the pump body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat goes wrong\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe volute o-ring is squeezed flat every time the housing is bolted down, and heat plus pool chemistry hardens it over the years. A tired o-ring first shows as a weep along the seam, then as a pump that will not hold prime because it is drawing air on the suction side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to fit one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFit a new o-ring any time the volute comes apart, whether you are chasing a leak or replacing the seal or impeller behind it. Clean the groove, seat the ring dry and even, then draw the housing down evenly.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48628813856980,"sku":"SPG-101-0268","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0ab39eb3-690c-42b4-bf52-5ec906328900.jpg?v=1788752311"},{"product_id":"jandy-flopro-fhp-series-pump-repair-kit","title":"SuperPro Jandy FloPro FHP Series Pump Repair Kit, GO-KIT88V-9","description":"\u003cp\u003eThe SuperPro GO-KIT88V-9 is a pump repair kit for the Jandy FloPro FHP series. It gathers the service pieces for that pump family under one part number so a rebuild takes one order rather than several.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAftermarket, not Jandy branded\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSuperPro builds this kit as an aftermarket alternative to buying the pieces individually. It is sold for the FloPro FHP series, so read the model off the pump label before ordering, since Jandy has used the FloPro name across more than one pump line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur data for this kit does not list the individual contents. If you need a particular seal, gasket or hardware piece confirmed, check GO-KIT88V-9 against the FHP parts list or contact us first. The FloPro backplate kit, the lid o-ring, the pump basket and the housing body are separate parts, and a pump that is already apart is the right time to look at all of them.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48628815888596,"sku":"SPG-601-6110","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_47de383e-e64e-483a-b952-f3418930c4cd.png?v=1788752383"},{"product_id":"super-pro-25098-000-000-1-s-white-air-control-assembly-for-gunite-fiberglass-spa","title":"SuperPro 1\" S White Air Control Assembly for Gunite\/Fiberglass Spa, 25098-000-000","description":"\u003cp\u003eThe SuperPro 25098-000-000 is a 1 in. S air control assembly in white, for gunite and fiberglass spas. It is the control that sets how much air goes into the jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it changes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpa jets mix air into the water stream. Open the air control and more air is drawn in, which makes the jets feel sharper and run louder. Close it down and the jets go smoother and quieter, and the water holds its heat better because less cool air is being pulled through it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir controls sit in the deck and get handled constantly. Over time the internals stiffen up, the knob loses its travel or the assembly starts weeping around the body. When that happens the whole assembly is replaced rather than repaired. Confirm your existing control is the 1 in. S size before ordering.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48628828209364,"sku":"SPG-85-0050","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_94afc52f-d848-4fde-bb65-56cb72bad079.jpg?v=1788753413"},{"product_id":"super-pro-go-kit54-9-sta-rite-p2r-pump-seal-kit-after-1997","title":"SuperPro Sta-Rite P2R Pump Seal Kit after 1997, GO-KIT54-9","description":"\u003cp\u003eThe SuperPro GO-KIT54-9 is the seal kit for Sta-Rite P2R pumps built after 1997. It carries the seal parts that come out as a set when the pump is opened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater on the pad under the join between the wet end and the motor is the classic failed shaft seal. The seal is what keeps pumped water on the pump side of the shaft, and once it goes, the leak runs straight down onto the motor. That is why a drip is worth acting on quickly: a seal kit is cheap and a replacement motor is not.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the date first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSta-Rite revised the P2R over its production life. This kit is for the pumps built after 1997, so confirm which side of that line your pump falls on before ordering. If the pump needs more than seals, a full overhaul kit covers a wider set of parts.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48628828242132,"sku":"SPG-601-1408","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_80ed4477-89cb-46a9-9aab-3efdbf3687e3.jpg?v=1788753418"},{"product_id":"pleatco-x15-ult-a5-m-q4-xtreme-blue-a5-replacement-filter-cartridge-4-per-pack-for-use-with-clean-clear-plus-320","title":"SuperPro Xtreme Blue A5 Replacement Filter Cartridge 4 Per Pack, for Clean \u0026 Clear Plus 320, X15-ULT-A5-M-Q4","description":"\u003cp\u003eThis is a four pack of Xtreme Blue A5 replacement filter cartridges for the Clean and Clear Plus 320 cartridge filter, part number X15-ULT-A5-M-Q4.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the four pack\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Clean and Clear Plus 320 runs a set of cartridges rather than a single element. Buying the set means the whole tank goes back together with cartridges of the same age, which is the point: a filter shares its work evenly only when every element has the same amount of life left. Drop one new cartridge into three old ones and the new one takes the brunt.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKnowing when to replace\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCleaning a cartridge buys back most of its capacity, right up until it does not. Once a thorough clean no longer returns the filter gauge to its clean starting pressure, or the pleats are matted, torn or permanently stained, the element is done and no amount of soaking will bring it back.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48628848918740,"sku":"SPG-051-2509","price":346.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0b738b1d-be3c-44af-b5db-4c5d674ede8e.jpg?v=1788755262"},{"product_id":"basketball-combo-unit-with-stainless-steel-rim","title":"Dunn-Rite Basketball Combo Unit with Stainless Steel Rim, BV700 STAINLESS","description":"\u003cp\u003eThe Dunn-Rite Pool Sport Stainless Combo is a 2 in 1 poolside set that covers both basketball and volleyball from a single pair of stands. It arrives with a 22 inch by 31 inch poly backboard, a 13.5 inch vinyl coated stainless steel rim fixed at 36 inches above the deck, a 7 3\/4 inch color matched basketball, a hot pink volleyball and a 16 foot volleyball net.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe stands\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth stands are heavy duty polyethylene and are filled with water on site, ending up at 115 lbs each. That weight is what keeps the set steady in play, and it is also why the units ship empty and are set up where they are going to live rather than moved around full.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRim and backboard\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe rim is vinyl coated stainless steel, which is the point of this version: pool decks are hard on plain steel, and the coating over stainless is what keeps a rim looking right after a few seasons of chlorine and sun. Rim height is fixed at 36 inches above the deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe set carries a 3 year warranty from Dunn-Rite.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48629106278612,"sku":"DUN-90-0701","price":356.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/DUN-90-0701_1a.png?v=1788759755"},{"product_id":"deck-mount-049","title":"SuperPro 48 Inch Classic 4-Bend Handrail, Deck Mount, RAIL4B","description":"\u003cp\u003eThe SuperPro RAIL4B is the 48 inch Classic handrail in the 4-bend deck mount style, built with .049 wall tubing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe 4-bend shape\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFour bends take the tube up from the deck, out over the pool edge, across and back down into the second anchor. It is the standard grab rail profile at the top of pool steps, giving something to hold while entering and leaving the water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a deck mount rail. It sets into anchor sockets fixed in the deck, and those anchors, wedges and escutcheons are separate items from the rail itself. Before ordering, measure the distance between your existing sockets. A rail with the wrong bend spacing will not drop in, and moving deck anchors is a much larger job than changing a rail.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48629278343380,"sku":"SPG-35-0004","price":278.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2d4eefc2-6ef5-4204-8eee-41ae4879e4c1.jpg?v=1788761850"},{"product_id":"superpro-sp0801-20h2-2-cpvc-check-valve","title":"SuperPro 2\" CPVC Check Valve, SP0801-20H2 (CR)","description":"\u003cp\u003eThe SuperPro SP0801-20H2 is a 2 inch CPVC check valve with slip connections on both ends and a 1\/2 lb corrosion resistant spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the CPVC body matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCPVC tolerates higher water temperature than standard PVC, which is what makes this valve suitable for the hot side of a system rather than only cold return lines. If the valve you are replacing sits anywhere the water runs warm, a CPVC body is the right choice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe spring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 1\/2 lb spring is on the light side by design, so the valve opens with very little head pressure and costs you almost nothing in flow. The spring is also the part of any check valve most likely to give out in treated pool water, and this one is built to resist corrosion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth ends are 2 inch slip, so the valve solvent welds straight into a run of 2 inch pipe. Note the flow direction marked on the body before you glue it in, because a check valve installed backwards will block the line.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48633447842004,"sku":"SPG-56-1820","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-56-1820_1a.png?v=1788801864"},{"product_id":"3-4-blue-white-safety-pool-rope-per-foot","title":"SuperPro 3\/4\" Blue\/White Safety Pool Rope, Per Foot, 10352","description":"\u003cp\u003eSuperPro 10352 is twisted poly safety rope in the blue and white pattern, 3\/4 inch in diameter, sold by the foot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe quantity you enter is the number of feet you want, up to 300 feet, and the rope comes as one continuous length. Measure the span you are crossing, then add enough on each end for the hardware and the knots.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the rope is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSafety rope marks the point where a pool floor drops away, closes off an area to swimmers, or divides a swim area from a play area. Polypropylene is the right material for it because it floats and holds up in chlorinated water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe rest of the run\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA finished safety line also needs floats sized for 3\/4 inch rope and anchoring hardware at each wall. Those are ordered separately.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48633703432404,"sku":"SPG-42-2000","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0865af95-539f-4235-855d-1498ffee18f6.jpg?v=1788812072"},{"product_id":"blue-square-502002-abyss-debris-canister-lid","title":"Blue Square Manufacturing Abyss Debris Canister Lid, 502002","description":"\u003cp\u003eThis is the Blue Square Manufacturing 502002, the replacement lid for the Abyss debris canister.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLid only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe listing covers the lid itself. The canister body and the basket that sits inside it are separate parts, so confirm which piece has failed before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy lids fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA debris canister lid lives in the deck, in full sun, and gets walked on. Over enough seasons the plastic takes on brittleness, and lids crack around the edge or stop seating flat. A lid that no longer seats is worth replacing rather than working around, because grit finds its way past and ends up somewhere less convenient.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48633715130580,"sku":"BSM-201-1015","price":141.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a40d58ca-e14a-41be-92bb-0e1b203c280d.png?v=1788812430"},{"product_id":"slim-spa-air-control","title":"SuperPro 1\/2\" S White Slim Gunite Spa Air Control Assembly, 25099-000-000","description":"\u003cp\u003eThe SuperPro 25099-000-000 is a slim gunite spa air control assembly in white, with a 1\/2\" S connection. It is the control that lets a bather open or close the air line feeding the jets.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlim versus standard\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir controls come in more than one body depth. This is the slim gunite version, so it suits installations where the standard body sits too proud of the deck. Ordering by the part number 25099-000-000 is the reliable way to get the right one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir controls take a hard life. They sit in wet deck surrounds, they get turned with wet hands, and eventually the stem seizes or the seal passes water. Once an air control will not turn cleanly or will not shut the air off, the bather loses any control over how hard the jets run, and the whole assembly is the sensible fix.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48633766543572,"sku":"SPG-85-0051","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2b4785f5-1b3b-4f6d-b9bc-5d6c8aa284d1.jpg?v=1788814831"},{"product_id":"split-nut-w-screws","title":"SuperPro 2\" Pump Repair Split Nut with Screws, SP0121109020","description":"\u003cp\u003eThe SuperPro SP0121109020 is a 2 inch split nut supplied with its screws, sold as a pool pump union repair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe problem it solves\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA union nut at the pump is a single piece that slid on over the pipe when the system was plumbed. When it cracks, strips or gets cross threaded, replacing it normally means cutting the pipe to get the old nut off and a new one on. That is a glue joint, a cure time and a shorter pipe stub to work with next time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow a split nut fixes it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis nut comes apart in two halves that go around the fitting and are drawn together by the supplied screws. Nothing has to slide over the pipe end, so the failed nut can be replaced with the plumbing left as it is. Match the size, which for this part is 2 inch, since the 1-1\/2 inch versions are separate parts.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48633998999764,"sku":"SPG-56-4401","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/super-pro-sp0121109020-2-pump-repair-split-nut-w-screws.jpg?v=1788823569"},{"product_id":"plug-with-o-ring-1-5-sp1022c-6pack","title":"SuperPro 1.5\" Threaded Winterizing Plug with O-Ring, SP1022C Style, 6 Pack, 25543-000-000","description":"\u003cp\u003eThis is a six pack of 1-1\/2 inch threaded winterizing plugs, each supplied with an o-ring. They thread into standard pool and spa return jets to seal the lines for the off season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere they fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe plugs use a 1-1\/2 inch male thread and suit most standard return jet fittings on both above ground and in ground pools, including fittings from the major equipment brands. The same plug also replaces the SP1022C style filter drain plug, which makes the spares useful year round.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eClosing the pool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe material is chosen to take extreme cold without shrinking or slipping, which is exactly when a winter plug has to hold. The o-ring is what seals, not thread interference, so run each plug in hand tight and then a small turn. Six plugs covers the returns on most residential pools with a spare or two left for the filter.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634168475860,"sku":"SPG-25-0141-6pack","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_83fd982c-7777-4e93-a5bb-6900027afa6b.png?v=1788826126"},{"product_id":"diverter-valve-cover-oring-o-440-9","title":"SuperPro Diverter Valve Cover O-Ring, O-440-9","description":"\u003cp\u003eThe SuperPro O-440-9 is a replacement cover o-ring for diverter valves. It is listed as the cover seal for American 2 and 3 directional port valves, and also for Compool and Pac Fab port valve covers, the Polaris back up valve, Jandy valve covers and backwash valve covers and lids, and Waterway serviceable check valve and TruSeal covers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCover seal, not diverter seal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the o-ring that sits between the valve body and the cover you unscrew to get at the diverter. It is a different part from the seals on the diverter itself, so if the valve is passing water between ports rather than leaking to the outside, this is not the part you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom it fixes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater weeping out from under the valve cover. Once an o-ring hardens or takes a permanent set in its groove, no amount of tightening will stop the leak. Clean the groove and the mating face, fit the new o-ring with a thin film of silicone based lubricant, and tighten the cover down evenly.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634260881620,"sku":"SPG-601-1273","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_18f7e3ac-5f13-4a31-9c9b-071b10154333.jpg?v=1788827860"},{"product_id":"50mfd-370v-round-run-capacitor","title":"SuperPro 50 MFD 370V Round Run Capacitor, 12725","description":"\u003cp\u003eThe SuperPro 12725 is a round run capacitor rated 50 MFD at 370 volts. It is the replacement for a pool pump motor that uses a capacitor of that value.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a run capacitor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSingle phase motors need a phase shifted current to get turning and to keep turning efficiently. The run capacitor provides it, and unlike a start capacitor it stays in the circuit the whole time the motor is running. When it weakens or fails, the motor draws more current, runs hot, or sits there humming without turning at all.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGo by the rating printed on the capacitor you are removing, not by the pump model. This one is 50 MFD at 370V in a round can. If yours reads a different capacitance, or is oval rather than round, it is a different part. Capacitors hold a charge after power is off, so discharge the old one before handling it.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634470858964,"sku":"SPG-101-2725","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/super-pro-12725-50mfd-370v-round-run-capacitor.jpg?v=1788831642"},{"product_id":"m-d-av-8-frame-grate-gry","title":"SuperPro 8\" Round Gray Anti-Vortex Main Drain Frame and Grate, SG6402317 VC","description":"\u003cp\u003eThis is the SuperPro 8 inch round anti-vortex main drain frame and grate in gray, supplied as both pieces together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe frame is the ring that sits in the drain sump, and the grate is the cover that screws down into it. Buying the pair is the simple route when the old grate is cracked or missing and the frame around it has taken damage too, because a grate that will not sit flat and hold its screws is not a repair worth making twice.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the size and shape of the existing drain before you order. This is the 8 inch round pattern, and square drains and larger round drains use different covers. The gray finish is the match for gray plaster and darker pebble interiors, and the same frame and grate is listed in white for lighter finishes.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634472366292,"sku":"SPG-25-8002","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ab3535da-71b6-48ea-b7fa-42cf7118bdeb.jpg?v=1788831800"},{"product_id":"round-run-capacitor","title":"SuperPro 30 MFD 370V Round Run Capacitor, 12717","description":"\u003cp\u003eThe SuperPro 12717 is a round run capacitor rated 30 MFD at 370V, sized for pool equipment motors that use a capacitor of that rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a run capacitor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSingle phase motors need a phase shift to keep torque smooth once they are turning. The run capacitor provides it, and it stays in circuit the whole time the motor runs. That constant duty is why run capacitors age out, and why a motor that has served for years can suddenly hum, draw current and refuse to come up to speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCapacitance has to match the original, in this case 30 MFD. The voltage rating must be at least as high as the original, and the can shape has to suit the housing or strap on your motor, which is why round and oval versions of the same rating both exist.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKill the power at the breaker and discharge the capacitor before disconnecting anything. A capacitor holds its charge after the supply is off, and that stored energy is enough to hurt.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634490749140,"sku":"SPG-101-2717","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/super-pro-12717-30mfd-370v-round-run-capacitor.jpg?v=1788832569"},{"product_id":"super-pro-o-523kit-9-hayward-psv-valve-key-cover-o-ring-kit-psxvz2a","title":"Super-Pro PSV Valve Key and Cover O-Ring Kit for Hayward® PSXVZ2A, O-523KIT-9","description":"\u003cp\u003eThe Super-Pro O-523KIT-9 is an o-ring kit for the key and cover of a Hayward® PSV valve, compatible with Hayward® part PSXVZ2A. It supplies the rubber that seals the valve, which is the part of the assembly that wears out while the body itself stays serviceable for years.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen you need it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA PSV valve has two places that give trouble. Water can weep out from under the cover, or it can seep around the stem where the handle passes through. Both are seal problems, and both are cured by new o-rings rather than by a whole new valve. If the handle has also become stiff and drags as you turn it, that is the same hardened rubber gripping the key.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting notes\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReplace both the key and the cover seals while the valve is open, since the labor is the same and the second ring is the same age as the first. Lubricate the new o-rings with a silicone based o-ring lube. Petroleum greases swell this kind of rubber and will put you back into the valve sooner than you would like.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634543866068,"sku":"SPG-561-0523","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-561-0523_1a.png?v=1788834093"},{"product_id":"white-dir-spa-master-int","title":"SuperPro Spa Master Scalloped Directional Jet Internal with 3.5\" Flange, White, 25591-210-000","description":"\u003cp\u003eThe SuperPro 25591-210-000 is the Spa Master scalloped directional jet internal with a 3.5 inch flange, in white. It is the insert, not a complete jet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInternal versus body\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe jet body is the part plumbed into the shell and it stays put. The internal is what drops into it and what you see, and it is the piece that gets scaled, discolored or cracked. Replacing internals is how a tired spa is brought back to looking new without touching the plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatch three things\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFlange size, face style and color. This is the 3.5 inch flange, the scalloped face and white. Pull the old internal and hold it against those three before ordering, because a mismatched flange leaves a ring of stained shell showing around the new trim.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBeing a directional internal, the stream can be aimed rather than firing straight out from the wall. The same Spa Master scalloped directional internal is offered in gray under a separate part number if white is not your trim.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634617921748,"sku":"SPG-85-2021","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/super-pro-25591-210-000-sm35in-gnt-jetdir-adj-scpnon-texwh.jpg?v=1788835499"},{"product_id":"super-pro-sg640-2310vc-8-round-white-anti-vortex-main-drain-frame-grate","title":"SuperPro 8\" Round White Anti-Vortex Main Drain Frame and Grate, SG640-2310VC","description":"\u003cp\u003eThe SuperPro SG640-2310VC is an 8 inch round anti-vortex main drain frame and grate in white. Both pieces are included, so the whole assembly at the floor of the pool gets renewed rather than just the visible grate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMain drain grates spend years underwater under constant flow and eventually go brittle, crack or lose a screw boss. A grate that is cracked, loose or missing is not something to leave for next season, and because the frame ages alongside it, replacing both at once is the sensible way to do it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck before you fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the opening and compare the pattern against what you are removing. Main drain covers are safety hardware, and requirements differ by installation and by where the pool is, so confirm what your pool is required to use before fitting any cover.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634627129556,"sku":"SPG-25-8000","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8226ed2d-a7c9-4b60-bee3-45960d9da222.jpg?v=1788835563"},{"product_id":"stabilizer-1-75-lbs-bottle-for-swimming-pools","title":"Regal Stabilizer 1.75 lbs Bottle for Swimming Pools, 12001589","description":"\u003cp\u003eRegal Chemicals 12001589 is a 1.75 lb bottle of pool stabilizer, and the bottle holds 100 percent cyanuric acid with nothing else blended in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy chlorine needs it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSunlight breaks down free chlorine in an outdoor pool faster than anything else does. Cyanuric acid shields it, prolonging the effective life of the chlorine already in the water. The practical result is that you feed less sanitizer across the season and hold a reading longer between doses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDosing sense\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStabilizer is also sold as conditioner, so if you are already adding a product under that name you are adding this chemistry twice. Cyanuric acid does not burn off or evaporate the way chlorine does, it leaves mainly through dilution, so test the level before you pour and add only what the reading asks for.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634724253908,"sku":"RGL-50-2102","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/RGL-50-2102_1a.png?v=1788836637"},{"product_id":"aladdin-b-219-pool-pump-basket-replaces-pentair-challenger-355318-or-r38024-b219","title":"SuperPro Pool Pump Basket Replaces Pentair Challenger 355318 or R38024, B219","description":"\u003cp\u003eThe SuperPro B-219 is a pool pump strainer basket sold as the replacement for the Pentair Challenger baskets 355318 and R38024. It is an aftermarket basket built to the same shape as the factory part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the basket does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe strainer basket is the last screen before the impeller. Leaves and grit that got past the skimmer collect here, and anything that slips through goes into the wet end of the pump. A basket that has cracked, collapsed or lost part of its rim stops doing that job while still looking like it is in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting and flow\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChanging it takes no tools. Turn the pump off, open the strainer pot, lift the old basket out and set this one in. It is worth checking the pot lid o-ring at the same time, since a pump that has been running against a damaged basket is often also drawing air past a tired lid seal.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634765508820,"sku":"SPG-601-0222","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-601-0222_1a.png?v=1788836746"},{"product_id":"white-cycolac-escutcheon","title":"SuperPro White Cycolac Escutcheon, 25572-000-000","description":"\u003cp\u003eThe SuperPro white Cycolac escutcheon is the cover plate that finishes the point where a rail or ladder tube enters its deck anchor. It carries two part numbers, 25572-000-000 and PE0019W, and both refer to this same part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA deck anchor is set into the concrete and the rail drops into it. The escutcheon slides down the tube and covers the anchor and the gap around it, which keeps the finished job looking deliberate instead of unfinished. Molded in Cycolac, a tough ABS grade, it stands up to a wet deck better than thin painted metal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inside diameter is 1.9 inches, the common tube size for pool rails and ladders. Measure the outside of your tube first, because a plate that is close but not correct will either rattle or refuse to sit down. It is supplied on its own, without an anchor or wedge.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634805944532,"sku":"SPG-PE0019W","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a28ff17d-e7be-4504-b821-3f5a4307cc8e.jpg?v=1788837703"},{"product_id":"cmp-27180-215-000-sta-rite-pump-basket-c-8-58-p","title":"Super-Pro Sta-Rite Pump Basket C8-58P, 27180-215-000","description":"\u003cp\u003eThe Super-Pro 27180-215-000 is a replacement pump strainer basket for Sta-Rite pumps, sold under the model references B-215 and C8-58P. It is molded in plastic and drops into the strainer pot in place of the original.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it fits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket is listed for Sta-Rite IntelliPro, Max-E-Pro and Dura-Glas pumps. If you are not certain which pump is on your pad, compare the old basket to the one in the listing before ordering, since baskets of similar height often differ at the rim and will not seat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe strainer basket is the last filter before the impeller. Everything the skimmer misses, leaves, hair, twigs and grit, ends up here. Once a basket cracks or its rim splits, that debris passes straight through and reaches the impeller and the shaft seal. Replacing a basket is a few minutes and a small part. Clearing a packed impeller or replacing a seal is neither.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48634914898132,"sku":"SPG-601-0221","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/SPG-601-0221_1a.png?v=1788838803"},{"product_id":"superpro-sp0121108020-split-nut-w-screws","title":"SuperPro 2\" Split Nut with Screws for Heater Repair, SP0121108020","description":"\u003cp\u003eSuperPro SP0121108020 is a two inch split nut supplied with its screws, sold as a heater repair part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy a split nut\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnion nuts crack. On a heater that has been overtightened, or on old plastic that has spent years in the sun, the nut is usually the first thing to give. A standard replacement nut has to slide over the end of the pipe, which on an installed heater often means cutting the plumbing apart to get it on. A split nut is made in two halves instead: it closes around the pipe where it sits and the supplied screws pull it together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the pipe and the union o-ring seat before the nut goes on, then draw the halves together evenly with the screws. Tighten the union itself by hand once the nut is assembled. Unions seal on the o-ring, and reaching for a wrench is what breaks the next one.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48635034370260,"sku":"SPG-151-5679","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ae0abe75-1ab7-4133-84d6-b43b7b482892.jpg?v=1788839952"},{"product_id":"male-ladder-bumper","title":"CMP Male Ladder Bumper for 1.9\" O.D. Ladders and Rails, White, 25562-500-000","description":"\u003cp\u003eThe CMP 25562-500-000 is a male ladder bumper in white, sized for the 1.9 inch outside diameter tube used on most pool ladders and handrails.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLadder and rail tubes come down close to the pool wall. The bumper is the soft standoff between the two. Lose it and the bare tube sits against the finish, where the constant small movement of people climbing in and out grinds a permanent mark into plaster or tile, or wears a liner through.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMale versus female\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the male style, which pushes into the open end of the tube. Bumpers are also made in a female pattern that slips over the outside of the tube instead, so look at how the old one was fitted before ordering. The dimensions on record for this item are width 2.10, height 1.40 and depth 2.15.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48635038662868,"sku":"SPG-351-2002","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a7ad0888-c31c-4077-9bc5-c8584c411c18.jpg?v=1788840304"},{"product_id":"a-o-smith-motor-capacitor-161-192-mfd-610807-002","title":"SuperPro 125V Start Capacitor, 161\/192 MFD, 11914","description":"\u003cp\u003eThe SuperPro 11914 is a start capacitor rated 161\/192 MFD at 125V. It is cross referenced to the A.O. Smith motor capacitor 610807-002 used on pool pump motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a start capacitor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single phase motor cannot start on its own. The start capacitor gives the extra push that breaks the rotor away and brings it up to speed, then drops out of the circuit. When it weakens, the motor still has power but no longer has the torque to start, which is why a failing capacitor so often looks like a failed motor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRead the printing on the capacitor you are removing and match the MFD and the voltage. A motor family can be built with more than one rating, and our data for this part gives the range slightly differently in two places, as 161\/192 MFD and as 161 to 193 MFD. Discharge the old capacitor before handling it.\u003c\/p\u003e","brand":"SuperPro","offers":[{"title":"Default Title","offer_id":48641950515412,"sku":"SPG-101-1914","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/super-pro-11914-161-193mfd-125v-start-capacitor.jpg?v=1788899832"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/superpro.oembed?page=3","provider":"Active Pool Supply","version":"1.0","type":"link"}