{"product_id":"pump-lid-seal-gasket-with-o-ring","title":"Jandy Pump Lid Seal Gasket with O-Ring","description":"\u003cp\u003eThe Jandy R0449100 kit replaces both sealing parts under the strainer lid on PlusHP, MaxHP and WaterFeature pumps: the lid seal gasket, which has a rectangular cross section, and the round o-ring. When a pump starts drawing air at the lid, these two parts are the fix.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlusHP PHPF and PHPM, MaxHP MHPM and WaterFeature WFTR series pumps. The o-ring measures roughly 6-3\/16 in. outside, 5-13\/16 in. inside and 3\/16 in. thick. The seal is roughly 6-1\/8 in. outside, 5-3\/8 in. inside and 3\/8 in. front to back. Jandy gives these as approximate figures, so use them to confirm you have the right family of pump rather than as exact machining dimensions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSymptoms of a worn seal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBubbles collecting under the clear lid while the pump runs, a pump that takes longer and longer to prime, or a lid you have to crank down harder each season to stop the hiss. Any of those points to the lid seal, and a new seal and o-ring are far cheaper than a lock ring cracked from overtightening.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstalling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eClean the lid groove and the housing face, seat the new seal and o-ring dry or with a light film of silicone based lubricant, and tighten the lid by hand.\u003c\/p\u003e","brand":"Zodiac","offers":[{"title":"Default Title","offer_id":48625006018772,"sku":"TLD-101-2018","price":19.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_a885e7ee-a9c9-489d-86f1-fb729c7ff196.jpg?v=1788661967","url":"https:\/\/www.activepoolsupply.com\/products\/pump-lid-seal-gasket-with-o-ring","provider":"Active Pool Supply","version":"1.0","type":"link"}