Glacier Ice Block Residential Pool Cooler | 30 GPM 20,000 Gallons | GPC-25

The Glacier Ice Block pool cooler is a perfect solution to uncomfortably warm water for medium-sized residential pools. Glacier swimming pool chillers are designed to solve the problem of hot pool water by taking the heat out of the water, and cycling the cool water back into your pool. Depending on the size and finish of your pool, the cooler can lower its temperature from 10 to 15 degrees Fahrenheit in 12 to 14 hours (note: pool finishes and bottoms that absorb heat more readily, such as quartz or dark tile, can take longer to fully cool). You'll never see it on your utility bill, but you will see it on your friends and family's faces when they're splashing around in your cool and refreshing pool in the peak of summer!

Residential pools come in all shapes, sizes, and finishes. Glacier Pool Coolers has created a unit to fit your pool’s needs. The ICE BLOCK (GPC-25) will efficiently cool a pool up to 20,000 gallons, and the ICEBERG (GPC-210) can cool larger backyard pools up to 30,000 gallons and the ICEBERG (GPC-215) can cool larger backyard pools up to 45,000 gallons. However, if your pool has a pebble finish (any color), quartz, tile, or any dark colored plaster bottom and your pool volume is close to the gallon limits above, you should go up one size when choosing your unit.

Not only will your pool be refreshing during those hot summer months but your pool water chemistry will be easier to maintain.

A 10 degree drop in water temperature (95' to 85') can result in a savings of 20-25% on chemical consumption.

Glacier Pool Coolers are the best available answer to the hot pool water problem because:

1. It is a fan based system not a heat pump, so it does not need Freon nor does it require the expense of operating a heat pump.
2. It is easily incorporated into your pool plumbing system and automated control systems.
3. It costs pennies a day to operate. If your pool water is hot, then we are the solution to your problem!
4. It doesn't matter if you're in the high desert or the Deep South, Glacier Pool Coolers can cool any pool anywhere!

How Glacier Pool Coolers work:

After the water passes through the filter, a bypass is installed to the Glacier Pool Cooler. The pressurized water flows over a medium and is chilled by airflow created by the unit’s fan. The chilled water is pumped back into the pool through its returns.

Glacier Pool Cooler features:

• Decreases the pool water temperature 10-15 degrees in 12 to 14 hours on average (residential pools) *See water temperature disclaimer below.
• Saltwater pool friendly
  
• Optional temperature controls for manual pool systems.
• Easy installation and maintenance.
• Runs with your pool pump and automated systems.
• Energy efficient (low amperage output) 110/115V 8.5 Amps 60/50Hertz.
• Single inlet/outlet lines (1.5" diameter)
  

• Optional temperature controls for manual pool systems
• Suitable for standard or saltwater pools up to 20K gallons
• Runs with your pool pump and automated systems and energy efficient
• Decreases the pool water temperature 10-15 degrees in 12 to 14 hours
• Easy installation and maintenance