{"product_id":"sr-smith-ml300-new-construction-jig-with-anchors-500-5000a","title":"S.R. Smith New Construction Anchor Jig with Anchors for ML300 Pool Lifts, 500-5000A","description":"\u003cp\u003eThe S.R. Smith 500-5000A is the new construction anchor jig with anchors for the ML300. It sets the flush deck anchors at the right spacing and height when the lift location is part of a new pool deck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is in the kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe New Construction Jig appendix in the multiLift2 owner manual lists three items under 500-5000A: one multiLift new construction anchor jig, part 300-6701; eight galvanized steel hex nuts, part 800-0132; and four multiLift flush deck anchors, part 900-6700. The 500-5000 is the same jig and hardware without the flush deck anchors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSetting the anchors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen you assemble the flush deck anchors to the jig, S.R. Smith says the distance between the top surface of the jig and the top of each anchor must be 2.5 in. The manufacturer recommends that deck anchors be installed by a person familiar with installing pool deck equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003emultiLift2\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe multiLift2 manual says the multiLift2 can be installed using existing multiLift and ML300 anchors, so anchors set with this jig leave that upgrade open.\u003c\/p\u003e","brand":"S.R. Smith","offers":[{"title":"Default Title","offer_id":67702471819476,"sku":"PSU-154927","price":404.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/9568\/2516\/files\/154927_0_20151020104720.jpg?v=1791855465","url":"https:\/\/www.activepoolsupply.com\/products\/sr-smith-ml300-new-construction-jig-with-anchors-500-5000a","provider":"Active Pool Supply","version":"1.0","type":"link"}