{"product_id":"motor-full-rated-1-hp-115-230v","title":"Century Motor, Full Rated, 1 HP, 115\/230V, SQ1102","description":"\u003cp\u003eThe Century SQ1102 is a full rated square flange pool pump motor, 1 HP output at 3450 rpm with a 1.65 service factor, wired for either 115 or 230 volts on a 48Y frame.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuild\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt uses sealed ball bearings at both ends and a 303 stainless steel shaft, in a capacitor start, open dripproof design with automatic thermal protection. The frame is rolled steel with a round mount, and the motor is built to the UL 1081 design and CSA certified. Rated efficiency is 55.2 percent and the duty rating is continuous.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitting\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe SQ1102 is listed for the Sta-Rite Dura-Glas and Max-E-Glas I and II and for the Sta-Rite Max-E-Pro. Key dimensions are an overall length of 13.82 in, a frame length of 9.94 in, a shaft diameter of 0.625 in with a 0.906 in extension and a 1\/2 in threaded end, and the rotation is counterclockwise seen from the pump end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompare the nameplate on your old motor for horsepower, service factor, frame and shaft, since the same wet end was sold behind several motor ratings. While the pump is apart, replace the shaft seal. A leaking seal is what drowns most pool motors, and it is the cheapest part of the job.\u003c\/p\u003e","brand":"Century Motors","offers":[{"title":"Default Title","offer_id":48628861042900,"sku":"AOS-60-5059","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_39aba67e-96f8-401e-aac8-26a346740d44.jpg?v=1788755600","url":"https:\/\/www.activepoolsupply.com\/products\/motor-full-rated-1-hp-115-230v","provider":"Active Pool Supply","version":"1.0","type":"link"}