{"product_id":"housing-gasket-3000-series","title":"Hayward Housing Gasket, 3000 Series","description":"\u003cp\u003eThe Hayward SPX3000T is the rubber housing gasket used on 3000 series pumps. Hayward lists it for the Super II SP3000 and SP3000X and for the Heldor EZ-Flo, and the same part shows up in the Leslies Hydramax II parts listing for models SP-LE40010 through 40019.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it seals\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe gasket sits at the joint where the pump housing meets the seal plate. It has to hold that face watertight while the pump runs under suction on one side and pressure on the other. Over years of heat cycling the rubber hardens, takes a permanent set and loses the squeeze it needs, which shows up as a slow weep at the seam rather than an obvious leak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny time the pump comes apart, this gasket is worth replacing rather than reusing. Refitting a compressed gasket onto a clean face is the most common reason a rebuilt pump still drips.\u003c\/p\u003e","brand":"Hayward","offers":[{"title":"Default Title","offer_id":48633927467220,"sku":"HAY-101-2067","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_517a1d19-6ff4-42f5-9141-eed33e06a88d.png?v=1788817355","url":"https:\/\/www.activepoolsupply.com\/products\/housing-gasket-3000-series","provider":"Active Pool Supply","version":"1.0","type":"link"}