{"title":"Waterway","description":"\u003cp\u003eWaterway pool equipment and replacement parts at Active Pool Supply.\u003c\/p\u003e","products":[{"product_id":"6-pump-trap-assembly-2x2","title":"Waterway 6 in. Pump Trap Assembly, 2 in. x 2 in. Ports","description":"\u003cp\u003eWaterway 310-6600 is the complete 6 in. strainer trap for Waterway pumps plumbed in 2 in. It is the assembly seen on the front of the Waterway Hi-Flow pump and is listed for the Premier and Renegade model 756 pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe trap body with 2 in. x 2 in. ports and its drain plug, the new style lid assembly with o-ring, a pump basket, and the split nut assembly with its two screws. That is every piece needed to replace a cracked or leaking trap without hunting down small parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck your port size. This trap is 2 in. on both ports; Waterway also offers the 6 in. trap in 1.5 in. x 1.5 in. and 1.5 in. x 2 in. Note that Waterway has temporarily changed the color of the replacement trap, so you may receive a gray trap rather than the one pictured. It is the same part.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48624833298644,"sku":"WWP-101-8061","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f4ab90cb-7c1e-4607-ac98-8aed73bda88e.jpg?v=1788643305"},{"product_id":"waterway-520-5147-6s-100sf-95-thp-3-clearwater-cartridge-filter-system","title":"Waterway 100 SqFt ClearWater II Cartridge Filter System for Above Ground Pool 1.5HP","description":"\u003cp\u003eThe Waterway ClearWater II 520-5147-6S pairs a 100 sq ft cartridge filter with a 1.5 HP single speed pump as one assembled system for above ground pools. It arrives ready to set beside the pool and connect to the skimmer and return.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSimple to run\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump is a single speed with a 3 ft cord and NEMA plug, so there is no programming and no hard wiring. Rated at 0.95 total horsepower, it is a straightforward match for the filter. The cartridge design means no backwash valve and no sand: when the gauge climbs, rinse the cartridge and reinstall it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck that your pool plumbing matches the system connections and that you have a properly protected outdoor outlet within reach of the cord.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48624869933268,"sku":"WWP-05-2090","price":768.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/520-5147-6S.jpg?v=1788647574"},{"product_id":"waterway-522-5167-6s-150sf-1thp-3-2spd-clearwater-cartridge-filter-system","title":"Waterway 150 Sq. Ft. 1.5 HP 2 Speed Clearwater Cartridge Filter System","description":"\u003cp\u003eThe Waterway 522-5167-6S pairs a ClearWater II 150 sq. ft. cartridge filter with a 1.5 HP Hi-Flo II two speed pump, sold as one system for above ground pools. The pump comes with a 3 ft NEMA cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCartridge filtration\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cartridge filter has no backwash valve and sends no water to waste. When the pressure gauge climbs, the cartridge comes out, gets a rinse with a garden hose and goes back in. 150 square feet of filter area means longer runs between cleanings than a small cartridge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speed pump\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Hi-Flo II runs on low speed for everyday circulation, which is quieter and uses less power, and switches to high for vacuuming, priming or a fast turnover. Because Waterway sizes the pump and filter together, the pair is matched from the start rather than assembled from separate parts.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48624872554708,"sku":"WWP-05-2087","price":927.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/WWP-05-2087_1a.png?v=1788647808"},{"product_id":"1-1-2-top-mount-multiport-valve-2002-after","title":"Waterway 1-1\/2\" Top Mount Multiport Valve (2002 \u0026 After)","description":"\u003cp\u003eThe Waterway WVS003 is the seven position, 1-1\/2 in. top mount multiport valve for Waterway sand filters built in 2002 and after. It is the backwash valve on the TWM, Clearwater, Carefree and Baquapure filters, and on the same filter sold under other names: Rec Warehouse 4742-010, Baquapure 111960, Premium Blue, Cyclone, Sparko, Eco Kleer, Aquastar Blue Star and Aqua Coastal.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the year\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway changed the valve in 2002. This one fits 2002 and later filters; a filter from 2001 or earlier takes a different valve kit. If you are not sure, look for the date on the tank before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemoval tool\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe valve collar is meant to come off with the Waterway 505-1970 removal wrench, which is not included. Have it on hand before you start the swap.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48624873242836,"sku":"WWP-06-408","price":117.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_fa6a7a5d-0b0a-4708-bede-ce42ffc0d526.jpg?v=1788647899"},{"product_id":"lock-ring-pro-clean-plus","title":"Waterway Lock Ring, Pro Clean Plus","description":"\u003cp\u003eThe Waterway 550-0701B is the medium filter lid and lock ring assembly for Pro Clean Plus cartridge filters in the 125 and 150 sq ft sizes. It is the genuine Waterway part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your Pro Clean Plus is a 125 or 150 sq ft model. Other sizes in the line use a different ring. Replace the ring if it is cracked, if the threads are stripped, or if it no longer tightens down and seals.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48624883073236,"sku":"WWP-051-0235","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4e4d2244-b12c-4bdc-9f4f-b40123a51068.jpg?v=1788649465"},{"product_id":"waterway-tank-body-crystal-water-gray-w-label","title":"Waterway Tank Body, Crystal Water, Gray, with Label","description":"\u003cp\u003eThe Waterway 550-4407 is the replacement tank body for the Crystal Water cartridge filter. It is the genuine Waterway part, gray, with the Crystal Water label already applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it replaces\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the body only. If the tank has cracked or the clamp lip is damaged, the body swaps out while the lid, clamp, top manifold and cartridge move over from the old filter. Fit a new tank o-ring during reassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOther Crystal Water parts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe matching tank lid, tank o-ring, pressure relief valve, clamp and spring assembly, top manifold with air screen and bulkhead fittings are also available if more than the body needs attention.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48624918003924,"sku":"WWP-550-4400","price":435.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2aa9f0c1-4304-4351-b750-81f7370ec81a.jpg?v=1788653298"},{"product_id":"tank-lid-w-lock-ring-pro-clean-plus-125-150-sqft","title":"Waterway Tank Lid with Lock Ring, Pro Clean Plus 125\/150 sq ft","description":"\u003cp\u003eThe Waterway 550-0621 is the replacement tank lid for the Pro Clean Plus cartridge filters in the 125 and 150 sq ft sizes, 2015 series. It comes as a complete assembly: the lid, the locking ring that holds it to the tank and a pressure gauge already mounted. The assembly stands 15 in. tall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross reference\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same lid is sold under Leslies and Jacuzzi part number 677828, so if that is the number on your filter or in your manual, this is the matching Waterway part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tank o-ring is not included. Since the lid has to come off to fit the new one anyway, inspect the o-ring and replace it if it is flat, cracked or stretched. Confirm your filter is the 125 or 150 sq ft Pro Clean Plus; other Waterway filters use different lids.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625021386964,"sku":"WWP-051-0233","price":262.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0f16c0f4-3955-4e0c-8716-35ae40ab6868.jpg?v=1788662454"},{"product_id":"waterway-proclean-plus-filter-lid-lock-ring-assembly-550-0611b","title":"Waterway ProClean Plus Filter Lid and Lock-Ring Assembly, 75 to 100 Sq. Ft.","description":"\u003cp\u003eWaterway 550-0611B is the lid and lock-ring assembly for ProClean Plus cartridge filters in the 75 and 100 sq. ft. sizes. It is the genuine Waterway Plastics part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the assembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid and its lock-ring are sold together so the two pieces seat and thread correctly. A hairline crack in a filter lid shows up as a tank that drips at the top or will not build pressure, and this assembly is the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm your ProClean Plus is a 75 or 100 sq. ft. model. Larger tanks in the line take a different lid. If the tank o-ring is flattened, replace it while the lid is off.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625022894292,"sku":"WWP-051-5322","price":257.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_501ec76a-1dd8-42cd-883a-04e61fb5f56b.png?v=1788662550"},{"product_id":"renegade-skimmer-basket","title":"Waterway Renegade Pool Skimmer Basket","description":"\u003cp\u003eThe Waterway 542-3240 is the replacement skimmer basket for Renegade skimmers. It is the genuine Waterway part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTop outside diameter 8 in., 7-13\/16 in. across the top from flat side to flat side, 5-1\/4 in. high, and 5-3\/4 in. across the bottom. Measure your old basket against those figures if you are not sure which skimmer body you have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket sits in the skimmer throat and catches leaves, bugs and larger debris before the water reaches the pump. It is the first line of defense for the pump strainer and impeller, which is why a basket with a split side or a broken rim is worth replacing straight away rather than at the end of the season.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLift the old basket out and drop the new one in. It fits Renegade gunite skimmers as well as the vinyl liner and fiberglass versions.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625722097876,"sku":"WWP-251-2083","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b78c5416-579d-4168-9386-56b8e900cde3.jpg?v=1788689974"},{"product_id":"complete-vinyl-skimmer-wide-mouth-9-throat-white","title":"Waterway Complete Renegade Vinyl Skimmer, Wide Mouth, 9 in. Throat, White","description":"\u003cp\u003eThe Waterway 540-8500 is the complete Renegade skimmer in the wide mouth body with a 9 in. throat, finished in white. It is a two port skimmer with a square lid, and it ships with a lock-down vacuum plate and an extension collar.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt for liner pools\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Renegade is made for vinyl liner installations and works with existing steel, polymer and fiberglass pool walls. Waterway rates it at 75 GPM, and the plumbing is sized generously to get there: the 2 in. socket takes a 2-1\/2 in. spigot for more flow, the 1-1\/2 in. socket takes a 2 in. spigot to make the plumbing easier, and there is a 1\/2 in. socket for an overflow hose. All of them are PVC sockets, which glue up cleanly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBasket and weir\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe basket is one of the largest offered on a skimmer and it twist locks into place, so it will not float up when the pump shuts off and it still lifts straight out for emptying. The weir door is spring loaded, which is what makes it quick to fit and quick to swap when it eventually wears.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA float valve and a skimmer test kit are available separately if the installation calls for them.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625747099860,"sku":"WWP-25-1686","price":167.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_49f4017b-2c7e-496d-a456-3601c3d112d1.jpg?v=1788691332"},{"product_id":"waterway-pd-165-power-defender-variable-speed-pump-1-65hp-230v","title":"Waterway Power Defender Variable Speed Pump 1.65HP 230V","description":"\u003cp\u003eThe Waterway PD-165 is the 1.65 HP Power Defender, a variable speed in ground pool pump built around energy efficiency and a motor that shrugs off the environment it sits in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConstruction is totally enclosed, with a powerful external fan pulling heat away while the enclosure keeps dirt and moisture off the windings. That combination is why the motor runs cool. Once powered, the pump selects 230V or 115V by itself, and Waterway states there is no drop in horsepower at either voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it to an existing pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Power Defender lines up with both Super Pump and IntelliFlo plumbing, which is the reason it is a common swap on older pads. Two self aligning unions are included, and a base for IntelliFlo comes with the pump. The listing also notes that the adjustable base kit is sold separately, so check which base your pad calls for before you order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWater side details\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump is pressure rated up to 50 PSI and uses silicon carbide Viton shaft seals for wear and chemical resistance. Freeze protection is built in, and the pump is D.O.E. and C.E.C. compliant, which matters where variable speed is required by code on new installations.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625749065940,"sku":"WWP-10-1066","price":1249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_667f1b77-ced5-47a1-9e4a-fa16884494c0.png?v=1788691653"},{"product_id":"tank-o-ring","title":"Waterway Crystal Water Tank O-Ring","description":"\u003cp\u003eThe Waterway 805-0000 is the tank o-ring for Crystal Water filters. It is listed for both the Crystal Water DE filters and the Crystal Water cartridge filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe o-ring sits in the groove between the two halves of the filter tank, where the clamp band pulls the lid down onto the body. Filter pressure works against that joint every time the pump runs, and the ring is the only thing keeping the water inside.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLook at it every time the tank is open. A ring that has flattened, hardened, cracked or will not sit back down in its groove should be replaced. Clean the groove out before fitting the new one, and lubricate it with a pool approved lubricant so it seats evenly as the band is tightened.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625791238356,"sku":"WWP-051-1352","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0e7301a4-f552-4e55-942f-1cd4f14c2eae.jpg?v=1788700199"},{"product_id":"3-4-hp-booster-pump","title":"Waterway 3\/4 HP Booster Pump","description":"\u003cp\u003eThis is the Waterway 3\/4 HP booster pump, the dedicated pump that supplies the extra pressure a pressure side pool cleaner needs. It ships as a complete unit, pump and motor together, so it goes in as a first time install or as a straight swap for a booster that has failed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe motor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway pairs the wet end with a high efficiency square flange 3\/4 HP motor rated 230\/115 V at 60 Hz on a 48 frame. That motor is what gives the pump its quiet running and its energy efficiency, and Waterway rates the pump among the highest head pressures in the booster class, which is the number that decides how hard your cleaner works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat comes with it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe box includes the reinforced flexible pump hose, the hose barb adapters and the clamps, so the plumbing side of the job is covered. The pump sits on a tall mounting base that gives you room to line the ports up with plumbing already on the pad.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis pump carries two part numbers in circulation, SG3810430-1PDA and 3810430-1PDA. Both refer to the same 3\/4 HP booster pump. Confirm your existing pump is a 3\/4 HP booster and that you have 230 V or 115 V available at the pad.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625796186324,"sku":"SPG-10-3048","price":501.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a2abf696-342c-44a1-b4fa-d02c4135a210.jpg?v=1788700282"},{"product_id":"adjustable-spa-jet-gunite","title":"Waterway Adjustable Spa Jet, Gunite","description":"\u003cp\u003eThe Waterway 210-3400 is the adjustable spa jet in the gunite version. It is the genuine Waterway fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable, and for gunite\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo details define this part. It is the adjustable jet rather than a fixed one, and it is the gunite version rather than the one specified for other wall construction. Match both when you replace a jet, because the wrong version will not seat correctly in the wall fitting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpas run a set of jets, and they age at much the same rate. Count what you are replacing before ordering so you are not waiting on a second delivery to finish the job.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48625847501012,"sku":"WWP-85-8087","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_88c9944e-05c1-4492-8af6-4d8c9419c042.jpg?v=1788701505"},{"product_id":"waterway-520-5167-6s-150sqf-95thp-gry-3cd-clearwater-cartridge-system","title":"Waterway Clearwater Cartridge Filter System, 150 Sq. Ft., .95 THP, Gray, 3 ft Cord","description":"\u003cp\u003eThe Waterway 520-5167-6S is a Clearwater cartridge filter system, sold as a matched filter and pump rather than as two separate purchases. It carries 150 sq. ft. of cartridge filter area, a pump rated at .95 THP, a gray finish and a 3 ft cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCartridge filtration\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA cartridge filter traps dirt in a pleated element instead of a sand bed. There is no backwash valve and no waste line, so nothing is dumped when the filter is cleaned. When the pressure gauge climbs, the pump goes off, the cartridge comes out, gets a rinse with a garden hose and goes back in. With 150 square feet of area, the intervals between those cleanings are long.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatched as a system\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause Waterway sizes the pump and filter together, the flow the pump produces suits the filter it is fitted to. That takes the guesswork out of pairing a pump to a tank, which is where a lot of undersized and oversized combinations come from.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626098766036,"sku":"WWP-05-3385","price":801.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/WWP-05-3385_1a.png?v=1788704681"},{"product_id":"poly-gunite-jet-assembly-1-5x2-tee-body","title":"Waterway Poly Gunite Jet Assembly 1.5\" x 2\" Tee Body","description":"\u003cp\u003eThe Waterway 210-3700 is the poly gunite jet assembly with a 1.5 inch by 2 inch tee body. It is the return jet body that gets plumbed into a gunite pool or spa wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe tee body is the buried half of the jet. It ties into the return line during the plumbing stage and gives the jet a fixed, sealed home in the shell. The face the swimmer sees, the poly jet internal, threads into the body afterwards and is chosen separately, which is why Waterway lists roto, pulsator and smooth face internals as their own parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart number note\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis jet is referenced in our source both as 210-3700 and as 210-3700B. If you are matching an existing installation, check the number molded or printed on the body you are replacing.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626104238292,"sku":"WWP-85-8000","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ae923036-0e7f-4aa5-8b17-c518bd5bd3e9.jpg?v=1788704822"},{"product_id":"lid-diverter-assembly-with-gasket","title":"Waterway Lid Diverter Assembly with Gasket","description":"\u003cp\u003eThe Waterway 600-9600 is the key cover assembly for Waterway top mount sand filter valves: the lid together with its diverter and the spider gasket. It is listed for some Clearwater and Carefree sand filters and for the 1-1\/2 inch 7 function top mount valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat goes wrong\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe spider gasket is the rubber star that seals one valve port from the next. It is the part of a multiport valve that wears first. Once it hardens or tears, water crosses between ports, and the classic symptom is a trickle out of the waste line while the handle is set to filter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the assembly\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe gasket only seals if the face it presses against is flat and clean. On a valve that has been in service for years, that face is often the real problem. Replacing the lid, diverter and gasket as one assembly removes the guesswork and puts a fresh sealing surface back in the valve.\u003c\/p\u003e\u003cp\u003eWaterway built more than one valve across the Clearwater and Carefree lines, so check your valve body against the assembly before ordering.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626117705940,"sku":"WWP-061-1000","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_52fb566f-b790-435c-ab8b-d184cca29400.jpg?v=1788705049"},{"product_id":"skimmer-ag-wide-mouth-white","title":"Waterway 1-1\/2\" FPT White Flo-Pro II Long Throat Wide-Mouth Above-Ground Skimmer","description":"\u003cp\u003eThe Waterway 560-D3C60L is the Flo-Pro II above-ground skimmer in white, in the long throat wide-mouth configuration with a return, plumbed with 1-1\/2 inch FPT connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWide mouth and long throat\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wide-mouth opening pulls in surface debris across a broader span than a standard throat, which matters on a pool where leaves collect faster than one narrow opening can take them. The long throat is the taller version of the passage through the wall, so it suits installations where the standard reach comes up short. Waterway builds a short throat version of the same skimmer if that is what you are replacing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConnections\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth connections are 1-1\/2 inch female pipe thread, the usual above-ground size, and this configuration includes the return alongside the suction side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit and finish\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is listed as a vinyl type skimmer, meaning above-ground and vinyl wall installations, and the white finish blends with a standard above-ground wall rather than standing out against it.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626225021140,"sku":"WWP-25-1648","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_6c72eb7b-14e3-492b-9f38-c043150cbac5.jpg?v=1788706547"},{"product_id":"waterway-hi-flo-ii-sd-10-2-n-2-speed-hi-flo-ii-above-ground-pool-pump-with-3-nema-cord-1-thp","title":"Waterway Hi-Flo II 2 Speed Above Ground Pool Pump with 3' NEMA Cord, 1 THP","description":"\u003cp\u003eThe Waterway Hi-Flo II SD-10-2-N is a two speed above ground pool pump rated at 1 THP, supplied with a 3 ft NEMA cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed pump runs flat out whenever it runs. A two speed pump lets you turn the water over on low, which is quieter and cheaper, then step up to high speed for the jobs that actually need flow: vacuuming, backwashing, or bringing cloudy water back after a storm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe 3 ft NEMA cord comes on the pump, so it plugs into an outlet rather than needing a hard wired connection at the pad. Check that the plumbing and the electrical supply at your pool match the pump before you order.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626262540500,"sku":"WWP-10-1812","price":354.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2526341a-41e2-4958-a063-f824c4280d7d.jpg?v=1788707465"},{"product_id":"filter-collar-valve-wrench","title":"Waterway Filter Collar Valve Wrench","description":"\u003cp\u003eThe Waterway 505-1970 is the plastic collar wrench for split-nut threaded style filters. It fits Waterway TWM, ClearWater and Carefree sand filters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe collar is what holds the multiport valve down on the filter tank. It has to come off for a valve service, a spider gasket, or a sand change, and it has to go back down evenly and tight enough to seal. That is a job with a specific tool, and this is it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy plastic\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe collar is plastic, and so is the wrench. A screwdriver, a mallet or a pair of pliers takes material off the lugs every time it slips, and a collar with rounded lugs cannot be pulled down square again. From then on it seeps, and the fix is a new collar rather than a new gasket.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626285379796,"sku":"WWP-051-0222","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8c91c319-087a-4bd9-b45e-9b83722e3728.jpg?v=1788707656"},{"product_id":"waterway-pool-equipment-522-5247-6s-22-1-thp-3-nema-2-speed-clearwater-sand-filter-system","title":"Waterway 1 THP 2-Speed Pump with 22\" Clearwater Sand Filter Complete Aboveground Pool Equipment System","description":"\u003cp\u003eThe Waterway 522-5247-6S is a complete aboveground pool equipment system: a 22 inch Clearwater sand filter and a 1 THP two speed Hi-Flo II pump, supplied as one package with a 3 foot NEMA cord.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe filter side\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwenty two inches is the larger Clearwater tank, which means more sand in the bed and more surface for the water to pass through. Inside, high flow laterals collect the filtered water without choking the rate the pump can move. The multiport valve connects through a union, so the whole filter can be unbolted and rolled out of the way when it needs service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe pump side\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Hi-Flo II is Waterway high performance aboveground pump, here at 1 THP with two speeds. Low speed handles routine filtration hours quietly and cheaply. High speed is on hand when the pool needs a full turnover, a vacuum or a backwash. The pump carries a large 6 inch trap with a two piece lid, so the basket holds more debris and takes less effort to reach.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho it suits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the straightforward answer for an aboveground pool that needs both halves of its equipment replaced at once, or for a new install where matching a pump to a filter by hand is more work than it is worth.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626300944596,"sku":"WWP-05-2076","price":647.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_3ad0f7a3-2a2e-4165-899f-3b48ca7fd01f.jpg?v=1788707897"},{"product_id":"waterway-540-8550-renegade-2-socket-white-wide-mouth-vinyl-liner-in-ground-skimmer","title":"Waterway Renegade 2\" Socket White Wide-Mouth Vinyl Liner In-Ground Skimmer","description":"\u003cp\u003eThe Waterway 540-8550 is the Renegade wide-mouth in-ground skimmer for vinyl liner pools, supplied in white with a 2 inch socket port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy wide-mouth\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA wider throat pulls surface water across a broader front, which is what gets leaves and pollen out of the pool before they sink. On a vinyl liner pool that matters twice over, because debris left on the floor is debris you have to vacuum off a liner rather than brush off plaster.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlumbing and fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe port is a 2 inch socket, so 2 inch pipe slips straight in with no adapter. This is the vinyl liner version of the Renegade, and Waterway builds separate Renegade skimmers for concrete and gunite pools, so check which construction you have before ordering. Renegade baskets and Renegade vinyl liner lids are the matching service parts.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626357272788,"sku":"WWP-25-7000","price":165.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_44d5f417-9735-4362-8f32-4ef62372c701.jpg?v=1788709196"},{"product_id":"waterway-640-1900-v-10-tru-flo-cover-and-frame-white","title":"Waterway 10\" Tru Flo Cover and Frame, White","description":"\u003cp\u003eThe Waterway 640-1900 V is the 10 inch Tru Flo cover and frame in white. It is supplied as the cover with its matching frame rather than as the cover alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy replace it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCovers of this kind live in sun and chlorinated water and eventually discolor, become brittle or crack. Replacing cover and frame as a set means the new cover seats in a frame that was made for it, rather than in one that has already been distorted by age.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck the Waterway part number against the item you are replacing and confirm the 10 inch size and the Tru Flo name. Waterway builds several cover ranges, and they are not interchangeable.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626364842196,"sku":"WWP-25-8616","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4ff32daa-ed56-404a-a4ad-9192afa7c70f.jpg?v=1788709309"},{"product_id":"executive-5-hp-2-speed-2-56-frame-230-volt-pump","title":"Waterway Executive 5 HP 2 Speed 2\" 56 Frame 230 Volt Pump","description":"\u003cp\u003eThe Waterway Executive 3722021-1D is a 5 HP two speed spa pump on a 56 frame motor, plumbed 2 inch on both the intake and the discharge and wired for 230\/240 volts. It draws 16.4 amps on high speed and 4.8 amps on low.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speeds\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single speed pump runs flat out whether the spa is filtering or in use. Two speeds split that job: the low speed turns the water over quietly and cheaply through the filter cycle, and the high speed is there when the jets are on. On a system plumbed for it, that is the difference between a pump that runs all day and a power bill that does the same.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing and fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the 56 frame version, which is the heavier motor frame, and it is a 2 inch by 2 inch pump. Check the frame size, the port sizes and the voltage on the pump you are replacing before ordering, because 48 frame and 56 frame units do not swap freely on a spa base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCross reference\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pump is also referenced as PF-50-2N22C. If that is the number on the old label, compare the voltage, amperage and port sizes here against it.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626378604756,"sku":"WWP-10-1423","price":465.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_0b502cf9-70ee-4923-b64b-ec16485e42c5.jpg?v=1788709513"},{"product_id":"champion-pump-housing-new-style","title":"Waterway Champion Pump Housing, New Style","description":"\u003cp\u003eThe Waterway 315-1400 is the Champion pump housing, the trap basket section that holds the strainer basket ahead of the impeller. This is the current new style version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRead this before ordering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway kept the part number the same and changed the design substantially. The old housing had brass inserts molded into the bolt positions, which took a shorter bolt threaded into the insert. The new housing has plain holes where those inserts used to be, and it uses a longer bolt with a nut and a washer instead. If you are replacing an original brass insert housing, your existing bolts will not work with this part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe hardware\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe bolt, nut and washer are separate items and are not supplied with the housing. It is worth ordering them at the same time so the pump can go back together in one session rather than two.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe housing is listed for the Waterway Champion 56 frame pump, referenced as the CHAMPS model. It is the genuine Waterway part, 315-1400.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626385715412,"sku":"WWP-101-1400","price":230.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_16d8ed22-066b-46a7-85b3-684482c247b8.jpg?v=1788709630"},{"product_id":"1-1-2-x-1-1-2-s-union-mpt","title":"Waterway 1-1\/2\" x 1-1\/2\" S Union MPT","description":"\u003cp\u003eThe Waterway 400-4030 is a 1-1\/2\" union for pool equipment plumbing: a 1-1\/2\" male pipe thread on one side and a 1-1\/2\" female slip socket on the other.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy unions belong at the equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnything you will one day take off the pad should be plumbed with unions. Put one on each side of the pump and the filter and every future service call is a matter of loosening two nuts by hand. Without them, pulling a pump means cutting pipe, buying couplings, and waiting on glue before the system can run again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe threaded end screws into the port on the pump or filter. Use silicone or teflon tape on that thread and take it up snug rather than hard, since plastic threads split when they are overtightened. The slip side solvent welds onto 1-1\/2\" PVC pipe. The union nut seals on its own face, so it does not need tape.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626391875796,"sku":"WWP-56-4516","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a7aa0dac-bf7d-4e40-9461-2f9b34f390e9.jpg?v=1788709731"},{"product_id":"1-5hp-executive-spa-pump-2-speed-115v-48fr-2","title":"Waterway 1.5HP Executive Spa Pump, 2 Speed, 115v, 48fr, 2\"","description":"\u003cp\u003eThis is the Waterway Executive spa pump rated at 1.5 horsepower, two speed, 115 volt, built on a 48 frame motor with 2 inch suction and discharge. Waterway part number 3420610-1A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo speeds, two jobs\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa asks a pump to do two very different things. Most of the time it just needs slow, quiet water movement to hold temperature and keep the sanitizer distributed, and that is what low speed is for. When the jets are turned on, high speed delivers the pressure they need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the replacement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree numbers decide whether a spa pump drops into an existing cabinet: the motor frame, the voltage and the port size. This one is 48 frame, 115 volt and 2 inch. Check all three against the pump coming out, because a mismatch on any of them means new plumbing or new wiring.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626496667860,"sku":"WWP-10-1001","price":420.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ccbb9c1f-c3c5-4130-ade4-370f3a8ba832.png?v=1788710958"},{"product_id":"waterway-plastics-640-4740-v-universal-flat-grate-12-x-12-white","title":"Waterway Universal Grate, 12 in. x 12 in., White","description":"\u003cp\u003eThe Waterway Plastics 640-4740 V is a universal grate with a 12 in. by 12 in. white face. Waterway lists it as a flat grate, and the product notes add that the face carries a slight dome, so it sits just proud rather than dead level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat universal means here\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUniversal refers to the pattern, not to the size. The grate still has to cover the opening beneath it, so the useful step before ordering is to measure the sump and compare it against the 12 in. by 12 in. face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy grates get replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGrates take sun, chemicals and foot traffic. They fade, they get brittle, and fasteners break out of the corners. A grate that is cracked or loose is worth changing rather than patching.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626505253076,"sku":"WWP-25-8071","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_857ecf65-81a6-47c2-96a4-aa527b14b66a.png?v=1788711066"},{"product_id":"inline-chlorinator-white","title":"Waterway In-Line Chlorinator, White","description":"\u003cp\u003eThe Waterway CLC012-W is an automatic in-line chlorine tablet feeder in white. It holds 12 tablets and plumbs to a 2 inch PVC socket, with 1-1\/2 inch reducers usable where the return line is the smaller size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn-line means in the line\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAn in-line feeder is solvent welded into the return plumbing so the full flow passes through the body. That is different from an off-line feeder, which sits alongside the pipe and takes only a small bypass stream. In-line installation is generally the neater arrangement on a new or rebuilt equipment pad, since the feeder becomes part of the run rather than an addition bolted next to it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteady dosing instead of hand feeding\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTablets in the feeder dissolve gradually as water moves past them, so sanitizer goes in at a rate you set with the control rather than in the peaks and troughs of adding chlorine by hand. Twelve tablets is a useful capacity for a residential inground pool, meaning fewer trips out to reload.\u003c\/p\u003e\u003cp\u003eWaterway lists this feeder for in ground residential pools and builds it in white to match standard PVC equipment. A clear bodied version of the same 12 tablet feeder is available under a separate part number.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626583929044,"sku":"WWP-45-1004","price":108.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_8d387cc1-9a2d-4663-9e44-2bd14ffc96d3.jpg?v=1788712725"},{"product_id":"diverter-spider-gasket","title":"Waterway Diverter Spider Gasket","description":"\u003cp\u003eThe Waterway 711-1910B is the diverter spider gasket, also called the valve seat gasket, for Waterway filter valves. It is molded in white rubber with a four spoke pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe gasket measures 5-1\/4 inches across the outside with a 15\/16 inch inside hole. Each of the four spokes is 3\/8 inch wide. Those figures are worth checking against the gasket you are removing, since spider gaskets look alike across brands and only the exact one seals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat goes wrong\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe spider gasket is what the rotating diverter presses against to keep the valve ports separated. When it flattens, tears at a spoke, or hardens until it no longer stands proud of its groove, water crosses between ports. The symptoms are familiar: water going to waste while the valve is set to filter, backwash that never quite stops, or a filter that will not build pressure. Replacing the gasket restores the seal the whole valve depends on.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626590548180,"sku":"WWP-061-1910","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_817b661d-86a5-4cde-b89f-db2b25031a6e.gif?v=1788712773"},{"product_id":"waterway-plastics-poly-storm-gunite-jet-internals-twin-roto-5-scallop-gray","title":"Waterway Thread-in 5-Scallop Twin Roto Poly Storm Gunite Jet Internal, Gray","description":"\u003cp\u003eThis is the Waterway 229-8127, a Poly Storm gunite jet internal in gray. It is the thread-in twin roto version with a 5-scallop escutcheon face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the internal is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn a gunite pool the jet body is set into the wall when the shell is built and stays there. The internal is the part that threads into that body, and it is what you actually see and what shapes the water leaving the jet. Because it screws in, it can be replaced on its own without disturbing the plumbing behind the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching what you have\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWaterway builds Poly Storm internals in several nozzle styles, face patterns and colors. This one is twin roto, 5-scallop, gray. If you are replacing one of a set, pull the old internal and match style and color so the whole wall looks and behaves the same.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626719621332,"sku":"WWP-85-8633","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f32ab296-62e0-4d0a-8a55-b59451ce1f70.jpg?v=1788714034"},{"product_id":"2-executive-wet-end-4hp","title":"Waterway Executive 4 HP 2 in. Wet End","description":"\u003cp\u003eThis is the complete wet end for the Waterway Executive pump, part number 310-1740. It is the 4 HP version, built for a 56Y frame motor, with a 2 in. inlet and a 2 in. side discharge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wet end is the hydraulic half of the pump, the part the water actually passes through. The motor is separate and is not included. Buying the wet end rather than a complete pump is the standard repair when the housing has cracked or the internals have worn but the motor is still sound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching it up\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTwo things have to match: the motor frame and the plumbing. This wet end is a 56Y frame fitment with 2 in. ports, in the 4 HP size of the Executive range. Confirm the frame stamped on your motor and the size of your existing suction and discharge before ordering.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626730533076,"sku":"WWP-10-1465","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_346a1216-e83e-43a8-9b5a-f9b68f24ae9d.jpg?v=1788714128"},{"product_id":"pump-union-2-nut-x-1-1-2-slip-or-2spg","title":"Waterway Pump Union, 2\" Nut x 1-1\/2\" Slip or 2\" Spigot","description":"\u003cp\u003eThe Waterway 400-9230 is a pump union with a 2 inch nut. It can be plumbed either as a 1-1\/2 in. slip connection or as a 2 in. spigot, so one part covers both pipe sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat a union buys you\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnions are what stand between a routine service and an afternoon with a saw and a can of glue. Loosen the nut and the pump lifts off. That matters at winterizing, at seal replacement, and any time the wet end has to come apart.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck which side you are replacing and whether the pipe going into it is 1-1\/2 or 2 inch. Most installations carry a union on the suction and another on the discharge, so look at both before deciding how many to buy.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626830180564,"sku":"WWP-101-8014","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bf05a6f8-f152-421a-abdc-1d94fe2ebf08.jpg?v=1788715660"},{"product_id":"lid-6-trap-easy-lock-new-style","title":"Waterway 6\" Trap Lid, Easy Lock, New Style","description":"\u003cp\u003eThe Waterway 319-4100 is the new style 6 inch easy lock trap lid assembly, used on Waterway Hi-Flo, Mustang, Workhorse and Workman pumps. It replaces the old style 319-3260, and the new style is what Waterway ships now.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy lock\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe lid locks down by hand rather than needing a tool. That matters more than it sounds, because the trap gets opened every time the basket is emptied, and a lid that is awkward to seat is a lid that eventually gets cross threaded or overtightened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck the o-ring too\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost trap lid complaints are really seal complaints. If the pump is losing prime, running with air in the trap or dripping at the lid, look at the o-ring for the 6 inch trap cover as well as the lid itself. That o-ring is a separate Waterway part. Replacing both at once is the usual fix on a pump that has been in service a few seasons.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626863210708,"sku":"WWP-101-8069","price":41.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_704ed6e5-69eb-4a18-85b8-f27cd3e5facd.jpg?v=1788715995"},{"product_id":"waterway-plastics-wall-fitting-escutcheon-gray-in-ground-pool-vinyl-liner-return-fittings","title":"Waterway Wall Fitting Escutcheon, Gray, for In-Ground Vinyl Liner Return Fittings","description":"\u003cp\u003eThe Waterway 218-1447 is the gray escutcheon for in-ground vinyl liner pool return wall fittings, part of the eyeball return fitting assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it is\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe escutcheon is the ring you actually see from inside the pool. It sits over the wall fitting and finishes the opening in the liner, hiding the joint and giving the return a clean face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it gets replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEscutcheons take the worst of the sun and the chemistry while doing none of the work. They chalk, yellow and crack years before the fitting behind them gives any trouble, so swapping the trim ring is usually all a tired looking return needs. This is the gray version, so match it to the rest of your return hardware.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626863407316,"sku":"WWP-85-8222","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/218-1447-eyeball-fitting-escutcheon-gray.jpg?v=1788716004"},{"product_id":"waterway-pd-270-2-7hp-230v-power-defender-vsp-champion-pump","title":"Waterway 2.7 HP 230V Power Defender VSP Champion Pump","description":"\u003cp\u003eThe Waterway PD-270 Power Defender is a 2.7 HP variable speed in-ground pool pump that runs on 230V. Speeds are programmed at the pump, so it can idle through a long filtration cycle and step up only when a cleaner, a spa or a water feature calls for real flow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow it is built\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe motor is totally enclosed and cooled by an external fan, which keeps dirt and moisture out while holding running temperature down. The shaft seal uses silicon carbide with Viton for wear and chemical resistance, and the pump is pressure rated up to 50 PSI. Built in freeze protection watches for cold weather, and the display stays readable in bright sun or at night.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOn the pad\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt arrives with a base for IntelliFlo and two self-aligning pump unions, so it can take the place of an existing pump without rebuilding the plumbing around it. The controls can be mounted off board if the pad layout calls for it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRunning other equipment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Power Defender can install and program an additional load, so a booster pump or a chlorine generator can be tied to the pump schedule instead of a separate timer. The pump is D.O.E. and C.E.C. compliant.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626865537236,"sku":"WWP-10-5060","price":1507.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ef14ab84-7602-4545-8f2b-c619be1666aa.jpg?v=1788716030"},{"product_id":"6-pump-trap-assembly-1-5-x-1-5","title":"Waterway 6\" Pump Trap Assembly, 1.5\" x 1.5\"","description":"\u003cp\u003eThe Waterway 310-5400 is the 6 in. pump trap assembly with 1.5 in. by 1.5 in. connections. It is the genuine Waterway part, and it arrives with the self locking lid and the 415-4050 clamp nut already on the pump side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the trap does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe trap sits ahead of the pump and holds the leaves, hair and grit pulled in from the pool. Everything it catches is debris that never reaches the impeller, so a sound trap with a lid that seals is what keeps the pump primed and the flow steady.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSizing and fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConnections are standard 1-1\/2 in. PVC plumbing size. The nut that screws onto the pump measures close to 2-3\/8 in. inside diameter, so measure yours before ordering if you are matching an older housing. Waterway lists this trap under its center discharge pump parts, and the product copy also names the Hi-Flo aboveground pump, so compare the old assembly against the photos if you are unsure which family your pump belongs to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe lid\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe assembly now comes with the new style lid, part 319-4100. If you have been running the old lid, expect the replacement to look different; the self locking design is the current one.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48626959286484,"sku":"WWP-101-8060","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_b8638d16-10e1-4f53-b5f6-6349c175d085.jpg?v=1788718521"},{"product_id":"proclean-plus-cartridge-filter-100-sq-ft","title":"Waterway ProClean Plus Cartridge Filter PCCF-100, 100 Sq Ft","description":"\u003cp\u003eThe Waterway ProClean Plus PCCF-100 is a single cartridge filter system with 100 square feet of element, rated at 100 gpm. It is built for in ground pools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe raised inlet\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWater enters the tank higher than it does on a conventional cartridge filter. That gives the tank more room to hold dirt before pressure climbs, and it lets the plumbing come off the pump on a shorter, straighter run. Both add up to fewer cleanings and an easier install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt to last\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is molded ABS thermoplastic, a material that shrugs off pool water and sun in a way metal parts do not. There is one cartridge to pull and rinse when pressure tells you it is time, so routine service is quick.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627000246484,"sku":"WWP-05-9908","price":474.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a3cfbb2e-9279-4bae-b8e9-dbcc8b41882c.png?v=1788718900"},{"product_id":"roto-deluxe-jet-white","title":"Waterway Roto Deluxe Jet, White","description":"\u003cp\u003eThe Waterway Roto Deluxe Jet in white is Waterway part number 210-6090.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpa and pool jets are matched to the fitting body already set in the shell, so the safest way to buy is by part number. If the jet you are pulling out is a 210-6090, this is its replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJets take the brunt of chemistry and sunlight. They scuff, dull and discolor long before the plumbing behind them needs attention, and swapping the internal is a quick way to freshen the look of a spa or pool wall.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627001229524,"sku":"WWP-85-8009","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_7a63170e-6b94-41a4-972a-06708e621243.jpg?v=1788718924"},{"product_id":"4hp-executive-spa-pump-2-speed-230v-56fr-2","title":"Waterway 4HP Executive Spa Pump, 2 Speed, 230v, 56fr, 2\"","description":"\u003cp\u003eThe Waterway 3721621-1D is a 4HP Executive series spa pump, two speed, wired for 230 volts, on a 56 frame motor with 2 inch suction and discharge ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy two speed matters on a spa\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA spa spends most of its running hours filtering and heating, which needs very little flow. The low speed does that work quietly and cheaply. When the jets are called for, the high speed steps in and delivers the flow the therapy jets were designed around. One pump covers both jobs instead of running flat out all day.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCheck three things against the pump you are replacing: the supply voltage, the motor frame and the port size. This unit is 230v on a 56 frame with 2 inch ports, and all three have to match for a straight swap. Waterway lists it for spa and hot tub use.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627005882580,"sku":"WWP-10-1410","price":387.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_13e39f80-588e-4739-a7d8-2a61cbcdc841.jpg?v=1788718988"},{"product_id":"complete-vinyl-skimmer-standard-white","title":"Waterway Renegade Vinyl Liner Skimmer, White, 2-Port with Square Lid","description":"\u003cp\u003eThe Waterway 540-8400 is a complete Renegade vinyl liner pool skimmer in white, with a two port body and a square lid.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVinyl liner construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Renegade body is made for vinyl pools, mounting through the wall against the liner with the faceplate sealing to it. It is the usual replacement when the original skimmer has cracked at the throat, split at the port, or started weeping behind the faceplate where the leak is hard to chase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTwo ports and a square lid\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe two port body gives you a second plumbing connection for a main drain or an equalizer line rather than a single suction line. The lid is the square style, so check the deck cut out or the coping opening you already have before ordering.\u003c\/p\u003e\u003cp\u003eIt ships as the complete skimmer in standard white.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627362136276,"sku":"WWP-25-1687","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bc3d1f67-2b41-4309-8002-3465bc21045d.jpg?v=1788722850"},{"product_id":"waterway-plastics-570-0425-07-crystal-water-cartridge-filter-425-sq-ft-150-gpm","title":"Waterway Crystal Water Cartridge Pool Filter, 425 sq ft","description":"\u003cp\u003eThe Waterway Crystal Water is a 425 square foot cartridge pool filter with an NSF flow rate of 150 GPM, enough to turn over 72,000 gallons in an eight hour cycle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFour cartridges, not one\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe filter uses the industry proven quad element layout. Splitting the media across four cartridges makes each one light enough to lift out on its own and spreads the dirt load, which is what lets the filter run longer between cleaning cycles than a single element of the same total area.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTank and hardware\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe body is fiberglass reinforced polypropylene, chosen for strength and chemical resistance. Internal piping is 2-1\/2 in., and the filter comes with 2-1\/2 in. valve bulkhead unions plus 2 in. and 1-1\/2 in. reducers so it plumbs into existing pipe. A heavy duty tamper proof clamp with its own removal tool closes the tank, a stainless steel pressure gauge with a Start-Service dial reads the pressure, and a 1-1\/2 in. bottom clean-out port drains the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCartridge now, D.E. later\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe same tank converts to a D.E. filter by changing the internals, so the choice of media is not locked in at purchase. The filter carries a multi handle design for lifting and is NSF listed.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627366363348,"sku":"WWP-05-4081","price":1266.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_bf8fe210-7e9a-41d9-a5a6-05c8110700c3.jpg?v=1788722871"},{"product_id":"2-union-male-pipe-thread-by-female-slip","title":"Waterway 2\" Union, Male Pipe Thread by Female Slip","description":"\u003cp\u003eThe Waterway 400-5080 is a 2 in. union with male pipe thread on one end and a female slip socket on the other. It is the fitting that joins 2 in. pool pipe to a threaded pump or filter port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the union matters\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery piece of equipment on a pad eventually comes off for service or replacement. A union in the line means that job is a matter of loosening a collar by hand. Without one it means a saw, new pipe and fresh glue, and a plumbing repair on top of the original job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe threaded end screws into the equipment port with PTFE tape or a pool rated thread sealant, tightened by hand plus a modest turn. The slip end is solvent welded to 2 in. pipe. Keep sealant out of the slip socket so the joint bonds properly.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627373801684,"sku":"WWP-56-4517","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f1061a71-b6de-4722-860f-cf6ab564caec.jpg?v=1788722901"},{"product_id":"weir-door-assembly-white","title":"Waterway Weir Door Assembly, White","description":"\u003cp\u003eThe Waterway 550-9950 is the white weir door assembly for the Waterway Renegade pool skimmer. It is the hinged flap that sits in the throat of the skimmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the weir is for\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe weir floats up so its top edge rides just at the water line. That forces the skimmer to draw the thin surface layer, which is where oils, pollen, dust and floating leaves collect. Take the weir away and the skimmer pulls from the full depth of the opening, and surface debris simply drifts past.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe other half of the job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen the pump shuts off, the weir falls closed and holds whatever is in the basket. Without it, an afternoon of collected leaves floats straight back into the pool overnight. A weir that is cracked, stuck or gone is worth replacing on both counts.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627380617428,"sku":"WWP-251-2081","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_deece006-b905-4f1b-ad3e-c5a7de712355.jpg?v=1788722922"},{"product_id":"3-8-drain-plug-black","title":"Waterway 3\/8\" Drain Plug, Black","description":"\u003cp\u003eThe Waterway 715-1201 is the black 3\/8 in. quarter slot drain plug used on Waterway pool pumps, including the Hi-Flo and the Executive 56 frame models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmall part, real job\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe drain plug is how water gets out of the strainer pot and volute. Before a freeze that is not optional: water left in a pump housing expands as it freezes and cracks the plastic, which turns a five dollar part into a new wet end. It comes out again any time the pump is opened for service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the seal at the same time\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlugs are usually replaced because the old one is cross threaded, stripped in the slot or weeping. The seal at the plug is a separate Waterway o-ring, so pick one up with the plug rather than reusing a seal that has been compressed for several seasons.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627381108948,"sku":"WWP-101-1201","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e420d17a-a2ef-46ad-9071-870adf271867.jpg?v=1788722926"},{"product_id":"top-manifold-w-air-screen","title":"Waterway Top Manifold with Air Screen","description":"\u003cp\u003eThe Waterway 550-4200 is the top manifold with air screen for the Crystal Water DE filter. It is the part inside the tank that the grid pack seats into.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFiltered water leaves each DE grid through its top port and gathers in the manifold before heading back to the pool. The manifold holds the grids in position and keeps the clean side of the filter separated from the dirty side. The air screen on top handles air that works its way to the highest point of the tank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy it gets replaced\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eManifolds crack. Years of heat cycling, the odd knock during a grid cleaning and any freeze that catches water in the tank all take their toll. Once there is a split, DE powder bypasses the grids and goes straight back to the pool, so the water stays cloudy and the filter never seems to hold a charge. Check the manifold whenever the grid pack is out.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627383140564,"sku":"WWP-051-4200","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_f337d3af-1e8a-4a31-a574-530712a87e30.jpg?v=1788722931"},{"product_id":"drain-plug-o-ring-2","title":"Waterway Hi-Flo Pump Drain Plug O-Ring","description":"\u003cp\u003eWaterway 805-0111 is the drain plug o-ring used on the Hi-Flo, Center Discharge, and Executive 48 and 56 frame pool pumps. It is the genuine Waterway part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe part behind a weeping plug\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe drain plug does not seal on its threads, it seals on this o-ring pressing against the seat. Once the ring has taken a set, split, or picked up grit, the plug leaks and no amount of extra torque fixes it. Worse, on the suction side a weeping plug pulls air rather than pushing water, which shows up as a pump that struggles to hold prime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWinterizing habit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDrain plugs come out every fall and go back every spring, and that cycle is exactly what wears the o-ring. Fit a new one at opening, put a thin film of pool grade silicone lubricant on it, and start the season with a dry pump.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627567886548,"sku":"WWP-101-0111","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_ef2db6c2-3cd1-484a-bda3-c32969ab91d5.jpg?v=1788723719"},{"product_id":"o-ring-for-6-trap-cover","title":"Waterway O-Ring for 6\" Trap Cover","description":"\u003cp\u003eWaterway 805-0436 is the lid o-ring for the 6 inch pump trap cover. It seals the clear lid against the strainer pot, which is what lets the pump hold a vacuum and keep its prime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe size\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe ring measures 5-7\/8 inches inside diameter and 6-3\/8 inches outside diameter, with a 1\/4 inch cord thickness. It is used on Waterway Hi-Flow, Champion 56 and Center Discharge pool pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePool chemistry and heat harden the rubber over time. Once the ring flattens, cracks or takes a permanent set, the lid stops sealing and the pump starts drawing air at the trap. Symptoms are a pump that will not prime, a basket that never fills, or a trickle of water weeping past the lid. Replacing the ring is a two minute job and it is worth keeping a spare on hand.\u003c\/p\u003e\u003cp\u003eClean the groove and the sealing face before fitting the new ring, then seat the lid by hand. A thin film of silicone o-ring lubricant helps it sit evenly and keeps the lid from sticking.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627570770132,"sku":"WWP-101-8056","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_4b183d7c-3890-4c31-8745-8748a604685b.jpg?v=1788723755"},{"product_id":"7-nozzle-jet-int-poly-massage-deluxe-blk","title":"Waterway Deluxe 7-Nozzle Scalloped Large Face Massage Poly Jet Internal, Black","description":"\u003cp\u003eThe Waterway 210-6701 is a deluxe massage poly jet internal in black, with seven nozzles behind a scalloped large face. It is the internal only, designed to fit a poly jet body already installed in the wall.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the seven nozzles do\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA single nozzle jet concentrates its flow in one place. This one splits the same flow across seven nozzles behind a large face, which spreads the massage over a wider area and softens the point pressure. The scalloped trim ring is the visible part at the wall, and its finish sets the look of the jet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacing the internal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eJet internals take the abuse while the buried plumbing stays untouched. Sun and pool chemistry dull the face, scale locks up the nozzle movement, and trim rings crack. Because the internal is a separate piece from the wall fitting, a jet can be brought back to new condition without opening anything up. Match the black finish across the rest of the jets so the wall stays consistent.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627595608276,"sku":"WWP-85-7005","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_73e20bcf-c76e-4437-88a5-7b10b6677a86.jpg?v=1788724049"},{"product_id":"lid-o-ring-od-16-1-4","title":"Waterway Clearwater II Tank Lid O-Ring, OD 16-1\/4\"","description":"\u003cp\u003eWaterway 805-0460 is the tank lid O-ring for the Clearwater II filter, with a 16-1\/4 inch outside diameter. It is the seal between the lid and the tank, and it is what lets a filter hold pressure without leaking.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe symptom\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lid ring almost always announces itself the same way. The filter is fine while the pump is off, then weeps, drips or sprays from the lid seam once the system comes up to pressure. Pull the lid and the old ring will usually be flat sided instead of round, hard instead of supple, or nicked from a previous opening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the groove and the sealing face before the new ring goes in, since a single piece of grit will hold the joint open. Use a silicone based lubricant intended for pool O-rings and keep petroleum grease away from it. Seat the ring evenly all the way round, then close the lid to the manufacturer figure rather than as tight as it will go, because overtightening damages the ring you just fitted.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48627600326868,"sku":"WWP-051-0460","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1ee0fc62-a039-43e7-bcdc-2afcd6a45fea.jpg?v=1788724079"}],"url":"https:\/\/www.activepoolsupply.com\/collections\/waterway.oembed","provider":"Active Pool Supply","version":"1.0","type":"link"}