{"product_id":"o-ring-plm-after-2-97","title":"SuperPro Generic Filter Tank O-Ring for Sta-Rite PLM, After 2\/97","description":"\u003cp\u003eThis is the SuperPro generic tank o-ring for Sta-Rite PLM filters built after February 1997. It is the seal that sits between the two halves of the filter tank, listed at a 15-1\/4 inch inside diameter with a 3\/8 inch cross section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMatching the number\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOur record carries the Sta-Rite equivalent two ways. The product summary calls it 27001-0061 and the substitute part number field lists 27001-0061S. Likewise the SuperPro number appears both as O-484-9 and, in shorter form, as O-484. Compare the number on your filter documentation against all of these rather than assuming one is a typo.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore you fit it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm the build date of the tank, because PLM filters made before 2\/97 use a different ring and the two will not swap. When you assemble, wipe the groove clean and put a light smear of silicone lubricant on the o-ring. It seats properly, it is less likely to roll out of the groove as the clamp comes down, and it will come apart cleanly the next time the filter is opened.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGeneric or genuine\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the aftermarket SuperPro ring. If you would rather fit the factory part, the genuine Sta-Rite tank o-ring for the same after 2\/97 application is stocked on its own.\u003c\/p\u003e","brand":"Aladdin","offers":[{"title":"Default Title","offer_id":48633781125332,"sku":"SPG-601-1216","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_e7b194fd-e87c-4b2d-ad20-bd822a0e515e.jpg?v=1788816184","url":"https:\/\/www.activepoolsupply.com\/products\/o-ring-plm-after-2-97","provider":"Active Pool Supply","version":"1.0","type":"link"}