{"title":"Swimables","description":"\u003cp\u003eSwimables pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"generic-whisperflo-style-pump-wet-end-0-5-hp-2-hp-with-high-temp-unions","title":"Swimables Generic WhisperFlo Style Pump Wet End, 0.5 to 2 HP, with High Temp Unions","description":"\u003cp\u003eThe Swimables SW-21-149 is an aftermarket wet end built in the WhisperFlo style for pumps from 0.5 to 2 HP. It ships with high temperature unions, so it connects to existing plumbing without hunting for separate fittings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace the wet end\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen a WhisperFlo housing cracks, the seal plate is scored, or the volute has worn past the point of a seal and impeller job, a new wet end brings the pump back while reusing a motor that still has life in it. That is far cheaper than a complete pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a generic, not a Pentair part. It covers 0.5 through 2 HP; 3 HP motors need the larger Swimables wet end. No motor is included.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48625021419732,"sku":"SDC-101-1000","price":336.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fd24596e-4249-49fd-b1a6-70604b46caaa.jpg?v=1788662459"},{"product_id":"generic-whisperflo-intelliflo-style-pump-wet-end-3-hp-with-high-temp-unions","title":"Swimables Generic Whisperflo IntelliFlo Style Pump Wet End, 3 HP with High Temp Unions","description":"\u003cp\u003eThe Swimables SW-21-150 is a 3 HP pump wet end built in the Whisperflo and IntelliFlo style, supplied with high temperature unions. It is a generic aftermarket assembly, not a Pentair factory part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a wet end is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wet end is everything on the water side of the pump: the volute housing, the basket area and the plumbing connections. The motor is separate. When a housing cracks, warps from heat, or has had one repair too many, replacing the wet end and moving the good motor across is usually the cheaper half of the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing and unions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 3 horsepower size. Swimables lists a smaller wet end covering 0.5 HP through 2 HP as its own item, so match the size to the motor you are keeping. High temp unions are included, which saves sourcing them separately.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48627628343508,"sku":"SDC-101-1001","price":337.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f4ec783f-5636-4f34-a53a-619b361740f9.jpg?v=1788725562"},{"product_id":"generic-sw-41-024-stack-flue-sensor-for-mastertemp-max-e-therm-heater","title":"Swimables Generic Stack Flue Sensor for MasterTemp and Max-E-Therm Heaters","description":"\u003cp\u003eThe Swimables SW-41-024 is an aftermarket stack flue sensor for MasterTemp and Max-E-Therm pool heaters. It replaces the original stack sensor in the same position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the stack sensor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe stack sensor sits in the exhaust path and reports flue temperature back to the heater control board. That reading is a safety input. If the exhaust runs hotter than the heater is designed for, the board shuts things down before damage happens. A sensor that has failed sends a reading the board will not accept, and the heater locks out even though nothing else is wrong.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAftermarket, not factory\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a Swimables part rather than the manufacturer sensor. It is the lower cost route to the same repair. The genuine sensor is available separately if you would rather stay with the factory component.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the connector and wiring first, since a corroded or loose plug produces the same fault as a dead sensor. This listing covers the stack flue sensor alone. Thermistors, high limit switches and control boards for these heaters are separate parts.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48627691126996,"sku":"SDC-151-0005","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e423c237-ee1d-4fa5-916b-db128e13c95e.jpg?v=1788726679"},{"product_id":"swimable-sw-97-024-valve-actuator","title":"Swimables 3-Port 24V Valve Actuator","description":"\u003cp\u003eThe Swimables SW-97-024 is a 24 volt valve actuator for 3-port pool valves, listed as a substitute for PE24VA, GVA-24 and 263045.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat an actuator does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA valve actuator is the motor that turns a diverter valve on command from your automation controller. It is what makes spa mode, solar and water features work without anyone walking out to the equipment pad to turn a handle. The controller sends 24 volts, the actuator drives the valve to the position it was set to, and a cam inside stops it there.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your valve is a 3-port and check the rotation it needs, since actuators are set up for a particular travel. Isolate power before working at the pad. When the new unit is on, run the valve through its full travel from the controller and watch that it stops where it should at both ends, then check the cover seals down properly. Water in the housing is what kills most actuators.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48633709101268,"sku":"SDC-31-1000","price":150.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e87aafb9-3155-43f6-8653-0185f67a8d8a.jpg?v=1788812247"},{"product_id":"swimables-sw-26-020-multiport-valve-handle-replacement-for-pentair-filter","title":"Swimables Multiport Valve Handle Replacement for Pentair Filters","description":"\u003cp\u003eThe Swimables SW-26-020 is a replacement multiport valve handle for Pentair filter valves. It takes the place of Pentair part 272520 and fits valve models 262504, 262505, 262506, 261049, 261050 and 261142.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy handles fail first\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe handle is the one part of a multiport valve that sees real force every time you backwash. Sun, chlorine and a decade of leverage make the plastic brittle, and it usually breaks at the pivot or strips where it grips the stem. The valve underneath is normally fine, which is what makes a handle worth replacing rather than the whole assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the model number cast into your valve against the list above. Note that this is an aftermarket Swimables part rather than a Pentair one, and it is supplied as the handle only, so the spider gasket, diverter and valve body are ordered separately if those are what is worn.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48633977340116,"sku":"SDC-061-0000","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_c3fb016d-07a7-43d8-89e2-f1fee38c5e04.jpg?v=1788823133"},{"product_id":"generic-sw-41-053-thermistor-for-mastertemp-max-e-therm-heater","title":"Swimables Generic Thermistor for MasterTemp Max-E-Therm Heater","description":"\u003cp\u003eThe Swimables SW-41-053 is a generic thermistor for MasterTemp and Max-E-Therm pool heaters. It is an aftermarket replacement, not the original manufacturer sensor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a thermistor does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA thermistor is a resistor whose resistance changes predictably with temperature. The heater control board reads that resistance and turns it into a water temperature. Every decision the heater makes about firing, holding and shutting down comes back to that one reading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSensors sitting in pool water drift and eventually fail. When they do, the heater is working from bad information: the panel shows a temperature the water is not at, the heater short cycles, will not reach setpoint, or throws a sensor fault. Replacing the thermistor is the usual first move once the wiring has been checked.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric or original\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the generic version. The original manufacturer thermistor for the same heater electrical system is stocked separately if you would rather fit the factory part.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48633999130836,"sku":"SDC-151-0008","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2ad7ae48-68e3-4c62-a674-9b52111e5c62.jpg?v=1788823575"},{"product_id":"generic-sw-41-007-thermal-regulator-for-mastertemp-max-e-therm-heater","title":"Swimables Generic Thermal Regulator for MasterTemp and Max-E-Therm Heaters","description":"\u003cp\u003eThe Swimables SW-41-007 is a generic thermal regulator for MasterTemp and Max-E-Therm pool heaters. It is an aftermarket part rather than the original manufacturer item, offered as an alternative when the OEM regulator is being replaced.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the regulator does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe thermal regulator meters how much of the incoming water actually passes through the heat exchanger and how much bypasses it. That balance is what holds the exchanger in the temperature range it was designed for, whatever the pool water is doing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it matters more than its size suggests\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen the regulator sticks, the exchanger runs outside that band. Too cool and combustion gases condense inside the heater, which attacks the tubes from the outside. Too hot and the metal takes thermal stress it was not meant to take repeatedly. Either way the part that suffers is the heat exchanger, the most expensive component in the heater, which is why a suspect regulator is worth changing rather than watching.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48634382221524,"sku":"SDC-151-0002","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e4f26ef0-8b20-4b93-818f-352a30e2b84c.jpg?v=1788828847"},{"product_id":"swimables-sw-26-997-generic-clamp-nut-replacement-for-fns-plus-quad-de-and-fullfloxf-filters","title":"Swimables Generic Clamp Nut Replacement for FNS Plus, Quad DE and FullFloXF Filters","description":"\u003cp\u003eThe Swimables SW-26-997 is a generic clamp nut for FNS Plus, Quad DE and FullFloXF filters. It replaces the original part number 194997.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the clamp nut does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese filters close with a band that wraps the seam between the two halves of the tank, and the nut is what draws that band tight. All of the clamping force that keeps a pressurized tank sealed passes through it, which is why a nut that is corroded, rounded or stripping is worth replacing rather than nursing along for another season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric rather than OEM\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an aftermarket part, not the factory nut. It is built as a direct replacement for 194997 and is priced accordingly. If you specifically need the original manufacturer hardware, order the OEM number instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile you are there\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tank o-ring sits under the band and is the other half of the seal. If the filter has been leaking at the seam, the o-ring is at least as likely a cause as the hardware, so inspect both while the tank is open.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48634543538388,"sku":"SDC-051-0005","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e5b78e27-dcec-44b3-8a9e-4ca1517faaac.jpg?v=1788834082"},{"product_id":"swimables-sw-26-855-3-4-stainless-steel-air-vent-for-nautilus-fns-and-fns-plus-filters","title":"Swimables 3\/4\" Stainless Steel Air Vent for Nautilus FNS and FNS Plus Filters","description":"\u003cp\u003eThe Swimables SW-26-855 is a 3\/4 inch stainless steel air vent for Nautilus FNS and FNS Plus filters. It replaces part number 172855.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the air vent does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAir collects at the top of a filter tank whenever the system is opened, drained or has drawn air on a poor prime. That air has to come out, and the vent at the top of the tank is how it goes. Left in, it cuts flow, makes the pressure gauge read strangely and can make a tank behave in ways that get blamed on the filter media.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy they get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe vent is the most handled fitting on the whole filter, so it wears out first. Stainless steel gives the body more life than plastic in a part that is opened and closed constantly and lives in sun and pool chemistry. This is an aftermarket Swimables part rather than an original manufacturer one, offered as a direct alternative to 172855.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48634719142100,"sku":"SDC-051-0003","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_febcca0a-f49d-4100-aa8b-e2004553600c.jpg?v=1788836541"},{"product_id":"swimables-sw-21-092-generic-nut-replacement-for-pentair-superflo-pump","title":"Swimables Generic Nut Replacement for Pentair SuperFlo Pump","description":"\u003cp\u003eThe Swimables SW-21-092 is a generic replacement nut for the Pentair SuperFlo pump. It replaces Pentair part 350092.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric, and clearly so\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is an aftermarket part rather than a Pentair original. That is the whole proposition: the same function at a lower cost. If you specifically want the factory component, order the Pentair 350092 instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA nut usually gets replaced because something at that joint is leaking or because the original was cracked coming apart. Since the joint is already open, look at the o-ring behind it. Fitting a new nut over a flattened or nicked o-ring will leave you with the same drip and a second trip to the equipment pad.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48634808500436,"sku":"SDC-101-0005","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8b2ba61a-35aa-4cc0-8681-077ab42446e5.jpg?v=1788837719"},{"product_id":"3-pack-stainless-steel-v-clips","title":"Swimables 3 Pack Stainless Steel V-Clips","description":"\u003cp\u003eThe Swimables SW-10-033 is a three pack of stainless steel V-clips, the sprung clips that hold pole mounted tools onto a telescopic pole.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat they fix\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA brush head, net or vacuum that keeps dropping off the pole is almost never a worn out head. It is the clip. The V-clip presses into the tool hub and springs out through the hole in the pole, and when it loses its tension or corrodes through, the tool comes loose the moment you push against it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy stainless matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChlorinated water is hard on plated steel. A stainless clip holds its spring and stays intact through seasons of being pushed in and pulled out, which is the whole reason to replace a failed clip with a stainless one rather than the cheapest available.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThey are listed for brushes, poles, nets, brush vacuums and similar tools. Three clips means you can do more than one repair and still have a spare for the next one.\u003c\/p\u003e","brand":"Swimables","offers":[{"title":"Default Title","offer_id":48634843627732,"sku":"SDC-40-1001","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_96139e1d-745b-44e7-bf75-6be7ac2390f8.jpg?v=1788837911"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/swimables.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}