{"product_id":"raypak-014325f-ignition-control-pim-mvb-xtherm","title":"Raypak 014325F PIM Ignition Control Single Try","description":"\u003cp\u003eRaypak 014325F is the PIM ignition control in its single try version. Raypak references it for the MVB and Xtherm heater lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat the module does\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery call for heat runs through the ignition control. It handles the pre purge, energizes the ignitor, opens the gas valve, and watches for a proven flame within its trial window. If flame is not proved, it shuts the gas off and locks out. That last behavior is the reason a failed module is so often mistaken for a gas supply problem: the heater goes through the motions and then stops, with no obvious fault at the burner.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSingle try versus multi try\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the single try control, meaning one ignition trial per call for heat. Raypak also lists a multi try ignition control under its own part number. The two are not interchangeable in practice, so match the version your heater was built with rather than choosing on price or availability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore replacing it\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRule out the simple causes first. Gas pressure, a cracked or contaminated ignitor, and flame sense wiring all produce the same no fire symptom, and they are cheaper to check than a control module is to swap.\u003c\/p\u003e","brand":"Raypak","offers":[{"title":"Default Title","offer_id":48627955106004,"sku":"RAY-014325F","price":606.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/default_2308bb85-2442-4f63-b1bc-cda907446a15.png?v=1788730925","url":"https:\/\/www.activepoolsupply.com\/products\/raypak-014325f-ignition-control-pim-mvb-xtherm","provider":"Active Pool Supply","version":"1.0","type":"link"}