{"product_id":"90-2-elbow-2-sch40","title":"Lasco 90 Degree Elbow, 2 in. SCH 40 PVC","description":"\u003cp\u003eThe Lasco 406-020 is a two inch schedule 40 PVC 90 degree elbow with slip sockets on both ends, the standard direction change fitting for pool and spa equipment plumbing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlip by slip\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth ends are sockets that solvent weld onto 2 in. SCH 40 pipe. There are no threads, so this fitting goes between two lengths of pipe rather than onto a threaded port. If you need to land on a pump or a valve with a male thread, you want an adapter, not this elbow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCut the pipe square and deburr the end, then prime and cement both the socket and the pipe per the solvent cement instructions, push the joint home and give it a quarter turn to spread the cement. Give it the cure time the cement calls for before the pump goes back on. A joint that was only dry fitted will separate under pressure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHard 90 or sweep\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA hard 90 turns the water in a shorter distance than a sweep elbow and costs more head loss doing it. On a short run or a tight equipment pad that is a fair trade. On a long suction line, or a system where you are chasing pump efficiency, the sweep version of the same size is worth the extra room it needs.\u003c\/p\u003e","brand":"Lasco Fluid Distribution Produ","offers":[{"title":"Default Title","offer_id":48628963180756,"sku":"LAS-56-4063","price":15.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_1c8156cc-0621-4e55-b3d3-176ce32aca9b.jpg?v=1788758498","url":"https:\/\/www.activepoolsupply.com\/products\/90-2-elbow-2-sch40","provider":"Active Pool Supply","version":"1.0","type":"link"}