Raypak HI Delta P2342C Commercial Pool Heater with H-Style Bypass and Versa IC Controller | Propane Gas 2,340,000 BTUH | 016083

• 83.1% efficiency
• Elevation: 0-5000 Feet
• Multiple vertical venting and sidewall venting options. No extractor required for sidewall applications up to 70ft on room air
• All models indoor/outdoor certified
• Patented burner "security blanket" enhances staged combustion, minimizes installation/start-up issues, and protects burners from metal fatigue
• 105ºF minimum inlet water temperature
• Cupro-nickel finned-tube heat exchanger with brass headers. AB 1953 compliant
• VERSA IC® control package with LCD display
• Status display lights
• Cascade control of up to 4 units, no external sequencer required
• Diagnostics center with history in English , not in codes
• Modbus RTU BMS port (RS485)
• 0-10 VDC BMS Interface (set point or direct drive)
• Ducted combustion air capable. TruSeal® CSA-Certified direct-vent available
• Models 992C-2002C certified to SCAQMD Rule 1146.2. Meets all Low NOx regulations
• All models except 2002C available for natural gas and propane. Model 2002C available for natural gas only
• Certified to the ANSI Z21.56 pool heater standard

• The standard external bypass uses an external bypass to achieve cold-water protection
• All units available without an external bypass; cold-water protection provided in the field
• The Cold Water Run (CWR) option provides electronic control of a variable-speed pump to continuously adjust bypass flow, achieving real-time cold-water protection

Brand: RAYPAK

REQUIRED FOR WARRANTY

Register your product online at www.raypak.com/warranty.

 

SCOPE OF WARRANTY

Raypak, Inc. (Raypak) warrants to the original owner when installed in the contiguous 48 states of the United States of America with a pool or spa by a properly licensed installer will be free from defects in materials and workmanship under normal use and service for the Applicable Warranty Period. Under this Limited Warranty, Raypak will, at its option, repair or furnish a replacement for any defective part of the HEATER. The repair or replacement will be warranted for only the unexpired portion of the original Applicable Warranty Period or the Extended Warranty Period, as the case may be.

 

EFFECTIVE DATE

The Effective Date of Warranty coverage is the date of original installation if properly documented; otherwise it is the date of manufacture plus 30 days. All Applicable Warranty Periods specified in this Limited Warranty are measured from the Effective Date.

 

APPLICABLE WARRANTY PERIOD – UNREGISTERED

If the HEATER is installed with a pool or spa, the Applicable Warranty Period is ninety (90) days from the Effective Date, parts and labor, for the HEATER and component parts.

 

EXTENDED WARRANTY PERIOD – SERVICE PROFESSIONAL

If, within 90 days of the Effective Date, (i) the HEATER is installed in a pool or spa at a single family residential dwelling by a properly licensed installer (in accordance with applicable state and local laws and regulations), and (ii) registered with Raypak (www.raypak.com) with an installation receipt attached to such registration, then the Applicable Warranty Period is two (2) years from the Effective Date for the HEATER and component parts. If the Heater is installed anywhere other than a single family residential dwelling, the Applicable Warranty Period for the Heater and component parts is limited to only one (1) year, parts and labor.

 

EXTENDED WARRANTY PERIOD – BUILDER, NEW CONSTRUCTION

If, within 90 days of the Effective Date, (i) the HEATER is installed) in a pool or spa at a single family residential dwelling by a properly licensed installer (in accordance with applicable state and local laws and regulations), (ii) registered with Raypak (www.raypak.com) with an installation receipt attached to such registration, then the Applicable Warranty Period is three (3) years from the Effective Date for the HEATER and component parts. If the Heater is installed anywhere other than a single family residential dwelling, the Applicable Warranty Period for the Heater and its parts is limited to only one (1) year, parts and labor.

 

LABOR AND SHIPPING COSTS

This Limited Warranty covers the reasonable cost of labor for repairs or replacements covered by this Limited Warranty, provided that said repairs or replacements are performed by a Raypak designated service provider during the Applicable Warranty Period and Raypak has preauthorized said repair or replacement. This Limited Warranty does not cover any travel time or other labor costs. Furthermore, unless applicable state law provides otherwise, this Limited Warranty does not cover any shipping costs to and from the service provider or to or from the installation site. All of the foregoing costs and expenses are your responsibility.

 

WARRANTY EXCLUSIONS

This Limited Warranty does NOT apply:

1. if the product has been moved from its original place of installation, or if the original owner no longer owns the property where the original installation was made; 
2. if the product is not properly installed with a pool or spa by a qualified licensed installer in accordance with applicable local codes and ordinances, good trade practices, and the manufacturer’s installation instructions;
3. if the rating plate(s) or serial number(s) are altered or removed; 
4. if the product is modified in any way, or non-factory authorized accessories or other components are used in conjunction with the product; 
5. to damage, malfunctions or failures resulting from failure to properly install, operate or maintain the product in accordance with the manufacturer’s instructions; 
6. to damage, malfunctions or failures from abuse, act of nature, accident, fire, flood, freeze, lightning or the like; 
7. to damage, malfunctions or failures resulting from [or due to] connected system control devices; 
8. to performance problems caused by improper sizing of the heater or electric service voltage, wiring or fusing; 
9. to use of any attachment, including any energy saving device not authorized by the manufacturer. 
10. to damage, malfunctions or failures from misuse or neglect, including but not limited to, freeze-ups, operating the heater with the cabinet door off, having flow restrictions or obstructions between the heater outlet and the pool/spa, or not maintaining a proper chemical balance (PH level must be between 7.4 and 7.8 and total alkalinity between 100 and 150 PPM. Total dissolved solids (TDS) must be no greater than 3000 PPM). In salt water chlorinated pools, TDS must be no greater than 6000 PPM). 
11. to Raypak supplied anodes, which are not covered under warranty. The anode is a sacrificial protection device and will wear out and need to be replaced. Damage caused to the heater due to a depleted anode that has not been replaced may affect the warranty of the heat exchanger. 

 

Register your product online at www.raypak.com/warranty.