{"product_id":"lock-ring-2","title":"Jacuzzi Replacement Lock Ring","description":"\u003cp\u003eThis is the Jacuzzi replacement lock ring, catalogued as 42282806R and carrying 011202 stamped into the ring itself. It measures 7-3\/8 inches across the bottom outside diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIdentify it by measurement\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe source records list this ring against more than one Jacuzzi family. It appears under the Splash Pak UD-S pump models, and it is also referenced alongside the CFR Series inline filters and the Magnum, Magnum Plus and Magnum Force pumps. Rather than choosing between those, both are given here. The reliable check is physical: look for 011202 in the moulding and measure the bottom outside diameter at 7-3\/8 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy rings fail\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA lock ring lives outdoors under UV and takes a hand tightening every time the basket is cleaned. Over years the plastic goes brittle, the threads round off, and eventually a lug shears while someone leans on it. A ring that will not draw the lid down tight is also the most common source of an air leak, which shows up as a pump that will not hold prime or a strainer pot that never fills. Replace the lid o-ring at the same time, because a new ring cannot compensate for a hardened seal.\u003c\/p\u003e","brand":"Optimus Pool Products L.l.c.","offers":[{"title":"Default Title","offer_id":48634525319380,"sku":"JAC-101-9005","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2b903320-4423-472a-b94c-dc10d97be21f.jpg?v=1788833833","url":"https:\/\/www.activepoolsupply.com\/products\/lock-ring-2","provider":"Active Pool Supply","version":"1.0","type":"link"}