{"product_id":"o-ring-tail-piece-set-of-2","title":"Jandy O-Ring, Tail Piece (Set of 2)","description":"\u003cp\u003eJandy R0446400 is the tail piece o-ring, supplied as a set of two. It seals the union tail pieces on Jandy pumps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere it sits\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery Jandy pump connects to the plumbing through unions. The tail piece threads into the pipe, the nut pulls it up against the pump port, and this o-ring is the only thing making that joint watertight. Because there is one at the suction side and one at the discharge, Jandy sells the o-ring in pairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen to change it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA union that weeps or drips at the nut is almost always an o-ring problem, not a tightness problem. Once the rubber has hardened, cracked or taken a permanent flat spot, tightening the nut harder just distorts it further. Back the union off, pull the old o-ring, wipe the groove clean, fit the new one with a pool grade lubricant and hand tighten the nut.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis o-ring is listed for the Jandy Stealth series pumps, the Jandy ePump variable speed pumps and the Jandy WaterFall series pumps.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48626104729812,"sku":"TLD-101-2021","price":15.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_24b7168c-b731-4b61-a7ba-5bf631c0213a.png?v=1788704836","url":"https:\/\/www.activepoolsupply.com\/products\/o-ring-tail-piece-set-of-2","provider":"Active Pool Supply","version":"1.0","type":"link"}