{"product_id":"impeller-1-5hp-hi-flo","title":"Waterway Impeller 1.5HP (Hi Flo)","description":"\u003cp\u003eThe Waterway 310-4010 is the 1-1\/2 HP impeller for the Hi Flo pump, a six vane gray plastic impeller with an extended inlet. It is the genuine Waterway part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to confirm the fit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eImpellers look alike across a pump family but are sized to horsepower, so measure and read the molding before ordering. This one is 3-5\/8 inches across the outside and 3-3\/16 inches from the end of the shaft to the front of the intake. The extended inlet is 1 inch long with a 1-1\/2 inch inside diameter and a 1-7\/8 inch outside diameter. The inlet side is molded SIDE DISH COVER 313-1530 and ASSY 310-4010-D - 1 1\/2 HP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDetails worth noting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn the shaft side there is a small raised ring around the shaft, 5\/16 inch tall with an outside diameter of 1-9\/16 inches, plus a small ridge running around the outside diameter of the impeller. Those two features are the quickest way to tell this part from a similar looking impeller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhile the wet end is open\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTaking an impeller off disturbs the shaft seal, so fit a new seal at the same time rather than reusing one that has been moved. Look at the wear ring as well, since a scored ring will take the edge off a new impeller inside a season.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":48628895547604,"sku":"WWP-85-8034","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_466ee971-f5ad-4e5a-b610-91476de9f576.jpg?v=1788757064","url":"https:\/\/www.activepoolsupply.com\/products\/impeller-1-5hp-hi-flo","provider":"Active Pool Supply","version":"1.0","type":"link"}